Object reference error while using DM add-in in excel

hi everyone!
I instelled data mining add-in for excel 2013, tried to use it - several tools was available, other needed MS SQL Server - i installed it too, connected Excel to Server and now a can't use this add-in at all. All i see is error "Object reference not
ser to an instance of an object".
Excel 2013 64 bit
MS SQL Server 2014 Trial version
Powerpivot included
Thank you in advise!

did u deploy your dbadapter through console to the plan mentioned for deployment?

Similar Messages

Deplyment error while using service reference

Hi All,
I'm facing similar error where I get the following error when i try to run the application.
Following error i get when i try to deploy
Failed to prepare application ''sap.com/asp_all_sites'' for startup. Reason= Clusterwide exception: Failed to start dependent service ''PORTAL:sap.com/com.sap.compatibility50.cache.cache'' of application ''sap.com/asp_all_sites''. Status of dependent component: STATUS_MISSING. Hint: Is the component deployed correctly on the engine?
I have added this in Sharing references but yet it doesn't help me. I'm using ICacheService in my code.
This **URGENT** Deplyment error while using service reference i was following but could not arrive at any result
Please advise
Thanks
Srikant

Hi All
I'm getting following error whenever I deploy:
11-dec-2007 18:03:17 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] WARNING:
[009]Deployment finished with warning
Settings
SDM host : aixlp203
SDM port : 52618
URL to deploy : file:/C:/DOCUME1/sdurgama/LOCALS1/Temp/temp24205sap.com~zsp_all_sites.ear
Result
=> deployed with warning : file:/C:/DOCUME1/sdurgama/LOCALS1/Temp/temp24205sap.com~zsp_all_sites.ear
Finished with warnings: development component 'zsp_all_sites'/'nl.essent'/'local'/'20071211180226'/'0':Caught exception during application startup from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Error occurred while starting application nl.essent/zsp_all_sites and wait. Reason: Clusterwide exception: server ID 263194450:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Application sap.com/zsp_all_sites cannot be started. Reason: it has hard reference to resource com.sap.portal.compatibility50.cache with type application, which is not active on the server. at com.sap.engine.services.deploy.server.ReferenceResolver.processReferenceToApplication(ReferenceResolver.java:580) at com.sap.engine.services.deploy.server.ReferenceResolver.processMakeReference(ReferenceResolver.java:399) at com.sap.engine.services.deploy.server.ReferenceResolver.beforeStartingApplication(ReferenceResolver.java:328) at com.sap.engine.services.deploy.server.application.StartTransaction.beginCommon(StartTransaction.java:162) at com.sap.engine.services.deploy.server.application.StartTransaction.begin(StartTransaction.java:136) at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292) at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:342) at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:126) at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:245) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4707) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4612) at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4585) at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1163) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:215) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
The things I have done so far:
1. Deployed the custom library and refered in library references. Its the same name as it is Visual Admin
2. Added Cache API Jar file as external Jar file; added the Sharing reference and also all the steps mentioned in the following link:
Webdynpro DC and J2EE DC
3. The DC builds properly but fails at deployment
My question is there any way that I can manually start the service.
I find the application in Server >> Services >> Deploy is with invalid kind of symbol (neither blue checked symbol / red cross symbol). How do I restore the application
I using ICacheServices in my code using Sharing references
like (ICacheService)WDPortalUtils.getServiceReferences("com.sap.compatibility50.cache.cache"). is this right
Please let me know
Thanks in advance
Srikant

Error while using DB Adapter in BPEL process

Hi All,
I am getting error while using DB Adapter in BPEL process
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:575) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:97) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:90) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:309) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:94) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:91) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:985) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:729) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:569) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'DevDBAdapter' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. DBAdapterDemo:DevDBAdapter [ DevDBAdapter_ptt::DevDBAdapter(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/Dev'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/Dev. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:955) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:750) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:234) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:105) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 72 more
I have created jndi from console which I have mentioned in DBAdapter and I have provided details of JNDI to DbAdapter in deployment.
I am not able to solve this.
Can you please let me know solution for this or provide me link for tutorial of DBAdapter for stored procdure call?

did u deploy your dbadapter through console to the plan mentioned for deployment?

