OBJECTS_NOT_CHARLIKE error by establishing BPM functionality in SOLMAN

Hello!
I am about to activate Business Process Monitoring functionality in SAP Solution Manager. The error is a dump:
OBJECTS_NOT_CHARLIKE
Error in the ABAP Application Program
The current ABAP program "SAPLDSWP_BPM_FUNC" had to be terminated because it has come across a statement that unfortunately cannot be executed.
Error analysis
At the statement "REPLACE" only character-type data objects are supported at the argument position "MSGV3".
In this particular case, the operand "MSGV3" has the non-charcter-type type
"I".
Can some one help me with this issue?
Thank you very much!
regards
Thom

This is 5-year old. You should open a new thread (you can always refer to this post). When you find a solution please make sure it is in the post so that someone 5 years from now will not have to re-open your thread.

Similar Messages

Runtime constant (Filename) errors out in BPM

Hi,
I have a BPMCollectTime scenario to collect the Source files. The filename (Message Mapping/Transformation) from the files is captured in TRANSFORM STEP(before sending them out from BPM). The file is sent to SEND step one at a time.
Question : Filename of the source file is captured through user defined function.
Following is the code.
================
String v_result_time; //test Variable
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
if (key == null) { v_result_time= "Create Key Failed";}
else
{v_result_time= "Create Key worked";
String valueOld = conf.get(key);
v_result_time = valueOld;
return v_result_time;
The Mapping gives a runtime error in the BPM. This is a sporadic error.
I have selected the Adapter specific attribute(File name).
The BPM errors out sometimes? I am not sure if I am missing any setting. If I delete the work item and run the same scenario it works.
Question 1 : What is the cause of the above error?
Question 2 : Does BPM support Adapter specific attribute such as filename?
Kindly Advice.
Thanks,
Gowri

Hi Everyone,
Thanks for all the help.
DTN will not change the response filename to source filename. This option cannot be used. The correlation id is defined as response file name. Response filename is fixed for invoice file.
Here is the example.
For invoice file name HDTN20070430163110.TXT, response file received is nav1_2b5.rsp file. For HDTN20070430163314.TXT , response file is nav1_2b5.rsp
So my correlation id is dummy fixed value. I have known the fact that it is not possible to use context object filename.
Bhavesh - I have defined transform step for accessing filename using dynamic configuration. Following is the code used in mapping.
================
String v_result_time; //test Variable
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
if (key == null) { v_result_time= "Create Key Failed";}
else
{v_result_time= "Create Key worked";
String valueOld = conf.get(key);
v_result_time = valueOld;
return v_result_time;
====================================
BPM errors out sometime with following error
Component mapping has returned error.
com/sap/xi/tf/_MM_DTNData_2_DTNFilename_java.lang.NullpointerException.
Error: Exception CX_MERGE_SPLIT occurred (program: CL_MERGE_SPLIT_SERVICE========CP, include: CL_
If I delete this workitem and repeat the same scenario, it works. I have still not understood, why the scenario works sometime.
Kindly Advice.
Thanks,
Gowri

Error in running a function to convert coordinates in degrees to decimal for EXCEL VBA

For your information, I have 3 cross-posts regarding this question - and all I can said there is still no firm solution regarding this error.
1) http://stackoverflow.com/questions/27634586/error-in-running-a-function-to-convert-coordinates-in-degrees-to-decimal-for-exc/27637367#27637367
2) http://www.mrexcel.com/forum/excel-questions/826099-error-running-function-convert-coordinates-degrees-decimal-excel-visual-basic-applications.html#post4030377
3) http://www.excelguru.ca/forums/showthread.php?3909-Error-in-running-a-function-to-convert-coordinates-in-degrees-to-decimal-for-EXCEL-VB&p=16507#post16507
and the story of the error is as below:
Currently I am working on VBA excel to create a widget to verify coordinates whether it lies under the radius of ANOTHER predefined and pre-specified sets of coordinates.
In the module, I want to convert the coordinates from degrees to decimal before doing the calculation - as the formula of the calculation only allow the decimal form of coordinates.
However, each and every time I want to run the macros this error (Run-time error '5', invalid procedure call or argument) will appear. Then, the debug button will bring me to below line of coding:
degrees = Val(Left(Degree_Deg, InStr(1, Degree_Deg, "°") - 1))
For your information, the full function is as below:
Function Convert_Decimal(Degree_Deg As String) As Double
'source: http://support.microsoft.com/kb/213449
Dim degrees As Double
Dim minutes As Double
Dim seconds As Double
Degree_Deg = Replace(Degree_Deg, "~", "°")
degrees = Val(Left(Degree_Deg, InStr(1, Degree_Deg, "°") - 1))
minutes = Val(Mid(Degree_Deg, InStr(1, Degree_Deg, "°") + 2, _
InStr(1, Degree_Deg, "'") - InStr(1, Degree_Deg, "°") - 2)) / 60
seconds = Val(Mid(Degree_Deg, InStr(1, Degree_Deg, "'") + _
2, Len(Degree_Deg) - InStr(1, Degree_Deg, "'") - 2)) / 3600
Convert_Decimal = degrees + minutes + seconds
End Function
Thank you.
Your kind assistance and attention in this matter are highly appreciated.
Regards,
Nina.

