Odd Menu behavior from 7940

I'm developing an XML service to allow users to set wake-up calls, and I'm seeing some weird behavior from my 7940. The phone gets up to the second screen in the application, a PhoneMenu, and then when I try to select one of the two MenuItems, it gets the appropriate URL from the webserver, but still displays the old page, and then if I try to select a MenuItem again, it doesn't go back to the webserver.
I've attached the XML for the two screens; the first one is ampm.xml and the second one is message.xml.

If you obtained it from Cisco Developer Support, isn't it for version 3.3.4? Are you sure you have the 4.0 version?
Nothing significant has changed between versions (that I am aware of). The newer version includes tags to support the model 7970 IP Phone/Communicator, and the old version had minimum values for some tags which have been removed for the most part in the new schema.

Similar Messages

Odd display behavior

Happy New Year to All!
I just recently upgraded to Tiger. Since that time, I have noticed some rather odd display behavior on my screen. For example, when I am on web site that has a "fill-in" box, once I highlight that box to fill it in, a black rectangle stays in that position on my screen until I click on the desktop.
Likewise, if I highlight an icon on the desktop, a black rectangle outlines the icon and stays visible until I either highlight something else or click randomly on the screen.
I never noticed this behavior under Panther (10.3.9) and while it's not a huge deal, it does seem odd. It's as if the screen doesn't refresh after moving on. Any ideas?
Thanks,
Brad
P.S. After posting this message, a black rectangle corresponding to the message edit box stayed on my screen. Irritating.

Hi William,
Yes, I tried both and booted / used my Tech Tool Deluxe repair disk. All no help. Don't know if they are related, but also have other odd things going on.
Is it normal to have two Restart selections, two Shutdown selections and two Logout Selections under the Apple menu in Tiger? I do. Didn't in Panther, but can't remember if I've always had them in Tiger. Should I?
Also, can't get my scanner (All-in-one, printer works) to run in Tiger. All of these problems go away when I boot into my 10.3.9 clone on my Firewire drive. I'd really hate to return to Panther, but ...
Basically, I'm getting some very odd behavior, from a system that has always been relatively bullit-proof until now. I do all the req'd housekeeping stuff, have both Macaroni and Cocktail. Don't know what to try.
Brad

Since upgrading to Mail 7.0 the menu popup from right clicking an element in an email has changed.

Since upgrading to Mail 7.0 the menu popup from right clicking an element in an email has changed. There is now only a short three item menu:
Previously there was a longer menu (like the one when right clicking an item on a Safari page):
I've looked in Preferences and at all the Mail dropdown items but can't find any way to get the old menu back (or why it changed). In particular, I miss the "copy image" item which allowed me to copy an item image into a new email for forwarding. I've got two email accounts, an IMAP and a POP. The behavior is the same with both.
Any ideas?
Thanks,
Richard

Your screen shots are not visible to me. But I think I understand your question.
Several thoughts come to mind:
rbhix wrote:
In particular, I miss the "copy image" item which allowed me to copy an item image into a new email for forwarding.
You can still, of course, simply forward the entire email message containing the image.
You could also use the "Save Attachment ..." feature available when you right click and copy and paste from there once the image is saved.
Less likely, you could also use the "Share" feature available when you right click, though I suspect it may not offer sharing options that you would like.

"Show Pop-Up Menu" behavior problems

Greetings—
The "Show Pop-Up Menu" under Add Behaviors is grayed-out and
won't allow additional links to be added to the templates. I'm
currently on DW MX 2004.
Thank you

