OBIEE Answers does not display the result set of a report query

Hi,
We have a pivot table type of report in Oracle Business Intelligence Enterprise Edition v.10.1.3.3.2 Answers that has the following characteristics:
 3 Pages
 3 Sections , 4 Columns
 18363 Rows in the result set
As per the NQQuery.log, the query for this report executes successfully resulting in 18363 rows. However, nothing comes up in the display on Answers. Moreover, no error is reported. The instanceconfig.xml file has the following setting:
<PivotView>
 <CubeMaxRecords>30000</CubeMaxRecords>
 <CubeMaxPopulatedCells>300000</CubeMaxPopulatedCells>
</PivotView>
Even with these settings, Answers just returns a blank page - nothing is displayed in the name of the result set of the report query. Has anyone encountered this problem scenario before?
Any help is much appreciated.
Thanks,
Piyush

Hi Fiston / Pradeep,
Thanks for your inputs. A few points to note:
-> I am actually not getting any error message in answers or the NQQuery log. Moreover I am not getting any errors related to "query governor limit exceeding in cube generation" also.
-> I have other pivot table type of reports in the same repository that work fine. In fact the report which has this issue even works sometimes - what actually is happening is that if I alter the number of sections from 3 to 4, then the result set changes from 14755 Rows to 18363 Rows and as per the NQQuery.log in both cases the query completes successfully. However, when the result set has 14755 rows, I get to see the output in Answers; however when the result set is 18636 rows, the Answers screen just goes blank and does not show any output or error. This makes me believe that there is some parameter in instanceconfig or the NQSconfig file - I have tried a lot of changes but nothing works !
Any help is much appreciated.
Best Regards,
Piyush

Similar Messages

CRM 2013: Iframe does not display the url set in onform load event with setSrc. How to make this work?

I have a situation we need to display a url in Iframe when a form is loading. the url is set in code with setSrc, or updated the query string value. this worked in crm 2004 not any more in 2013. MSDN states the below to avoid in OnLoad event. what
is the best way to handle this situation? Searched web people recommend using setInterval which i dont want to use.
Any help on this issue is appreciated.
https://msdn.microsoft.com/en-us/library/gg328034(v=crm.6).aspx
Avoid using the OnLoad Event. IFRAMES and web resources load asynchronously and the frame may not have finished loading before the Onload event script finishes. This can cause the src property of the IFRAME or web resource
you have changed to be overwritten by the default value of the IFRAME or web resource URL property.

Thank you for you reply. this URL you send uses window.setInterval which i am not comfortable using it. we need to call clearInterval(),
if not the IFrame refresh every second.
function SetURL()
if(Xrm.Page.ui.controls.get("IFRAME_ActivitySmmary")!=null)
Xrm.Page.ui.controls.get("IFRAME_ActivitySmmary").setSrc(reportUrl + "&id="+ customerId);
Xrm.Page.ui.controls.get("IFRAME_ActivitySmmary").setVisible(true);
else
{ window.setInterval("SetURL()",1000);}

Discussion Forum does not display the items in Answered question ,Unanswered question views.

Hi All,
Discussion Forum does not display the items in Answered question ,Unanswered question views. Please find the below screen
what is the difference between Answered and unanswered view?
I have marked the discussion as question .
have replied for the question those discussion are visible in Unanswered view and the answered view is showings as no item to show.
Below screenshot is answered questions view.
Can you please help on this .
Thanks in advance ,
Sunitha

The discussion in which at least one of the replies is marked as "Best Reply" will show in the "Answered Questions" section.
Blog | SharePoint Learnings CodePlex Tools |
Export Version History To Excel |
Autocomplete Lookup Field

Why this query does not show the result?

Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
69662              HR                                 TABLE
                   OE                                 SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYS

Hi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl

This Formula(Function) compiles but does not display any result

Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
     v_all_positive NUMBER;
     v_all_negative NUMBER;
begin
     IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal + :quantity;
          END IF;
     ELSIF :transaction_type IN ('ISSUE') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal - :quantity;
          END IF;
     END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM

Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
     v_all_positive NUMBER;
     v_all_negative NUMBER;
begin
     IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal + :quantity;
          END IF;
     ELSIF :transaction_type IN ('ISSUE') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal - :quantity;
          END IF;
     END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM

When my Firefox language settings are fr_fr or fr_ca Firefox does not display the e with acute accent character correctly when it is displayed in a javascript alert box. However, it does display it correctly when my language settings are just fr. Please t

Firefox does not display the e with acute accent character correctly from a javascript alert box when my browser language settings are fr_ca or fr_fr. However, it does it correctly when my browser language setting is fr. How do i get it to display e with acute accent and other iso8859 characters correctly in a javascript alert box when my browser language settings are fr_fr and fr_ca?
== This happened ==
Every time Firefox opened

Use Unicode (UTF-8) for those characters.
Then you will always be sure that they are displayed correctly.

Hi I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail. *entered security key/password does not match the one set for for router. I know th

Hi
On my macbook pro
I'm try to set up a new Epson printer SX 445 to my router/network but each time I run the set up wizard it fails to complete saying Security Key/Password Check fail.
*entered security key/password does not match the one set for for router.
I know that the password is correct and have rechecked this by changing it a few times
and I still get the same result.
My network internet service provider is not interested and says to call Epson.
Anybody have any clues how I can resolve this?
Regards

I personally suggest the new Drobo FS. Since it has an iTunes server built in and you can use any size sata hard drive in it it is better and a NAS that has to use the same size drives.

