OID or OIM in Oracle Application Server?

Dear all,
How can I know whether I have install Oracle Internet Directory(OID) or OIM (Oracle Identity Management) in Oracle Application Server? How to check?
Best Regards,
Amy

The easy way:
1)
source your ORACLE_HOME evironment
cd $ORACLE_HOME/opmn/bin
./opmnctl status
it will show OID and OC4J_SECURITY components
2) or ldap search command

Similar Messages

Configure OID 10.1.4.0.1 with Oracle Application Server 10.1.3.3

Dear gurus,
I have configured OID 10.1.4.0.1 and MRCA 10.1.4.0.1 on database 10.2.0.3 with Oracle Application Server 10.1.3.3 (HTTP Server and OC4J Server). it went well, i could login into my oid or sso page. then i deployed a simple jar file into OAS 10.1.3.3 and i updated few lines in mod_osso.conf on midtier 10.1.3.3, so it look like this :
==================================================================================================
LoadModule osso_module libexec/mod_osso.so
<IfModule mod_osso.c>
OssoConfigFile /u01/oraias/midtier/Apache/Apache/conf/osso/osso.conf
OssoIpCheck off
OssoIdleTimeout off
# Insert Protected Resources: (see Notes below for how to protect resources)
# Notes
# 1. Here's what you need to add to protect a resource,
# e.g. <ApacheServerRoot>/htdocs/private:
# <Location /private>
# require valid-user
# AuthType Basic
# </Location>
<Location /JABSUAT>
require valid-user
AuthType Basic
</Location>
<Location /HR>
require valid-user
AuthType Basic
</Location>
</IfModule>
# If you would like to have short hostnames redirected to
# fully qualified hostnames to allow clients that need
==================================================================================================
my application faces name is HR, so i called the URL http://devel.sas.co.id:7778/HR/faces/HomeMenu.jspx, the output was sso login page, so i did login with username : orcladmin and password : oracle1 but it turned me error page on browser, it said :
=========================================================
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
=========================================================
and i found that in /u02/oid/Apache/Apache/logs/error_log.1249430400 contains these lines :
[Wed Aug 5 09:13:33 2009] [notice] Accept mutex: fcntl (Default: sysvsem)
[Wed Aug 5 09:13:33 2009] [warn] long lost child came home! (pid 4924)
[Wed Aug 5 09:14:01 2009] [error] [client 172.16.2.14] [ecid: 1249438441:172.16.5.11:5080:0:2,0] File does not exist: /u02/oid/Apache/Apache/htdocs/favicon.ico
[Wed Aug 5 09:14:04 2009] [error] [client 172.16.2.14] [ecid: 1249438444:172.16.5.11:5068:0:3,0] File does not exist: /u02/oid/Apache/Apache/htdocs/favicon.ico
[Wed Aug 5 09:14:24 2009] [error] [client 172.16.2.14] [ecid: 1249438464:172.16.5.11:5093:0:2,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 09:49:36 2009] [error] [client 172.16.2.14] [ecid: 1249440576:172.16.5.11:5074:0:20,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 10:30:01 2009] [error] [client 172.16.2.14] [ecid: 1249443001:172.16.5.11:5096:0:25,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 10:34:13 2009] [error] [client 172.16.2.14] [ecid: 1249443253:172.16.5.11:5102:0:26,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
[Wed Aug 5 10:58:58 2009] [error] [client 172.16.2.14] [ecid: 1249444738:172.16.5.11:5093:0:40,0] File does not exist: /u02/oid/Apache/Apache/htdocs/favicon.ico
[Wed Aug 5 10:59:09 2009] [error] [client 172.16.2.14] [ecid: 1249444749:172.16.5.11:5093:0:41,0] \n[OSSO] E34: Unable to assure integrity of communication with SSO server.\n
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at devel.sas.co.id Port 7782
Note : 172.16.2.14 is my pc and 172.16.5.11 is OID and MRCA's IP, please need your suggestion, Many Thanks.
Regards
Edited by: andes on Aug 4, 2009 9:23 PM
Edited by: andes on Aug 4, 2009 9:28 PM

