Opening up a single image

Is there a way in Photoshop Album Starter Edition 3.2 to download/open an image and have just that single file loaded for viewing, without having any other files within the folder tacked onto it?

Hi Matt,
If I understand you, the answer is yes, but can you explain to me what
you are trying to do?
Cheers

Similar Messages

All of Office 2010 Student and Home Edition Programs open as Microsoft Single Image instances since Installing Outlook 2013

Office 2010 Student and Home Edition has been running without problems on my PC since 2012. Recently installed Microsoft Outlook 2013 (The version of Office 2010 did not include Outlook), since then, every time I open any of the original Office 2010 Programs
eg XCEL, WORD, POWER POINT, ONE NOTE, the program opens in 'Microsoft Office 2010 Single Image' which appears to have to be installed every time any of the programs are opened. The Installation process takes anything up to a few minutes to complete and sometimes
when filing or printing a document, the install restarts, on occasions, in an endless loop which requires random,imaginative keystroke action to terminate. The program shortcut icons all point to the 'Microsoft Office 2010 Single Image' application, I have
not succeeded in finding where the original programs are located as a quick way of trying to fix the problem.
The new installation of Outlook 2013 opens normally.
Evidently, the Outlook 2013 installation has disturbed the 2010 licensing or something ellse, can this unintended change be reversed?
Short of a complete Un-install + Re-Install, I have tried every straightforward repair/ change (run All on my computer)/ enter product code etc option, all to no avail.
I have read of variations on the same problem relating to mixing Office 2003/ 2007, cases of Outlook 2013 starting up in a similar way, but no examples of the specific problem outlined above. The next step
is a complete Un-install + re-install of Office 2010, is this the answer or do I need to go further? Indeed, is there a quick fix?

Hi,
The Microsoft Office Single Image 2010 is a set of tools, documentation, and product files that licensed original equipment manufacturers (OEMs) can use to preload Office on new computers for distribution to end users.
I would suggest you to try the methods listed in this KB article:
http://support.microsoft.com/kb/2528748/en-us Just run the Fix-It tool mentioned in the page, or follow the steps to fix it by yourself.
A similar issue is discussed here, you might have a look:
http://answers.microsoft.com/en-us/office/forum/office_2010-office_install/microsoft-office-single-imagewhat-is-it-exactly/8a3fe920-d2b2-436e-9283-e7c085905692
Thanks,
Ethan Hua CHN
TechNet Community Support

Dragging a single image from mac Preview to InDesign CS6 doesn't work but 2 or more images does?

I usually take anywhere form 2500 to 5000 photos in any single day's session. Because of this, I need an easy way to sort through them and grab just the one's I need to import to my InDesign "book". I have been using CS3 for years now, and what I always did was open up Preview on my Mac to browse all my days photos. Then when I found a good one, I would simply drag that single image over to my opened InDesign screen and just drop it into a page. I would then go back to Preview and continue this procedure until I had looked through all the days images. I could even drag multiple images over and once I was over InDesign I can just click each image and pop them into various pages with ease. Then I upgraded to CS6 and I've hit a kink in the works. When I drag over a single image to InDesign, before I drop it into the page my mouse pointer looks like 3 tiny paste images (the little rectangle with the folded down upper left corner). If I release my mouse to drop the image into InDesign, it just flys back to Preview and doesn't drop into InDesign. Now if I get 2 or more images from Preview, this process works just like it always did. But 1 single image... never. I've tried holding down command, shift, control, option, and combos of those buttons to see if anything changes and it never does. I always get the mouse icon with 3 little paste icons. In CS3 if I dragged a single image it would only show 1 paste icon and 3 icons if I dragged 2 or more, but not in CS6. Is there a setting I'm missing or a preference? I've tried looking through everything that I can find to no avail. There has to be a way??? Thanks!

Use Bridge instead
good luck

How can I keep the front and back of a photo together in a single image?

I'm running PSE 8 on XP with SP3.
I'm getting ready to upgrade to PSE 9.
My cousin just sent me 24 old family photos.
On the back of each photo is a lot of information.
Who is in the picture, where it was taken, what the event was, etc.
What I'd like to be able to do is to scan these images in and somehow keep the front and the back of
each photo together in a single image. That way I can post them to a photo web site and people
can look at the image and read what it is.
I have a Lexmark Pro 205 printer/scanner.
Thanks for any thoughts or suggestions!