You didn't give an example of your input string but try the following
Sub test()
Dim s As String
s = "180° 30' 30.5""""" ' double quote for seconds
Debug.Print Deg2Dec(s) ' 180.508472222222
End Sub
Function Deg2Dec(sAngle As String) As Double
Dim mid1 As Long
Dim mid2 As Long
Dim degrees As Long
Dim minutes As Long
Dim seconds As Double ' or Long if only integer seconds
sAngle = Replace(sAngle, " ", "")
mid1 = InStr(sAngle, "°")
mid2 = InStr(sAngle, "'")
degrees = CLng(Left$(sAngle, mid1 - 1))
minutes = CLng(Mid$(sAngle, mid1 + 1, mid2 - mid1 - 1))
seconds = Val(Mid$(sAngle, mid2 + 1, 10)) ' change 10 to 2 if only integer seconds
Deg2Dec = degrees + minutes / 60 + seconds / 3600
End Function
As written the function assumes values for each of deg/min/sec are included with unit indicators as given. Adapt for your needs.
In passing, for any work with trig functions you will probably need to convert the degrees to radians.

SSRS countrow Aggregate error(Aggregate and lookup functions cannot be used in query parameter expressions.)

Below expression works fine with text box but gives error in dataset expression.
="SET FMTONLY OFF select "+ join(Parameters!Column.Value,",") +" FROM pamcustom.dbo.vw_HFL_HFD_HotfileData INNER JOIN pamcustom.dbo.HFL_HFB_HotFileBatch on BatchID = HFB_intBatchID where BatchID ="+Parameters!BatchId.Value+"
and "+Parameters!cmbTranType.Value+" "+ iif(CountRows("DS_Aml_Mnr_Iss_Desc")=Parameters!Mnr_Iss_Desc.count," "," and aml_mnr_iss_desc in "+"('" & join(Parameters!Mnr_Iss_Desc.Value,"','")
& "')")+iif(CountRows("ds_ReportingCategory")=Parameters!ReportingCategory.count," "," and ReportingCategory in "+"('" & join(Parameters!ReportingCategory.Value,"','") & "')")+iif(CountRows("ds_NAICSubGroup")=Parameters!NAICSubGroup.count,"
"," and naicsubgroup in "+"('" & join(Parameters!NAICSubGroup.Value,"','") & "')")+iif(CountRows("ds_PortTrading")=Parameters!PortTrading.count," "," and porttrading in "+"('"
& join(Parameters!PortTrading.Value,"','") & "')")+iif(CountRows("ds_GL_LE")=Parameters!GL_LE.count," "," and gl_le in "+"('" & join(Parameters!GL_LE.Value,"','") &
"')")+iif(CountRows("ds_coagroup")=Parameters!cmbCoaGrp.count," "," and coagroup in "+"('" & join(Parameters!cmbCoaGrp.Value,"','") & "')")+iif(CountRows("Portfolio")=Parameters!cmbPort.count,"
"," and portfolio in "+"('" & join(Parameters!cmbPort.Value,"','") & "')")+IIf(IsNothing(Parameters!txtSecID.Value)," "," and secid in ('"+Replace(Parameters!txtSecID.Value,",","','")+"')")+iif(IsNothing(Parameters!minPortFilter.Value)
and IsNothing(Parameters!MinPort.Value)," "," and portfolio "+Parameters!minPortFilter.Value+Parameters!MinPort.Value)+iif(IsNothing(Parameters!maxPortFilter.Value) and IsNothing(Parameters!MaxPort.Value)," ","
and portfolio "+Parameters!maxPortFilter.Value+Parameters!MaxPort.Value)+iif(IsNothing(Parameters!minCoaFilter.Value) and IsNothing(Parameters!txtMinCoa.Value)," "," and portfolio "+Parameters!minCoaFilter.Value+Parameters!txtMinCoa.Value)+iif(IsNothing(Parameters!maxCoaFilter.Value)
and IsNothing(Parameters!txtMaxCoa.Value)," "," and portfolio "+Parameters!maxCoaFilter.Value+Parameters!txtMaxCoa.Value)
I guess the error " Aggregate and lookup functions cannot be used in query parameter expressions." is because I am using CountRow to ensure that if all values of multi select all selected i will not use that filter in where clause.
Pls. guide...

