Online Milestone status
Hi SD Gurus
Anybody pls help me ,
"Online Milestone status".-- Fixing Core Phase.
Pls send me Business process for this Pain Area.
Very Urgent.
Thanking you
with regards
pawan
A very easy way to overcome this is to set the "MANPATH" environment variable manually. The easiest way to do this is in /etc/profile.
Then you can include more files than your regular /usr/share/man. I usually add /usr/sfw/share/man, /opt/sfw/man and always /usr/java/man to it. For example like this:
# The profile that all logins get before using their own .profile.
trap "" 2 3
PATH=$PATH:$HOME/bin
MANPATH=/usr/share/man:/usr/sfw/share/man:/opt/sfw/man:/usr/java/man:/usr/perl5/
man:/usr/openwin/share/man:/usr/local/share/man
EDITOR=/usr/bin/vi
export LOGNAME PATH MANPATH EDITOR
(so basicly I edited the profile file and added those parts to it). Hope this is usefull for you.
Free bonus tip ;-)
If you logon using the logon manager from time to time (xdm / gdm) then beware that it will change your PATH lines internally. The easiest way to overcome this is creating the directory /etc/dt/config/Xsession.d and add a "profile like" file to it. Theoreticly you could even symlink the /etc/profile file but beware; your X environment needs a few paths to be present in the PATH at all time. The minimum being /usr/openwin/bin:/usr/dt/bin/.
Totally unrelated (or perhaps very vague) to your problem but since I'm currently looking at it myself I couldn't help wonder if you could use this as well ;-)
Similar Messages
-
Script for getting the online/offline status
Hi all,
After enabling checkbox of "Enable assistive access device" is possible to get the online/ offline status.From Menu we will get the status.Without doing this i want to get the apple mail account online/offline status.hope some help scripts for this.[That script|http://discussions.apple.com/message.jspa?messageID=11012484#11012484] could change the Online Status of all mail accounts. The following one will just report their Online Status. Is this what you are (were) asking for?
--BEGINNING OF SCRIPT
tell application "Mail" to activate
tell application "System Events" to tell process "Mail"
set theMenu to menu "Mailbox" of menu bar 1
if enabled of menu item "Take All Accounts Online" of theMenu then
return "All accounts are currently offline"
else
return "All accounts are currently online"
end if
end tell
--END OF SCRIPT -
Getting apple mail account online/offline status through apple script
Please let me know,If anyone have idea of getting apple mail account online / offline status through apple script.
mohammed jasum k p wrote:
Otherwise how to get the online/offline status value.If u can please give me a solution for this.
this is not possible by any means I know. not every problem has a solution, sorry. -
Mailbox online/offline status
All of a sudden my mailbox status changes from online to offline status spontaneously, i.e. I do not want the change and have not made it manually. I change it back to online, then all of a sudden it goes back to offline status.
What can be causing this? Having to correct the status time after time is aggravating.In doing some research, I am surprised at how many people in Panther AND BEYOND are having this problem: which is that a use of Mail causes one's mailboxes to be kicked offline. Seems no one has a real answer to the problem. Some have suggested there is a bug in the Mail application, but that hardly seems likely, as I have never had this happen in a period of 7 years until recent months. Sometimes the problems spontaneouly disappears, but then crops up again in a few weeks. Exasperating
-
Hi there, i am offline from skype, but when i click on the x, all the offline and online status is faded.
I have this problem also.
When I try the /showplaces command, I get the following line:
You have 1 online endpoints:
(here comes the details of my computer) Windows Skype
This is my computer.
There is no other live connection.
I tried the /remotelogout chat command but there's no other connection to close.
My partners see I am always online. The Online/Away/Do not disturb status are working but when I switched to Invisible or Offline status, the last used status is visible (online, away or do not disturb). When I select offline, the situation is the same: the last used status is visible to all of my partners. It is very annoying, they are calling me and asking why I didn't answer to their messages...