3-1674105521 Multiple Paths error while using Bridge Table

https://support.us.oracle.com/oip/faces/secure/srm/srview/SRViewStandalone.jspx?sr=3-1674105521
Customer Smiths Medical International Limited
Description: Multiple Paths error while using Bridge Table
1. I have a urgent customer encounterd a design issue and customer was trying to add 3 logical joins between SDI_GPOUP_MEMBERSHIP and these 3 tables (FACT_HOSPITAL_FINANCE_DTLS, FACT_HOSPITAL_BEDS_UTILZN and FACT_HOSPITAL_ATRIBUTES)
2. They found found out by adding these 3 joins, they ended with circular error.
[nQSError: 15001] Could not load navigation space for subject area GXODS.
[nQSError: 15009] Multiple paths exist to table DIM_SDI_CUSTOMER_DEMOGRAPHICS. Circular logical schemas are not supported.
In response to this circular error, the developer was able to bypass the error using aliases, but this is not desired by client.
3. They want to know how to avoid this error totally without using alias table and suggest a way to resolve the circular join(Multiple Path) error.
Appreciated if someone can give some pointer or suggestion as the customer is in stiff deadline.
Thanks
Teik

The strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3" 5.406 KB 1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

Run time error while using Class gcl_error

Hi All,
I am getting run time error while using class gcl_error
                                      type REF to zsreport_error_handling:
'' Attempt to access a component using 'NULL' object reference (points to nothing).
An object reference must point to an object ( an instance of a class) before you can use it to access components ( variable : ''GCL_ERROR'').
Either the reference point has not yet been set or it has been reset to 'NULL' by a clear statement."
Can you please suggest any solution for this ?
Thanks in advance.

Dear All
Its Resolved Thanks For your Valuable time Support
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                    WA_AVBBD-APOMOBILE
                                    DA_SUBRC
                                    DA_UPDKZ
                                    DA_VVBBD_TABIX
                                    0.
This Was the Error some how 0 was there we are removed the 0 now it is working fine
Rgds
Thomson

Adding itemCreationPolicy="immediate" on mx:Panel causes null object reference error in Flex 4.x

The itemCreationPolicy works fine with spark components and other mx component until we hit by mx panel.
Looks like an error is thrown from StyleProtoChain.
The interesting thing is the null object reference error both occurs in Flex 4.0 and Flex 4.1, but caused by different objects.
Is there a workaround to use itemCreationPolicy on mx panel?
Thank you.

Yes, there are all kinds of problems when you remove something from the screen that had focus (for instance, at that point you can't capture keyboard events either).
My code is sprinkled with so many things to make sure something is in focus, I tend to forget that I've done it.
In your code that changes the currentState, add
this.setFocus()
HTH;
Amy

Error while using BAPI_SAG_CREATE

Hi,
I'm getting the below error while using using BAPI_SAG_CREATE :
No instance of object type PurchSchedAgreement has been created. External reference: # 1
I'm trying to cerate scheduling agreement. If anyone has worked on similar issue, plz advise.
Thanks

closed

Error while using exp utility

Hi,
I am getting the following oracle error while using exp,
can someone please suggest on this,
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user SIEBEL
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user SIEBEL
About to export SIEBEL's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export SIEBEL's tables via Conventional Path ...
. . exporting table EIM_ACCDTL_TNT
EXP-00008: ORACLE error 904 encountered
ORA-00904: "MAXSIZE": invalid identifier
. . exporting table EIM_ACCNTROUTE
EXP-00008: ORACLE error 1003 encountered
ORA-01003: no statement parsed
. . exporting table EIM_ACCNT_CUT
EXP-00008: ORACLE error 904 encountered
ORA-00904: "MAXSIZE": invalid identifier
. . exporting table EIM_ACCNT_DTL
EXP-00008: ORACLE error 1003 encountered
ORA-01003: no statement parsed

Satish is right, there exists bug for 11.1.0.6.
Look at metalink note 741984.1.
Bug number is 5872788 - there exists patch as well.

Error while trying to add a Model

I am getting the following error while try to add a new Model.
java.sql.SQLException: ORA-00001: unique constraint (SNPW.PK_MODEL) violate.
I am using 10.1.3.4.4 version of ODI. Can any help me to solve the issue.

Are you trying to create a new Model or trying to import a Model ?

We're sorry. It seems there is a problem. Please try using Gmail with a supported browser. If you're encountering this error while using a supported browser, we

after the last udpate I can no longer access gmail or youtube. the error message from gmail is: We're sorry. It seems there is a problem. Please try using Gmail with a supported browser. If you're encountering this error while using a supported browser, we suggest alerting your Internet Service Provider (ISP) that a proxy is failing to accept cookies on HTTP redirects.
youtube just lists some generic issue regarding cookies, and my cookie settings are wide open. I can open both with safari so it is a firefox issue.

