OAM- http header containing old value

Hi,
I am using OAM to protect one web application and need to pass few http headers to the application for funtioning.
Issue is one of my http header takes older value only even after its value is changed in repository. Due to this user is stuck in that loop only for some time and after 15-20 mins it gets updated in http header.
Please let me know what could be the reson for this. Is this caching issue? if yes where excatly can this be updated.
Thanks
Sandy

Hi Sandy,
Yes, it sounds like a caching issue. If the user has an existing OAM session when the attribute is changed, the attribute is stored in the Access Server cache. You can lower the cache (Access Server settings) but this couls have a detrimental effect on perfomance. If you are updated the attributes from the WebPass, then you can enable automatic cahce flushing for this purpose. (Answer assume OAM 10g, by the way.)
Regards,
Colin

Similar Messages

The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.

Hello. I added custom http response headers to my SP site web config file as follows:
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Methods" value="POST,GET,OPTIONS" />
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Headers" value="Content-Type,Authorization" />
</customHeaders>
</httpProtocol>
When I try to call any web service, i get these headers two times each:
HTTP/1.1 200 OK
Cache-Control: private, max-age=0
Transfer-Encoding: chunked
Content-Type: application/atom+xml;type=entry;charset=utf-8
Expires: Sat, 01 Mar 2014 19:11:37 GMT
Last-Modified: Sun, 16 Mar 2014 19:11:37 GMT
ETag: "3"
X-SharePointHealthScore: 0
SPClientServiceRequestDuration: 20
SPRequestGuid: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
request-id: b4e77d9c-bfc3-a050-493a-ca5d251d1a72
X-FRAME-OPTIONS: SAMEORIGIN
Persistent-Auth: true
Access-Control-Allow-Methods: POST,GET,OPTIONS
Access-Control-Allow-Origin: *
Access-Control-Allow-Headers: Content-Type,Authorization
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Access-Control-Allow-Methods: POST,GET,OPTIONS
Access-Control-Allow-Origin: *
Access-Control-Allow-Headers: Content-Type,Authorization
MicrosoftSharePointTeamServices: 15.0.0.4569
Date: Sun, 16 Mar 2014 19:11:37 GMT
and that gives me error from ajax: The 'Access-Control-Allow-Origin'
header contains multiple values '*, *', but only one is allowed. Origin 'null' is therefore not allowed access.
The 'Access-Control-Allow-Origin' header contains multiple values '*, *', but only one is allowed.
Origin 'null' is therefore not allowed access.
Any idea???

Hi Ann,
Please check whether there are duplicate custom headers in your code.
Similar issue for your reference:
http://social.msdn.microsoft.com/Forums/office/en-US/b79b75f4-b46b-46ae-ae29-17a352b6b90b/custom-http-response-headers-for-sp-2013-shown-2-times?forum=sharepointdevelopment
Regards,
Rebecca Tu
TechNet Community Support

List ItemRenderer contains old values

Hi Everyone,
I have used List for show the data from db. Data will update periodically. My problem is some rows contains old values. I have tried validateNow(), invalidateList...
But I cant achieve the result.
Kindly Suggest me the possible ways to reset the Data.
Thanks in Advance.
Arun P. Ganesh

If you are using custom ItemRenderer, you need to declare a variable within custom ItemRenderer and use that variable to display the data.

Table For Header Text Old Value

Hi,
Could Anyone helpme in finding the table for Header text of the PO , as We know to find the current PO Header Text,by usinf th FM READ_text but i want to to find the header text for the po before Updated , Thanks in advance
Regards
Priyanka M Jain

Hi,
I believe that you need the text just after entering in PO during the runtime.
just enter the text and go in the debugg mode, check for table text / textline in the global parameters and you will find the text.
Hope this helps,
Raj

JTextFields sometimes still contains old values even setText("") performed

I have a program which let user enter 3 JTextFields : hostname, userid, password, and one JButton. When the button is clicked, below function will be executed to get the value of the JTextField, then relevant function will be called.
My problem is when I run the program, sometimes it will get the "previous" value, sometimes it works correctly. I make sure all JTextFields values will be cleared each time, but no help. Here is part of my code:
    private void sendActionPerformed(java.awt.event.ActionEvent evt) {
        String hn = hostname.getText();
        String ln = login.getText();
        String pd = password.getText();
        hostname.setText("");
        login.setText("");
        password.setText("");
        result.setText("");
        p = new Process();
        p.setPara(hn,ln,pd);
        result.setText(p.sendmail());
        p = null;
    }Does anyone have ideas or suggestion? Thx.

