One instance registered in two rman catalogs is possible?

Customer wants that one instance be registered in two different rman catalogs.
and perform two different backups.
There is a sincronism between control file and Catalog, what could mess it up having two catalogs. On the other hand there is the DBID who identify the database on each catalog.
Can anyone clarify if this is possible or not?
TX

Lalbuque,
RMAN performs a backup using a "Media Manager Layer" or "MML". There can only be one MML installed at once on a particular ORACLE_HOME and it seems that yours is TSM; you cannot run an RMAN backup to tape without an MML. This is true even if you backup WITHOUT a catalog so adding a second will not help.
There are a number of solutions to this problem. Here are a couple.
Firstly, you could backup your database to the non-TSM tapes without RMAN. You can do this either by shutting the database down first or you could put the database into backup mode for the duration of the backup. The former is simpler but a) requires an outage and b) requires you to be absolutely sure that your shutdown was clean. The latter requires some detailed knowledge of oracle backup concepts but avoids the other problems.
The second solution is to backup your database to disk with RMAN and then to copy the resultant files to tape.
Whatever solution you choose please bear three things in mind:
1) The purpose of backup is to recover. Make sure you have a documented recovery process and test it.
2) The use of a second catalog is not required.
3) Test your ability to recover. Have I said that already :-)
--Tony Hasler

Similar Messages

One 8i instance and two rman catalogs 8i and 8

Can I have a single 8i instance for RMAN only with two catalogs, one for 8i and one for 8.0?

Robert,
Yes you can use a single database for 2 recovery catalogs. You can create 2 different schemas for each RMAN catalog version and each of those schemas can hold a different version of the RMAN catalog.
The only reason I can think that you would need 2 different catalogs is because you have an 8.1.X target and a 8.0.5 target? If so, make sure to have the RMAN catalog be the latest 8.1.x release.
In general, the rules of RMAN compatibility are as follows:
o The RMAN catalog schema version should be greater than or equal to the catalog database version. See "Note 1: 8.1 or Later Catalog Schemas in 8.0 Catalog Databases".
o The RMAN catalog is backwards compatible with target databases from earlier releases. See "Note 2: 8.1 or Later Catalog Schemas and 8.0 Target Databases".
o The versions of the RMAN executable and the target database should be the same.
Note 1: 8.1 or Later Catalog Schemas in 8.0 Catalog Databases
RMAN cannot create release 8.1 or later catalog schemas in 8.0 catalog databases.
Note 2: 8.1 or Later Catalog Schemas and 8.0 Target Databases
Restore operations for an 8.0.4 or 8.0.5 target with an 8.1 or later catalog schema do not work when both these conditions are met:
The target database is mounted or open
You are connected to a recovery catalog
If any of these conditions is not met, then you can use an 8.1 or later catalog schema with an 8.0.4 or 8.0.5 target database.
Note 3: 8.1.6 Catalog Schema and Pre-8.1.6 RMAN Executable
Using a pre-8.1.6 release of the RMAN executable with recovery catalog schema of release 8.1.6.0 or 8.1.6.1 (newly created by 8.1.6 RMAN executable using the CREATE
CATALOG command) requires the following update at the catalog database:
SQL> UPDATE CONFIG SET VALUE='080004' WHERE NAME='COMPATIBLE';
null

Which is better? Two Oracle user in one instance OR in two instances?

Which is better?
I could not find any benchmark for number of instances per user
in the same machine.
suppose that you have two major Oracle user, from performance
point of view it is better to make separate instances in same
machine or keep these two users in the same instance.

Hi.
I understand that you will use oracle for two different
applications on the same host.
Each instance has its SGA and background processes. So, using
two different schemas(users) in one instance you can share
phisical memory between the applications. Concerning background
processes, you can start as many of them as you wish, so it's
not a problem. If you decided that one DBW is not enough, you
could configure oracle to use two or more.
best regards,
Andrew

One instance and two databases?

