Open Schedules within the firm zone period

Hi All
We have one schedule aggrement for one part in our system and we have different firm zone period for each suppliers...
I would like to ask you ; how can we get the list of the fixed schedules (I mean existing schedules within the firm zone period) based on the Vendor..?
Thank you

firm zones can be defined in scheduling agreement..which will reflect in the release

Similar Messages

Delivery Schedule within the Firm Zone of a SA not firming

Hello,
We have delivery schedules within firm zone (defined in the Additional Data in item detail) of a SA but they are not firmed by MRP run.
Here is the material master setting and other relevant information:
MRP Type = PD (firming type = blank)
Planning Time Fence = 0 (in MRP1 view)
Not check the flag in OMIN to firm only the transmitted schedule line
Maintained Firm/Trade-off zone (as mentioned above) and Binding on MRP = '1' in an item of a SA
The delivery schedule supposedly be firmed based on the firm zone but is keep pushed out instead after MRP run.
I appreciate very much if you can tell what's causing the problem and how to remedy it.
Kind Regards,
Eddie

Eddie,
Your batch job is OK however until the delivery schedule with new schedule line proposals has been transmitted they can be changed by MRP as they are not yet firm.
From my experience the OMIN settings affect the MRP type firming settings (P1, P2, ...) not the SA related firm settings. Here the binding on MRP key is determining what MRP can change or can not change.
See here the extract out of the help function on the OMIN setting.
Firm Only Schedule Lines Transmitted to Vendor by Purchasing
If you set this indicator, the system only firms the schedule lines which have been transmitted to the vendor by the purchasing department.
Use
This function is used if you use a planning time fence in the planning run. If you use firming type 1 ("Automatic firming and order proposals are displaced"), the system automatically firms existing schedule lines when they move into the planning time fence.
Use this indicator if you only want the system to firm schedule lines that have already been checked and passed on to the vendor per message transfer. If, for example, the quantity of a schedule line was changed but the changed quantity has not yet been passed on to the vendor, then the old quantity that has already been passed on to the vendor is firmed as soon as this schedule line moves into the planning time fence.

Released schedule line in firm zone changed in the background

Hi
I need to understand why and how a Released schedule line in firm zone can be changed in the background?

If the qty is not transmitted to the vendor using message transmission, system does not firm the qty with in planning time fence.
So pls chk your planning time fence as well.
Also pls chk the below link
http://help.sap.com/saphelp_46c/helpdata/en/f4/7d2a5b44af11d182b40000e829fbfe/content.htm
BR,
Krishna

How Can I open Report within the same window instead of separate Window

Hi All,
I want to open report in my MDI form instead of opening it into a separate Oracle Report Navigator(i.e. Window which shows the report). How to do that? When I click the Report from Menu it should open it within the MDI Form. Any suggestion or reply would be greatly appreciated.
One more question is how can i open report with in a maximized state. Actaully, the report will be opened in the normal state. How to open in maximized state instead of normal state. Is there any property in reports to acheive this?
Thanks in Advance.
Regards
Gopinath Kona

hello,
reports is a separate application that is called from forms and therefore is running outside the context of the forms MDI window.
you can use the commandline parameter MAXIMIZE=YES to start the runtime in full-screen-mode.
regards,
the oracle reports team --pw

How to get highest number of open cursors within the current calendar day

Hi all ,
i need to know how to get the highest number of open cursors within the current calendar day.
Thanks ,

823030 wrote:
the issue is my customer is getting the error ORA-01000: maximum open cursors exceeded and we need an sql statment that gets the following values :
-highest number of open cursors experienced in the current calendar day.
-current open cursors
-and maximum open cursorsThis error is rare. It happens when
a) the value of the open cursor parameter is set extremly low (default is something like 1000). Low would be something like 10.
b) <strike>you have many concurrent users(=sessions) and </strike>the application does not use bind values
In this case each select will open a new cursor, instead of reusing it.
c) you have a select that opens a cursor for each line. This can happen with a statement where you have the CURSOR keyword somewhere in the select or where clause. Those cursors will be closed when the select is finished. But during the run time of the select, all cursors stay open.
To track the number of "open cursors" during the day you would need to implement some monitoring. Maybe based on the view that was already mentioned.
Edited by: Sven W. on May 16, 2011 2:30 PM - since the parameter is on session level, other open cursors should not influence it much.

