Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help
Ok I have an fully upgraded iPad 2 and the volume button don't work but it do with headphones can someone help. I try to go to settings and the volume won't go up there either I have the home button gesture and still the same. I try resting my iPad and nothing no sound work unless I have my headphones in. Do anybody know how to fix this
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore
Similar Messages
-
I have i phone 4 from verizon and the power button is not working
I have i phone 4 from verizon and the power button isn't working anymore, I bought my i phone 8 months ago.
What options do I have and what should I do ?Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay -
HT201412 I have a Ipod touch 4th gen. and the volume button or power off button will not work.
My Ipod touch volume button on the side will not work. Niether will my power off button. I just updated to IOS 6.1.2 and now they will not work. It will not even go to the sleep screen?!!! Help
Try (as best you can):
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Message about iCloud backup and it won't clear. It also won't allow the iPad to do anything else. It is plugged in and now locked. The slides to open iPad and the one to power off do not work. I have the iPad plugged in and have pressed ok on the message numerous times.
Welcome to the Apple Community.
Try restarting the iPad and seeing if that helps.
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again. -
I am having problems syncing the I-Phone ringtones from I-tunes to the I-Phone. These are custom ringtones and they do show up in the I-tunes ringtones and syncing seems to work but they are not on the I-Phone?
1. CC 2014 uses different folder for CEP extensions. If you installed both CC apps and CC 2014 apps, Extension Manager CC will install CEP extensoins to both "~/Library/Application Support/Adobe/CEPServiceManager4/extensions" and "~/Library/Application Support/Adobe/CEP/extensions". Please check if you can find your extensions in the latter folder.
2. Flash based extensions are no longer supported by PS CC 2014. So if some of your extensions are Flash based, even if they are installed to the folder above, PS CC 2014 will not load them. You have to install their HTML based counterparts. Refer to
http://blogs.adobe.com/photoshopdotcom/2014/04/photoshop-spring-cleaning.html , http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html and http://blogs.adobe.com/crawlspace/2014/06/2014-release-of-photoshop-cc-faq.html#plugins -
I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?
You would get better response from the iTunes community forum.
Have a nice day! -
i have an iPad 2 and the volume icon is in the middle of my screen and when i try to turn the volume down it just goes back up again and it makes it impossible for me to play games or do anything
Have you tried giving it a reset? Hold down the sleep and home keys for about 20 seconds. When you see the silver apple let go and let it reboot and see if htat helps.
-
Why am I having trouble loading apps and updates on my iPad? I have closed out all my apps and rest my iPad but still no luck. Can someone help me please?
Try a reset, press and hold both the home and power buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own.
-
IPad 2 Rotation, Sleep, and Volume Buttons Don't Work.
I have an iPad 2 running 7.1.1 (11D201) and just yesterday the sleep sleep and volume buttons don't work, and the screen won't rotate at all. I have already tried the following:
Switched the Lock Rotation/Mute settings in General
Power cycling it
Held the sleep and menu button to reset it (the button worked for that at least)
Done a network reset
Reset All Settings and restored from backup
Reset All Settings and restored from iCloud
Erase All Content and Settings and restored from backup
Erase All Content and Settings and restored from iCloud
If anyone has any OTHER suggestions besides what I've already tried, I am all ears. Thanks.Go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.
-
my ipad with retina eye updated to IOs 7 not able to boot ....the normal way of pressing the sleep/wake button and the home button does'nt work....any ideas i think that IOs 7 is a crap cos form the time i loaded it it was shaky...now my ipad is dead
If it is one year old minus one day it is still under warranty. If it is more than a year since you purchased it then yes, the warranty has expired.
Millions of iPads have been sold. Most continue to function long after their warranty has expired. Check the many requests about updating the iOS on the original iPad on these forums and you'll see that there are many iPads still working after three years. My iPad 2, which I had for over two years is still working well for my son in law who took it over from me when I bought a new one.
Given that there will always be a few iPads that fail early. Most of those will be covered under warranty. But some will fail after the warranty has expired and before the owner expected it to. I'm sorry to hear that you are in this category. Take your iPad to an Apple store and have it looked at. They will provide you with alternatives, one of which is to purchase a like model to the one that failed at a discount. You can then know your options and make the best choice for you. -
I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?
A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing! -
Trying to re-install iTunes and the message "Apple mobile device failed to start. Verify that you have sufficient privileges to start system services." But I don't know what to do? Please can someone help, I'm not the most technologically advanced person.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Hi! I bought my iPhone from USA and the power button doesn't work. I have warranty. I will come to UK soon. I wanna learn; can i benefit my warranty in UK?
The warranty is not and has never been International. Warranty and support are only valid in the country of origin. The only exception is for devices sold in the EU where the EU is treated as one country for warranty and support purposes.
-
I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly. The wireless light is blinking green very quickly and I connect and disconnect from the network constantly. How do I get the router to work properly
Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay -
I have installed Adobe Photoshop CS (original 2003 2004 version) on my new Windows PC. I have been unable to activate it and the note says it will expire after 29 days. What can I do to activate it?
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Maybe you are looking for
-
All of a sudden I can no longer open tabs by clicking "+" or right clicking on the tool bar. To open a new page, I have to open a whole new Firefox window. How can I fix this? Also, Firefox crashes frequently. Is there a fix for this also?
-
How to change font size in the message list pane (showing header lines of messages)
The list of messages at the top of the Thunderbird window (From / Subject / etc.) uses a font that is very small and hard to read. The issue is: How can the user increase the size of the font so that it is readable? The platform is a Mac computer run
-
Add pages dynamically to adobeform
Hi, I need to add pages dynamically to adobeform. For example, i need that a page appears in the final PDF if one table have values, but if table is empty, all of page items should not appear in the final PDF. Can anyone help me ? Best Regards, João
-
Unable tu install and use Adobe Digital Editions
Hi, I tried to install Adobe Digital Editions 4.0 on my Windows 7 pc but it doesn't run... I tried to install the previous version 3.0 but the result is the same... Is possible to install the version 2.0 and where can I find it? Thank for your intere
-
How to handle retention money concept in B1
Hi, My customer using the concept of retention money concept, how to map this in B1. Eg:he want to pay 10000 so 10% is the retentation money:-1000 this one thousend should go to the retention money account. How to map this in B1. Regards, Naresh K.