Object name not found error after upgrading to Visio 2013

Hello,
I have a C# application which uses the Visio drawing control. I have been working on making it compatible with Visio 2013. I get an error using Visio 2013 which I did not get using Visio 2010. The error is a COMexception:
Object name not found.
That is all the error says. The code which causes it to occur is as follows:
Document document = axDrawingControl1.Document;
document.Pages["page1"].Drop(document.Masters["Dynamic Connector"], 0, 0);
It does not seem to matter whether I use Dynamic Connector or Rectangle or any other shape, the error still occurs.
Here's the weird part: I tried out this code in a simple app with a Visio drawing control to see if I could figure out how to make it go away, and the error was still occurring for a little while, and then the code magically started working without me making
any changes to it. Unfortunately, it didn't start magically working in the original application so I'm still trying to figure out what is causing it.
Thanks for your help!

Did the error disappear once you'd created a document and added a dynamic connector shape to the drawing? If so then there is now a Dynamic Connector master stored in the document stencil (where masters used in the drawing are contained).
Paul Herber, Sandrila Ltd. Engineering and software shapes for Visio
Sandrila Ltd

Similar Messages

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

404 page not found error after upgrade to 4.0 from 3.x

We developed this application in 1.6 and a couple years ago upgraded to 3.2. We've just upgraded the Production version to 4.0.0 (that's what was on the Dev box). I understand that the template we used when developing it is now obsolete and I added some stuff to make it work properly (found tips here). In Dev it seemed to work correctly but now that it's in production we're getting a 404 Page not found error which "seems" to only occur after a search returns some results and you change the search criteria and try to rerun the search with this modified criteria without first leaving that page (if you click to a different tab and back before changing the search criteria you don't get the error). It doesn't matter which criteria field you change (date, text, LOV) the error comes up consistently. The criteria is submitted via a button (Go request). It's a PL/SQL function body returning SQL query. The only processes that are run is a Reset Pagination on the Go request.
Is there some quick setting that can be changed that causes this? Or something in 4.0 that is different that I need to change when submitting a page, etc... I can't see anything in the debug & all the variables do have appropriate values.

A column in the search results was changed to a Simple Checkbox when we upgraded to 4.0 (it has always been a checkbox in the older APEX versions). When I put it back to Standard Report Column I no longer get the page not found error.
Is there some additional/different setting I need to do in order to use the simple checkbox option in a search results set?
ETA: I see now that Checkboxes are not intended to work in standard report regions so I'll change them to LOVs or something and my problem should be solved.
Edited by: mimi_jones on Jul 18, 2011 6:16 AM

ITunes Helper.exe - Entry point not found error after upgrade

I just tried to install the latest iTunes software for Windows on two separate PCs running XP Pro SP3 and get the same error on both PCs at every windows startup: iTunes Helper.exe - Entry point not found. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll. Is this a known issue with a fix?

Hmmm. Roy B has some advice on that one in the following post:
http://discussions.apple.com/thread.jspa?messageID=10208523&#10208523

"Page not found" error after 5 minutes of see "processing" on the screen

We are using WebLogic 8.1 server and also the WebLogic proxy as our front end. When a user runs a process that takes over 5 minutes using the Proxy URL they receive an IE "Page not found" error after 5 minutes of seeing "processing" on the screen. If they run it on none Proxy URL (directly on WebLogic server) it works fine.
We have looked into the WLIOTimeoutSecs parameter and set in the web.xml for both the HttpClusterServlet and HttpProxyServlet, but this had no affect.
Is there another timeout that controls this 5 minute timeout? It seems if one uses Apache and sets the WLIOTimeoutSecs parameter to a higher number than 300 seconds there is not an issue.
Did this parameter get omitted for the WebLogic Proxy and if so, what does one use?
Thanks,
Jim

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
Kernel parameter: rdisp/gui_auto_logout
Kernel parameter: rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

File not found error after log on to ADF application

Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.

Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.

