"Operating system file operation on file IFile failed" error.
Hi there,
Does someone got a clue about the error "Operating system file operation on file IFile failed" occurring from time to time when scheduling Webi and Deski reports?
This occurs on a cluster environment with 2 servers (BOXI R2 SP2).
Regards,
Jeff
Hi Jeff,
-This error is usually associated with the system not being able to access the FRS when
BOE is trying to read the report.
-Also, could you please check that your document names should not have dot (.)
-It's also possible this could be permissions related could you please monitor the
system for any 'access denied' results and see if this is related to permissions.
Regards,
Sarbhjeet Kaur
Similar Messages
-
File Open failed Error in Process Chain
Hi,
Our process chains are failing at the last step of event trigger.The file is not getting created in the directory as a result of which the BO reports are not getting triggered.Kindly help.
Regards,
ShalakaPl find the below code:
DATA mesg(80) VALUE 'BW load complete. Ready for BOBJ Refresh. File Created on : '.
DATA fname(60).
DATA pc_flag TYPE rspc_state.
* Get the folder and file name from parameter
PARAMETERS p_fname TYPE string LOWER CASE.
AT SELECTION-SCREEN.
START-OF-SELECTION.
fname = p_fname.
*Add the system date into the file.
CONCATENATE mesg sy-datum INTO mesg.
CALL FUNCTION 'AUTHORITY_CHECK_DATASET'
EXPORTING
* PROGRAM =
activity = 'DELETE'
filename = fname
EXCEPTIONS no_authority = 1
activity_unknown = 2
OTHERS = 3 .
IF sy-subrc = 0.
*Delete the file if it is already existing
DELETE DATASET fname.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
MESSAGE i051(rsar) WITH 'No Authorizations to delete the file'.
ENDIF.
WAIT UP TO 65 SECONDS.
*Set the flag for the process chain to read if file deletion fails.
IF sy-subrc <> 0." The ABAP program failed
pc_flag = zcl_abap_bobj_event_trg=>failed.
ELSE. " The ABAP program was successful
pc_flag = zcl_abap_bobj_event_trg=>success.
ENDIF.
CALL FUNCTION 'AUTHORITY_CHECK_DATASET'
EXPORTING
activity = 'WRITE'
filename = fname
EXCEPTIONS
no_authority = 1
activity_unknown = 2.
IF sy-subrc <> 0.
MESSAGE i051(rsar) WITH 'No Authorizations to Write to file'.
ELSE.
*Create the file based on the input from variant including folder and file name.
OPEN DATASET fname FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*Set the flag for the process chain to read if file creation fails.
IF sy-subrc <> 0.
MESSAGE i051(rsar) WITH 'File open failed.'.
pc_flag = zcl_abap_bobj_event_trg=>failed.
ELSE. " The ABAP program was successful
TRANSFER mesg TO fname.
pc_flag = zcl_abap_bobj_event_trg=>success.
ENDIF.
CLOSE DATASET fname.
ENDIF.
EXPORT e_state FROM pc_flag TO DATABASE indx(bo) ID
zcl_abap_bobj_event_trg=>status_idx_id. -
Ias Failed to start with "OPMN log file open failed" error message.
Hi,
My iAS doesn't start and I get this error message. Any advice? Thanks.
opmnctl: starting opmn and all managed processes...
OPMN log file open failed: /.../opmn/logs/ons.log (Read-only file system).
opmnctl: opmn start failedHi,
Haven't you re-posted your question exactly after a year?
take a look here.
iAS not running due to OPMN log file open failed: opmn/logs/ons.log (Read-o -
The share operation master file has failed error -1
I can not export. I keep getting this message. Can anyone help me? I am running Final Cut Pro X.
curtoy222 wrote:
I can not export.
You can't export…a specific project…or any project…choosing a specific Share destination…or any Share destination?
What are your system specs – and where do you have your events and projects stored?
What format is the media you're using?
Russ -
Error encountered in Rapid clone (control file creation failed)
hi all,
i have 2- node ERP server running EBS 11.5.10 with database 9.2.0.5 and OS HP UX 11.11
while running perl adcfgclone.pl dbTier
i encountered the following error
Verifying correctness of adcrdbclone.sql
RC-00115: Not able to read temp001.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp002.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp003.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp004.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp005.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp006.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp001.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp002.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp003.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp004.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp005.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00115: Not able to read temp006.dbf
Raised by oracle.apps.ad.clone.ApplyDatabase
RC-00116: Error while reading dbf files. Control file creation will fail.
an later part of log file
Creating the control file for DVP_test database ...
SQL*Plus: Release 9.2.0.5.0 - Production on Sun Jan 11 18:29:27 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 598700552 bytes
Fixed Size 737800 bytes
Variable Size 419430400 bytes
Database Buffers 167772160 bytes
Redo Buffers 10760192 bytes
Control file created.
Database altered.
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp001.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp002.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp003.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp004.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp005.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
alter tablespace TEMP1 add tempfile '/oradvp/ora/proddata/temp006.dbf' REUSE
ERROR at line 1:
ORA-00959: tablespace 'TEMP1' does not exist
but when i query v$tablespace it shows temporary tablespace is TEMP not temp1
even on my production system the TEMPORARy Tablespace is TEMP
when i see the alert file
it says
Tablespace 'TEMP' #2 found in data dictionary,
but not in the controlfile. Adding to controlfile.
