ODS Activation - Number of Records Per Data Package

Hello,
We are using the default Global ODS Setting called "Min Num of Data Records"... which defaults to 10,000.
However, when I activate the ODS and look at the job log, I see that less than 10,000 records are in most of the data packages. Below is part of the job log. If the setting says the minimum must be 10,000 then why am i seeing data packages with less?
Thanks!
Data pkgs 000027; Added records 2,536; Changed records 0; Deleted records 0
Data pkgs 000028; Added records 2,436; Changed records 0; Deleted records 0
Data pkgs 000029; Added records 1,171; Changed records 0; Deleted records 0
Data pkgs 000030; Added records 1,743; Changed records 0; Deleted records 0
Data pkgs 000031; Added records 1,552; Changed records 0; Deleted records 0
Data pkgs 000032; Added records 8,048; Changed records 0; Deleted records 0
Data pkgs 000033; Added records 10,001; Changed records 0; Deleted records 0
Data pkgs 000034; Added records 10,001; Changed records 0; Deleted records 0
Data pkgs 000035; Added records 10,001; Changed records 0; Deleted records 0
Data pkgs 000036; Added records 10,001; Changed records 0; Deleted records 0

Hi Fong,
The settings for 'no of data records' specifies how many records should be transfered in a data package to BW for processing .
However added records specifies how many records of that data package actually loaded to your data target .
This may be because of
1.Key fields: Your key field settings may lead to elimination of any duplicate records
2.Update rule: Your update rule may have some filteration of records.
Hope this makes you clear.
Regards,
Prema

Similar Messages

How to find the number of records per months in cube

Hi,
how to find the number of records per months for my all cubes?
Can i use the ListCube transaction to find totl number f records per cube monthwise ?
Jimmy

Hi,
Here is a program to generate no of records and list of ODS and Cubes in Active version.Schedule this program in background and create a cube to load this information and schedule to the data from the file generated by the program. Schedule this all per you requirement.
1.Copy the code into your Z<programname> from Se38.
2.change the FILENAME in CALL FUNCTION 'GUI_DOWNLOAD' in the program to the location from where you can pick the information to load data to cube(eg Application server).
3.Save program.
4.Schedule the program in background as required
5.Create cube with infoobjects to hold no of records and Infoprovider name
6.Load this cube based on event after the program job is done.
Hence you can report on this cube to see no of records in CUBE or ODS in your box.
Please find the code below.
Cheers,
Kavitha Kamesh.
types: begin of itabs ,
      tabname type dd02l-tabname,
      end of itabs.
data: itab type itabs occurs 0 with header line.
data: counter type i.
data: begin of itab1 occurs 0,
tabname type dd02l-tabname,
counter type i,
end of itab1.
DATA: ITABTABNAME TYPE STRING.
DATA: LENGTH TYPE I.
DATA: OBJECT(30).
data: str(6) type c.
select tabname from dd02l into table itab where ( tabname LIKE '/BIC/F%' or tabname LIKE '/BIC/A%00' )
and TABCLASS = 'TRANSP' and AS4LOCAL = 'A'.
loop at itab.
select count(*) from (itab-tabname) into counter.
str = itab-tabname.
if str = '/BIC/F'.
LENGTH = STRLEN( ITAB-TABNAME ).
SHIFT itab-tabname BY 6 PLACES LEFT.
ELSEIf str = '/BIC/A'.
SHIFT itab-tabname BY 6 PLACES LEFT.
LENGTH = STRLEN( ITAB-TABNAME ).
LENGTH = LENGTH - 2.
endif.
itab1-tabname = itab-tabname(LENGTH).
append itab1.
itab1-counter = counter.
clear itab-tabname.
clear: COUNTER.
endloop.
*********** itab1
loop at itab1.
write:/ itab1-tabname, itab1-counter.
endloop.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                    =
    FILENAME                        = 'c:records.xls'
    FILETYPE                        = 'ASC'
*   APPEND                          = ' '
    WRITE_FIELD_SEPARATOR           = ','
*   HEADER                          = '00'
*   TRUNC_TRAILING_BLANKS           = ' '
*   WRITE_LF                        = 'X'
*   COL_SELECT                      = ' '
*   COL_SELECT_MASK                 = ' '
*   DAT_MODE                        = ' '
*   CONFIRM_OVERWRITE               = ' '
*   NO_AUTH_CHECK                   = ' '
*   CODEPAGE                        = ' '
*   IGNORE_CERR                     = ABAP_TRUE
*   REPLACEMENT                     = '#'
*   WRITE_BOM                       = ' '
*   TRUNC_TRAILING_BLANKS_EOL       = 'X'
*   WK1_N_FORMAT                    = ' '
*   WK1_N_SIZE                      = ' '
*   WK1_T_FORMAT                    = ' '
*   WK1_T_SIZE                      = ' '
* IMPORTING
*   FILELENGTH                      =
TABLES
    DATA_TAB                        = itab1
*   FIELDNAMES                      =
* EXCEPTIONS
*   FILE_WRITE_ERROR                = 1
*   NO_BATCH                        = 2
*   GUI_REFUSE_FILETRANSFER         = 3
*   INVALID_TYPE                    = 4
*   NO_AUTHORITY                    = 5
*   UNKNOWN_ERROR                   = 6
*   HEADER_NOT_ALLOWED              = 7
*   SEPARATOR_NOT_ALLOWED           = 8
*   FILESIZE_NOT_ALLOWED            = 9
*   HEADER_TOO_LONG                 = 10
*   DP_ERROR_CREATE                 = 11
*   DP_ERROR_SEND                   = 12
*   DP_ERROR_WRITE                  = 13
*   UNKNOWN_DP_ERROR                = 14
*   ACCESS_DENIED                   = 15
*   DP_OUT_OF_MEMORY                = 16
*   DISK_FULL                       = 17
*   DP_TIMEOUT                      = 18
*   FILE_NOT_FOUND                  = 19
*   DATAPROVIDER_EXCEPTION          = 20
*   CONTROL_FLUSH_ERROR             = 21
*   OTHERS                          = 22
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Max. number of records in a package

