Opening xapp1082 with Vivado 2015.2 gives errors (pl_eth)

After sourcing pl_eth.tcl I get the first problem, I had to update manually (in pl_eth_bd.tcl) the AXI ethernet version from 6.2 to 7.0.
Fixed this problem I get the following:
INFO: [Device 21-403] Loading part xc7z045ffg900-2 Wrote : </home/parallels/vivado/xapp1082_2014_4/hardware/vivado/runs_pl_eth/pl_eth_sfp.srcs/sources_1/bd/design_pl_eth/ip/design_pl_eth_axi_ethernet_0/bd_0/bd_0.bd>
Wrote : </home/parallels/vivado/xapp1082_2014_4/hardware/vivado/runs_pl_eth/pl_eth_sfp.srcs/sources_1/bd/design_pl_eth/ip/design_pl_eth_axi_ethernet_0/bd_0/bd_0.bd>
WARNING: [PS7-6] The applied preset does not match with board preset. You may not get expected settings for board. The ZC706 preset is designed for ZC706 board.
ERROR: [BD 41-80] Exec TCL: Specified object '' does not exist. Please use an existing object name
ERROR: [BD 5-14] Error: running create_bd_segment.
ERROR: [Common 17-39] 'create_bd_addr_seg' failed due to earlier errors. while executing "create_bd_addr_seg -range 0x40000 -offset 0x43C00000 [get_bd_addr_spaces processing_system7/Data] [get_bd_addr_segs axi_ethernet/s_axi/Reg] SEG_axi_et..." (procedure "create_root_design" line 103) invoked from within "create_root_design """ (file "pl_eth_bd.tcl" line 300) while executing "source pl_eth_bd.tcl" (file "pl_eth.tcl" line 21) set_property source_mgmt_mode DisplayOnly [current_project]

I went through the annoying process of opening the xapp1082 design using Vivado 2014.4 (I sourced pl_eth.tcl), then I opened the resulting project using Vivado 2015.2 with no luck. The "upgrade" process got stuck while upgrading one of the IP.
Result is that the bitstream cannot be generated.
Anyone can point in the right direction?
Furthermore, why Vivado is not provided as a web application? Like Google Docs, I mean. This would avoid pushing gigabytes of software to customers. I would pay for such a service.
Regards,
Antonio.

Similar Messages

When I am uploading file with special character it gives error

Hi All,
I am uplloading one file with special character then it gives error. Please let me know solutions on this is soon as possible.
Thanks,
Madhav

hi are you looking for the file to be transferred with the special character then declare it wil the char field...and send it..
or the special charactera are coming unnecessary use the command ............replace all occurances to avoid this..

Call a dll with an activeX component gives error

Hello all,
My program consist of:
- Main program
- DLL's
How it works:
The main program is the interface for the user, this main program call's several dll's
The problem:
The main program runs withought problems, but when it call's a dll, which also call's an activeX component, I get an error.
I then made a executable from the dll which then works ok, no problem.
When I click the retry it runs ok, but when I call it again I get the message again.
The message does allways accur, but still very often
Conclusion:
The error message only comes when I call it as a dll, when the dll is standalone executable no problems occur.
Below you can see how I call the dll:
Can someone please help me with this problem?
greetz,
Bart

Hello Bas,
I have included the vi which calls de dll(executedll.vi) en the dll in VI form(plugin.vi & plugin.lvproj).
As you can see the dll calls the canconfigurator activex component.
And closes the activex component when done.
This plugin will be called several times in the test enviroment.
gr,
Message Edited by darkxceed on 02-12-2010 04:33 AM
Message Edited by darkxceed on 02-12-2010 04:33 AM
Attachments:
ExecuteDLL.vi ‏12 KB
plugin.lvproj ‏8 KB
plugin.vi ‏31 KB

