Odbc sql server driver sql server incorrect syntax near 'è'

Hello.
An online game I host uses ODBC and SQL.
I'm using SQL Server Management Studio 2012.
I had two errors suddenly appear.
[Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near 'è'
and
[Microsoft][ODBC SQL Server Driver][SQL Server]Unclosed quotation mark after the string ".
Can anyone explain what these are and how I can fix them please.
Kind regards
Zath

Hello Zath,
"Unclosed quotation mark after the string" means there is a Quotation mark missing, like in this query at the end:
SELECT *
FROM sys.objects
WHERE Name like 'sys%
But without knowing your queries it's difficult to say, where & why this occurs.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Similar Messages

Strange error while executing a stored procedure: Incorrect syntax near '@p0'

All, I am getting a strange error while executing a stored procedure: Incorrect syntax near '@p0' using JDBC CallableStatment.
Here is my code...
CallableStatement cStmt = con.prepareCall("{call SET CHAINED ON EXEC <dbName>.<schemaName>.<SPName> (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}");
cStmt.setString(1, "2012005881");
cStmt.setString(2, "07");
cStmt.setString(3, "10");
cStmt.setString(4, "Case title");
cStmt.setString(5, "Open");
java.sql.Date dt1 = new java.sql.Date(2014,10,20);
cStmt.setDate(6, dt1);
cStmt.setString(7, "01");
cStmt.setString(8, "N");
cStmt.setString(9, "ADA Test");
cStmt.setString(10, "N");
cStmt.setString(11, "English");
cStmt.setString(12, "N");
cStmt.setString(13, "N");
cStmt.setString(14, "N");
cStmt.setString(15, "N");
cStmt.setString(16, "N");
cStmt.setString(17, "N");
cStmt.setString(18, "07");
cStmt.setString(19, "10");
cStmt.setString(20, "juache0");
java.sql.Date dt2 = new java.sql.Date(2014,10,20);
java.sql.Date dt3 = new java.sql.Date(2014,10,20);
cStmt.setDate(21, dt2);
cStmt.setDate(22, dt3);
cStmt.setString(23, "userid0");
cStmt.setString(24, "");
cStmt.setString(25, "");
cStmt.setString(26, "");
java.math.BigDecimal bg1 = new java.math.BigDecimal(10);
cStmt.setBigDecimal(27, bg1);
cStmt.setString(28, "userid");
cStmt.setString(29, "userid");
int hadResults = cStmt.executeUpdate();
Your help is greatly appreciated.
I am executing the above using Jconnect3.0 driver, inside WebSphere Application Server V8.0
Thanks
Nags

NOTE: I don't work with JDBC/jConnect so (at this point) just some questions ...
1 - are you sending this to ASE, ASA, IQ, or some other RDBMS?
2 - what is the value of <schemaname>?
3 - do you have other prepareCall() instances that successfully call a stored proc? [would be interesting to see if there's a difference in the format of the calls]
A quick google search shows a couple ways to submit a stored proc execution to the RDBMS, with the format depending on the format expected by the target RDBMS.
I'm wondering if you really need/want the parentheses around the argument list, ie, what happens if you change
from
-- parentheses around args
EXEC <dbName>.<schemaName>.<SPName> ( ?,?,?,?,?,...,? )
to
-- no parentheses around args
EXEC <dbName>.<schemaName>.<SPName> ?,?,?,?,?,...,?
In ASE if I wrap the parameters in parentheses I get the same error you're getting:
================== w/ parentheses => error
1> sp_who (sa)
2> go
Msg 102, Level 15, State 1:
Server 'CC1_V1', Line 1:
Incorrect syntax near 'sa'. <<=== sa == @p0 ??
================== w/out parentheses => works
1> sp_who sa
2> go
fid spid status loginame origname ...
 0 17 running sa sa ...
==================

