OAS9i - Forms Server 6i Display

Hi,
I'm using oas9i with forms server 6i
my NLS_LANG is ARABIC_EGYPT.AR*MSWIN1256
In my application I have a toolbar on the left for all forms Now it is comming on the right,How can I keep it comming from the left.
Thankyou
Ashraf

Dear Sir,
The answer to your question is
Set the DIRECTION property of the WINDOW to Left_to_Right. The toolbar's direction is always inherited from its WINDOW's direction.
When the DIRECTION property of the WINDOW is set to DEFAULT, the toolbar's direction is inherited from the FORM's direction. If the FORM's direction is also DEFAULT, then the toolbar's direction is inherited from NLS_LANG.
null

Similar Messages

LifeCycle Form Server :- My form is rendering as pdf in the browser without displaying data sometim

LifeCycle Form Server :- My form is rendering as pdf in the browser without displaying data sometimes within data fields, and at other times it will display data. The form consistently displays data when rendered in HTML.
We display the forms in a browser either HTML or PDF format based on the user selection. But the behavior of PDF format is not consistent. Sometimes it renders properly and sometimes the form renders without data.
Dose any one experienced this issue?
Any help would be greatly appreciated.
Thanks in advance,
RK

I have been seeing the same issue, but haven't been able to find a fix for it yet. So any info would be appreciated here too.
Thanks

Dev 6.0 forms server and 8i

One server with NT 4.0 SP5 running Oracle 8i (8.1.5.0.5) and Dev 6.0 (6.0.5.32) installed in seperate oracle homes. I configured tnsnames correctly and created a very simple form that connects to the DB and displayes two fields. Form runs fine in client/server form runtime mode. Setup a client with IE5 microsoft VM (5.0.0.3240) and security configured so I can run the javasoft examples. I started the Forms server as a service running as a domain admin. When I try to run the form using static (not a cartridge) config it connects to my static.htm file and downloads some java stuff and then says applet initialized and displayes the blue logo for Oracle Developer Server and then stops, no form??? So my first question is: this config is supported right? Then what am I doing wrong? I initially installed Dev. 6.0 using the wrong installer (the one on the distribution), but then installed again (ontop of current config, I couldn'e un-install) and patched it to 6.0.5.32 and as I said the forms run in Client/Server mode fine. How do I debug the forms server??? I don't get any error messages.

I got it!
After reading numerous postings I discovered that I needed to unzip the class.zip files and store them in the java directory, but thanks anyway.

FRM-92101 There was a failure in the forms server during startup

Hi guys when running EBS i am getting this error:
it happens when i try to load any form i.e hrms managemnet --> work structure -> organization
error : FRM-92101 There was a failure in the forms server during startup
this could happen due to invalid configuration
please look into webserver log file for detail
following are the formsweb.cfg file details:
-------------------------------------------------------------------------------start----------------------------------------
[oratest@kapp server]$ vi formsweb.cfg
[oratest@kapp server]$ tail -1000 formsweb.cfg
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=/mnt/extdrive/VIS/apps/tech_st/10.1.2/
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=orac
------------------------------------------------------end----------------------------------------------
plz help
regards,
kashif

Hi Hussein,
i got the error in application log that libXm.so.2 is missing, then i installed openmotif to resolve it, but after that form window is not opening.
and application log is as follows:
10/10/22 18:41:45.258 10.1.3.0.0 Started
10/10/22 18:41:46.981 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/22 18:41:46.993 formsweb: 10.1.3.0.0 Started
10/10/22 18:44:38.873 formsweb: ListenerServlet init()
10/10/22 18:44:40.204 formsweb: Forms session <1> failed during startup: no response from runtime process
10/10/22 18:44:40.206 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms session <1> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
10/10/23 14:57:11.795 10.1.3.0.0 Started
10/10/23 14:57:22.415 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 14:57:22.641 formsweb: 10.1.3.0.0 Started
10/10/23 15:01:33.111 formsweb: 10.1.3.0.0 Stopped
10/10/23 15:05:56.542 10.1.3.0.0 Started
10/10/23 15:05:58.541 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 15:05:58.652 formsweb: 10.1.3.0.0 Started
10/10/23 15:15:29.23 formsweb: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:306)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
10/10/23 15:32:28.558 formsweb: 10.1.3.0.0 Stopped
10/10/23 15:33:44.992 10.1.3.0.0 Started
10/10/23 15:33:46.570 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 15:33:46.610 formsweb: 10.1.3.0.0 Started
regards,
kashif

Forms Server Install on Redhat Linux 7.0

I am attempting to install Forms6i/Reports6i/Graphics6i on my Linux Box.
I already have a 8.1.6 Database configured and running.
After downloading the tar file and extracting it I am having trouble with the installation of the software. The Guide refers to running the orainstal shell script in the orinstall directory. Well when I execute the script I get a Character Installer and I was expecting the Java based Gui Installer such as the one with Oracle 8i DB. I cannot get the oraviewer program to work either for I wanted to see if there were some other setting I am not executing correctly.
When I continue with the Char Installer it has trouble finding a lib called X11m.a or something (Motif related).
Does Forms 6i require Motif? If so where and how do I get it for my Linux box? Are there any work arounds for this.
Any help is greatly apprecicated.
Thanks

