Open orders display in BEX report based on Key date

Hello All,
I have a requirement:
We have an existing report which needs to have input selection as Key Date.
The report should display the Open orders based on the key date mentioned.
For Eg: if an item A was Opened on 20th Sept, 2010 and now CLEARED and if I run the ECC report today and mention the key date as 20th Sept, 2010, then the report will show me the item A status as OPEN
Plz help me with the logic for the same at the earliest
Tthanks..
Sneha

Hi Sneha,
I assume you have open and crear dates in your query. So put an open date in your query filter and restrict it as less then Key date variable(which is a variable of type user-input on 0calday), then create another variable that feeds from keydate variable (it can be a replacement path or simplest user-exit).
Note: the another variable is needed because as far as i can remember you cant use the same variable to restrict two different chars in the same query/anyway test if it's not possible - then create another variable as i mentioned.
Take Cleardate in your query filter and restrict it as more than keydate variable andr # (not assigned). (in case if it hasnt been creared at all yet at the key date time)
Pls let me know if this was helpfull

Similar Messages

Need Report based on "CUSTOM DATA field @ Shop Order Maintenance"

Need the REPORT based on CUSTOM DATA field.
Requirement - I am having the CUSTOM data at Shop Order Maintenance that is called as XXX, I need some report in SAP ME which can display the SFC related to particular Shop order based on XXX Number.

Hi!
As far as I remember there is no such base report. So, you may try to create it using SDK or request it as custom enhancement from SAP.
If you want to create it using SDK, you can find the required data for report in CUSTOM_FIELDS table.
Regards,
Alex.

R12: How to filter Open Item Revaluation Report based on GL Date

Hi,
Anybody know how to filter Open Item Revaluation Report based on GL Date from and GL Date to in R12?
Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
We need to run the report only for specific date only. Please share with me if anyone know about this.
Thanks.

Pl do not post duplicates - R12: How to filter Open Item Revaluation Report based on GL Date

Is it possible to Display BW Bex report iviews in Tabbed Interface?

Hi,
Is their a way to display BW BEx Report Iviews in Tabbed Interface?
My requirement is to show four BEx Reports using 4 tabs on a page. Can we achieve this functionality in portal? If yes can some one guide me how to proceed?
Regards
Sai Krishna Reddy

why not have a webtemplate with tabbed interace and use that webtemplate to create BWP iview?
check out the following how to document on this subjec.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5074a890-0201-0010-a489-dd05902a28c8">How to Create Buttons and TabStrips in BI Web Applications</a>
Regards
Raja

Authorizations for WEBI report based on BPC data model

Hi All,
We are strugelling with setting up authorisations for the reporting on BPC data model.
We created Bex query on top of Multiprovider that consists of BPC cube. The Bex query is source for WEBI output. The authorisations has been set up on BPC data model (cube) in BPC application but they are not passed nor to Bex query nor to Webi. Example: The query is build on top of OPEX BPC data model, this data model is restricted based on Oranizational Unit. My test user is allowed to see only Org Unit = 'Australia' in the OPEX BPC data model, however when I'm running the report I can see absolutely everything.
We are not connecting/using any BI cubes itself for this reporting. We are intrested only in the WEBI report based on BPC data models.
We were trying to use BPC data model (without any extra settings) as the source for BEx report, we were also trying to use virtual BPC data model as the source for Bex transient query - but non of these have helped.
Can you please advise how the authorisations should be set up for WEBI reporting on BPC data models?
Kasia

Anybody can help with this issue please?

Creating report based on master data

Hi Guys,
I want to create a specific report based on master data in BI cube. for example... a report which takes cost center and period as variable and display expenses for that period and cost center. This report I want to create for all cost center in BI database separately. any idea how can we do this?
There are 2000 cost centers and I need to print/send 2000 reports one for every cost center.
If I store all cost center in excel file, can it be easier?
broadcasting and creating 2000 schedule - not option.
Thanks..SM

Hi stuti misra,
Create ONE Query with selection Cost Center and Period are inputs.
Create text variables for Cost Center and Period and add in Query Description.
After query execution you can see description based on selection in workbook or webtemplate.
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Create report based on JSON data

Dear All,
I'm on Oracle APEX 4.1 and Oracle 11g. I'm receiving JSON data in my application and would like to print report based on JSON data without storing it in any table.
Can you please suggest best way to achieve it?
Regards,
Chintan

Hi,
in 4.1 you can for example use the open source PL/JSON library (http://sourceforge.net/projects/pljson/) to parse JSON.
In APEX 5.0, we currently plan to add a JSON API package that e.g. can be used to convert JSON to XML. Here is an example:
SQL> select col1, col2
2 from xmltable (
3      '/json/row'
4      passing apex_json.parse('[{"col1": 1, "col2": "hello"},{"col1": 2, "col2": "world"}]')
5      columns
6          col1 number path '/row/col1',
7          col2 varchar2(5) path '/row/col2' );
                COL1 COL2
                   1 hello
                   2 world
At the last OOW, it was also announced that the RDBMS will provide native support. That should be the preferred option in the future.
Regards,
Christian

Urgent BEX Report Showing the Wrong data

Hi Experts,
In my Cube the data is available curreclty, but where as my bex report showing the wrong data.
like xeample:
Infocube
Material               Plant    Year    Units Qty
000000000002001032     003     2006     BAG   1,500
But in bex i took the same selection's, but it displays as
000000000002001032     003     2006     BAG   2
i am Unable to trace this
any help plzzz
Anil

Hi,
since Quantity(units PC??) can not be in decimals,Bex will round off 1.5 to 2 in bex report.
Use NODIM function i.e. NODIM(Qty) instead of Quantity.
NODIM function is available under data functions of Formula builder.
From context menu fo KF structure>new formula>NODIM(Qty).
or
try by setting Decimal places to 2 or 3 in KF properties in Bex Query.
hope this helps.
Message was edited by: Murali