My IPhone 4's mailing feature does not display the toolbar at the bottom for deleting, moving, or writing emails. What is wrong with it?

My work recently decided to buy every full time employee an IPhone 4 to be used for work purposes. (I do suspect these are refurbished, but I don't think that matters) I have had no trouble with it, except for on occasion the mailing feature does not display the toolbar at the bottom for deleting, moving, or writing emails. You know what I'm talking about...that bar at the bottom of the mailbox when you open an email that you use to delete, respond, forward, move, etc. It just goes away for no reason, and then reappears for a day or two, and goes away again. It is quite annoying since I can't respond to any of my emails without getting on my work computer. If you have any suggestions, please help!

Hi there,
You may need to force close the Mail application when this happens. The next time this happens, use the steps in the article below to coles out of the mail application.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Hope that helps,
- Griff W.

HT4157 I have an iPad 2 and it does not display the cellular data button under settings

I have an iPad 2 and it does not display the cellular data button under settings. It does display a Bluetooth button in its place. I have tried the reset but no luck

Is the iPad the Cellular version? Does it have an active Data plan? Does it have a Sim card installed in inside it?

Screen briefly flashes white but does not display the page when the Safari icon or other icons are tapped.

A problem has just started with my IPAD Air after 3 months of use.
If I try to open Safari by tapping on the icon the screen briefly flashes white but does not display the page.
Similarly if I try to open Settings page, Mail page, Calendar or Clock the screen just briefly flashes but the Apps do not run.
Some of the Apps do work on tapping the icon e.g. Maps, iBooks, Appstore, iTunes, Newstand etc.
I do have some website links which display when the icon is tapped e.g. John Lewis but some links do not work.
I have ensured that the ipad is fully charged, powered it off an on again, and cleaned the screen with a lint free cloth but the
same problem keeps occurring.

I saume you used a second display at one time, otherwise the Display settings wouldn't be treating your primary display as a secondary.
IF you open your System Preferences>Displays (-System Preferences) and click "Gather Windows" it should pull everything to the display on which you clicked it.

Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?

Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?
We prepared simple Word Press web site. We used a Revolution slider plugin with HTML5 video layer. It works properly on Chrome, Safari, older Mozilla FF.
But we had a problem on PC computers with FF 29.0 30.0 – after reinstall of browser everthing seems to be OK. The slider works. Unfortunately even the reinstallation on Mac computers does not help. There is no visible video on Mac FF 30.0.
We are looking for some information what we can do to solve this problem. Could you help?

Can you play the video on YouTube?
*http://www.youtube.com/watch?v=Ugh2YvHU7D0#t=58
Note that Mac lacks support to play MP4 files natively without using a Flash player.

Firefox does not display the basic menu line File Edit View etc. How do I get this menu to show. I have tried uninstalling and reinstalling, but that does not help

When I ask for help finding bookmarks, the answer tells me to click on bookmarks as shown in the illustration, but there is no such line displayed on my computer.

'''''"Firefox does not display the basic menu line File Edit View etc."''''': That is the Menu Bar; see below.
'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help) Firefox 3.6.x versions allow the user to hide the Menu Bar. 
*Tap the ALT key or the F10 key, Menu Bar will display, click View, click Toolbars, click Menu Bar to place a check mark next to it, '''''OR'''''
*Press and hold the ALT key while pressing the letters VTM on your keyboard, then release the ALT key
*See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Other Toolbars''', see: https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing 
'''Status Bar''': click View, click Status Bar to place a check mark 
'''Full Screen Mode''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen 
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
 
 
'''Other items that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins. 
 
*Adobe PDF Plug-In For Firefox and Netscape
**Current versions are 9.4.2 and 10.0.1 (aka Reader X)
**More info about version 10 (aka Reader X)
***New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
***See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.

Ibook g4 that does not display the battery meter, sound volume, tim

I have an ibook g4 that does not display the battery meter, sound volume, time & day.When i move cursor over the area where they should be I see a spinning beach ball beach ball

Choose Go to Folder from the Finder's Go menu and enter ~/Library/Preferences/ as the folder's path. Locate the item named com.apple.systemuiserver with or without a plist at the end, and drag it to the desktop.
(10471)

Oracle reports output in excel format does not display the graphs

Oracle reports output in excel format does not display the graphs: "linked image cannot be displayed".
The output file in PDF format the graph is supported.

Do you have any header and footer on your template?
If you have any header and footer then try to adjust it as of to display full page.
Thanks
Yasar

Itunes 10.6.1.7 I have 2 sets of playlists the first set displays greyed out lists and does not work The second set is fine. How do I get rid of the non working set of playlists?

I have 2 sets of playlists in the sidebar of itunes. I have recently upgraded to 10.6.1.7 but this condition remains the same
The top list refers to greyed out listings and does not function
The list below works fine
How do I get rid of the "false" list?

I think the greyed out playlists must be listed from your device which is set up to mirror your library. Because the device is synced you can't edit content directly on the device. From the top of the left-hand column do you have?
Library > Music, Movies...
Store > iTunes Store, iTunes Match...
Devices > <Your Device> > Music, Movies, and all the other "dummy" lists...
Genius > Genius, Genius Mixes...
Playlists > iTunes DJ, and then all your playlist folders and playlists...
If so then that is perfectly normal when your device is connected, either directly or over wi-fi and you have the lists expanded. Simply click the small triangle to the left of the device name to hide all the playlists.
tt2

OBIEE Answers does not display the result set of a report query

Similar Messages

Maybe you are looking for