Oj4632 I can't get the paper device out of my new printer? locked in somehow.

oj4632 I can't get the paper device out of my new printer? locked in somehow. very frustratied

Set the System property "mail.mime.decodeparameters" to "true" to enable the RFC 2231 support.
See the javadocs for the javax.mail.internet package for the list of properties.
Yes, the FAQ entry should contain those details as well.

Similar Messages

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again

Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases.

HT5621 I have changed my AppleID but I can't get the "system preferrences" to show my new AppleID. What am I doing wrong?

I have changed my AppleID but I can't get the "system preferrences" to show my new AppleID. What am I doing wrong? I am running 10.9.2. I support multiple devices on this icloud account and they all work fine. Its just the mac mini ...

I found a post with the answer. Basically I just logged out of the iCloud. My concern was that I would loose my contacts. But when i logged back in with the correct AppleID -- it was all there.
Thanks!

Can't get the attachment filename out of a Part (with non ascii characters)

Hello, all and happy new year :)
My issue is with non ascii filename in attachments... Yes i've read the FAQ : http://www.oracle.com/technetwork/java/faq-135477.html#encodefilename
I can't get the filename out of the BodyPart for those kind of attachments
here's my unit test :
     * contains various parts from various mailer encoded in different ways...
     private enum EncodedFileNamePart{
          OUTLOOK("Content-Type: text/plain;\n name=\"=?iso-8859-1?Q?c'estd=E9j=E0no=EBl=E7ac'estcool.txt?=\" \nContent-Transfer-Encoding: 7bit\nContent-Disposition: attachment;\n filename=\"=?iso-8859-1?Q?c'estd=E9j=E0no=EBl=E7ac'estcool.txt?=\" \n\nnoel 2010\n","c'estdéjànoëlçac'estcool.txt"),
          GMAIL("Content-Type: text/plain; charset=US-ASCII; name=\"=?ISO-8859-1?B?ZOlq4G5v62znYWNlc3Rjb29sLnR4dA==?=\"\nContent-Disposition: attachment; filename=\"=?ISO-8859-1?B?ZOlq4G5v62znYWNlc3Rjb29sLnR4dA==?=\"\nContent-Transfer-Encoding: base64\nX-Attachment-Id: f_giityr5r0\n\namluZ2xlIGJlbGxzIQo=\n","déjànoëlçacestcool.txt"),
          THUNDERBIRD("Content-Type: text/plain;\n name=\"=?ISO-8859-1?Q?d=E9j=E0no=EBl=E7acestcool=2Etxt?=\"\nContent-Transfer-Encoding: 7bit\nContent-Disposition: attachment;\n filename*0*=ISO-8859-1''%64%E9%6A%E0%6E%6F%EB%6C%E7%61%63%65%73%74%63%6F;\n filename*1*=%6F%6C%2E%74%78%74\n\njingle bells!\n","déjànoëlçacestcool.txt"),
          EVOLUTION("Content-Disposition: attachment; filename*=ISO-8859-1''d%E9j%E0no%EBl.txt\nContent-Type: text/plain; name*=ISO-8859-1''d%E9j%E0no%EBl.txt; charset=\"UTF-8\" \nContent-Transfer-Encoding: 7bit\n\njingle bells\n","déjànoël.txt"),
          String content=null;
          String target=null;
          private EncodedFileNamePart(String content,String target){
               this.content=content;
               this.target=target;
          public Part get(){
               try{
               ByteArrayInputStream bis = new ByteArrayInputStream(this.content.getBytes());
               Part part = new MimeBodyPart(bis);
               bis.close();
               return part;
               catch(Throwable e){
                    return null;
          public String getTarget(){
               return this.target;
     @Test
     public void testJavamailDecode() throws MessagingException, UnsupportedEncodingException{
          System.setProperty("mail.mime.encodefilename", "true");
          System.setProperty("mail.mime.decodefilename", "true");
          for(EncodedFileNamePart part : EncodedFileNamePart.values())
               assertEquals(part.name(),MimeUtility.decodeText(part.get().getFileName()),part.getTarget());
I take a NullPointerExcepion in the decodeText because getFileName() return null for the EVOLUTION case, and work well with OUTLOOK, THUNDERBIRD and GMAIL.
Evolution's content type is "Content-Disposition: attachment; filename*=ISO-8859-1''d%E9j%E0no%EBl.txt" wich doesn't look like the other (looks like the RFC 2616 or RFC5987 to do it.)
How can i handle this situation except by writting my own decoder?
Thanks for your answers!
Edited by: user13619058 on 4 janv. 2011 07:44

