Open a web page and pass values from a java file
Hi,
I need to open a web page and pass values in the text boxes.
Finally submit needs to be triggered. All this needs to be done from a java file. i.e instead of entering my values in a web page and submit, i need to do it from my java file..
Any inputs so that I proceed in the right direction..or is there any alternate way to achive this ??
Thanks in advance..
Sid
I hava found a lines of jaa that can open a URL , lets say www.net.java
You can open it writable or not.
It is half of the job you need.
If you are interested.
I am wrinting a program to print a URL , and have developed this small
code.
Angel Portal
Similar Messages
-
I have a Mac Air, and I opened a web page in Safari and it died before the page could load, then I got the spinning beach ball for about 40 minutes so I turned it off. Now When I turn it on I get the chime, a grey screen, then the apple, then the pin wheel -its been going now for an hour.
Any help greatly appreciatedThere are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot into Recovery (command-R at startup; 10.7 or later), from a local Time Machine backup volume (option key at startup; 10.7.2 or later), or from your installation disc (C key at startup; 10.6.8 or earlier.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data. -
How do I open a web page in Adobe Reader from ipad2? I don't see any buttons to click. I'm new user
How do I open a web page in Adobe Reader? I got the app for ipad2, but when a page says I need a certain version of AR, I don't know what to do. I'm a new user and don't know if I have to "open" AR and it automatically reads whatever doc I have up on the web, or is it always running and any web page I'm on should show a button to click in order to open the page in AR?
If a website says that you need a certain version of Adobe Reader, it is probably attempting to detect whether or not you have the Adobe Reader browser plugin installed. This is something that only works on desktop systems where browser plugins exist. Since browser plugins don't exist on mobile, website developers should take care to present different messages and provide different options for downloading PDF's when visited by mobile browsers. I recommend contacting the website owner and requesting that they implement access for mobile devices.
-
Linking 2 WebI reports and passing values
Hi All,
I have an issue here.As I have 2 reports in WebI created and report1 will be a summary report and i have a object in report1 which is like a hyperlink like for eg 2001,2002,2003 and when i click on 2001 it should open up the report2 and give the Quarter,Q2,Q3,Q4.
Regards
PrashantHi Prashant,
U will have to use the concept of OpenDocument API.
Following are the steps for your question/difficulty.
1. Open a report in webi having an object year.
2.Open another report and have the objects year and quarter.
Type the below link in the Formula toolbar. The syntax is as follows.
="<a href=http://Server Name/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?sType=wid&sDocName=Name Of The Second Reprt Try save this without space&s&lsSEnterYear:="[Year]">"[Year]+"</a>"
and in the properties window in the Read Cell Content As choose hyperlink.
You will get exactly what your ver looking for.
Hopefully this solves your problem.
Regards,
Bernard.
Edited by: Florencio Sequeira on Jun 20, 2008 2:24 PM -
How to have an Oracle procedure send and receive value from a java program.
The below procedure is place inside a package. This procedure "get_extract_ready_headers " is selecting columns store_number, terminal_number, tran_number, tran_date, cust_id from the source REX_HEAD_EXTRACT table. This information is selected into a ref cursor. The data has cust_id field which is encrypted. How do I modify the procedure get_extract_ready_headers and accomplish 2 things?
1. Make this procedure to read the "cust_id" value from the source table and send the value to a Java program "getheaderinfo" (this java program decrypts the cust_id field).
2. When we get the unencrypted value back from the Java program, make the procedure accept this decrypted value and use it to update CUST_ID value in the target table TRAN_HEAD table. I am using Oracle 11.2.0.2, and TOAD 10.5.1.3.
