Omp_error ** while attempting to see the demo results of mvdemo
hello,
i use oracle 10g enterprise edition.
i am new in oracle spatial. i want to start with examining the demo which includes some state maps and relational knowledges about USA. for that, i created the user mvdemo/mvdemo, i imported the necessary dump file into my database named mvdemo.dmp. when i want to see the demo results on mapviewer, i see an error below. i am also new in XML. the code sample and its result like this:
CODE:
List all the themes in a data source that are part of a map:
<?xml version="1.0" standalone="yes"?>
<non_map_request>
<list_predefined_themes data_source="mvdemo" map="DEMO_MAP" />
</non_map_request>
RESULT (ERROR):
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<oms_error>
Message:[oms] eÅleme verileri kaynak tanımı bulunamadı.
Fri Feb 25 11:17:40 EET 2005
Severity: 0
Description:
at oracle.lbs.mapserver.core.MapperConfig.listPredefinedThemeNamesScales(MapperConfig.java:1497)
at oracle.lbs.mapserver.MapServerImpl.listPredefinedThemesScales(MapServerImpl.java:582)
at oracle.lbs.mapserver.oms.listPredefinedThemes(oms.java:1814)
at oracle.lbs.mapserver.oms.doPost(oms.java:477)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
</oms_error>
if someone could answer, i would be greatful.
best regards
i did not use the administration page. i edited into the mapViewerConfig.xml and changed some parameters.
original configuration:
<!--
<map_data_source name="mvdemo"
jdbc_host="elocation.us.oracle.com"
jdbc_sid="orcl"
jdbc_port="1521"
jdbc_user="scott"
jdbc_password="!tiger"
jdbc_mode="thin"
number_of_mappers="3"
/>
-->
</MapperConfig>
and i changed this configuration as below:
<!--
<map_data_source name="mvdemo"
jdbc_host="myComputerName"
jdbc_sid="orcl"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="!mvdemo"
jdbc_mode="thin"
number_of_mappers="3"
/>
-->
</MapperConfig>
i can connect to the database from sqlplus.
lastly, i just noticed that i do not have any ORACLE_HOME and J2EE_HOME settings in my Enviroment Variables. by the way, i use windows 200 prof. and i dont know how to configure it. problem can be relational with this matter. however, i configured the JAVA_HOME setting and isnt it sufficient for the J2EE_HOME setting? could you help be about this matter?
Similar Messages
-
An error occurred while attempting to perform the operation.
Hi All,
I am getting an error while running the report:
"An error occurred while attempting to perform the operation. Then operation did not complete successfully."
Although I can see the data coming is correct, but don't know why this error is coming.
I have seen for NULL values.
How can I see the detail log to trace the error?
Please help.
Thanks,
Himanshu TiwariHi,
You can login as system using SQLPlus and use the DBMS_SYSTEM.set_sql_trace_in_session procedure to set trace on another Discoverer session. This should establish if there is any database error occuring in the Discoverer session.
Rod West -
Event ID 1012 - There was an error while attempting to read the local hosts file
When I start my Computer after it has been turned off overnight (switched off at the Power supply) I get a Blue screen and have to reboot the PC. in the Event log it has this error: Event ID 1012 - DNS client events - There was an error while attempting
to read the local hosts file.
Once the PC has booted evrything is O.K. I can restart the PC with no problems, it only seems to happen if the PC has been switched off for a while.
I am connected to the net via an Netgear dg834v4 Modem/Router
Windows 7 Ultimate
Intel Q8200 CPU
2 x 360 Gb HDD
ATI 4680 !Gb Video Card
Digital HDA X-Mystique 7.1 Sound Card
Aver media 777 TV Tuner card.
Thank you
jeepers01
After further Investigation it seems that this error is Not responsible for my Blue screening......I started my PC after leaving it off all night, and it started normally, but i still have this error in the Event Log - System.....I have searched the Technet
forums (and there is a lot of ID 1012 errors) but non relating to my problem....If anyone knows what is causing this error and how to fix it, i'd be Grateful....although it does not seem to affect the PC in any way that i can see.
thanks
jeepers01Since Windows system uses separated user mode and kernel mode memory space, stop errors are always caused by kernel portion components, such as a third-party device drivers, backup software or anti-virus services (buggy services).