Hi, Include your parameter total count in the dataset for parameter and instead of using countrows() function use the count from dataset in the expression.
Hope this helps.........
Ione

Error While uploading the Function and Function_BP

Hello,
I am getting the following error while uploading the Functions and Funtions_BP using the Rule Upload functions.
com.virsa.cc.comp.Function_upload.onActionUploadFunc(Function_upload.java:302) com.virsa.cc.comp.wdp.InternalFunction_upload.wdInvokeEventHandler(InternalFunction_upload.java:150) com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) javax.servlet.http.HttpServlet.service(HttpServlet.java:760) javax.servlet.http.HttpServlet.service(HttpServlet.java:853) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) java.security.AccessController.doPrivileged(Native Method) com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
The files which i am uploading the file from the Best practises only.
What is the reason for this error?
Did any one get this error?
Regards,
Kumar Rayudu
Edited by: Kumar Rayudu on Aug 4, 2009 12:32 PM

Hello Kumar,
Have you uploaded the SAP text and object files? Upload them first and then try to upload functions.
Harleen
SAP GRC RIG

Error while activating the function module

hi,
am getting error while activating the function module i.e. program or report statement is missing.
thank you in advance
karthik

hii vinu,
hi there....
make sure that the Processing type in Attributes tab is 'Normal function module'. Also chk the general data, it must be having some name in the Program Name and include name column.try checking the program names in se38, if the program is of type include or not. you can also chk by writting a program call the function module and test it
I hope this will solve the query. in my case, SAPLZ123 is the program name and LZ123U28 is the include name.
or
Its common prob with Function module.
Goto SE80->Give Function group name->Right click on it->Activate.
regards,
Shweta

Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed

Dear All,
I am working on BPM 11g.
I installed the following products for BPM 11g
OS: Windows 7 SP1 Professional Edition all with 32 bit
Installed s/w:
    JDeveloper 11.1.1.6.0 Generic Version
    OracleXE 11.2 Win32
    ofm soa generic 11.1.1.6.0
    wls 10.3.5
    RCU 11.1.1.6 for schemas dev_soainfra, dev_sdpm and dev_mds - Utility run successfully.
Overall Installation is successful wth no issues.
Configuration of Weblogic server for domain is ok with admin server, soa_server1 and bam_server1 with test connections is ok.
I am using browser as Internet Explorer 9
In Jdeveloper 11.1.1.6.0 after creating application, project and process
From BPM MDS Navigator I configured the connection for Database 11g XE as well using
Override Application Server user/password
For SOA MDS I included the dev_mds user with MDS partition as obpm
tested connections all ok (weblogic and soa_server1 up and running)
In Jdeveloper I am able to export the BPM successfully.
In the BPM Project Navigator when I use the Project --> SalesQuote.jpr --> right clicking with
option as Save to BPM MDS the following error is occured as
"Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed".
If the error is resolved than I can see the project in BPM composer.
My queries on this error are
1) Has soa_server anything to do with this error
2) Is dev_mds schema to be reviewed
what can be the possibility to resolve the BPM-70801 error.
Please provide the solution ASAP or send me the reply to my [email protected]
Regards
Ajaz Ahmed

Hello Ajaz,
BPM-70801 is a very generic error that can have multiple causes. Please provide the error log from servers log file. From what I understand, you are using a separate soa_server1, so watch out /your_domain/servers/soa_server1/logs/soa_server1.log
Regards
km

Error while executing planning Function

Hi All,
I'm getting some error while executing planning function. Below are errors. Please check and provide solution.
Errors occurred when executing planning function RTFMPF01/RTFMPG01
Value 08 of chara Region does not correspond to the attrib.val MI of chara Store
Value 10 of chara Region does not correspond to the attrib.val RM of chara Store
Value 11 of chara Region does not correspond to the attrib.val NA of chara Store
Thanks,
Vamsi