-- Procedural code
PROCEDURE get_extract_ready_headers (p_records OUT SYS_REFCURSOR)
IS
BEGIN
OPEN p_records FOR
SELECT store_number, terminal_number, tran_number, tran_date, cust_id FROM REX_HEAD_EXTRACT;
END;--Table Structure for source table REX_HEAD_EXTRACT
CREATE TABLE REX_HEAD_EXTRACT
REX_SEQ_NBR NUMBER(20),
REVISION_NUMBER NUMBER,
DAY NUMBER(3),
RESA_TRAN_SEQ_NO NUMBER(20),
BUSINESS_DATE DATE,
TRAN_SEQ_NBR NUMBER(12),
ORG_NUMBER NUMBER,
STORE_NUMBER NUMBER,
TRAN_DATE DATE,
TERMINAL_NUMBER NUMBER,
TRAN_NUMBER NUMBER,
TRAN_TIME DATE,
BATCH_NUMBER VARCHAR2(8 BYTE),
BATCH_TYPE VARCHAR2(4 BYTE),
TRAN_TYPE VARCHAR2(4 BYTE),
SUB_TRAN_TYPE VARCHAR2(4 BYTE),
CLERK_CODE VARCHAR2(15 BYTE),
TRAN_TAXABLE_AMOUNT NUMBER(12,2),
TRAN_TAX_TOTAL NUMBER(12,2),
TRAN_GROSS_TOTAL NUMBER(12,2),
COUP_TOTAL NUMBER(9,2),
MKD_TOTAL NUMBER(9,2),
EMPLOYEE_NUMBER VARCHAR2(15 BYTE),
EMPLOYEE_NAME VARCHAR2(40 BYTE),
TRAN_ALTTAXABLE_AMOUNT NUMBER(12,2),
TRAN_ALTTAX_TOTAL NUMBER(12,2),
SALE_AMOUNT NUMBER(9,2),
RETURN_AMOUNT NUMBER(9,2),
RETURNED_AMOUNT NUMBER(9,2),
NETCASH NUMBER(12,2),
TENDER_CODE VARCHAR2(4 BYTE),
MULT_RCPT VARCHAR2(1 BYTE),
SPLIT_TENDER VARCHAR2(1 BYTE),
RTN_WITH_PURCHASE VARCHAR2(1 BYTE),
RTN_WITH_RCPT VARCHAR2(1 BYTE),
REASON_CODE VARCHAR2(4 BYTE),
PASSWORD VARCHAR2(10 BYTE),
RINGTIME DATE,
CUST_NUMBER VARCHAR2(12 BYTE),
CUST_ID VARCHAR2(50 BYTE),
ZIP_CODE NUMBER,
POSTAL_CODE VARCHAR2(9 BYTE),
PV_TIME_LAPSE NUMBER,
ORIG_STORE_NBR NUMBER,
ORIG_TRAN_DATE DATE,
ORIG_TRAN_TYPE VARCHAR2(4 BYTE),
ORIG_TERM_NBR NUMBER,
ORIG_TRAN_NBR NUMBER,
ORIG_SALE_AMT NUMBER(12,2),
ORIG_TENDER_CODE VARCHAR2(4 BYTE),
ORIG_CLERK_CODE VARCHAR2(15 BYTE),
PREV_TRAN_TYPE VARCHAR2(4 BYTE),
PREV_SUB_TRAN_TYPE VARCHAR2(4 BYTE),
GIFT_REGISTRY_ID VARCHAR2(25 BYTE),
NO_OF_ITEMS NUMBER,
TAX_EXEMPT_ID VARCHAR2(18 BYTE),
TRAN_RINGTIME NUMBER,
AUDITED VARCHAR2(1 BYTE),
BATCH_VERSION NUMBER(9,2),
BATCH_SOURCE VARCHAR2(5 BYTE),
CREATE_DATE DATE,
CREATE_ID VARCHAR2(32 BYTE),
CREATE_PROC VARCHAR2(32 BYTE),
MOD_DATE DATE,
MOD_ID VARCHAR2(32 BYTE),
MOD_PROC VARCHAR2(32 BYTE),
TERMINAL_GROUP NUMBER,
USER_DEF_1 NUMBER,
USER_DEF_2 NUMBER,
USER_DEF_3 NUMBER,
USER_DEF_4 NUMBER(12,2),
USER_DEF_5 NUMBER(12,2),
USER_DEF_6 NUMBER(12,2),
USER_DEF_7 VARCHAR2(50 BYTE),
USER_DEF_8 VARCHAR2(50 BYTE),
USER_DEF_9 VARCHAR2(50 BYTE),
MANAGER_NUMBER VARCHAR2(15 BYTE),
MANAGER_REASON_CODE VARCHAR2(10 BYTE),
MANAGER_SWIPED VARCHAR2(1 BYTE),
PHONE_NO NUMBER(11),
KCPOS_KTH_USER_101 NUMBER,
KCPOS_KTH_USER_102 NUMBER,
KCPOS_KTH_USER_103 NUMBER,
KCPOS_KTH_USER_104 NUMBER,
KCPOS_KTH_USER_105 NUMBER,
KCPOS_KTH_USER_106 NUMBER,
KCPOS_KTH_USER_107 NUMBER,
KCPOS_KTH_USER_108 NUMBER,
KCPOS_KTH_USER_109 NUMBER,
KCPOS_KTH_USER_110 NUMBER,
KCPOS_KTH_USER_201 NUMBER(12,2),
KCPOS_KTH_USER_202 NUMBER(12,2),
KCPOS_KTH_USER_203 NUMBER(12,2),
KCPOS_KTH_USER_204 NUMBER(12,2),
KCPOS_KTH_USER_205 NUMBER(12,2),
KCPOS_KTH_USER_206 NUMBER(12,2),