Using boost::thread with Sun Studio C++ gives error

Hi,
I'm trying to compile a code which uses the boost thread library, but I get the following error:
CC -library=stlport4 -features=tmplife -features=tmplrefstatic -mt -c -o t t.cpp
"/opt/boost/include/boost/thread/pthread/mutex.hpp", line 142: Error: The function "pthread_mutex_timedlock" must have a prototype.
"/opt/boost/include/boost/thread/pthread/mutex.hpp", line 142: Error: The function "pthread_mutex_timedlock" must have a prototype.
"/opt/boost/include/boost/thread/detail/thread.hpp", line 344: Error: boost::thread::thread(boost::thread&) is not accessible from boost::move(boost::detail::thread_move_t<boost::thread>).
"/opt/boost/include/boost/thread/pthread/recursive_mutex.hpp", line 179: Error: The function "pthread_mutex_timedlock" must have a prototype.
"/opt/boost/include/boost/thread/pthread/recursive_mutex.hpp", line 179: Error: The function "pthread_mutex_timedlock" must have a prototype.
5 Error(s) detected.
make: *** [t] Error 5the sample source code in question here just a single include:
#include <boost/thread.hpp>This is with boost 1.40.0. I wonder what I'm doing wrong..
Akos

OK, I tried latest version of CC from Sun Studio 12 update 1 and can say that
- the error about constructor not being accessible is Sun C++ compiler "feature" (only called feature because it existed for so long) that allows binding of rvalues to non-const references; this "feature" will probably be turned off in the next release. It can't be changed in a patch because client's code might rely on it.
- the other errors are also not Boost-specific: the result of incompatibility of Linux headers and Sun C++ compiler; more thorough investigation is due, but in the past we had several problems like this. This particular can be solved by adding
-D_GNU_SOURCE to compile line.

Quicktime won't open files; gives Error -43 message.

Whenever I try to open file with quicktime I get an error message reading: "Error -43: a file could not be found (files name)" I have tried re-installing and repairing quicktime. Any suggestions? I am runnig windows Vista.

I've expierenced error 43 in the past myself and the only two things that I was aware of that caused it, was having a drive named in a way QT could not recognize, or the number of characters in a file name being limited to 21 or less.
I have never used Adobe Premiere so have no info on that.
But where you indicate a administrator issue which is related to permissions. This link may give you some info on how to navigate Windows permissions. It is in XP but you can look up for whatever OS is on the computer.
http://support.microsoft.com/kb/308421

While Changing the status system gives error

Dear Experts,
In Solution Manger, While changing the status from Tcode SE38 with Program CRM_SOCM_SERVICE_REPORT system gives error.
Document 8000002519 refused for technical reasons: ERROR_FREE
Message no. SOCM_ACTION_LOG203
Diagnosis
The status value cannot be changed.
The document may no longer be modifiable as a result of its status, or it may be being edited by another user.
System Response
This change transaction is skipped during report processing.
Procedure
Analyze the corresponding document during transaction processing and perform the status change manually if necessary.
Also if i select the status as in process, then it executes sucessfully. Please help me in this.
Ramesh Jaiswal
9867936636

Hi Ramesh,
Pls check your SP level because till SP17 this (CRM_SERV_REPORT) Tcode is not present
I just checked.
So it seems this is availabe only after SP18.... we can use the above report.
Kindly confirm once you solve your problem.
Dirk
Can you please tell us a document which wil tel us what technical things have been changed in this new SP18.for e.g the source for this information.
Regards
Prakhar

Show information in log file under Vivado 2015.1?

In XST and in Vivado through 2014.4 I used something like:
assert false report "FFV_D sees KEEP_HIERARCHY: " & Value(KeepHierarchy) severity NOTE;
to figure out what was going on in Vivado during synthesis.
With Vivado 2015.1, instead of the report from the constant condition assert statement, I now get:
WARNING: [Synth 8-312] ignoring unsynthesizable construct: assertion statement [h:/Eng/MVhdl/Src/Base/MReg.vhd:1731]
Is there some other means to write report information into the Vivado log during synthesis?
I most use this so that I can verify the state of generics within entities, but I use the mechanism all the time for debugging synthesis.
Ian Lewis
www.mstarlabs.com