Hi,
I was asked an interview question of 'what are the maximum number of records a BW package can have?'
Can some one please answer?
Thanks
Sarah

Hi
Maximum size of a data packet in kByte 20000
U can find this in Scheduler(Maintain Info package) screen. In this screen in the menu go to Scheduler ---> DataS.Default Data transfer
regards
kiran

Can we change [maximum number of records per page] property at run time

can we change [maximum number of records per page] property at run time in report 6i

Ravi,
I hope you are already done with this. In the invoice there is a nice example you can use on the xml blogs.
You limit the number of lines per page when you use the xsl commands like this in your template:
<xsl:variable name="lpp" select="number(13)"/>
<?for-each@section:LIST_G_INVOICE?>
<xsl:variable xdofo:ctx="incontext" name="invLines" select=".//G_LINES[LINE_TYPE='LINE']"/>
<?for-each:$invLines?> <?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
and then you have the table where you have the data
<?for-each:$invLines?><?if:position()>=$start and position()<$start+$lpp?>
and all your lines
and then
<?end if?><?end for-each?>

Limit the number of records per page in webi

Hello All,
How do i limit the number of records per page in webi?
i was asked to have not more than 20 records per page.
In " NUmber of Vertical records per page"(Quick display mode) the default value was 100, i am trying to set it to 20 ...but its not updating....its still taking 100.
I am on BO XI 3.1 Sp2 fix pack 3
Please let me know a way to accomplish this.Any inputs appreciated
Thanks

It can be done as follows:
1. create a variable at report level as:
v Test = Floor(RowIndex()/20)
2. Added this variable in the Block as a new column.
3. Select the v Test column, Right Click and set as section (also you can apply break).
4. Go to structure mode select section\break and go to properties tab and select the property "Start on new page".
Regards,
Rohit

REPORT BUILDER: MAX. NUMBER OF RECORDS PER PAGE

Dear Consultant,
Using DEVELOPER 2000 R2.1 REPORT BUILDER, is there any way to set the " MAXIMUM NUMBER OF RECORDS PER PAGE" dynamically by user input when calling the report, without the need to modify the report at Design time and recompile it?
Thanks for your help.
Ghia Haidar
Developer
Astrolabe IT - Professional Consultants
Beirut, Lebanon
Phone: + 961 1 841.050
Fax: + 961 1 841.055 www.astrolabe.com.lb
null