Does anyone know how many times a newly purchased product (MB Air 2014) can be exchanged within the 14 day period?

Does anyone know how many times a newly purchased product (MB Air 2014) can be exchanged within the 14 day period? I feel like the MB Pro would be a better fit for me, so I wanted to exchange my Air for the Pro. But also, if I end up not liking the Pro and want to go back to an Air, would I be permitted to do so with another exchange? (all still within the 14 day window after purchase of course).
Also, are there any specifics I need to know in order to return my product and get a new one? Obvioulsy, I would be sure to remove all of my personal files, music, etc...but is there anything else I need to do?
And lastly, and im sure this question is irritating to you Mac wiz kids out there, but are the two models im comparing really all that different? I just cant make up my mind and would love some pointers/suggestions/tips/info to help me figure out what model is best for me (the apple employee that was helping me in the store was actually not that helpful at all, if they were I wouldnt have to ask this question on a discussion board). I do tons of multimedia things and download and enjoy music, tv shows, movies, all that stuff..and I used to love to burn dvds and cds (obviously cant do that with the MB Air now which totally bummed me out ). Which model does anyone think I should stick with? Id greatly appreciate some opinions! Really tho, help me out ppls! I'd love some helpful advice! I sometimes have problems making big/important/expensive decisions lol I just really want to make sure i am getting the best model for all of my daily tasks and all of the things i actually do regularly on my computer.
Oh, last lastly- I cant afford anything more than a 13" STANDARD MacBook Pro at the moment...soooo the Retina display is unfortunately not an option for me.
Which is also a big bummer.but i think i can get over it...or beg someone to loan me an extra $200 lol
Someone....Annnnyyyone....Pleeeeease....Heeelllllllp....
Thanks

Just play with each and figure out which one you want. I believe they only allow 1 exchange unless it is a defect issue. You can always return the exchanged item and rebuy what you want if they will not allow you to do multiple exchanges.
But again, you need to really figure out which one you want.

Downgrade back to the free 5 gigs within the 15 day period of orinal purchase ... how do you get your money back ...

downgrade back to the free 5 gigs within the 15 day period of orinal purchase ... how do you get your money back ...

iCloud- Storage upgrades and downgrades
We can do without the all caps yelling. These are user forums, and you are not speaking to Apple.

Process 000004 did not confirm within the permitted time period

Hi
The process chain failed while activating the ODS with an error message :Process 000004 did not confirm within the permitted time period" . When repeated the failed step it went successufull. but want to know what can be the cause and steps to be taken in order to avoide this issue further.
Thanks
Ratan

Hi,
Whenever ODS activation goes there'll be some batch processes you can say as parallel processes running along with main job. Due to unavailability of resources i.e either bkgd or dialog processes soemtimes gets delayed and they gets canceled which leads to the failure of main ODS activation job...
may be in ur scenario the same thing might have happened, so when you had repeated the step if the resources are free it will be successful.
once chk in your system for canceled jobs, ther might be some job which relates to your process.
rgds,

How can I attach a pdf file to outgoing mail without it opening up within the message?

How can I attach a pdf file to outgoing mail without in opening up within the message?

You can use the Share button on Preview's toolbar. Choosing Email pops open Mail with the PDF already iconified as an attachment. If it doesn't behave this nicely for you, select the PDF in Mail and choose the right contextual menu, where you will find View as Icon. I also have Send Windows-Friendly attachments enabled.

