One inspection lot for multiple materials of purchase order line items

Hi All,
My client requirement is one inspection lot for multiple materials of purchase order line items.
Please share your thoughts.
Thanks in advance for early reply.
Regards,
Jishu

I totally agree with Amol.
I don't think I would touch that development nor would I ever tell a client it could reliably be done through development.
Knowing what I know about the table structures, I don't think you could create any development for this that could use a significant amount of the existing tables and functionality. I think you'd have to create all your own Z tables and basically rebuild the functionality. Tying it back in with SAP data will be difficult.
You're even looking at all custom screens for your results recording and UD as well. And if you have follow-on functions like batch classification requirements, batch determination, COA publication, results copy functions, use of DMR and sampling procedures, physical samples, quality notifications, etc. etc.. you could be looking a whole lot of development.
Craig

Similar Messages

Recorded results of inspection lots for several materials

Hi Experts,
Can any body explain how can I get recorded results of inspection lots for several materials?
Regards,
Shivkumar Dachawar

There is no standard report. You can use the inspection report button in QA02/QA03 to generate a report on a single inspectoin lot. You'll want to modify the SAPscript provided by SAP more than likely as the one provided is provided only as an example.
FF

Creation of one inspection lot for more than 1physical sample

hello SAP,
we have one common question.I have created 3 physical sample 20000006,2000007,2000008 and now i want to create one inspection lot for these 3 physical sample through QPR5 Transaction but system is generating each inspection lot for each physical sample which is wrong process. this is common scenario for most of the industry.SO please clarify and provide the solution

Hi,
I hope this solution gives some way out for you to solve your problem . I assume the sample is for the same material , phy. sample type and category
Create a new physical-sample drawing with refernce to :
Using this function, you can create a new physical-sample drawing (with one or more physical samples) that references:
An inspection lot
A production order or process order
A production version
You use this function to create physical samples that have not been planned in a sample-drawing procedure and which you can draw from a production process according to your specific needs. In an inspection during production, for example, you can draw physical samples from the process on the basis of time or quantity (for example, a physical sample every three hours or for every 1000 liters of material produced). You can freely specify the inspection-relevant operations in which you want to inspect the physical samples for the new physical-sample drawing.
please do let us know wether you were able to create one inspection lot .Or else please ellaborate the question step wise t-code and functions Will try to find a solution .
cheers
kp
source of information : SAP

GRN With 2line items(material,batch same)one inspection lot for 2line items

Dear Experts
As and when we make a GRN with 2 line items and same batch number we enter no. of containers differently but only the number from the first line item is flowing into the Inspection lot origin.We are creating only one inspection lot for 2 line items as the batch number is same for the items.
1. In material master i have given 01 inspection type ( with control inslot.. Each material document,batch, storage location) :---
this is the reason system is creating only one inspection lot.
i am entering manually same batch number for 2line items...
Here my problem is ... while giving UD... SYSTEM IS PICKING ONLY FIRST LINE ITEM NO.OF CONTAINER... IT HAS TO BE BOTH LINE ITEMS CONTAINERS.... IT IS PICKING BOTH LINE ITEMS QUANTITY... NO.CONTAINER ONLY IT IS NOT PICKING....
Waitting for experts reply

Hi,
As per your query if you put in MM forums then you will get the reply immly.
Anil

Single inspection lot for multiple plant

Dear Experts,
I am from pharma industry, my requirement is, there is any possibility to create single inspection lot
for multiple plant.
please guide.
Thanks in advance.
Yuvraj S. Dhotre

Don't open multiple threads for same query. It makes the solutions to be scattered.