Page not found error after logging into oiddas

Hi all,
I have configured reverse proxy setup for my application server. from external portal is accessible( with proxy hostname externally and internally after login from internet) and also sso server administration site (same as portal ) but when i am trying to access oiddas page i am not able to login and i am getting page not found error. for ssocfg.sh i have given proxyHostName and proxyPort with https and i can see external name and it is redirected with external name for sso authentication but when i logged in i am getting page not found with http 404 msg and i have followed many docs in metalink w.r.t this error but couldn't resolve after too many trials and registrations. could someone help me on this. let me know if you need any information my internal address is http://localhost.localdomain.com:7777/ external(proxy)- https://portal.localdomain.com/
Thanks

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
Kernel parameter: rdisp/gui_auto_logout
Kernel parameter: rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

File not found error after database migration

Hi experts
I recently decided to create a test environment for SharePoint 2010 production server but after
attach the content database using power shell successfully I get “ file not found “ error when I try to login the top site collection
I think it’s because of customized master page in production site which I don’t know how to apply them to my new environment.I even tried to copy the master pages from cataloge throught SPD but it didnt work.
Any assistance would be greatly appreciated

HI Shahin,please try to access the site by below and let me know the result.please check the below link that gives more idea on the issue
_/_layouts/settings.aspx
/_layouts/viewlsts.aspx
/default.aspx
http://expertsharepoint.blogspot.de/2014/01/sharepoint-default-page-not-loading-by.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

"Page Not Found" Error after arnd 5 mins of processing on SAP Trans iView

Hello All,
We are facing an issue related to a SAP Transaction iView on our portal.
This transaction is supposed to upload an excel file in RPM and provide a log after the upload is performed. We are trying to upload around 180 projects and the processing goes on in the backend. The program in the backend works as required, but as the iView shows a page not found after around 5-6 mins of processing, the users cannot see the logs in the end!
I suppose there should be some kind of time-out parameter for the Transaction type iView, but we are not able to figure it out!!
We have tried the following parameters without success:
icm/server_port_0     = PROT=HTTP, PORT=8035, TIMEOUT=3600, PROCTIMEOUT=3600
icm/keep_alive_timeout (sec.) = 3600
icm/conn_timeout                = 5000
rdisp/plugin_auto_logout       = 1800
Please do suggest if there is anything else that we need to update to get this process to continue on the Portal and avoid the 'Page Not Found' issue.
Thank you for your time!
Regards,
Gaurav

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
    Kernel parameter:    rdisp/gui_auto_logout
    Kernel parameter:    rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

Changing ODBC Connection results in Field Name not found error

Post Author: POH
CA Forum: Data Connectivity and SQL
I am using CR XI with mySQL 5.0 and VB6. The computer I use to to design my reports has a odbc dsn which is used to develop the reports. On the production computer the same odbc dsn is present but has a different server, database, user and password entries. I am using the code below to set the connection and test the database. For Each objDatabaseTable In objDatabaseTables objDatabaseTable.SetLogOnInfo "servername", "dbname", "user", "pw" objDatabaseTable.ConnectionProperties("UseDSNproperties") = True Next crxDatabaseTable crxDatabase.Verify No Error is given and the report in this case does not have any sub reports.Now when the command ViewReport is run the CR viewer is shown but the report is not displayed. The viewer shows the error "Filed Name not found". I do not have any formel fields in the report and I have checked to make sur that both databases have the same structure. Can any body help me. Regards Paul

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

404 Not Found Error after 5.2 SP04 Patch04 deployment

Hi,
Today I did an installation and deployment of the 5.2 SP04 Patch 04 to one of our standalone
SAP ME Application Servers. The installation and deployment worked without any error.
However afterwards I could not login to SAP ME on the patched server.
I get a 404 Not found error page after entering my site, login and password. The page I am being redirected
to is http://<appserver>:50000/manufacturing/j_security_check?VALIDATE=true
The real funny thing started right after when I discovered that my other SAP ME Application Server (Which has
not been patched and is on 5.2 SP04 Patch03) started showing the same error message.
Anybody has an idea on what is going on?
Br,
Johan Nordebrink