Have you got a _working_ solution to this problem? -
I met someone online. He is from Australia. After few chats using Skype, we decided not to communicate anymore for some personal reasons. I just noticed that after we ended our chat, everytime I will change my status to invisible, a i will then receive a notification that this person is online, then few seconds after, a notification that he went offline. If I change again my status to online, same online-offline notification will again appear. This is conssistetly happening to me. Weird part of it is... it only happens to this particular user. I never experienced this from my other contacts. Is there a possibility that the person I am talking to is a hacker?
Hi everybody and Supraja.
I am having the same issue. Anyone how can I solved it?
Thanks
Ivo -
Status of online redo log file INVALID warning appears during online backup
Hi All,
I have a peculiar problem in one of the SAP ECC 6.0 systems. The daily online backup is getting completed with warnings.
Please find below the warnings in DB12 logs:
BR0335W Status of online redo log file /oracle/AS0/mirrlogB/log_g18m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogB/log_g18m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogA/log_g50_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogA/log_g50_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogB/log_g51_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogB/log_g51_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogA/log_g52_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogA/log_g52_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogA/log_g53_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogA/log_g53_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogA/log_g54_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogA/log_g54_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogA/log_g55_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogA/log_g55_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogA/log_g56_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogA/log_g56_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogB/log_g57_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogB/log_g57_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogA/log_g58_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogA/log_g58_m2.dbf' not found
BR0335W Status of online redo log file /oracle/AS0/mirrlogB/log_g59_m2.dbf is INVALID
BR0274W File '/oracle/AS0/mirrlogB/log_g59_m2.dbf' not found
For the above mentioned alerts I followed the recommendations of SAP Note 491160. I dropped and recreated the mirrorlog files. But the next day again when I checked the backup it finished with warnings. At the database level there is no problem
SQL> select * from v$logfile;
GROUP# STATUS TYPE
MEMBER
IS_
59 ONLINE
/oracle/AS0/origlogB/log_g59_m1.dbf
NO
59 ONLINE
/oracle/AS0/mirrlogB/log_g59_m2.dbf
NO
GROUP# STATUS TYPE
MEMBER
IS_
58 ONLINE
/oracle/AS0/origlogA/log_g58_m1.dbf
NO
58 ONLINE
/oracle/AS0/mirrlogA/log_g58_m2.dbf
GROUP# STATUS TYPE
MEMBER
IS_
NO
57 ONLINE
/oracle/AS0/origlogB/log_g57_m1.dbf
NO
57 ONLINE
GROUP# STATUS TYPE
MEMBER
IS_
/oracle/AS0/mirrlogB/log_g57_m2.dbf
NO
56 ONLINE
/oracle/AS0/origlogA/log_g56_m1.dbf
NO
GROUP# STATUS TYPE
MEMBER
IS_
56 ONLINE
/oracle/AS0/mirrlogA/log_g56_m2.dbf
NO
55 ONLINE
/oracle/AS0/origlogA/log_g55_m1.dbf
NO
54 ONLINE
/oracle/AS0/origlogA/log_g54_m1.dbf
GROUP# STATUS TYPE
MEMBER
IS_
NO
54 ONLINE
/oracle/AS0/mirrlogA/log_g54_m2.dbf
NO
53 ONLINE
GROUP# STATUS TYPE
MEMBER
IS_
/oracle/AS0/origlogA/log_g53_m1.dbf
NO
53 ONLINE
/oracle/AS0/mirrlogA/log_g53_m2.dbf
NO
GROUP# STATUS TYPE
MEMBER
IS_
52 ONLINE
/oracle/AS0/origlogA/log_g52_m1.dbf
NO
52 ONLINE
/oracle/AS0/mirrlogA/log_g52_m2.dbf
NO
GROUP# STATUS TYPE
MEMBER
IS_
51 ONLINE
/oracle/AS0/origlogB/log_g51_m1.dbf
NO
51 ONLINE
/oracle/AS0/mirrlogB/log_g51_m2.dbf
GROUP# STATUS TYPE
MEMBER
IS_
NO
50 ONLINE
/oracle/AS0/origlogA/log_g50_m1.dbf
NO
50 ONLINE
GROUP# STATUS TYPE
MEMBER
IS_
/oracle/AS0/mirrlogA/log_g50_m2.dbf
NO
8 ONLINE
/oracle/AS0/origlogB/log_g18m1.dbf
As you can see from the above output at the database level everything is fine. So why during backup it is giving me warnings in DB12. Any help with this regard will be appreciated.