Single inspection lot for multiple operation

Hi
I am creating a process order having 10 operation. the 3,5 and 8 are quality inspection (inprocess inspection) & last is PP operation that is for final confirmation.
The control key in quality operations are pi02 and for production operation are pi03.
i am using insp type 03 in material master
Curently only one inspection lot is trigerring for all operations hence while RR, all operation are appearing (Quality & production).
User needs diffirent inspection lots for different quality operation.
How can i triggere lots per QC operation??
I would be vary thankful if i get it.
AYK

Hi
Std will create one inspection lot for 1 process order
and RR will show all operations which is related to inspection
ask PP guy that cotrol indicator Pi03 - insp. char to be uncheck
then it will not show those operations not relevant for inspection
is't fullfill your requirement
why your business needs individual inspection lot for each operation?
give info
Thanks
Sami

Posting multiple invoices against single purchase order line item

Hi,
We receive invoices on completion of certain milestones and Goods receipt is done when the final lot of material is delivered. For example the purchase order may be to deliver 1 quantity of Machine. Material is supplied in bits like Gear Box, Engine and body. Invoice is received when Gear Box, Engine is supplied. Final invoicing is received on completion of delivery (taking into account what has already been delivered)
Goods Receipt in SAP needs to be posted only once when complete machinery is delivered (the tracking for different parts delivered is done outside SAP). However, the multiple invoice needs to be posted in SAP referring to same PO item (Please note PO quantity for complete assembled material is only 1).
This needs to be treated as material and not service in SAP. Can you please suggest how to book multiple invoices for same purchase order line item?
Thanks

Hi Charan
Thanks for your reply. However, both the options are not feasible. Invoices can be received in different periods, sometimes over different months or years, hence needs to be booked immediately.
Also, i cannot create material master for each component as the quantity for the final material is only 1.
Any other alternatives?
regards
Sameer

In Purchase Order Line item Maintaining Serial Numbers for Material Codes

Dear Gurus,
We have a business process in legacy system for Purchase Order like in PO line item, Material code with description, Quantity, unit of Measurement, Serial Number Start and Serial Number End is maintained, for example for Material code when we enter the data AXMLN00001 in Serial Number Start column, if the Qty 500 is maintained, by default system will calculate AXMLN00500 in Serial Number End column.
We understand that in standard SAP we donu2019t have this option of maintaining Serial Number Start and End in Purchase order Line item. Please let us know how this can be mapped and is it advisable to create two Z fields in EKPO table or else can we make any development.
Suppose if this is not possible in SAP for PO then in Banks if we want to place a order for Cheque books how we can maintain Start and End Serial Numbers to print in cheque books.
Also client is not agreeing to maintain manually Serial numbers in item text.
regards,
Dhanu

Aamir,
When the PO Item was created say for example Material had Valuation category "Y" and latter you wanted to change the category to "Y". Now system would have check for all open PO's etc...based on this you must have set Deletion Indicator to this Line Item to allow valuation category change in material master. Now when this Item got created in the table level (EKPO), system updates the valuation category "Y". Currently this valuation category is not active so it would not allow you to perform removal of deletion indicator as program cannot automatically nor you have an option to manually update the valuation category to this Item.
Regards,
Prasobh

User Exit for Purchase Order Line Items.

I have been trying to search for a User Exit for Purchase Order Line Items and have been unable to do find anything. I need to overwrite the Net Price and Pricing Condition on a certain type of material based upon the Pricing Condition for that Line Item which is on the Sales Document. Any direction you can point me into would be greatly appreciated. Thanks.

Thanks for pointing me in the right direction. I was able to create my first BADI using the PROCESS_ITEM method. The following link was also very helpful: Re: BADI ME_PROCESS_PO_CUST Method:PROCESS_ITEM

Creating inbound delivery for the purchase order line items

Hi Experts,
Please let me know how can I create inbound delivery for the purchase order line items? Say, I have a purchase order with 5 line items in it. I wanted to create an inbound delivery for only 2 line items at this point of time. Which SAP Standard transaction I have to use and what all data I need to populate? I would appreciate any help on this and will reward the right answer. Please let me know.
Thank you in advance.
with regards,
Muthu Ganapathy.

