OMF sample position error!

I have just imported a project as OMF on several channels. Originally, it has the start position 1.3.1.0. The song needs a Reason-loop/file. Logic doesn’t "see" this position and places the files to a 1.3.1.1 starting point. The Reason-files start as normal on 1.3.1.0. This is not good enough and the ReWire-files and "live" files are off beat. I have tried to fix this both in the transport area and in the Event window, but when I type in 1.3.1.0, Logic automatically changes this to 1.3.1.1.
Please help!!!

Hi Jeff,
I have a few questions for you to help me get a better understanding of the issue:
- What version of LabVIEW software is your application written in (2010? 2011 SP1?, 2012? etc)?
- Have you tried swapping your motor with a different one? Or your Drive? Did you still observe the same behavior? If possible, I think this would be a useful test to help narrow down the issue.
- What does your motion system look like at a high level (What components are involved and how are they connected to eachother)? Does the encoder feedback connect back to the drive or back to your cRIO controller?
Andrew T.
National Instruments

Similar Messages

Invalid Cursor Position Error

Help!
I am using JRun3.1 and developing a web interface to a database. In this particular screen, I am using CachedRowSet (I downloaded this and added it to jrun classpath). I am getting "Invalid cursor position" error.
I feel there is a problem with the usebean tag.
This is my code:
what is wrong with this?
<%@ page language = "java" import="java.sql.*, java.util.*, javax.sql.*, sun.jdbc.rowset.*" %>
<%
String indSub = request.getParameter("indSub");
String areaname = request.getParameter("selarea");
%>
<jsp:useBean id="crs" class="CachedRowSet" scope="session" >
<%
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
crs.setUrl("jdbc:odbc:asphData");
crs.setCommand("SELECT siccode, sicdesc from siccode where sictitle = '" + indSub + "'");
crs.execute();
%>
</jsp:useBean>
<%@ include file="header2.htm" %>
<link rel="stylesheet" href="http://localhost:8100/empData/almis.css" type="text/css">
 
 
<table align="center">
<tr><td class="moduleDesign" align="center">Employers Database</td></tr>
</table>
 

<form action="employerDetail.jsp" method="post">
<center>Employers in the �<%= indSub %>� Industry
 
SIC Code:�<%= crs.getString("siccode") %>
 State: Utah 
Region: �<%=areaname %> 
</center>

Description:�<%= crs.getString("sicdesc") %>

</form>
<jsp:include page="footer2.htm" />
</body>
</html>
srajaman2

Never mind!
I have to issue a next() command to get to the first line of the resultset!
srajaman2

Invalid Cursor Position Error on Windows XP using CachedRowSet

Hello, I don't know if this question lies here, but I thought it would be the well suited place so please pardon me if it isn't. I am trying to access multiple pages from my database on my XP machine but I am getting an "invalid cursor position" error when trying to access the next page. I don't know how this error is coming about because it works well on a Vista machine with no errors. I don't know if it is my drivers or something that brings about the problem. I am using mysql connecter 5.1.10, JRE 1.6.0_02 and windows XP SP2
Below is a simple code that brings the error.
package Admin; import javax.sql.rowset.CachedRowSet; import com.sun.rowset.CachedRowSetImpl; public class test { public void table() { try { CachedRowSet crs=new CachedRowSetImpl(); crs.setUrl("jdbc:mysql://host:3306/database"); crs.setUsername("User"); crs.setPassword("password"); crs.setCommand("select * from myTable"); int[] keys = {1}; crs.setKeyColumns(keys); crs.execute(); crs.last(); if(crs.getRow()>500){ //new overLimit(); } crs.setPageSize(3); crs.execute(); while (crs.next()) { System.out.print("page one----"); System.out.println(crs.getString(1)); } while(crs.nextPage()){ System.out.println("page two---"); while (crs.next()) { System.out.println("in page two"); System.out.println(crs.getString(1)); } } } catch (Exception e) { e.printStackTrace(); } } public static void main(String []args){ new test().table(); } }