Hello Shawn,
Yes, you need motif libraries. You can obtain it for free from: http://www.metrolink.com/products/Motif/download.html
I installed both runtime and development packages.
Aditionally you may ned to have X-devel packages installed.
After struggling with Forms installation on my linux machine I managed to do this, but let me tell you that it's not so simple. First of all please excuse my bad English, I'm not a native speaker. Anyway that's how I did it.
I assume that you downloaded the file d2k6irelease2.tar from technet. This file includes Forms 6i rel. 2 Server and Developer.
I managed to install this on my RedHat 7.1 machine having already installed Oracle 8.1.7 database Server.
First of I created a separate user which owns Forms Server software. I set this user as belonging to the same group ("dba" in my case) as the oracle database software owner. (On my machine I have "oracle" user which owns databse server belonging to the "dba" group and "forms" user belonging also to the "dba" group). You must set your environment like this (in ".bash-profile" in my case):
-- Begin .bash_profile file
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
unset LANG
PATH=$PATH:$HOME/bin
BASH_ENV=$HOME/.bashrc
ORACLE_BASE=/oracle
ORACLE_HOME=$ORACLE_BASE/product/forms
ORACLE_SID=forms
ORACLE_AUTOREG=$ORACLE_HOME/guicommon/tk60/admin
TNS_ADMIN=$ORACLE_HOME/network/admin/tnsnames.ora
ORACLE_TERM=vt220
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
TWO_TASK=oratest
MMTK_AVIPLAYER="xanim %s &"
PATH=$PATH:$ORACLE_HOME/bin
DISPLAY=TEST_MACHINE:0.0
export ORACLE_BASE ORACLE_HOME LD_LIBRARY_PATH TWO_TASK MMTK_AVIPLAYER
export TNS_ADMIN DISPLAY ORACLE_AUTOREG ORACLE_TERM ORACLE_SID
export BASH_ENV PATH
unset USERNAME
-- End .bash_profile file
As you can see I set up ORACLE_BASE to the same ORACLE_BASE as database software ORACLE_BASE, a new ORACLE_HOME, a dummy ORACLE_SID, TWO_TASK to the sid of your 8.1.6 server instance, TNS_ADMIN pointing to a directory which I created manually before starting the installer (see below my "tnsnames.ora" file under this manually created directory), ORACLE_AUTOREG, ORACLE_TERM, DISPLAY set to your_hostname:0.0, LD_LIBRARY_PATH as seen, MMTK_AVIPLAYER is for playing ".avi' files (I didn't tried this). You may need to "chmod 775" on your $ORACLE_HOME directory from the database user account.
-- Begin "tnsnames.ora" file
ORATEST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = TEST_MACHINE)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oratest)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
-- End "tnsnames.ora" file
I untared d2k6irelease2.tar under a subdirectory created under "forms" home directory. In "unixdoc/Server" directory you will find linux_svr.pdf instructions for installation of Forms server and under "unixdoc/Developer" you will find linux_dev.pdf instructions for Developer Server. "oraview" didn't worked for me either. GUI installer didn't worked for me either. Chnaging to orainst you may issue ./orainst command and start the installation in character mode (I did not even started an X session). I choosed default install, do not create database objects (I think you will be able to install later this objects by running some sql scripts, I didn't). And I choosed all components presented and all options and default port parameters. You will also be prompted to confirm locations of the motif libraries. I choosed http mode for forms server. Do not install Reports security feature (I've heard that it's not working, this option will be presented to you somewhere at the end of installation). After finishing you may need to edit "forms60_server" file and some other files. For example I had to change my "host_name.domain_name" (in my case was "TEST_MACHINE.(none)") to my IP address as I don't have a DNS server here.
That's what I did to test forms server:
I wanted to test my Forms server by running Apache web server (the one that is installed by default by linux). (in the documetation you will find references to the WebDB listener which as far as I know is no longer installed in release 2, so the documentation is obsolete regarding this module). For this you will have to edit /etc/httpd/conf/httpd.conf file. Look for the section "Alias" and "AliasScript". under your forms $ORACLE_HOME/orainst you will find two files "forms6iconfig.txt" and "reports6iconfig.txt". You will find there actions to be performed by you manually. in "forms6iconfig.txt" file you will find virtual mappings for physical directories. You have to put this entries in "httpd.conf" file. You must edit this file as "root". For example 'Alias /dev60temp/ "/oracle/product/forms/tools/web60/temp/"'. The exception I made was for "/dev60cgi" virtaul mapping which I've put under ScriptAlias section 'ScriptAlias /dev60cgi/ "/oracle/product/forms/tools/web60/cgi/"'.
After succesfully editing the file you will ned to restart http server:
#/etc/rc.d/init.d/httpd restart
Login again as "forms" user.
In $ORACLE_HOME directory isuue:
$./forms60_server start
This will start your forms server listener.
After that you can test your forms server running from an external machine by entering: http://ip_addres_of_linux_machine/dev60html/runform.htm
and after completing parameters you will see "text.fmx" form applet saying that Forms server is installed corectlly or directly: http://ip_addres_of_linux_machine/dev60cgi/f60cgi
You have to install Jinitiator to view the applet. It will be prompted for you to download it when accessing the above address.
To be honest I was disapointed to see that forms server is very slow. And I mean very slow.
In the end please let me excuse if I wasn't clear in some points. If you have any questions please post them on the list. I'm not an expert and I may have made mistakes, but in the same time I hope this will help you setting up forms server on your linux box.
I forgot to mention that you will probably see a message saying that "formsweb.cfg was not found" when accesing "http://..../f60cgi". If you see this you have to options: either make a symlink "forms60" in the root directory to $ORACLE_HOME/forms60 directory or add a line in your "httpd.conf" file (I put this lines the last ones):
#Include 6iserver configuration file for setting formsweb.cfg path
include "/developer_home/conf/6iserver.conf"
And in $ORACLE_HOME create a directory named "conf". In this directory create a file named "6iserver.conf" and put the following line in it:
SetEnv FORMS60_WEB_CONFIG_FILE /developer_home/forms60/server/formsweb.cfg
This will set your environment correctly and you will be able to see the test form. Don't forget to restart apache web server and forms listener.
Kindly,
Codrut Octavian Popescu