Regards
Mitesh NairHi Joe,
My OS is HP-UX. I dont think its a permission problem. Please find below the contents of origlogA and mirrlogA
predbci2:/oracle/AS0/origlogA#ls -rtl
total 1433712
drwxrwxrwx 2 oraas0 dba 96 Oct 15 03:27 cntrl
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 01:50 log_g52_m1.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 03:51 log_g50_m1.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 05:51 log_g54_m1.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 07:52 log_g53_m1.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 09:50 log_g55_m1.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 10:50 log_g56_m1.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 12:41 log_g58_m1.dbf
predbci2:/oracle/AS0/mirrlogA#ls -rtl
total 1433728
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 01:50 log_g52_m2.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 03:51 log_g50_m2.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 05:51 log_g54_m2.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 07:52 log_g53_m2.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 09:50 log_g55_m2.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 10:50 log_g56_m2.dbf
-rw-rw---- 1 oraas0 dba 104858624 Dec 4 12:41 log_g58_m2.dbf
Regards
Mitesh -
I love the way the Adobe Forum is structured where you can
see if a user is online or offline. I wish to produce the same
method. I have a list of users in my admin page where I see the...
Username | First Name | Last Name | E-mail
I wish to make a fifth column called status that would have
online or offline such as...
Username | First Name | Last Name | E-mail | Status |
MySQL statement looks as such...
CREATE TABLE `adminusers` (
`userID` int(11) NOT NULL auto_increment,
`userName` varchar(50) NOT NULL default '',
`userPassword` varchar(50) NOT NULL default '',
`emailAddress` varchar(50) NOT NULL default '',
`firstName` varchar(50) NOT NULL default '',
`lastName` varchar(50) NOT NULL default '',
`date` timestamp NOT NULL default CURRENT_TIMESTAMP,
`userTypeID` int(11) NOT NULL default '3',
PRIMARY KEY (`userID`)
) ENGINE=MyISAM DEFAULT CHARSET=utf8 AUTO_INCREMENT=1 ;
I believe that the online/offiline status is a boolean
statement but I am not sure and do not know how to incorporate it.
Can someone help me what I must do. Thank you all for your
help.AdonaiEchad wrote:
> I love the way the Adobe Forum is structured where you
can see if a user is
> online or offline.
There is no way that you can tell whether someone is online.
The web is
stateless. All that Adobe is doing is taking an arbitrary
time since
that individual either logged in or last clicked a link. It's
done by
updating a timestamp each time the visitor clicks a link.
Online or
offline status is determined by the time elapsed since the
last activity
(usually 5 or 10 minutes).
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
WiSM Status LED 1 & Status LED 2 showing off. Is it normal?
Hi,
WiSM WLAN Service Module WS-SVC-WISM-1-K9 in 6509e running VSS IOs s72033-ipservicesk9_wan-mz.122-33.SXI2a.bin having trouble to get the IP from service-vlan DHCP also status LED 1 & Status LED 2 showing off.
The pertinent config is as follows.
vlan 300
name WiSM_Service_Vlan
interface Vlan300
description *** WiSM Service-Vlan
ip address 192.168.200.1 255.255.255.0
ip dhcp excluded-address 192.168.200.1
ip dhcp pool WiSM_Service-Vlan_300
network 192.168.200.0 255.255.255.0
default-router 192.168.200.1
wism service-vlan 300
vlan 183
name WiSM_Management
interface Vlan183
description *** WiSM Management Vlan ***
ip address 10.39.139.254 255.255.255.0
wism switch 1 module 4 controller 1 allowed-vlan 125,126,183,300
wism switch 1 module 4 controller 2 allowed-vlan 125,126,183,300
wism switch 2 module 4 controller 1 allowed-vlan 125,126,183,300
wism switch 2 module 4 controller 2 allowed-vlan 125,126,183,300
wism switch 1 module 4 controller 1 native-vlan 183
wism switch 1 module 4 controller 2 native-vlan 183
wism switch 2 module 4 controller 1 native-vlan 183
wism switch 2 module 4 controller 2 native-vlan 183
HO2NET0001#sh wism status
Service Vlan : 300, Service IP Subnet : 192.168.200.1/255.255.255.0
WLAN
Slot Controller Service IP Management IP SW Version Status
----+-----------+----------------+----------------+-----------+---------------
20 1 0.0.0.0 0.0.0.0 Service Port Up
20 2 0.0.0.0 0.0.0.0 Service Port Up
HO2NET0001#sh module
Mod Ports Card Type Model Serial No.