Dear gurus,
i have solved my problem, i re-run ssoreg.sh and re-configure mod_osso.conf, now it's working.
Regards

Multiple Instances of OIM on same Oracle Application Server

I want to install two instance of OIM on the same machine.
I want to create two oc4j instances on Oracle Application Server 10g Release 3 (Patch 4) and install two separate instances of OIM 9.1 on top of it. Database is on a different machine.
Has somebody done that before?? Is it possible??
Thanks
MS

If you use two different XELLERATE_HOME , and two different ORACLE_HOME for oas it is possible, always you must use different rmi, http, https port for both oas installations.

How to integrate Oracle Portal running on Oracle Application Server 10.1.2

I have an Oracle Portal running on a Oracle Application Server 10.1.2.
Portal is responsible ( along with OID ) for the users authentication and authorization.
There is a new JEE application that was developed recently, which the Portal users must have access to.
HOW can I put a link into a page of the Portal, that redirects the portal user to a new browser window displaying my new application?
HOW can this new application, running in a separate weblogic 11g (10.3.5) server, automatically authenticate with the same username/password previously authenticated when the user logged into the portal?
Any ideas?
I´ve already thought in a bunch of ways to do it:
- put a link into the portal with a sessionId, then when opening the new app, it automatically tries to use the same session. How can I configure this session id during the creation of the portal's page? How can I use it from the new app to use the same session?
- put a link into the portal with a userid, then when opening the new app, it automatically tries to authenticate using a different authentication provider configurated in WL, which points to Portal´s OID. In this situation, how can I ensure that the user is already logged in and the session has not timed out?
- Should I use OSSO?
- Should I use OAM?
Any help would be appreciated!
Murilo

Hi Murilo,
A portletized version of your J2EE app would probably have been ideal for your purpose as it would handle both authentication (through SSO) and session information (through Portal framework as the framework can pass session information to the provider/producer). This would require changes to the application however.
Easiest approach would be to use mod_osso to protect your J2EE application. SSO would then handle the authentication for your Portal and your J2EE application.
Thanks,
EJ

Oracle Application Server 10g Cloning - Urgent

Hello All,
I have been given a new assignment which involves Oracle Applications server 10g, i am new to oracle application server and hoping that some one will please clarify my doubts.
i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?
Eagerly waiting for a reply

user12077492 wrote:
i have to clone a production machine (Solaris 10) which has oracle AS 10g, this machine had oracle database 10g before and just the application server was installed on it, i have to clone a test environment for this machine, i have the following two doubts
1) Is it possible to just install Oracle Application server 10g on a machine which already contains oracle 10g database, if so then what about the database that gets installed when installing Oracle application server 10g.
2) How to clone the above production machine, should the oracle 10g database be cloned first and then oracle application server 10g cloned on the new machine?1) Yes, it is possible. The DB that comes with OAS as the infrastructure DB for it (I presume you are installing a full OAS with infrastructure and midtier both) does not affect the DB you already have on your system ... obviously ... as long as you install them in their separate homes.
2) I always say, this term cloning is somewhat loosely used in general communication meaning making copies. In OAS context, Cloning works for middletiers only. You cannot clone an infrastructure.
To make a redundant/alternate environment for OAS, you can do the following:
- a) either use the same infra on machine 1, and install another midtier and register with the same infra.
- b) or install a separate infra on machine 2, and also a midtier registered with it.
Here for the first option a), Cloning can be used because you can (*only*) clone a middle-tier. There are pros and cons for this setup, including that you share the SSO, and OID, and hence users and groups bases, etc on those two environments - something that you may or may not want. But then there are also some way-outs to avoid them or minimize their effects too. Please see the following reference for cloning and search on Metalink for how to minimize effects, once you get better familiar with the processes.
Oracle® Application Server Administrator's Guide
10g Release 2 (10.1.2)
B13995-08
[10 Cloning Application Server Middle-Tier Instances|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/cloning.htm#BCGBDIDF]
For b), you will need to Stage a server as defined in this reference.
[11 Staging a Test Environment from a Production Environment|http://download-uk.oracle.com/docs/cd/B14099_19/core.1012/b13995/prodtest.htm]
There are some notes on Metalink which address issues about benefits or procedures of Cloning and Staging an environment too.
There are some other ways to export/transport your applications to another instance across DB. Please also read about them.
hope that helps!
AMN