Hi,
Yes both my SAP ME Database servers (WIP and ODS) are up and running.
After restaring my patched server this morning I found that before I get the 404 error during login I get a
message saying License file corrupted 11904.
On my other application server I don't get license file corrupted. There I get the 404 error but when I try to login again right after I am already logged in to SAP ME and can run the application.
This is the last default trace messages from my patched application server since this mornings restart:
#2.0 #2010 10 08 08:24:06:035#+0200#Warning#com.sap.engine.core.service630.container.ReferenceResolver#
com.sap.ASJ.krn_srv.000064#BC-JAS-EJB#sap.com/ejbormapping_api#1CC1DE01D044000000000006000006EC###com.sap.engine.core.service630.container.ReferenceResolver########Thread[main,5,main]#Plain##
Interface [ejbormapping] without declared provider#
#2.0 #2010 10 08 08:24:06:035#+0200#Warning#com.sap.engine.core.service630.container.ReferenceResolver#
com.sap.ASJ.krn_srv.000064#BC-JAS-EJB#sap.com/ejblocking_api#1CC1DE01D044000000000007000006EC###com.sap.engine.core.service630.container.ReferenceResolver########Thread[main,5,main]#Plain##
Interface [ejblocking] without declared provider#
#2.0 #2010 10 08 08:24:06:035#+0200#Warning#com.sap.engine.core.service630.container.ReferenceResolver#
com.sap.ASJ.krn_srv.000064#BC-JAS-ADM-MON#sap.com/dsr_ejbcontext_api#1CC1DE01D044000000000008000006EC###com.sap.engine.core.service630.container.ReferenceResolver########Thread[main,5,main]#Plain##
Interface [dsr_ejbcontext_api] without declared provider#
#2.0 #2010 10 08 08:24:06:035#+0200#Warning#com.sap.engine.core.service630.container.ReferenceResolver#
com.sap.ASJ.krn_srv.000064#BC-JAS-ADM-ADM#sap.com/visual_administration_api#1CC1DE01D044000000000009000006EC###com.sap.engine.core.service630.container.ReferenceResolver########Thread[main,5,main]#Plain##
Interface [visual_administration] without declared provider#
#2.0 #2010 10 08 08:24:24:159#+0200#Warning#com.sap.engine.services.deploy#
com.sap.ASJ-dpl.ds-000463#BC-JAS-DPL#deploy#1CC1DE01D044000300000000000006EC#1674450000000118##com.sap.engine.services.deploy#####aeb67914d2a411dfad841cc1de01d044##0#Service Runner [tcjecachemgmt~srv]#Plain##
Warnings:
   The Cache Configuration Upload container reports that doesn't support parallel operations, which slows down the deploy, update and remove operations with applications.
Solution: Please contact the container holder to fix these warnings.#
#2.0 #2010 10 08 08:24:39:112#+0200#Error#com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract#
#BC-ESI-WS-JAV#tcesiespsrv#1CC1DE01D044000B00000000000006EC#1674450000000768##com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract####AEB67914D2A411DFAD841CC1DE01D044#aeb67914d2a411dfad841cc1de01d044#aeb67914d2a411dfad841cc1de01d044#0#Service Runner [tcesiespsrv]#Plain##
There is problem reading the hostname from the ClusterManager. This could lead to improper wsdl links.#
#2.0 #2010 10 08 08:24:43:753#+0200#Info#com.sap.archtech.daservice#
#BC-ILM-DAS#sap.com/tcTechSrvXML_DAS#1CC1DE01D044001000000002000006EC#1674450000000042#sap.com/tcTechSrvXML_DAS#com.sap.archtech.daservice#Administrator#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [21]#Plain##
MasterMethod: An error occurred during the System Landscape Directory synchronization: Getting WBEMClient failed: com.sap.sldserv.exception.SldServiceRuntimeException: Destination SLD_Client not found. Destinations are defined in the Destination service.. Please check that destination SLD_Client is maintained correctly.
[EXCEPTION]
com.sap.sldserv.exception.SldServiceRuntimeException: Getting WBEMClient failed: com.sap.sldserv.exception.SldServiceRuntimeException: Destination SLD_Client not found. Destinations are defined in the Destination service.. Please check that destination SLD_Client is maintained correctly.
     at com.sap.sldserv.SldApplicationService.getWbemClient(SldApplicationService.java:150)
     at com.sap.archtech.daservice.commands.MasterMethod.synchronizeSystemLandscapeDirectory(MasterMethod.java:428)
     at com.sap.archtech.daservice.DASmain.init(DASmain.java:188)
     at javax.servlet.GenericServlet.init(GenericServlet.java:270)
     at com.sap.engine.services.servlets_jsp.server.security.PrivilegedActionImpl.run(PrivilegedActionImpl.java:97)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:396)
     at com.sap.engine.services.servlets_jsp.server.application.WebComponents.addServlet(WebComponents.java:336)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:977)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:288)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:212)