1 8 CEF720 8 port 10GE with DFC WS-X6708-10GE SAL13442Q5N
2 8 CEF720 8 port 10GE with DFC WS-X6708-10GE SAL13442GAL
3 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL13410N8P
4 10 WiSM WLAN Service Module WS-SVC-WISM-1-K9 SAD133101UY
5 5 Supervisor Engine 720 10GE (Active) VS-S720-10G SAL13442JE4
Mod MAC addresses Hw Fw Sw Status
1 0025.84f1.55b8 to 0025.84f1.55bf 2.1 12.2(18r)S1 12.2(33)SXI2 Ok
2 0025.84f1.4e58 to 0025.84f1.4e5f 2.1 12.2(18r)S1 12.2(33)SXI2 Ok
3 0027.0da7.c240 to 0027.0da7.c26f 3.2 12.2(18r)S1 12.2(33)SXI2 Ok
4 0023.5e25.7168 to 0023.5e25.7177 2.3 12.2(14r)S5 12.2(33)SXI2 Ok
5 001f.9e2a.2608 to 001f.9e2a.260f 3.1 8.5(3) 12.2(33)SXI2 Ok
Mod Sub-Module Model Serial Hw Status
1 Distributed Forwarding Card WS-F6700-DFC3C SAL13442EG9 1.4 Ok
2 Distributed Forwarding Card WS-F6700-DFC3C SAL13442H9T 1.4 Ok
3 Centralized Forwarding Card WS-F6700-CFC SAL13442HU9 4.1 Ok
4 Centralized Forwarding Card WS-SVC-WISM-1-K9-D SAD133200D6 2.1 Ok
5 Policy Feature Card 3 VS-F6K-PFC3C SAL13442E5S 1.1 Ok
5 MSFC3 Daughterboard VS-F6K-MSFC3 SAL13421AJZ 2.0 Ok
Mod Online Diag Status
1 Pass
2 Pass
3 Pass
4 Pass
5 Pass
HO2NET0001#sh vlan
300 WiSM_Service_Vlan active Gi1/4/9, Gi1/4/10
The service IP is supposed to have been populated with an address from the dhcp pool. I am also unable to connect to access it by console as well as doing a session switch 1 slot 4 processor 1. I get the following upon attempting to do so:
Through Console.
It is giving following & then got stuck.
Bootloader 3.2.202.0 (Nov 13 2007 - 19:35:12)
Motorola PowerPC ProcessorID=00000000 Rev. PVR=80200020
CPU: 999 MHz
CCB: 333 MHz
DDR: 166 MHz
LBC: 41 MHz
L1 D-cache 32KB, L1 I-cache 32KB enabled.
I2C: ready
DTT: 1 is 33 C
DRAM: DDR module detected, total size:512MB.
512 MB
8540 in PCI Host Mode.
8540 not PCI Arbiter.
Memory Test PASS
FLASH:
Flash Bank 0: portsize = 2, size = 8 MB in 142 Sectors
8 MB
L2 cache enabled: 256KB
Card Id: 1537
Card Revision Id: 1
Card CPU Id: 1287
Number of MAC Addresses: 32
Number of Slots Supported: 4
Serial Number: FAM133200D6
Manufacturers ID: 30464
Board Maintenance Level: 00
In: serial
Out: serial
Err: serial
.o88b. d888888b .d8888. .o88b. .d88b.
d8P Y8 `88' 88' YP d8P Y8 .8P Y8.