KCPOS_KTH_USER_207 NUMBER(12,2),
KCPOS_KTH_USER_208 NUMBER(12,2),
KCPOS_KTH_USER_209 NUMBER(12,2),
KCPOS_KTH_USER_210 NUMBER(12,2),
KCPOS_KTH_USER_301 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_302 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_303 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_304 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_305 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_306 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_307 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_308 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_309 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_310 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_401 DATE,
KCPOS_KTH_USER_402 DATE,
KCPOS_KTH_USER_403 DATE,
DISC_TOTAL NUMBER(9,2)
CREATE INDEX REX_HEAD_EXTRACT_NDX ON REX_HEAD_EXTRACT
(REX_SEQ_NBR, REVISION_NUMBER, STORE_NUMBER, TRAN_DATE, TERMINAL_NUMBER, TRAN_NUMBER)-- Create table DDL for target table TRAN_HEAD
CREATE TABLE NAVISTOR.KCPOS_TRAN_HEADER_BASE
TRAN_SEQ_NBR NUMBER(12),
ORG_NUMBER NUMBER,
STORE_NUMBER NUMBER,
TRAN_DATE DATE,
TERMINAL_NUMBER NUMBER,
TRAN_NUMBER NUMBER,
TRAN_TIME DATE,
BATCH_NUMBER VARCHAR2(8 BYTE),
BATCH_TYPE VARCHAR2(4 BYTE),
TRAN_TYPE VARCHAR2(4 BYTE),
SUB_TRAN_TYPE VARCHAR2(4 BYTE),
CLERK_CODE VARCHAR2(15 BYTE) NOT NULL,
TRAN_TAXABLE_AMOUNT NUMBER(12,2),
TRAN_TAX_TOTAL NUMBER(12,2),
TRAN_GROSS_TOTAL NUMBER(12,2),
COUP_TOTAL NUMBER(9,2),
MKD_TOTAL NUMBER(9,2),
EMPLOYEE_NUMBER VARCHAR2(15 BYTE),
EMPLOYEE_NAME VARCHAR2(40 BYTE),
TRAN_ALTTAXABLE_AMOUNT NUMBER(12,2),
TRAN_ALTTAX_TOTAL NUMBER(12,2),
SALE_AMOUNT NUMBER(9,2),
RETURN_AMOUNT NUMBER(9,2),
RETURNED_AMOUNT NUMBER(9,2),
NETCASH NUMBER(12,2),
TENDER_CODE VARCHAR2(4 BYTE),
MULT_RCPT VARCHAR2(1 BYTE),
SPLIT_TENDER VARCHAR2(1 BYTE),
RTN_WITH_PURCHASE VARCHAR2(1 BYTE),
RTN_WITH_RCPT VARCHAR2(1 BYTE),
REASON_CODE VARCHAR2(4 BYTE),
PASSWORD VARCHAR2(10 BYTE),
RINGTIME DATE,
CUST_NUMBER VARCHAR2(12 BYTE),
CUST_ID VARCHAR2(50 BYTE) ENCRYPT USING 'AES256' NO SALT,
ZIP_CODE NUMBER,
POSTAL_CODE VARCHAR2(9 BYTE),
PV_TIME_LAPSE NUMBER,
ORIG_STORE_NBR NUMBER,
ORIG_TRAN_DATE DATE,
ORIG_TRAN_TYPE VARCHAR2(4 BYTE),
ORIG_TERM_NBR NUMBER,
ORIG_TRAN_NBR NUMBER,
ORIG_SALE_AMT NUMBER(12,2),
ORIG_TENDER_CODE VARCHAR2(4 BYTE),
ORIG_CLERK_CODE VARCHAR2(15 BYTE),
PREV_TRAN_TYPE VARCHAR2(4 BYTE),
PREV_SUB_TRAN_TYPE VARCHAR2(4 BYTE),
GIFT_REGISTRY_ID VARCHAR2(25 BYTE),
NO_OF_ITEMS NUMBER,
TAX_EXEMPT_ID VARCHAR2(18 BYTE),
TRAN_RINGTIME NUMBER,
AUDITED VARCHAR2(1 BYTE),
BATCH_VERSION NUMBER(9,2),
BATCH_SOURCE VARCHAR2(5 BYTE),
CREATE_DATE DATE,
CREATE_ID VARCHAR2(32 BYTE),
CREATE_PROC VARCHAR2(32 BYTE),
MOD_DATE DATE,
MOD_ID VARCHAR2(32 BYTE),
MOD_PROC VARCHAR2(32 BYTE),
TERMINAL_GROUP NUMBER,
USER_DEF_1 NUMBER,
USER_DEF_2 NUMBER,
USER_DEF_3 NUMBER,
USER_DEF_4 NUMBER(12,2),
USER_DEF_5 NUMBER(12,2),