Hello, I've installed oracle database on my server. I've read a lot of documentation to learn the basic concepts.
Ok, I have a question. I have read that one instance only can manage ONE database. Is it true? If it's true, how on earth I can create two database? for example, I want to create database-one and database-two.
I would create these with CREATE DATABASE command. How does Instance know if I want to access to database-one or database-two. How I indicate it in initilitation parameter file of my instance?
In sumary, Can one instance works with two databases?

Look at the following output. If I do not set my ORACLE_SID variable, the 9.2.0.7 client connects to the 9.2.0.7 database instance. If I set my ORACLE_SID , the same 9.2.0.7 client now connects to the 10.2.0.1 database (the database specified in the ORACLE_SID variable).
C:\>set ORACLE_SID=
C:\>sqlplus kkishore/kkishore
SQL*Plus: Release 9.2.0.7.0 - Production on Mon Jul 17 09:27:55 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
SQL> exit
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
C:\>set ORACLE_SID=ORA10GR2
C:\>sqlplus kkishore/kkishore
SQL*Plus: Release 9.2.0.7.0 - Production on Mon Jul 17 09:29:31 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> disconnect
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>Message was edited by:
Kamal Kishore

Unregister from rman catalog

Dear All,
Currently our production backup is done by rman with catalog database. But I want to decommission it. I want to use the target database controlfile only for rman backup.
what is the right approach to configure it?

Currently our production backup is done by rman with catalog database. But I want to decommission it. I want to use the target database controlfile only for rman backup.
what is the right approach to configure it?No ned to confiugre, while connecting to RMAN or in backupjob scripts just do not mention catalog connectivity.
If any old backups available then register them with controlfile..
in case of catalog :-
rman target sys/****@prod catalog rman/rman@catlog
in case of no-catalog:
rman target sys/****@prod
to register old backups:-
RMAN> catalog start with 'location of backups';

WebLogic Error : Registered more than one instance with the same objectName

HI there, I'm facing a big problem. I have two environments installed on the same physical machine.
I have ALSB and WLI servers running out there.
Environment 1 - WLI port running at 7011 domain name : stp_wli_domain and ALSB port running at 8011 domain name: stp_alsb_homo1 - folders- stp_wli_domain / stp_bea_alsb_homo
Environmnet 2 - WLI port running at 7211 domain name : stp_wli_domain2 and ALSB port tunning at 8211 domain name : stp-alsb_homo2 - folders - stp_wli_domain2 / stp_bea-alsb_homo2
Everything was working fine, but these days I had install new deployments on both environment and I got this error :
java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : stp_wli_domain:ServerRuntime=wli_wls01,Name=stp_wli_domain,Location=wli_wls01,Type=AIRuntime new:com.bea.wlai.management.AIRuntimeMBeanImpl@bcf22dc existing com.bea.wlai.management.AIRuntimeMBeanImpl@de02e6c
The weird is : There is no same object name, as you can see, domains are different, folders are different and ports are diferrent, including multicast addresses.
Have you guys seen this before ?
I'm under pressure here, 'cause some projects had stopped to work.
Please I would appreciate any help.
Tks.
Edson

HI there, thanks for attention..
See ...
There's a lot of confusion with these env's .
I did not built this, so... I'm cleaning my hands.... anyway... :)
I must fix....
Well basically if we have two env's, so we have different project each one right ?
Ok, but I was told that if you have on the same network and same physical machine the name of AdminServer as "AdminServer" in all domains, so it goes with problems... I never heard about it... but is a good practice you put the names for example :
WLI - WLIAdminServer
ALSB - AlsbAdminServer
WLI2 - WLiadminServer2
ALSB2 - ALsbAdminServer2
I would do it.. this way..
But how it wasn't me...
We got..
WLI - WliAdminServer
ALsb - AdminServer
WLI2 - AdminServer
ALsb2 - AdminServer
Have you got it ?
So... I was told that this could be a problem, almost all AdminServers with the same name... guess what ?Some Projects are back to work. but not at all.. only some.. so I 'm breathing better now... but I would like to know if you seen this before ?
I would appreciate your help again.
Unfortunately there's no detailed stack trace to track this
Tks.

