Obtain Job invoker for a SSIS job scheduled in SQL Server Agent

Hello,
I was required to tell the job runner of a particular SSIS job scheduled in SQL Server Agent (in SQL Server Management Studio 2008 R2). I noticed that after running the job, a record can be found in msdb.dbo.sysjobhistory in the [message] columm saying that
the job is invoked by 'Domain\User'. Is there anyway I can acquire and upload that information into an audit table by adding some additional script into the job? I heard about using token to get job_ID, but what about the actual user name who runs
the job?
Thanks

Just add retry attempts to whatever number you want (2 as per your original explanation) in Job step properties as below
Have a logic to include a delay of 10 mins . You can make use of WAITFOR function for that
see
http://www.mssqltips.com/sqlservertip/1423/create-delays-in-sql-server-processes-to-mimic-user-input/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Similar Messages

HOw to avoid DeadLocks when you schedule a Sql Server Agent Job and calling SSIS packages

Hi All,
I have scheduled 2 packages in in Sql Server Agent jobs .
First job which is having Package 1 executing at 11 AM and where I am inserting the data in the table.
Second job which is having Package 2 executing at 12 AM and where I am updating the data in the table based on the first job inserted records.
When I am executing my first job it taking more time and executing till 12 AM and from 12 AM my job 2 also starting ,so getting deadlocks conflicts because inserting happening from job1 and updating happening from Job 2.
How to avoid deadlocks and fix the issue.
Please Suggest .
Thanks & Regards,
Anand

Hi Anand,
Here is another solution, you can set the Job 2 not to run based on a schedule, and create another SQL Server Agent Job which starts at 12 AM and run with a specified time interval to execute a SQL statement in which you do the following steps:
1. Get the status information of Job 1 using the statement:
DECLARE @i int;
EXEC @i = msdb.dbo.sp_help_job @job_name = ‘Job Name'
2. If the value of @i is 1 which means the status of job 1 is success and current time is, then start the job 2. So, the statement is as follows:
IF @I = 1
EXEC msdb.dbo.sp_start_job @job_name= ‘Job Name’
Regards,
Mike Yin
TechNet Community Support

SSIS package fails under SQL Server Agent job

Hi All
I have designed a SSIS package to encrypt a file using Cipher (EFS) it works fine from BIDS & Package Execution Utility.
But SQL Server Agent job is failing to do this. I am getting the error as
" In executing C:\Windows\System32\Cipher.exe /e /a C:\Test.txt at "",The Process Exit code was 1 while the expected was 0."
Please help me.
Thanks

Two things that usually come to mind when this happens from BIDS locally to the SQL Agent are
1. Security is not
adequate under the SQL Agent Service Account
Rule the security problem out by setting up a proxy account that you know ahs security to run the needed tasks in the package. Either that or give the service account the permissions needed.
2. 32bit BIDS development and running under a 64bit Platform in your SSIS installation
This can be fixed by selecting run in 32bit more or running the package with the 32bit installed version of DTEXEC found in the Program Files (x86) folder where you installed tools.
Next, setup logging in the package so you get a more detailed error message. Event handlers on the tasks will be much more detailed using the OnError event. you can write that to either a flat file with a data flow in the event handler or simply
insert the event into a table using the ? as the parms. If you need assistance setting that up, here are basic steps for a SQL Server table
1) Select the task and click the event handler tab in BIDS
2) Select OnError event handler in the list
3) Click the enable link and drag a Execute TSQL Task over to the window
4) Create a table in your SQL Server database (create one so you don't litter your user DBs if needed)
5) Open the task and add the connection as needed. Then add this statement
INSERT INTO dbo.TableYouCreated
(PackageName, SourceName, EventInfo)
VALUES (?,?,?)
6) Go to parameter mappings and add 4 new mappings as following
System::PackageName
Input
nvarchar
0
System::SourceName
Input
nvarchar
1
System::ErrorDescription
Input
nvarchar
2
Save and reimport the package and then the event of the errors should insert into the table in detail
Ted Krueger
Blog on lessthandot.com @onpnt on twitter