Problem while compiling 'dll' files in Form Server..Urgent

Hi!
I'm trying to compile the library(dll) in form server and getting a message that "can not open that file".At the same time able to compile 'fmb' files which is in the same directory.
Could you please help me?
Thank you,
Denish

I am also working on Forte. Forte has an inbuilt Tomcat. You dont need to copy any files to any where in the file mount system. You need to specify the External / Internal Browser settings, So that when you try to execute it, the .jsp file can be displayed in the browser. I havent faced any problem as you said.
Uma
http://www.javagalaxy.com

New on forms server 6i : need help

Hi,
I have installed a web sever that have to use Form Server Listener to read .fmx file on the website.
When I launch my web page, all the classes are founded and imported, IExplorer indicate applet initialized, But I have no picture from the applet... the form where the applet have to be executed is a white page and the server isn't displaying any error.
- My web server is correctly configured (I've tried with OAS and IIS)
- The HTML pages are correct (website is running on an other server)
- Ifsrv60 and Ifweb60 are running
- My environement variables seems to be correct and my registry entries too.
- No problem with the database connection
I also got this error on Java Console
Following Exception occured: sun.applet.AppletSecurityException: checkconnect.networkhost3
sun.applet.AppletSecurityException: checkconnect.networkhost3
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.lang.RuntimeException.<init>(RuntimeException.java:50)
at java.lang.SecurityException.<init>(SecurityException.java:42)
at sun.applet.AppletSecurityException.<init>(AppletSecurityException.java:29)
at sun.applet.AppletSecurityException.<init>(AppletSecurityException.java:34)
at sun.applet.AppletSecurity.checkConnect(AppletSecurity.java:643)
at sun.applet.AppletSecurity.checkConnect(AppletSecurity.java:666)
at sun.applet.AppletSecurity.checkConnect(AppletSecurity.java:566)
at sun.plugin.ActivatorAppletContext.getImage(ActivatorAppletContext.java:65)
at java.applet.Applet.getImage(Applet.java:197)
at oracle.forms.engine.FormsImageLoader.loadFormsImage(Unknown Source)
at oracle.forms.engine.FormsImageLoader.getDefaultImage(Unknown Source)
at oracle.forms.engine.Main.getDefaultImage(Unknown Source)
at oracle.forms.engine.Main.getParamImage(Unknown Source)
at oracle.forms.engine.Main.getLogo(Unknown Source)
at oracle.forms.engine.Main.initDesktop(Compiled Code)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.JinitAppletPanel.run(Compiled Code)
at java.lang.Thread.run(Thread.java:466)
Does anyone Knows where the problem could come from. Any suggestion will be welcomed.
null

Hi,
it seems that you Java VM doesn't allow a connection to a server on you network.
You'd better try to configure your HTML file or CGI environment to use Oracle JInitiator.
Otherwise you need to use IE 5.0 and configure it's security so that it allows you to connect to the correct host.
HTH,
Michael

FRM-92101- There is a failure in the form server during startup.

