Open quantity (how system gives pop-up?).
Hi,
Suppose if there are open orders for a customer, While doing the sales order for that customer the system gives the <b>pop-up</b> that thae customer has some open orders.
Where we contol this in the system ( How the system gives the pop-ups? where we configure? )
regards,
v.s.vas.
Message was edited by:
v.s.vas.
hi,
I think u have activateed the credit check. If yes please check this
Goto tcode: OVA8--->select the automatic credit check which u have activated ->here u will find open items with <b>reaction</b> column--> which has message
The reaction column has
No message
A Warning
B Error message
C Like A + value by which the credit limit has been exceeded
D Like B + value by which the credit limit has been exceeded
hope this helps u
regards,
Arun prasad
Similar Messages
-
SAP sales return system should not accept quantity more than open quantity
Dear All
During sales return user is able to enter the quantity more than open quantity and system is allowing for that enter
Plz tell me how to restrict this
Regards
ArunNo need of exit for this.
Go to VTAF, select the item category for the combination of order type and billing type and maintain "+" for the field "Pos./neg. quantity"
Also go to OVAH and change message class V4 no 229 to E will work.
Now try to create a return order and increase the quantity. Sytem will not allow to do so but if you create a new line item, then system will also for which, you can go for exit already suggested.
thanks
G. Lakshmipathi -
Every time I click on a web page an advertisement or MAC Keeper page opens up. I have pop-up blocker on. How do I make this stop?
There is no need to download anything to solve this problem.
You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
whenever i click on word or powerpoint it always brings up a recent document. I want to have the option like when i had first opened the app that gives the options of new document and the variety of different documents. how do i get it back to that?
tbreezy wrote:
THANK U!! K ONE MORE QUICK QUESTION. HOW DO I GET RID OF THAT POP UP BOX?
Not sure, try googling "the global template normal.dotm is already open as an add-in program" -
How to configure for open quantity
please help
how the oder quntity will be come as deliver quanity and delivery quntity ll be come as open quantity
for this reason my delivery is splited in to 2delivery each time and
the schedules are coming auto matically
see the notes regarding open quntity in delivery
Quantity to be delivered in sales units
The quantity of the item that remains open for delivery. The open quantity includes the delivery quantity in the delivery that you are currently processing. The quantity is expressed in sales units.
Use
The system calculates the open quantity by taking the original delivery quantity and subtracting the quantities from any deliveries that also refer to the item. If you create more than one delivery for an item, the system adjusts the open quantity in existing deliveries every time a new delivery takes place.
Example
You create a sales order item for 100 pieces. During delivery processing, you create three separate deliveries that refer to this order item.
1. Delivery #1 has a delivery quantity of 40. The open quantity is 100 pieces (the quantity still to be delivered, including the 40 pieces you already entered for this delivery item).
2. Delivery #2 has a delivery quantity of 50. The open quantity is 60 (the original delivery quantity of 100, minus 40 from the first delivery, but including the 50 you are currently processing). In the first delivery, the system adjusts the open quantity from 100 to 50, to account for the delivery quantity in the second delivery.
3. Delivery #3 has a delivery quantity of 10, to complete the original delivery quantity of 100. In the third delivery, the open quantity stands at 10 and the system adjusts the open quantities in the first and second deliveries to 40 and 50 respectively.
so all the problem due to this open quantity
so please tell me how the open qunatity will be same as the delivery quanity
or ordered quntity
regards
subratHi Surbat,
First we would like to know why you want the open quantity same as delivery quantity or Sales order quantity?
Regards,
Amrish Purohit -
How to calculate the OPEN QUANTITY in delivery Duelist Report
Hi Everybody,
I have a query for finding out the OPEN QUANTITY for schedulines for a delivery.
If for example the report is run for 2nd of February, it is necessary to
determine whether there are delivery relevant schedule lines before the
2nd.
If yes, we need to know whether there is an open quantity to this line
item.
If yes, this open quantity is a negative deviation (we delivered not
enough).
If there is no open quantity it is necessary to determine whether for the
earliest future to be deleviered schedule line, the open quantity equals
the ordered quantity (VBEP-WMENG),
if No the the difference between both values equals the positive deviation
(we delivered more than requested)
If the open quantity equals the ordered quantity there is no deviation.
The problem is to calculate the open quantity and the SAP standard there is function
builder used in SAP standard include MV45AF0O_OFFENE_WERTE_ERMITTEL, the
function builder is called RV_SCHEDULE_CHECK_DELIVERIES'. But how could we use in this formulae in a Custom delivery report.