Refer Manish question.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Ali DHAINI ([email protected]):
Dear Consultant,
Using DEVELOPER 2000 R2.1 REPORT BUILDER, is there any way to set the " MAXIMUM NUMBER OF RECORDS PER PAGE" dynamically by user input when calling the report, without the need to modify the report at Design time and recompile it?
Thanks for your help.
Ghia Haidar
Developer
Astrolabe IT - Professional Consultants
Beirut, Lebanon
Phone: + 961 1 841.050
Fax: + 961 1 841.055 www.astrolabe.com.lb
<HR></BLOCKQUOTE>
null

ODS Activation Returns 0 records in the Change Log

Hi All,
I have question regarding the Change Log build after the ODS req has been activated.
BW system - SAP NetWeaver BI 7.0 - Level 15
Upon loading a delta request into the ODS and Activating, it adds no records to the change log table.But the active table gets correct records
Checks I Did
ODS -> Menu-> Environment -> Delete Change Log Data.
     No job scheduled or runing to delete the change log reqs (sm37)
RSRV - Check the Status of the Generated Program of a Data Store Object
ODS - reactivation to see if it works..
ODS Manage - Auto Req Processing set Quality status, Activate DSO to Yes.
The Activation Log shows at the end that they were no changed records added:
Data pkgs 000001; Added records 0; Changed records 0; Deleted records 0
Log for activation request ODSR_4APQQHKM459YNO7CIGCE0629U data package 000001...000001
Activation of records from DataStore object C_PUR_C sucessfully finished
U table for DataStore object C_PUR_C deleted successfully
Job finished
Can anyone help on the above issue??
Thanks
Rao

Hello Siggi,
Referring to the previous post:
I have a situation where few documents are not transferred to Change log during DSO Activation, though the After image values of these records are reflected in Active table.
I have found one common pattern for those documents which are not recorded in Change Log.
They have two pairs of After and Before image records.
First Pair like this: Eg: Overall status as the only data field.
Sales Doc     Overall Statuls   Recordmode
1001             C                      X
1001             A
Second pair:
1001            A                      X
1001            C
If we consolidate all these 4 records there seems to be no change for any data fields. Should I consider this as the standard behaviour while activating DSO - causing these records not to get recorded in change log?
Or is there any SAP Note that can make sure the change log gets populated in such case.
Hope my details are clear to you..
- Varma

Maximum Number of record Per page using XML Publisher with RTF template

Hi
I am creating customer statement and want to show only 20 records per page. How we can set maximum number of repord per page in rtf template.
Thanks
Ravi

Ravi,
I hope you are already done with this. In the invoice there is a nice example you can use on the xml blogs.
You limit the number of lines per page when you use the xsl commands like this in your template:
<xsl:variable name="lpp" select="number(13)"/>
<?for-each@section:LIST_G_INVOICE?>
<xsl:variable xdofo:ctx="incontext" name="invLines" select=".//G_LINES[LINE_TYPE='LINE']"/>
<?for-each:$invLines?> <?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
and then you have the table where you have the data
<?for-each:$invLines?><?if:position()>=$start and position()<$start+$lpp?>
and all your lines
and then
<?end if?><?end for-each?>

IPad 2 -- will Verizon have an activation fee each time the data package is started?

I have an AT&T iPhone. Now with the iPad 2 coming out Friday, I was intending on getting the Verizon 3G version of the iPad 2. However, it is clear that AT&T's data plan is superior since there is no activation fee and the data package can be turned on and off at will. I also was going to go with the Verizon iPad 2 because Verizon's coverage through the Siskyou Mountains between Eugene OR and Redding CA is considerably better than AT&T on the I-5 corridor.
I signed up for Verizon emails about a week ago and have yet to receive a single email regarding their intentions for the iPad 2 costs. So we are certainly in the dark.
I'll line up at the Apple Store on Friday. If Verizon has an activation fee for the data package, I'll get the AT&T iPad 2. If not, then I'll get the Verizon iPad 2.