Hi,
I'm deploying a forms 10g application . I'm using Oracle Application Server Forms and Reports Services 10.1.2.0.2 under Red Hat Enterprise Linux 5, along with an Oracle 10g Database on another server. Every time I try testing the form services using http://10.0.4.114:7778/forms/frmservlet it brings out the errorFRM-92101- There is a failure in the form server during startup. This could happen due to invalid configuration. Please look into the web server log file for detail
Right now, I'm a bit lost. Can anyone please tell me if there is some parameter I have to set, or something I should do to make it work?
Thanks a lot

Fabian,
I did not make changes to those files. The forms services are working on another server with Red hat Rel 4 and 3 . What I did is to configure a new server with Red Hat Rel 5 , took the backup of all the forms binaries and the HOME and restore on the new server. I did the same thing for a server running rel 4 and it has no issue:
The content of the files are as below:
DEFAULT.ENV*
# $Id: default.env 26-apr-2005.16:59:08 sujain Exp $
# default.env - default Forms environment file, Solaris version
# This file is used to set the Forms runtime environment parameters.
# If a parameter is not defined here, the value used will be that defined
# in the environment in which the servlet engine (OC4J or JServ) was started.
# NOTES
# 1/ The Forms installation process should replace all occurrences of
# <percent>FORMS_ORACLE_HOME<percent> with the correct ORACLE_HOME
# setting, and all occurrences of <percent>O_JDK_HOME<percent> with
# the location of the JDK (usually $ORACLE_HOME/jdk).
# Please make these changes manually if not.
# 2/ Some of the variables below may need to be changed to suite your needs.
# Please refer to the Forms documentation for details.
ORACLE_HOME=/u01/oracle10g_Forms
FORMS_PATH=/u/oracle/bank/gmx
REPORTS_PATH=/u/oracle/bank/fonts
#TWO_TASK=rac.world4
TWO_TASK=server.world
#TWO_TASK=server1.world
#TWO_TASK=s0999001.world4
#TWO_TASK=s0202001.world4
#TWO_TASK=server.world4
NLS_LANG=AMERICAN_AMERICA.AR8MSWIN1256
NLS_DATE_FORMAT=DDMMYYYY
# Search path for Forms applications (.fmx files, PL/SQL libraries)
# FORMS_PATH=/u01/oracle10g_Forms/forms
# webutil config file path
WEBUTIL_CONFIG=/u01/oracle10g_Forms/forms/server/webutil.cfg
# Disable/remove this variable if end-users need access to the query-where
# functionality which potentially allows them to enter arbitrary SQL
# statements when in enter-query mode.
FORMS_RESTRICT_ENTER_QUERY=TRUE
# Java class path
# This is required for the Forms debugger
# You can append your own Java code here)
# frmsrv.jar, repository.jar and ldapjclnt10.jar are required for
# the password expiry feature to work(#2213140).
CLASSPATH=/u01/oracle10g_Forms/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/oracle10g_Forms/jlib/repository.jar:/u01/oracle10g_Forms/jlib/ldapjclnt10.jar:/u01/oracle10g_Forms/jlib/debugger.jar:/u01/oracle10g_Forms/jlib/ewt3.jar:/u01/oracle10g_Forms/jlib/share.jar:/u01/oracle10g_Forms/jlib/utj.jar:/u01/oracle10g_Forms/jlib/zrclient.jar:/u01/oracle10g_Forms/reports/jlib/rwrun.jar:/u01/oracle10g_Forms/forms/java/frmwebutil.jar:/u01/oracle10g_Forms/forms/java/frmrwinteg.jar:/u01/oracle10g_Forms/forms/java/webutil.jar
# The PATH setting is not required for Forms if the Forms executables are
# in <ORACLE_HOME>/bin. However, it is required if Graphics applications
# are called from Forms applications.
PATH=/usr/bin:/sbin:/bin:/u01/oracle10g_Forms/bin
# Settings for Reports
# NOTE: This setting is only needed if Reports applications
# are called from Forms applications
# However, because of bug 2336698 where a report is started from
# a forms debugger session with an already running JVM, then
# the report's class path should also be included in the forms
# class path.
# We no longer need to set REPORTS_CLASSPATH as forms will
# always start the JVM before calling reports.
# Settings for Graphics
# NOTE: These settings are only needed if Graphics applications
# are called from Forms applications
# Please uncomment the following and put the correct 6i
# oracle_home value to use Graphics applications.
#ORACLE_GRAPHICS6I_HOME=<your Graphics 6i oracle_home here>
# Search path for Graphics applications
GRAPHICS60_PATH=
# Settings for Forms tracing and logging
# Note: This entry has to be uncommented to enable tracing and
# logging.
#FORMS_TRACE_PATH=<FORMS_ORACLE_HOME>/forms/server
# System settings
# You should not normally need to modify these settings
# Path for shared library objects
# This is highly platform (if not machine) specific ! At install time
# <percent>LD_LIBRARY_PATH<percent> should be replaced with the
# actual value of the LD_LIBRARY_PATH environment variable (at install
# time). That should ensure we have the paths for such necessities as
# the motif and X11 libraries.
# Explanations:
# - Reports needs the path for libjava.so
# (.../jre/lib/sparc)
# - Forms needs two paths to the jre, for libjvm.so and libhpi.so
# - In JDK 1.4.1 the location of libjvm.so is lib/sparc (there is no
# classic directory) so we do not include the .../classic directory
# below. There are other versions of libjvm.so (in directories server,
# client and hotspot) but we will use the version in lib/sparc for now.
LD_LIBRARY_PATH=/u01/oracle10g_Forms/lib:/u01/oracle10g_Forms/jdk/jre/lib/i386:/u01/oracle10g_Forms/jdk/jre/lib/i386/server:/u01/oracle10g_Forms/jdk/jre/lib/i386/native_threads:/u01/oracle10g_Forms/inventory/filemap/jre/1.4.2/lib/i386/client:/u01/oracle10g_Forms/inventory/filemap/jre/1.4.2/lib/i386:/usr/lib:/u01/oracle10g_Forms/jdk/jre/lib/i386/server:/u01/oracle10g_Forms/jdk/jre/lib/i386/native_threads:/u01/oracle10g_Forms/jdk/jre/lib/i386:/u01/oracle10g_Forms/jdk/jre/lib/i386:/usr/lib:/u01/oracle10g_Forms/lib:/u01/oracle10g_Forms/classes/lib:/u01/oracle10g_Forms/ifs1.1/lib:/u01/oracle10g_Forms/jis/lib
LD_ASSUME_KERNEL=2.4.19
FORMSWEB*
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
#form=test.fmx
form=B08SSS20.fmx
# Forms runtime argument: database connection details
userid=guiusr/guiusr
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=900
# Forms applet parameter
height=800
# Forms applet parameter
separateFrame=true
# Forms applet parameter
splashScreen=no
# Forms applet parameter
background=no
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=blue
# Forms applet parameter
logo=no
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar,timeout.jar,frmrwinteg.jar,webutil.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=30
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=/u01/oracle10g_Forms
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=true
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[ref]
#serverURL=/forms/lservlet/perf
serverURL=/forms/lservlet/
#otherparams=P_WST_LAN_IND=1 record=forms tracegroup=0-199
#envFile=default.env
[nat]
#serverURL=/forms/lservlet/perf
serverURL=/forms/lservlet/sessionperf
#envFile=defaultar.env
ERROR IN Java console is
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\akintayo.beckley.GTBANK
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
oracle.forms.net.ConnectionException: Forms session <1> failed during
startup: no response from runtime process
at
oracle.forms.net.ConnectionException.createConnectionException(Unknown
Source)
at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
at oracle.forms.net.HTTPNStream.flush(Unknown Source)
at java.io.DataOutputStream.flush(Unknown Source)
at oracle.forms.net.HTTPConnection.connect(Unknown Source)
at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
at oracle.forms.engine.Runform.initConnection(Unknown Source)
at oracle.forms.engine.Runform.startRunform(Unknown Source)
at oracle.forms.engine.Main.createRunform(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)