I worked on one of the pictures with your Mom and Dad. These scans are quite good and there is a lot of information in them. One can spend a lot of time fixing them up - good project!
Here is what I did:
Duplicated background layer
Applied Brightness/contrast adjustment layer, worked the sliders
Merged down
Sampled sky with eye dropper tool, opened blank layer at top of stack, used brush tool to cover a few of the spots in the sky (?dust)
Merged down
Accessed Smart brush tool, selected black & white in drop down, selected high contrast b&w, covered the sky with that
Selected Yellow filter, and covered the ground
Merged down
Opened a blank layer at top of stack and added a couple of clouds
Applied Photofilter adjustment layer, warming filter LBA, adjusted density
Sharpened slightly with unsharp mask
Merged visible
Applied stroke
On review, the spots in the sky need additional work - they show up more on-line than in PSE. Can be fixed in step #4.

Is there a way to quick import single image while not leaving current import/collection?

I often am working on large import from photo shoot in previous hours or day and don't want to leave the import or collection to edit anything else, when sure enough, I am asked to handle an emergency edit or tune up of a single or small number of images that would only take a few minutes. I don't want to do this and then have to reload my current large import/collection as I am totally focused on it and it would interrupt my workflow, etc. I am missing something or is there no way to load a quick image for touch up without having to leave your current large project? If there is thanks for pointing out, if there is not, could we have a "quick edit" or "spot import" where the single image could be worked on via an "open file" or "quick single image import" from file menu that once completed and exported would leave us right where we left off in our large import editing job? thanks!

If you are using AlbumArt widget you can do this with the widget interface.

How to make a single image with multiple clickable points?

Hi,
I just started using CS4 yesterday, but am pretty confused. I managed my first little achievement with it, but am havign troubles. I'm not even sure of the capabilities of the software to be honest, but I would like to know if I can have a single image, then have sections of it which can be hovered over with a tag and a link to another part of my site. Is this something that can be done?
Thanks!

Hi,
to reach several different links on the image you need to create so-called hotspot (I had to translate the following terms from my German Dreamweaver). How to do?
Click into the image
Open properties window
Open list box orientation.
Surround the image parts in question (look at the green arrow). Feel free/play with chosen forms.
Hans-G.
P.S.
You shouldn't use only images on your site.

When I click attach when sending an email with an attachment I get a dropdown that says "single image" or "default multiple". I choose one. Nothing happens as far as offering a choice as to what doc or photo to attach. What do i need to do?

When I click attach when sending an email with an attachment I get a dropdown that says "single image" or "default multiple". I choose one. Nothing happens as far as offering a choice as to what doc or photo to attach. I continue between the attach and attachment and still nothing .What do i need to do?

Hmmm, Permissions are messed up somewhere!?
Can you open to pic say in Preview, select All, Copy, 7 Paste into Mail?

Resampling/sharpening script for single images

I ask a lot of questions in this forum, but rarely have anything to offer back. Here's an offering that may come in useful in certain situations.
Muppet Mark, a talented Applescript writer, has put together a script to my specifications for resampling and sharpening single images in InDesign. It works in CS2, 3 and 4.
The operation is as follows:
1. You select the image in InDesign.
2. The script resamples to an effective ppi (at printed size) of 300.
3. The script then calls on an Action SHARPEN which applies sharpening via a Smart Unsharp Mask. An edge mask is also applied.
The process is non-destructive, so if the default sharpening is not quite right, it can easily be changed by opening the image in PS.
The script, action and details of operation (148 kB) can be downloaded from:
http://www.mediafire.com/?mij5dnyhtcl
A CS4 test file (88 MB) to see the effect of the script can be downloaded from:
http://www.mediafire.com/?yeymmdievnv

Let me be the first to thank you. Not sure when I'll get a chance to test it, but it could come in handy.

Single image in multiple picture boxes / shapes

hi all,
can anyone help please?
i have several empty picture boxes (they're irregular shapes and all in close proximity to one another) and a single image.
i want the image to appear in the shapes, but not repeated. another way to put it - i want the various segments of the image separated with these shapes... However - i want all of the image to be visible - ie where the image ends at the edge of one shape, i want it to continue in the next image without any gap in the image!
This almost works using Scripts -> Make Grid.... but obviously the shapes I want are all different shapes and sizes, not just a flat grid.
I've tried pasting the image into each box and moving each around with the direct selection tool till they look right - but it isnt practical. im sure there's an easier way of doing it?
hope that makes sense!
thanks very much for your help in advance!!!!

