OEM 9.2.0.1.0 - missing Job and Event menus

I'm using Oracle Enterprise Manager Console 9.2.0.1.0 and want to set up a nightly scheduled job to gather stats for a schema. There's lots of info in the Help files that refer to a Job menu, but I don't have that menu (or the Event menu). Do I need to install an additional component? I've searched around, but can't seem to find an answer.
Thanks,
Neil Parry

From the sounds of it you're using the standalone OEM console. To use jobs and events you need a 9i OMS (oracle management system) setup.
Suggest you look at the 9i docs for OEM.
Bazza

Similar Messages

OEM Job and Event - No Results

Hi,
How are you doing today? Well, I need your help. I am new DBA for one month old. I want to run OEM Jobs and Events.
I am able to log with sysman/oem_temp
i have created credential for node and database.
I am able to work on other parts except these two.
I am able to create job and event
after creating job . I am getting status as submitted.but it is not executing immediately.it is the same problem with event also.
In event ,one event get registered but another event status is not registered then i have checked for detail
error is like this
vd:1523 - there is no agent on node(server)
i didn't get what is inteligent agent and how to get it on node?
Well I have created new user with Windows 2000 having privileges for batch processing. same user is created in oracle database as well as oem administrator.
with same user database connection i am trying to create new job and event but it is not executing. i mean no results.
I know I am making you more confused.Sorry.......
I would like to ask your favour can I mail u if I have any query in future.
Thanks a lot in advance.
-Deepak

The intelligent agent is a process which has to run on the same node like the database you want to supervise with the OEM. You have to install the intelligent agent during the installation process of the database. After having installed the agent you have to start it (via the services panel in Windows). After that you have to ensure that the agent has discovered a database instance on the node (there should be entries for node, listener and database in the services.ora file in the ORACLE_HOME\network\agent directory). If this is all ok and the events or the jobs still doesn't work it may be a communication problem (are you using a firewall between the database node and the management server, or do you use network adress translation?).

Required Post Upgrade Jobs: Missing jobs and failures

Folks,
In reviewing "Required Post Upgrade Jobs", I found that "Compile Non-Compiled Flexfields" failed. The job was submitted by APPSMGR and immediately started since the Request Process queues were not initially deactivated as reccomended in doc 399362.1. I'm afraid I don't know the password for APPSMGR. Is there a way for me to restart this job so that any successors release?
Only a handful of the required jobs show to have been submitted and run. Would required jobs that have not run and do not appear in the queue need to be manually submitted?
Thanks for any help.

All of my post upgrade processes completed without error except the flexfield compile of AR_ADJUSTMENTS_ALL_DFV. It will not compile from within the forms either:
Oracle error 911: ORA-00911: invalid character
ORA-06512: at "SYSTEM.AD_DDL", line 165
ORA-06512: at line 1 has been detected in afuddl() [3_xdd].
do_ddl(APPLSYS, AR, 2, $statement$, AR_ADJUSTMENTS_ALL_DFV): private_do_ddl(APPS, APPLSYS, AR, 2, $statement$, AR_ADJUSTMENTS_ALL_DFV): do_cd_view(1, APPS, 2, AR_ADJUSTMENTS_ALL_DFV, $statement$): : do_apps_ddl(APPS, $statement$): : substr($statement$,1,255)='CREATE OR REPLACE VIEW AR_ADJUSTMENTS_ALL_DFV
(ROW_ID, "CONTEXT_VALUE", AdjustmentStatus,
CONCATENATED_SEGMENTS)
AS SELECT ROWID, ATTRIBUTE_CATEGORY, ATTRIBUTE4,
ATTRIBUTE4
FROM AR_ADJUSTMENTS_ALL'
View Name: AR_ADJUSTMENTS_ALL_DFV
I am going to apply 5484000 Oracle E-Business Suite 12.0.2 Release Update Pack (RUP2) tonight and see if it makes any difference.

How to create schedule job and event trigger in XI to start a ABAP program?