Can't register a database in RMAN catalog (PL/SQL package not current)

Hi RMAN experts. I'm trying to register a 10.2.0.1.0 database into a 10.2.0.5.0 RMAN catalog but I get the following error (Note: following was done on the rman server machine, ORACLE_SID=rman, target database is remote)
$ rman catalog rman/rman target sys@MPOWER
Recovery Manager: Release 10.2.0.5.0 - Production on Sat Apr 30 12:54:16 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.00 in TARGET database is not current
PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.00 in TARGET database is not current
connected to target database: MPOWER (DBID=**********)
connected to recovery catalog database
RMAN> register database;
database registered in recovery catalog
starting full resync of recovery catalog
RMAN-00571: ===============
RMAN-00569: =========ERROR MESSAGE STACK FOLLOWS
RMAN-00571: =================
RMAN-03008: error while performing automatic resync of recovery catalog
ORA-00904: : invalid identifier
Basically the error says that there are two packages in the TARGET database (SYS.DBMS_BACKUP_RESTORE and SYS.DBMS_RCVMAN) which are not compatible with the RMAN catalog.
I cannot register the target database into the RMAN catalog.
I highly appretiate if you give me an advice on this.
Regards

user13064912 wrote:
Hi RMAN experts. I'm trying to register a 10.2.0.1.0 database into a 10.2.0.5.0 RMAN catalog but I get the following error (Note: following was done on the rman server machine, ORACLE_SID=rman, target database is remote)
$ rman catalog rman/rman target sys@MPOWER
Recovery Manager: Release 10.2.0.5.0 - Production on Sat Apr 30 12:54:16 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
PL/SQL package SYS.DBMS_BACKUP_RESTORE version 10.02.00.00 in TARGET database is not current
PL/SQL package SYS.DBMS_RCVMAN version 10.02.00.00 in TARGET database is not current
connected to target database: MPOWER (DBID=**********)
connected to recovery catalog database
RMAN> register database;
database registered in recovery catalog
starting full resync of recovery catalog
RMAN-00571: ===============
RMAN-00569: =========ERROR MESSAGE STACK FOLLOWS
RMAN-00571: =================
RMAN-03008: error while performing automatic resync of recovery catalog
ORA-00904: : invalid identifier
Basically the error says that there are two packages in the TARGET database (SYS.DBMS_BACKUP_RESTORE and SYS.DBMS_RCVMAN) which are not compatible with the RMAN catalog.
I cannot register the target database into the RMAN catalog.
I highly appretiate if you give me an advice on this.
RegardsCould you try to run the rman at the target database server (MPOWER), instead of rman catalog server ant try to register your database?
Your rman client is higher than your target server. That could be the problem.
Best Regards,
Gokhan
If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks

To Find the instance name in RMAN catalog

Hi ,
I have rman catalog which got registered 150 databases. Am able to get the dbname,id for the 150 databases but not able to get the server name (host name) of the correspoding databases in catalog views as well as in db views.
Kindly revert us if you know any other analyisis or way to find the server names.
Regards
Krishnan

What does RMAN care if RAC is involved or not?
Oracle provides RMAN for backing up and restoring the database. RMAN enables you to back up, copy, restore, and recover datafiles, control files, SPFILEs, and archived redo logs. RMAN is included with the Oracle server and it is installed by default. You can run RMAN from the command line or you can use it from the Backup Manager in Oracle Enterprise Manager. The procedures for using RMAN in RAC environments do not differ substantially from those for Oracle single-instance environments. Refer to the Oracle Backup and Recovery documentation set for more information about single-instance RMAN backup procedures.

