Openoffice-base: no PKGBUILD in abs

Hello,
I have been trying to compile openoffice, so I wanted to check out what arch was doing. To my surprise, there is no PKGBUILD inside /var/abs/extra/office/openoffice-base, only some patch files (which I suppose to be the ones applied by the missing PKGBUILD).
Tried deleting the whole abs tree and re synching, with no success. Perhaps the file is missing in the ABS host? (just using default abs config)
Thanks!

Yes, i finally managed to compile openoffice-base, but i had to remove option -P6 (SMP option). Otherwise, i war sunning out of memory, and the system became unusable during compile. The total size became around 6Gb. Although the package could not be created, because of some error i managed to test the patches i'm creating.
No, i want to make some changes to my patches and recompile. Do i have to recompile the whole thing again? If i do a makepkg, current src will be "deleted" and the process will start over. Is something i could do to compile only the parts that have changed?

Similar Messages

ABS PKGBUILD for openoffice-base fails

The PKGBUILD for openoffice-base from the ABS tree is failing on my x86_64 system. The compilation finishes successfully, but I start getting errors beginning at the "# install binaries" stage. Here's the first part of the errors that I get. ((NOTE: I've replaced my username in the paths with 'userdir', for paranoia's sake ))
cp: cannot stat `instsetoo_native/unxlngx6.pro/OpenOffice/native/install/en-US/linux-2.6-x86_64/buildroot/*': No such file or directory
PKGBUILD: line 240: cd: /home/userdir/abs/local/openoffice-base/pkg/opt: No such file or directory
mv: cannot stat `openoffice.org2.4': No such file or directory
cp: cannot stat `/home/userdir/abs/local/openoffice-base/pkg/opt/openoffice/share/xdg/*.desktop': No such file or directory
sed: can't read *.desktop: No such file or directory
sed: can't read printeradmin.desktop: No such file or directory
sed: can't read base.desktop: No such file or directory
sed: can't read calc.desktop: No such file or directory
sed: can't read draw.desktop: No such file or directory
sed: can't read impress.desktop: No such file or directory
sed: can't read math.desktop: No such file or directory
sed: can't read writer.desktop: No such file or directory
sed: can't read *.desktop: No such file or directory
The PKGBUILD then moves through the "# install icons" step without problems. After that, the next round of errors begin:
sed: can't read /home/userdir/abs/local/openoffice-base/pkg/usr/share/applications/calc.desktop: No such file or directory
touch: cannot touch `/home/userdir/abs/local/openoffice-base/pkg/opt/openoffice/share/dict/ooo/.directory': No such file or directory
touch: cannot touch `/home/userdir/abs/local/openoffice-base/pkg/opt/openoffice/presets/template/.directory': No such file or directory
touch: cannot touch `/home/userdir/abs/local/openoffice-base/pkg/opt/openoffice/share/extension/install/.directory': No such file or directory
`./libnpsoplugin.so' -> `/opt/openoffice/program/libnpsoplugin.so'
PKGBUILD: line 308: cd: /home/userdir/abs/local/openoffice-base/pkg/opt/openoffice/program/: No such file or directory
can't find file to patch at input line 3
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|*** soffice.orig 2007-10-27 16:40:34.000000000 +0200
|--- soffice 2007-10-27 16:41:14.000000000 +0200
File to patch:
The PKGBUILD stops at this point. I have to Ctrl^C out of it.
When I look in the directories, I see that instsetoo_native/unxlngx6.pro/OpenOffice/native/install/en-US/linux-2.6-x86_64/buildroot/ does not exist. Instead, that path ends at instsetoo_native/unxlngx6.pro/OpenOffice/native/install/en-US/linux-2.6-x86_64/ , where I find a set of 25 openoffice.org-*.deb files. Removing the 'buildroot' part of the path might fix part of the problem, but I'm guessing something else may be going on here besides that.
Any ideas?

the mirrors with old packages are listed here:
http://wiki.archlinux.org/index.php/Downgrade_packages
for example on http://ftp.parrswood.manchester.sch.uk/ … linux.org/ there is OO 2.2