Did you install any new add-ons lately? I see listed:
AddThis 3.5.9 ({3e0e7d2a-070f-4a47-b019-91fe5385ba79}) 
Advertising Cookie Opt-out 1.5 ([email protected]) 
Flash Video Downloader 5.3.2 ([email protected]) 
Garmin Communicator 4.1.0 ({195A3098-0BD5-4e90-AE22-BA1C540AFD1E}) 
socialvest 0.5.5 ([email protected]) 
Troubleshooter 1.1a ([email protected]) 
eMusic Community Toolbar 3.21.0.1 ({9ee802e8-c931-47ab-b570-aa8f791598ca}) (Inactive)
Are any of these new?

Error while using CALL METHOD

I am getting a error while using CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
The error is class "CL_SSF_XSF_UTILITIES is unknown. How to correct that?? please help I am new to object oriented programming??
Edited by: priya singh on Nov 18, 2008 2:14 PM

This is my code.
REPORT ZSAVE_FUNCTION .
D A T A D E C L A R A T I O N S *
DATA: v_bitmap TYPE xstring, "graphic data
v_file TYPE string, "file name
v_length TYPE i. "length of binary file
DATA: BEGIN OF it_bitmaps OCCURS 0,
object TYPE tdobjectgr, "object
name TYPE tdobname, "name
id TYPE tdidgr, "id
tdbtype TYPE tdbtype, "graphic type
END OF it_bitmaps.
DATA: itab TYPE TABLE OF x.
*class cl_ssf_xsf_utilities definition.
public section.
methods : get_bds_graphic_as_bmp
DATA: L_GRAPHIC_XSTR TYPE XSTRING.
*method cl_ssf_xsf_utilities
S E L E C T I O N - S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_object TYPE tdobjectgr, "object
p_btype TYPE tdbtype, "graphic type
p_name TYPE tdobname, "name
p_id TYPE tdidgr. "id
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: p_file TYPE rlgrap-filename. "file name
SELECTION-SCREEN END OF BLOCK b2.
*A T S E L E C T I O N - S C R E E N O N V A L U E - R E Q U E S T *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_name.
*-- Creating f4 help for the parameters
PERFORM get_f4_object_name.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*-- Getting the current value entered
PERFORM get_current_value.
*-- Value Request Functionality For Input File Name
PERFORM f4_value_request.
S T A R T O F - S E L E C T I O N *
START-OF-SELECTION.
*--Getting the graphic as a BMP file
PERFORM get_graphic_bmp.
*--Convert the Xstring format to binary format
PERFORM convert_to_binary.
*--Download the graphic
PERFORM download_graphic.
*& Form get_current_value
Get the current file path entered
FORM get_current_value .
DATA: BEGIN OF li_dynp_value_tab OCCURS 0.
INCLUDE STRUCTURE dynpread.
DATA: END OF li_dynp_value_tab.
DATA: l_program_name LIKE d020s-prog,
l_dynpro_number LIKE d020s-dnum.
l_program_name = sy-cprog.
l_dynpro_number = sy-dynnr.
REFRESH li_dynp_value_tab.
li_dynp_value_tab-fieldname = 'P_FILE'.
APPEND li_dynp_value_tab.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = l_program_name
dynumb = l_dynpro_number
TABLES
dynpfields = li_dynp_value_tab
EXCEPTIONS
invalid_abapworkarea = 04
invalid_dynprofield = 08
invalid_dynproname = 12
invalid_dynpronummer = 16
invalid_request = 20
no_fielddescription = 24
undefind_error = 28.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE li_dynp_value_tab INDEX 1.
p_file = li_dynp_value_tab-fieldvalue.
ENDFORM. " get_current_value
*& Form f4_value_request
Provinding the f4 for the given path
FORM f4_value_request .
*-- if the file is to be downloaded to presentation server
CALL FUNCTION '/SAPDMC/LSM_F4_FRONTEND_FILE'
EXPORTING
pathname = p_file
CHANGING
pathfile = p_file
EXCEPTIONS
canceled_by_user = 1
system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_value_request
*& Form GET_GRAPHIC_BMP
Get the graphic as a BMP file
FORM get_graphic_bmp.
CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
EXPORTING
p_object = p_object
p_name = p_name
p_id = p_id
p_btype = p_btype
RECEIVING
p_bmp = L_GRAPHIC_XSTR
EXCEPTIONS
not_found = 1
internal_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " GET_GRAPHIC_BMP
*& Form CONVERT_TO_BINARY
Converting the xstring to binary format
FORM convert_to_binary .
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = v_bitmap
IMPORTING
output_length = v_length
TABLES
binary_tab = itab.
ENDFORM. " CONVERT_TO_BINARY
*& Form DOWNLOAD_GRAPHIC
Download the graphic
FORM download_graphic .
v_file = p_file.
CONCATENATE p_file '.BMP' INTO v_file.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = v_length
filename = v_file
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DOWNLOAD_GRAPHIC
*& Form GET_F4_OBJECT_NAME
Get F4 values for object names
FORM get_f4_object_name .
DATA: dynpfld_mapping TYPE STANDARD TABLE OF dselc WITH HEADER LINE,
return_tab TYPE STANDARD TABLE OF ddshretval WITH HEADER LINE.
*--Selecting the values to be provided as f4 help
SELECT tdobject
tdname
tdid
tdbtype
FROM stxbitmaps
INTO TABLE it_bitmaps.
*--To update the values in the remaining fields
dynpfld_mapping-fldname = 'F0001'.
dynpfld_mapping-dyfldname = 'P_OBJECT'.
APPEND dynpfld_mapping.
dynpfld_mapping-fldname = 'F0002'.
dynpfld_mapping-dyfldname = 'P_NAME'.
APPEND dynpfld_mapping.
dynpfld_mapping-fldname = 'F0003'.
dynpfld_mapping-dyfldname = 'P_ID'.
APPEND dynpfld_mapping.
dynpfld_mapping-fldname = 'F0004'.
dynpfld_mapping-dyfldname = 'P_BTYPE'.
APPEND dynpfld_mapping.
*--Providing f4 help with the selected values
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'TDOBNAME'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_NAME'
value_org = 'S'
TABLES
value_tab = it_bitmaps
dynpfld_mapping = dynpfld_mapping
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " GET_F4_OBJECT_NAME