Not only is their website vague, their employees have no clue about the activation fee either. I called yesterday and the guy I talked with told me that yes, there would be a $35 activation fee every time you signed up if you remained inactive for 3 months or more. He also said that AT&T has a $36 activation. (ovbiously that is wrong.) So I called back today and the woman said that there would be a $35 activation fee PLUS there would be a $15 suspension fee every time I de-activated. I repeated several times that this is JUST for the IPad and only the 3g service. I asked to be transferred to another associate who told me exactly the same thing. So I asked that associate if she could check her computer and tell me exactly what it said about IPad service. What she said was that if you pre-pay with a credit or debit card, there would be no activation fee. Now THAT's more like it. Just to be safe, though, I called my local Verizon store. The woman there also thought that there was an activation fee so I told her what the last lady had said. She searched and searched - she even told me that her computer showed there was a $25 activation fee for pre-paid. She was very nice, though, and took my name and number and is looking into the matter and will call me back. I will post again once I hear from her. I hope someone at Verizon monitors these posts and will get accurate info out to their associates!

Program Process chain-- Number of records per day.

Hi Friends,
i need to develop a program based   upon the below template.
Chain Name      Start Date     Start Time   End Date      End Time     Total Run Time    Number of Records      Total number of records
                                                                                IP1/IP2/IP3
Imgaine that i have a process chain with 3 infocpakages..
Please help us in having the code as i donot know ABAP and program /ssa/bwt will not survive my purpose.\
Regards,
Siddhu

hi sid,
i think while creating the abap code u need to take help of following tables:-
Chain Name              RSPCLOGCHAIN. take chain id from corresponding Chain name, and navigate to table RSPCPROCESSLOG.
Start Date                          RSPCPROCESSLOG
Start Time                          RSPCPROCESSLOG
End Date
End Time                           RSPCPROCESSLOG
Total Run Time                  can be caluted using ENDSTAMP and STARTTIME.
Number of Records          RSMONICDP
Total number of records   RSMONICDP
you have to hit these table and take the latest data from your abap code.
thanks

Setting maximum number of records per page

Hi All,
Can anyone tell me how can i set the maximum number of records that should be printed per page in a XML REPORT. How can i write the XML tag for this.
thanks in advance,
siddam

Hi ,
Please check bi publisher blog from TIM.
http://blogs.oracle.com/xmlpublisher/2007/03/27
it will help you out.
Regards
Ratnesh