The system goes to a BSOD because there is some exceptions happened in the kernel (either the device driver errors or the service errors), and Windows implements this mechanism: When it detects some errors occur in the kernel, it will kill the box in case
some more severe damage happens. Then we get a blue screen or the system reboots (it depends on what the system settings are).
To troubleshoot this kind of kernel crash issue, we need to debug the crashed system dump. Unfortunately, debugging is beyond what we can do in the forum. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that
a dedicated Support Professional can assist with your request. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
Microsoft - Help and Support
If you are outside the US please see
Microsoft Worldwide Home for regional support phone numbers.
Meantime we can try some available steps as a general troubleshoot.
1. Please remove the antivirus and run the system with a period. If the issue does not occur, mainly focus on antivirus settings and compatibility.
2. Disable Automatic Restart and see detail information on the blue screen.
1).Click Start, in the Start Search box enter sysdm.cpl.
2).Click the tab Advanced. Under Startup and Recovery, click the Settings button.
3). Uncheck “Automatically restart”.
4). On the drop-down menu “Write debugging information”, choose “Small memory dump”.
5). Click OK.
When Blue Screen displays, you may find some useful information.
Arthur Xie - MSFT -
I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen. The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop -
Error 1316.A network error occurred while attempting to read the file .msi
Hi to all,
this is my first post on OTN forum! anyway...
My attempt to install Essbase-ExcelAddin-11121 Fail. During the execution of Spreadsheet Add-in the process generate this issue:
Error 1316.A network error occurred while attempting to read the file ...AppData\Local\Temp\_is711B\Setup.msi
i've seen also seen that in the directory AppData\Local\Temp\_is711B\ there is no file called Setup.msi but AppData\Local\Temp\_is711B\Setup.INI
i have to modify the installer?how? anybody resolve this problem?
I checked on google but, at this moment, no results.
thanks for all support
GaetanoHello Gaetano,
It sounds like you are using Windows 7 and/or Vista.
When running the installation try to right click on the executable and select "Run as Administrator".
Regards,
John A. Booth
http://www.metavero.com -
Itunes update 10.5.2.11 for windows 7 (64 bit) keeps crashing at this point...
"an error occurred while attempting to create the directory: C:\ProgramData\microsoft\windows\start Menu"
I have read all of the forums to no avail. Seems like a common problem.
Has anyone had the same issue and actually solved it?I'm getting this problem too. I have been running iTunes for a few years with no problems until recently. WHenever I try and open it I get an error message saying "An error occured while attmpting to create the directory: I:\iTunes\iTunes.Resources\de.lproj\EQWindow.nib" with the options to retry or cancel. Retry just results in the same error message occuring again.
I've tried other programs on the I: drive and they work fine, I've also followed the 'Removing iTunes Configuration Files' and some of the other apple support guides with no success. My windows updates are fine.
Any suggestions? -
I am getting error message while attempting to upgrade the software to iOS 6.1.3
Hi,
Need help on this, i am getting error message while attempting to upgrade the software to iOS 6.1.3The Current iOS for the iPhone 4s is iOS 7
How to update your iPhone, iPad, or iPod touch -
While attempting to install the latest iTunes update, version 10.5.3, I encountered an issue. I was forced to download this update manually which, after restarting my Windows 7, did not install properly. How do I get it to install this update?
The installer should have gone into your Apple Software Update folder:
C:\USERS\<user name>\AppData\Local\Apple\Apple Software Update
Right mouse click the msi file and select INSTALL -
An error has occurred while attempting to load the Crystal Reports runtime in deployed applications
My reports use to work but now i'm getting the following error on all reports in all the applications on my server
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.Hi Willingtolearnja,
This forum is for TFS, I'd like to know whether you use TFS and your question is related to TFS. It would be better to let us know more details about your scenario if it's related to TFS. If not, you might need to open a new thread in the proper tech forum
that your project related for a better response.