USER_DEF_6 NUMBER(12,2),
USER_DEF_7 VARCHAR2(50 BYTE),
USER_DEF_8 VARCHAR2(50 BYTE),
USER_DEF_9 VARCHAR2(50 BYTE),
MANAGER_NUMBER VARCHAR2(15 BYTE),
MANAGER_REASON_CODE VARCHAR2(10 BYTE),
MANAGER_SWIPED VARCHAR2(1 BYTE),
PHONE_NO NUMBER(11),
KCPOS_KTH_USER_101 NUMBER,
KCPOS_KTH_USER_102 NUMBER,
KCPOS_KTH_USER_103 NUMBER,
KCPOS_KTH_USER_104 NUMBER,
KCPOS_KTH_USER_105 NUMBER,
KCPOS_KTH_USER_106 NUMBER,
KCPOS_KTH_USER_107 NUMBER,
KCPOS_KTH_USER_108 NUMBER,
KCPOS_KTH_USER_109 NUMBER,
KCPOS_KTH_USER_110 NUMBER,
KCPOS_KTH_USER_201 NUMBER(12,2),
KCPOS_KTH_USER_202 NUMBER(12,2),
KCPOS_KTH_USER_203 NUMBER(12,2),
KCPOS_KTH_USER_204 NUMBER(12,2),
KCPOS_KTH_USER_205 NUMBER(12,2),
KCPOS_KTH_USER_206 NUMBER(12,2),
KCPOS_KTH_USER_207 NUMBER(12,2),
KCPOS_KTH_USER_208 NUMBER(12,2),
KCPOS_KTH_USER_209 NUMBER(12,2),
KCPOS_KTH_USER_210 NUMBER(12,2),
KCPOS_KTH_USER_301 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_302 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_303 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_304 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_305 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_306 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_307 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_308 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_309 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_310 VARCHAR2(50 BYTE),
KCPOS_KTH_USER_401 DATE,
KCPOS_KTH_USER_402 DATE,
KCPOS_KTH_USER_403 DATE,
DISC_TOTAL NUMBER(9,2),
RTA_RTN_AUTCOD VARCHAR2(4 BYTE),
RTA_RTN_COMMID NUMBER,
RTA_RTN_EVNTID NUMBER,
RTA_RTN_QTY NUMBER,
RTA_RTN_RCPT_SCAN VARCHAR2(1 BYTE),
RTA_RTN_REFUND_AMT NUMBER(9,2),
RTA_RTN_TYPE_CODE VARCHAR2(4 BYTE),
RTA_RTN_WITH_RCPT VARCHAR2(1 BYTE),
RTA_RTN_COUNT INTEGER,
SDEDVAL1 VARCHAR2(50 BYTE)
)--sample data
REX_SEQ_NBR,REVISION_NUMBER,DAY,RESA_TRAN_SEQ_NO,BUSINESS_DATE,TRAN_SEQ_NBR,ORG_NUMBER,STORE_NUMBER,TRAN_DATE,TERMINAL_NUMBER,
TRAN_NUMBER,TRAN_TIME
478,1,11,12024005,6/11/2012,,1,692,6/11/2012,155,5,6/11/2012 12:57:17 PM,
479,1,11,12024006,6/11/2012,,1,692,6/11/2012,155,6,6/11/2012 2:01:51 PM,
480,1,11,12024007,6/11/2012,,1,692,6/11/2012,155,7,6/11/2012 2:47:10 PMAssuming that SomeJavePgm is a Java stored function (not a Java program running outside the database) and that it takes as a parameter whatever data type CUST_ID is in TABLE_A (hopefully RAW but potentially VARCHAR2) and returns a string, you would call it just as you would a PL/SQL stored function
INSERT INTO table_b( cust_id, <<other columns>> )
SELECT SomeJavaPgm( a.cust_id ), <<other columns>>
FROM table_a aIf SomeJavePgm is not a Java stored procedure, calling it from PL/SQL becomes much more complicated. You would need whatever machine hosts this program to expose an appropriate API (for example, a web service interface) that you could invoke via UTL_HTTP). You'd need to tell us what that API was, however.