FI-CA Open Items based on key date Business Content

Hi,
I am using BI content infocube 0FC_C07 to extract contract account open items data. Our requirement is to do the data load weekly basis based on key date.
I have enhanced the extractor and i can see data for the enhanced fields in RSA3. But now, i am not sure how to load data into BI.
At the infopackage level(PSA level) there are 2 mandatory fields (DateID(LAUFD) and Additional Identification Characteristic(LAUFI)). Do i need to change the date every week manually? I have to create a process chain to automate the dataloads.
Also, i need to use counters for Each unique Contract Account and Contract Account Document .
For the contract Account Document number , i am thinking to us this formula(If contaract document item =1 then document counter =1 otherwise 0). But i am not sure how to count each single contract Account?
Your advise will be appreciated.
Thanks,
Priya

Hi Priya,
Go to InfoPackage selection tab.
Now in the Type select 6 which is for ABAP Routine.
This will open the ABAP Editor.
Write your code there.
Sample code.
data: l_idx like sy-tabix.
DATA : from_date type sy-datum,
       to_date type sy-datum,
       month(2) type n.
read table l_t_range with key
     fieldname = 'IDATU'.
l_idx = sy-tabix.
*if current date is suppose 14th April 2008, then this routine should
*pick values from 1st jan 2008 till
14th April 2008
clear month.
month = sy-datum+4(2).
if month = '01'.
month = '10'.
endif.
if month = '02'.
month = '11'.
endif.
if month = '03'.
month = '12'.
endif.
if month GT '03'.
month = month - 3.
endif.
concatenate sy-datum+0(4) month '01' into to_date.
l_t_range-low = to_date.
l_t_range-high = sy-datum.
l_t_range-sign = 'I'.
l_t_range-option = 'BT'.
modify l_t_range index l_idx.
p_subrc = 0.

R12: How to filter AP and PO Accrual Reconciliation Report based on GL Date

Hi,
Anybody know how to filter AP and PO Accrual Reconciliation Report based on GL Date from and GL Date to in R12?
Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
We need to run the report only for specific date only. Please share with me if anyone know about this.
Thanks.

In 12 you can rebuild and run the report for a particular period, but not a single day if that's what's required

Inventory Report Based On Posting Date

Hai All
Can any one help me with the subject "Inventory Report Based On Posting Date"
Please
with regards
Shankar

hi,
Visit this link,already answered.
Difference between posting & system date in Inventory Audit Report
Jeyakanthan

Filtering an EVDRE report based on a Data Value

Everyone,
I have a report that has accounts in the columns without expansion. I am capturing various status codes in one account and I need to know how to filter the report based on a data value that is retrieved from the database for this account.I am also using the EVdre sort functionality along with an EVSUB in the after range which sub totals the Organization and Materials Dimensions in the rows. When I try to use native Excel to filter based on the value of the Status Code Account the report will only sort the top section of the report. As soon as it hits the Subtotals it stops filtering. Is there a way to filter the report in EVDRE based on the data value that is returned from the database.
The account that I want to filter on is Status Code. We can have two values in it either 10 = Submitted or 30 = Business Case. The users want to be able to filter the report to only show the status code of 10 (Submitted) for their Executives to review.
Edited by: eleasha counts on Aug 3, 2011 12:22 PM

Hi eleasha,
I don't know if you will entertain FORMATRANGE.
But you can use formatrange to hide those rows you donot want to see.
You can use the CRITERIA as VALUE=<<anyvalue>> you want to verify and apply it on rows.
You can set the PARAMETER value as ROWHEIGHT=0, and apply to ALL.
Try this with the combinations you need to see.
Hope this helps.
Karthik AJ

Open order quantity in ME5A report

Dear All,
How to get the open ordered quantity in the transaction ME5A.
Regards,
Venkat.

dear
u have diff selection criteria (ticks)
in that screeen use that for the report
regards,
snb

KF value is not Displayed in BEx Report ..where as cube, mpro end ok..!!

Hello Experts,
I ran a bex report. In that report KF some NetsSalesValue has not displayed in the BI Report for all the Sales Organiations where as other KFs has displayed the value for all the Sales Organizations.
For that i checked my end. BI report is pulling data from Cube --> Multiprovider --> Bex Report.
I myself checked KF value into Cube level, multiprovider KF level value is avaialable.
And also i checked, in the query properties is there any filters, RKF, CKF, but...i found the KF is a basic KF.
And also..i checked the whether the rollup has happened..properly or not and ran the query but no use.
For your info upto 3 days..back KF value has presented in the report. After that only this issue has encounterred.
I am in confusion where the exact issue will be.
If any body faced this kind of scenario is your project, kindly reply me.
For any more clarifications i will respond you immediately.
Thanks,
SN

Hi,
check aggregates,index etc for cube
check key figure selection as well in Multiprovider for respective Infoprovider
just create test query on Infoprovider and then on Multiprovider and see..
Check RSRT - regenerate the query
also see there are various options like execute+debug has ....just check them
Thanks and regards
Kiran

MAKE BUTTON CONDITIONAL DISPLAY IN A REPORT BASED ON STATUS OF COL VALUE

hello,
can anyone help me out with this issue.
Like I have a normal SQL report with buttons update,delete,insert and I wanted to display these buttons conditionally based on the value of the "status" column.
For Example: if the status columnvalue is 'DEV' then only display the buttons otherwise don't display them.
thanks,
Orton

I would use a CASE statement in the select....
each CASE would be an img src tag for a different button if the button is an image.
does that make sense? I can include an example if you would like...

Open orders display in BEX report based on Key date

Similar Messages

Maybe you are looking for