Set the System property "mail.mime.decodeparameters" to "true" to enable the RFC 2231 support.
See the javadocs for the javax.mail.internet package for the list of properties.
Yes, the FAQ entry should contain those details as well.

I can not get the right frequency out of my NI-DAQ 6062E card from Matlab

Hi.
My name is Johan and I want to generate an analog square waveform with 5.76 kb/s in frequency with my NI DAQCard-6062E from Matlab.
When I run in Matlab the program below, I get the frequency of 5.747 kb/s on the output channel (even thou I have chosen 5.76 kb/s). When I try to change the sample rate, to higher values in Matlab, I get the same frequency until I choose the sample rate to 5.79 kb/s. The output signal is in that case is 5.813 kb/s.
So my problem is that I can't get the exact frequency of 5.76 kb/s.
How do I solve this.
Thankful for help.
Best regards, Johan
Program in Matlab:
clear all
openDAQ=daqfind; %Detect any open DAQ channels
for i=1:length(openDAQ), %Close any open DAQ channels
stop(openDAQ(i));
end
ao = analogoutput('nidaq',1); %Create an object for analog output
addchannel(ao, [0 1]);
set(ao, 'SampleRate', 2*5760); %Here the sample rate is specied. 2*, because to get right samplerate
y=[80,-80] %Sets theoutput values to 80 and -80 (As -1 and 1)
putdata(ao, [y' y']); %Sends the values to out buffer
set(ao,'RepeatOutput',inf) %Repeats sending in infinity
set(ao, 'TriggerType', 'Immediate'); %Choose trigger to immediate, because sending values shall occur driect after start command.
start(ao);
%stop(ao)

Hello Johan!
Bad news I am afraid….
I assume you are using the Data Acquisition Toolbox from the Mathworks and when it comes to support on that interface I have to advice you to contact the Mathworks for assistance. We don't provide any support on their data acquisition interface since we have nothing to do with it.
Sorry for the inconvenience this might cause you.
Regards,
Jimmie A.
Applications Engineer, National Instruments
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal

I can't get the old account out my update

I can not get the old account off even if I sign in on my new account the old still show up and I can't update how do I get the old one out my iPad I tried signing out and in, my new account is in but when I try to update something an old account pops up and I can't do anything

Settings > iTunes and App Store > Apple ID = Sign Out... Then Sign In using the preferred Apple ID.
Dinky710 wrote:
... but when I try to update something an old account pops up ...
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID

I can't get the HP 2600n to show up in Print Dialog

I can't get the HP 2600n to show up in the Print settings.
I've tried to reinstall with the original disk that came with the printer, but it says I have more updated software already on my computer. (i downloaded some drivers from the 'net)
what do I do?

cardigans1,
Could you provide some additonal information so that I may help you with this issue:
OS version number
Sotware version number
Working for HP and here to help!

I Have an older IPod Mini that was synced to a computer I no longer have. How can I get the song on it to a new Library without losing the songs

I have an older IPod Mini that was synced to a computer I no longer have. How can I move the songs on it to a newer library without losing the songs?

iOS: Unable to update or restore

How can I get the third battery out of the wireless keyboard to change it?