Fail to use Form Server Render Form QPAC

The opeation become stall in the Form Server Render Form QPAC, its exception is :com.adobe.formServer.interfaces.RenderFormException: XMLFormFactory, PAexecute failure: "(com.adobe.document.xmlform.ReturnStatus@b9e139) XMLForm, render : 12309, XFA template Model is empty."
BTW: is there document to describe each items's meaning and example values in this QPAC ? Thanks in advance.
Detail log is:
2007-07-05 13:52:12,984 INFO [com.adobe.formServer.FormServer] ALC-FRM-001-501: FormName:/Forms/attendance/attendanced_V1.2.4_final.xdp : FormPreference:PDFForm : Debug:false : PDFVersion:null : Content Root:xappstore://10.162.119.7 : Base URL:null : App Root:null : User Agent:null
2007-07-05 13:52:13,015 ERROR [com.adobe.document.XMLFormService] $$$/com/adobe/document/xmlform/msg.XFA=XMLForm, render : 12309, XFA template Model is empty.
2007-07-05 13:52:13,015 ERROR [com.adobe.formServer.PA.XMLFormAgentWrapper] ALC-FRM-001-017: mid,tid: 12309,3420.3492 sev: f text: XMLForm, render : 12309, XFA template Model is empty.
2007-07-05 13:52:13,015 ERROR [com.adobe.livecycle.formsservice.exception.FormServerException] ALC-FRM-001-013: XMLFormFactory, PAexecute failure: "(com.adobe.document.xmlform.ReturnStatus@b9e139) XMLForm, render : 12309, XFA template Model is empty."
2007-07-05 13:52:13,015 ERROR [com.adobe.formserver.wfplugin.RenderForm.RenderFormService] FSQP011: An unexpected exception occurred
com.adobe.formServer.interfaces.RenderFormException: XMLFormFactory, PAexecute failure: "(com.adobe.document.xmlform.ReturnStatus@b9e139) XMLForm, render : 12309, XFA template Model is empty."
at com.adobe.formServer.client.EJBClient.renderForm(EJBClient.java:356)
at com.adobe.formserver.wfplugin.RenderForm.RenderFormService.execute(Unknown Source)
at com.adobe.workflow.engine.PEUtil.executeAction(PEUtil.java:434)
at com.adobe.workflow.engine.ProcessEngineBMTBean.continueBranchAtAction(ProcessEngineBMTBea n.java:2924)
at com.adobe.workflow.engine.ProcessEngineBMTBean.asyncContinueBranchCommand(ProcessEngineBM TBean.java:2294)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.invocation.Invocation.performCall(Invocation.java:345)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionConta iner.java:214)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionI nterceptor.java:149)
at org.jboss.webservice.server.ServiceEndpointInterceptor.invoke(ServiceEndpointInterceptor. java:54)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:48)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:106)
at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext(AbstractTxInterceptorBMT.java:1 58)
at org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:62)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstance Interceptor.java:154)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:153)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:192)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:122)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:624)
at org.jboss.ejb.Container.invoke(Container.java:873)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:415)
at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:88)
at $Proxy206.asyncContinueBranchCommand(Unknown Source)
at com.adobe.workflow.engine.ProcessCommandControllerBean.doOnMessage(ProcessCommandControll erBean.java:133)
at com.adob