Hi,
Value 08 of chara Region does not correspond to the attrib.val MI of chara Store
Looks like there is a characteristics relationship which derives the attribute store from Region.
Check the master data for Region for attribute Store and the corresponding values.
The values that are maintained in the master data will only be allowed to enter in the cube.
Thanks
pratyush

Error while using Evaluate function

Hi ,
I am using the following expression in the criteria tab in order to get first value for every customer order by date:
EVALUATE('FIRST_VALUE(%1) OVER (PARTITION BY %2 ORDER BY %3)' AS INTEGER, "Fact - Customer SubLedger"."TRANSACTION AMOUNT",Customer.CUST_ACCOUNT_NUMBER,"GL Date".DAY).
When I try to execute the report it throws following error :
*[nQSError: 42015] Cannot function ship the following expression: Evaluate( FIRST_VALUE(%1) OVER (PARTITION BY %2 ORDER BY %3),D1.c4, D1.c2, D1.c13)*
Can anybody help me with this? Where am i going wrong?
Regards,
Vikas

Hi Kishore,
I am using the exactly same formula which you have mentioned here still it is giving me the same error.
EVALUATE('First_value(%1) over (partition by %2 order by %3)' AS DOUBLE , "Fact - Customer SubLedger"."OPENING BALANCE",Customer.CUST_ACCOUNT_NUMBER, "GL Date".DAY)
Error : *[nQSError: 42015] Cannot function ship the following expression: Evaluate( First_value(%1) over (partition by %2 order by %3),D909.c9, D909.c3, D909.c14)*
Can't say why it is behaving like this.
Anyways thanks all of you for your help.
May be I am going wrong somewhere else.I will try to solve this issue by myself.
Once again thanks to all of you.
Regards,
Vikas

Error -Call to undefined function: ocilogon() ( Php4.4+ Apache2.2 +Windows)

1) Configured Php4.4 to have oci8 enabled with Apache2.2 on Windows 2000 ( service pack4). No error at the time of Apache start but when trying to connect to Oracle using Oracle Instant Client below error is thrown..
"Fatal error: Call to undefined function: ocilogon() in C:\Apache2 \htdocs\star\dbconnect.php on line 7"
Configuration steps..
1) Uncommented "extension=php_oci8.dll" in php.ini to enable oci API's.
2)Configured Oracle Instant client by adding path to Windows path variable as per it documentation.
3)Copied all Php4.4 dlls( oci..etc) into the directory pointed by "PHPIniDir", which is configured in httpd.conf
If i run phpinfo(), i dont see oci8 enabled in the output. I guess there is problem in the configuration? Any insights into the error is greatly appreciated..
BTW, I did same configuartion on Windows XP and is working fine..

Also, I dont see path value for path variable in phpinfo() ouput for Oracle Instant Client, which i updated in Windows?
Below is the snippet of ouput from phpinfo().
Apache Environment
Variable Value
HTTP_ACCEPT image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/x-shockwave-flash, */*
HTTP_ACCEPT_LANGUAGE en-us
HTTP_ACCEPT_ENCODING gzip, deflate
HTTP_USER_AGENT Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.0)
HTTP_HOST localhost
HTTP_CONNECTION Keep-Alive
PATH D:\CESi\isis\bin;D:\CESi\Gateway\mico-win32-bin\;D:\CESi\Gateway\;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Support Tools\
SystemRoot C:\WINNT
COMSPEC C:\WINNT\system32\cmd.exe
PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
WINDIR C:\WINNT
SERVER_SIGNATURE <address>Apache/2.0.59 (Win32) PHP/4.4.4 Server at localhost Port 80</address>
SERVER_SOFTWARE Apache/2.0.59 (Win32) PHP/4.4.4
SERVER_NAME localhost
SERVER_ADDR 127.0.0.1
SERVER_PORT 80
REMOTE_ADDR 127.0.0.1
DOCUMENT_ROOT C:/Apache2/htdocs
SERVER_ADMIN [email protected]
SCRIPT_FILENAME C:/Apache2/htdocs/info.php
REMOTE_PORT 4977
GATEWAY_INTERFACE CGI/1.1
SERVER_PROTOCOL HTTP/1.1
REQUEST_METHOD GET
QUERY_STRING no value
REQUEST_URI /info.php
SCRIPT_NAME /info.php
Environment
Variable Value
ALLUSERSPROFILE C:\Documents and Settings\All Users
CMM_CELL CSTAR_STAR
CommonProgramFiles C:\Program Files\Common Files
COMPUTERNAME STAR-SM-NR-PROD
ComSpec C:\WINNT\system32\cmd.exe
NUMBER_OF_PROCESSORS 2
OS Windows_NT
Os2LibPath C:\WINNT\system32\os2\dll;
Path D:\CESi\isis\bin;D:\CESi\Gateway\mico-win32-bin\;D:\CESi\Gateway\;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Program Files\Support Tools\
PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE x86
PROCESSOR_IDENTIFIER x86 Family 6 Model 11 Stepping 1, GenuineIntel
PROCESSOR_LEVEL 6
PROCESSOR_REVISION 0b01
ProgramFiles C:\Program Files
SMS_LOCAL_DIR C:\WINNT
SystemDrive C:
SystemRoot C:\WINNT
TEMP C:\WINNT\TEMP
TMP C:\WINNT\TEMP
USERPROFILE C:\Documents and Settings\xwback
windir C:\WINNT
AP_PARENT_PID 884