In need of Openoffice-base 2.3

anyone has a link where Openoffice-base.2.3 can be downloaded, or maybe has it in the cache of pacman. Have a new installation and there Openoffice-2.4 is buggy with the wizard of additonal dictonary installation. On the las 2.3 Openoffice Version it works. thank you

for i686
Couldn't find an x86_64 version

Error on openoffice-base installation

Hello All,
i have a problem with the System updates
when i use pacman -Syu
it give the error that file is or are corrupted
but now i update system one by one installation.
now the main problem is that the openoffice is not function well so remove it from pc.
but when i am triyng to install it download after some(MB) or full and give these kind of errors.
pacman -S openoffice-base
resolving dependencies...
looking for inter-conflicts...
Targets (1): openoffice-base-3.1.1-2
Total Download Size: 137.80 MB
Total Installed Size: 287.92 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
error: failed retrieving file 'openoffice-base-3.1.1-2-i686.pkg.tar.gz' from ftp.belnet.be-----------------------------] 0%
warning: failed to retrieve some files from extra
error: failed to commit transaction (failed to retrieve some files)
Errors occurred, no packages were upgraded.
i change mirros.
update pacman,
but now i dont understand what to do ?
i need openoffice for some work
anybody knows what to do now...
Thanks

Looks like something is wrong at belnet.be... Try change your mirror, and do a pacman -Syy then try again.
Try uncomment only one mirror at any time. There should be one mirror that has it.

Trouble with ibus+libreoffice but not with ibus+openoffice-base

I've been having this problem with libreoffice ever since the switch. I use ibus with the following settings:
XMODIFIERS="@im=ibus"
GTK_IM_MODULE="ibus"
KDE_IM_MODULE="ibus"
but if I launch libreoffice the application doesn't respond to any keyboard events, even shortcuts (i.e. ctrl+Q). In addition the ibus-daemon process starts taking up full CPU time. I've tried setting "xim" instead of "ibus" but when I do that I can type, but the characters don't get "committed."
I've just installed openoffice-base and this time ibus works as intended.

Jodell wrote:Does the fix in this thread work? https://bbs.archlinux.org/viewtopic.php?id=112433
Yes it does, thank you.
quoting for posterity, boldface mine:
darehanl wrote:
@gorudonu
Just a quick question. Do you happen to use KDE? Try adding this line:
export OOO_FORCE_DESKTOP="gnome"
to $HOME/.xprofile . Adding that fixed the problem for me (although you get ugly GNOME file dialogs). Looks like the new KDE integration code added to libreoffice is the culprit.

How to connect Openoffice Base with java and retrive data from it?

I need to retrive data from Openoffice-Base in windows through java. Is there any driver which helps to retrive data from Openoffice-Base.

[http://tinyurl.com/nfvbbg]

Xkbcomp Errors/Warnings: openoffice-base & go-openoffice

Occurs after launching any openoffice-base /go-openoffice app. Is there a known resolution(s)/workaround(s)?
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
Errors from xkbcomp are not fatal to the X server

Errors from xkbcomp are not fatal to the X server
Does these errors have any negative on openoffice? They will probably dissipate next time you upgrade xorg.
Check this thread: http://bbs.archlinux.org/viewtopic.php?id=54015

Go-openoffice conflicts with openoffice-base

I installed go-openoffice and need Chinese support, so I tried to install openoffice-zh-CN, it told me openoffice-base will be installed and asked me if I want to remove go-openoffice.
There two seems conflict with each other, is there any way I can have language addon with go-openoffice?
Thanks!

http://aur.archlinux.org/packages.php?ID=26188

Openoffice-base-2.0.2-2 is corrupted

there is no way i can download a valid openoffice-base-2.0.2-2.. tried several days now.. bug-reported it, but tpowa said it was fine.. anyone else having this problem.. tried several servers etc..

gizmo wrote:havent had any problems with the net in other situations.. anyway.. downloaded the package through firefox.. installed ok..
other situations? Most mirrors are ftp-server. Maybe it is only a ftp related thing.
Tools for checking are ping and traceroute.
Greets
dojo

Is theAirPort Express Base Station compatible with ABS 'Snow'?

I want to extend my wireless network which I currently access via an ABS 'Snow'. Can I add an AirPort Express Base Station to my existing network? I understand my ABS 'Snow' is slower than the the new 802.11n specification, is there anything else I should be aware of?
Thanks

Thanks for your reply. My ABS is white with a graphite logo, has an internal modem port, WAN Ethernet, LAN Ethernet all situated at the back/top, aong with a power adaptor port and security slot. Is this actually a 'Snow' ABS?