Looking for your helpful suggestions.
Many thanks in Advance,
Mira SaikrishnaKrishna....have a look in the below threads where there was a similar requirement..
error while using BAPI_OUTB_DELIVERY_CHANGE
change outbound delivery -
I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?
Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
How to find open orders and open quantity
Hi abap gurus,
i want to find the open orders with the quantity means those orders for which we don't have goods issues(and partial deliverys is also possible). i get this scenario but i don't know how to start.
i think i should go to VBUP table and get all the orders
which have overall status GBSTA = 'A' OR 'B'.
So from this i will get all the open orders but i need to find open quantity also .
please tell me how can i find out and which table do i need to use.You need to check between delivery line item table as well sales order line item table.
Sales order Line item table : VBAP
Delivery line item table : LIPS
if order qty and delivery qty are same then there is no open qty if not then there is open qty.
Thanks
Seshu -
How to change the open quantity of PO / STO using BAPI_PO_CHANGE
Hi Friends,
How can I change the open quantity in ME22 using the BAPI BAPI_PO_CHANGE...
I am getting some errors..The values I am passing to the BAPI are:-
*-- Purchase Order document
lv_purchaseorder = tbl_join-ebeln.
*-- Calculate Open quantity
lv_quantity = ( tbl_join-menge - tbl_join-wemng ).
*-- Fills Schedule quantity to be processed.
tbl_poschedule-po_item = tbl_join-ebelp.
tbl_poschedule-sched_line = tbl_join-etenr.
tbl_poschedule-quantity = lv_quantity.
APPEND tbl_poschedule.
*-- Marks the Schedule quantity to be processed.
tbl_poschedulex-po_item = tbl_join-ebelp.
tbl_poschedulex-sched_line = tbl_join-etenr.
tbl_poschedulex-po_itemx = c_true.
tbl_poschedulex-sched_linex = c_true.
tbl_poschedulex-quantity = c_true.
APPEND tbl_poschedulex.
CALL FUNCTION 'BAPI_PO_CHANGE'
EXPORTING
PURCHASEORDER = lv_purchaseorder
POHEADER =
POHEADERX =
POADDRVENDOR =
TESTRUN = 'X'
IMPORTING
EXPHEADER =
EXPPOEXPIMPHEADER =
TABLES
RETURN = tbl_return
POSCHEDULE = tbl_poschedule
POSCHEDULEX = tbl_poschedulex.
Is there any other required fields needs to be passed to change the open quantity..
I am checking in ME22...
The scheduled quantity is 20.
Delivered quantity is 15.
Open quantity is 5 and ( this field is in non-editable display )
Delivery date is 10.10.2002 ( which is in past )
Now using this BAPI ..I want to post the remaining open quantity which is " 5 "
How can i do this ?? Please help.Hi Hari
Please check after making the following changes:
*-- Marks the Schedule quantity to be processed.
tbl_poschedulex-po_item = tbl_join-ebelp.
tbl_poschedulex-sched_line = tbl_join-etenr.
<b>tbl_poschedulex-po_itemx = 'U'. "c_true.
*tbl_poschedulex-sched_linex = c_true.</b>
tbl_poschedulex-quantity = c_true.
APPEND tbl_poschedulex.
If still you do not get the desired function working add the below code:
tbl_poitem-po_item = tbl_join-ebelp.
tbl_poitem-quantity = lv_quantity.
append tbl_poitem.
tbl_poitemx-po_item = tbl_join-ebelp.
tbl_poitemx-po_itemx = 'U'.
tbl_poitemx-quantity = c_true.
append tbl_poitemx.
Hope this helps.
Kind Regards
Eswar -
How to give connection between sap R/3 to sap BI 7.0 system
how to give connection between sap R/3 to sap BI 7.0 system
Hello,
Check this links:
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
You can look at:
OSS Note 184971 'Notes on BW source system connections' and http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/content.htm
You can use this best practice connectivity guide for connecting BW to any SAP source system . It explains step by step procedure to connect the source systems to BW.
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
http://help.sap.com/bestpractices/crossindustry/businessintelligence/v131/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
check this:
http://wiki.ittoolbox.com//index.php/HOWTO%3ARe%2DConnect%5FR/3%5Fand%5FBW#Type_Transaction_SM59._Maintain_RFC_destinations
Regards,
Jorge Diogo -
Hi,
I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?Click here and follow the instructions.