Oracle Application server 10g

Hi:
How to check if our system is Oracle Application Server 10g intergrated? It was asked in a patch readme ATG.RUP.6. this is 11.5.10.2 on unix, 10g rdbms. they have SSO. THANKS
Edited by: user9231603 on Feb 11, 2011 6:37 AM

Hi;
For SSO check note Oracle SSO E-Business Suite Applications Integration with Oracle Business Intelligence [ID 553423.1] part Setting SSO Profiles
For OID check svcname parameter in CONTEXT_FILE.. Details can be avaliable at:
Oracle SSO E-Business Suite Applications Integration with Oracle Business Intelligence [ID 553423.1]
Regard
Helios

Configuring Oracle Application Server to use a user friendly url

Hi All,
I am having trouble configuring the apache httpd.conf file within an applicaton server to be able to use user-friendly urls for the infrastructure identity management tools server. I also need this for security reasons as well as hardware reasons - loadbalancing.
At the moment I have a standard setup, whereby the sso application server is using port 7777. I would like the user not to enter the port, but to enter just a standard url, like http://login.<company>.com.au, so that if the user needs to modify oid using the oiddas web application, they can enter something like http://login.<company>.com.au/oiddas/ rather than http://<machine host name>:7777/oiddas/. This would also be used by portal for sso logins.
From the standard installation, Apache was configured as follows:
Port 7777
Listen 7777
ServerName <machine host name>
DocumentRoot <root document folder>
Now reading the documentation from the Oracle Application Server Installation notes for the Http Server, they document how to do this (in the loadbalancer section - this will eventually be used in the hardware setup):
Port 80
Listen 7777
Listen 80
# Virtual Hosts
# This section is mandatory for URLs that are generated by
# the PL/SQL packages of the Oracle Portal and various other components
# These entries dictate that the server should listen on port
# 7777, but will assert that it is using port 80, so that
# self-referential URLs generated specify www.oracle.com:80
# This will create URLs that are valid for the browser since
# the browser does not directly see the host server.oracle.com.
NameVirtualHost <machine ip>:7777
<VirtualHost <nameofmachine>:7777>
ServerName login.<company>.com.au
Port 80
</VirtualHost>
# Since the previous virtual host entry will cause all links
# generated by the Oracle Portal to use port 80, the server.company.com
# server needs to listen on 80 as well since the Parallel Page
# Engine will make connection requests to Port 80 to request the
# portlets.
NameVirtualHost <machine ip>:80
<VirtualHost <nameofmachine>:80>
ServerName login.<company>.com.au
Port 80
<VirtualHost>
Note that I used slightly different names for the url's rather than the oracle names www.oracle.com and server.oracle.com
Now after applying this, I noticed not only could I not go to the oiddas from the original machine name, but also couldnt go there from the new machine name.
Also I was not even able to go to the standard index page whereby you can go to the enterprise manager for the application server, from either names.
The following urls provide me with "The Page Cannot Be Displayed" error message:
http://login.<company>.com.au:7777/
http://<nameofmachine>:7777/
The following urls provide me with "Page Under Construction" error message:
http://login.<company>.com.au/
http://<nameofmachine>/
Could someone please tell me why this is the case, considering I am using the installation procedures Oracle has published within the Oracle Http Server Admistrators Guide (http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14007/netconf.htm#sthref379).
Cheers
Rodney