8P 88 `8bo. 8P 88 88
8b 88 `Y8b. 8b 88 88
Y8b d8 .88. db 8D Y8b d8 `8b d8'
`Y88P' Y888888P `8888Y' `Y88P' `Y88P'
Model SVC-WiSM S/N: FAM133200D6
Net: TSEC ETHERNET
IDE: Bus 0: OK
Device 0: Model: STI Flash 8.0.0 Firm: 01/17/07 Ser#: STI1MMJ109198093647
Type: Removable Hard Disk
Capacity: 488.7 MB = 0.4 GB (1000944 x 512)
Device 1: not available
Booting Primary Image...
Press <ESC> now for additional boot options...
Detecting Hardware . . .
Cryptographic library self-test....passed!
XML config selected
Validating XML configuration
Cisco is a trademark of Cisco Systems, Inc.
Software Copyright Cisco Systems, Inc. All rights reserved.
Cisco AireOS Version 5.2.178.0
Initializing OS Services: ok
Initializing Serial Services: ok
Initializing Internal Interfaces: ok
Initializing Network Services: ok
Initializing Licensing Services: ok
Starting ARP Services: ok
Starting Trap Manager: ok
Starting Network Interface Management Services: ok
Starting System Services: ok
Starting FIPS Features: ok : Not enabled
Starting Fast Path Hardware Acceleration: ok
Starting Switching Services: ok
Starting QoS Services: ok
Starting Policy Manager: ok
Starting Data Transport Link Layer: ok
Starting Access Control List Services: ok
Starting System Interfaces: ok
Starting Client Troubleshooting Service: ok
Starting Management Frame Protection: ok
Starting LWAPP: ok
Starting CAPWAP: ok
Starting Certificate Database: ok
Starting VPN Services: ok
Starting Security Services: ok
Starting Policy Manager: ok
Starting Authentication Engine: ok
Starting Mobility Management: ok
Starting LOCP: ok
Starting Virtual AP Services: ok
Starting AireWave Director: ok
Starting Network Time Services: ok
Starting Cisco Discovery Protocol: ok
Starting Broadcast Services: ok
Starting Logging Services: ok
Starting DHCP Server: ok
Starting IDS Signature Manager: ok
Starting RFID Tag Tracking: ok
Starting WLAN Control Protocol (WCP): ok
Starting Mesh Services: ok
Starting TSM: ok
Starting CIDS Services: ok
Starting Ethernet-over-IP: ok
Starting DTLS server: enabled in CAPWAP
Starting FMC HS: ok
Starting WIPS: ok
Starting SSHPM LSC PROV LIST: ok
Starting Management Services:
Web Server: ok
CLI: ok
Secure Web: Web Authentication Certificate not found (error). If you cannot access management interface via HTTPS please reconfigure Virtual Interface.
(Cisco Controller)
Welcome to the Cisco Wizard Configuration Tool
Use the '-' character to backup
Would you like to terminate autoinstall? [yes]:
AUTO-INSTALL: starting now...
Through Session
HO2NET0001##session switch 1 slot 4 proc 1
The default escape character is Ctrl-^, then x. You can also type 'exit' at the remote prompt to end the session Trying 0.0.0.0 ...
Any assistance or ideas offered will be greatly appreciated.
Thanks,Hi Tabish,
How many times do you have to open this same topic?
In my opinion, this is your THIRD thread for the same topic. -
Resizing online and standby redo log in dataguard setup.
In 10gr2 dataguard i would like to increase redo logsize from 50M to 100M.
on primary
standby_file_management=manual
added online redo groups with 100M
log switched
drop old one and readded with 100m
deleted log added in step2.
same for standby redo logs.
On standby
was able to resize standby redo logs.
but cannot resize online redologs status is clearing or clearing_current.
please comment. thanks.I assume you just had to wait until the Primary switched out of that online log so it became inactive at the standby as well? We track where the Primary is by marking the online redo log files at the standby as clearing_current so you can tell where the primary was at any given moment.
Make sure you create new standby redo log files at the Primary and Standby to match the new online redo log file size.
Larry -
Print invoice for bought online products
Hi,
not sure if this is the right section...anyway I bought me MBP in the online store (via the website of apple). Unfortunately, it shipped without an invoice. I expected to be able to print it by myself then via the online store. Indeed this option can be found in the account menu, but everytime I click on it I end up on the website that shows me the history of made orders of the past x-days without seeing any button or hint whatsoever that allows me to print a bill for a bought product.