WLI problem when processing a high number of records - SQLException: Data e

Hi
I'm having some trouble with a process in WLI when processing a high number of records from a table. I'm using WLI 8.1.6 and Oracle 9.2.
The exception I'm getting is:
javax.ejb.EJBException: nested exception is: java.sql.SQLException: Data exception -- Data -- Input Data length 1.050.060 is greater from the length 1.048.576 specified in create table.
I think the problem is not with the table because it's pretty simple. I'll describe the steps in the JPD below.
1) A DBControl checks to see if the table has records with a specific value in a column.
select IND_PROCESSADO from VW_EAI_INET_ESTOQUE where IND_PROCESSADO = 'N'
2) If there is one or more records, we update the column to another value (in other DBControl)
update VW_EAI_INET_ESTOQUE set IND_PROCESSADO = 'E' where IND_PROCESSADO = 'N'
3) We then start a transaction with following steps:
3.1) A DBControl queries for records in a specific condition
select
COD_DEPOSITO AS codDeposito,
COD_SKU_INTERNO AS codSkuInterno,
QTD_ESTOQUE AS qtdEstoque,
IND_ESTOQUE_VIRTUAL AS indEstoqueVirtual,
IND_PRE_VENDA AS indPreVenda,
QTD_DIAS_ENTREGA AS qtdDiasEntrega,
DAT_EXPEDICAO_PRE_VENDA AS dataExpedicaoPreVenda,
DAT_INICIO AS dataInicio,
DAT_FIM AS dataFim,
IND_PROCESSADO AS indProcessado
from VW_EAI_INET_ESTOQUE
where IND_PROCESSADO = 'E'
3.2) We transform all the records found to and XML message (Xquery)
3.3) We update again update the same column as #2 to other value.
update VW_EAI_INET_ESTOQUE set IND_PROCESSADO = 'S'   where IND_PROCESSADO = 'E'.
4) The process ends.
When the table has few records under the specified condition, the process works fine. But if we test it with 25000 records, the process fails with the exception below. Sometimes in the step 3.1 and other times in the step 3.3.
Can someone help me please?
Exception:
<A message was unable to be delivered from a WLW Message Queue.
Attempting to deliver the onAsyncFailure event>
<23/07/2007 14h33min22s BRT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction
Xid=BEA1-00424A48977240214FD8(12106298),Status=Rolled back. [Reason=javax.ejb.EJBException: nested
exception is: java.sql.SQLException: Data exception -- Data -- Input Data length 1.050.060 is greater from the length 1.048.576 specified in create table.],numRepliesOwedMe=0,numRepliesOwedOthers= 0,seconds since begin=118,seconds left=59,XAServerResourceInfo[JMS_cgJMSStore]=(ServerResourceInfo[JMS_cgJMSStore]=(state=rolledback,assigned=cgServer),xar=JMS_cgJMSStore,re-Registered =
false),XAServ erResourceInfo[weblogic.jdbc.wrapper.JTSXAResourceImpl]=(ServerResourceInfo[weblogic.jdbc.wrapper.JTSXAResourceImpl]=
(state=rolledback,assigned=cgServer),xar=weblogic.jdbc.wrapper.JTSXAResourceImpl@d38a58,re-Registered =false),XAServerResourceInfo[CPCasaeVideoWISDesenv]=
(ServerResourceInfo[CPCasaeVideoWISDesenv]=(state=rolledback,assigned=cgServer),xar=CPCasaeVideoWISDesenv,re-Registered = false),SCInfo[integrationCV+cgServer]=(state=rolledback),
properties=({weblogic.jdbc=t3://10.15.81.48:7001, START_AND_END_THREAD_EQUAL=false}),
local properties=({weblogic.jdbc.jta.CPCasaeVideoWISDesenv=weblogic.jdbc.wrapper.TxInfo@9c7831, modifiedListeners=[weblogic.ejb20.internal.TxManager$TxListener@9c2dc7]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=
(CoordinatorURL=cgServer+10.15.81.48:7001+integrationCV+t3+,
XAResources={JMS_FileStore, weblogic.jdbc.wrapper.JTSXAResourceImpl, JMS_cgJMSStore, CPCasaeVideoWISDesenv},NonXAResources={})],CoordinatorURL=cgServer+10.15.81.48:7001+integrationCV+t3+): javax.ejb.EJBException: nested exception is: java.sql.SQLException: Data exception -- Data -- Input Data length 1.050.060 is greater from the length 1.048.576 specified in create table.
        at com.bea.wlw.runtime.core.bean.BMPContainerBean.ejbStore(BMPContainerBean.java:1844)
        at com.bea.wli.bpm.runtime.ProcessContainerBean.ejbStore(ProcessContainerBean.java:227)
        at com.bea.wli.bpm.runtime.ProcessContainerBean.ejbStore(ProcessContainerBean.java:197)
        at com.bea.wlwgen.PersistentContainer_7e2d44_Impl.ejbStore(PersistentContainer_7e2d44_Impl.java:149)
        at weblogic.ejb20.manager.ExclusiveEntityManager.beforeCompletion(ExclusiveEntityManager.java:593)
        at weblogic.ejb20.internal.TxManager$TxListener.beforeCompletion(TxManager.java:744)
        at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:1069)
        at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:118)
        at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1202)
        at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:2007)
        at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:257)
        at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228)
        at weblogic.ejb20.internal.MDListener.execute(MDListener.java:430)
        at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333)
        at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:298)
        at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2698)
        at weblogic.jms.client.JMSSession.execute(JMSSession.java:2610)
        at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
        at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
Caused by: javax.ejb.EJBException: nested exception is: java.sql.SQLException: Data exception -- Data -- Input Data length 1.050.060 is greater from the length 1.048.576 specified in create table.
        at com.bea.wlw.runtime.core.bean.BMPContainerBean.doUpdate(BMPContainerBean.java:2021)
        at com.bea.wlw.runtime.core.bean.BMPContainerBean.ejbStore(BMPContainerBean.java:1828)
        ... 18 more