> Does anyone have any suggestions what to do so this
selection is not
> grayed
> out?
The functionality has been REMOVED as a primary function in
CS3. It will
allow you to edit a LEGACY MENU, but not create a new menu
from scratch.
This is a good thing. The DW menus were indescribably
horrible.
In their place, use the Spry menus, or -
Check the uberlink and MacFly tutorials at PVII -
http://www.projectseven.com/
and the Navbar tutorial/articles at Thierry's place
http://tjkdesign.com/articles/dropdown/
Or this one (more recent article):
http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp
Or to get it done fast, go here -
http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Moni057" <[email protected]> wrote in
message
news:f3na5s$9lv$[email protected]..
>I just got CS3 (and un-installed DW8) and I have learned
that the "Show
>Pop-Up
> Menu" behavior is depreciated. The problem I'm having is
it is Grayed out
> (And
> yes, I made sure I had a 'link' selected when I tried to
choose this
> behavior)
Is there a setting in the Preferences that I missed or is CS3
just teasing
> me w/a remembrance of this easy to use pop up menu
maker? Any help is
> appreciated :)
>
> Thanks,
> Monica
>
> [email protected]
>
> ps: I do know about the "Spry assets" but I want to see
if the above
> option is
> possible first. thanx :)
>

CS3 "Show Pop-Up Menu" Behavior Help

I just got CS3 (and un-installed DW8) and I have learned that
the "Show Pop-Up Menu" behavior is depreciated. The problem I'm
having is it is Grayed out (And yes, I made sure I had a 'link'
selected when I tried to choose this behavior) Does anyone have any
suggestions what to do so this selection is not grayed out? Is
there a setting in the Preferences that I missed or is CS3 just
teasing me w/a remembrance of this easy to use pop up menu maker?
Any help is appreciated :)
Thanks,
Monica
[email protected]
ps: I do know about the "Spry assets" but I want to see if
the above option is possible first. thanx :)

> Does anyone have any suggestions what to do so this
selection is not
> grayed
> out?
The functionality has been REMOVED as a primary function in
CS3. It will
allow you to edit a LEGACY MENU, but not create a new menu
from scratch.
This is a good thing. The DW menus were indescribably
horrible.
In their place, use the Spry menus, or -
Check the uberlink and MacFly tutorials at PVII -
http://www.projectseven.com/
and the Navbar tutorial/articles at Thierry's place
http://tjkdesign.com/articles/dropdown/
Or this one (more recent article):
http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp
Or to get it done fast, go here -
http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Moni057" <[email protected]> wrote in
message
news:f3na5s$9lv$[email protected]..
>I just got CS3 (and un-installed DW8) and I have learned
that the "Show
>Pop-Up
> Menu" behavior is depreciated. The problem I'm having is
it is Grayed out
> (And
> yes, I made sure I had a 'link' selected when I tried to
choose this
> behavior)
Is there a setting in the Preferences that I missed or is CS3
just teasing
> me w/a remembrance of this easy to use pop up menu
maker? Any help is
> appreciated :)
>
> Thanks,
> Monica
>
> [email protected]
>
> ps: I do know about the "Spry assets" but I want to see
if the above
> option is
> possible first. thanx :)
>

Random freezing and odd keyboard behaviors on 10.5.8

My random freezing started on 10.5.6. Updated to 10.5.7 and the problem persist. I have decided to upgrade to 10.5.8. Everything seemed fine for a day and a half. Then all of a sudden random freezing when starting, login, wake from sleep, etc.. and now odd keyboard behaviors. function keys randomly work when computer is not frozen.
I have tried every option listed in the discussions here and elsewhere. Does anyone have the same problems?

I have tried so far:
disk permissions repaired from dvd and startup,
disk first aid,cleaned caches, virus checked, zapped the pram, reset power management, ran apple hardware check, ran disk warrior, trashed network prefs, deleted sleep image, replaced directory with techtool pro, tried new user account, re-updated, removed 3rd party software, and nothing works?????

Add/Delete Custom Behavior From Library

Greetings,
I'm pretty new at Director, but how do you add/delete custom
made behaviors from the behaviors library?
Thank you.