What did you end up doing?
I was actually thinking about this this morning and came up with a way to make freeform shapes using the scissor technique and a supplementary drawn path.
First cut the image frame (and I moved the pieces apart to make it easier to work), then use the Pen tool to draw a random shape path connecting the open end points on one of the pieces, closing the path.
Now select all the points you just added with the Direct Select tool and copy, then paste a copy. You'll probably see an extra point beyond each of the end points you selected, so delete those, then select the path and Object > Paths > Reverse Path (I'm not certain this is necessary).
Move the path into the correct position against the other piece of the cut frame, then select both and Object > Paths > Join.

Single image sequence generation. ?

Hello, ..
Essentially, I'm looking to find the best solution, to the idea of building sequences where and with using - importing, different sequencial, single images.
— To be clearer perhaps, I'm a Weather student / enthusiast, and this would be toward generating a sequence / different sequences .. of hourly weather-satellite obtained images.
To this point, or up until very recently, and in fact for several years previous, I have - in fact, been able to do this fairly simply, with using an older version of QuickTime (older logo, I think that main version offered still, through "Tiger".) and, with once I've dropped a first or more initial image more in particular, into the application, then merely dragging and dropping whichever others into its main viewer-window, checking save, and naming the file.
— Perhaps, unorthodox. But, it's worked just fine for the idea.
— And, of course, this idea can't be used with the newer version/s of QuickTime.
"very recently": .... Today, and with having been using this method of "simple sequence" generation, together with older version of QuickTime, on my relatively new "iMac", and running Snow Leopard, Mac OS X v. 10.6.8 - all up to date, ....
.. I've found that I'm no longer able to access the older version of the application. (I think this advent, might be related to a "MacKeeper" clean-up that I did recently. ....)
— In fact, the main reason that I can't say more exactly, which version it is - or was, in fact.
Beyond this question more general, I'm thinking — (Something, I think that I'd read at one point in the past.) — that I can in fact do what I've suggested above, with / within QuickTime Pro.
Hope this is clear - at all.
Any help. ?
Appreciate your response and time.

Opening an "image sequence" (folder of sequentially named same dimension files) is a feature found only in QuickTime Player Pro.
Beginning with Snow Leopard the OS includes QuickTime Player X (in Lion it is 10.1) in the Applications folder and QuickTime 7.6.6 is moved to the Utilities folder.
QuickTime X has its own feature set but can't be upgraded to "Pro".

I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from

I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it. It has worked in the past but I downloaded the update today and photomerge will not work correctly. Any ideas?

hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Error - Can't open more than one image in CS3

My Photoshop CS3 was working fine until all of a sudden it no longer lets me open more than one image at a time without crashing. Anyone else have this problem? How do I fix it?

Hi,
There may be two issues you have to check:
1) The " scratch disk" feature in photoshop(usually gets full). Go to preferences - performance. Also check how much RAM PS is using.
2) Printer Communication: sometimes Photoshop is unable to communicate with the default printer(may be unstable drivers, out of date etc). Network computers also make some issues
If you want to read more about this follow this link:
http://www.fluther.com/disc/22453/photoshop-cs3-not-opening-more-than-one-image-at-a-time/
They talk about the issues I mentioned here. Let me know if you found this information useful.
Vicente Tulliano

How can I restore a single image from an aperture time machine backup, do I have to restore the entire library? that does not make sense

I hope there has been found a more efficiant solution for this, how can I restore a single image from an aperture time machine backup, I really hope I don't have to restore the entire library? that does not make sense
any suggestions?

Did you try browsing your backups in the Finder ? That is, do not go and "Enter Time Machine". Instead, navigate to your Time Machine backup via Finder and then manually go to the time period (by folder name) you are looking for ... when you find your Aperture library you can then "Show Package Contents" and find the Master you are looking for.

My Iphone 3s is stuck and will not open, I have an image of a USB cord with an arrow pointing up to the Itune music Icon and my phone won't open or be recognized by itunes or my computer.

My Iphone 3s is stuck and will not open, I have an image of a USB cord with an arrow pointing up to the Itune music Icon and my phone won't open or be recognized by itunes or my computer. What do I do now?

Try restoring it using Recovery Mode.

Can i create a single image from multiple images in lightroom?

Can i create a single image from multiple images in lightroom?

Like a panorama, a composite or focus stack? Have you tried the Lightroom forum?
Photoshop Lightroom

Opening up a single image

Similar Messages

Maybe you are looking for