Dear All:
Here are what i need to do:
1.To run a ABAP program to start an XI scenario per hour.
2.To run a ABAP program to start an XI scenario per day at 6 PM.
3.To run a ABAP program used event trigger to make sure that XI scenario has finished the process and after that wait for 10 min later and run again.
only i know is used sm36 & sm37 to set up a schedule job.
but what i don't know is how to do it step by step.
especially point 3.
are there any step by step example can show me how?
it better be simple and details...
thanks you all
Regards
Jack Lee

Hi,
If you want to trigger the event manually from within SAP, use transaction
SM64
in SAP this is done by scheduling a job
once a new customer is entered
your scheduled report sends customer master data
you can schedule your report (TCODE - BD12 I think) to one day or every 5 minutes... it depend on your needs and the system performence
Regards,
Surya

Missing Titles and Themes menus

In January 2012 purchased Prem elements 10 and soon afterwards the tutorial DVD by M Jago. Then whilst watching this tutorial, discovered my Prem 10 only displayed one menu under either "Titles" or "Themes" under the Edit menu.
I was asisted by somebody within aAobe Empire to locate and download these mising menus, and then all was well.
A few weeks ago, my pc underwent an upgrade, clean etc, now I find these "Themes & Titles" have vanished as the Akamie programme was uninstalled, obviously not realising this was part of an Adobe download.
Can you again assist me to locate these missing "Titles, Themes" download content again, and is it possible to make a copy to disc, so this situation doesn't happen yet again.
I have viewed the website but unfortunately unable to locate any downloads for Prem 10 and the "Help" menu checking "updates" states all up to date.
I'm not very computer literate, so please try and keep reply simple to understand, without techical jargon.
regards

Hi Steve. Sorry previous reply may have been sent, before I had completed. Using Windows7 prior to purchase of Prem 10.
The initial issue was downloading the BBC tv programmes as they had completely changed the way this was done, when I could just download to Windows Media, but not now. The "upgrade" was more of a PC clean, uninstall unused programmes, sort out TV issue, and whilst doing this, found hard drive "compacted". How relevant box ticked no idea. However sorted this out.
Unfortunately unable to download the screen dump, made when your previous assistant found the answer, which I was hoping to send to you.
Hope this assists you. J

Missing file and other menus in photoshop elements 9 organiser

I have recently installed PS 9 but when I ope the organiser ther are no options in the top bar of the task window (i.e file ... help)
How do I get these to display so that I can get at diferent catalogs?

Have a look at this discussion and see if your problem is related:
http://www.elementsvillage.com/forums/showthread.php?t=63082&highlight=file+menu+missing

Creating a job and scheduling a job error in OEM

Hi, Everyone,
I am trying to create and schedule a job thru OEM. In the the pl/sql block provide i have given my code like this
begin
SET SERVEROUTPUT ON;
SPOOL C:\RFV_PROFILE_REPORT.LOG APPEND;
SELECT TO_CHAR(SYSDATE, 'DD/MM/YY HH24:MI:SS') FROM DUAL;
EXEC PAC_RFV_PROFILE_REPORT.CALL_ALL (200910);
SELECT TO_CHAR(SYSDATE, 'DD/MM/YY HH24:MI:SS') FROM DUAL;
SPOOL OFF;
end;
i have created the job and scheduled it but i am getting this error:
Error # 6550
Details ORA-06550: line 2, column 5: PL/SQL: ORA-00922: missing or invalid option ORA-06550: line 2, column 1: PL/SQL: SQL Statement ignored ORA-06550: line 3, column 7: PLS-00103: Encountered the symbol "C" when expecting one of the following: := . ( @ % ;
could anyone pls help as this is very urgent.
Thanks in advance