One instance for two different application

Hello,
I have to solve following problem..
need have one instance of object for two different application..fist is standard SE application and second is EE (web)..
SE application is a server..listen on and accepting connection from mobile phone..and EE application need to show list of connected devices and should say to SE application that new device was connected..
I would like to do this without database..only server and web app..
I have thought about RMI..but hope there is more simple solution..
Thanks a lot for your ideas.
Dmitrij

I would like to do this without database..only server and web app..You have your reasons for wanting this to be the case. If you are sure you don't want a DB, then pass the state of the object between the two ends using XML as the transport form. As someone said, you can use JMS or you can write an HTTP POST or probably other transport mechanisms other people will suggest to actually get it over the wire from one side to the other.
As to your question of how to sync state, just make the object you're sharing final after it's been created (on the side that creates it) and make the reference that receives it and holds it final also, after you've reconstructed it from the XML you received.

Why are there two ns-httpd processes running for one instance of iws 6

Hi all,
I'm used to iWS 4.x where there's only one watchdog and one ns-httpd process running for any given install of iWS. Now in iWS 6.x I noticed there are two processes for the admin server and two processes for the actual single web server instance, along with two watchdogs.
What are the extra web server instances doing? I noticed that there is a 'parent' relationship with the pid's, so I guess one is spawning the other, but why? If it's to have persistent state over restart, isn't that what uxwdog is for?
Thanks in advance,
James Huang

goldeye wrote:
$ ps -ef|grep ns-httpd
root 5612 5611 0 May 09 ? 2:22 ns-httpd -d /u00/iplanet/server6/https-admserv/config
root 5613 5612 0 May 09 ? 5:30 ns-httpd -d /u00/iplanet/server6/https-admserv/configThis is Administration Server
root 22940 22939 3 May 16 ? 155:11 ns-httpd -d /u00/iplanet/server6/https-eagnmnsu24f.xxxx.gov/config
nobody 23040 22940 0 May 16 ? 136:35 ns-httpd -d /u00/iplanet/server6/https-eagnmnsu24f.xxxx.gov/configThis is Web Server instance.
Can you send the output of ps -ef|grep iplanet ?
iplanet Web Server is very old please move to latest Web Servers.
You can download latest Web Servers from [http://www.sun.com/download/index.jsp?cat=Web%20%26%20Proxy%20Servers&tab=3&subcat=Web%20Servers].
Please use either of the two
Sun Java System Web Server 7.0 update 5 (release notes are located @ [http://wikis.sun.com/display/WebServerdocs/Release+Notes]) or
Sun ONE web Server 6.1 SP11 ( release notes are located @ [http://docs.sun.com/app/docs/doc/820-7659]).
Migration Guide will help you in migration [http://wikis.sun.com/display/WebServerdocs/Installation+and+Migration+Guide] or let us know if you have any problems.
When I start Sun Java System Web Server 7.0 or Sun ONE 6.1 Server instance, I can see one watchdog and two webservd processes :
$ps -ef|grep /export2
user 7967 7966 ... webservd -r /export2/ws -d /export2/ws/https-....
user 7966 7965 ... webservd -r /export2/ws -d /export2/ws/https-...
user 7965 1 ... ./webservd-wdog -r /export2/ws -d /export2/ws/https-...

How can i get no of database registered to RMAN catalog database.

I want to know that how can I know that no of database are registered to particular RMAN repository database.
And also i want to upgrade my reposiotry catalog as we are upgrading our database to 11g
Kindly help me .

Hi,
Just connect to the catalog database as "rman" user and query the rc_database view.
sqlplus <rman_user>/<rman_user_passwrd>@<catalog_db>
SQL>select * from rc_database;
user11958935
Handle: user11958935
Status Level: Newbie
Registered: Nov 20, 2009
Total Posts: 72
Total Questions: 29 (22 unresolved) Please consider closing the unanswered questions and keeping the forum clean.