Yes I am running the same code on both machines. The output I get on the XP machine is shown below. I modified the code I posted earlier and replaced the "page two" text with "page (then page number)" and also omitted the "in page two" text for better readability---------PAGE 0---------
DB09140110
DU35463010
EX29201810
---------PAGE 1---------
EX38341510
EX40471810
KZ280299
----------PAGE 2---------
LA130299
LC130299
MC081009
----------PAGE 3---------
RZ300502
VA130299
VI020209
----------PAGE 4---------
YX101008
ZE220299
ZF231105and vista....
----------PAGE 0---------
EX38341510
EX40471810
KZ280299
----------PAGE 1---------
LA130299
LC130299
MC081009
----------PAGE 2---------
RZ300502
VA130299
VI020209
----------PAGE 3---------
YX101008
ZE220299
ZF231105

Why am I getting midi conflict/sample rate errors. GarageBand 10 intel mac

Why am I getting midi conflict sample rate errors with no connected midi device?

Ok, I'll answer this myself. It has nothing much to do with midi devices being in conflict with anything. Nothing much to do with midi devices, as such, in fact. What it seems to be is a slow running system, whether it be processor, or hard disk, or whatever. In fact, when I found the cause of the problem, it was easy to solve.
What I saw a few times throughout this episode, was an inacurate sample rate report, which caused Garageband to run and react slowly, causing stuttering and flutter in audio output, so that noises were produced as the program struggled to handle the data streams it was reading and trying to reproduce and output cohesively. All of that was caused, it seems, by my iMac overworking and getting a bit too hot for comfort, having run all day, and multitasking for a good deal of it. I didn't adjust I/O buffering, or take any of the usual 'advised action' I've read from other users.
I simply saved my work and shut down the machine for an hour or two. When I restarted the machine, all had returned to normal. The lesson is, it seems to me, is minimise, or, stop other tasks the machine is carrying out. Safari, in particular, seems to be a major drain on resources, so work without it running. Shut down all unecessary programs and tasks, and run Garageband alone, when working in it. Garageband is a much tamer beast when it's left alone to do what you ask of it. It's quite a sensitive little soul. :-)

Position error

I am having encoder position issues.
I am using 3 Kollmorgen servos attached to 3 AKD Ethercat drives. I have a cRio running as the Ecat master. All of my Vis are running in scan mode on the cRio.
I am building a capstan pulling system that will have a constantly changing velocity based upon position within a 3 meter repeating cycle. I change the velocity based upon sensor input every mm of the cycle and then start the 3 meter cycle over. The velocity various from 1 RVS to 10RVS. I use the encoder position to determine my position within a cycle. The system runs great for around 5 minutes and then my encoder goes crazy. Even when I stop the servo the encoder continues to increase. In the help for the “Reset Position” command I noticed that encoder values higher than 2^52 can be unstable. Does this apply to user units or RAW encoder pulses?
I have tried the following methods to try and fix the problem.
Test and verified that the issue occurs in the Axis test panel.
I just set a long move at a given speed. After a time the position error goes crazy as in 4.0 e +12 and the position continues to increase after the servo stops.
I removed my units and used just encoder pulses and again after a few minutes the same thing occurred.
Changed my VI so that after each 3 meter cycle the encoder was reset to zero. Again after roughly the same amount of time the issue occurred.
One strange thing is that I can still control the servo accurately. If I tell it to go 100mm it goes 100mm, but once there I cannot read the position because it returns a very large and inaccurate number.
A further observation is that I can recover by resetting the cRio. This makes me think that the encoder number is exceeding some register U32 or U64. If that were the case I would have thought that resetting it after each cycle would have fixed it. Unless when you reset the position you are just setting an offset that is subtracted for the actual encoder from that point forward.
I am sure that I have confused you all but any and all help is greatly appreciated.
Perpetual LabView noob…..
Jeff Lee

Hi Jeff,
I have a few questions for you to help me get a better understanding of the issue:
- What version of LabVIEW software is your application written in (2010? 2011 SP1?, 2012? etc)?
- Have you tried swapping your motor with a different one? Or your Drive? Did you still observe the same behavior? If possible, I think this would be a useful test to help narrow down the issue.
- What does your motion system look like at a high level (What components are involved and how are they connected to eachother)? Does the encoder feedback connect back to the drive or back to your cRIO controller?
Andrew T.
National Instruments

"Column Width should be positive" error

I have a flash chart that has a fairly simple query (whic works fine when run via SQLPLUS etc), that when I run via Apex I get "Column Width should be positive" errors. What does this mean, and how do I debug it?