Ok, there are 2 files, the main class is the Email.java file.
Email.java
public class Email extends javax.swing.JFrame {
    /** Creates new form Email */
    public Email() {
        initComponents();
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    // <editor-fold defaultstate="collapsed" desc=" Generated Code ">
    private void initComponents() {
        jLabel1 = new javax.swing.JLabel();
        jLabel2 = new javax.swing.JLabel();
        jLabel3 = new javax.swing.JLabel();
        hostname = new javax.swing.JTextField();
        login = new javax.swing.JTextField();
        password = new javax.swing.JTextField();
        send = new javax.swing.JButton();
        jScrollPane1 = new javax.swing.JScrollPane();
        result = new javax.swing.JTextArea();
        jLabel4 = new javax.swing.JLabel();
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        jLabel1.setText("HostName (blank for localhost):");
        jLabel2.setText("Login:");
        jLabel3.setText("Password:");
        hostname.setText("smtp.test.com");
        login.setText("[email protected]");
        login.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                loginActionPerformed(evt);
        password.setText("mypassword");
        send.setText("Send");
        send.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                sendActionPerformed(evt);
        result.setColumns(20);
        result.setEditable(false);
        result.setLineWrap(true);
        result.setRows(5);
        jScrollPane1.setViewportView(result);
        jLabel4.setText("Result:");
        javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane());
        getContentPane().setLayout(layout);
        layout.setHorizontalGroup(
            layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
            .addGroup(layout.createSequentialGroup()
                .addContainerGap()
                .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                    .addGroup(layout.createSequentialGroup()
                        .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING, false)
                            .addComponent(jLabel2)
                            .addComponent(jLabel3)
                            .addComponent(jLabel1, javax.swing.GroupLayout.PREFERRED_SIZE, 159, javax.swing.GroupLayout.PREFERRED_SIZE))
                        .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                            .addGroup(layout.createSequentialGroup()
                                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                                .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING, false)
                                    .addComponent(hostname, javax.swing.GroupLayout.Alignment.TRAILING)
                                    .addComponent(login, javax.swing.GroupLayout.Alignment.TRAILING, javax.swing.GroupLayout.DEFAULT_SIZE, 249, Short.MAX_VALUE)))
                            .addGroup(javax.swing.GroupLayout.Alignment.TRAILING, layout.createSequentialGroup()
                                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                                .addComponent(password, javax.swing.GroupLayout.PREFERRED_SIZE, 249, javax.swing.GroupLayout.PREFERRED_SIZE)))
                        .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED))
                    .addGroup(layout.createSequentialGroup()
                        .addComponent(jLabel4)
                        .addGap(161, 161, 161)
                        .addComponent(send))
                    .addGroup(javax.swing.GroupLayout.Alignment.TRAILING, layout.createSequentialGroup()
                        .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED)
                        .addComponent(jScrollPane1, javax.swing.GroupLayout.DEFAULT_SIZE, 441, Short.MAX_VALUE)))
                .addGap(123, 123, 123))
        layout.setVerticalGroup(
            layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
            .addGroup(javax.swing.GroupLayout.Alignment.TRAILING, layout.createSequentialGroup()
                .addGap(24, 24, 24)
                .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
                    .addComponent(jLabel1)
                    .addComponent(hostname, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))
                .addPreferredGap(javax.swing.LayoutStyle.ComponentPlacement.RELATED, 12, Short.MAX_VALUE)
                .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE)
                    .addComponent(jLabel2)
                    .addComponent(login, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))
                .addGap(18, 18, 18)
                .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.TRAILING)
                    .addComponent(jLabel3)
                    .addComponent(password, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE))
                .addGap(20, 20, 20)
                .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                    .addComponent(jLabel4)
                    .addComponent(send))
                .addGap(20, 20, 20)
                .addComponent(jScrollPane1, javax.swing.GroupLayout.PREFERRED_SIZE, 132, javax.swing.GroupLayout.PREFERRED_SIZE)
                .addGap(110, 110, 110))
        pack();
    }// </editor-fold>
    private void sendActionPerformed(java.awt.event.ActionEvent evt) {
        String hn = hostname.getText();
        String ln = login.getText();
        String pd = password.getText();
        //result.setText("hn:"+hn+",ln:"+ln+"pd:"+pd);
        hostname.setText("");
        login.setText("");
        password.setText("");
        result.setText("");
        p = new Process();
        p.setPara(hn,ln,pd);
        result.setText(p.sendmail());
        p = null;
     * @param args the command line arguments
    public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                new Email().setVisible(true);
    // Variables declaration - do not modify
    private javax.swing.JTextField hostname;
    private javax.swing.JLabel jLabel1;
    private javax.swing.JLabel jLabel2;
    private javax.swing.JLabel jLabel3;
    private javax.swing.JLabel jLabel4;
    private javax.swing.JScrollPane jScrollPane1;
    private javax.swing.JTextField login;
    private javax.swing.JTextField password;
    private javax.swing.JTextArea result;
    private javax.swing.JButton send;
    // End of variables declaration
    private Process p;
Process.java
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
import java.io.*;
import java.util.Random;
public class Process {
private Boolean shouldAuth = false;
private String SMTP_HOST_NAME = "";
private String SMTP_AUTH_USER = "";
private String SMTP_AUTH_PWD = "";
private String emailMsgTxt;
private String emailSubjectTxt;
private String emailFromAddress;
private Boolean isError = false;
private String output = "";
private Random ran;
public Process(){}
public void setPara(String hostname, String username, String password){
      if((hostname.equalsIgnoreCase(""))||(hostname == null)){
        SMTP_HOST_NAME = "localhost";
            shouldAuth = false;
      }else{
          shouldAuth = true;
          SMTP_HOST_NAME = (hostname == "") ? "" : hostname;
          SMTP_AUTH_USER = (username == "") ? "" : username;
          SMTP_AUTH_PWD = (password == "") ? "" : password;
      emailFromAddress = "[email protected]";
      emailSubjectTxt = "testing email from abchk";
      emailMsgTxt = "This is a testing message to test the JavaMail.";
private class SMTPAuthenticator extends javax.mail.Authenticator{
      public PasswordAuthentication getPasswordAuthentication()
          String username = SMTP_AUTH_USER;
          String password = SMTP_AUTH_PWD;
          return new PasswordAuthentication(username, password);
public String debug(){
      String tmp = "Output is: ";
      ran = new Random();
      Integer no = ran.nextInt(100);
      return tmp + no.toString();
public String sendmail(){
    //Set the host smtp address
    Properties props = new Properties();
    props.put("mail.smtp.host", SMTP_HOST_NAME);
    props.put("mail.smtp.auth", (shouldAuth==true)? "true":"false");
    Session sess;
    if(shouldAuth==true){
        Authenticator auth = new SMTPAuthenticator();
        sess = Session.getDefaultInstance(props, auth);
        //System.out.println("true");
    }else{
        sess = Session.getInstance(props);
        //sess = Session.getDefaultInstance(props, null);
        //System.out.println("false");
    sess.setDebug(false);
    //Create a message
    Message msg = new MimeMessage(sess);
    //Set message
    String tmp = "";
    try{
      msg.setFrom(new InternetAddress(emailFromAddress));
      msg.setRecipients(Message.RecipientType.TO, InternetAddress.parse("[email protected]"));
      msg.setSubject(emailSubjectTxt);
      msg.setText(emailMsgTxt);
      Transport.send(msg);
    }catch(SendFailedException sfe){
      tmp += "SendFailedException:"+sfe.toString()+"\r\n";
    }catch(AddressException ae){
      tmp += "AddressException:" +ae.toString()+"\r\n";
    }catch(MessagingException me){
      tmp += "MessagingException:" +me.toString()+"\r\n";
    }catch(Exception e){
      tmp += "Exception:" + e.toString()+"\r\n";
    if(tmp.equalsIgnoreCase("")){
      tmp += "Email will be successfully delivered IF(*) information is correct.";
    String more = debug();
    return tmp + "\r\n" + more;
}the problem was described as the 1st post, after pressing the send button, the later output message MAY NOT reflect the result, that means even try catch catches the error, the output message still MAY display the previous message, which will misleads the user.

