Object Modelling Question: How do I create multiple nested table columns in one table

Hi there,
I have a XML doc which is as follows:
<PERSON>
<ADDRESSLIST>
<ADDRESS>111, Hamilton Ave </ADDRESS>
<ADDRESS>222, Cambell Ave </ADDRESS>
</ADDRESSLIST>
<PHONELIST>
<PHONENO>4085551212 </PHONENO>
<PHONENO>6505551212</PHONENO>
</PHONELIST>
</PERSON>
I need a table that looks as follows:
Create table person
(addresslist address_table,
phonelist phone_table
I would like to create a table called person with columns addresslist and phonelist. Each defined as object type table of address and table of phones.
Can anybody please tell me how can I do this.
I have seen that there can only be one nested table per table. If so, how do we do this.
Thanks so much
Pramod

pelle.k wrote:
peets wrote:Hehe because it's less typing!
Good one!
Also, it's by far the more dynamic method.
If you want to get pedantic, it's also far less efficient in terms of execution time: each iteration of the loop forks a new process, whereas using a single mkdir command forks only once. The "best" way is the curly-braces method demonstrated above by chimeric.

Similar Messages

Bash script question, how do I create multiple directories on one line

I am making a package for amavisd-new (yes I am aware that there is one in community but I can't say I like the way it is done).
I have an install script from which I want to create multiple directories if they do not exist.
So I want to create a directory /var/spool/amavis with subdirectories of var tmp virusmails spammassassin .
I can't seem to be able to find a way to do this on one line.

pelle.k wrote:
peets wrote:Hehe because it's less typing!
Good one!
Also, it's by far the more dynamic method.
If you want to get pedantic, it's also far less efficient in terms of execution time: each iteration of the loop forks a new process, whereas using a single mkdir command forks only once. The "best" way is the curly-braces method demonstrated above by chimeric.

How to insert records with LONG RAW columns from one table to another

Does anybody know how to use subquery to insert records with columns of LONG RAW datatype from one table to another? Can I add a WHERE clause in the subquery statement? Thanks.

Insert into ... Select statements are not supported for long or long raw. You will have to either use PL/SQL or convert your long raw to blobs.

Question: How to dynamically create multiple rows in a table together

I'm sure this is obvious to a seasoned person but I'm a newbie (just working with Forms for 1 week).
In the snapshot below I'm trying when I hit the Add button I'd like the two rows below the header in the table to replicate themselves below in the table.
Eventually there will be many rows to replicate. The problem is that I can't find a way to group these and then reference them by the javascript in the "add button" so that they replicate together.
any help/pointers etc. are much appreciated.
Thx

You can only add 1 row at a time .....so if you want to add three rows then you would have to run the command three times.
Make sense?
Paul

How do you create multiple events (different dates) from one large event?

I recently downloaded a large number of photos from my iphone to iphoto. All of the photos are now under event 4/9/2011 (the date and times are correct, just all in one event). How do I change/break up photos and add/change event dates? I don't want to scroll up hundreds (half a year) of photos to see photos I took yesterday.

Select the Event and go Events -> Autosplit
Regards
TD

Ecommerce site - how do I create several product pages using only one table of data?

Hi
Im designing an ecommerce clothing site for my assignment using an access database.
When I create the Data Set it takes all the information from my Acess table "Products" , creating one huge list of products on a single web page.
However, i would like to have the product data split across many web pages depending on there specific Category given [i.e. T-shirts, Jumpers, Trousers, Bags, Acessories].
Does anybody know how to do this? I think it involves setting certain Parameters, or writing a SQL statement in Dataset.
Thanks for any help
Amy

Hi Amy,
Here's a series of articles I did for Adobe Developer's Center, included is an example of a shopping cart app you can use as a staring point or an example if you like.
http://www.adobe.com/devnet/dreamweaver/articles/build_shopping_cart.html
http://www.adobe.com/devnet/dreamweaver/articles/build_shopping_cart_pt2.html
http://www.adobe.com/devnet/dreamweaver/articles/build_shopping_cart_pt3.html
Lawrence *Adobe Community Expert*
www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in ASP, PHP and CF

How do i creating multiple icloud accounts for one itunes account

how do i creating multiple icloud accounts to access one itunes account?