I realise that I have to have a chart query to generate the chart. The query (see below) runs perfectly fine in SQLPLUS, TOAD, SQL Developer etc, with no negative values returned.
select null, to_char(targcompdate , 'RRRR-IW'), count(*)
from work_tab
where worktype = 'RO'
and integ_priority in ('2','3','4')
and comp_person = 'Structural'
and targcompdate >= sysdate
and status = 'APPR'
group by to_char(targcompdate , 'RRRR-IW')
order by to_char(targcompdate , 'RRRR-IW')

I try to run oracle sample,but error appear ,how can i avoid the error

after installing database and sample,i tried to run the sample ,but error appeared
D:\app\yu\product\11.2.0\dbhome_1\OCI\samples>bcmake.bat
Please set environment variable BORLAND_HOME
how to get borland compier?
why used borland compier? i think most developer use visual studio .
please tell me how to compile the given sample by oracle?
thanks
Edited by: user12070477 on 2013-5-8 下午8:44
Edited by: user12070477 on 2013-5-9 下午8:20

Check this support document for update and restore errors. Resolve iOS update and restore errors - Apple Support
Looks like that can be a hardware error, but go ahead and follow the other steps in the document.

JBUILDER5 :"sample.java": Error #: 750 : initialization error: com.borland"

Hi there,
I am trying to compile a few sample with new release of jdk1.4.0. It does with DOS-Promt. I get an error like ""sample.java": Error #: 750 : initialization error: com.borland.compiler.symtab.LoadError: class file has wrong version 48.0" when I try it with Jbuilder5. Any idea to work around this is apprecited.
Thanks
SY.

Forget employing jdk 1.4 with JB 5, it dosen't support it; too many changes in the jdk. If you want to employ it you'll have to undate to JB 6.0. Sorry.
Abraham.

Wait for Next Sample Clock error, or 'How do I put this VI on a diet'?

Hello!
In the attached VI I've been running since June, I have all the functionality I need. No questions there at all, thanks to much time and help from this board!
My nagging problem is that any time I use the PC for other minor tasks other than Labview, it will display the following error:
209802 occurred at DAQmx Wait For Next Sample Clock.vi:1
A search earlier in the month indicated that it could have been a result of my old and outdated PC; I've since replaced it with a brand-new dell dimension 1100. Celeron 2.53ghz with 1.00gb of ram. Should be enough to service Labview and other minor tasks (automatic antivirus updating and also maintenance tasks). However, any time any other program opens or even if the screen is scrolled around on Labview quickly, I get that same error.
Resource usage when idle, with nothing but this VI running is 5-10%, all labview. Upon scrolling the VI, it quickly jumps to the 58-60% and above mark and soon throws that error.
I know that there's a lot of code here that can be cleaner--I know that even though it's functioning correctly, there could be a less resource-hogging way to go about it. Can anyone give me any suggestions on how to make this VI a little 'lighter'?
Thanks so much in advance,
Ralph
Still confused after 8 years.
Attachments:
Currently Running 063006.vi ‏899 KB

Hi Ralph,
The wait.vi waits until the amount of time has passed. While the wait on next ms.vi uses some kind of quotient and remainder on the computer time until the remainder passed zero.
In this way you can synchronize 2 loops, and somehow it is less time-consuming. The only difference you will see is in the first run!
There you see a smaller amount of time:
Message Edited by TonP on 10-04-2006 04:21 PM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
Example_BD.png ‏2 KB

BPM Simple Sample Application Error!!!