Ah, the problem is you are confusing SQLPlus commands with PL/SQL.
SET SERVEROUTPUT ON; -- This is a SQLPlus command, not necessary here.
SPOOL C:\RFV_PROFILE_REPORT.LOG APPEND; -- This is a SQLPlus command, in PL/SQL to write out to a file you will need to call the UTL_FILE package to open a file for writing to. Except that the file you write to will appear on the database server, not your workstation, when the scheduled job runs.
SELECT TO_CHAR(SYSDATE, 'DD/MM/YY HH24:MI:SS') FROM DUAL; -- In PL/SQL you need to SELECT columns INTO variables FROM tables. But in fact I guess you want to write the time to file using UTL_FILE again. However, you don't really need to do this, since scheduler will log the start time and run duration itself.
EXEC PAC_RFV_PROFILE_REPORT.CALL_ALL (200910); -- This is the SQLPlus equivalent of the PL/SQL command:
BEGIN
PAC_RFV_PROFILE_REPORT.CALL_ALL (200910);
END;
SPOOL OFF; -- This is a SQLPlus command, not necessary here.
So to summarise, all you really need is:
BEGIN
PAC_RFV_PROFILE_REPORT.CALL_ALL (200910);
END;
And the scheduled job will log the start time and duration in the database, which you can find here:
SELECT * FROM USER_SCHEDULER_JOB_RUN_DETAILS

Missing Job Options

Sorry if this has been asked before, but a search does not seem to turn up much.
I'm missing job options on Adobe Distiller 9 Pro. Here are my stats:
G5 1.8ghz, 4gb RAM OSX 10.4.11.
Acrobat 9.1.3 Pro
We just purchased this upgrade yesterday, downloaded and installed. Previously we had Acrobat 6.0 Pro. My problem is that anytime I start Adobe Distiller I get only two joboptions: PDFX1a 2001.joboptions and PDFX3 2002.joboptions.
All other joboptions do not show. I can see the rest of the job options in the following location: Macintosh HD>Library>Application Support>Adobe>Adobe PDF>Settings
I have tried fixing/changing permissions. I have tried deleting this folder. When I delete, Adobe Distiller recreates all job options, but I still cannot see more than the 2 previously mentioned job options. I can delete the following folder which Adobe Distiller recreates: Macintosh HD>Users>~username>Library>Application Support>Adobe>Adobe PDF>Settings. This folder is empty when created. I can copy job options to that folder; Adobe Distiller still only sees 2 job options.
When saving a new job option in to either location I get an error. If I save to the desktop and copy into either location Adobe Distiller will then recognize the new job option. Someone else on another forum had a similar issue which is how I was able to find out that I could save and move.
Does anyone have any ideas on how to force Adobe Distiller to recognize these missing joboptions? I would really rather not have to recreate them if I don't have to.
Additional info that I think may be pertinent to this:
I suspect that this is a permissions issue related to the following: My user account is a network account. We have a Windows 2003 SBS server running Active Directory. Our usernames (and therefore shortnames) are standard. First Name period Last Name. Ie., Erik.Youngren I have Acrobat 9 Pro installed on my PB G4, but my user account here is a local account with no period in the shortname. No issues on the PB.
But if this is the case, why would Distiller then see the newly created joboptions when copied into the Settings folders?
I'm out of ideas!

~graffiti wrote:
PuebloPublishers7122 wrote:
Well. For anyone else who may run across this issue. Further googling came up with someone else's issue on Windows, whereby installing Acro 9 while earlier versions of Acrobat were still on the HD led to incompleteness and instability.
Actually. That's a windows only thing. You can run all the versions you want on a Mac.
The fix must have had something to do with the reinstall.
Actually, there is one exception Graf.
if you have multiple versions of Acrobat installed, you may run into a problem where two or more copies of the AdobePDF Driver file installed. The problem stems from the fact because of the way Adobe names the AdobePDF with such names as AdobePDF 7.123 and adobePDF 8.056 and so on it has a a unique name and therefore is added to Print driver list. But when its shown in the Printer list you have something like :
AdobePDF 9.0
AdobePDF 8.0
HEWLET-PACKARD DESKJET 990CSE
LABELWRITER 400
the problem arises in regardless of which one you choose you end up making double copies of the PDF. I've had this happen to myself.
the cure is to remove any and all versions of AdobePDF from Printer Utility, then Open the newest version of acrobat and have it repair installation. (Install the Adobe PDF Driver).
All older versions can use the newer version because it has all the new features plus all the old features. However, while an older version may work any features that came out after will not work.