One instance of a component in two TabNavigator children

Hello,
I currently use a TabNavigator composed of two tabs in which
I have two instances of the same component and I was wondering if
it were possible to have a unique instance in those two tabs. Let's
suppose that I have a TextInput in the tab `A' of my TabNavigator,
is it possible to have the same instance of this TextInput in the
`B' tab ?
The component in my problem is a big component that I would
like it to be shared in those two tabs without using something
complicated as addChild() removeChild() on the fly or something too
complex. For now, I have simply a common model to those two
instances but I am mostly worried about memory use, this component
is huge and it would be really cool to have the same instance.
The best would be something like having a reference in the
`B' tab of the instance of the `A' like a pointer but I do not have
enough knowledge in Flex to conceptualize such architecture, so if
anyone has an idea, I'm all hears. Thanks

"Bobito7" <[email protected]> wrote in
message
news:ghr1v2$1hm$[email protected]..
> Hello,
>
> I currently use a TabNavigator composed of two tabs in
which I have two
> instances of the same component and I was wondering if
it were possible to
> have
> a unique instance in those two tabs. Let's suppose that
I have a TextInput
> in
> the tab `A' of my TabNavigator, is it possible to have
the same instance
> of
> this TextInput in the `B' tab ?
>
> The component in my problem is a big component that I
would like it to be
> shared in those two tabs without using something
complicated as addChild()
> removeChild() on the fly or something too complex. For
now, I have simply
> a
> common model to those two instances but I am mostly
worried about memory
> use,
> this component is huge and it would be really cool to
have the same
> instance.
>
> The best would be something like having a reference in
the `B' tab of the
> instance of the `A' like a pointer but I do not have
enough knowledge in
> Flex
> to conceptualize such architecture, so if anyone has an
idea, I'm all
> hears.
> Thanks
There's an example of something like that with an Accordion
here:
http://flexdiary.blogspot.com/2008/09/groupingcollection-example-featuring.html
It does use addChild, though (addChild handles removeChild,
so you don't
need to call it separately.
HTH;
Amy

One BI 11g with two instances

Hi,
I have this problem:
I have installed BI 11g on windows server A. On this server there is also oracle instance as data source. I'd like to work also with another independent oracle instance on server B. Is it possible or can I use only one instance for BI 11g?
Thanks for your reply
Dotlacil

Hi,
The way that u said is a big task.
One suggestion with out mapping R/3 QTLY to BI DEV is.
Copy the Data from R/3 QLTY to R/3 Dev.So you will get sufficiant data for testing.
I hope this is one point that you can think and easy to implement also.
Regards
Ram.

Our RMAN Catalog Problem

Hello
We have 7 major oracle instances on 2 servers and we have created a RMAN catalog on another server
Our principal databases are Standard Oracle 10g (10.2.0.2.0) under linux , and the catalog is Enterprise Oracle 10g (10.2.0.2.0) in Windows all the databases are registered in catalog when I query RC_DATABSE view it shows all
instances informations , in all RMAN login commands the "CATALOG" clause has been written
Now my problem is that just two of databases backups are recorded in catalog for example when I query "RC_BACKUP_SET" view it only contains backups of two databases while are backups have been performed completely without any error
Do you know what is problem ?
thank you

select dbid,name from rman_user.rc_database;
DBID        NAME
<h4>----------------  ----------------</h4>
1498968931       SCSDB
4293064263        SSTDB
861276728         SUBDB
2404423160        SAM
3976246282        SFIDB
1760672514    SCEDB
817528985        S900NS1
select t.name,t1.db_id,bs_key
from rman_user.RC_BACKUP_SET t1,rman_user.rc_database t
where t1.db_id=t.dbid;
NAME        DB_ID        BS_KEY
<h4>----------------  ----------------  ----------------</h4>
SUBDB        861276728        14366
SUBDB        861276728        14365
SUBDB        861276728        14364
SAM        2404423160        14491
SAM        2404423160        14490
SAM        2404423160       14489
select name, max(START_TIME)
from rman_user.rc_database d,
rman_user.rc_backup_set s
where db_id(+) = dbid
group by name
order by 2 desc;
NAME        MAX(START_TIME)
<h4>----------------  ----------------</h4>
SCEDB
S900NS1
SCSDB
SFIDB
SSTDB
SAM        6/14/2008 1:06:15 AM
SUBDB        6/13/2008 9:02:43 PM
This date (6/14/2008) is old because I haven't used the catalog for a long time, due to the problem I've mentioned above.
Edited by: TakhteJamshid on Jan 10, 2010 2:49 AM
Edited by: TakhteJamshid on Jan 10, 2010 3:00 AM