Hello Brian,
I certainly hope that Vivado has some means of reporting from within HDL.
I agree that removing static condition assert support is a horrible idea, especially since the Vivado synthesis log does not provide even as good information as XST did: http://forums.xilinx.com/t5/Synthesis/Requests-for-Vivado-synthesis-log-changes/td-p/590481 . Or, at least, I cannot interpret the Vivado synthesis log at all well.
I have not yet read enough copies of the log for different conditions to be sure that it is fundamentally unclear, but more and more it looks to me like it just does not include enough information for anyone to know exactly what Vivado has done with respect to generic bindings for specific instances. I know it does not include enough information to even have a clue what it has done with respect to applying attributes.
In any case, even if Vivado synthesis provided a perfect and complete implementation of VHDL, and its log contained every bit of information one could imagine wanting to show how it binds entities and generics, it is essential to be able to see what the compiler is really doing at the level of one's own code: you can read the LRM until you are blue, but at some point you need to see what is really happening in a specific instance of code.
And, there is good reason to report into the log some facts about how one configured an entity at a higher level than the individual generics so you can quickly see that you did what you intended to do.
I could live with changing our asserts to something else, but some means to report into the log is important. It is not just some whim.
Ian Lewis
www.mstarlabs.com

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

When i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th

when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
if you can help me thank's
[email address removed by host]

thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode

Impossible to program a Kintex-7 with Vivado Lab Edition 2015.[1,2]

Hello,
I'm trying to program a Kintex-7 160T with a Platform USB Cable and Vivado Lab Edition 2015.1 and 2015.2. The JTAG chain is shown on the screenshot below:
It is possible to program very small bitstream (~600KiB). But when the bitstreams become bigger, the configuration fails.
Configuring the same FPGA on the same board with Impact 14.2 is working.
How can I configure the FPGA with Vivado Lab Edition?
Olivier