Event based scheduler job - 2 events at the same time only 1 run

Hi,
i converted our dbms_job - jobs to the newer package dbms_scheduler.
It is a 10.2.0.4 patch 23(8609347) database on an windows server 2003 R2 Enterprise x64 Edition SP2.
The Jobs(about 130) are nothing special ... only some statistics, matview-refreshes and so on.
For the notification of failed jobs and jobs which run over the max_run_duration i downloaded and installed the job notification package.
The jobs are assigned to different departments and the corresponding developer teams in our company.
I created a notification job for each department and if a job fails we (the database administrators) and the corresponding deverlopers will be informed.
Now i ascertained that only 1 email will be send if 2 jobs of the same department fails at the same time.
The emailer-jobs are auto-generated by the job notification package. I only modified them to look after all jobs of special department and not only after one job. (--> event_condition ... object_name LIKE 'XXX%')
example for dba-jobs(copy of the script output of TOAD):
SYS.DBMS_SCHEDULER.CREATE_JOB
       job_name        => 'DBA_JOBS_EMAILER'
      ,start_date      => NULL
      ,event_condition => tab.user_data.object_name LIKE ''DBA%'' AND tab.user_data.event_type in (''JOB_FAILED'',''JOB_OVER_MAX_DUR'')'
      ,queue_spec      => 'SYS.SCHEDULER$_EVENT_QUEUE, JOB_FAILED_AGENT'
      ,end_date        => NULL
      ,program_name    => 'SYS.EMAIL_NOTIFICATION_PROGRAM'
      ,comments        => 'Auto-generated job to send email alerts for jobs "DBA%"'
    );I thought that a queue is used to manage all events from the scheduler jobs. So i made a test with 2 dba jobs and simulated a failure at the same time but i received only one mail.
So what is happend with the second event? I looked for the events in the qtab(SCHEDULER$_EVENT_QTAB) which belongs to the event queue(SYS.SCHEDULER$_EVENT_QUEUE) and no event was missing.
So i think the emailer job has to run 2 times.
Is anyone able to explain or to find my mistake?
I know that the easiest way is to create one emailer job for each normal job but i think this is a little bit costly because all the arguments are the same for one department.
Thanks & Regards

Thanks for your fast answer.
You are right with the "enabled => TRUE;" part and i only forgot to post it.
So the Job is enabled (otherwise it would not send any mail). Because it is sending one mail i think it is also not necessary to hand over a job_type.
Additionally the job starts a program ... so it is right to set the job_type='STORED_PROCEDURE' isn't it?
And also right ... i already added the agent as subscriber to the queue.
Anyway i think the whole thing do what it have to do. So in my oppinion there are no big mistakes in creating the job or at adding the subscriber.
There are also no problem in raising the events by itself and enqueue them in the scheduler event queue.
There is only a problem when 2 jobs fails (or run out ouf max duration) at exactly the same time.
If i understand it right:
The agent/subscriber will find the "JOB_FAILED"-event for the first Job in the queue and starts the emailer Job.
The agent will also find the "JOB_FAILED"-event for the second Job and wants to start the emailer Job again.
I don't know if this is really the problem but perhaps the emailer-job can not be started in consequence of the second event because ist is already running.
I also don't know if this is a mistake of the agent or of the emailer-job by itself.
I only want that it runs two times (one run for each event). I my case it also doesn't matter which email is send at first.