If you install the WorkFlow SDK, there is a document under Documentation that explains all the settings. This is a subset:
To add the Form Server Render Form component to your workflow:
1. Drag the Form Server Render Form component from the Components palette to your workflow.
2. Click the General tab. In the Name box, type a name to identify this component in your workflow.
3. (Optional) In the Description box, type the description of the component.
4. Click the Input tab. In the Form Query box, type the Uniform Resource Identifier (URI) component (no
protocol or schema) of the form to be rendered. This URI is appended to the Content Root URI value to
form an absolute reference to the form. For example, type:
Forms/myForm.xdp
Forms/myForm.pdf
5. (Optional) In the Form Preference box, type the output format of the form. The default value is AUTO.
For details about form preferences, see Selecting a form preference on page 11.
6. (Optional) In the Options box, type the rendering options, such as locale or character set. Use an &
(ampersand) to separate the options. For example, type:
{$ TaggedPDF=false&PDFVersion=1.6&CharSet=UTF-8 $}
For details about rendering options, see Selecting rendering options on page 12.
7. (Optional) In the User Agent box, type the user agent that identifies the application that will be used to
display the form. The default value is Mozilla/3.x. This property specifies the HTTP header
User-Agent that provides information about the target device. A target device is a client application,
such as a web browser. This value takes precedence over what may exist in environment variables.
You can retrieve this value from the JSP/ASP environment.
8. If you have an application server that will incorporate services from LiveCycle Forms, in the
Application Web Root box, type the servers root location. This root location is combined with the
Target URL to form an absolute URL to access application-specific web content.
9. (Optional) In the Input XML Data box, type the location of the XML file that contains the information to
use to prepopulate the form. This data will be merged with the form during rendering. For example,
type:
C:\input.xml
Alternatively, you can use a form variable to retrieve data from a previous step in your workflow. Form
variables are primarily used to store the data from the forms submitted to LiveCycle Workflow Server.
The data can then be accessed at run time. For example, type the following expression:
serialize(/process_data/formVar/form-data/data/*,false)
The serialize function takes the data from the form variable. In this example, the formVar process
variable represents the Form data type. The false parameter encodes the data in UTF-8 in the XML
code. You can optionally set this value to true if you do not want UTF-8 encoding. For more
information about the Form data type, how it works with Adobe LiveCycle Form Manager, and its use in
a workflow process, see the Configuring Human Interaction chapter in Creating Workflows.
10. (Optional) In the TargetURL box, type the URL of the target device that will receive the posts from this
form. The target URL is inserted into the transformed output invoked during a Submit operation. For
example, type:
http://servername:8080/fm/processFormServlet?action=0
11. In the Content Root URI box, type the URI of the AppStore to specify the absolute reference to a
physical repository from which the content (forms, images, or scripts) will be retrieved. For example,
type:
file:///c:/forms
xappstore://hostname
This value is combined with the Form Query value to form the absolute path to the form to be
rendered.
Note: The Content Root URI is often constant across many user applications and can be set
administratively to a persistent value.
12. If you are using relative paths (such as ../images/graphic.jpg), in the Base URL box, type a base
URL to identify the HTTP equivalent of the Content Root URI. This URL is required for transformations
that include HREF references to external dependencies such as images or scripts. When a dependency
path is absolute, this parameter is ignored; otherwise, the dependency path is combined with the Base
URL. For example, type:
http://hostname/forms
13. If required by the server on which LiveCycle Forms is installed, in the User Name box, type a user name,
and, in the Password box, type a password. If the password is encrypted, it must be Base64 encrypted.
For more information, see Encrypting passwords on page 6.
14. Click the Output tab. In the Output Document box, click the ellipsis button, and then select the
variable that will receive the new document. The data type for this variable must be document.
15. In the Page Count box, click the ellipsis button, and then select the variable that will receive the page
count. The data type for this variable must be integer.
16. In the Page Number box, click the ellipsis button, and then select the variable that will receive the
page number. The data type for this variable must be integer.
17. Click OK.
Jasmin

FRM-92101: failure in the Forms Server during startup.