Hi Lucas,
Following is the information regarding the issue you are getting and might help you to resolve the issue.
ADAPT00519195- Too many selected values (LOV0001) - Select Query Result operand
For XIR2 Fixed Details-Rejected as this is by design
I have found that this is a limitation by design and when the values exceed 18000 we get this error in BO.
There is no fix for this issue, as itu2019s by design. The product always behaved in this manner.
Also an ER (ADAPT00754295) for this issue has already been raised.
Unfortunately, we cannot confirm if and when this Enhancement Request will be taken on by the developers.
A dedicated team reviews all ERs on a regular basis for technical and commercial feasibility and whether or not the functionality is consistent with our product direction. Unfortunately we cannot presently advise on a timeframe for the inclusion of any ER to our product suite.
The product group will then review the request and determine whether or not the functionality/feature will be included in a future release.
Currently I can only suggest that you check the release notes in the ReadMe documents of future service packs, as it will be listed there once the ER has been included
The only workaround which I can suggest for now is:
Workaround 1:
Test the issue by keep the value of MAX_Inlist_values parameter to 256 on designer level.
Workaround 2:
The best solution is to combine 'n' queries via a UNION. You should first highlight the first 99 or so entries from the LOV list box and then combine this query with a second one that selects the remaining LOV choices.
Using UNION between queries; which is the only possible workaround
Please do let me know if you have any queries related to the same.
Regards,
Sarbhjeet Kaur

FDM Mapping Maximum number of records per Dimension

All, I have a unit that currently has over 2800 records for their account dimension. I can download all the records associated with the maps, but I can't see all the records in the Map Options window. It seems to stop at Page 20.
Is there a limit to the number of records FDM can view in the Map Options window?
Is there a limit to how many records a dimension can have?
Thank you for your help.

Thanks for the response Mehmet, I did as you recommended, and confirmed the count in tdatamaps as well as the same count downloaded to excel. It is literally the FDM view will not show all the records. I have downloaded them all, cleaned any questionable characters, re-uploaded, and again check tdatamap, counts are good, just not able to see the records in FDM map window. Very strange......
All Thoughts are greatly appreciated. Thank you

Limit number of records per page in RDF report

Hi Alll,
My rdf report query return 200 records but while prinitng on the paper i should restrict 60 records perpage... please help me on how should i do it...
Thanks in advance

Though the maximum records per page while prinitng it is printing continously on the paper...

Need help to display n number of records per page

I am trying to display the records using the RowSetIterate loop.
After showing 10 records, I break the loop using the
RowSetNavigate. After that I want to display the next 10 records
which I am not able to do. Can Anybody help?
The code is as follows
<%@ taglib uri="/webapp/DataTags.tld" prefix="jbo" %>
<jbo:ApplicationModule id="am"
configname="testPackage.TestPackageModule.TestPackageModuleLocal"
/>
<jbo:DataSource id="ds" appid="am"
viewobject="testEntityView" />
<table border="0">
<tr>
<td ALIGN="right"><jbo:DataScroller appid="am"
viewobject="testEntityView" /></td>
</tr>
<tr><td>
<table border="1">
<jbo:RowsetIterate datasource="ds" >
<% if (ds.getRowSet().getCurrentRowIndex() == 9)
{ %>
<jbo:RowsetNavigate datasource="ds"
action="Last" />
<% } %>
<tr>
<TD>
<jbo:ShowValue
datasource="ds" dataitem="Fullname" /></TD>
</tr>
</jbo:RowsetIterate>
</table>
</td>
</tr>
</table>
</table>
</BODY>
</HTML>

resolved this issue by using FlowN functionality available in BAM

ODS Activation - Number of Records Per Data Package

Similar Messages

Maybe you are looking for