ORA-00902: invalid datatype comile error while using CAST function

Hi everyone,
I'm getting ORA-00902: invalid datatype compilation error while using CAST function.
open ref_cursor_list for select empName from TABLE(CAST(part_t AS partnumberlist));
The partnumberlist and ref_cursor_list is declared in the Package spec as given below.
TYPE ref_cursor_list IS REF CURSOR;
TYPE partnumberlist IS TABLE OF emp.empName%TYPE;
The error points the partnumberlist as invalid datatype in TOAD because of this i'm unable to compile the package.
Any suggestion
Thanks and regards
Sathish Gopal

Here is my code for
package Spec
CREATE OR REPLACE PACKAGE "HISTORICAL_COMMENTZ" AS
TYPE prior_part_data_record IS RECORD (
prior_part_row_id PGM_RPLCMNT_PART.PR_PART_ROW_S_ID%TYPE,
prior_pgm_chng_s_id PGM_RPLCMNT_PART.PR_PGM_CHNG_S_ID%TYPE
TYPE parts_list IS TABLE OF prior_part_data_record;
--TYPE parts_list IS TABLE OF NUMBER;
TYPE partnumberlist IS TABLE OF PGM_RPLCMNT_PART.PR_PART_ROW_S_ID%TYPE;
TYPE partnumber_cursor IS REF CURSOR;
TYPE comment_record IS RECORD (
pgm_s_id                     PGM_PART_CMNT.PGM_S_ID%TYPE,
part_row_s_id                PGM_PART_CMNT.PART_ROW_S_ID%TYPE,
pgm_chng_s_id                PGM_PART_CMNT.PGM_CHNG_S_ID%TYPE,
cmnt_txt                     PGM_PART_CMNT.CMNT_TXT%TYPE,
cmnt_dt                     PGM_PART_CMNT.CMNT_DT%TYPE,
updt_rsrc_id                PGM_PART_CMNT.UPDT_RSRC_ID%TYPE
TYPE comment_list IS TABLE OF comment_record;
global_pgm_s_id INTEGER := 0;
global_part_row_s_id INTEGER := 0;
err_num NUMBER := 999999;
err_msg VARCHAR2 (250);
PROCEDURE getComments (
pgm_s_id IN NUMBER,
part_row_s_id IN NUMBER,
partnumber_cursorlist out partnumber_cursor);
END;
Package Body
CREATE OR REPLACE PACKAGE BODY HISTORICAL_COMMENTZ
AS
FUNCTION getPriorPart
(param_prior_pgm_chng_s_id IN PGM_RPLCMNT_PART.PR_PGM_CHNG_S_ID%TYPE,
return_prior_part_data_record IN OUT prior_part_data_record
RETURN INTEGER
IS
retVal INTEGER;
prior_part_row_id INTEGER;
prior_pgm_chng_s_id INTEGER;
local_prior_part_data_record prior_part_data_record;
BEGIN
SELECT PR_PART_ROW_S_ID AS prior_part_row_id, PR_PGM_CHNG_S_ID AS prior_pgm_chng_s_id
INTO local_prior_part_data_record
--SELECT PR_PART_ROW_S_ID INTO retVal
FROM PGM_RPLCMNT_PART
WHERE PGM_S_ID = global_pgm_s_id AND CUR_PGM_CHNG_S_ID = param_prior_pgm_chng_s_id;
return_prior_part_data_record := local_prior_part_data_record;
retVal := 0;
RETURN retVal;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
retVal := -1;
RETURN retVal;
WHEN OTHERS
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
retVal := -1;
RETURN retVal;
END getPriorPart;
FUNCTION getComment (found_parts_list IN parts_list, comments OUT comment_list)
RETURN INTEGER
IS
CURSOR init_cursor
IS
SELECT PGM_S_ID,PART_ROW_S_ID,PGM_CHNG_S_ID,CMNT_TXT,CMNT_DT,UPDT_RSRC_ID
FROM PGM_PART_CMNT WHERE 1 = 2;
retVal INTEGER;
indexNum PLS_INTEGER;
local_part_record prior_part_data_record;
local_comment_record comment_record;
local_part_row_s_id NUMBER;
i PLS_INTEGER;
BEGIN
OPEN init_cursor;
FETCH init_cursor