Hi
I am calling a Oracle report from a Oracle forms application. When I enter the parameters on the Parameter Form (Oracle Forms Application created for
entering the User Parameters) and click 'Run Report' button, I am getting the following error:
Kindly help me on this. Thanks in advance.
The complete error discription is given here...
FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration.
Details...
Java Exception:
oracle.forms.net.ConnectionException: Forms session <3> aborted: unable to communicate with runtime process.
- at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
- at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
- at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
- at oracle.forms.net.HTTPNStream.flush(Unknown Source)
- at java.io.DataOutputStream.flush(Unknown Source)
- at oracle.forms.net.StreamMessageWritter.run(Unknown Source)
Environment in which my Forms and Report Applications is running:
Operating System     -     Windows XP Professional
Oracle9i Enterprise Edition Release 9.2.0.1.0 - 64bit Production With the Partitioning option
JServer Release 9.2.0.1.0 - Production
Forms [32 Bit] Version 10.1.2.0.2 (Production)
Report Builder 10.1.2.0.2
ORACLE Server Release 10.1.0.4.2
Please find the steps I followed before I run this application:
1. I started the OC4J Forms Server on my machine
2. I started the OracleAS Reports Services (Reports Server) on my machine.
3. Connected to the database and run the Forms Application.
I have tried the following options to solve this error:
- I have re-installed Oracle Enterprise Edition Release 9.2.0.1.0 again and retry calling my Reports application from Oracle Forms. Still the same error
persists.
I have written the following code inside 'WHEN-BUTTON-PRESSED' Trigger to call my Oracle Report:
I found that the above error is coming at the following highlighted line below:
declare
BEGIN
     --prepare the list of parameters to be sent to the report
     --Add parameter(s) to list just created
     --START THE REPORT
     v_repid := FIND_REPORT_OBJECT('REPORT197');
     vc_rep := RUN_REPORT_OBJECT(v_repid, Plist);
     --GET REPORT STATUS
     vc_rep_status := REPORT_OBJECT_STATUS(vc_rep);
     -- Wait until report finishes or produces an error
     -- Display the report if it is finished
END;

Hi ,
I think that this kind of problem persists because of the variety of Forms , Database and maybe OS number-bit versions(32-bit and 64 respectively).
In the past , due to the inequality of number-bit of OS and the Oracle Products , I had many problems.... the import was finished abnormally as the connection to the database was stopped ...
Regards,
Simon

Installing Forms Server on Windows 2000

We installed Forms Server 6i on Windows 2000. We completed the installation successfully. When we clicked on the 'Run the Form on the Web.', it gives 'This page cannot be displayed.' error. We tried this twice, but getting same error.
Any suggestions/help is greatly appreciated.
Thanks
VL.

Do you have your web server installed too?
forms server works in conjunction with your web server.
Make sure you have done the following...
Web server is listening on port 80
Forms server is running in HTTP mode. ( You may need to stop and restart the forms service in win2000 if you change this from socket in the registry )
You must also set up your virtual directorys on your web server. I used the microsoft internet information server that comes with win2000. It's an add on component on the disk. Oracle would suggest you use Oracle 9i application server ( Which is rebadged Apache )
Forms server is running on port 9000. Also set in the registry.
You also edit the in the formsweb.cfg file in <ORACLE_HOME>\forms60\server
Make sure HTTP mode is set in this too. You can also change various params such as the applet size etc. I would recommend the Oracle look and feel and run in separate windows options.
All the forms tester does is run a bit of cgi which will dynamically change the base HTML file in <ORACLE_HOME>\forms60\sever.
You will notice there is one file which is baseie and basejint. The cgi will choose to use the one depending on if you choose to use jinitiator or ie50=native.
When you go live can maually edit these files depending on what java viutual machine you choose. You can place this file in your web site root as defaut.htm or whatever you want and it will serve you app without using the cgi html generator.
Sorry if parts of this you know but it took me weeks of work to set this up. The Oracle documentation is not very well put together.
I have read nearly every line of the damn stuff.
Please e-mail me if you have any queries as I may have not made sense in places.
Oliver
null

Redirect to a custom error page when Forms Server shuts down

Hi,
I want the forms application to redirect to a custom error page whenever Forms Server goes down. (like network issues, unscheduled shutdown...) Whenever this happens, the user gets a pop up with FRM messages and user has to acknowledge the pop up. Since the application is used in the shop floor, there will not be any user always in front of the screen and will be a very big issue as there are at least 70-80 PC's on the floor which will be attended fewer times(only when there is issue with the machine) other wise the application displays important events of the machine,etc.,
I am trying to develop a simple HTML error page(may be with applet) which will keep querying the forms server and once the forms server is up and running, the error page will revert back to the application which the user was working earlier to shutdown. Other option is the redirect to main menu of the application (this may be a PSP or a JSP or a Oracle Forms Menu ).
Is there any event in forms to capture the loss of connection to forms server ??
BTW, I am using Oracle Application Server 10g Forms and Reports on Windows 2000 Server...
Any ideas...
Thanks in advance
Purush