Error while Registering the Database with Catalog..

I m creating recovery catalog in same database, and getting the errors.
1. I have created TOOLS tablespace
2.CREATE USER RMAN2
SQL> CREATE USER rman IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4 QUOTA UNLIMITED ON tools;
CREATE USER rman IDENTIFIED BY cat
ERROR at line 1:
ORA-01920: user name 'RMAN' conflicts with another user or role name
SQL> ed
Wrote file afiedt.buf
1 CREATE USER rman2 IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4* QUOTA UNLIMITED ON tools
SQL> /
User created.
3. GRANT RECOVERY_CATALOG_OWNER
SQL> GRANT RECOVERY_CATALOG_OWNER TO rman2;
Grant succeeded.
4. To create the recovery catalog:
1. Connect to the database that will contain the catalog as the catalog owner.
H:\>rman catalog rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 10:45:52 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to recovery catalog database
2. Run the CREATE CATALOG command to create the catalog.
RMAN> CREATE CATALOG;
recovery catalog created
3. Optionally, start SQL*Plus and query the recovery catalog to see which tables were created:
H:\>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 5 11:53:36 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: rman2/cat
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select count(*) from cat;
COUNT(*)
91
SQL> ed
Wrote file afiedt.buf
1 select owner, table_name, tablespace_name
2 from dba_tables
3* where table_name='DB'
SQL> /
OWNER TABLE_NAME
TABLESPACE_NAME
RMAN2 DB
TOOLS
RMAN DB
ABAMCO_TEST
Next step is to registering the Database in the Recovery Catalog.
Registering a Database in the Recovery Catalog
H:\>rman TARGET / CATALOG rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 11:56:09 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
I m getting above error while registering the Database with Catalog,
Can anybody help me how can I register the Database with Catalog.????
Waiting for Reply!!!!!!!

Dear Manoj I can log in at TARGET Database.
H:\>rman
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 12:41:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect target sys/rock
connected to target database: ROCK (DBID=3255117147)
RMAN>
============================================================
USING CONNECT STRING as you said.
H:\>rman target "sys/rock@rock as sysdba" catalog rman2/cat@rock
Argument Value Description
target quoted-string connect-string for target database
catalog quoted-string connect-string for recovery catalog
nocatalog none if specified, then no recovery catalog
cmdfile quoted-string name of input command file
log quoted-string name of output message log file
trace quoted-string name of output debugging message log file
append none if specified, log is opened in append mode
debug optional-args activate debugging
msgno none show RMAN-nnnn prefix for all messages
send quoted-string send a command to the media manager
pipe string building block for pipe names
timeout integer number of seconds to wait for pipe input
checksyntax none check the command file for syntax errors
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00552: syntax error in command line arguments
RMAN-01009: syntax error: found "as": expecting one of: "append, at, auxiliary, catalog, cmdfile, clone, checksyntax, debug, log, msglog, mask, msgno, nocatalog, pipe, rcvcat, script, slaxdebug, send, target, timeout, trace"
RMAN-01007: at line 0 column 16 file: command line arguments
H:\>rman
It didnt work either.
I have only one database rock, and created recovery catalog in it. I want to register rock database with recovery catalog.

One instance registered in two rman catalogs is possible?

Similar Messages

Maybe you are looking for