How to set custom HTTP header for single sign on

Currently we just begin to use an application called "etran". This application requires user name and password to login. Now, my assignment is to integrate etran application in our internal application. This means that somewhere in our internal application, there is a link leads to the etran application.
It is going to be single sign on, that means that once user logs into our internal application, when he/she clicks on the etran link, no sign on to etran is needed.
I consult with the technical people in etran. they said that our internal application needs to send a "login request" to etran via SSL with the user's information encoded in base 64 format. etran captures the HTTP header containing user authentication and authorization information, and parses the required information from the HTTP header.
My question is that how I set user information in HTTP header? From my understanding, once I am able to set the user information in HTTP header, it is in base 64 format?
Thanks in advance for your help.

sharon38_74 wrote:
they said that our internal application needs to send a "login request" to etran via SSL with the user's information encoded in base 64 format. etran captures the HTTP header containing user authentication and authorization information, and parses the required information from the HTTP header.
My question is that how I set user information in HTTP header? From my understanding, once I am able to set the user information in HTTP header, it is in base 64 format?Your application need to act like a proxy. You can invoke a HTTP request programmatically using java.net.URLConnection. You can set request headers using URLConnection#setRequestProperty(). Also see the API docs: [http://java.sun.com/javase/6/docs/api/java/net/URLConnection.html]. You only need to know the header field name where to set the Base64-encoded value in. You need to Base64-encode the value yourself.

Which OAM setting for passing values in HTTP header to application

Experts, what is the setting in OAM 11gR2 that is set to pass a userid pulled from a LDAP directory (which is already configured with OAM) as a HTTP Header to an application.
This is typically in cases where OAM is protecting or providing to protected resources on a Web Server or application.
Is this setting (in OAM) by default set to userid? I wanted to know exactly where and how to set this value in OAM Console settings.

In the protected resource policy and protected authorization policy in the responses tab set parameters to return headers for example if you want to return userid under name set header name like user_name, type header and the value as $user.userid. By default I guess OAM_REMOTE_USER is set in the http headers which contains the user id.