Hi Rondey,
Ik think that I can see your probleem.
Just change the following line at your httpd.conf, then restart the component.
First of all if the port is installed with nr. 7777. then the listen process will be on port 7778
the second thing is just try to do the following steps
((Port 80 to Port 7777)))
Listen 7778
%%%% In loadbalancer section %%%%%%
just add the following lines
Listen 80
Listen 8103
Listen 8102
NameVirtualHost *
NameVirtualHost *:8103 or 80
If you want to use this ports (8103 or 8102) for other site (url), then
<VirtualHost *:80>
ServerName <machine ip> or (host name)
Hear from U,
Regards,
Hamdy

Oracle Application Server 10g Enterprise Edition

Hi,
I would like to integrate Oracle E-Business Suite Release 12.1.1 with Oracle Portal.
Idid some research in metalink and found that Note: 376811.1.
What I understood from the doc is,
1. install Oracle Application Server 10g Enterprise Edition.
2. Integrate with EBiz 12.1.1.
Please let me know where can I get the link to download, Oracle Application Server 10g (10.1.4) Enterprise Edition.
Is it required to install OID and SSO before oracle portal installation?
A step by step solution/documentation to integrate 12.1.1 with portal will highly be appreciated.
Thanks and Regards,
DIP

Idid some research in metalink and found that Note: 376811.1.
What I understood from the doc is,
1. install Oracle Application Server 10g Enterprise Edition.
2. Integrate with EBiz 12.1.1.
Please let me know where can I get the link to download, Oracle Application Server 10g (10.1.4) Enterprise Edition.
- download and install OAS 10.1.2.0.2
--> Go to this link: http://www.oracle.com/technology/software/products/middleware/index.html
--> download Application Server 10gR2 (10.1.2.0.2) from the right side portlet of Previous Releases
- then upgrade its portal to 10.1.4:
--> go to metalink/MOS: search for 'oracle portal upgrade master note' and follow the note that matches best
Is it required to install OID and SSO before oracle portal installation?- Yes it is. It will be included in the OAS 10.1.2.0.2 installation
>
A step by step solution/documentation to integrate 12.1.1 with portal will highly be appreciated.
Go to MOS/metalink: search for 'Installing Oracle Application Server 10g with Oracle E-Business Suite' and follow the note
that should be all you need.
hope that helps!
AMN

Oracle Application Server 10g/Oracle Fusion Middleware 11g

Hi folks, This question related to migration/upgrade of Oracle Application Server infrastructure.
I see that the Oracle has come up with Oracle Fusion Middleware 11g. Is it the next release of Oracle Application Server 10g. I have the following questions. Appreciate if any one can provide answers to the following questions. Please correct me if my understanding of these oracle products is not right! Thanks
1. What is the future of Oracle Application Server?
2. Is it Oracle Fusion Middleware(OFM) 11g is the upgrade path if one need
to upgrade?
3. Is it expected that expected that customers need(if require) to move to OFM 11g?
4. Does OFM 10g comes with Oracle Application Server? If not what does
it comes with?
5. If it does not, what about customers having applications built using oracle forms and reports? Does OFG 11g
support Oracle forms and reports?
I understand that OFM 10g comes with Oracle web logic server!
Thanks in advance.
movva

