OLAP variable selection in Infopackage

Hi,
I have a Requirement to load data for the last 14 days everyday,i.e Truncate laod,for that i have crated a userexit variable in Quey designer,that variable picks the data for last 14 days default.it is working fine in query on calday restriction,but that variable i used in Infopackage level for calday selection parameter,but its not working, my cube getting load for all days.Can any one help on this.
Thanks
Naveen.

Hi..
I am not sure if it helps or not.. but in PC there is option wekly and fortnightly...can you try this...
REg
Ram

Similar Messages

OLAP variable in the Infopackage

Hi folks,
I would like to use OLAP variable in the infopackage so I selected Type 7 in the infopackage and selected OLAP variable '0DAT' since I need the current date. By default, the current date is selected as 'From' in the infopackage selection. How can I change this so that
1) the infopackage uses this OLAP variable for the 'To Value' field and not 'From Value' and keeps the 'From Value' blank.
2) the infopackage uses this OLAP variable for the 'To Value' field and manually a date can be entered for the 'From Value'.
Thanks for your help.

Probably not possible via type 7 but possible via type 6
use the code below
data: l_idx like sy-tabix.
data: lower_limit LIKE SY-DATUM.
data: upper_limit LIKE SY-DATUM.
upper_limit = sy-datum .
lower_limit = sy-datum - 1000000. This should set lower limit to a least possible value
read table l_t_range with key
fieldname = 'BUDAT'.
l_idx = sy-tabix.
l_t_range-low = lower_limit.
l_t_range-high = upper_limit.
l_t_range-sign = 'I'.
l_t_range-option = 'BT'.
modify l_t_range index l_idx.
p_subrc = 0.
Whenever you need to change your lower limit you have to enter inside the code and change it.
Regards
Anindya

Variable selection in Infopackage

Hi,
can anybody explain where we can see the InfoPackage selection variable? i mean which table contains this selection variable.
i have checked RSZGLOBV in this table. i have not found that variable.
this is the variable name GET_YESTERDAY.
Regards,
Madhu

Hi ,
In the infopackge >>> Data selection tab ..>>> there for your field some abap routine will be written by debugging that abap routine .. you can find the variable .
check the table RSSELDONE
Regards,
shikha

InfoPackage OLAP variables used in the ZXRSRU01 INCLUDE - I_STEP value ?

Dear All, as I am aware OLAP variables used in InfoPackage Data Selection are processed in the standard user exit (EXIT_SAPLRRS0_001) - INCLUDE ZXRSRU01 where the customer created global reporting variables are also processed when queries are run and are processed according to the value of I_STEP being 1, 2 or 3.
When processing the variables according to the running of InfoPackages the value of I_STEP in this case seems to be 0. Is this always the case for the value of I_STEP = 0 when processing according to InfoPackage?
I have meticulously searched documentation and can only find the I_STEP = 0 value when applied to Authorisation processing.
We are creating separate Includes depending on the value of I_STEP instead of having one great block of code in the ZXRSRU01 Include.
We obviously want the InfoPackage code to run only when the InfoPackage runs instead of it being checked every time a query is run.
Also is there an easier way to see where a customer variable is used:
1) rather than creating a dummy query that uses the variable to restrict a characteristic and using the right click mouse funstion to see where the varaible is used in queries? and
2) also when the variable is used in InfoPackage selection is there a transaction or feature somewhere to see where this variable is used in these selections as opposed to looking at the table RSLDPSEL via SE16 selecting on variable name
i.e is there a nice "where used" feature that shows comprehensively where a customer user exit variable is used across the board.
Thanks
Mark

Hi Sarah,
You don't need any FM for your issue.
Please try thie sample code :
DATA: VAR_INPIUT LIKE RRRANGEEXIT.
CASE I_VNAM.
WHEN 'ZVAR2'.
   CLEAR L_S_RANGE.
   IF I_STEP = 2."PROCESSED AFTER VARIABLE INPUT
*Reading value of ZVAR1
    LOOP AT I_T_VAR_RANGE INTO VAR_INPIUT
      WHERE VNAM = 'ZVAR1'.
      CASE VAR_INPIUT-LOW.
*FILLING ZVAR2
       WHEN 0.
          L_S_RANGE-LOW     = 10.
       WHEN 1.
          L_S_RANGE-LOW     = 20.
      ENDCASE.
      L_S_RANGE-SIGN     = 'I'.
      L_S_RANGE-OPT      = 'EQ'.
      APPEND L_S_RANGE TO E_T_RANGE.
      EXIT.
    ENDLOOP.
ENDIF.
ENDCASE.
Hope this helps
Joe

Step by step OLAP variable for Infopackage

Hi Experts
I have been thru all the threads but am still not clear how to accomplish this. I am not an ABAPer so am trying to do this in Bex.
I am in BI 7.0. I want to create an OLAP variable for 0CO_OM_CCA_9 infopackage to select all cost centers for one 0comp_code.
I've tried creating a query as well as variable but I can't seem to get it to work.
I think the problem is all of the various possibilities of Settings in the variable creation i.e. Processed by, repalcement path, etc
Thanks very much for your help !