[Microsoft][ODBC SQL Server Driver]COUNT field incorrect or syntax error

Hi , i am trying to execute siple SP using JDBC-ODBC Bridge Driver
Here my code :
String dsn="Tritek1";
String user="sa";
String password="imcindia";
Connection con1 = null;
CallableStatement cstmt = null;
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
con1=DriverManager.getConnection("jdbc:odbc:"+dsn,user,password);
Statement st=con1.createStatement();
st.execute("use dm0102d");
st.execute("setuser 'dm01012'");
cstmt = conObject.connection(" ?=Call dms_ex_get_folder_info(?,?,?)");
cstmt.setString(1,folderType);
cstmt.registerOutParameter(2,java.sql.Types.VARCHAR);
cstmt.registerOutParameter(3,java.sql.Types.VARCHAR); bFlag=cstmt.execute();
Here my SP :
 Procedure Name : dms_ex_get_folder_info
 Input Parameter(s) : a. folder_type char(20)
 Return Parameter(s) : a. Recordset consist edit_mask and folder_type_code from folder_reference table / error
 Procedure Type : select
 Programmer : Prashanth Kumar M.
 Creation Date : 12/20/2005 (20th Dec, 2005)
 Tables Accessed : folder_reference
 Revised :
 Programmer: Date: Description:
 Prashanth Kumar M. 12/21/2005 Modified the script as per the approved program specifications.
 Test Query:
 Declare @edit_mask char(15)
 Declare @folder_type_code char(2)
 execute dms_ex_get_folder_info 'Policy Folder',@edit_mask output,@folder_type_code output
 Print 'Edit Mask : ' + @edit_mask
 Print 'Folder Type Code : ' + @folder_type_code
CREATE PROCEDURE dms_ex_get_folder_info
 @folder_type char(20),
 @edit_mask char(15) output,
 @folder_type_code char(2) output
AS
 BEGIN
 -- Check if the record for @folder_type exists or not.
 BEGIN
 -- return the record from folder_reference
 SELECT
 @edit_mask= IsNull(edit_mask,''),
 @folder_type_code = IsNull(folder_type_code,'')
 FROM folder_reference
 WHERE
 folder_decode = ltrim(rtrim(@folder_type))
 -- return the error message
 IF @@error <> 0
 BEGIN
 RAISERROR 100016 'Error in gettting the record from folder_reference table'
 RETURN (@@error)
 END
 IF @edit_mask = '' AND @folder_type_code = ''
 BEGIN
 RAISERROR 100017 'No matching details in the folder_reference table'
 RETURN (@@error)
 END
 END
 END
GO
Here My Exception:
java.sql.SQLException: [Microsoft][ODBC SQL Server Driver]COUNT field incorrect or syntax error
 at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
 at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
 at sun.jdbc.odbc.JdbcOdbc.SQLExecute(Unknown Source)
 at sun.jdbc.odbc.JdbcOdbcPreparedStatement.execute(Unknown Source)
 at com.nyl.dms.bl.Folder.createFolder(Folder.java:121)
 at com.nyl.dms.bl.Folder.main(Folder.java:223)
Any one can help me to overcome this problem . Thanks in advance.
venkat

Here's from one of those 10s of books.
Quoted from JDBC 3.0 by Bernard Van Haecke:
Stored procedures can return multiple result types because they can be composed of SQL statements that return diverse result types: resultsets and update counts (this includes special error codes).
Now this doesn't sound very satisfactory. So I use Sybase since I don't have any other database at the moment, and write a simple stored procedure.
CREATE proc testproc AS
BEGIN
-- My return code
return 7
END
goThen a sample patchy buggy code to play around:
import java.sql.*;
public class ProcTesting {
 public static void main(String[] args) {
 String connUrl = "jdbc:sybase:Tds:myserver:5150/dbinst";
 String userName = "username";
 String password = "password";
 Connection con = null;
 CallableStatement stmt = null;
 ResultSet rs = null;
 String sql = "{? = call testproc}";
 try {
 Class.forName("com.sybase.jdbc2.jdbc.SybDriver").newInstance();
 con = DriverManager.getConnection(connUrl, userName, password);
 stmt = con.prepareCall(sql);
 stmt.registerOutParameter(1, Types.INTEGER);
 stmt.execute();
 System.out.println(stmt.getInt(1));
 } catch(Exception e) {
 e.printStackTrace();
 } finally {
 closeAll(con, stmt);
 public static void closeAll(Connection con, Statement stmt) {
 try {
 con.close();
 } catch(Exception e) { }
 try {
 stmt.close();
 } catch(Exception e) { }
}Followed by:
javac ProcTesting.java
java -cp "%CLASSPATH%;C:\jarutils\jconn2.jar" ProcTesting
Output:
7
Didn't you know this could be done?
Happy new year, grandpa!

ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near

Hi,
I am currently receiving the following error in BI Answers when I run a query against a Microsoft SQL 2005 Server.
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 16001] ODBC error state: 60 code: 8180 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Statement(s) could not be prepared.. [nQSError: 16001] ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'.. [nQSError: 16002] Cannot obtain number of columns for the query result. (HY000)
SQL Issued: SELECT 0 s_0, "SD&A_Dashboard_Test"."BORIS_ALIAS_ETMS_Users"."Id" s_1, "SD&A_Dashboard_Test"."BORIS_ALIAS_ETMS_Users"."UserName" s_2 FROM "SD&A_Dashboard_Test" WHERE ("BORIS_ALIAS_ETMS_Users"."UserName" = 'trowe') FETCH FIRST 65001 ROWS ONLY
I am able to connect successfully to the Data Source and run a query against the database using the NQCMD command line tool so believe I have configured the DataDirect 7.0.1 drivers correctly, also I am able to view the Table Data in the RPD Physical Layer in the BI Administration Tool. So don't understand why I am getting this error.
I have also activated the nquery.log but that doesn't really give me any further information.
[2015-04-28T16:37:22.000+00:00] [OracleBIServerComponent] [TRACE:4] [USER-34] [] [ecid: 4a9e440f990ba0a4:-1995d2c5:14d00d3ef04:-8000-00000000000001c6,0:1:1:5] [tid: 5f] [requestid: 6f11000b] [sessionid: 6f110000] [username: borisdev] -------------------- Query Status: [nQSError: 16002] Cannot obtain number of columns for the query result. [[
[nQSError: 16001] ODBC error state: 60 code: 102 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'..
[nQSError: 16001] ODBC error state: 60 code: 8180 message: [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Statement(s) could not be prepared..
[nQSError: 43119] Query Failed:
I was wondering if anyone could shed any light on what could possibly be causing the [DataDirect][ODBC 20101 driver][Microsoft SQL Server]Incorrect syntax near 'UserName'.. error ? And also provide any suggestions on how I can troubleshoot this issue further as I am now completely out of ideas of what to do next having tried numerous things i.e. setting IDENTIFIER_QUOTE_CHAR = '' in DBFeatures.INI which I found in similar posts on the subject all to no avail
Regards,
Tom Rowe

Hi Rajagopal,
Thanks for your reply after doing some further investigations this morning I found and corrected the problem...
The DataDirect Driver does not like double quotes in the query for some reason, testing using the BI Answers generated SQL with the nqcmd tool below...
With double quotes “” it fails immediately
Give SQL Statement: select T18706."Id" as c1, T18706."UserName" as c2 from "ETMS_Users" T18706 where ( T18706."UserName" = 'trowe' )
select T18706."Id" as c1, T18706."UserName" as c2 from "ETMS_Users" T18706 where ( T18706."UserName" = 'trowe' )
[102][State: S1000] [DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Incorrect syntax near 'Id'.
Statement execute failed
With double quotes removed for just the columns I now get the Error near ‘ETMS_Users’ which still had the double quotes
Give SQL Statement: select T18706.Id as c1, T18706.UserName as c2 from "ETMS_Users" T18706 where ( T18706.UserName = 'trowe' )
select T18706.Id as c1, T18706.UserName as c2 from "ETMS_Users" T18706 where ( T18706.UserName = 'trowe' )
[102][State: S1000] [DataDirect][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Incorrect syntax near 'ETMS_Users'.
Statement execute failed
With all double quotes removed it works !
Give SQL Statement: select T18706.Id as c1, T18706.UserName as c2 from ETMS_Users T18706 where ( T18706.UserName = 'trowe' )
select T18706.Id as c1, T18706.UserName as c2 from ETMS_Users T18706 where ( T18706.UserName = 'trowe' )
c1 c2
42499 trowe
Row count: 1
Give SQL Statement:
The solution to fix the problem is...
In the BI Admin Tool Physical Layer Database, Properties Features tab is to delete the double quote in the Value column for IDENTIFIER_QUOTE_CHAR, setting this in the DBFeatures.INI file does not resolve the problem possibly it did in earlier versions of the product.
Regards,
Tom Rowe

SQL Server 2005 Problem: Incorrect syntax near '{'

hi, 
 
I am using SQL Server 2005 JDBC driver from Microsoft (sqljdbc_1.0.809.102_enu.exe), there are some problem when calling stored procedure from Database Control: 
 
The following exception flow when parameters of the stored procedure were wrapped to newline : 
 
weblogic.jws.control.ControlException: ControlException on control test2005DBCtrl[Incorrect syntax near '{'.] 
 