To run Forms and Reports in Oracle Fusion Middleware 11g you have to use the distribution "Portal, Forms, Reports and Discoverer" in the FMW 11g software pack.
The structure of what we used to call "the application server" has changed a bit however, in the following way:
- In 11g you need to install the Javaserver WebLogic software (version 10.3.3 for the current Forms 11g version 11.1.1.3) first.
In 10g the installation of the Javaserver (OC4J) was part of the App server install.
Note that you just have to install the software, the configuration script for creating a Forms app server instance creates the WebLogic domain (comparable with the OC4J instance) for you.
- In 11g the Fusion Middleware software installation is separate from the creation of an application server instance.
This is more convenient and comparable to Oracle database and Weblogic installation.
- The Fusion Middleware Configuration script installs two parts of the product: 1. A WebLogic Domain. 2. A Fusion Middleware instance.
The first contains everything related to Java, such as the servlet configuration file (formsweb.cfg), while the latter contains everything that has less to do with the Javaserver
- No more Infrastructure server
The Infrastructure server does not exist anymore. If you want to use Single Sign On with Forms/Reports 11g you can install Identity Management 10.1.4.3 (or use Identity Management 11g, and configure separately the 10.1.4.3 Single Sign On) or keep your old 10g Infrastructure installation.
During installation you just have to specify you want to use OID and SSO and it configures out of the box.
Under normal circumstances the same licenses apply to 10g and 11g (as long as you do not use WebLogic for other purposes).

Oracle application server 10g and fusion middleware 11

Hi
I am confused about architecture of application server 10g and oracle fusion middleware.
I have installed oracle application server 10g that includes infrastructure tier ( database repository,SSO,OID,DAS,OCA) and mid tier (OC4j,forms,reports,discover,portal,wireless). Here I have totally understood the architecture of 10g application server and Installation method and sequence.
But I could not understand oracle fusion middle ware architecture and components compared to 10g application server.
Now I want to install the oracle fusion middle ware same as 10g application server keep in mind.
can anybody give me high level view of oracle fusion middle ware and it's component? and also difference between 10g app server and fusion.
how can I achieve same thing that i implemented in 10g app server with fusion?
If somebody have architecture diagram of both 10g app server and fusion that will also help me.
Thanks,
Vishal

Take a look at Page 2-1 of the
Oracle Fusion Middleware
Upgrade guide for oracle portal, Forms and Reports and Discoverer
E10130-02
it will give you an idea

10.1.0.5 Patch for Oracle Application Server 10g Release 1

Hi Guys,
Does anyone know what is the patch number for 10.1.0.5 Patch for Oracle Application Server 10g Release 1?
This is a Oracle Application Server and not Oracle Database server.
I tried searching on Metalink but not able to find it.
Thanks in advance!
Avinash.

10.1.0.5 is not a version number for an OAS. It is only a version number for RDBMS.
If you are running OAS 10.1.2.x with the Identity Managmenet/SSO (OID Server), & elected to have it install the Metadata Repository database for you, this was a RDBMS release below 10.1.0.5. The OAS patch to 10.1.2.2 or 10.1.2.3 required the RDMBS be updated to 10.1.0.5 first. This is the standard 10.1.0.5 update for your platform.
use Advanced Search on Metalink
To find the OAS 10.1.2.2 or 10.1.2.3 patch set, search for Oracle Fusion Middleware Server. Release 10.1.2.2 and 10.1.2.3. Look for the decriptions like "PLACEHOLDER BUG FOR AS/DS 10.1.2.3 PATCHSET RELEASE" OR "PLACEHOLDER BUG FOR AS/DS 10G R2 PATCH SET 2 10.1.2.2"
To find the RDBMS 10.1.0.5 patch, search for RDBMS Server, Release 10.1.0.5. Look for the Description containing something like "10.1.0.5 PATCH SET FOR ORACLE DATABASE SERVER"
The patch number is different per platform, so I can't tell you the exact #s without more info (OS)

What are components of Oracle Application server ?