For the following tests, I'm using two bitstream files:
logic.bit:
Very basic design which sets pins to some values.The file is compressed and its size is 676,383 bytes
ISE 14.2 has been used to generate it.
logic_vivado.bit:
It's our design.
Its size is 6,692,674 bytes
Vivado 2014.4 has been used to generate it.
I'm using two computers for these tests:
A Windows7 computer with iMPACT 14.2
A Windows8 computer with Vivado Lab Edition 2015.1
The same board and the same Platform USB Cable (DLC9) were used.
For each tool, I'm configuring the "logic.bit" bitstream and then the "logic_vivado.bit" bistream.
Here is the log of iMPACT 14.2:
Welcome to iMPACT
iMPACT Version: 14.2
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
GUI --- Auto connect to cable...
// *** BATCH CMD : setCable -port auto
INFO:iMPACT - Digilent Plugin: Plugin Version: 2.4.4
INFO:iMPACT - Digilent Plugin: no JTAG device was found.
AutoDetecting cable. Please wait.
PROGRESS_START - Starting Operation.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
Driver file xusbdfwu.sys found.
Driver version: src=1027, dest=1027.
Driver windrvr6.sys version = 10.2.1.0. WinDriver v10.21 Jungo (c) 1997 - 2010 Build Date: Aug 31 2010 x86_64 64bit SYS 14:14:44, version = 1021.
Cable PID = 0008.
Max current requested during enumeration is 280 mA.
Type = 0x0605.
Cable Type = 3, Revision = 0.
Setting cable speed to 6 MHz.
Cable connection established.
Firmware version = 1100.
File version of C:/Programs/Xilinx/14.2/ISE_DS/ISE/data/xusbdfwu.hex = 1100.
Firmware hex file version = 1100.
PLD file version = 0012h.
PLD version = 0012h.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
Type = 0x0605.
ESN not available for this cable.
Attempting to identify devices in the boundary-scan chain configuration...
INFO:iMPACT - Current time: 7/22/2015 5:50:01 PM
// *** BATCH CMD : Identify -inferir
PROGRESS_START - Starting Operation.
Identifying chain contents...'0': : Manufacturer's ID = Xilinx xc7k160t, Version : 0
INFO:iMPACT:1777 -
Reading C:/Programs/Xilinx/14.2/ISE_DS/ISE/kintex7/data/xc7k160t.bsd...
INFO:iMPACT - Using CseAdapterBSDevice
INFO:iMPACT:501 - '1': Added Device xc7k160t successfully.
'1': : Manufacturer's ID = Xilinx xcf32p, Version : 13
INFO:iMPACT:1777 -
Reading C:/Programs/Xilinx/14.2/ISE_DS/ISE/xcfp/data/xcf32p.bsd...
INFO:iMPACT:501 - '1': Added Device xcf32p successfully.
'2': : Manufacturer's ID = Xilinx xcf32p, Version : 13
INFO:iMPACT:501 - '1': Added Device xcf32p successfully.
'3': : Manufacturer's ID = Xilinx xcf32p, Version : 13
INFO:iMPACT:501 - '1': Added Device xcf32p successfully.
'4': : Manufacturer's ID = Xilinx xc7k70t, Version : 0
INFO:iMPACT:1777 -
Reading C:/Programs/Xilinx/14.2/ISE_DS/ISE/kintex7/data/xc7k70t.bsd...
INFO:iMPACT - Using CseAdapterBSDevice
INFO:iMPACT:501 - '1': Added Device xc7k70t successfully.
done.
PROGRESS_END - End Operation.
Elapsed time = 1 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 5 -file "P:/[...]/logic.bit"
'5': Loading file 'P:/[...]/logic.bit' ...
done.
INFO:iMPACT - Using CseAdapterBSDevice
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
Data width read from the bitstream file = 4.
INFO:iMPACT:501 - '5': Added Device xc7k160t successfully.
INFO:iMPACT - Current time: 7/22/2015 5:50:52 PM
// *** BATCH CMD : Program -p 5
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 15000000.
Validating chain...
Boundary-scan chain validated successfully.
1: Device Temperature: Current Reading: 65.14 C, Min. Reading: 41.02 C, Max. Reading: 65.63 C
1: VCCINT Supply: Current Reading: 0.990 V, Min. Reading: 0.987 V, Max. Reading: 0.993 V
1: VCCAUX Supply: Current Reading: 1.813 V, Min. Reading: 1.790 V, Max. Reading: 1.816 V
5: Device Temperature: Current Reading: 58.74 C, Min. Reading: 56.28 C, Max. Reading: 59.23 C
5: VCCINT Supply: Current Reading: 0.987 V, Min. Reading: 0.987 V, Max. Reading: 0.993 V
5: VCCAUX Supply: Current Reading: 1.811 V, Min. Reading: 1.811 V, Max. Reading: 1.813 V
INFO:iMPACT - Creating XC7K160T device.
PROGRESS_START - Starting Operation.
'5': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:Cse - Status register values:
INFO:Cse - 0011 1111 1001 1110 0000 1000 0000 0010
INFO:Cse - '5': Completed downloading bit file to device.
INFO:Cse - '5': Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time = 2 sec.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '5': Checking done pin....done.
'5': Programmed successfully.