Thank you very much Sven ! This is exactly what I needed.
I have a couple of additional questions.
Do I use the variable in this query somewhere or just create it on the Cube?
For Replacement Rule do I choose query and use the query I've just created or choose variable ?
I have done this with query in replacement Rule and I can't see my variable in the list for selections in my Infopackage.
Thanks for your help
laura

Olap variable in infopackage

SDN,
My question is the OLAP variable used at infopackage levl.
Is that variable got entry when queri runs or from where it gets value?
I didn't understand this I'm just confused in this regards.
why olap variable(BEX varialbe ) at ip level
pls could anybody clarifies this to me?
thx
r

Hi,
this field is to used to populate date range field dynamically
suppose u r loading any particular infopackage weekly for previous weeks data (monthly or daily) then u can use option 1 (2 or 0).
http://help.sap.com/saphelp_nw04/helpdata/en/e1/b7463c32a3fe13e10000000a114084/frameset.htm

Creation of an OLAP variable

Hai All,
I need to create an OLAP variable in an infopackage for an object for picking up data from last two months. I mean to say that the object has to pickup all the data pertaining to the last two moths only from the system date without any manual intervention. I see that there is an option in info package where I can select 7-OLAP variable and another option ABAP program. Which one of these is a good way and how to doit? any advise or also any reference to documentationwill be appreciated.
Thank you very much.
Message was edited by: vasu vasu

Hi Vasu,
> I already created a
> variable giving an offset but its not showingup in
> the list of OLAP variable showed in the info package.
> Is there any other place where I need to do this?
I experienced the same problem. My solution was to edit the variable and deselect the 'ready for input' option. Also the variable has to be a SAP- or customer-exit variable so that it can run as a background job.
Best regards,
Christian Frier

Variables available for InfoPackage

Hello Gurus;
Currently in one infopackage, as option to filter the Fiscal Year I use the standard variable 0FYEAR that is defined as SAP Exit.
This works fine.
However, I now want to add the previous fiscal year.
I add from the Business Content the variables 0P_FYRL and 0I_FYRL. They are available in reporting, but not a option to select in OLAP variable in the InfoPackage.
Does anyone know how to add them in the infopackage?
Thanks in advance,
Regards;
Ricardo

Hi,
Please check the thread below:
olap variable
-Vikram

Infopackage Selections Tab-OLAP Variable/ABAP Routine

Hi Experts
In my Infopackage Selections Tab i had Cal Mon/Year field....
As per my requirment i have to write a selection condion that when we execute info package (it is a monthly data load) it will extract data only for the months greater than or equal to current month
Please update me on how can i achieve this either by using OLAP Variable or ABAP Routine in infopackage...will be great if can provide the required ABAP Code
Thanks in Advance

here's an example that fills the fiscal year from last month (bold is customer code... the rest is standard):
data: l_idx like sy-tabix.
read table l_t_range with key
       fieldname = 'PARAM_P_GJAHR'.
l_idx = sy-tabix.
data:
v_caldy type /BI0/OICALDAY,
v_calmn type /BI0/OICALMONTH,
v_calyr type /BI0/OICALYEAR.
v_caldy = sy-datum.
determine first day*
v_caldy+6(2) = '01'.
determine last month*
subtract 1 from v_caldy.
v_calyr = v_caldy(4).
l_t_range-sign   = 'I'.
l_t_range-option = 'EQ'.
l_t_range-low    = v_calyr.
modify l_t_range index l_idx.
p_subrc = 0.

OLAP Variable with user exit for Infopackage Selection 0fiscper

Hi Frds/ Guru's ,
I have a requirement to use a OLAP Variable for Fiscal year period 0fiscper(Characteristic ) in the Infopackage Selection. . I need to extract the data for Previous Year and Current Year , that is to be automatically selected with a OLAP Variable . The standard one's provided by SAP are not satisfying my requirement,as they are getting populated with SAP Exit and I am not getting the ranges .I am planning to create a variable and use the processing type as Customer Exit and Populate it with ABAP code in respective Enhancement RSR00001.
Even Can I create a ABAP Routine ? Please suggest me which is better to do in respect to performance of dataload , will be really glad if anyone can provide some code for doing this as u might have faced the situation sometime .
I have checked with all the threads available , could get some idea but will be really thankful if u gimme some hints in writing the code , at Exit level and routine level .
Thanks,
Krish