BULK COLLECT INTO comments;
i := 0;
indexNum := found_parts_list.FIRST;
WHILE indexNum IS NOT NULL
LOOP
local_part_record := found_parts_list(indexnum);
local_part_row_s_id := local_part_record.prior_part_row_id;
SELECT PGM_S_ID,PART_ROW_S_ID,PGM_CHNG_S_ID,CMNT_TXT,CMNT_DT,UPDT_RSRC_ID
INTO local_comment_record FROM PGM_PART_CMNT
WHERE PGM_S_ID = global_pgm_s_id
AND PART_ROW_S_ID = local_part_row_s_id;
comments(i) := local_comment_record;
i := i + 1;
END LOOP;
RETURN retval;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
RETURN retval;
WHEN OTHERS
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
RETURN retval;
END getComment;
PROCEDURE getComments
pgm_s_id IN NUMBER,
part_row_s_id IN NUMBER,
partnumber_cursorlist OUT partnumber_cursor)
IS
comment_recordlist comment_record;
retPartnumberlist partnumberlist;
found_parts_list parts_list;
local_part_record prior_part_data_record;
is_more_parts BOOLEAN;
driver_chng_s_id NUMBER;
num_parts NUMBER;
retVal NUMBER;
comments comment_list;
returnPartnumberlist partnumberlist;
iloopCounter PLS_INTEGER;
inx1 PLS_INTEGER;
part_t partnumberlist :=partnumberlist(100,200,300);
CURSOR part_list_init_cursor
IS
SELECT PR_PART_ROW_S_ID,PR_PGM_CHNG_S_ID FROM PGM_RPLCMNT_PART WHERE 1 = 2;
CURSOR inIt_cursor
IS
SELECT 0 FROM DUAL WHERE 1 = 2;
BEGIN
DBMS_OUTPUT.ENABLE (5000000);
global_pgm_s_id := pgm_s_id;
global_part_row_s_id := part_row_s_id;
SELECT PART_ROW_S_ID AS prior_part_row_id, PR_PGM_CHNG_S_ID AS prior_pgm_chng_s_id
INTO local_part_record
FROM PGM_RPLCMNT_PART
WHERE PGM_S_ID = global_pgm_s_id AND PART_ROW_S_ID = global_part_row_s_id AND
CUR_PGM_CHNG_S_ID IN (SELECT MAX(CUR_PGM_CHNG_S_ID) FROM PGM_RPLCMNT_PART WHERE
PGM_S_ID = global_pgm_s_id AND PART_ROW_S_ID = global_part_row_s_id
GROUP BY PART_ROW_S_ID);
OPEN part_list_init_cursor;
FETCH part_list_init_cursor
BULK COLLECT INTO found_parts_list;
-- Add the existing part to the found list
found_parts_list.EXTEND;
found_parts_list(1) := local_part_record;
driver_chng_s_id := local_part_record.prior_pgm_chng_s_id;
num_parts := 1;
is_more_parts := TRUE;
WHILE (is_more_parts) LOOP
retVal := getPriorPart(driver_chng_s_id,local_part_record);
IF (retVal != -1) THEN
found_parts_list.EXTEND;
num_parts := num_parts + 1;
found_parts_list(num_parts) := local_part_record;
driver_chng_s_id := local_part_record.prior_pgm_chng_s_id;
ELSE
is_more_parts := FALSE;
END IF;
END LOOP;
--num_parts := getComment(found_parts_list,comments);
OPEN init_cursor;
FETCH init_cursor
BULK COLLECT INTO returnPartnumberlist;
num_parts := found_parts_list.COUNT;
FOR iloopCounter IN 1 .. num_parts
LOOP
returnPartnumberlist.EXTEND;
returnPartnumberlist(iloopCounter) := found_parts_list(iloopCounter).prior_part_row_id;
END LOOP;
retPartnumberlist := returnPartnumberlist;
open
*          partnumber_cursorlist for select PR_PART_ROW_S_ID from TABLE(CAST(retPartnumberlist AS historical_commentz.partnumberlist));*
DBMS_OUTPUT.put_line('Done....!');
EXCEPTION
some code..............................
END getComments;
END HISTORICAL_COMMENTZ;
/