// *** BATCH CMD : assignFile -p 5 -file "P:/[...]/logic_vivado.bit"
'5': Loading file 'P:/AS/OCt/dvk310/as1662/logic_vivado.bit' ...
done.
INFO:iMPACT - Using CseAdapterBSDevice
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0XFFFFFFFF.
Data width read from the bitstream file = .
INFO:iMPACT:501 - '5': Added Device xc7k160t successfully.
INFO:iMPACT - Current time: 7/22/2015 5:51:22 PM
// *** BATCH CMD : Program -p 5
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 15000000.
Validating chain...
Boundary-scan chain validated successfully.
1: Device Temperature: Current Reading: 66.13 C, Min. Reading: 41.02 C, Max. Reading: 66.13 C
1: VCCINT Supply: Current Reading: 0.990 V, Min. Reading: 0.987 V, Max. Reading: 0.993 V
1: VCCAUX Supply: Current Reading: 1.813 V, Min. Reading: 1.790 V, Max. Reading: 1.816 V
5: Device Temperature: Current Reading: 58.74 C, Min. Reading: 58.25 C, Max. Reading: 59.23 C
5: VCCINT Supply: Current Reading: 0.990 V, Min. Reading: 0.990 V, Max. Reading: 0.990 V
5: VCCAUX Supply: Current Reading: 1.811 V, Min. Reading: 1.790 V, Max. Reading: 1.813 V
PROGRESS_START - Starting Operation.
'5': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:Cse - Status register values:
INFO:Cse - 0011 1111 1001 1110 0000 1000 0000 0010
INFO:Cse - '5': Completed downloading bit file to device.
INFO:Cse - '5': Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time = 15 sec.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '5': Checking done pin....done.
'5': Programmed successfully.
Now, the log of Vivado 2015.1:
start_gui
open_hw
connect_hw_server
INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121
INFO: [Labtools 27-2222] Launching hw_server...
INFO: [Labtools 27-2221] Launch Output:
****** Xilinx hw_server v2015.1
**** Build date : Apr 27 2015-19:25:29
** Copyright 1986-1999, 2001-2015 Xilinx, Inc. All Rights Reserved.
open_hw_target [lindex [get_hw_targets -of_objects [get_hw_servers localhost]] 0]
INFO: [Labtoolstcl 44-466] Opening hw_target localhost:3121/xilinx_tcf/Xilinx/Port_#0001.Hub_#0005
current_hw_device [lindex [get_hw_devices] 0]
refresh_hw_device -update_hw_probes false [lindex [get_hw_devices] 0]
INFO: [Labtools 27-1434] Device xc7k70t (JTAG device index = 0) is programmed with a design that has no supported debug core(s) in it.
WARNING: [Labtools 27-3123] The debug hub core was not detected at User Scan Chain 1 or 3.
Resolution:
1. Make sure the clock connected to the debug hub (dbg_hub) core is a free running clock and is active OR
2. Manually launch hw_server with -e "set xsdb-user-bscan <C_USER_SCAN_CHAIN scan_chain_number>" to detect the debug hub at User Scan Chain of 2 or 4. To determine the user scan chain setting, open the implemented design and use: get_property C_USER_SCAN_CHAIN [get_debug_cores dbg_hub].
current_hw_device [lindex [get_hw_devices] 4]
refresh_hw_device -update_hw_probes false [lindex [get_hw_devices] 4]
INFO: [Labtools 27-1435] Device xc7k160t (JTAG device index = 4) is not programmed (DONE status = 0).
set_property PROBES.FILE {} [lindex [get_hw_devices] 4]
set_property PROGRAM.FILE {P:/[...]/logic.bit} [lindex [get_hw_devices] 4]
program_hw_devices [lindex [get_hw_devices] 4]
INFO: [Labtools 27-3164] End of startup status: HIGH
refresh_hw_device [lindex [get_hw_devices] 4]
INFO: [Labtools 27-1434] Device xc7k160t (JTAG device index = 4) is programmed with a design that has no supported debug core(s) in it.
WARNING: [Labtools 27-3123] The debug hub core was not detected at User Scan Chain 1 or 3.
Resolution:
1. Make sure the clock connected to the debug hub (dbg_hub) core is a free running clock and is active OR
2. Manually launch hw_server with -e "set xsdb-user-bscan <C_USER_SCAN_CHAIN scan_chain_number>" to detect the debug hub at User Scan Chain of 2 or 4. To determine the user scan chain setting, open the implemented design and use: get_property C_USER_SCAN_CHAIN [get_debug_cores dbg_hub].
set_property PROBES.FILE {} [lindex [get_hw_devices] 4]
set_property PROGRAM.FILE {P:/[...].bit} [lindex [get_hw_devices] 4]
program_hw_devices [lindex [get_hw_devices] 4]
ERROR: [Labtools 27-3165] End of startup status: LOW
program_hw_devices: Time (s): cpu = 00:00:15 ; elapsed = 00:00:15 . Memory (MB): peak = 710.723 ; gain = 0.000
ERROR: [Common 17-39] 'program_hw_devices' failed due to earlier errors.
With Vivado, the configuration of the second file fails because DONE does not rise.