I really need a printed invoice - how do I get it?
Regards,View or Print Invoice
Once an item is billed, Apple creates an invoice. You can view or print individual invoices for each item on your order.
To view or print your invoice, log in to online Order Status and click the View Orders button. Click the Print Invoices link on the Your Orders page to get a printable image of your invoice(s).
If you need assistance with viewing or printing your invoice, please contact an Apple Online Store representative 1-800-676-2775. -
Whole Database Online + redo log backup: How Long?
Hi gurus,
There's something I want to ask about online backup with redo log.
If i'm correct, redo log file is created everytime there's operation that change datafile right?
If i schedule this type of backup everyday, it means it will backup all datafiles, along with redo log file when transaction take places, at my pre-defined hours, right?
Then here's what i'm confused about. When will this backup process finished? Is it when all the datafiles have been backed up? Then how about the redo log files? If there are users that keep making transaction (therefore make change to datafiles), new redo log files will be created on disk, and that will prevent the backup process to finish. Then when will this cycle come to an end?
Please confirm if my grasp about oracle online backup is correct or not, and provide explanation to satisfy my curiousity.
Thanks gurus,
Edited by: Bobby Gunawan on Jan 6, 2009 10:16 AMHello Fidel,
i am feeling honored
> Keep in mind that the only thing where a DBA cannot make mistakes is restore/recovery and this depends on your backups
In general i would say you are right, but i have seen already one case where this statement is not true.
Some time ago i got a call from a colleague where his database crashed, the online redolog files were corrupted and the recovery was not working.
If you don't look really close at this point you are in trouble and can not continue the recovery. Let explain this on a example.
This demonstration is done on an oracle 10.2.0.4, but it work on every other version too.
Let's simulate a crash
SQL> shutdown abort;
Corrupt/delete a specifc redolog file
SQL> startup
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: '/oracle/TST/oradata/redolog/redo03.log'
ORA-27037: unable to obtain file status
Ok - so far so good, lets check the groups and files
SQL> select GROUP#, STATUS, MEMBER from v$logfile where TYPE = 'ONLINE';
GROUP# STATUS MEMBER
1 /oracle/TST/oradata/redolog/redo01.log
2 /oracle/TST/oradata/redolog/redo02.log
3 /oracle/TST/oradata/redolog/redo03.log
SQL> select * from v$log;
GROUP# THREAD# SEQUENCE# BYTES MEMBERS ARC STATUS FIRST_CHANGE# FIRST_TIM
1 1 95 52428800 1 NO CURRENT 5117817 06-JAN-09
3 1 94 52428800 1 YES ACTIVE 5117814 06-JAN-09
2 1 93 52428800 1 YES ACTIVE 5112855 15-DEC-08
What's the situation?
The online redolog file of group 3 is lost/corrupted and this group is needed to perform a complete recovery (see status ACTIVE).
But you are lucky, because of this group 3 is already archived - so you can perform a complete recovery.
Now let's perform a complete recovery but with UNTIL clause (because we need to jump between the online and archived redologfiles)
SQL> recover database until cancel;
ORA-00279: change 5116194 generated at 01/06/2009 21:06:48 needed for thread 1
ORA-00289: suggestion : /oracle/TST/oraarch/TST_1_93_6b8c0516_666969185.arc
ORA-00280: change 5116194 for thread 1 is in sequence #93
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00279: change 5117814 generated at 01/06/2009 21:08:47 needed for thread 1
ORA-00289: suggestion : /oracle/TST/oraarch/TST_1_94_6b8c0516_666969185.arc
ORA-00280: change 5117814 for thread 1 is in sequence #94
ORA-00278: log file '/oracle/TST/oraarch/TST_1_93_6b8c0516_666969185.arc' no longer needed for this recovery
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00279: change 5117817 generated at 01/06/2009 21:08:51 needed for thread 1
ORA-00289: suggestion : /oracle/TST/oraarch/TST_1_95_6b8c0516_666969185.arc
ORA-00280: change 5117817 for thread 1 is in sequence #95
ORA-00278: log file '/oracle/TST/oraarch/TST_1_94_6b8c0516_666969185.arc' no longer needed for this recovery
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/oracle/TST/oradata/redolog/redo01.log
Log applied.
