OneKey Factory Default and OEM Software

Hi everyone,
I want to reinstall Win7 on my v570 because I'm hoping to resolve some performance issues. I love the notebook and the stock applications that came with it: Bioexcess, Lenovo Security Suite, Boot Optimizer, VeriFace, etc...
My question is this: Will using the OneKey recovery app to restore to the original factory settings simply do a clean install of Windows 7, or will it install Win7 with the Lenovo applications and Bioexcess as well?
Thanks,
Nathaniel
Solved!
Go to Solution.

hi nathanielfilipe.
if you use one key recover button to perform clean windows installation, you won't need to re-install these softwares.
hope this helps.

Similar Messages

After updating software on IPAD from computer says I have to reset IPAD to factory default and will lose all data???

After updading software on IPAD2 tells me I have to reset to factory default and will lose all data

Kinda.
Read the following in its entirty before doing anything.
Note that a "Restore" could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

I have ipad mini 2 updated to ios 7.1.2. Now ipad keeps shutting down and rebooting to the apple logo. I factory reset and redownloaded software in recovery mode. Still happening. What else can I do?

I have ipad mini 32gb. I updated to IOS 7.1.2. Since then ipad keeps shutting down and rebooting to the apple logo. It happens so many times I cannot use the ipad. I have tried factory reset and reinstalled software in recovery mode. Ipad is only 1 1/2 years old and in great condition. Is there anything else I can do besides soend $200 to fix it?

Sounds like a hardware issue to me going by the CRC error you mentioned. I'd make a Genius Bar reservation (you'll need your Apple ID) if you have a nearby Apple Store and get it evaluated. The evaluation is free but repair/replacement could incur other charges.
Genius Bar reservations:
https://www.apple.com/retail/geniusbar/

I have a cp1215 has started to be extra slow have reset to factory defaults and reinstalled driver

I have a cp1215 has started to be extra slow have reset to factory defaults and reinstalled driver on the computer etc....
I think where it is taking the most time is in the deleting from the print queue. I have an HP desktop computer with 3gb ram on windows xp. even if all I am doing is printing a test page with no other programs started it takes for ever to print a page.
any help would be appreciated

Hi Mikeryan,
Have you tried turning off bidirectional communication?
Open your printers and faxes folder, right click the icon for your printer, and choose printer properties.
Go to the ports tab, and un-check "Enable Bidirectional Communication".
Restart your computer, and try printing to see if the issue has been resolved.
Hope this helps
I am an HP Employee
Click the KUDOS Star to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"

HT5622 I recently purchased a use 2nd generation iPad. I was told the Apple ID is locked. If I re-set the iPad back to factory defaults and erase all former info on the iPad. can I now use my Apple ID to install Apps and connect to my Apple Computer?

I recently purchased a used 2nd generation Apple iPad. I was told that the iPad is locked because of Apple ID. I plan on erasing everything on the iPad and setting it back to factory defaults. Can I now use my personal Apple ID via my iMac to start it as it originally came from Apple??

It is a brick! But I did somehow get into the iPhoto section and was able to find the Former owner that owned the iPad and was able to contact him VIA FaceTime. on my iMac. He was of little help because he was not the original owner, but he bought the iPad as I did from a huge supplier and i was able to contact that supplier who refused to give out any information about the previous owner. I had the iPad hooked up to my somehowiMac via the USB cable and went through the setup procedure to no avail. Then after pressing the Home button several times it somehow went to the iPhotos that were on the iPad? There were 2 pictures of the owners email address. I then copied them to my iMac and used iPhoto app to enlarge the photos. It worked.So there is a way,just takes time to somewhat hack into Find My iPad?Phone.
Personally, it is not Apple's responsibility to protect customers of their personal DATA. With such a high security application. Then of coarse it is a great idea. Then again it is the responsibility of the former owner to wipe and rest the iPad before reselling it. This being the case like those sold on eBay and elsewhere that are ID Locked should not be allowed to be sold. Personally the ID lock is much like a VIN number of a car. In most states one cannot sell a car without the VIN Numbers. Somewhat the same thing should be true of ID Locks

Picked up older powermac G4 from a garage sale. Can not do any updates because owner, that has now moved did not wipe it clean and I need a password to do anything. Is there a way to restore to factory default and make myself admin?

Recently purchased older powermac G4 at a garage sale. Unable to do anything because owner, that has now moved, did not wipe it clean and everything I try to do requires his password. Is there a way to restore to factory default, make myself admin and reset password? Hoping this purchase wasnt a complete waste of my time and money.

Here's the instructions if you have the discs.
Mac OS X: Changing or resetting an account password
http://support.apple.com/kb/HT1274?viewlocale=en_US
Changing your administrator password
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh655.html
Here's one method to reset the password without the install disc:
1. boot computer and hold the "apple" key and the "s" key.
2. wait for terminal show
3. release keys
4. type without the quotes: "/sbin/mount -uaw"
5. press enter
6. type without the quotes: "rm /var/db/.applesetupdone
7. press enter
8. type without the quotes: "reboot"
9. press enter
This will let you create a new admin account when you reboot your computer.
Also, without the discs, look at Mac OS X Tip - No Password, No Root, No CD? No Problem.
http://www.macobserver.com/tip/2003/06/16.1.shtml
Here is a way to get around not knowing the admin password on Macs.
To reset your OS X password without an OS X CD you need to enter terminal and create a new admin account:
   1. Reboot
   2. Hold apple + s down after you hear the chime.
   3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
          * mount -uw /
          * rm /var/db/.AppleSetupDone
          * shutdown -h now
   4. After rebooting you should have a brand new admin account. When you login as the new admin you can simply delete the old one and you’re good to go again!
Not sure is this will work on a Mac running OS 9.
 Cheers, Tom

Upgraded to IOS 8 and restore to factory default and now get error trying to restore

I was told to restore Ipod Touch 5th G to Factory defaults to check mic problem. I performed backup which seemed to work fine and forced to install update to IOS 8. Did the Restore to factory default which seemed to work without a problem.
Now when I go to RESTORE from backup I get a message saying that backup failed "....backup session failed"
What do I do now? I copied the backup folder to my desktop as they suggested.
If I go to iTunes 12 it will show ipod with the name it previously had but still nothing.