(99025) -
How to bring Pop up while opening any transaction
Hi All,
I need to give Pop up when any one open some transaction.
Please advice.
Thanks,
Gaurav MittalHi ,
Try the Function Module -- POPUP_TO_CONFIRM_STEP before CALL TRANSACTION.
Check the bellow code -
DATA : w_return TYPE c.
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
textline1 = 'Do you want to continue ?'
titel = 'Confirmation'
cancel_display = 'X'
IMPORTING
answer = w_return.
IF w_return EQ 'J'. " When YES is clicked
CALL TRANSACTION 'SE11'.
ENDIF.
Note : In the W_RETURN variable will hold the return value like -
when the YES will be selected the value will be J and
when the NO will be selected the value will be N .
You can also use FM POPUP_TO_CONFIRM .
Regards
Pinaki -
How to give manual font path location when document opening?
Hi,
I want to know how to give manual path location for fonts when document opening like LinoType FontExplorerX, Font Book, UTS. Please Help me its very urgent
ThanksHi, I am doing the code likthis,please give the solution.
SQL> create or replace procedure insProc(xmlDoc IN CLOB, tableName IN VARCHAR2) is
2 insCtx DBMS_XMLSave.ctxType;
3 l_ctx dbms_xmlsave.ctxtype;
4 rows number;
5 begin
6 insCtx := DBMS_XMLSave.newContext(tableName); -- get the context handle
7 rows := DBMS_XMLSave.insertXML(insCtx,xmlDoc); -- this inserts the document
8 DBMS_XMLSave.closeContext(insCtx); -- this closes the handle
9 end;
10 /
Procedure created.
SQL> begin
2 insProc('/usr/tmp/ROWSET.xml', 'emp');
3 end;
4 /
begin
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception: oracle.xml.sql.OracleXMLSQLException:
Start of root element expected.
ORA-06512: at "SYS.DBMS_XMLSAVE", line 65
ORA-06512: at "SCOTT.INSPROC", line 7
ORA-06512: at line 2
Kishore B -
I accidently closed the window with all my frequently used app tabs, now the only window that opens was an extra one I had opened. How do I get back all my app tabs from the previous window, and why didn't it give me the usual warning you are closing more than one tab? edit
DetailsThen the (App) tabs from that window are lost unless you can restore an older copy of the sessionstore.js file (Time Machine?) that has that lost window.
*http://kb.mozillazine.org/sessionstore.js -
TypeError: this.oRoot.enable is not a function
This is popping up when I befor I open my browser,in a pop up box under the heading JAVA SCRIPT EXE. What is it, how do I get rid of it?I did it in my computer, but I can not uninstall the Site Advisor alone. I need to uninstsll the the total McAfee plus. What should I do?
But another user in my computer they do not have this problem. If I try to use IE or Chrome etc , I can not find this problem. I use firefox since 2006 and do not want to change another one. What should I do?
By the way I have this problem after I update Firefox6 3 weeks ago and always allow 1 plugin work. The other user in this computer they just allow firefox plugin working 1 times.
It will pop out if I disable the siteadivsor.
many thanks
Maybe you are looking for
-
Mountain Lion (10.8) and Safari bugs
Hello, I want to chime in and list the bugs in Safari since my install of Mac OS 10.8.0 Java does not function as it should. It's buggy and generates errors, stops on errors and wont load data from some websites correctly. My main concern centres aro
-
Query taking too much time with dates??
hello folks, I am trying pull some data using the date condition and for somereason its taking too much time to return the data and trunc(al.activity_date) = TRUNC (SYSDATE, 'DD') - 1 --If i use this its takes too much time and al.activity_d
-
Problem When Multiple Users Export To PDF Simultaneously
I am hoping someone out there can help. We have had no luck at all with Crystal Reports / SAP support for this issue. We have a client/server aplication and have written a C# program to load a crystal report on the server, export it to PDF and then
-
I recently purchased a new MacBook Pro and used a Time Machine backup to transfer all the files from my old MacBook Pro to the new one. Now, I am trying to set up Time Machine on the new laptop with the same external hard drive I was using a Time Mac
-
X1000 stops giving out Wireless DHCP IP addresses
I have 2 X1000 switches, the prmary switch, IP, 192.168.1.1 connects to my ADSL line upstairs and handles all DHCP.. My second router is downstairs and has been configured as 192.168.1.2, there is a LAN cable running from a LAN port of the primary ro