Hello Experts,
I am little confused about Oracle Application Server 10g.
I have done some research to collect the information about the Oracle Application Server 10g.
As for my study, The below are the key components of Oracle Application server.
1. Oracle HTTP Server. (Middle tier component)
2. OC4J (Middle tier component)
3. Oracle AS Webcache (Middle tier component)
4. Oracle AS Portal (Middle tier component)
5. Oracle BI (Middle tier component)
6. OID (Infra tier component)
7. Oracle AS Metadata Repository (Infra tier component)
Does that mean, if I install Oracle Application Server(both the middle tier and infra tier), I can get all the above components ?
If that is right, Are all these components be installed in separate individual oracle home's or in a single oracle home ?
I appreciate any responses.
Regards,
Ravi k

Please see the following note on Metalink for most updated Certification Matrix for the OS, your machine and Oracle AS products.
Note Id: 742649.1
If you are using an AMD 64bit machine, then paritcularly check line 88. If you have an intel, see particularly 125 and 126 to see the relevant patches to be applied before installation of your type of AS software.
hope that helps!
AMN

Fate of Oracle Application Server? Is it going to be obsolete?

Hi all,
What is the fate of Oracle Application Server? Is Oracle going to dump or obsolete it ? Or it will coexist along with WebLogic?
Many thanks.
Omer

Oracle Application Server is a suit of products which includes Oracle HTTP Server, Web Cache, Discoverer, Forms & Reports, Portal, SOA, OiD etc. In the FMW11g release, the Java container (OC4J) has been replaced by the WebLogic engine. I would not say Oracle Application Server is obsoleted :-)
Thanks,
Erik Janssen

Career Opportunity: Oracle Application Server Administrator

RESPONSIBILITIES
The Office of Information Technology at the University of Nevada, Las Vegas is seeking candidates for an Oracle Application Server Systems Administrator. This is a full-time, 12-month professional position. This position will afford the successful candidate the opportunity to get involved in early stages of an exciting new campus-wide portal initiative. The incumbent will be responsible for current and future campus-wide deployment of Oracle Application Server. Job responsibilities include:
* Installing and maintaining a multi-tiered Oracle Application Server environment
* Working with developers to configure, deploy and troubleshoot custom applications
* Implementing, configuring and managing:
- Oracle Portal
- SSO, OID and SSL/PKI
- Oracle HTTP Server (Apache)
- Oracle Web Cache
- Multiple OC4J Instances
- Disaster recovery
The development and enforcement of standards and procedures is required in order to provide the necessary customer support. The position will be responsible for research, development, planning and deployment of new technologies in the Application Server/Portal domain.
The incumbent must be able and willing to perform enterprise system administration tasks as both a primary and secondary responsibility. The existing enterprise server environment includes Sun Solaris, Microsoft Windows 2003, Red Hat Linux, Mac OS X and applications such as Oracle, Lotus Domino / Notes and Web CT. The position requires high ethical standards along with attention to detail, a team orientation and a strong commitment to deliver high quality customer service.
QUALIFICATIONS
Required: Bachelor's degree from an accredited college or university. Must have at least three years of experience in systems and security administration, systems analysis, software version upgrades and implementation on an application server platform.
Preferred: A Bachelor's degree in Computer Science, MIS, or related technical field is preferred. Professional certification and application development / scripting experience is a plus. Although an understanding of the architecture and components of Oracle Application Server (including Portal) and directory services is preferred, training will be provided for an enthusiastic candidate that is willing to learn.
SALARY RANGE
Salary competitive; contingent upon labor market. Position is contingent upon funding with a minimum starting salary of $65,000.
SETTING
UNLV is a doctoral-degree-granting institution with more than 28,000 students and more than 900 faculty members. More than 220 undergraduate, master's, and doctoral degrees are offered. Founded in 1957, UNLV is located on 337 acres in dynamic Southern Nevada. The university is ranked in the category of Doctoral/Research Universities-Intensive by the Carnegie Foundation for the Advancement of Teaching. For more information, visit us on-line at: http://www.unlv.edu.
APPLICATION DETAILS
Submit a letter of interest, a detailed resume listing qualifications and experience, and the names, addresses, and telephone numbers of at least three professional references who may be contacted. Applicants should fully describe their qualifications and experience, with specific reference to each of the minimum and preferred qualifications because this is the information on which the initial review of materials will be based. The review of materials will begin immediately, and will continue until the position is filled. Materials should be addressed to Mike Marchand, Search Committee Chair, and are to be submitted via on-line application at https://hrsearch.unlv.edu. For assistance with UNLV's on-line applicant portal, contact Jen Martens at (702) 895-2894 or [email protected].
Application Information
Contact: University of Nevada Las Vegas
Online App. Form: https://hrsearch.unlv.edu