BC Ecommerce SOAP Error: Server did not recognize the value of HTTP Header SOAPAction

I am trying to add a product to an ecommerce site with this soap action: Product_UpdateInsert
I have followed this very brief instruction: https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx?op=Product_UpdateInsert
I have a html page in a secure area with a jQuery ajax soap script.
I get the this error when I run the script:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>Server did not recognize the value of HTTP Header SOAPAction: https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice/Product_UpdateInsert.</faultstring><detail /></soap:Fault></soap:Body></soap:Envelope>
I have also tried to add a header with the Soap action with the beforeSend in the ajax call.
This must have been solved before I suppose?
Here is my script:
<!DOCTYPE html>
<html lang="en">
<head>
<title>Test SOAP Request</title>
    <script type="text/javascript" src="//code.jquery.com/jquery-1.10.2.min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/jquery-cookie/1.3.1/jquery.cookie.min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/underscore.js/1.5.1/underscore-min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/backbone.js/1.0.0/backbone-min.js"></script>
    <script type="text/javascript" src="//cdn.worldsecuresystems.com/bcapi/bcapi-0.0.1.min.js"></script>
</head>
<body>
<script>
var wsUrl = "https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx";
var soapRequest =
'<?xml version="1.0" encoding="utf-8"?> \
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"> \
<soap12:Body> \
    <Product_UpdateInsert xmlns="https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice"> \
      <username>myEmailAdress</username> \
      <password>mySecretPassw</password> \
      <siteId>1894001</siteId> \
      <productList> \
        <Products> \
          <productCode>ZJAWEyuuyN</productCode> \
          <productName>My test product</productName> \
          <description>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.</description> \
          <smallImage>/images/product1/small.jpg</smallImage> \
          <largeImage>/images/product1/large.jpg</largeImage> \
         <cataloguesArray> \
             <string>/Store/</string> \
          </cataloguesArray> \
          <pricesSaleArray> \
            <string>US/19.95,3/17.96,7/16.96</string> \
          </pricesSaleArray> \
          <pricesRetailArray> \
            <string>US/20,5/19,8/20</string> \
          </pricesRetailArray> \
          <pricesWholesaleArray> \
            <string>US/20,5/19,8/20</string> \
          </pricesWholesaleArray> \
          <wholesaleTaxCodeArray> \
            <string>US/0.00</string> \
          </wholesaleTaxCodeArray> \
          <taxCodeArray> \
            <string>GB/VAT</string> \
          </taxCodeArray> \
          <groupProducts> \
            <string>580H0036BL</string> \
            <string>ACAI60</string> \
            <string>ABC-123</string> \
          </groupProducts> \
          <groupProductsDescriptions> \
            <string>Lorem ipsum dolor sit amet</string> \
            <string>consectetur adipisicing elit</string> \
          </groupProductsDescriptions> \
          <supplierEntityId>1234</supplierEntityId> \
          <supplierCommission>0</supplierCommission> \
          <weight>30</weight> \
          <tags>NEW!</tags> \
          <unitType>string</unitType> \
          <minUnits>0</minUnits> \
          <maxUnits>2</maxUnits> \
          <inStock>43</inStock> \
          <onOrder>3</onOrder> \
          <reOrder>2</reOrder> \
          <inventoryControl>true</inventoryControl> \
          <canPreOrder>true</canPreOrder> \
          <custom1>Text in custom field 1</custom1> \
          <custom2>Text in custom field 2</custom2> \
          <custom3>Text in custom field 3</custom3> \
          <custom4>Text in custom field 4</custom4> \
          <popletImages>/images/image1.jpg;/images/image2.jpg;</popletImages> \
          <enabled>true</enabled> \
          <deleted>false</deleted> \
          <captureDetails>true</captureDetails> \
          <downloadLimitCount>20</downloadLimitCount> \
          <limitDownloadsToIP>0</limitDownloadsToIP> \
          <isOnSale>true</isOnSale> \
          <hideIfNoStock>true</hideIfNoStock> \
          <productAttributes>Size*|5|Y:L||UK/2|US/20,S||UK/1|US/10</productAttributes> \
          <isGiftVoucher>false</isGiftVoucher> \
          <enableDropShipping>true</enableDropShipping> \
          <productWeight>0</productWeight> \
          <productWidth>0</productWidth> \
          <productHeight>0</productHeight> \
          <productDepth>0</productDepth> \
          <excludeFromSearch>false</excludeFromSearch> \
          <productTitle>My product title</productTitle> \
          <cycletypeId>3</cycletypeId> \
          <cycletypeCount>-1</cycletypeCount> \
          <slug>my-product</slug> \
          <hasVariations>true</hasVariations> \
          <variations> \
            <ProductVariation xsi:nil="true" /> \
            <ProductVariation xsi:nil="true" /> \
          </variations> \
        </Products> \
      </productList> \
    </Product_UpdateInsert> \
</soap12:Body> \
</soap12:Envelope>';
$.ajax({
     type: "POST",
     beforeSend: function(xhr){xhr.setRequestHeader('SOAPAction', 'https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice/Product_UpdateInsert');},
     url: wsUrl,
     contentType: "text/xml",
     dataType: "xml",
     data: soapRequest,
     success: processSuccess,
     error: processError
function processSuccess(data, status, req)
   if (status == "success")
   alert("Success!");
function processError(data, status, req)
   alert("Failed!");
   alert(req.responseText + " " + status);
</script>
</body>
</html>