Caused by: com.sap.sldserv.exception.SldServiceRuntimeException: Destination SLD_Client not found. Destinations are defined in the Destination service.
     at com.sap.sldserv.SldApplicationService.getWbemClient(SldApplicationService.java:105)
     ... 13 more
#2.0 #2010 10 08 08:25:00:472#+0200#Warning#com.sap.engine.services.deploy#
com.sap.ASJ.dpl_ds.000554#BC-XI-IS-WKB#sap.com/com.sap.xi.mdt.soa#1CC1DE01D044001200000055000006EC#1674450000000001##com.sap.engine.services.deploy####BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Deploy Parallel Start Thread#Plain##
Global operation [startApp] over [application] [sap.com/com.sap.xi.mdt.soa] finished successfully for [578]ms on server [1674450
>>> Warnings <<<
     1). Application sap.com/com.sap.xi.rwb is not deployed, but resolving of application sap.com/com.sap.xi.mdt.soa continues because it has weak reference to this application.]#
#2.0 #2010 10 08 08:25:01:144#+0200#Error#System.err#
#BC-JAS-WEB-JSF#ecjavajsf#1CC1DE01D044001600000000000006EC#1674450000000984#sap.com/xapps~ra.edm.prjmgmt.jee.app#System.err#Guest#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [18]#Plain##
Oct 8, 2010 8:25:01 AM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing JSF 1.2_08 for context '/EDMProjectWEB'
#2.0 #2010 10 08 08:25:02:237#+0200#Error#com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet#
#BC-JAS-ADM#sap.com/tclmitsamuicontentmodelear#1CC1DE01D044001700000000000006EC#1674450000001041#sap.com/tclmitsamuicontentmodelear#com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet#Guest#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [21]#Plain##
SAP_NWA_READONLY group does not exist
[EXCEPTION]
com.sap.security.api.NoSuchGroupException: Group "SAP_NWA_READONLY" does not exist.
     at com.sap.security.core.imp.GroupFactory.getGroupByUniqueName(GroupFactory.java:1429)
     at com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet.init(RoleToGroupMappingServlet.java:82)
     at javax.servlet.GenericServlet.init(GenericServlet.java:270)
     at com.sap.engine.services.servlets_jsp.server.application.WebComponents.addServlet(WebComponents.java:324)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:977)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:288)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:280)
#2.0 #2010 10 08 08:25:02:237#+0200#Error#com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet#
#BC-JAS-ADM#sap.com/tclmitsamuicontentmodelear#1CC1DE01D044001700000001000006EC#1674450000001041#sap.com/tclmitsamuicontentmodelear#com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet#Guest#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [21]#Plain##
SAP_NWA_FULL group does not exist
[EXCEPTION]
com.sap.security.api.NoSuchGroupException: Group "SAP_NWA_FULL" does not exist.
     at com.sap.security.core.imp.GroupFactory.getGroupByUniqueName(GroupFactory.java:1429)
     at com.sap.tc.lm.itsam.ui.config.registration.RoleToGroupMappingServlet.init(RoleToGroupMappingServlet.java:99)
     at javax.servlet.GenericServlet.init(GenericServlet.java:270)
     at com.sap.engine.services.servlets_jsp.server.application.WebComponents.addServlet(WebComponents.java:324)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:977)
     at com.sap.engine.services.servlets_jsp.server.deploy.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:288)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:280)
#2.0 #2010 10 08 08:25:14:987#+0200#Info#com.sap.me.trace#
##sap.com/meear#1CC1DE01D044001900000000000006EC#1674450000001163#sap.com/meear#com.sap.me.trace.VM#Guest#0##BAB53AFBD2A411DFA501000000198CD2#bab53afbd2a411dfa501000000198cd2#bab53afbd2a411dfa501000000198cd2#0#Application [18]#Plain##
SAP Manufacturing Execution Base 5.2.4.4 11 112868#
#2.0 #2010 10 08 08:26:35:096#+0200#Error#com.sap.me.trace#
##sap.com/meear#1CC1DE01D044001A00000000000006EC#1674450000000004#sap.com/meear#com.sap.me.trace#Guest#0##AF1CFA4DD2A411DF9F991CC1DE01D044#af1cfa4dd2a411df9f991cc1de01d044#af1cfa4dd2a411df9f991cc1de01d044#0#Thread[HTTP Worker [@1499959050],5,Dedicated_Application_Thread]#Plain##
The Login ID is missing.#
#2.0 #2010 10 08 08:26:35:112#+0200#Error#com.sap.me.trace#
##sap.com/meear#1CC1DE01D044001A00000001000006EC#1674450000000004#sap.com/meear#com.sap.me.trace#Guest#0##AF1CFA4DD2A411DF9F991CC1DE01D044#af1cfa4dd2a411df9f991cc1de01d044#af1cfa4dd2a411df9f991cc1de01d044#0#Thread[HTTP Worker [@1499959050],5,Dedicated_Application_Thread]#Plain##
Login module exception. com.sap.me.frame.security.loginmodules.common.MfgLoginException: null#
Br,
Johan