Justin -
How to pass values from single Databank file across different scripts?
Hi Guys,
I have a question regarding using single databank file across different scripts.
Lets say there 5 web service scripts and these are very generic scripts where the input/request xml schema of each script is parameterized without having any databank as script asset.
These 5 web service scripts are like library functions and so we dont want to attach any databank as script asset.
However I have a driver script to call all of these 5 library scripts and now I attach a databank (a .csv file) to the driver script as script asset. Say this .csv file has got 10 different columns with just single record/row.
As and when the function call goes to those 5 scripts i.e one by one, then based on the function call the corresponding columns are used and the data for those columns must be read.
Is there any solution to acheive this?
Faster help is highly appreciated.Hi JB,
what i was looking for, was an approach to use a databank file (.csv file) in a parent script and then by reading that .csv file, the data should be moved from the parent script to individual child scripts.
The child scripts are very generic scripts and are like library functions which are not data dependent. they are fully parameterized and they dont have any sort of databank attached to them.
Now the question is if the databank has got 10 columns where first 3 columns belong to one child script, second 3 columns belong to 2nd child script and so on.
Then how do we pass the values from parent script to a child script and what is the best/recommended approach. -
How to pass value from the jsp file to a java bean
I have huge promblem .I want to pass value of combo box to bean file to set my database contecting.The is how i call function to pass database to the bean file
<%db.setDatabase(database);%>are coding to set my databse connection
private String database;
public Conn(){
try{
Class.forName("org.gjt.mm.mysql.Driver");
DriverManager.registerDriver((Driver) Class.forName("org.gjt.mm.mysql.Driver").newInstance());
String data=getDatabase();
String url = "jdbc:mysql://localhost/"+data;
Connection conn = DriverManager.getConnection(url);
setConnection(conn);
catch(SQLException e){
System.out.println(e.toString());
catch(Exception e){
System.out.println(e.toString());
public void setDatabase(String Database){
this.database = Database;
public String getDatabase(){
return this.database;
} and Below are error produce
Note: sun.tools.javac.Main has been deprecated.
/mrs/system_menu.jsp:18: Method setDatabase(java.lang.String) not found
in class bgoc.dbConn.Conn.
db.setDatabase(database);
^
1 error, 1 warning
please help me soon. any that come to your will help
thank youI have huge promblem .I want to pass value of combo box to bean file to set my database contecting.The is how i call function to pass database to the bean file
<%db.setDatabase(database);%>are coding to set my databse connection
private String database;
public Conn(){
try{
Class.forName("org.gjt.mm.mysql.Driver");
DriverManager.registerDriver((Driver) Class.forName("org.gjt.mm.mysql.Driver").newInstance());
String data=getDatabase();
String url = "jdbc:mysql://localhost/"+data;
Connection conn = DriverManager.getConnection(url);
setConnection(conn);
catch(SQLException e){
System.out.println(e.toString());
catch(Exception e){
System.out.println(e.toString());
public void setDatabase(String Database){
this.database = Database;
public String getDatabase(){
return this.database;
} and Below are error produce
Note: sun.tools.javac.Main has been deprecated.
/mrs/system_menu.jsp:18: Method setDatabase(java.lang.String) not found
in class bgoc.dbConn.Conn.
db.setDatabase(database);
^
1 error, 1 warning
please help me soon. any that come to your will help
thank you -
Submit page and pass value at the same time
Hi All,
I have a tabular form on EMP table. The SQL query for the form is:
SELECT empno, ename, sal
FROM emp
WHERE deptno = :P0_DEPTNO
On the form, I have three buttons labelled as dept10, dept20 and dept30. I want to achieve the following when I press a button:
1. Submit the page.
2. Value of :P0_DEPTNO is set according to the button pressed.
I am able to achieve only one of the above at a time. How can I achieve both at the same time.