CS4 Media Encoder batch jobs, and .avi ffdhshow

I have two distinct, but slightly related questions to ask.
First I should point out: I've used Premiere and After Effects for creative purposes before, but today I am using Adobe software for a more practical purpose: some engineering research work. Essentially, I have thousands of hours of video to process, I have all the firepower needed to perform it, I am currently limited by the ammount of time I am stuck clicking away at the computer.
Essentially my job right now is to convert and concatonate 1 minute segments into larger cohesive files. I say convert because the supplied files are encoded as .avi with an obscure proprietary surveillance video format (Mavix, for those of you familiar, doubt it though, even a google search won't bring up anything). It's okay, I have the VFW installed and so far I've been doing fine (if not slowly) pre-converting to NTSC DV default with AME CS4 and then importing into VDub (handy because of it's automatic file appending feature) at which point I compress with ffdshow (gave me the best performance considering quality, compression and processing perfromance). Vdub is also handy because I can take better advantage of multi-cores (8 per machine) by running Vdub jobs and AME jobs simultaneously. I am still amazed how mult-tasking on these machines gets me absolutly no performance hits.
Why is it that I am using AME? It seems to be the only thing that can decode these Mavix files (I've tried them all). And only a direct convert through AME... if I open it up in premiere first, then export it, the video glitches.
Question 1:
Right now, the biggest challenge is batch converting videos. I can drag up to 70-75 videos (regardless of hardware) into AME before it starts rejecting files. I would like for it to pre-process thousands of them at a time automatically. Any ideas how the queue size can be increased or how I can properly batch convert thousands of files at a time? Checking back at a computer every 20 minutes for a week is a real waist of time when I could leave it sit over the weekend in a corner and do it's thing.
Question 2:
I wanted to reuse the concatenated files that Vdub spat out (.avi ffdshow H.264 -> no comments please, I have a good reason for doing this) for some other work. I just want to know if it is possible to get Premiere to work from these files directly or if I have to reconvert them to somethign else first. So far, importing them yields black video.