I don't think it will be easily possible in Forms for a couple of reasons.
1. In Forms you do not have query rights, and as soon as you want to edit data, you have to log in. In Forms you log in once, and this sets your rights for the whole session. You will have to do some programming in Forms to achieve what you want. E.g. as soon as you hit the Save button you are asked for a username and password.
2. A refresh cannot be done in Forms. Remember that Forms is a Java applet. The URL in the browser is just pointing to the startup page only. If you refresh your screen, you are taken back to the login screen of Forms again.
Well, there will probably be ways around these problems. I'm thinking in the line of calling every form in a separate URL instead of starting a Forms application where one form is called from another form. The default 'query only' form can be called from a startup html page. This page can be refreshed. As soon as the user wants to update data, he clicks on a link or button and is taken to a login form.
If the refresh is unsuccessful you are taken to a custom error page, like in your ASP application.
A problem with an automatich refresh may be hanging sessions. Forms server does not always kill sessions.
And also, how would you avoid a refresh if a user is currently using the form?

Error en Forms server 6i in Linux

Hello!,
I am trying to execute forms in Linux, which were created in Windows, have created myself a file for this (I put but below), but when I execute it he/she always gives me the same error,FRM-91500: Unable to start/complete the build. Somewhere around in some message I have read that it could be because it was low the Form60_Server this running.
I attach but below the compilation script
Please I need a help!!
Thank you!!
Anibal Duardo
Here de scrit
#!/bin/bash
export DISPLAY=galadriel.libertad:0.0
# Variables para entorno de Forms
export ORACLE_HOME=/home/oracle8i/formrep
export ORACLE_SID=inmob
export MODULOS_FMB=$ORACLE_HOME/tools/web60/html
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
#:${LIBRARY_PATH}
export TK60_ICON=$ORACLE_HOME/tools/devdem60/bin/icon
export UI_ICON=$TK60_ICON
export DEMO60=$ORACLE_HOME/tools/devdem60
# Variables para Form Runtime
export FORMS60_PATH=$ORACLE_HOME/tools/devdem60/demo/forms
export FORMS60_TERMINAL=$ORACLE_HOME/forms60/admin/terminal/US
# Variables para Reports
export REPORTS60_PATH=$ORACLE_HOME/tools/devdem60/demo/reports
export REPORTS60_TERMINAL=$ORACLE_HOME/reports60/admin/terminal/US
export REPORTS60_TMP=/tmp;
# Variables para el Forms server
export OWSPORT=9191
export FORMS60_UNKNOW=$ORACLE_HOME/guicommon6/tk60/admin/tk2Motif.rgb
export FORMS60_OUTPUT=/tmp
export FORMS60_MAPPING=http://192.168.3.3:$OWSPORT/web_temp
export FORMS_REPFORMAT=html
# Variables para Graphics
export GRAPHICS_WEB_DIR=$ORACLE_HOME/tools/devdem60/demo/graphics
export OWS_IMGS_DIR=$ORACLE_HOME/tools/devdemo60/web
# Project Builder
export ORACLE_AUTOREG=$ORACLE_HOME/guicommon6/tk60/admin
# User specific environment and startup programs
export PATH=$PATH:$HOME/bin:$ORACLE_HOME/bin
f60genm module=$MODULOS_FMB/modulo.fmb userid=scott/tiger@pppp > result.log

Somewhere around in some message I have read that it could be because
it was low the Form60_Server this running.You can replace the FMX if it is being used. Did you try it with the server shutdown and all runtime processes stopped?
Regards,
Robin Zimmermann
Forms Product Management

Stopping Repainting in Form Server

Hi All,
We are calling a new form from an existing form using NEW_FORM - built-in. Now when the forms are run on the server, there is a distinct gap in time period between opening the new form, and closing the old one i.e. the old form closes, and it takes a few seconds for the new form to open, thus anything on the Windows behind is displayed.
Can we stop the repainting of the forms in between the closing and opening sequence i.e. the form will be repainted only after the new window opens, and it would look that the new window has replaced the old window, and the background windows would not be visible.
Any help/ pointers would be highly appreciated.
Thanx,
Suvendra
[email protected]

Ban chay tu form server ha. Ban cau hinh chua dung roi. Ban hay cau hinh lai file configure de chay

Form doesn't display Crystal Viewer

Hello,
I'm working with Crystal Report for Visual 2010, I have little experience working with crystal. The problem is, my application in the local machine displays correctly the report but when is running on the server the form doesn't display the crystal report viewer, neither displays any error. But the crystal report is generted correctly becuase the form has a button to send the roport by email and the report is sent correctly. I think the crystal report reports is well intalled in server because donsn't throw any error but something is missing.
Thank you, I hope somedoby can help me.

See if Kb [1605773 - CRVS2010 web viewer is not displying the Crystal report|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633303335333733373333%7D.do] will help.
The KB essentially supports what both Bhushan and Pooja indicated.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

OAS9i - Forms Server 6i Display

Similar Messages

Maybe you are looking for