I am using Oracle 10g with Apex 4.0.
Thanks,
ZahidActually, it would be cleaner to create a single post submit PL/SQL process as follows:
BEGIN
:P0_DEPTNO := CASE :REQUEST
WHEN 'dept10' THEN value_for_dept10 button
WHEN 'dept20' THEN value_for_dept20 button
WHEN 'dept30' THEN value_for_dept30 button
END CASE;
END;Or if you want to set P0_DEPTNO to the name of the button, then just
:P0_DEPTNO := :REQUEST; -
Submit a page , close a page and pass values to other page
Hi All,
I have page , which has a text box P2_TEST
I will click on a link on page 2, then a pop up page( page number 3) will appear . Its done using javascript.
The popup page, has a OK button.
Whenever I click on OK button,
1)page 3 has to be closed.
2)P2_TEST has to be populated with P3_TEST Value. ( P3_TEST is a text field in page 3)
3)Cursor Should come back to P2_NAME
which is some other field in Page 2.
How do do this?
Thanks in advance.
ArchanaThanks Tim.
I could solve the problem using javascript.
I have used the following javascript.
<script>
function test(){
var radioLength = document.wwv_flow.p_v01.length;
var retVal = '';
if(radioLength == undefined)
if(document.wwv_flow.p_v01.checked)
retVal = document.wwv_flow.p_v01.value;
else
return "";
for(var i = 0; i < radioLength; i++) {
if(document.wwv_flow.p_v01.checked) {
retVal = retVal + ';' +document.wwv_flow.p_v01[i].value;
retVal = retVal.substring(1, retVal.length);
opener.document.getElementById('P1_TEST').value = retVal;
window.close();
</script>
Now the problem is solved!!
Thanks,
Archana -
Safari won't open certain web pages and download/stream speed slow
I have recently been experiencing problems with viewing certain websites, content on websites, streaming video, and downloading files. Sometimes the website will load but all the images will be blue question marks. I cannot get anything to load on youtube. Streaming video on Netflix is really slow as well. My bandwidth allowance on my network is 3 mbps (I'm the only user) and I have been getting between 40-300 kbps when downloading things. I have restarted Safari, my computer, and still no change. Any idea on what's going on? Thanks!
Machine:
Snow Leopard 10.6.8
2.16 GHz Intel Core 2 Duo
2 GB 667 MHz DDR2 SDRAMWelcome to Apple Support Communities.
You're not alone. Others, especially with early MacBooks, have reported slower Safari performance after updating to OS X 10.6.8. and Safari 5.1
Using any popular search engine with the terms "mac os x 10.6.8 slow internet" will reveal dozens of similar complaints.
I did too with my mid-2007 MacBook, similar to yours, except I have 4GB RAM (3 GB usable). After a few days of 'spinning beachball' I restored my system to OS X 10.6.7 and internet performance returned to what I remembered.
One of the longer threads with a number of suggestions is here:
https://discussions.apple.com/thread/3142362?start=0&tstart=0 -
Passing Value from PDK Java to Webdynpro Java in SAP EP SP18
Dear Experts
Please tell me how to call a webdynpro java ivew form a PDK java application and I need to pass a value to webdynpro form my PDK application.
I am using SP18
Please help me in this issue
Regards
NoelNoel,
From your PDK aplication you will be providing the WD URL along with the parameter.
Say in your PDK application you redirect to http://portalserver:50000/irj/local/webdynpro/sap.com/test?mypram=1
In WD you fetch this parameter using WDProtocolAdapter class.
Check below links for more information.
[Access WebDynpro URL parameters programaticaly |https://wiki.sdn.sap.com/wiki/display/WDJava/Access%20WebDynpro%20URL%20parameters%20programaticly]
Page 23 of this [document|https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/ba641aa6-0c01-0010-57ac-c21a4ca7b542&overridelayout=true]
Chintan -
Open in same window and clean cache from swf + html file generate with InDesign CS5
Hi,
1)
I have a Indesign web file exported to swf + html.
In my document I have a button that point to url (this url is html file of a second Indesign swf + html).