Hi,
I have absolutely no experience with this...but as to question number 2... I did a google search on ---avi ffdshow h264 cs4 ----and found this info
As you probaby know a lot of people using premiere are adament about NOT loading codec packs, and in particular ffdshow and k-lite...but you probably know that or you might not have said " no comments please "....etc.
That said, there is a part of the following stuff that says something about using cs4 with ffdshow with h264 enabled in the video and something enabled in the sound.. and then the reference to K-lite...but that k-lite post was using ( at that point ) a different editor I think...so take this with a grain of salt and maybe check the ffdshow enabled setting so you can see your video in PP...
Good luck ....and I hope your computer doesnt explode or anything bad happens...which might mean a total reformat and reinstall etc...
http://forum.videohelp.com/threads/302604-Creative-Vado-HD-AVI-%28H-264%29-Editing
· I also own a Vado HD.
May I know which editor is compatible with it?
Quote
· 13th Apr 2009 09:36 #7
poisondeathray
View Profile
View Forum Posts
Private Message
Member
Join Date: Sep 2007
Location: Canada
For simple edits, you can use vdub (see above)
If you need a NLE, Vegas Pro 8 will work, if you have ffdshow (h.264 enabled) or x264vfw, but it won't see the audio. So you can open it in vdub and save the audio as wav then import into Vegas
Premiere Pro CS4 will work, but you need ffdshow (h.264 enabled in the video configuration and MSADPCM enabled in the audio configuration)
Cheers
Quote
· 10th May 2009 23:15 #8
rogerconnery
View Profile
View Forum Posts
Private Message
Member
Join Date: Sep 2006
Location: United States
Hi, I just bought a Creative Vado HD and I have 3 clips I just want to paste together.
I downloaded Virtualdub, downloaded x264vfw, downloaded ffdshow (h.264 enabled) and installed all three. I still can't open any of the Vado HD clips into Virtualdub. I get an error message. Is there another step I am missing?
Thanks in advance!
Quote
· 10th May 2009 23:21 #9
poisondeathray
View Profile
View Forum Posts
Private Message
Member
Join Date: Sep 2007
Location: Canada
do you have this version installed?
http://sourceforge.net/projects/x264vfw/
if that doesn't work for you , enable h.264 in the ffdshow vfw decoder interface (yellow icon, not red icon), because vdub relies on vfw , not directshow ( ROBODOG2 NOTE ----GRAPHIC BELONGS HERE.....SEE BELOW )
Quote
· 11th May 2009 12:16 #10
rogerconnery
View Profile
View Forum Posts
Private Message
Member
Join Date: Sep 2006
Location: United States
@poisondeathray - yes that helped! thank you!!!
Now that I am able to "edit" my Creative Vado HD videos in Virtualdub, I notice something very strange. Each video clip is approx 30 seconds long. The total combined/merged clips should be approx 2:30 long. However, windows media player (as well as right clicking for properties) says the video is WAY longer than it should be (like 11 min long)!!!
Anyone else notice this? Is this a virtualdub mistake or human error on my part?
Quote
· 11th May 2009 12:49 #11
poisondeathray
View Profile
View Forum Posts
Private Message
Member
Join Date: Sep 2007
Location: Canada
Did you do any editing or just append the clips? If you edited portions did you cut on keyframes?
Did you set "direct stream copy" for video & audio?
What do other media players (e.g. vlc, kmplayer, smplayer) and mediainfo say about the joined clip ?
Quote
· 26th Jul 2009 15:54 #12
cybereality
View Profile
View Forum Posts
Private Message
Member
Join Date: Jul 2009
Location: United States
Has anyone found a solution to this issue yet? I can't believe Creative would release a product like this with almost no 3rd-party support. I really wanted to get this camera, but this is a deal-breaker. I managed to get a few raw files from the Vado HD to test. They work fine just for playing in WMP, but I cannot edit the videos in any program I tried. Adobe Premiere CS4 doesn't work. You see the audio but no video. If you try to do basically anything it crashes. Sony Vegas 9 doesn't work either. Same deal, audio with no video. Same issue in VirtualDub. I have ffdshow installed and H.264 is enabled (libavcodec). Do I have any other options here?
Quote
· 26th Jul 2009 17:34 #13
Xpenguin17
View Profile
View Forum Posts
Private Message
Member
Join Date: Jul 2009
Location: United States
Download and install K-Lite mega codec pack. The ffdshow configuration will be pretty streamlined so you likely won't have to screw around with it after the install.
Quote
· 26th Jul 2009 22:56 #14
cybereality
View Profile
View Forum Posts
Private Message
Member
Join Date: Jul 2009
Location: United States
Thanks Xpenguin17. I installed the K-lite mega pack and now I can import the Vado HD raw avi files into Premiere. So far everything looks good. Thanks a lot.

Scheduled Jobs and Server Maintenance

Hi All,
Running SQL 2012. We have a series of scheduled jobs that run once per day, with no retry interval set. I was informed by IT today that they need to perform unscheduled maintenance on the server this evening - which may or may not be completed
by the time our jobs are set to run. My question is: if a job is set to run at (say) 10pm, and the server is off - when it is restarted, does it try and execute this missed job? Or does it just do nothing and next execute according to it's regular
schedule (so, at 10pm the following night?)
Thanks.

The job doesn't fail if SQL Server isn't started when the job is supposed to start. If SQL Server isn't started, then there is nothing tat will attempt to start the job and there's nothing to fail.
There's no re-try here. SQL Server Agent will run the job next time (assuming it is started, of course).
Tibor Karaszi, SQL Server MVP |
web | blog
Hello Tibor,
I guess this is what Prashanth was trying to say. That if job is missed,because agent was not online, when agent comes online it wont execute it immediately but would follow normal course. Hope I am saying correct
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Triggering Process chain based on execution of R3 job and Process Chain

Hi All,
I need your help in arriving at a solution for a reqirement.
Scenario is., I need to trigger a process chain B based on successful execution of Process chain A and an R3 job. If both conditions(Completion of R3 job and Process Chain A) are met then only it has to trigger process Chain B.
I know that we can use events to trigger a process chain using R3 job.But my case is differenet I need to consider the success message from both process chain and R3 job.Is there any way to solve it ?
Please provide me with your valuable inputs.
Thanks,
Bindu

Hi Hima,
You can use the 'AND' variant for both, If both are success then trigger the process chain.
Regards,
Ravi Kanth
Edited by: Ravi kanth on Apr 30, 2009 3:36 PM

I need to use Outlook Express to apply for jobs and I either don't have it but when I try to send an e-mail on Outlook Express, it won't go through and gives me an error report.....I really need to be able to use Outlook Express to apply for jobs. Help!