However, from the error message, you might use the wrong configuration for x86/x64 mode. Please change the configuartion and try again. Check the links below for more information:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/82e23647-7116-424b-b437-df0cb2be083d/an-error-has-occurred-while-attempting-to-load-the-crystal-reports-runtime?forum=vscrystalreports
http://stackoverflow.com/questions/19286630/an-error-has-occured-while-attempting-to-load-the-crystal-reports-runtime
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
An error has occurred while attempting to load the CR in hosting
I deployed my asp.net with crystal report in hosting server...
They have installed Crystal Report Basic Runtime for Visual Studio 2008.(10.5.3700.0) on windows server 2008 OS X64..
I developed my asp.net application with visual studio 2008 in xp machione x86 now on deploying this im getting the following error on hosting server, in my local server it works fine..
The error:-
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
They have installed 10.5.3700.0 runtime on server still why this error...?You probably installed the 32 bit runtime (x86) but are running the application in 64 bit mode. I think you are using a web app, so you need to do one of two things, install the x64 version of the runtime or switch the application pool for your website to run in 32 bit mode.
-
Unauthorized User can see the aggregated result?
Dear all,
I got a problem that, unauthorized user can see the aggregated result.
e.g. A user who is allowed to read data of Sales Office (0SALES_OFF) 0001 only. (It is done in the RSECADMIN already)
Now a cube contains Sales records of Sales office 0001 & 0002 :
Sales Office 0001 Sales Value 3000
Sales Office 0002 Sales Value 2000
When the user execute a query from the cube without any selection criteria, it give the aggregated Sales Value 5000.
But if the user try to drill down for each sales office, it can then give error, because the user are not suppose to see Sales Office 0002 records.
What I expect is an error at the very beginning when the user execute the query, saying the cube contains data that the user is not suppose to see, the user need to put in the correct Sales Office as criteria first.
Is there anyone can help on this issue?? I have no idea how can this happened?
Many Thanks!!!
ChrisHi,
Now I understood your concern correctly. Unfortunately, I do not have prompt answer for you. So, User should be able to view the aggregated result, but not to irrelevant sales office. If you don't have condition on Aggregated Result, restricting to individual Sales Office can be done in RSECADMIN.
Let's wait for other's opinions.......
Regards,
Suman -
BizTalk 2010 RTM version with SQL 2008 R2 .
An intermittent issue with the WCF-Custom adapter with sqlbinding, calling a SQL stored proc as below
Message gets suspended in BT Admin console with "An internal server error was encountered while attempting to transmit the message" .
Event log shows
A message sent to adapter "WCF-Custom" on send port "xxx" with URI "mssql://server/db?" is suspended. Error details: Unknown Error Description
Any advice please. Thanks
Sullu.
http://biztalkguide.blogspot.com/ Please mark as answer if this solved the issue.ThanksHi Chen
Is there any update on this please ?
I have applied the latest CU and have noticed the following issue.
BizTalk 2010 Enterprise Edition with BizTalk 2010 CU6 and CU3 for BizTalk Adapter Pack works fine , no issues noticed.
However ,
On a DEV VM ,BizTalk 2010 Developer Edition with BizTalk 2010 CU6 and CU3 for BizTalk Adapter Pack still gives the error mentioned in this post.
In addition Microsoft BizTalk Adapter Pack ,Microsoft BizTalk Adapter Pack(x64) & WCF LOB Adapter SDK are also installed .
Below is the Error message.
Message gets suspended in BT Admin console with "An internal server error was encountered while attempting to transmit
the message" .
A message sent to adapter "WCF-Custom" on send port "xxx" with URI "mssql://server/db?" is
suspended. Error details:
Unknown Error Description
Could you please check and advice what needs to be done to resolve this ? Thanks .
Regards,
Sullu
http://biztalkguide.blogspot.com/ Please mark as answer if this solved the issue.Thanks -
An error occurred while attempting to export the virtual machine (0x80070050)
I was exporting several VM's from a Vhost so that i could import them into a new cluster. Four out of the five machines went off with no hitch and were exported and then imported. However one of the machines throws up an error durring the export
"An error occurred while attempting to export the virtual machine.