Media recovery complete.
Now execute an OPEN NORESETLOGS accidentally (maybe the dba think it is not necessary because of the complete recovery) and try an OPEN RESETLOGS after:
SQL> alter database open noresetlogs;
alter database open noresetlogs
ERROR at line 1:
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: '/oracle/TST/oradata/redolog/redo03.log'
ORA-27037: unable to obtain file status
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
So now you are lost.. you can't execute an UNTIL CANCEL anymore which would be needed to perform a successful OPEN RESETLOGS.
In this special case you can do mistakes and you have to restore the whole database and perform the same recovery again and end with OPEN RESETLOGS.
Just for information
Regards
Stefan -
I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.
Hi,
Did it happen all the time or sometime?
Please check online browser status:
Click Volume icon in the taskbar, click Mixer link button as below:
If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
Tips for fixing common sound problems
http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
Meanwhile, this similar thread also could be referred:
https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Contacts' Status Changes when I change mine
I'm a newbie to Skype. I mostly use the desktop version on a Windows 8.1 laptop but also have the Skype app on my Android phone. The problem occurs on the laptop.
When I sign into Skype and change my status to "online" the status of one of my contacts instantly changes to "online" as well. Similarly, when I manually change my status to "offline", my contact's status changes to "offline" immediately. So, when I think they're online and available for a video call, they're really not listening and my call goes unanswered. In fact, after this happened several times, I finally emailed the contact who promptly replied that their computer had been off during the days when I'd tried to call.
What's the fix for this, fellow Skypers?There is no fix that you can apply. The issue is on Skype network.
http://community.skype.com/t5/Security-Privacy-Trust-and/Skype-invading-and-changing-people-s-online... -
Plz hlp: online even though I sign out and can't r...
I have a 2 problums in skype.
1.i sign out skype bit friends told me ur onlin in skype why r this problum? 2.i skype cal him any friends but not cal activ , then any friends cal me in skype but not complet cal only miss cal so plz solvr my problum what can i do?
My E mail [Redacted for privacy]
my skype id [Redacted for privacy]
Subject/title of post edited to better reflect post content.
First things, first: for your safety and protection, please never, ever include any personally identifiable information such as your real name, Skype account name, e-mail address, or a telephone number in a post on a public Community or forum such as this.Hi, Sajid.ali283, and welcome to the Community,
For your benefit, please review our Community Guidelines for a better understanding of why I needed to redact your post as I did.
The online/offline status problem is a known issue in the most recent versions of Skype. Many people work around this by setting their status to "invisible" prior to signing out, although on mobile versions where this setting is not available, this would not work.
For not being able to place or receive calls, please start a new topic on the message board which matches the operating system upon which you use Skype. Best practice in these types of on-line communities is one enquiry per discussion or "thread." Thanks!
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!
Maybe you are looking for
-
I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen. I don't want it to be an EEM Event, I just want to run it from the (tcl)# prompt. So I guess I'm asking if you can use cli_exec and ot
-
Quicktime will not load Apple iPhone OS4 Keynote from Safari
(iMac) I have been trying to watch the OS4 keynote off the apple website for a few days now. When i press watch it loads up quicktime and all i get is a white background with a quicktime logo with a loading dotted bar at the bottom. It does this with
-
Missing filters in the trial version of Illustrator CS6?
I am using Windows 8 and can not find render or lighting effects in the filters. any ideas?
-
Nested loop join v/s Sort merge
I have seen that nested loops are better if the inner table is being indexed, because for each outer table row, we are looking for a match in the inner table. But is there any case when optimizer still goes for a nested loop even if there is no index
-
No Bluetooth tab in "Access Connections"
Hi, I have a new W500 - my first Thinkpad for a while (last one was a 600e). I am getting on fine with it except I am having trouble using Bluetooth. I can only get to the vanilla windows bluetooth.As I understand it I should be able tosee a Bluetoot