hi,
i have some problems with the bpm simple sample applications on our local sap nw ce system (7.1 ehp1 sp0)?
on the esworkplace i have download the *.sca file and have import this file into my nwds.
i following the simple sample documentation an define and configure the ERP and ERP_META Destinations on the nwds and our local sap nw ce system.
also i do the future steps which was described (service registry, proxy settings, ...).
on page 16 of the simple sample documetation is defined which Sofware Component has dependencies to other SC´s.
the SC "BPEM_BUILDT" depends on the SC "ESMP_BUILDT" and "COMP_BUILDT", the SC "COMP_BUILT" doesnt exist on my nwds (7.1 ehp1 sp0).
has everybody any idea why the SC "COMP_BUILT" not exist on my nwds???
still this absent SC i can deploy the bpm simple sample successful to our sap nw ce system.
now i do the post deployment steps for the bpm samples.
after this i call the simple sample application on my sap nw ce portal and can execute the "Initiate Equipment Phase In Process".
now i can see a new entry on my uwl, i open the uwl task.
at step 1, 2, 3 i change no data an click next, after step 3 (create equipment) i get the following error:
com.sap.esi.esp.service.server.query.discovery.ExtendedServiceException: no endpoints found for interface 
IndividualMaterialERPCreateRequestConfirmation_In_V1 
 
detailed error message: 
com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for WS metadata 
destination 'ERP_META' and WS interface 'IndividualMaterialERPCreateRequestConfirmation_In_V1'. One possible reason is that
Caused by: com.sap.esi.esp.service.server.query.discovery.ExtendedServiceException: no endpoints found for interface
IndividualMaterialERPCreateRequestConfirmation_In_V1
at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImplSoa.getEndpointConfigurations(DestinationsHelperImplSoa.java:1184)
at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImplSoa.getWSDLUrl(DestinationsHelperImplSoa.java:847)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.getWSDLUrl(GenericServiceFactory.java:547)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService_NewInstance(GenericServiceFactory.java:377)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:230)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:195)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:529)
... 82 more
after this error i test the endpoint manually. i call the service registry (sr.esworkplace.sap.com) an search the service:
IndividualMaterialERPCreateRequestConfirmation_In_V1
now i test the endpoint with the following data:
MaintenancePlanningPlantID: 0001
WorkCentreID: TECH.SER
CategoryCode: M
the return is the following:
TypeID:005(PLM_SE_EAM_SC)
SeverityCode:1
Note:Individual Material 000000000010006703 is created
i think the return from the service was successful.
i hope somebody can help me!!!
thanks,
Fabian

Hi Arafat,
the destinations for the services are already configured::
at destination template management > destination templates the following is defined:
- Tab: General
Destination Name: ERP
Destination Type: Service Registry
System: ABAP
System Name: HU2
Hostname: iwdf2379
Installation Nr.: 0120003411
Client: 800
- Tab: Security
Authentication: HTTP Authentication, User ID/Password (Basic)
User ID: <es workplace user (suser)>
pw: ******
and
- Tab: General
Destination Name: ERP_META
Destination Type: Service Registry
System: ABAP
System Name: HU2
Hostname: iwdf2379
Installation Nr.: 0120003411
Client: 800
- Tab: Security
Authentication: HTTP Authentication, User ID/Password (Basic)
User ID: <es workplace user (suser)>
pw: ******
also i have configured the same destination on my nwds.
i think this is correct?
futher ideas, why this doesnt work?
thanks,
fabian

Cairgorm 3 sample applications - errors in unit tests

After the last update the sample applications started to work - they now even show images.
But the unit tests for Commands are reporting errors on my machine:
TypeError: Error #1034: Type Coercion failed: cannot convert []@56443a9 to XMLList.
at asmock.integration.flexunit::ASMockClassRunner/withBeforeClasses
at org.flexunit.runners::ParentRunner/classBlock(ParentRunner.as:221)
etc...
As I am just starting to explore unit testing, I do not know how to debug it.
Can someone help me?
Thanks, Zdenek M