Problem Running SSIS Package with a SQL Server Agent

SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

I accidently created two posts. The newest one has the details.
I did not mean to.
SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

SSIS package fails in sql server agent wirh 'Process exit code "-532459699" runs fine when run independantly

I have a SSIS package that fails when running via sql server agent. I can successfully run it from BIDS.    I have created a proxy account that is in the local server administrators group and is sysadmin. SQL Server Agent and SQL
Server Integration Services are running under the same account,
following the the error message:
Error: 2014-02-07 10:29:12.59
   Code: 0xC0029151
   Source: Execute De-linking Execute Process Task
   Description: In Executing "d:\cie\files\working\9426\PowerpointConsole.exe" " 60.ppt" at "d:\cie\files\working\9426", The process exit code was "-532459699" while the expected was "0".
End Error
This package ran successfully on a different server running windows 2003 and sql server 2008 r2. The new environment is windows 7 with sql server 2008 r2.

Hi Gaileg,
As Abhinav said, to check whether it is a 32-bit/64-bit issue, please check whether the package runs in 32-bit runtime mode or 64-bit runtime mode in BIDS by checking the Run64bitRuntime property of the project. Then, make sure the package runs in the same
runtime mode in the SQL Server Agent job by checking or unchecking the “Use 32 bit runtime” option for the Execution options of the job step.
If it is not the issue, please create another job that uses a CmdExec type job step to call the executable “D:\cie\files\working\9426\PowerpointConsole.exe”. If this job also fails, the issue is actually occurs because of the issue between executable and
SQL Server Agent rather than the SSIS package itself.
Regards,
Mike Yin
TechNet Community Support

How to script schedule in sql server agent

Hi,
How to script schedule in sql server 2005. When I click on script option in manage schedule, there is message ' there is no action to script'. So my question is how to create script for these schedule?
Thanks

As far as I can tell, there is no way to script an entire schedule using SSMS..
Hi D.,
this is not true - you can create, alter and delete ANY schedule with SSMS.
msdb.dbo.sp_add_schedule: create a new schedule
msdb.dbo.sp_update_schedule: alter an existing schedule
msdb.dbo.sp_delete_schedule: removes a schedule
msdb.dbo.sp_attach_schedule: set a schedule for an existing job
msdb.dbo.sp_detach_schedule: remove a schedule from a job
@dba_learner
all above stored procedures are located in msdb and fully documented.
Scripting of elements of a job can only take effect if you do any changes to it. Otherwise the best practice is th click right on the job -> [Script job...]-> [create to new window] to get the COMLETE syntax for the creation of the job. There is one step
for the schedule and its usage, too!
Uwe Ricken
MCM SQL Server 2008
MCSE - SQL Server 2012
MCSA - SQL Server 2012
db Berater GmbH
http://www-db-berater.de
SQL Server Blog (german only)

SSIS Package Fails when Scheduled as a SQL Server Agent Job

I have an SSIS package that runs without any problems when executed through BIDS.
However, when I schedule the SSIS as an Agent job, it fails completely or part way through. When it partially runs, the part that it is failing on is a Script Task that moves the source data file to an archive folder (on the same server).
I have tried using my domain account as the owner of the job, then the job fails straight off and I get an error:
Unable to determine if the owner (Domain\MyID) of job JobName has server access (reason: Could not obtain information about Windows NT group/user 'Domain\MyID'
If I change the owner to the 'sa' account , then the job partially runs, but then fails because 'sa' is a SQL account and does not have access to the filesystem.
I have managed to get it to work by using the SQL2008_Local account and granting modify permissions to the affected folders.
My question is - what is the advised way of doing this?
Thanks
Gary