Another cool tip is to create your own empty external castlib
(not attached to the movie) and place it in the 'xtras' folder
(C:\Program Files\Macromedia\Director MX 2004\Configuration\Xtras).
Name it "my custom library" or something.
This way, it shows up is the Director 'xtras' menu, and when
selected, it opens as a regular unlinked castlib window which
allows you to directly copy from it and to it while you're working
in director.
hope this helps!
- Ben

Odd Playlist Behavior

Greetings,
I have been observing some odd behavior from my iTunes purchased playlist. One day it had completely reorganized itself. I checked, and I had selected it to be organized by number, basically the order I downloaded them in. So I don't have the wrong organization selected (like order by album or artist). Also, sometimes when I play a song it immediately moves to the bottom of the play list, it makes no sense! Any suggestions?

Sounds like you might have it sorted by either date added or Last Played date. Make sure that you click on the column header that you want to sort on.

Odd usage behavior

iPhone v101: this odd usage behavior just started half a week ago. This is the second time it happened. During standby, the usage time continues to count forward. I leave my phone on my desk not using it, but the usage still goes up. For example, the usage was 1 hour and 20 minutes when I checked like three hours ago, now it says 4 hours and some minutes. WiFi off, not running any apps, great signal and I cannot find anything running. This behavior also appear to drain the battery a little bit. The phone was not being charged or on plugged in anywhere; just sitting still on my desk. Now, the usage is back to normal and not accumulating time when I am not using it. This is strange. Have anyone else seem this happening? I had the phone for over a month now...

I didn't notice it causing any battery drain, but it sounds like I am charging it differently than you are. Here's how mine worked:
I would plug the iPhone into the wall charger at night to charge while I slept. In the morning, it would show a full charge by showing a plug on the small battery icon, but the large green battery would still have a sliver that wasn't green. The usage and standby stats would show something in the 3-4 hour range, presumably the time since it hit full charge.
I would disconnect the phone, check my email, and then take it to my desktop computer and plug it in to sync and update all my podcasts, etc. I would leave it plugged into my desktop while I showered while I got ready for work. By the time I was ready to leave, it would again show a full charge on the small icon, but now my stats would be reset to 0 and would function normally throughout the day. But nothing I did ever stopped the stats from running up during the night after attaining full charge.
1.0.1 got rid of the stats problem (they always stay at 0/0 in the morning with a full charge until I unplug the phone) AND the weird behavior of the large green battery indicator went away. Now both indicators show full charge in the morning.

I keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get it when I either try to open it from the Start menu or from the desktop icon.

I've just installed Firefox on my laptop and keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get this message whenever I either try to open it from the Start menu or from the desktop icon. I've never gotten it to work and even uninstalled it and then redownloaded it and still cannot get it to open. Any help would be greatly appreciated!!!!

Are you installing from the official site? http://www.mozilla.com/firefox
If you use Windows Explorer (My Computer) to check that path, is the Mozilla Firefox folder there? That is the normal installation location, but I think it's worth checking.
If the folder isn't there or firefox.exe is not in it, I wonder whether some other software might be interfering. You might want to run some supplemental security scans. These two tools are highly regarded:
Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
SUPERAntiSpyware : http://www.superantispyware.com/

How can i remove the menu item from a menu

how can i remove the JMenuItem from a JMenu at run time.
thanks in advance

This is in JMenu from the api
void remove(JMenuItem item)
Removes the specified menu item from this menu.
You must download the api! it helps a lot!
You can do that or if you need to access it again just set it visible(false);

Pop up menu behavior

I'm using Dreamweaver 2004 MX
Created a Pop up menu behavior in my Template and it worked
OK.
When new html pages are created based on theTemplate, the Pop
up menu does not work. Any suggestions?