When I try to apply for job and when I try to e-mail my resume' and Outlook Express comes up to reply to on, I put in my information, etc but when I hit send, it doesn't go through and says? POP and then error report and doesn't go through.

I can't provide a solution with or without the error message, but without an error message, you are making everyone guess at what you see. I have no idea what you see, and I think someone who might be able to help you solve your problem would need to know what that message says. Is "Outlook Express" (Windows Live Mail) your default email processor, if not what is?

Missing images and not able to use copy and paste anymore - just blank rect

Hello!
I've a problem that really scares me.
I use severall png and pdf images. But at one point keynote looses the media and just displays these grey rectangles instead of some images. I tried to figure out if it just happens with pdf images and replaced the missing pdf images through png24 images with transparency. It first worked fine (they showed up) and then it tells images can not be saved. If I open the presentation again, the images are missing. And it seems that the more images and slides i put in the presentation, the more images are missing…
But there is more: I even can't copy and paste these images anymore. If I try to copy one of the images I just have replaced (because they have been lost by saving), it just pastes the blank grey rectangle instead of the image.
This really is a problem because I now have to repetitive tasks (like same animation for the same image in the same size) over and over again. And when I save the doc – they are al gone again…
It really scares me and I don't have an idea how to solve this.
It also happens, if I repleace an pdf image with an png image and than try to copy this new png image. However I am able to drag the image from the Finder again.
I am working on a PB G4, 1.5 GHz, 1 GB RAM.
My Keynote Version is 3.0.2.
The Keynote Dokument is saved and opened from a G4 X-Serve wich is only used by Macs (so no Windows Filesystem anywhere). I still have anough space on both, my local and the server volume. I don't transfer the Keynote document. So it should not be a problem with the names on the files… And the files are just exported from Adobe Illustrator (png 24 files with "save for web" and the pdf files are saved as Illustrator pdf) – so they should really be fine and not corrupted…
At this time the Keynote document has a size of 179 MB (because of a video) and only 16 slides. And the theme was built from scratch – so no import from Powerpoint or so…
I looked through the Keynote preferences and found a thing like (sorry self-translated from german version to english) "scale placed images to slide-size". I wondered if keynote saves a copy of the sacaled image after that and corrupts the image itself? But I don't think so.
I've had these problems with earlier versions of Keynote, but it occured just sporadically and I could solve it through pasting it again. But this time I can not solfe it anymore.
Does anybody encounter same problem? Or has a hint?
I really would appreciate, because I have to finish the presentation very soon and are not able to work properly with that. Furthermore, I am scared of saving and opinging the presentation again, because the lost files can not be replaced…

I now have a hint:
As a colleague said, he encountered some problems with usagerights on our fileserver (XServe). He said he wasn't able to read files he put on the server himself again…
If this is true, the same could have happened to Keynote for placed images, as Keynote writes these images as separate files in the doc package…
I will try to work on my local volume and see if it solfes the problem.
But sooner or later I will have to place the whole thing on the server again…
Do you think this is the reason?

Sound Notifications for Missed Calls and Text Messages

Aside from the very small green light in the upper right corner (Bionic) - is there a way to get audio notifications for missed calls and texts? I'm missing a lot of calls and texts because I'm not checking the screen constantly. Thanks!

I am not sure about the Bionic phone specifically but I am pretty sure there should be notification sounds.
My phone, the Droid 2 global has ringtons, and notification sounds separately.
Have you tried looking in the sound settings?

OEM 9.2.0.1.0 - missing Job and Event menus

Similar Messages

Maybe you are looking for