This line is a target namespace so it should not be changed: <Product_Retrieve xmlns="http://tempuri.org/CatalystDeveloperService/CatalystEcommerceWebservice"> It is very easy to think that it's a placeholder and that it should be replaced with your own url, which it should not and which will fail.
This works now:
<!DOCTYPE html>
<html lang="en">
    <head>
        <title>Test 7 SOAP Request</title>
        <script type="text/javascript" src="//code.jquery.com/jquery-1.10.2.min.js"></script>
    </head>
    <body>
        <script>
            var SoapMessage = '<?xml version="1.0" encoding="utf-8"?> \
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"> \
<soap12:Body> \
<Product_Retrieve xmlns="http://tempuri.org/CatalystDeveloperService/CatalystEcommerceWebservice"> \
<username>Your Email</username> \
<password>Your password</password> \
<siteId>1894001</siteId> \
<productCode>HHKDKXS5MB</productCode> \
            </Product_Retrieve> \
            </soap12:Body> \
            </soap12:Envelope>';
            var url = "https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx";
            $.support.cors = true;
            $.ajax({
                type: "POST",
                url: url,
                data: SoapMessage,
                dataType: "xml",
                processData: true,
                contentType: "text/xml; charset=\"utf-8\"",
                success: function (msg) {
                    alert("suc: " + msg);
                error: function (msg) {
                    alert("Failed: " + msg);
        </script>
    </body>
</html>

Server did not recognize the value of HTTP Header SOAPAction: .

hello friends,
I am wrote a WebService client as below
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
public class AtmuClient
public static void main(String [] args) {
try {
String req="request";
String endpoint ="http://10.1.3.104/mims/service.asmx?WSDL";
String nameSpaceUri = "http://www.cum.com/MIMS";
Service service = new Service();
Call call = (Call) service.createCall();
call.setTargetEndpointAddress( new java.net.URL(endpoint) );
call.setOperationName(new QName(nameSpaceUri, "echoString") );
String ret = (String) call.invoke( new Object[] { req } );
System.out.println("Sent 'Hello!', got '" + ret + "'");
} catch (Exception e) {
System.err.println(e.toString());
the out put I am getting is
Server did not recognize the value of HTTP Header SOAPAction: .
what still I need to incorporate to my code. Do i need to add any methods still ? and one more thing is do i need to write WSDD for this? how ?. can any bady guide me
thanQ for any greatful guidance.
HAN.

Try setting an empty header object for the Call
SOAPContext ctx = new SOAPContext();
Header header = new Header();
Call call = new Call("", "", params, header, "", ctx); Regards
Byju Joy

OAM 10.1.4.3 HTTP Header authentication. Any documentation?

Thanks in advance,
I've located a document that outlines how to achieve this in a 10.1.3.x environment here:
http://download.oracle.com/docs/cd/B31017_01/web.1013/b28957/coreid.htm
under the "Web Application Using HTTP Header Variables through Oracle Access Manager" heading.
I have two questions:
1. Is there any updated documentation for 10.1.4.x as there are different.
2. I'm using the oracle HTTP server as a reverse proxy and have my webgate installed there. The instructions assume you are using OC4J and ask you to make modification to files that do not exist in an OHS scenario. How can I configure my HTTP server to pass through the headers to the access server for authentication?
Damion

Did you figure this out, Damion? We're facing a similar issue and I can't find any documentation anywhere...

OIF11g - Help on sending user attributes in HTTP header

Hello, I have a OIF11g setup configured for both IdP and SP. Upon successfull authentication against LDAP, I need to end some user attributes on the HTTP header to the SP application. I do no have OAM in my setup, so there is no option of Webgate or Policy Manager to do that. As far as I read the config doc, I'm in the impression that we need to write a custom authentication engine to accept user credentials and code to authenticate against LDAP and also add attributes to the response header.
Before I go down that path, just wanted to confirm if anybody has done this with OIF?
Thanks,
Sunil.

Bernhard:
Actually the headers are not set to null. I have an intermediate index.jsp page which is the first page that is redirected to by the AM - it is this page which calls my LoginServlet.
The value appears consistently on this index.jsp page but after it is forwarded to the LoginServlet it starts behaving inconsistently. I check the system.out log in my websphere /logs folder and that tells me that LoginServlet does not consistenly get these values from the header.
The wierd part is that if I use cookies or attributes, it works perfectly - each time every time. However, only in the case of headers (which is the method i am required to do) it behaves inconsistently.
ANY feedback/help on this would be really appreciated bern.. thanks..
~saahil

HTTP response contains status code 404 ...