[SOLVED] Compiling kernel PKGBUILD from ABS (2.6.34)

So I'm currently compiling a kernel from ABS, and its been running som docbook stuff for 2-3 hours now which I've never seen before when compiling a kernel with ABS.
I commented out the line that allowed me to edit the config with make menuconfig. I tweaked the kernel to 1000hz and set up my cpu family.
Is this normal? Im pretty sure this didnt happen when I compiled 2.6.33.4 from ABS
This is what its been spamming for the past ~2 hours:
Note: Writing struct_usb_host_ss_ep_comp.9
Warn: meta author : no refentry/info/author struct usb_host_endpoint
Note: meta author : see http://docbook.sf.net/el/author struct usb_host_endpoint
Warn: meta author : no author data, so inserted a fixme struct usb_host_endpoint
Note: Writing struct_usb_host_endpoint.9
Warn: meta author : no refentry/info/author struct usb_interface
Note: meta author : see http://docbook.sf.net/el/author struct usb_interface
Warn: meta author : no author data, so inserted a fixme struct usb_interface
Note: Writing struct_usb_interface.9
Warn: meta author : no refentry/info/author struct usb_interface_cache
Note: meta author : see http://docbook.sf.net/el/author struct usb_interface_cache
Warn: meta author : no author data, so inserted a fixme struct usb_interface_cache
Last edited by XAM (2010-06-29 06:19:50)

Coacher wrote:Since 2.6.34 there is also kernel26-manpages and kernel26-docs packages that also placed in kernel26 PKGBUILD.
I've never compiled that docs stuff for myself so cant say how long it takes, but if you need only new kernel26 package you can safely wipe out that lines from PKGBUILD.
wow, thats good to hear. Took ages compiling with it there.

Chromium PKGBUILD in ABS

I've noticed that the PKGBUILD that I see in ABS [extra] is chromium version 9.0.600.0, whereas the version in the official [extra] repository is 8.0.552.224 .
Why is there a mismatch in version? I've noticed this for a week or so now, so it's not to do with delays in syncing.

somebody decided that 9.x might be stable but then he saw is not.
move along

OpenOffice Base - MySQL with JDBC connection

I was using MySQL with ODBC connection, but cannot do all MySQL queries. In OO Forum says dev version does with JDBC.
http://www.oooforum.org/forum/viewtopic.phtml?t=41301
I am now using OpenOffice dev version. I am a bit lost when asked to install MySQL JDBC Driver Class:
com.mysql.jdbc.Driver
Is the driver a part of jre package or to be installed from somewhere?

I downloaded, but don't know where and how to install or use it. Took a look at the documentation, seems it requires only to untar but something has to be pointed. I think its something simple but I am overlooking.
EDIT
This thread tells how to do...
http://www.oooforum.org/forum/viewtopic.phtml?t=33199

Postfix PKGBUILD in ABS.

I wanted to compile postfix with mysql support, since it doesn't seem to be included in the arch build.
*cursory whining*
When I looked at the pkgbuild, it looked funny.
# $Id: PKGBUILD,v 1.28 2004/12/13 05:45:29 jason Exp $
# Contributor: Jeff Brodnax <[email protected]>
# Maintainer: dale <[email protected]>
pkgname=postfix
pkgver=2.1.5
pkgrel=3
pkgdesc="Secure, fast, easy to administer drop in replacement for Sendmail (MTA)"
depends=('glibc' 'db' 'pcre')
# leave etc/mail/aliases in backup() for a few versions until
# people have migrated or made other provisions
backup=(etc/mail/aliases etc/postfix/aliases etc/postfix/virtual etc/postfix/relocated
etc/postfix/access etc/postfix/header_checks etc/postfix/transport
etc/postfix/main.cf etc/postfix/master.cf)
install="$pkgname.install"
url="http://www.postfix.org/"
source=(ftp://ftp.porcupine.org/mirrors/postfix-release/official/$pkgname-$pkgver.tar.gz
$pkgname.patch.bz2
$pkgname
$pkgname.install)
md5sums=('bcaa4aac80595d04c60c72844203a04d' 'a3c45ff23ef036143711793fcf2478c3'
'eb5f290655559bbdfbf7b9791aeb4a64' '469ce1ce887bafb2afd243c4c64c843a')
provides=('smtp-server')
build() {
cd $startdir/src/$pkgname-$pkgver
make OPT="${CFLAGS}" || return 1
sh postfix-install -non-interactive
install_root="$startdir/pkg"
daemon_directory="/usr/lib/$pkgname"
sample_directory="/etc/$pkgname/sample"
manpage_directory="/usr/man"
cd $startdir/pkg
cat $startdir/src/$pkgname.patch |patch -Np0 || return 1
rm etc/$pkgname/main.cf~
cd $startdir/pkg
mkdir etc/rc.d
install -m 0755 $startdir/src/$pkgname etc/rc.d/$pkgname
Why is the CFLAGS in there?
Also, no configure? I assume that postfix makefile does some hijinks then, but where do I manually specify different build options?