thnx

InfoPackage selection offset with OLAP variable

Hi Bw Gurus,
I have a requirement to load ODS with full upload everytime but in order to reduce repeated loads I am trying to use a DATE field which is not part of communication str. as a selection critera in InfoPacakge.
I changed DS to include this field avaialable for selection and It's working fine when I input date to and from values hard coded in InfoPackage.
Further I am trying to automate this InfoPackage scheduled weekly and I need to include date offset value for this DATE field to load for additional last 2 weeks every time to capture changes for already loaded data.
I have created OLAP customer exit variable having Date interval for Date starting from last 3 weeks to Current DAte and included in InfoPackage selection for DATE field but it's not working. By the way if someone can explain what's meaning for two columns there for TYPE(Variable change to selection.....) and detail for type.
Any clue for reason or any other way to accomplish this requirement?
Thanks in advance,

hi,
can you explain me ,hw you solved the pbm,
the same pbm i am facing.
i am trying to load the data everyweek ( i have date field ),so i have selected OLAP Variable option -7 and there i have selected 0WEEK,but data is not comining from R/3,then i have selected the option -6 abap code,i have written code to get the date range,even though i am not able to retrive the data.
can you suggest me
Thanks
Madhu

Can't find 0FYTLFP OLAP Variable in InfoPackage Data Selection tab on 3.5

On BW 3.5, when generating an InfoPackage with the datasource as Purchasing Data(80PUR_C01), under Data Selection tab, for the InfoObject 0FISCPER, I selected 7 (OLAP variables)for the Type column, then click the button next to it and under the column of Details for Type to bring up a window, but when expending the OLAP Variable field list, can't find the following value in the list which shows up on BW 3.1:
0FYTLFP     0FISCPER Cumulated to Last Fiscal Year/Period (SAP Exit)
How to make the above value show up in the OLAP Variable list?   I thought maybe the variable 0FYTLFP needs to be installed in Business Contents, but there is no variable object type in Business Content. It sounds like a SAP Exit, but how to make the SAP Exit value show up on BW 3.5?
Thanks for everyone's input!

hey Rohit,
Besides the three variable values in the list on BW 3.5, now I find a new one in the list, called "0E_ROLE     0SR_ROLE     Role (SAP Exit)", I have no idea why this one shows up now. Now all the four variables in the list are:
1. 0CML12LM     0CALMONTH     Last 12 Months Excluding the Current Month
2. 0CMONTH     0CALMONTH     Current Calendar Month
3. 0E_ROLE     0SR_ROLE     Role (SAP Exit)
4. 0S_RQMRC     0REQUID     Most Current Data
0FYTLFP is still not in the list!   We can't try to create BEx query since our BW 3.5 system is just installed and we have not got to the step to ceate a query. I try the 2nd way you suggested by pressing F6 on this variable with the typed in value 0FYTLFP, get the following msg "BEx variable 0FYTLFP could not be evaluated - No error message", that means it would not work on BEx query as well, right?
What could be the reason that we can't see 0FYTLFP variable in our new installed BW 3.5? Do you think our BASIS missed installing sth?
Thanks
Message was edited by: Kevin Smith

OLAP Variable in DTP - Not able to save the selection

Hi Guru's
We are on BI 7.0 and supportpack 13. I am facing an issue with the OLAP variable in DTP filter . I am not able to save the selection/filter within DTP via OLAP variable. I am able to test the values of the OLAP variable within DTP screen (just like in infopackage) , but when i save it, it does not appear in the selection.
Have any of u faced this issue? I searched for SAP notes , but could not find any matching this issue. Could u please help?
Thanks & regards

Hi Voodi,
Thanks for ur response. But i have checked that too. I am not saying that the value need to appear in selections screen. The filter in DTP is not showing a check tick mark and also no variable is found even though i had saved it and activated the DTP.
I also checked running thisDTP and checked the selections in the header of the monitor. No selection is shown there.
Thanks

OLAP Variable for Filter Selections in DTP

Hi
In BI 7.0 DTP i am using a ZZ OLAP Variable for a Filter on Location.
How/Where i can check the values defined for that OLAP Variable and if i want to update that selection with few new values
Thanks

Hi,
Please check the threads below:
Re: Infopackage - ABAP routine or OLAP variable
Re: How to create OLAP Variable in DEV
Re: Infopackage - ABAP routine or OLAP variable
Re: creation of OLAP Variable
-Vikram

Creating OLAP variables for infopackages

Hello Gurus,
I am interested in creating an "z" OLAP variable and then use in the DATA SELECTION in the infopackage,
Where can I create the same?
Thanks in advance.

Hi,
The following links will be very helpful for you.
Step by step OLAP variable for Infopackage
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a05ac9fa-f44c-2c10-dbb8-ef54c102707c?quicklink=index&overridelayout=true
Regards,
Kush Kashyap

OLAP variable selection in Infopackage

Similar Messages

Maybe you are looking for