Hello,
My system sceanrio is:
R/3 -> idoc -> XI-1 -> xi adapter -> XI-2 -> idoc -> R/3.
When the message sent, I get a red flag in SXMB_MONI transaction of "XI-1" system :
'HTTP response contains status code 404 with the
description Not Found'
Here is the SOAP adapter of the Call Adapter:
=============================================
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b> 404 &nbsp Not Found</b></font></td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/6.40 </b></font></td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <br><br><br><br><br><br> <p><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b> The requested resource does not exist.</b></font></p> <p><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><table><tr><td valign="top"><b> Details:</b></td><td valign="top"><PRE>Go to <A HREF="/" target="_parent">main page</A> of this application!</PRE></font></td></tr></table></font></p> </body> </html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 404 with the description Not Found XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2005-04-12T06:52:37Z" wasRead="false">
<SAP:Engine type="IS">is.50.weaver</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">IDoc</SAP:Adapter>
<SAP:MessageId>550806B7-DEED-FF42-96B1-6F33852373F1</SAP:MessageId>
<SAP:Info>MATMAS.0000000000214059:20050412085231</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2005-04-12T06:52:37Z" wasRead="false">
<SAP:Engine type="IS">is.50.weaver</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>550806B7-DEED-FF42-96B1-6F33852373F1</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
</SAP:HopList>
- <SAP:IDocInbound xmlns:SAP="http://sap.com/xi/XI/Message/30">
<SAP:TABNAM>EDI_DC40</SAP:TABNAM>
<SAP:MANDT>200</SAP:MANDT>
<SAP:DOCREL>46C</SAP:DOCREL>
<SAP:DOCNUM>0000000000214059</SAP:DOCNUM>
<SAP:DIRECT>1</SAP:DIRECT>
<SAP:IDOCTYP>MATMAS04</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>MATMAS</SAP:MESTYP>
<SAP:MESCOD />
<SAP:MESFCT />
<SAP:SNDPOR>SAPDEV</SAP:SNDPOR>
<SAP:SNDPRN>LOGDEV200</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:SNDPFC />
<SAP:RCVPOR>XI-TEST</SAP:RCVPOR>
<SAP:RCVPRN>LOGXID700</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
<SAP:RCVPFC />
<SAP:TEST />
<SAP:SERIAL>20050412085231</SAP:SERIAL>
<SAP:EXPRSS />
<SAP:STD />
<SAP:STDVRS />
<SAP:STATUS>30</SAP:STATUS>
<SAP:OUTMOD>2</SAP:OUTMOD>
<SAP:SNDSAD />
<SAP:SNDLAD />
<SAP:RCVSAD />
<SAP:RCVLAD />
<SAP:STDMES />
<SAP:REFINT />
<SAP:REFGRP />
<SAP:REFMES />
<SAP:CREDAT>2005-04-12</SAP:CREDAT>
<SAP:CRETIM>08:52:31</SAP:CRETIM>
<SAP:ARCKEY />
</SAP:IDocInbound>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20050412</SAP:Date>
<SAP:Time>085237</SAP:Time>
<SAP:Host>weaver</SAP:Host>
<SAP:SystemId>XID</SAP:SystemId>
<SAP:SystemNr>50</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>MSSQL</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>014</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>ANNA</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>002</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId>
<SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
<SAP:QIdInternal>XBTO3___0000</SAP:QIdInternal>
<SAP:CommitActor>A</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="700">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID">DF010AB7129C425B7035011D</SAP:EOReferenceRuntime>
<SAP:EOReferenceInbound type="TID">DF013D07020C425B70300B0A</SAP:EOReferenceInbound>
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>16517</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>0</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>16517</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>16527</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>IDOC</SAP:AdapterInbound>
<SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
<SAP:RandomNumber>71</SAP:RandomNumber>
<SAP:AckStatus>071</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="weaver">20050412065237.471</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="weaver">20050412065237.471</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="weaver">20050412065237.471</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="weaver">20050412065237.642</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="weaver">20050412065237.642</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="weaver">20050412065237.658</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="weaver">20050412065237.658</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="weaver">20050412065237.658</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="weaver">20050412065237.658</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="weaver">20050412065237.674</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="begin" host="weaver">20050412065237.674</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
<SAP:Timestamp type="end" host="weaver">20050412065237.814</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="weaver">20050412065237.814</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="end" host="weaver">20050412065237.939</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="begin" host="weaver">20050412065237.939</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="end" host="weaver">20050412065237.971</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="begin" host="weaver">20050412065237.971</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:OutboundBinding xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
- <SAP:OutboundBindingEntry version="30">
<SAP:OutboundBindingObjectId>B0E25658819A3AE888B48BAD55537C5E</SAP:OutboundBindingObjectId>
<SAP:FromPartyName />
<SAP:FromServiceName>DEV</SAP:FromServiceName>
<SAP:ToPartyName />
<SAP:ToServiceName>XIT</SAP:ToServiceName>
<SAP:ToInterfaceName>MATMAS.MATMAS04</SAP:ToInterfaceName>