Synced mead like apps and music are not included int he iPod backup that iTunes makes. They are synced back tot he device from yur iTunes library. If they are not in the library then they can't be synced back.
If necessary;
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Restoring Sun 5210 NAS to factory defaults and wipe existing memory?

Im trying to erase the existing memory on a storage unit and also would like to restore the factory defaults on the unit also. Im really new at this and could use all the help i can get.
Edited by: znorris on Jun 16, 2009 2:29 PM

If you're restoring a file you have to list it, so if you are restoring /wdn/file01 then you specify the alternate path as /restore/file01
Thanks
Rich

HT201304 If I forgot my password is there any way to remove the restrictions and backup my iPod from the computer? I tried reseting it to factory defaults and then backing it up but it still has the restrictions on.

I'm trying to remove my restrictions, and i reset it to factory default, but everytime i back it up the restrictions are still on. I don't want to have to register as a new ipod and loose everything i've bought and added.

- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
- Restore to factory settings/new iPod.
- If you are up to it see:
How to reset forgotten Restrictions...: Apple Support Communities
How to reset forgotten Restrictions...: Apple Support Communities

T2000 Firmware upgrade, factory default and RAID controller

1.
I got this during a "boot net".
equesting Internet Address for 0:14:4f:f:3c:3e
ERROR: /pci@7c0/pci@0/pci@1/pci@0,2/LSILogic,sas@2: Last Trap: Fast
Instruction Access MMU Miss
[Exception handlers interrupted, please file a bug]
[type 'resume' to attempt a normal recovery]
2.
I noticed that there was a withdrawn firmware upgrade 123482-01 is there going to be an -02?
with factory defaults set
ok > set-defaults
boot disk
doesn't work
3. How does the built-in RAID controller affect finding the boot block?

1 Please contact hardware support.
2 Here is a quote from the readme file for patch 123482-01
...not planning a Solaris upgrade or re-install, then there is no immediate need to downgrade your Sun System Firmware. You can wait for a scheduled maintenance cycle...
This statement is self explanatory, the firmware patches have an upgrade cycle.
3 Can you explain more about your issues? There are steps to be taken after initially creating a volume with raidctl so Solaris can use them, it is covered in a system Spectrum InfoDoc, did you login to Sunsolve?

I tried to reset my nano to the factory default and it says that I only have 1.7 gb

When I tried to sync my ipod to itunes it keeps giving me an error message and then I tried to reset it back to the factory, it says I have 5.5 gb used and 1.7gb left.

Conatct AppleCare Account Security. Contact numbers here:
http://support.apple.com/kb/HT5699?viewlocale=en_US

My iPad 1 is turning off an app and going back to the main screen at odd times. I've already updated it... to no avail. Do I need to reset it to factory defaults and reload everything?

It turns off many apps at random times.
Plus, it won't let me go to the next level of Plants and Zombies! I've played the same level about 15 times... it goes all the way through the level and then cuts out when it is giving me extra points for my lawn mowers. Then it goes to the main screen... then when I go back into the game... I'm at the beginning of the level all over again!
No fun!

I'm unsure what you mean but "factory reset" but first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

Will I have to pay for my apps again if I restore my ipad to factory default and whips?

Hi it seems that my restrictions password has been tampered with. I cannot acces restrictions. I now have to default using I tunes I believe. So when I do this I blieve it will while everything. So does that mean, the apps that I own, will I have to pay or again, or is it tracked somewhere what I own vs my apple ID?
Thanks
John b

As long as the apps are still available in the store then you can re-download them for free : re-downloading. Or you should be able to copy them over from your iPad to your computer's iTunes via File > Transfer Purchases and you can then just sync them back (it's useful to have a backup copy of your apps just in case they are removed from the store).

If I were to take Lion off of my 2008 Macbook Pro by reseting it to factory defaults, and if I were to want it back, would I have to pay for the OS again?

I've got an early 2008 Macbook Pro, which I believe initially came with Leopard. I put Lion on it last year, but now I need to partition my hard drive with Windows XP, and to my knowledge, there is no way to partition anything but Windows 7 when using BootCamp.
I don't love Lion, it's OK. I could sleep at night if I parted with it.
If I ever wanted it back, could I download it without having to buy it again since I've bought it once already?

No, because you bought Lion before. When you buy Lion, you can install it whenever you want in all your Macs

My ipod touch 4g does not show in Windows 7 or itunes. I've removed and reinstalled itunes, stopped and started apple mobile services and changed out cables. Ipod is charging when connected. I've also done a complete rollback to factory defaults.

My ipod touch 4g does not show in Windows 7 or itunes, I've removed and reinstalled Itunes. I've done a factory default, and I've changed out cables. The ipod shows connected but does not show.

Did you remove and reinstall all the Apple software by:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Run this to see if it helps determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if you have an iPod or computer problem'
Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

OneKey Factory Default and OEM Software

Similar Messages

Maybe you are looking for