When I click on button, the url was find an open in another window.
Is it possible to open this second url in the same window?
If yes How.
I think this information is in the swf file and not in html.(How modify the swf code?)
2)
How to clean the cache when you reload the url? (in the html generate file)
I'will very please if somebody of you could help me. it's Important for me.
Regards
PhilippeOkay, I found the code but I can't get it to work locally. If you have a web server maybe you can upload the files (swf and html) after you Publish them:
import flash.net.URLRequest;
import flash.events.MouseEvent;
var myURL:URLRequest = new URLRequest ("http://www.google.com");
testlink.addEventListener(MouseEvent.CLICK, clickText);
function clickText(myevent:MouseEvent):void {
navigateToURL(myURL, "_self");
you have to have on the stage a link element called "testlink" (see the code above) which would be a Movie Clip with the label testlink. It can be anything from InDesign: a button, a rectangle, a circle, a graphic, you get the idea. Just select that object in Flash and label it testlink or anything you choose but if you change the name from testlink also change the name in the code snippet where the line "addEventListener" is. -
There is no more existing file for itunes on my ibook and every time i try and download itunes it says cannot create file. Can anyone tell me what to do please?
Open the General section of Safari's preferences and check where Safari is trying to download files to; if this folder doesn't exist or is in a folder used by the system itself, change it to a location inside your home folder, such as the desktop, or another folder you can write to, such as /Users/Shared/. If the download folder is set to one of these locations and you get that error message, click on that folder in the Finder and then choose Get Info from the File menu. Under Ownership & Permissions, verify that you have read and write access to this folder and that the folder isn't locked, changing the settings as necessary.
(58344) -
Passing values from one .mxml file to other
Hi all,
I am a flex newbie, and I have to admit I like flex very much. I have the following question:
I am trying to make a really simple example, where I have a simple mxml application containing some radiobuttons. the radiobuttons simply change the color of several graphic shapes (circles,etc) on click. I am trying to add a new state (represented as a new mxml module) that contains different shapes. Still, I want to pass the value of the originally created radiobuttons to my new state (aka interface view) so that the new shapes inherit their color according to the radiobuttons value (selected:true || false). I am using flex 4 and in order to load my new interface (module) I use the SWFLoader.
Any help would be greatly appreciated. Also, if my (above) description doesn't make sense, I can easily paste my code (it's just a few lines anyway).
Thank you.I'm not the most experienced flex user, but in other programming languages, each class is usually kept separate and can interact with each other using public functions. You might need to create a function in class B called setColorOfObject(object:object, color:color). Then in class B you can use those values to manipulate objects contained within class B. You would need to call the function contained in class B using class A.
~dan -
Firefox will not open any web pages including its own introduction pages.
I downloaded Firefox to try out.
When I first opened Firefox on this computer, it failed to open any web pages and continues to do so.
I have downloaded it on two other laptops with the same configuration with no issues.
Google Chrome is working on this machine.Update..when I open firefox from scratch, the main firefox pages on the home page seem to work. But as soon as I try to go anywhere else, IE going to a website in the address bar or even trying to access the defauly bookmark links, it just sits there loading but never brings anything up.
Maybe you are looking for
-
Error while starting SOA suite
Hi All, i am unable to start SOA suite it is giving a error saying OPMN error how to come out of this Configuration information Running in C:\product\10.1.3.1\OracleAS_2 Operation mode:Startup, App Server, No Enterprise Manager, Single Instance Oracl
-
How to install infra and ias( bi) on same host?
I can install and run infrastructure, but when i install the ias( with bi option) on the same machine( host), the error linking a taget runm_install of ... ins_reports appears. How to resolve? Thanks.
-
The attributes SID table(s) could not be filled
I am trying to change an attribute to a navigational attribute for 0MAT_PLANT and I am receiving this error upon activation. I have tried the following: 1) Deleting Master Data and reactivating 2) Program RSDMD_CHECKPRG_ALL 3) Activating in the b
-
I am getting a message in the middle of my imac screen instructing me to hold down the on-off button and turn off the computer. The message is in several languages and completely takes over the computer disabling the mouse and all other functions. Th
-
My iPad mini makes chargers burn to the touch.
I have an iPad mini and my charger overheated and died. I have borrowed other people's chargers in the mean time but they get very very hot to the touch when I plug it into my iPad. What shall I do?