Here is the method that generate the above exception: 
 
/** 
* @jc:sql statement:: 
* {call P_dummyProcedure 
 * ( 
 * {intValue}, {value} 
* ) 
* }:: 
*/ 
void callStoreProcedure(int intValue, String value); 
 
But if the parameters were not wrap, the method work fine: 
 
/** 
* @jc:sql statement:: 
* {call P_dummyProcedure 
 * ( {intValue}, {value} ) 
* }:: 
*/ 
void callStoreProcedure(int intValue, String value); 
 
The above problem exist when I change from SQL Sever 2000 to 2005. Both methods is ok for SQL Server 2000 (both the driver from BEA and Microsoft) 
Do any one got the above problem or know why? 
 
cheer ~
 

Wiz Cheng wrote:
hi Joe, 
 
following is a snippet of the config.xml, please see if that cover what you want ~ 
 
config.xml 
---- 
 <JDBCConnectionPool CapacityIncrement="5" 
?? ?? ?? DriverName="com.microsoft.sqlserver.jdbc.SQLServerXADataSource" 
?? ?? ?? InitialCapacity="10" MaxCapacity="100" Name="sql2005Pool" 
?? ?? ?? PasswordEncrypted="{3DES}lF9SivpaSCc=" Properties="user=sa" 
?? ?? ?? SupportsLocalTransaction="true" Targets="cgServer" 
?? ?? ?? TestConnectionsOnReserve="true" TestTableName="SQL Select 1" 
?? ?? ?? URL="jdbc:sqlserver://svr08006\\SQL2005:1533;databaseName=SBI" 
?? ?? ?? XASetTransactionTimeout="true" XATransactionTimeout="300"/> 
 
<JDBCTxDataSource JNDIName="JNDI_SQL_2005" Name="JNDI_SQL_2005" 
?? ?? ?? PoolName="sql2005Pool" Targets="cgServer"/> 
 
 
Thanks ~ 
WizOk, please recreate the pool, telling the console to use the BEA driver for MS.
when it shows you the pool properties, it should show you a URL, something like:
"jdbc:bea:sqlserver://......". Please then edit the URL to add this to the end:
;spyAttributes=(log=(file)spy.log, so the URL looks like
jdbc:bea:sqlserver://......;spyAttributes=(log=(file)spy.log)
Or just make the pool, and then edit the config file.
You should then see the config entry look something like this:
<JDBCConnectionPool CapacityIncrement="5"
DriverName="weblogic.jdbcx.sqlserver.SQLServerDataSource"
InitialCapacity="10" MaxCapacity="100" Name="sql2005Pool"
PasswordEncrypted="{3DES}lF9SivpaSCc=" Properties="user=sa"
SupportsLocalTransaction="true" Targets="cgServer"
TestConnectionsOnReserve="true" TestTableName="SQL Select 1"
URL="jdbc:bea:sqlserver://......"
XASetTransactionTimeout="true" XATransactionTimeout="300"/>
Then please alter the URL line so it's like:
URL="jdbc:bea:sqlserver://......;spyAttributes=(log=(file)spy.log)"
This will generate a file in the server directory called spy.log.
Then when the server boots, please then run the code that would
have caused the problem, as simply as possible, and then send
me the spy.log file.
thanks,
Joe

Problem: [Microsoft][ODBC SQL Server Driver][SQL Server]The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.

Hi Gurus,
I have this problem in my MS SQL Server 2012 that is running in SQL Server 2008 R2 Enterprise 64 bit.. Not sure why... Here is the full details of the error:
Microsoft OLE DB Provider for ODBC Drivers 80040E14
[Microsoft][ODBC SQL Server Driver][SQL Server]The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.
/Libraries/DBA/DBA.asa, line 717
Line 717 is this:
rs.open destTableName,,,,adCmdTable
Full details of the code:
 'Field object used to iterate through each field of the rs
 dim rs, fld
 'call dbInitRS(rs)
 set rs = server.createobject("adodb.recordset")
 'On Error Resume Next
 'Open rs
 set rs.activeConnection = myConnection
 rs.cursorType = adOpenKeyset
 rs.lockType = adLockOptimistic
 'rs.open destTableName
 rs.open destTableName,,,,adCmdTable
 'if err.number <> 0 then
 ' goto HandleError
 'end if
 rs.addNew
Any ideas how to solve this problem?
Thanks