Raise error in an external-function of XSLT-mapping (ABAP)

Hi,
we implemented a xslt-mapping (ABAP) in PI with external-functions.
It's a great feature and works fine.
Now, we have to implement an error handling:
The external-functions are reading data from an abap table. We have to stop the mapping (if a value in the table is missing).
We wanna show an error inside the PI-Monitoring (red flag) with a valid error text.
How can I raise an error inside an external-function?
regards
Wolfgang Hummel

Hi Michal,
thanks a lot for your answer.
Can I set dynamic configuration inside an external funktion of an ABAP-XSLT?
I added the CX_MAPPING_FAULT-Exception to my external-function method and raised an exception inside my external-funktion ... and I got an "UNCAUGHT_EXCEPTION" inside my mapping - bad
regards
Wolfgang

Error Handling in BPM - Send Step

Hello,
I would like to implement the following two error handlers using BPM:
1. There is a send step which sends a message to an HTTP receiver. If the HTTP server is down I would like to add 3 retries and just in case after the third retry fails there should be an error Email sent. So I am wondering whether a communication error (which happens in the HTTP receiver communication channel) is delivered back to the process engine so that it can be handled using BPM.
2. I also need to apply a validation using XML schema. So if validation fails the error should also be returned to the process engine so that it can be handled in the integration process.
Are those two requirement possible as described (returning communication and validation errors)? Or do I have to follow another approach?
Thank you very much!

Hi Florian,
>>2. When I activate transport acknowledgement and there is an error in XML validation outbound channel request I get an system error acknowledgement back however the error branch is NOT taken either!
Correct send step using transport acknowledgment will check whether the message was transmitted or not
Check this link http://help.sap.com/saphelp_nw04s/helpdata/EN/43/65ce41ae343e2be10000000a1553f6/content.htm
>>3. And NOW it gets interesting: When I simulate step 2 again an cancel the error message afterwards then the error branch is taken! Not very useful in my opinion if error messages have to be canceled first. The error branch seems to be pretty useless for me in case of asynchronous send steps.
Again when you cancelled the message it was not received successfully by the receiver system and hence it raised exception (as mentioned in the Exception of send step.)
I will suggest you to try using Application Acknowledgment in send step. Also If you provide the steps of BPM then it will be more helpful.
Also have a look at this :
Asynchronous send step can raise exception only when
1. Thrown when a permanent system error occurs:
a. In the case of an asynchronous send step, the exception will only be triggered if an error occurs during the transfer to the pipeline. Errors that occur during mapping in the pipeline, do not trigger an exception.
b . In the case of a synchronous send step, the exception is also triggered by permanent system errors that occur in the pipeline or while transporting the message to or from the pipeline.
Regards
Suraj
Edited by: S.R.Suraj on Sep 8, 2009 6:41 AM

Error calling pl/sql function in target column

Hi guys,
I get this error when calling my function in ODI:
Caused By: java.sql.SQLSyntaxErrorException: ORA-00904: "mySchema"."GET_ODI_DEFAULT_VALUE(1)": ongeldige ID --> 1 is an IN parameter
while in sql developer I get a good result with following query:
select mySchema.get_odi_default_value(1) from dual;
In my target table for the primary key I call a sequence from mySchema and this works fine.
I've tried the following synxtax in the mapping of my target column:
- <%=odiRef.getObjectName( "L","GET_ODI_DEFAULT_VALUE(1)", "D" )%>
- <%=odiRef.getObjectName( "L","GET_ODI_DEFAULT_VALUE", "D" )(1)%>
Thanks for you advice

iadgroe wrote:
how to bring oracle function into ODI
I thought for objects like sequences and functions you had to use 'odiRef.getObjectName' to get access to them.
Am I wrong because now I'm a little confused???Hi,
Best practices would be to use getobjectname method as this way your not hardcoding anything into the interface and you are referencing the logical object only, which means you can change the logical object later and not have to worry about changing the interfaces.