Error Message : Object could not be scheduled within the specified time interval

Post Author: mohamed elkashef
CA Forum: Publishing
Dear All when i try to run event for daily reports it sometimes take generation status failed with this error message : Object could not be scheduled within the specified time interval so i need to know the reason of failure and how can i fix this error thanks a lot

Post Author: nvnaresh
CA Forum: Publishing
Dear jsanzone,
I'm facing the same error even when the server time out is more than the query execution time of the report.By server time out I assume connection time out of WebI report server which I have set to 180 min.But the actual query takes maximum of 5 min.
We are using BO XIR2+SP2.
I scheduled a webI report to get saved in Excel format to an Unmanaged disk location upon a File Event.
We have 3 such reports to be scheduled on the same event.
Expected frequency of File Event getting fired in a day is twice.Scheduling frequency I have set it as every one hour with the file event.
This usually should work fine.
But frequently 1 or 2 of the above 3 instances are getting failed with the following error "Object could not be scheduled with in specified time interval " after being in Running state for few hours(8). Amazingly this is not happening every time. May be once or twice in a week.This works fine after I restart the BO services and the same thing repeats after 3 or 4 days.
Do I need to increase any server parameters?
Why is this happening randomly?

I have an iMac with OS x 10.8. Every folder t hat opens has (in the gray zone on top) file icons and jpg photos listed. How do I remove them?

I have an iMac with OS x 10.8. Every folder t hat opens has (in the gray zone on top) file icons and jpg photos listed. How do I remove them?

Control-click each and choose Remove Item, or Command-click them and drag them out.
(85250)

This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase the timeout value on the Proxy and Timeout page in search administration. You might also wa

HI,
I got the error message in the crawl log as below after performing the Full Crawl
This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase
the timeout value on the Proxy and Timeout page in search administration. You might also want to crawl this repository during off-peak usage times.
To overcome the above error,many forums have suggested me to increase the time out which is under Farm level settings.But if time out gets increased,performance impacts as well.
So please suggest me to overcome this error without increasing the timeout.Thanks in advance
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I understand that you get the error message when performing a full crawl. I have seen similar cases caused by IE proxy settings. You can try to edit the Internet Options>Connections>LAN settings. Uncheck ‘Automatically detect settings’.
For more information, please refer to this site:
Search error: crawler could not connect to the repository:
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/c230ab36-8d0b-4c25-bf86-33136d17642b/
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

I purchased an iPhone 5S using my EDGE upgrade on September 5, but would like to exchange it for an iPhone 6 within the 14 day period. Other than having to pay the $35 restocking fee, will I have any problems doing so? Thanks

I purchased an iPhone 5S using my EDGE upgrade on September 5, but would like to exchange it for an iPhone 6 within the 14 day period. Other than having to pay the $35 restocking fee, will I have any problems doing so? Thanks

Good evening udflyers! You should not have any problem returning/exchanging your current within 14 days http://bit.ly/IeiJI of purchase. However, you may have to preorder the device you want as it is not currently available and preorder start on 9/12/14 at 12:01am, PST. Please process your return/exchange thru the same channel as your original purchase.
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

ERROR : Object could not be scheduled within the specified time interval

I have the next error Object could not be scheduled within the specified time interval.
When i schedule a report to be refreshed and the moment come when the report have to be refresh appear the error.
i check the error in the following path in the CMC
HOME> FOLDERS > USER FOLDERS > ... > "REPORT FOLDER" Instance Properties
Why i get this error?
Anyone can give me a good solution to solve this error?
Thanks!!!

Hi Ed,
The above error message is appearing due to the reason, when a large number of requests are scheduled to start at the same time, this may exceed the Maximum Number of Simultanius Requests that the deployment can support.
To resolve this error message, increase the end time on the scheduled instance. To increase the end time, use the following steps:
1. In the Infoview, browse to the desired report and click 'History'.
2. Find the desired scheduled instance and click 'Reschedule'.
3. Under the 'When' section, increase the end time for the scheduled instance.
Upon completing these steps, the error message no longer appears.
Hope it will help in resolving the error.
Regards,
Ritesh Nayyar

HT1420 How can I deauthorise computers which are no longer functional within the 12 month period.

How can i deauthorise computers which are no longer functional & are within the 12 month period?

Click here and ask the iTunes Store staff for assistance. Only they can perform a second Deauthorize All before the year ends.
(94736)

Open Schedules within the firm zone period

Similar Messages

Maybe you are looking for