I got a message to change the batteries in my keyboard, but only two batteries will come out. Is there a way to get the third one out?

turn your keyboard over-there should be a diagram telling you how many batteries
it takes (2 or 3). If you do have a 3 battery keyboard, perhaps a little wiggling or tapping may help, or a little wd-40, maybe a chopstick?
JB

Can't get the Switch Device Wizard to work - HELP:

currently using version 4.3.0.17 of the Blackberry desktop manager and version 4.2 of the Palm desktop. When I try to use the Switch device wizard, I get to the screen where it asks me to select the software, either the Palm Treo or the Windows Mobile and I can't go any further. I can see the tick boxes but it won't let me select anything and the program doesn't do anything, i.e. no activity. Any suggestions? Has anyone actually gotten this to work? Thanks,
Pat

Hi and welcome to the forum!
Try this link and see if it answers your questions:
http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=6192&query.id=147130#...
Please let me know!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

HT1918 how can i get the first device i put in out and the second one to stay in without time restrictions?

So I've been having an apple account before I got my first and only iphone. But I plugged in my friend's device first into my account and the account read it as the owner device of the ID. Two days later, I plugged in my device and read it as a second device in the accound and therefore, my device is just "borrowing" the ID and it set a time limit to use it. But it needs to be the other way around. The first device is not mine and I want it out, and I want the second device in as the owner of the apple account.
What do I do?
I've already removed the first device,but it still has a time restriction on the second device. THE SECOND DEVICE IS MY DEVICE AND ITS MY ACCOUNT!

"Well, since its the first device into the account, I guess the account read it as the "owner" device of the account."
There is no such thing as "owner" device at all.
"Apparently, the account read it as the second device and thought that it was "borrowing" the account since it was the second device"
There is no such thing as "borrowing" the account. You can use your account from ANY device/computer that has itunes.
You seem to completely misunderstand the way it works.
There is no time limit. You are confucing your account with associated devices:
iTunes Store: Associating a device or computer to your Apple ID
If you want to buy music from your iphone, simply go to Settings and sign into your account.
The musci your friend bought using your account belongs to you and it is not legal from your friend to use.
iPhone User Guide (For iOS 6 Software)

How can I get the DC component out of a signal in Labview

I was trying to get the DC component of a signal using lowpass filters provided by Labview(professional version 8.2). I used the FIR windowed filter but I couldn't get what I expected. The sample rate is 20* the maxium signal frequency. I simulated a function like y= 10(volt)+Sin(2*pi*f*t+phase). If I set the low cutoff to be less than the frequency f, shouldn't I get 10 volt as the outputs? See the attachment for vi. Thanks!
Attachments:
Simulation03062008.vi ‏53 KB

Hi,
You can use the filters located in Signal Processing -> Filters, then create a constant from the "filter type" input and select "Lowpass". There is also an AC & DC estimator vi, located in: Signal Processing -> Measurement.
You may also use something like "running mean" filter. To do it you need to calculate the mean value in some range around every point. It will decrease the value of the noise and will give you the dc value (or slow changing part) of your signal. Finally you can use median filter.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/
Attachments:
meanrun.vi ‏21 KB

How can I get the old version back, because this new is so poor, it doesn't work. My curcor doesn't appeart and can use secont tab.

If I have one tab open and I try to open other, cursor doen't appeart. And If I open youtube I can't write for the search box.
So I want the old version back, how can I get it.

First you'll need to download the old version from here.
http://www.mozilla.org/en-US/firefox/all-older.html
Once you have chosen your language and operating system type then download it from the list on that page.
Next you will have to uninstall the current version of Firefox by using the add/remove programs option under control panel. After the current Firefox has been removed you can then run the installer for the old version. Using this method will not save your bookmarks or any addon's/extensions so make sure you have a list of the addon's you want to get back and you can also backup your bookmarks from within your current version of Firefox prior to removing it.
Do note that some extensions that you may have installed were installed by 3rd party programs and they will not be reinstalled until the program that installed them has been either updated or reinstalled as well.

Itunes Internet Radio. Can I get the URL's out to stream on other units?

I just purchased a SONOS music system. I would like to take some of my itunes internet Radio stations and play on my sonos. I just can't find the URL's for the stations. is there a way to get this info?

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

Oj4632 I can't get the paper device out of my new printer? locked in somehow.

Similar Messages

Maybe you are looking for