ITunes new version doesn't open at all. Gives error message

I downloaded 7.4.3 version of iTunes and it doesn't open at all. Gives error message. "iTunes has encountered a problem and needs to close."
I have previous version of iTunes in my spare HD, in the same computer, and it works perfectly fine.
I have unistalled and re-installed again and again many times including with the help of Apple Support help in the phone and came up with no clues of what's going on.
How can I get a previous version of iTunes to download to my PC? I have looking for a place on Apple's website where I could probably have my issue resolved, but I found nothing.
Thank you.

Thanks to Jim Zack, the problem is solved.
If you're having this problem, go find the solution at the following page and read Jim's suggestion.
http://discussions.apple.com/thread.jspa?threadID=1155613

Error when opening document with ECL control: INVALID_DATA

Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
David

Hi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David

I've got a mid 2009 MacBook Pro. Today, I updated to Yosemite 10.10.1. I also updated Safari to 8.0.2. Now, anytime I open Safari, it immediately quits and give me an error page that says, Safari unexpectedly quit and suggest that I can click on a

I’ve got a mid 2009 MacBook Pro. Today, I updated to Yosemite 10.10.1. I also updated Safari to 8.0.2. Now, anytime I open Safari, it immediately quits and give me an error page that says, Safari unexpectedly quit and suggest that I can click on a Reopen button and restart it, but it just does it again.
I read some of the questions and responses here and went to ~/Library/Safari and threw out the webpages.db file and emptied the trash and rebooted.
No luck; same problem.
BTW: Mail works
Any ideas how to get around this?

There is no need to download anything to solve this problem.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked.

IE gives "Error opening file" for Sound while it runs fine on Chrome

Is there something with Adobe and IE compatibility ?
When I run a package in Chrome , my audio and video both work fine
Same package when run in IE , video runs fine but the sound gives "Error opening file"

What type of media file? Can you post a link to the problem page online?
HTML5 audio and video is supported by most browsers if you include the proper file types?
MP3 audio
OGA audio
MP4 video
WebM video
OGV video
Nancy O.

Hangs with Javascript busy or stopped error on every website I open

I have firefox 20.0.1 and Java SE 7 U21 10.21.2.11 Plugin installed..I don't have any older versions of Java installed..I have checked and there are no older java consoles or plugins..
For last couple of day..for any website I open (Facebook.com, Espncricinfo.com, dx.com, even Support.mozilla.org or any mozilla troubleshoot page searched through google).. Firefox hangs..then gives me a popup error window with following message;
"A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete." (message is followed by the path of .js script file..different filename for different site)
I disabled Java plugin from "extentions" , restarted firefox and opened facebook. I expected to open facebook properly and get a "no java installed or enable java" error at the most but instead same thing happened and got the same error message..
Even after disabling Java plugin I am getting same error on all websites...
Infact other than opening google and searching I cannot use firefox for any other website..
Even this message I am posting using Opera because firefox wont let me open this page also..
Anyone has any solution?

I have solved this issue..
First of all thanks everyone for suggestions...
Thing is I used to use firefox without any added extensions or add-ons..so my firefox only had plugins/add-ons/extensions installed automatically by programs.. i.e. Flash, Java SE, QuickTime and Foxit Reader plugin..
As previously stated..disabling any or all of thse plugins was not solving the issue..
So I backed up my bookmarks..
I uninstalled firefox... removed all settings and data and profiles...removed any leftover files too...
Then I re-installed firefox using "Run as Administrator" ....
And the issue is solved....
the Flash, QuickTime, Java SE and Reader plugins were automatically enabled after first use...
And so far I have opened lots of websites (which used to hang and give error window) without any issue..I have also played flash games online...and accessed content that needs Javascript enabled..
And I am typing this reply using Firefox only...which was not possible when I had the issue...
I don't know exactly what or why the problem was...but it is solved now..

Opening xapp1082 with Vivado 2015.2 gives errors (pl_eth)

Similar Messages

Maybe you are looking for