Are you sitting down? Read this -
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jbudraitis" <[email protected]> wrote in
message
news:g9s73j$4hp$[email protected]..
> I'm using Dreamweaver 2004 MX
>
> Created a Pop up menu behavior in my Template and it
worked OK.
>
> When new html pages are created based on theTemplate,
the Pop up menu does
> not
> work. Any suggestions?
>

Photos menu dissapears from Apple TV

Photos menu dissapears from Apple TV as soon as I upload my library from my computer (the one that is synching with ATV) If I go to sources and I select ATV instead of my library the photos menu is back. In either case the photos are there as I can see them in the screen saver.
Everything was working well (including photos) for several weeks until today.
I have reset the ATV, reset my iTunes with no luck.
What should I do? Please help.
Thanks

Hi,
The photos menu is only available when you select the ATV as your source. and not when you select a streamed library.
This is because photos can only be synced and not streamed to the ATV.
Therefore, there is no Photo menu in a streamed source library.
See the fourth box on Photo syncing here - http://docs.info.apple.com/article.html?artnum=305270
Regards

Strange behavior from a PB G4 (Part 2)

On to my next issue. Often when I'm typing the insertion point will jump to someplace other than where it should be or just disappear all together. I'm not doing anything to cause it to do this. I've been being really carefull to not to do anything wrong. I'ts often enough to be a real nuisance. It happened 7 times during my first post (Strange behavior from a PB G4) and 3 times during this one. Please help. Thanks.

Igor_G5 wrote:
... I thought about putting in a larger drive but when I looked up instructions for it i was surprized at how difficult it was.
Did you use the iFixit website? It has excellent pictures and instructions that are easy to follow.
Replacing any hard disk drive will be challenging for a paraplegic, but with someone's help it can be done fairly inexpensively. There are many tiny fasteners that require tiny tools. Use an egg carton to store them, separated by their location in the PowerBook.
Earlier PowerBooks are easier to work on than later ones.
I still use a PowerBook G4 on occasion, mostly for importing video for editing in iMovie. I upgraded its original 60 GB HD to a much larger one. If you were to do this you would need to locate the PowerBook's original System Install DVD to install and subsequently update OS X and all its original programs.
If you ensure at least a few gigabytes free space, I think most of your problems will be fixed. When free disk space gets down to a few hundred megabytes or less, performance will suffer dramatically. You don't want it to ever get anywhere near that low. Strange things start to happen.
Keep the number of icons on the Desktop to a minimum also. That makes a difference, for reasons that I do not fully understand.

Remove menu bar from second monitor maverick

Hi, Can i Remove menu bar from second monitor maverick ?
Thanks

Apple has sort of screwed up the whole full-screen / multi-screen features of OSX. I get it's hard to achive it all in a "perfect way" for everyone but the so called "improved" multi-screen features of 10.9 add a number of issue on top of the "fixes".
1. Switching between apps with CMD + TAB is bugged with using 10.9 screen-setup. The OS doesn't understand what screen I'm using and the CMD + TAB feature shows up on screen 1 or screen 2. The only way I've found to controll this is by activating the DOCK on either screen which is a very bad solution.
2. Spotlight searching always follows the "active" screen. At least 10.9 understands what screen is my active one but in this case I never ever want screen 2 to have Spotlight on it. Very irriting.
3. Remembering application positions. If I open an app from the dock on screen 1, place it on screen 2 close it and again open it from the dock on screen 1 the app will open on screen 1 and not screen 2. Some apps will remember certain windows on the correct display. A solution is to open the app from the dock on the display you want it on. Very irritiating.
4. Swiching between apps is also bugged. Concider I have mail on screen 2 and a new mail window on screen 1. I CMD + TAB to Safari on screen 2 after starting to write the new mail on screen 1. No problems here. If I now howvever CMD + TAB back to mail, the last active window (new mail window on screen 1) won't be active. Very irritating.
As noted above, going back to what we had in 10.7 and 10.8 solves these issues but doesn't solve Apples horrible fullscreen app issues. I'd go as far as saying Apple hasn't really fixed anything in 10.9 - only cause more issues and confusing behavoir. Fullscreen apps are often very lacking in funktion, having safari or mail fullscreen renders them on a large screen very very limited compared to "maximized". It's also very confusion that you are required to travel between virtual desktops to use full-screen apps. I personally would prefer the option of "layered fullscreen apps". For example VLC allows me to work this way.

Odd Menu behavior from 7940

Similar Messages

Maybe you are looking for