<SAP:ToInterfaceNamespace>urn:sap-com:document:sap:idoc:messages</SAP:ToInterfaceNamespace>
- <SAP:OutboundBindingAttributes>
<SAP:AdapterTypeData xmlns:SAP="http://sap.com/xi/XI/Message/30" />
</SAP:OutboundBindingAttributes>
- <SAP:HeaderMapping>
<SAP:FieldMapping xmlns:SAP="http://sap.com/xi/XI/Message/30" />
</SAP:HeaderMapping>
- <SAP:ChannelEntry version="30">
<SAP:PartyName xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:ServiceName xmlns:SAP="http://sap.com/xi/XI/Message/30">XIT</SAP:ServiceName>
<SAP:ChannelName xmlns:SAP="http://sap.com/xi/XI/Message/30">GeneratedReceiverChannel_XI</SAP:ChannelName>
<SAP:AdapterName xmlns:SAP="http://sap.com/xi/XI/Message/30">XI</SAP:AdapterName>
<SAP:AdapterNamespace xmlns:SAP="http://sap.com/xi/XI/Message/30">http://sap.com/xi/XI/System</SAP:AdapterNamespace>
<SAP:AdapterSWCV xmlns:SAP="http://sap.com/xi/XI/Message/30">3B787A8035C111D6BBE0EFE50A1145A5</SAP:AdapterSWCV>
<SAP:AdapterEngineType xmlns:SAP="http://sap.com/xi/XI/Message/30">IS</SAP:AdapterEngineType>
<SAP:AdapterEngineName xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:MessageProtocol xmlns:SAP="http://sap.com/xi/XI/Message/30">XI</SAP:MessageProtocol>
<SAP:MessageProtocolVersion xmlns:SAP="http://sap.com/xi/XI/Message/30">3.0</SAP:MessageProtocolVersion>
<SAP:TransportProtocol xmlns:SAP="http://sap.com/xi/XI/Message/30">HTTP</SAP:TransportProtocol>
<SAP:TransportProtocolVersion xmlns:SAP="http://sap.com/xi/XI/Message/30">1.0</SAP:TransportProtocolVersion>
<SAP:ChannelDirection xmlns:SAP="http://sap.com/xi/XI/Message/30">O</SAP:ChannelDirection>
<SAP:FromPartyAgency xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:FromPartySchema xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:ToPartySchema xmlns:SAP="http://sap.com/xi/XI/Message/30" />
<SAP:ToPartyAgency xmlns:SAP="http://sap.com/xi/XI/Message/30" />
- <SAP:ChannelAttributes xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:AdapterTypeData xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:Attribute>
<SAP:Name>addressingMode</SAP:Name>
<SAP:Value>url</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>authenticationModeBasicAnon</SAP:Name>
<SAP:Value>anonymous</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>host</SAP:Name>
<SAP:Value>victor</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>httpDestination</SAP:Name>
<SAP:Value />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>isMessageSecurity</SAP:Name>
<SAP:Value>0</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>logonClient</SAP:Name>
<SAP:Value />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>logonLanguage</SAP:Name>
<SAP:Value />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>logonPassword</SAP:Name>
<SAP:Value isPassword="true" encryption="hw">AQ==</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>logonUser</SAP:Name>
<SAP:Value />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>passHopList</SAP:Name>
<SAP:Value>1</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>path</SAP:Name>
<SAP:Value>/sap/xi/engine?type=entry</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>port</SAP:Name>
<SAP:Value>56000</SAP:Value>
</SAP:Attribute>
</SAP:AdapterTypeData>
</SAP:ChannelAttributes>
</SAP:ChannelEntry>
</SAP:OutboundBindingEntry>
</SAP:OutboundBinding>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPDEV</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XID</Trace>
<Trace level="1" type="T">client = 700</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = ANNA</Trace>
<Trace level="1" type="Timestamp">2005-04-12T06:52:37Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 550806B7DEEDFF4296B16F33852373F1</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0010</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0010</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XID</Trace>
<Trace level="1" type="T">client = 700</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = ANNA</Trace>
<Trace level="1" type="Timestamp">2005-04-12T06:52:37Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO3___0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XID</Trace>
<Trace level="1" type="T">client = 700</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = ANNA</Trace>
<Trace level="1" type="Timestamp">2005-04-12T06:52:37Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">Interface Mapping urn:XI_to_XI_Simulation MATMAS04_MATMAS04</Trace>
<Trace level="1" type="T">*** APPLICATION TRACE TRUNCATED (for more details see LogViewer)***</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="1" type="T">processing the outbound binding</Trace>
<Trace level="1" type="T">search outbound bindings</Trace>
<Trace level="1" type="T">outbound bindings found</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_CALL_ADAPTER" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="T">Sender: Header mapped to</Trace>
<Trace level="1" type="T">Party =</Trace>
<Trace level="1" type="T">Agency =</Trace>
<Trace level="1" type="T">Scheme =</Trace>
<Trace level="1" type="T">Service = DEV</Trace>
<Trace level="1" type="T">Receiver: Header mapped to</Trace>
<Trace level="1" type="T">Party =</Trace>
<Trace level="1" type="T">Agency =</Trace>
<Trace level="1" type="T">Scheme =</Trace>
<Trace level="1" type="T">Service = XIT</Trace>
<Trace level="1" type="T">Party denormalization: sender</Trace>
<Trace level="1" type="T">Sender target scheme =</Trace>
<Trace level="1" type="T">Sender target agency =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Party denormalization: receiver</Trace>
<Trace level="1" type="T">Receiver target scheme =</Trace>
<Trace level="1" type="T">Receiver target agency =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="1" type="System_Error">HTTP-client: error response= <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active