I can't get postfix to build with mysql support. It keeps crapping out on
I did some googling, and found this:
http://www.mail-archive.com/freebsd-que … 55583.html
That is about the exact errors that I am getting.
Anyone have any ideas?
[src/error]
gcc -Wmissing-prototypes -Wformat -DHAS_MYSQL -I/usr/include/mysql -DHAS_PCRE -g -march=i686 -O2 -pipe -I. -I../../include -DLINUX2 -c error.c
gcc -Wmissing-prototypes -Wformat -DHAS_MYSQL -I/usr/include/mysql -DHAS_PCRE -g -march=i686 -O2 -pipe -I. -I../../include -DLINUX2 -o error error.o ../../lib/libmaster.a ../../lib/libglobal.a ../../lib/libutil.a -L/usr/lib/mysql -lmysqlclient -lz -lm -L/usr/lib -lpcre -ldb -lnsl -lresolv
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x36): In function `report_errors':
: undefined reference to `ERR_get_error_line_data'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0xc7): In function `vio_ssl_read':
: undefined reference to `SSL_read'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0xee): In function `vio_ssl_read':
: undefined reference to `SSL_get_error'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x132): In function `vio_ssl_write':
: undefined reference to `SSL_write'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x305): In function `vio_ssl_close':
: undefined reference to `SSL_shutdown'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x315): In function `vio_ssl_close':
: undefined reference to `SSL_free'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x46f): In function `sslaccept':: undefined reference to `SSL_new'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x4cb): In function `sslaccept':: undefined reference to `SSL_clear'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x4d9): In function `sslaccept':: undefined reference to `SSL_get_session'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x4e8): In function `sslaccept':: undefined reference to `SSL_SESSION_set_timeout'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x4fc): In function `sslaccept':: undefined reference to `SSL_set_fd'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x50a): In function `sslaccept':: undefined reference to `SSL_set_accept_state'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x518): In function `sslaccept':: undefined reference to `SSL_do_handshake'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x52e): In function `sslaccept':: undefined reference to `SSL_get_peer_certificate'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x53e): In function `sslaccept':: undefined reference to `X509_get_subject_name'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x550): In function `sslaccept':: undefined reference to `X509_NAME_oneline'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x560): In function `sslaccept':: undefined reference to `X509_get_issuer_name'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x574): In function `sslaccept':: undefined reference to `X509_NAME_oneline'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x584): In function `sslaccept':: undefined reference to `X509_free'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x5a5): In function `sslaccept':: undefined reference to `SSL_get_shared_ciphers'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x5c5): In function `sslaccept':: undefined reference to `SSL_free'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x646): In function `sslconnect':
: undefined reference to `SSL_new'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x6a4): In function `sslconnect':
: undefined reference to `SSL_clear'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x6b2): In function `sslconnect':
: undefined reference to `SSL_get_session'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x6c1): In function `sslconnect':
: undefined reference to `SSL_SESSION_set_timeout'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x6d5): In function `sslconnect':
: undefined reference to `SSL_set_fd'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x6e3): In function `sslconnect':
: undefined reference to `SSL_set_connect_state'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x6f1): In function `sslconnect':
: undefined reference to `SSL_do_handshake'
/usr/lib/mysql/libmysqlclient.a(viossl.o)(.text+0x70a): In function `sslconnect':
: undefined reference to `SSL_free'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x8): In function `get_dh512':
: undefined reference to `DH_new'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x29): In function `get_dh512':
: undefined reference to `BN_bin2bn'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x47): In function `get_dh512':
: undefined reference to `BN_bin2bn'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x5f): In function `get_dh512':
: undefined reference to `DH_free'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0xa3): In function `report_errors':
: undefined reference to `ERR_get_error_line_data'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0xeb): In function `vio_set_cert_stuff':
: undefined reference to `SSL_CTX_use_certificate_file'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x10d): In function `vio_set_cert_stuff':
: undefined reference to `SSL_CTX_use_PrivateKey_file'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x119): In function `vio_set_cert_stuff':
: undefined reference to `SSL_CTX_check_private_key'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x167): In function `vio_set_cert_stuff':
: undefined reference to `ERR_print_errors_fp'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x1d3): In function `vio_set_cert_stuff':
: undefined reference to `ERR_print_errors_fp'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x20c): In function `vio_verify_callback':