Hi Garyv.King,
When you see a SSIS package fails running in a SQL Agent job, you need to first consider the following conditions:
1. The user account that is used to run the package under SQL Server Agent differs from the original package author.
2. The user account does not have the required permissions to make connections or to access resources outside the SSIS package.
For more detailed information about the issue, please following this KB article:
An SSIS package does not run when you call the SSIS package from a SQL Server Agent job step
http://support.microsoft.com/kb/918760
You can check SQL Server Agent’s activity logs, Windows Event logs and SSIS logs to get more clues. Also the tool Process Monitor is helpful to track the cause of registry or file access related issues.
The following 4 issues are common encountered in the SSIS forum.
1. The package's Protection Level is set to EncryptSensitiveWithUserKey but your SQL Server Agent service account is different from the SSIS package creator.
2. Data source connection issue.
3. File or registry access permission issue.
4. No 64-bit driver issue.
For more information about it, please see:
How do I troubleshoot SSIS packages failed execution in a SQL Agent job:
http://social.technet.microsoft.com/Forums/en-US/sqlintegrationservices/thread/e13c137c-1535-4475-8c2f-c7e6e7d125fc
Thanks,
Eileen

How to pass values to SQL server Agent Job which internally calls SSIS

Hi,
I have a requirement where i need to call remotely SSIS package from ASPX. After following MSDN form, I have creaed one SQL server agent job and calling that job from ASPX. I am ablt call SQL server agent job from ASPX. Only issue i am facing is: I need
to pass 2 variables from ASPX to SQL Agent job so that from Job i can map the same to SSIS Package.
I am using system SP (sp_start_job) for calling SQL server agent job as mentioned in MSDN forum.
below is the code , which i am using to call SQL serve agent job.
Code:
SqlConnection
jobConnection;
SqlCommand jobCommand;
SqlParameter jobReturnValue;
SqlParameter jobParameter;
int jobResult;
                jobConnection =
new
SqlConnection("Server=ServerName;Initial
Catalog=msdb;Integrated Security=SSPI;user id=username;Password=password");
                jobCommand =
new
SqlCommand("sp_start_job",
jobConnection);
                jobCommand.CommandType =
CommandType.StoredProcedure;
                jobReturnValue =
new
SqlParameter("@RETURN_VALUE",
SqlDbType.Int);
                jobReturnValue.Direction =
ParameterDirection.ReturnValue;
                jobCommand.Parameters.Add(jobReturnValue);
                jobParameter =
new
SqlParameter("@job_name",
SqlDbType.VarChar);
                jobParameter.Direction =
ParameterDirection.Input;
                jobCommand.Parameters.Add(jobParameter);
                jobParameter.Value =
"ImportCMTData";
                jobConnection.Open();
                jobCommand.ExecuteNonQuery();
                jobResult = (
Int32)jobCommand.Parameters["@RETURN_VALUE"].Value;
                jobConnection.Close();
switch (jobResult)
case 0:
Console.WriteLine("SQL
Server Agent job, RunSISSPackage, started successfully.");
break;
default:
Console.WriteLine("SQL
Server Agent job, RunSISSPackage, failed to start.");
break;
Console.Read();
Thanks
Pankaj

"3-4 concurrent users are calling the SSIS package from ASPX page" this is not a proper design
If the data is being ingested than it is likely that this concurrency will lead to one of the packages die
What you shell do is to just queue the data ingress/processing.
In general, again, packages should not be called from ASP web pages, SSIS is ETL-server side technology there is nothing signalling back to the user whether it was successful. The proper way is to write a REST service or alike.
Arthur
MyBlog
Twitter

Will Sql Server Agent start job when previous instance is running?