Perhaps you could explain a bit more what you want to do...
iCloud accounts don't access an iTunes account.
iTunes account is used to make purchases.

How do I create multiple-up pages populated with variable data?

I am trying to create a variable data Illustrator file but with a catch, I have to create multiple points of data on one artboard. I am using a template with 36 identical shapes, and I'm trying to add a different image to each based off of using variable data. I understand the premise of creating multiple output files based off of an illustrator file and data, but I have to create a single output file using 36 points of data, all QR codes. The reason is that this 36-up 14.5" x 14.5" sheet will be printed on a large format inkjet and then be fed into another machine (not a cutter) that requires that specific layout for it's process. I cannot create individual files, I need sheets based off of my 14.5" x 14.5" 36-up template.
Any suggestions other than making each shape in the template a separate variable (even though they are all the exact same shape) would be greatly appreciated.
My goal is to populate each of these shapes with a different QR code and then output the whole sheet as a single .EPS or .PDF file.

My goal is to populate each of these shapes with a different QR code and then output the whole sheet as a single .EPS or .PDF file.
You're barking up the wrong tree for this with Illustrator's Variables palette.
Think of it like this:
Imagine a typical spreadsheet with multiple rows of the same kind of data, except for the first row which serves as the "labels" of the columns.
The on-page objects which you define as Variables in Illustrator correspond to the first row; the column labels.
The datasets correspond to the following rows of values below the label row.
Cycling through the datasets simply moves up and down the rows, revealing one row's data at a time for each of the column labels.
Your multi-up array does not fit that data model. You are essentially trying to make a layout showing all the individual cells below the single label of one column (downward across all rows). (Illustrator's Variables feature doesn't even let you put multiple instances of a single variable in the document, so that the same value occurs in multiple places.)
You're trying to build the functional equivalent of a typical "gang up" press sheet, like a 10-up layout of business cards, each showing the same kind of data (name, phone, etc.) for multiple employees, so that you don't have to do separate press runs for each employee. That's certainly a common need, and one quite appropriate to a program like Illustrator. But Illustrator's Variables feature does not do that.
Essentially, what you are wanting to do is to replicate the basic functionality of any program which is used to print labels from data (like the typical mail merge function for address labels which are ganged up with some number of different labels on a page). What you want could be done in Illustrator via a custom JavaScript, but it would be a pretty silly exercise in reinventing the wheel. If it were me, I'd probably build the solution in FileMaker Pro (a database program), depending on the specific graphics requirements. However, you should be able to do it in InDesign, using its data merge feature.
JET

How can i create multiple accounts but use the same itunes?

how can i create multiple accounts but use the same itunes?

Hi iCloud is Making Me Go Crazy,
You will need to create a new Apple ID for your GameCenter and iCloud services. You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Cheers,
- Judy

How can I create multiple versions of a video within the same project?

OK...this is a probably a very basic question but I'm not sure how to word it clearly.
How can I create multiple versions of a video within the same project? What I mean is that I have a bout 50 minutes of video and I want to make two DVDs using different clips from this original 50 minutes of footage. It would be a real pain to have to re-import the video AGAIN for the second DVD. I suppose I could drop anything I don't want to burn to DVD back into the clips pane but that would wipe out all my transitions wouldn't it? I want to save each project in their “raw” form so I can burn additional DVDs later otherwise I would just do them one at a time and not care about one of them being destroyed.
Wow...that was a mess. Does anyone understand what the heck I’m asking? I hope so.