Still does not work. I have allow MSDSTC in my firewall list.
Hi dudskie,
Have you try to use DTCTester or DTCPing to verify MSDTC functionality over the network? Please refer to the following article:
Troubleshooting Problems with MSDTC:
http://msdn.microsoft.com/en-us/library/aa561924.aspx
Use the DTCTester utility to verify transaction support between two computers if SQL Server is installed on one of the computers. The DTCTester utility uses ODBC to verify transaction support against a SQL Server database. For more information about
DTCTester see How to Use DTCTester Tool.
Use DTCPing to verify transaction support between two computers if SQL Server is not installed on either computer. The DTCPing tool must be run on both the client and server computer and is a good alternative to the DTCTester utility when SQL Server
is not installed on either computer. For more information about DTCPing, see
How to troubleshoot MS DTC firewall issues.
If you have any feedback on our support, please click
here.
Hope this helps.
Regards,
Elvis Long
TechNet Community Support

[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) Could not prepa

BO XI 3.1 in Webi Rich Client, i get this when I use the default Audit Universe to run the Sample Auditing Report.
A database error occured. The database error text is: [Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) Could not prepared..(WIS 10901)
In infoview webi i get this,
A Database error occured. The database error text is: [Microsoft][ODBC driver Manager] Data source name not found and no default driver specified. (WIS 10901)
We tried checking all the rights and we are trying this using the Administrator user. Also tried logon to Desinger, Import Auditing Universe and Verify the Parameters and then re exported. Still not working

Hi Prasanth,
Thanks for your suggestions and I tried all that what I can do along with your suggestion, and still getting the same error, all the connection are working fine, but when I checked for Integrity, Parse Object and Cardinality I was getting some Object error and cardinality error, which am trying to resolve, so I think am having a wrong version of the Activity Universe.
Thanks for your suggestion.
Thanks and Regards
Senthil

ORA-28500: [ODBC SQL Server Driver][SQL Server]0 is invalid sqlstate

ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server] 0 is invalid sqlstate. valid range is from 1 to 127. (SQL State: 00000; SQL Code: 2756)
I use gateway to call a procedure in SQL Server 2005, but forward error appears.Please help me.thanks.

I solve this problem myself.
In my sqlserver procedure, I want to insert a row into a table. One column cannot be set by Zero. Unfortunately,I set it to Zero. So......
uh......

[Microsoft][ODBC SQL Server Driver][SQL Server]

I have a stored procedure named windog_ReadSpecifications in a database called AssetDB and schema dbo, one of my users is getting the following errors when she try's to use a program which executes the stored procedure
"Error description:COM error message: [Microsoft][ODBC SQL Server Driver][SQL Server]The EXECUTE permission was denied on the object 'windog_ReadSpecifications', database 'AssetDB', schema 'dbo'."
I am not sure why she is getting this error because she is a user who has all permissions required to execute the stored procedure . Any help on how to approach this is highly appreciated.
thanks.

i ran fn_my_permissions as the user and it returned an empty
Empty result means: No effective permissions. Have you checked it the right way with:
select *
from fn_my_permissions('AssetDB.dbo.windog_ReadSpecifications', 'OBJECT');
Olaf Helper
[ Blog] [ Xing] [ MVP]

[Microsoft][ODBC SQL Server Driver][SQL Server]Could not find stored procedure 'dbo.sp_SPNAMEHERE'.

OK, something seemed to have changed with my system because this error is NEW. It might be related to my system upgrade from Vista to Win7, but just guessing here.
I run a database on a corporate MS Sql Server (2005) and an ASP application that connects via ODBC. The real world application works fine, however when I attempt to access Stored Procedures from Dreamweaver (on my development machine) I am getting the following error:
[Microsoft][ODBC SQL Server Driver][SQL Server]Could not find stored procedure 'dbo.sp_SPNAMEHERE'.
This only seems to happen on Stored procedures that RETURN a recordset.
system:
Win7
Dreamweaver CS4
Code: VBScript/Classic ASP
SQL Server 2005
Connecting via ODBC: MM_MY_STRING = "Driver={SQL Server};Server=wscxxxxxxxxx;Database=dbsystem;Uid=username;Pwd=XXXXXXXXXXXX"
Stored procedures that do not return a recordset are not an issue.... this has put my development work at a standstill!!
Thanks in advance!