Hi,
While creating the inbound delivery (VL31N), intially all the items will be shown, see the advance shipping notfication - from the vendor for which he has send confirmation & rest items you can delete simply & save. & next time when the vendor sends rest advance shipping notifcation (confirmation), you can receive them.
Hope this answers your query.
Regards
Irfan.

Free of Charge indicator in Purchase Order / Line item

Dear All,
Is there a table where i could locate if a particular purchase order / line item has the FOC tick maintained. I went through quite a few tables and am unable to locate the same.
Or is there any other logic from which i could derive if a particular Purchase Order / Line item is FOC or not.
Shall await a reply
thanks
shabeen buhary

Dear,
The 'Free Items' indicator in the overview is only used to facilitate the switching off of the Inv.Receipt flag and the GR-based IV flag.
Note that the 'Free Items' indicator is not stored on the PO item table EKPO.
The Inv.Receipt flag (and the GR-based IV flag) are the fields that really controls if an item is 'free' or not.
So, the field is initiated based on the values in those fields rather than from input from the user.
When an invoice is expected it's not a free-item. This indicator invoice receipt is chosen from the main-item and also from the
customization maintained for item category 0 in table T163.
Regards,
Syed Hussain.

Price changes in Purchase order Line Items its displaying as"WF-BATCH"

Hi Experts,
I need some Information about Price changes in Purchase order Line Items,In PO Documents Price changes through this wf-batch has changed the value of this row to xxx.xx USD, which does not correspond the invoice.
If i selected the Item changes in the Purchase Order its displaying as"WF-BATCH".
So please try to clarify where this batch originates from.
Brgds,
RK

Hi Jurgen,
Thanks for your reply.
But how i can check this in Purchase orders,on what basis this price changes information is recorded in PO Line Item level.
can you pls guide me some steps to check the price changes through WF-BATCH.
Brgds,
RK

Purchase order Line item Excise Details

Dear All..
In purchase order line item Excise Details Basic price and Excise 14% and 2%cess and 1%Se.Cess And cst 4% Are Stored in Which table.. or any standard report available for this.. Please Resolve this.
Usefull Threads will Be Rewarded..
Thanks & Regards
Kumar

for excise check table J_1IEXCHDR for header
J_1IEXCDTL for item excise
The Table name used to find the Tax Values are
KOMV: Pricing Communications-Condition Record
KONV: Conditions (Transaction Data)
From the above tables you can refer the fields below.
KAWRT
KBETR
Fetch the corresponding records based on the field
KNTYP
hope it help
regards
kunal

Which table stores the condition values of a purchase order line item?

Hi,
Please let me know the table that stores the condition values of purchase order line items(when we click on conditions tab after selecting an item then we can see the condition types and there is a corresponding condition value for that condition type.
My requirement is to get the actual price for a purchase order line item(it can be seen in the last line and it is calculated after considering all the condition types) and display this value in a custom report.
Thanks,
Ravindra

Hi Ravindra
You can find the conditions data for PO in TAble KONV.
KONV-KSCH is the condition type
KONV-KWERT is the cond value
KONV-KNUMH is the condition doc no. which is there in EKKO field KNUMH.
So u have to make a link between KONV-KNUMH and EKKO-KNUMH.
Thanks
Vijeta

Restrict purchase order line item selection in MEMASSPO

How to restrict in authorizations of role which purchase order line item can be selected by user in the memasspo.
I have a scenario where Business wants that no user should be allowed to select all the Purchase Order line items rather should be displayed sub set of the entire purchase Order line items while attempting to do mass change in the PO created.
Thanks & Regards,
Abhimanu

The mass transaction is meant to change many POs and their items at one time.
The user can not change anything with mass which he cannot do in ME22N.
if he can do it in ME22N, why should he not be able to do it in MEMASSPO?
Based on what criteria should a item be restricted from a change in your special case, how do you define your subset?

One inspection lot for multiple materials of purchase order line items

Similar Messages

Maybe you are looking for