Hi,
The 'Communication Channel' in Integration Builder was not configured right in the 'Service Number' field. There was a J2EE port instead of HTTP port.
J2EE port: 5<instance number>00
HTTP port: 80<instance number>
Good luck to everyone,
Dimitry

How to send a signed SOAP message with additional HTTP Header fields

Our Partner's integration requirements are that we send them asynchronous SOAP messages, that are digitally signed, and whose HTTP headers contains 5 or 6 additional header fields, of which 3 or 4 will need to be dynamically set during the message mapping. I believe we can use the HTTP adapter for adding new fields to the HTTP header, but don't believe it supports signing. I believe that the SOAP adapter supports signing, but I'm not clear on how to use it to add fields to the HTTP header. What is the most straight-forward way to achieve both the signing of the message and the addition of the HTTP header values?
Thanks,
Kurt

>>>What is the most straight-forward way to achieve both the signing of the message and the addition of the HTTP header values?
Use Java mapping for both.
1) Signing the message
You can digitally sign the soap message using many standard api like WSS4j? or refer Java XML signature API which comes in Jdk1.6.
Refer these links
WSS4J - http://ws.apache.org/wss4j/axis.html
Java XML signature : http://java.sun.com/developer/technicalArticles/xml/dig_signature_api/
2) >>whose HTTP headers contains 5 or 6 additional header fields, of which 3 or 4 will need to be dynamically set during the message mapping
Use Dynamic configuration API to set the additional header fields during message mapping.

How to change the dynamically LOV value to old value if it errors out

We have an use case like when a value is selected from LOV, some validations(EO validations) occur on that and if the validation fails we are throwing exception.But the new value is appearing in LOV text box. We need to display the old value in the LOV if the validation fails. Can you please let me know if there is any way to do that?

After thinking about this, I wondered if I had mis-read the use-case....so I added #2
Please state your Jdeveloper version, and elaborate on your use-case:
*1. Are you saying that the LOV contains incorrect values that the user has chosen?*
If so you should restrict the LOV values to what is acceptable for the row (based on what other values are in the row)
By restricting the values in the LOV the wrong value can no longer be selected, you would not need to build in functionality to revert back to previous values.
I woud start by creating a view criteria for the view object the LOV is based on. The form values would send the binding variables to the view criteria, and that would then execute the query (invoking the view criteriea). The LOV would then contain some information on only acceptable values.
You may be able to adapt some of the ideas presented in this video (on cascading list boxes) to make your LOV work properly. http://youtu.be/WTevRnXq04o
This video shows some ways to manipulate view criteria: http://youtu.be/dX93fiBCxEg
*2. Are you saying that the user has selected other fields in the form -- validation on those fields fails, and you want to revert back, but the LOV still contains the values selected?*
In that case, you need to clear the values in the form and re-execute the view object -- and refreshing to the correct value.
Stuart
Edited by: Stuart Fleming on Sep 12, 2012 12:04 PM
Edited by: Stuart Fleming on Sep 12, 2012 6:52 PM
Edited by: Stuart Fleming on Sep 12, 2012 6:52 PM

Errors with Resource Adapter with data source as "http header"

hi Team,
The objective was to create a ResourceAdapter that will get accountid from http-header and automatically log me in. More like Siteminder, Tivoli Access Mgr.
In the adapter's "prototype.xml", I added this line.
"<AuthnProperty name='sauid' displayName='UserID in From Browser' formFieldType='text' isId='true' dataSource='http header'/>
I enable pass-through authn for "user-interface" app.
My test passes, when I login to "/idm/user". I am not prompted for uid/pwd instead I am
transparently logged and presented with self-service page, aka single-sign-on. so far so good.
But, I have an issue when when I login to /idm (not /idm/user) as configurator and then try to create a new user.....I donot see the set password fields in modify.jsp. This issue is only apparent if I set enable pass-through for user-interface. If I reset the user interface to default, which is userid/pwd, then I do see set-password-fields in modify.jsp.
Any leads on why this could be happening?

Hi Asam,
If we want to create a parameter depend on another dataset, we can additional create or add the dataset, embedded or shared, that has a query that contains query variables. Then use the option that “Get values from a
query” to get available values. For more details, please see:http://msdn.microsoft.com/en-us/library/dd283107.aspx
http://msdn.microsoft.com/en-us/library/dd220464.aspx
As to the Report Builder features, we can refer to the following articles:http://technet.microsoft.com/en-us/library/hh213578.aspx
http://technet.microsoft.com/en-us/library/hh965699.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

OAM- http header containing old value

Similar Messages

Maybe you are looking for