"File Not Found" Error after Restoring Sharepoint List

Hello,
I restored a Sharepoint List via Powershell and all seemed to work fine. The Import-Log sais 0 Warnings and 0 Errors.
When I access the List now i can see all the Items, but when i click a Item to access it, i get a "File Not Found"-Error.
May the Alternate Access Mappings be the Problem? The List is restored from another Sharepoint-Farm that was accessed by different URLs.
What can i do to access the Items? Thanks for your help!

How was this list moved? Using export-import? Do you still have the old list in the old environment? Can you turn off dialogs on the list so that we can tell where exactly it is navigating to? Can you also install fiddler to see the web hops?
Pranav Sharma
SharePoint Consultant, Portal Solutions

Page Not Found Error after Installation

I just installed coldfusion 7. For some reason the flash
remoting did not get installed or enabled. Everything appears to
say it installs by default. Go to
http://localhost/flashservices/gateway.
I get a page not found error and it shoots to
http://localhost/flashservices/.
Did I miss a step somewhere?
I installed on a Windows XP box with IIS under the
C:\Inetpub\wwwroot. Is there something I can check or do? I am
pulling my hair out over this. Please help.
Thanks in advance.

Better use BASIC installation type. If you go for advance installation you have to very carefull selecting all the key parameters. Are you looking for more specific ?? then can you please tell us the purpose of choosing advance installation type.
Regards
Rajesh

Cisco Prime LMS 4.1 - /cwportal/group/lms/lms not found error after login

After upgrading the MDF (Common Services) and the device packages on our Cisco Prime LMS 4.1 installation we now get an error after logging in. The error is as follows;
Status
Not Found The requested resource was not found.
https://X.X.X.X/cwportal/group/lms/lms
The top of the page is the normal menu and anything we choose there works fine so we only see this just after logging in to CiscoWorks.
Has anyone experienced this problem or do you have any idea what might be causing it?
The installation is running on a Cisco appliance.
kind regards,
Michel

It's being access from a client using Internet Explorer 8 (which is what I'm forced to use due to company policy) by access the DNS name of the ciscoworks server and logging in.. It worked previous to installing the patches so I'm not exactly sure what has happened. I'll try to get another PC to test from though to see if it's something to do with my browser or PC.
If I add -configuration to the url it works just fine.

Display as Key and Name Not working properly after upgrade to Bi7.0

Hi Bw Guru's
Recently we have upgrade our BW 3.5 system to BI 7.0 (Only system upgrade not applications ).
after the upgrade we are facing lot of issues with Bex Analyzer. The following are some of the issues
1) In BW3.5 after the execution of Workbook or query ,we can convert to local currency .
Right click on workbook -> Currency translation-> Database currency .
but after upgrade to BI7.0 this is not working ..
2) Characterstic Right click on workbook Dispaly as Key and Name is also not working ..
I know that Currency translation in BI7.0 works in different way compare to BW3.5 .we can use alternate option like By Target Currency from Database currency to convert to local currency and it is working fine in Bex,but businesss users want more friendly way ...because to select the above option they have to enter local currency and rate type ...
Do you we have any notes available for the above solutions ..?Do we need to upgrade Bex version also..?Is there any document which describe how the above things works after system upgraded to BI7.0?
Please suggest me..
Thanks in advance
Shu Moh.

Dear Harita
The first issue Currency translation in query or workbook is solved with SAP note 1119549.For second issue we have not found solution until now ,Once we find the solution we will update you..
Shu Moh

Object name not found error after upgrading to Visio 2013

Similar Messages

Maybe you are looking for