I can't search a song or an artist. i get an error R6025/pure virtual function call. then itunes stops working. PLEASE HELP

I can't search a song or an artist without getting an error R6025 - pure virtual function call. Then itunes stops working. How do I fix it? PLEASE HELP

I have had numerous issues with Itunes 64 bit 11.1.38 (and other previous versions) locking up and crashing upon start with "Itunes has stopped working" or "R6027 pure virtual function call". I have researched the answers around the forums as well as having tried some extensive and repetitious troubleshooting myself and thought I'd list them here... in order of troubleshooting...
1. Install all Windows updates and reboot. This seems to clear issues from time-to-time... I suspect Itunes expects the latest-and-greatest as far as Windows is concerned.. see if this clears your issue.
2. Uninstall all Itunes and Apple products & reboot, remove their directories, remove lingering Itunes registry entries, reboot again, reinstall using "RUN AS ADMINISTRATOR" to install the Itunes executable. See if this allows Itunes to stabilize. Pelase be sure to use the following guide from Apple as far as removing the apps and directories are concerned...
http://support.apple.com/kb/ht1923
3. Remove the contents of the "iphone photo cache" (or other related product photo cache) directory.
4. Try editing the shortcut properties and configure the shortcut (for all users) to run as Administrator.
5. Try editing the shortcut and configure it to run in Compatibility Mode for Windows 7 (for all users).
6. a.Try using MSCONFIG to locate a potential conflicting application or service using the following...
http://support.apple.com/kb/ht2292
or
6. b. Remove the last recent software application(s) you may have installed... in my case removing GREENSHOT http://getgreenshot.org/ stopped my Itunes from crashing on startup and it stabilized after
driving my nuts for weeks.
Message was edited by: DaCheeze

Fatal error: Call to undefined function oci_connect()

I get below error when I try to connect to oracle in PHP on SUSE 10. I orginally posted this question in PHP forum but I was advised to post it to Linux forum. so here is the error and other details.
Fatal error: Call to undefined function oci_connect()
I followed one of the documentation realed to this error and I get below error.
/home/knaik # php -version
PHP 5.2.5 with Suhosin-Patch 0.9.6.2 (cli) (built: Apr 23 2008 23:35:28)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies
/home/knaik/oci8-1.3.5 # phpize
Configuring for:
PHP Api Version: 20041225
Zend Module Api No: 20060613
Zend Extension Api No: 220060519
Cannot find autoconf. Please check your autoconf installation and the $PHP_AUTOCONF
environment variable is set correctly and then rerun this script.
I was looking into below link. But I could not find oci8.so file after the OCI build.
http://www.orware.net/tips-and-how-tos/plesk/46-oracle-oci8-php-installation.html
===================================================
===> In reply to my request *"mgogala's"* reply was as below.
Install autoconf using yast. Check whether the package is installed by using:
$>rpm -qa autoconf
autoconf-2.59-5
BTW, this is not a Linux forum. There is one on OTN, I'm sure that Frits Hoogland will gladly help you out.
====>
I am not able to find "autoconf" rpm for Suse 10.
Below is the exact version details of the O/S.
#*more SuSE-release*
SUSE Linux Enterprise Server 10 (i586)
VERSION = 10
PATCHLEVEL = 2
#*uname -a*
Linux osdvglobalopsdv02 2.6.16.60-0.21-smp #1 SMP Tue May 6 12:41:02 UTC 2008 i686 i686 i386 GNU/Linux
Please let me know, from where can I download this RPM?
Thanks
Shelly

btw, this is the oracle enterprise linux forum, the forum specific for oracle's linux distro, there is a general linux forum here: Generic Linux

OBJECTS_NOT_CHARLIKE error by establishing BPM functionality in SOLMAN

Similar Messages

Maybe you are looking for