Just as an example, I have a job that is set to run every 5 minutes. The job takes 30 minutes to complete. So sql server agent executes the job at 9:30AM. Will the job run again at 9:35AM even though the previous instance hasn't completed?
In my case, I would like to reproduce what Task Scheduler already has, which is to
not begin a new instance until the previous instance has completed. When the previous instance completes, then 5 minutes later, the job will be run again.
Thanks.
VM

Apparently, it will skip it until the job is completed: http://stackoverflow.com/questions/865042/will-a-sql-server-job-skip-a-scheduled-run-if-it-is-already-running
VM

SQL Server Agent Job

I want to learn how to create a SQL Server Agent Job. After I googled it, I see that it can be found under Databases under Object Explorer, But I don't see that option. Can someone tell me where is it or how can i create one? I also need to
understand the steps to create one. (I just have basic knowledge of SQL Server of using small queries like Update, Delete, Select statements, etc). A plain english explanation would be very helpful.

BOL: "Create a Job
This topic describes how to create a SQL Server Agent job in SQL Server 2014 by using SQL Server Management Studio, Transact-SQL, or SQL Server Management Objects (SMO)."
https://msdn.microsoft.com/en-us/library/ms190268.aspx
See SSMS image for new job:
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

SQL Server Agent Job And Database Mail - Error formatting query, probably invalid paramters

We have a stored procedure that we are trying to call with a SQL Server Agent Job. The stored procedure calls Database Mail. This is SQL 2008. The execute task is simply:
USE [Production]
GO
EXEC [dbo].[JOB_EMAIL_SCHEDULED_REPORTS]
GO
When the job runs, it is erroring out immediately, with the error:
Execute as user: NT AUTHORITY\NETWORK SERVICE. Error formatting query, probably invalid paramters [SQLSTATE 42000] (Error 22050). The step failed.
When we go into SQL Server Manager and just execute the SQL query, it works though. Something within the SQL Server Agent job, and Database Mail is causing problems. Any ideas? Thanks.

Justin,
If you use SSMS then the procedure is executed under a different user when compared to running using a SQL Server Agent Job.
Isolate the problem by running a SQL Server agent job that sends a mail. Also check if the NT Authority\Network Service account is
in good standing. Look at the below thread with a similar problem that had an expired account.
http://social.msdn.microsoft.com/Forums/en/sqltools/thread/bac7ecee-a156-4313-b532-ba15813a0700
http://SankarReddy.com/

SSIS package is failing when using SQL server agent

I am trying to execute an SSIS package through an SQL server agent and receiving the following error:
Message
Executed as user: serv-syst\SYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started: 1:56:53 PM Error: 2014-04-21
13:56:54.81     Code: 0xC0202009     Source: PACKAGEWMG Connection manager "DestinationConnectionOLEDB"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E4D Description: "Login failed for user 'hsnzha'.". End Error Error: 2014-04-21
13:56:54.82     Code: 0xC00291EC     Source: Drop table(s) SQL Task 1 Execute SQL Task     Description: Failed to acquire connection "DestinationConnectionOLEDB". Connection may not be configured
correctly or you may not have the right permissions on this connection. End Error Error: 2014-04-21 13:56:54.82     Code: 0xC0202009     Source: PACKAGEWMG Connection manager "DestinationConnectionOLEDB"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E4D Description: "Login
failed for user 'hsnzha'.". End Error Error: 2014-04-21 13:56:54.82     Code: 0xC00291EC     Source: Preparation SQL Task 1 Execute SQL Task     Description: Failed to acquire connection
"DestinationConnectionOLEDB". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:56:53 PM
Finished: 1:56:54 PM Elapsed: 0.844 seconds. The package execution failed. The step failed.
My SSIS package retrieves a excel file and saves the vales into an SQL table. When I run the package by itself in my server it works fine but when it's called from a SQL agent, it fails with the above error. Please help me resolve it.