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?
I am attempting to create multiple live USBs within one flashdrive so that i can boot various operating systems without having to buy multiple USb sticks. I am using a Mac OS X Snow Leopard 10.6.8 Operating System currently. I am using the Terminal provided by the OS.
I would like to try Debian, Kali, Precise Puppy, and Sabayon- with one space left empty for whatever Linux OS I would like to try next. I have partitioned an 8GB flashdrive into the following sections:
name of intended OS,     space allocated for it:
1)Debian ........................1.32 GB
2)Kali..............................2.61GB
3)Precise Puppy..............163.7MB
4)Sabayon.......................1.77GB
5)TBD..............................2.14GB
I have figured out how to change the .iso files of the operating systems into .img files with the following commands:
hdiutil convert -format UDRW /path/to/input.iso -o /path/to/output.img
a .img.dmg file is created, this is corrected in the next line of code *please note: I am a a very beginner at programming, and would greatly appreciate any help. Thank you!
mv /path/to/output/file.img{.dmg,}
This is where I started to get confused:
I entered diskutil list to find the location of the partitions on my flashdrive, and this is the relevant section:
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk1
   1:                 DOS_FAT_32 DEBIAN               1.3 GB     disk1s1
   2:                 DOS_FAT_32 KALI                    2.6 GB     disk1s2
   3:                 DOS_FAT_32 PRECISE            163.7 MB   disk1s3
   4:                 DOS_FAT_32 SABAYON           1.8 GB     disk1s5
   5:                 DOS_FAT_32 TBD                     2.1 GB     disk1s6
This is the code I attempted to use and the subsequent result:
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: Resource busy
*at this point I went to the Disk Utility GUi and unmounted only the DEBIAN partition, now back to the terminal*
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: end of device
1259+0 records in
1258+1 records out
1320005632 bytes transferred in 1011.966891 secs (1304396 bytes/sec)
Please may someone help explain why I had a return value of +1 in my records in and how I can make it work properly.

I would like to know the answer to this as well. I tried renaming the 3D version by adding 3D after it, but it still not a separate movie in iTunes.
It's putting them in the same folder.

HT204053 how can i create multiple icloud accounts for my family members

how can i create multiple icloud accounts for my family members

Thanks... I appreciate the reply. Since I wrote the previous email, I actually went and changed my apple id (the main id) and the documentation I looked at said iCloud will set mail up automatically(?)... I had it working before.
Also, I tried to manually set up the ID via the Mail Accounts screen(s) and I can't figure out what my server information is... Pop or Imap? What's the outgoing server and the incoming server?
I typically have never had problems setting up mail accounts (in apple mail) with no problem.
Can anyone point me in the right direction?
Thanks in advance!

How can I create multiple sales orders with reference to one contract?

Hello Gurus,
Can you please how can I create multiple sales orders with reference to one contract?
thanks!
Rakesh

hi
Lets consider example
In your contract for line item 1 you have entered qty 100
You careated sales order with 70 quantity, and now you want to creat another sales order for 30
For this first you need to check what is your item category in contract (VA42)
Goto VOV7
SPRO - IMG - Sales and distribution - Sales - Sales document item - Define item categories - Go to change mode
Make the completion rule = B Item is completed after full quantity has been referenced

How can i create multiple versions of a photo in ios8?

I Often want to create different versions of the same photo....with different crops, contrast, etc and keep them. In iPhoto, that was done with the duplicate command, but there does not seem to be the same capability in ios8. Any ideas?

How can I create multiple versions of a video within the same project?
You can't. You make separate projects using the same or different clips, segments, transitions, titles, etc. You can even duplicate the first project and then modify/make the desired changes in the duplicated project. Each project can then be burned as a different DVD or as different titles on the same DVD if there is enough room.

How do I create multiple calendars on my iPad?

How do I create multiple calendars on my iPad?

I love stealing another users posts and here is one now ....
You don't create multiple calendars on the iPad.
The iPad is designed to be synced with a supported application on your computer for contacts and calendar events. The contact Groups I've created with the Address Book on my Mac and the different calendars I have with iCal on my Mac are available and kept synchronized with the my iPhone's Contacts and Calendar applications, and the same applies to the iPad.
Long story short, this is done with the supported application on your computer used for syncing contacts and calendar events.
The same principle applies to PC users. You have to sync within iTunes from a supported calendar application on your PC.

Object Modelling Question: How do I create multiple nested table columns in one table

Similar Messages

Maybe you are looking for