: undefined reference to `X509_STORE_CTX_get_current_cert'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x216): In function `vio_verify_callback':
: undefined reference to `X509_STORE_CTX_get_error'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x21e): In function `vio_verify_callback':
: undefined reference to `X509_STORE_CTX_get_error_depth'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x232): In function `vio_verify_callback':
: undefined reference to `X509_get_subject_name'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x247): In function `vio_verify_callback':
: undefined reference to `X509_NAME_oneline'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x2a7): In function `vio_verify_callback':
: undefined reference to `X509_get_issuer_name'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x2bc): In function `vio_verify_callback':
: undefined reference to `X509_NAME_oneline'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x321): In function `new_VioSSLConnectorFd':
: undefined reference to `TLSv1_client_method'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x32c): In function `new_VioSSLConnectorFd':
: undefined reference to `SSL_CTX_new'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x348): In function `new_VioSSLConnectorFd':
: undefined reference to `SSL_CTX_set_cipher_list'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x361): In function `new_VioSSLConnectorFd':
: undefined reference to `SSL_CTX_set_verify'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x38c): In function `new_VioSSLConnectorFd':
: undefined reference to `SSL_CTX_load_verify_locations'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x3b4): In function `new_VioSSLConnectorFd':
: undefined reference to `SSL_CTX_ctrl'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x3bc): In function `new_VioSSLConnectorFd':
: undefined reference to `DH_free'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x3d6): In function `new_VioSSLConnectorFd':
: undefined reference to `SSL_CTX_set_default_verify_paths'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x3fe): In function `new_VioSSLConnectorFd':
: undefined reference to `SSL_load_error_strings'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x40f): In function `new_VioSSLConnectorFd':
: undefined reference to `OPENSSL_add_all_algorithms_noconf'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x46a): In function `new_VioSSLAcceptorFd':
: undefined reference to `TLSv1_server_method'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x475): In function `new_VioSSLAcceptorFd':
: undefined reference to `SSL_CTX_new'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x491): In function `new_VioSSLAcceptorFd':
: undefined reference to `SSL_CTX_set_cipher_list'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x4b8): In function `new_VioSSLAcceptorFd':
: undefined reference to `SSL_CTX_ctrl'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x4cf): In function `new_VioSSLAcceptorFd':
: undefined reference to `SSL_CTX_set_verify'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x4e9): In function `new_VioSSLAcceptorFd':
: undefined reference to `SSL_CTX_set_session_id_context'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x514): In function `new_VioSSLAcceptorFd':
: undefined reference to `SSL_CTX_load_verify_locations'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x53c): In function `new_VioSSLAcceptorFd':
: undefined reference to `SSL_CTX_ctrl'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x544): In function `new_VioSSLAcceptorFd':
: undefined reference to `DH_free'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x557): In function `new_VioSSLAcceptorFd':
: undefined reference to `SSL_CTX_set_default_verify_paths'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x57e): In function `new_VioSSLAcceptorFd':
: undefined reference to `SSL_load_error_strings'
/usr/lib/mysql/libmysqlclient.a(viosslfactories.o)(.text+0x58f): In function `new_VioSSLAcceptorFd':
: undefined reference to `OPENSSL_add_all_algorithms_noconf'
collect2: ld returned 1 exit status
make: *** [error] Error 1
make: *** [update] Error 1
make: *** [update] Error 2
==> ERROR: Build Failed. Aborting...
Here is the only modified line in the pkgbuild:
make OPT="${CFLAGS}" CCARGS="${CCARGS} -DHAS_MYSQL -I/usr/include/mysql " AUXLIBS="${AUXLIBS} -L/usr/lib/mysql -lmysqlclient -lz -lm " || return 1

Using ABS to compile OpenOffice with KDE3 support?

Hallo,
So I'm trying to use ABS to compile OpenOffice with KDE3 support so I can use the KDE file picker (the KDE4 support is really, really broken and too new to be used right now). I pulled Openoffice-base out of my ABS tree and modified the PKBUILD so that kde was enabled and I made kdelibs3 part of the dependencies.
However, it always says "checking whether KDE is between 3.2 and 3.6... configure: error: KDE version too old or too recent, please use another version of KDE or disable KDE address book support" before failing to compile. I know it's because I'm using KDE4. Is there a way I can trick it into thinking I'm using KDE3?
It says the path to kdelibs is /usr/lib, perhaps if I changed it to the path to kdelibs3? Where would I do that in the PKBUILD?
Thanks a lot!

bstaletic wrote:The weird part, at least to me, is that I saw a lot more then 19 modules during compilation. Is this expected for some reason or have I messed something up?
Your build method seems ok to me. Can't really say anything about the .config, but kernel modules can have dependencies too. For example, if you choose to build ext4 as a module, it selects at least jdb2 and crc16 modules to be built as well.

Openoffice-base: no PKGBUILD in abs

Similar Messages

Maybe you are looking for