Error while using P2V in Oracle VM 2.2 version

Error while using P2V in Oracle VM 2.2 version
I tried using this option by using the steps given on one link but it didnt worked...
Error:
code 404, message No permission to list directory.
I ve tried giving full permissions on for /OVS on Server but invain.
Can U pls help me...
Thanks in advance.
Edited by: user10310678 on Sep 16, 2009 3:32 AM

user10310678 wrote:
I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
 </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
 <connection-properties>
 <properties>
 <property>
 <name>xADataSourceName</name>
 <value>jdbc/SOADataSource</value>
 </property>
 <property>
 <name>dataSourceName</name>
 <value></value>
 </property>
 <property>
 <name>platformClassName</name>
 <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
 </property>
 </properties>
 </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Error while installing J2EE Add- In to the ABAP system

Error while installing J2EE Add-In to the ABAP system
We are installing J2EE Add-In to the ECC5 System in the new hardware.
When are getting Error while installing J2EE Add-In to the ABAP system.
Transaction Begin*****************************
ERROR 2005-08-10 14:58:28
CJSlibModule::writeLogEntry()
CJS-20011 J2EE engine configuration error. DIAGNOSIS: Error when
configuring J2EE Engine. See output of
logfile /usr/sap/QSS/install/batchconfig.log: 'My Library Path
is: /usr/j2se/jre/lib/sparcv9/server:/usr/j2se/jre/lib/sparcv9:/usr/j2se/jre/../lib/sparcv9:/tmp/sapinst_exe.13084.1123702275:/usr/lib::/usr/openwin/lib:/usr/sap/QSS/SYS/exe/run:/oracle/QSS/920_64/lib:/oracle/QSS/920_64/lib32:/usr/lib
ElementInfoTask has finished successfully on dispatcher
ConsoleLogsTask has finished successfully on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on dispatcher
ElementInfoTask has finished successfully on server
ConsoleLogsTask has finished successfully on server
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on server
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on server
ChangeServicePropsTask has finished successfully. Service: dbpool on
server
ChangePasswordsTask finished successfully.
Error occured while connecting to database (UploadFile). Msg: No such
algorithm: DESede
Transaction end***********************************
We tried twice clean installation, after removing j2ee dir, SCS and
resp profiles and droping PSAPQSSDB tablespace and SAPQSSDB user.
I have also confirmed the passwords in ABAP system/000 for SAPJSF, DDIC, J2EE_ADMIN, J2EE_GUEST.
We are getting the same error in both tries.
Kindly advice us to resolve the problem.
Thanks and Regards,
Srinivas

Ananda,
you saved my day! I've been banging my head against the wall with this same problem during a J2EE add-in installation for SRM 4.0 on Windows, in preparation of an LAC 2.0 installation. I had tried deleting the schema first, but that didn't work. After I removed the sys\global\security folder as well, it worked perfectly.
Thank you.

Object reference error while using DM add-in in excel

Similar Messages

Maybe you are looking for