Hi,
Could you confirm that you are running the unitTests using the InSyncBasicTestRunner.mxml? Also make sure that you don't have another version of FlexUnit4 on your classpath (Project->Properties->Flex Build Path) as the one shipped with the latest version of Flash Builder may conflict with the version of ASMock we are using at this time.
Let me know if you are still experiencing issues with the test suite.
Best,
Nicolas

Sample Adapter - Error in NWDS for import stmt of class PermissionMode

Hello,
I downloaded the latest code of Sample Adapter from the SAPNote 1004000.
I am trying to build the code in SAP NWDS. I am getting an error for the import statements -
import com.sap.aii.security.lib.KeyStoreManager;
import com.sap.aii.security.lib.PermissionMode;
I looked into the jar for the package com.sap.security. There is no 'lib' folder inside this. These two class are also not in any of the folders and subfolders in this package.
Now for the KeyStoreManager Class, I found a jar sap.comtcjekeystore_apiAPI.jar which contain a class by the name of KeystoreManager in the package com.sap.engine.interfaces.keystore.
1. Is this KeystoreManager the same class file as KeyStoreManager?
2. In which jar can I find the class PermissionMode ?
Best Regards,
Neeraj
Edited by: Neeraj Kumar on Aug 20, 2009 10:44 AM

Hello Neeraj,
Now as I mentioned earlier, when I go to com.sap.aii.security package in the jar com.sap.aii.sec.svc_api.jar there is no 'lib' folder. Also there is no security.class in any of the subfolders in com.sap.aii.security .
- In PI7.1 security.class is in folder ext, check whether you can find the folder ext.
- Your SampleAdapter has already implementation code in it, as you mentioned in the source there are import statements, so the point to focus is to make your source error free, after compile.
- In case you have the sap.comtcsecssfcore.jar added to your build path, try to reimport the two classes, still if it show error try to close and open your module project.
Regards,
Prasanna

Invoking sample processes errors

Hi,
I am having trouble invoking some of the sample processes delivered with the application. For instance, the Dynamic Document Generation example and even the very simple looking Variable Logger example throw an endpoint invocation error when I try to run them from Workspace. Does anybody know what the cause of such an error would be? Also, are all example processes meant to be started from Workspace in general?
Thank you.

They're not all meant to be started from Workspace. The one thing you need if you want to start a process from workspace is a form to display. So if the process doesn't contain a variable that can contain a form like Form, xfaForm, DocumentForm and is set to be IN, then the process won't start properly in workspace since there is nothing to show.
Jasmin

Class mapping sample code error

Hi !
There is an error in a Developers guide mapping sample code: p.156-157.
(Examples 7.11,7.12 and 7.13).
For example, in 7.12 we have:
<class name="Tabloid" persistence-capable-superclass="Magazine">
<extension vendor-name="kodo" key="jdbc-class-map" value="flat"/>
.... indicator extensions ...
.... field metadata ...
</class>
instead of jdbc-use-class-map in the key attrribute of the extention tag.
Please, fix it.
Best regards,
Alex.

Actually the sample is correct. It shows the mapping information if you
are using metadata extensions in place of .mapping files. To map a class
via metadata extensions, you use the "jdbc-class-map" extension key.
This is distinct from the "jdbc-use-class-map" key, which you can use to
tell the mapping tool what kind of mapping it should create. So in sum:
jdbc-class-map: Used at runtime by the MetaDataMappingFactory to map a
class to its schema.
jdbc-use-class-map: Used at dev time by the MappingTool to indicate that
the user wants a specific type of mapping to be installed.

Set file position error

Hi,
I am using LabVIEW 2009 SP1 on Win XP OS system. I am reading and writing data to a text file whose size does not exceed 50 MB. whenever i try to set file position to a value of say 128 bytes from the start of file, the function does not show an error. But when i try to read back the file position using get file position function, the value shows a very high number. I am not able to do a random access read of the file data. Please help.
Regards,
Yashasvi

Hi Yashasvi,
can you post the vi (or vi section) causing the problem?
Thanks,
Marco

OMF sample position error!

Similar Messages

Maybe you are looking for