Well, I hate bumps, but I am really running out of solutions. I have now tried to use a system DSN on my development machine and that didnt solve the problem. I just un-installed DW and re-installed it and that didnt solve my problem either.
This is very frustrating, because I cannot use any stored procs that return recordsets... I am stuck... can anybody think of a relatively easy work-around to working in DW w/ recordsets that come from SPs when you cant actually access them?
The really weird thing is, when I build the command, and choose the stored proc, and give it valid input variables, and TEST it from the TEST button, everything works and data is returned as expected. Once I click "OK" and actually add it to the ASP page the recordset that should be visible isnt... and when I click the plus sign in the bindings window I get the error...
Help!!

[823] [HY000] [Microsoft][ODBC SQL Server Driver][SQL Server]The operating system returned error 1450(Insufficient system resources exist to complete the requested service.) to SQL Server.

Hi,
I am facing an issue while loading fresh data into SQL server database.
we are able to load data into staging area, but while processing stored procedures system face bellow error message :
[823] [HY000] [Microsoft][ODBC SQL Server Driver][SQL Server]The operating system returned error 1450(Insufficient system resources exist to complete the requested service.) to SQL Server during a write at offset 0x00000243bd0000 in file 'E:\SQLDB\DBName.mdf'.
Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC
CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
we use windows 2008 R2 with SQL server managment studio 2008.
Appreciate your suggestion.
Thanks in advance.
Best Regards,
Manorath
Manorath

Hi Manorath,
Based on my research, this issue can be occurred in the following scenarios:
You are running a DBCC command on a large database. For example, you are running the DBCC CHECKDB statement on the database. At the same time, you run many DML statements on the database.
You create a database snapshot for a large database. At the same time, you are running many DML statements on the database.
In these scenarios, the SQL Server service stops responding. The DBCC CHECK statement is never completed, and you receive the error message repeatedly.
This issue occurs because the sparse file for a database snapshot file has exceeded the file size limitation in NTFS file system. When the operating system error 1450 occurs, SQL Server enters an infinite retry loop.
To fix this issue, please download and install Cumulative update package 1 for SQL Server 2008 Service Pack 1. Besides, because the fixes are cumulative, each new release contains all the hotfixes and all the security fixes that were included with the previous
SQL Server 2008 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix.
Reference:
http://support.microsoft.com/kb/967164
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

[Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help me

What are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]

ReportViewer using SQL Query error states: Incorrect syntax near ','.

Hello Community
    Using Visual Studio 2008 and SQL Server 2008 I created a Windows Application
that uses SQL Server Reporting Services. The application uses ReportViewer and
calls a method written using SQL query.
            1-First I created the form.
            2-Next I dragged the ReportViewer (Toolbox) and Table (from DataSource) onto the form.
The problem is that when it reaches the last line of the SQL query (ie, da.Fill(ds, "TableOne");)
the code fails stating the error message:
            "Incorrect syntax near ','."
     The following is the code behind the form containing the query:
        private void ReportPgm1_Load(object sender, EventArgs e)
            // TODO: This line of code loads data into the 'ReportDBDataSet.TableOne' table. You can move, or remove it, as needed.
            this.TableOneTableAdapter.Fill(this.ReportDBDataSet.TableOne);
            reportViewer1.ProcessingMode = ProcessingMode.Local;
            LocalReport ReportOneLocalReport = reportViewer1.LocalReport;
            DataSet ds = new DataSet("ReportDBDataSet.TableOne");
            pgmReportOne(FromDate, ToDate,   ds);
            ReportDataSource ds = new ReportDataSource("ReportDBDataSet.TableOne");
            ds.Value = dataset.Tables["TableOne"];
            ReportOneLocalReport.DataSources.Clear();
            ReportOneLocalReport.DataSources.Add(ds);
            this.reportViewer1.RefreshReport();
        private void pgmReportOne(DateTime FromDate, DateTime ToDate, DataSet ds)
            SqlConnection connection = new SqlConnection("Data Source=ReportDBServer;Initial Catalog=ReportDB;Uid=sa;pwd=Password");
            string sqlReportOne = "Select ([InDate], [FirstName], [LastName], [AGe]" +
                               "from TableOne";
            SqlCommand command = new SqlCommand(sqlReportONe, connection);
            command.Parameters.Add(new SqlParameter("paramFDate", FromDate));
            command.Parameters.Add(new SqlParameter("paramTDate", ToDate));
            SqlDataAdapter da = new SqlDataAdapter(command);
            da.Fill(ds, "TableOne");
    Why does the last line throw an error?
    Thank you
    Shabeaut