Filed to copy file during export.
Failed to copy file from 'D:\path\of\vhd\VM.vhd to 'D:\path\of\export\VM.vhd': The file esists (0x80070050)"I have found an answer to my own question after
further investigation … In hopes of helping anyone who may have a similar problem in the future....
What happened was the server has two VHD’s one is located in C:\vm\vhd\server.vhd the second was located in a different directory such as C:\vm\vhd1\server.vhd
as both vhd files were named identically when the export was attempted it tried to move both files into the same directory I assume giving the “file already exists error”. -
An error occurred while attempting to update the database
Hi
the update from 2.82 to 2.9.0 fails for me with following message
An error occurred while attempting to update the database.
the update log ends like this
[Microsoft][ODBC SQL Server Driver][SQL Server]DELETE failed because the
following SET options have incorrect settings: 'QUOTED_IDENTIFIER'. Verify
that SET options are correct for use with indexed views and/or indexes on
computed columns and/or filtered indexes and/or query notifications and/or XML
data type methods and/or spatial index operations.
1> 2> 3> [16:56:20] RunShellCommand: Command: osql exited with code: 1
[16:56:20] RunShellCommand: Exit code indicates failure.
[16:56:20] UpdateDatabase: Failed to run database update script.
hope that anyone can solv this for meIt seems that my problem is with one of ldapservers.
When the periodic update runs.
then there will be error periodic update failed
log file mdm_error looks like this
[00:01:46] Failed running query:
IF NOT EXISTS(SELECT LDAPContainerName FROM LDAPContainers WHERE LDAPContainerName=? AND LDAPServerSAKey = ?)
BEGIN INSERT INTO LDAPContainers(LDAPContainerName, DisplayName, LDAPContainerType, ParentContainerSAKey,
LDAPServerSAKey, LDAPMemberType, AllowHandsOffEnrollment) VALUES (?,?, 2,
(SELECT LDAPContainerSAKey FROM LDAPContainers WHERE LDAPContainerName =? AND LDAPServerSAKey =?) , ?, 1, 1) END
SQLError:
I think this is the reason that the upgrade fails.
How can i solve this? -
Hello:
I have recently started getting this error when trying to Hot Sync my device:
An error occurred while attempting to initialize the Borland Database Engine (error $2108)
The device is a Symbol scanner with Palm OS v4.17. It is connected to my computer with a serial cable. The only relatively recent changes I can think of to my system are:
1. Installed a Borland software product (StarTeam) that is newer than my Palm software.
2. Installed MS Office 2007.
Please let me know if you need any more information.
Thanks!
Post relates to: NoneI would have to recommend you contact your vender where you got the scanner from. If a device got this error that we support we would hard reset the device and rename the backup folder under the username for hotsync. With this device I wouldn't know where to start.
Maybe you are looking for
-
when i try to active the imessage or facetime it typing "Waiting for activation" and stuck like this. when i go to setting > phone > i see the correct number. i think i read the whole google already trying resolving this issue tried everything, even
-
While running OID Target Recon .Exception Messagejava.lang.NoClassDefFoundE
Hi Experts, I am doing Target Reconciliation which will pull user from OID to OIM. I tried to run OID Target Scheduler Job which is giving us following error in status. "Exception Messagejava.lang.NoClassDefFoundError: com/sun/jndi/ldap/ctl/PagedResu
-
Targeting all objects down the group structure
Hi all. I have a tree of groups of several levels, like here http://i43.tinypic.com/29ok7sm.jpg Each group has some 5-10 objects, and I need to target each of them for some appearance change (the way it worked in Illustrator 9), without selecting eac
-
Can Someone help with SQL for update ?
Hi, can someone help me with this code 2 tables. table 1 = User_master table 2 = update_users I need to update user_master like so... update user_master set status = 'I' where user_id IN () problem is I have to over 10k user_id to update. So created
-
Session not saved in 8.1 sp3?
I just upgraded from 8.1 sp2 to sp3 and it seems my session is no longer being saved when I redeploy the webapp. I have save-sessions-enabled. Is it working for anyone else? Thanks