That's the issue. If it's a SQL login the password cannot be retrieved by account executing the package from the job which is why login fails. In that case best thing would be set password in job properties or pass it using configuration created in the package
See
HTTP://blogs.msdn.com/b/runeetv/archive/2011/12/22/ssis-package-using-sql-authentication-and-dontsavesensitive-as-protectionlevel.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
My package is saved with ServerStorage which appears under \\server\Stored Packages\MSDB\PACKAGE and when I run it, it works fine.
There is a new error message that I get now after following the steps from the link...
Message
Microsoft (R) SQL Server Execute Package Utility
Version 10.50.1600.1 for 32-bit
Copyright (C) Microsoft Corporation 2010. All rights reserved.
Started: 3:34:22 PM
Error: 2014-04-21 15:34:23.82
   Code: 0xC0202009
   Source: PACKAGEWMG Connection manager "SourceConnectionExcel"
   Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Office Access Database Engine" Hresult: 0x80004005 Description: "Unexpected error from external database driver (????????).".
End Error
Error: 2014-04-21 15:34:23.82
   Code: 0xC020801C
   Source: Data Flow Task 1 Source - 'Contact Center$' [1]
   Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009. There may be error
messages posted before this with more information on why the AcquireConnection method call failed.
End Error
Error: 2014-04-21 15:34:23.82
   Code: 0xC0047017
   Source: Data Flow Task 1 SSIS.Pipeline
   Description: component "Source - 'Contact Center$'" (1) failed validation and returned error code 0xC020801C.
End Error
Error: 2014-04-21 15:34:23.82
   Code: 0xC004700C
   Source: Data Flow Task 1 SSIS.Pipeline
   Description: One or more component failed validation.
End Error
Error: 2014-04-21 15:34:23.82
   Code: 0xC0024107
   Source: Data Flow Task 1
   Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:34:22 PM
Finished: 3:34:23 PM
Elapsed: 1.25 seconds

Error logging when running SSIS on SQL Server Agent

I have SSIS package running on SQL Server Agent Job.
When I'm running it, I get error and I'm urget to see History Logs.
When look Error logs in SQL Server Object Explorer, I don't find errors on this day.
Where should I look for error messages related to SSIS. Any thing to be configured on Management Studio or Data Tool?
Kenny_I

Hi Kenny_I,
As Russ posted, you need to expand the toggle to see the detailed information when viewing the Job history. Please see the screenshot below:
Besides, you can also edit the Job step, and switch to the Advanced tab to specify a job output file to log the detailed package execution failure information. The screenshot is for your reference:
Regards,
Mike Yin
If you have any feedback on our support, please click here<o:p></o:p>
Mike Yin
TechNet Community Support

Schedule SSIS packages as job in SQL Server Agent errors

Hi, I am using SQL Server 2008 R2 and created few SSIS packages and schedule them using SQL Server Agent and every time I try to schedule packages via SQL Server Agent my jobs keep failing. I am using domain/ione as the owner and when I invoke the job on
ServerA let's say and the job gets executed by domain/ServerA$ and fails as it does not have enough privileges. How do I fix this issue firstly without the proxy and why is the job being executed by domain/ServerA$ when the owner & user who invokes
it is domain/ione?
Thanks in advance............
Ione

Hi Ione,
The owner of any SQL jobs should be SA or any other non-expiring account
If you do not want the proxy used, then add the needed priveleges.
The owner of the job is one, the SSIS step gets executed by the account the Agent is running under.
Arthur
MyBlog
Twitter

Error while executing SSIS package which contains Script component through SQL Server Agent Job

Hello All,
I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
I manually execute SSIS package.
but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
but I am not sure what is the cause behind that? please advise.
Error:
Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5556.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 1:21:41 PM Error: 2015-02-25
13:21:45.94     Code: 0xC0047062     Source: Insert TLM Headers Script Component [205]     Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.    Server stack trace:      at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)     at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
e)    at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)     at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket) End Error Error: 2015-02-25 13:21:45.94     Code: 0xC0047022     Source: Insert TLM Headers SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:41 PM Finished: 1:21:45 PM Elapsed: 4.009 seconds. The package execution failed. The step failed.
Thanks
Pankaj

domain\user account has not proper rights
That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter

Obtain Job invoker for a SSIS job scheduled in SQL Server Agent

Similar Messages

Maybe you are looking for