--NOTE: The statement below cannot be run on SQL Server 2012
--If you have an earlier version and can set the compatibility
--level to 80, it can be run.
SELECT sso.SpecialOfferID, Description, DiscountPct, ProductID
FROM Sales.SpecialOffer sso,
Sales.SpecialOfferProduct ssop
WHERE sso.SpecialOfferID *= ssop.SpecialOfferID
AND sso.SpecialOfferID != 1
Hi Scott
The *= is old syntax and not compatible with SQL Server 2012 (as stated in the comments).
You could do something like this instead
SELECT sso.SpecialOfferID
,Description
,DiscountPct
,ProductID
FROM Sales.SpecialOffer sso
left outer join Sales.SpecialOfferProduct ssop on sso.SpecialOfferID = ssop.SpecialOfferID
WHERE sso.SpecialOfferID != 1

[Microsoft][ODBC Microsoft Access Driver] COUNT field incorrect

Hello togehter!
I get the following error when I try to execute a insert statment in a table:
[Microsoft][ODBC Microsoft Access Driver] COUNT field incorrect
I have a table with PictureID (Autowert), Path and Diagnostic (Strings)
My preparedStatement is:
INSERT INTO Pictures (Path, Diagnostic) VALUES (?,?)
Any ideas??

private static int addPicture(String path, String diagnostic)throws SQLException
          PreparedStatement statement = DataBase.getConnection().prepareStatement("INSERT INTO Pictures (Path, Diagnostic)" +
               "VALUES (?,?)");
          statement.setString(1,path);
          statement.setString(1,diagnostic);
          statement.executeUpdate();
          statement.close();
this is the part of my method that is nor working.
Thanks for your help.

JDBC Receiver Adapter:Incorrect syntax near the keyword 'FROM'

Hi All,
I'm trying to get data from an SQL 2005 server using synchronous JDBC receiver adapter. I'm using PI 7.0. My outgoing message is as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_IZIN_YUKU_REQ xmlns:ns0="http://holding.com/brd/">
- <STATEMENT>
- <ECZ_IZIN_YUKU action="SELECT">
<table>ECZ_IZIN_YUKU</table>
<access />
- <key>
<iy_yil compareOperation="GT">1900</iy_yil>
</key>
</ECZ_IZIN_YUKU>
</STATEMENT>
</ns0:MT_IZIN_YUKU_REQ>
I've found the following log in the trace file:
#1.5#0014C23BCFC900630000003D000013B000042740B0A858B1#1169058702046#/Applications/ExchangeInfrastructure/AdapterFramework/Services/ADAPTER/ADMIN/JDBC#sap.com/com.sap.aii.af.app#com.sap.aii.adapter.jdbc.XI2JDBC.onInternalMessageBinary(Message)#J2EE_GUEST#0####fa10f5f0a65811db84410014c23bcfc9#XI XI2JDBC[CC_JDBC_RECI_BRD_TO_BHT/HUMANIST/]_2574##0#0#Error#1#com.sap.aii.adapter.jdbc.XI2JDBC#Plain###Error processing request, rollback: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ECZ_IZIN_YUKU' (structure 'STATEMENT'): com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near the keyword 'FROM'.#
Thanks a lot..

Hi,
Make sure the XML structure for your SQL statement is correct. Include the all the fields in the structure of XML.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_IZIN_YUKU_REQ xmlns:ns0="http://holding.com/brd/">
<STATEMENT>
 <TECZ_IZIN_YUKU ACTION="SELECT">
 <TABLE>ECZ_IZIN_YUKU</TABLE>
 <ACCESS>
 <EMPNO></EMPNO>
 <NAME></NAME>
 </ACCESS>
 <KEY>
 <iy_yil compareOperation="GT">1900</iy_yil>
 </KEY>
</TABLENAME>
</STATEMENT>
</ns0:MT_IZIN_YUKU_REQ>
Best Regards

Odbc sql server driver sql server incorrect syntax near 'è'

Similar Messages

Maybe you are looking for