Hi Fredrik
Thank you for reply.
Answers to your questions
1. I tried reinstalling OAS 10g today.
I did not enter the host name and/or domain name during installation, as it took both Automatically.
I see in config files the host name configured as - myhost.mydomain.com
where actual host name = myhost
and domain name = mydomain.com
I did give the domain name while giving the Global database name as
sid.mydomain.com
2. SSO server login is working.I'm able to login with "orcladmin" user, for url
http://myhost.mydomain.com:7779/pls/orasso
3. See the log statement in the log file at path
F:\OraHome_4\Apache\Apache\logs\access_log.1107475200
=======
[04/Feb/2005:17:23:06 +0530] "POST /sso/auth HTTP/1.0" 302 2061
[04/Feb/2005:17:23:06 +0530] "GET /osso_login_success?urlc=v1.4~BFEFF97197CF25745CAD6C4E3E28976CC7FDE992AB64CDF3E4D12E86CA9398806AD988D7467302868372D7DED508A1CF2F730414E377C9988D17471A089DFFA17B4DA740D43BFF3093300459A796EFE3FECACDA19997201F38C4757C3C9C701351022AA948349B02736B358FF4433F1C6FE6534B265EDFCE349F447EAAD1D2CB0359B9BDE55C9277A391777BF6EB90E1C841A5CCB7BEFAC8BAAB22163D43A707C494704170020F0B0F4D0C90CAB9B6B815447F7B06CBD45E4CDC81B49905E672BFFC47453EDBA968139ED7AF685AEB1A073694CD200415CF49BAB059804F824690527B2FA0D39CE3580FC1B750853D6D5DB3AFB18B04F7B60763CDB9C14786106FA8C1DA9280F50E0C46CE3D8095AE00275008763AC059531394D7E526E83A880B2687659CECDD2C HTTP/1.0" 200 353
======
The error message is same as before.
Do you see any problem in above mentioned info and steps?Waiting for reply.
Thank You

SMTP host for the e-mails in Oracle Application Server 10g

Hi,
I would like to ask in which file from the Oracle Application Server 10g is the configuration for SMTP Host for the e-mails.
Thank you,
Mihaela

Hi Ibrahim,
You can do an easier installation by only using base release of 10.1.2.0.2. What I stated would be good practice:
By * DB 10.2.0.3 ---- > u mean (Database Version) => Yes, use Database version 10.2.0.3
By * Identity Management 10.1.4.0.1 (OID/SSO) -----> u mean (Application Server infrastructure) => Yes, use Identity Management 10.1.4.0.1 instead of the infrastructure on Application Server 10.1.2.0.2
By * Application Server 10.1.2.0.2 -----> u mean (Middle Tire Forms&Report Services) => Yes, use Application Server 10.1.2.0.2 as middle-tier. When installed, upgrade it to 10.1.2.2 (with the latest patchset)
By * Patch Application Server DB client to 10.1.0.5 ----> u mean what? => Before you upgrade AS to 10.1.2.2 it's mandatory to upgrade the Database client software in the Application Server 10.1.2.0.2 home to 10.1.0.5. Default is 10.1.4. You'll see database client version by for instance starting SQL*Plus.
For your Developer (Forms) upgrade: Forms 4.0/4.5 - 6i -> 10g. See: http://www.oracle.com/technology/products/forms/htdocs/upgrade/index.html. If you have tons of Forms, then I recommend using a tool like the great PITTS.CON (http://www.pitss.com/en/pcon/index.htm).
Regards,
Martin

OID or OIM in Oracle Application Server?

Similar Messages

Maybe you are looking for