File #143 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00143' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #144 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00144' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #145 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00145' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #146 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00146' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #147 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00147' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #148 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00148' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #149 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00149' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #150 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00150' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #151 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00151' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #152 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00152' in the controlfile.
This file can no longer be recovered so it must be dropped.
File #153 found in data dictionary but not in controlfile.
Creating OFFLINE file 'MISSING00153' in the controlfile.
This file can no longer be recovered so it must be dropped.
how can i come out though this confusion??i have opened the database but what about the next porcess now
Beginning database tier Apply - Sun Jan 11 17:31:13 2009
Log file located at /oradvp/ora/proddb/9.2.0/appsutil/log/DVP_test/ApplyDBTier_01110531.log
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
ERROR: Failed to execute adclone.pl
Please check logfile.
logfile says
Checking for errors ...
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00959: tablespace 'TEMP1' does not exist
ORA-00376: file 148 cannot be read at this time
ORA-01111: name for data file 148 is unknown - rename to correct file
ORA-01110: data file 148: '/oradvp/ora/proddb/9.2.0/dbs/MISSING00148'
ORA-00600: internal error code, arguments: [1236], [], [], [], [], [], [], []
ORA-24313: user already authenticated
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ORA-24313: user already authenticated
ORA-01031: insufficient privileges
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 9.2.0.5.0 - Production on Sun Jan 11 18:30:01 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Disconnected
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : test
sDbDomain : khannapaper.com
sDbPort : 1528
sDbSid : DVP
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@test.khannapaper.com:1528:DVP
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.khannapaper.com)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=DVP)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.khannapaper.com)(PORT=1528))(CONNECT_DATA=(SERVICE_NAME=DVP.khannapaper.com)))
Exception occurred: java.sql.SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=153093376)(ERR=12514)(ERROR_STACK=(ERROR=(CODE=12514)(EMFI=4))))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:469)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:314)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:290)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:131)
at java.lang.reflect.Constructor.newInstance(Native Method)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Unknown Source)
and why does it shows temporary tablespace TEMP1
but in real it is TEMP
i dropped around 50 days back from production and added TEMP to it -
RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation failed
There's anyone ever get error like this?
[oradev@ebs bin]$ ./adcfgclone.pl dbTier
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Copyright (c) 2011 Oracle Corporation
Redwood Shores, California, USA
Oracle E-Business Suite Rapid Clone
Version 12.2
adcfgclone Version 120.63.12020000.7.1202010.2
Enter the APPS password :
Running:
/u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -cp /u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc5.jar oracle.apps.ad.context.CloneContext -e /u01/DEV/11.2.0/appsutil/clone/bin/../context/db/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_21933.lst -stage /u01/DEV/11.2.0/appsutil/clone 2> /tmp/adcfgclone_21933.err; echo $? > /tmp/adcfgclone_21933.res
Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
Provide the values required for creation of the new Database Context file.
Target System Hostname (virtual or normal) [ebs] :
Target Instance is RAC (y/n) [n] :
Target System Database SID : DEV
Target System Base Directory : /u01/DEV
Target System utl_file_dir Directory List : usr/tmp
RC-00213: Warning: The path specified must be the absolute path
Target System utl_file_dir Directory List : /usr/tmp
Number of DATA_TOP's on the Target System [1] :
Target System DATA_TOP Directory 1 [/apps/DEV/data] : /u01/DEV/data
Target System RDBMS ORACLE_HOME Directory [/u01/DEV/11.2.0] :
Do you want to preserve the Display [null] (y/n) : n
Target System Display [ebs:0.0] :
Do you want the target system to have the same port values as the source system (y/n) [y] ? : n
Target System Port Pool [0-99] : 0
Checking the port pool 0
RC-50221: Warning: Port Pool 0 is not free. Please check logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for conflicts.
Target System Port Pool [0-99] : 0
Checking the port pool 0
done: Port Pool 0 is free
Report file located at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
Complete port information available at /u01/DEV/11.2.0/appsutil/temp/portpool.lst
Creating the new Database Context file from :
/u01/DEV/11.2.0/appsutil/template/adxdbctx.tmp
The new database context file has been created :
/u01/DEV/11.2.0/appsutil/DEV_ebs.xml
Log file located at /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log
Check Clone Context logfile /u01/DEV/11.2.0/appsutil/clone/bin/CloneContext_0329113348.log for details.
Running Rapid Clone with command:
Running:
perl /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl java=/u01/DEV/11.2.0/appsutil/clone/bin/../jre mode=apply stage=/u01/DEV/11.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/u01/DEV/11.2.0/appsutil/DEV_ebs.xml showProgress contextValidated=true
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Beginning database tier Apply - Sun Mar 29 11:35:27 2015
/u01/DEV/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/u01/DEV/11.2.0/oui -classpath /u01/DEV/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojdbc6.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/java:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/ewt3.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/share.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/oui/srvm.jar:/u01/DEV/11.2.0/appsutil/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyDBTier -e /u01/DEV/11.2.0/appsutil/DEV_ebs.xml -stage /u01/DEV/11.2.0/appsutil/clone -showProgress
APPS Password : Log file located at /u01/DEV/11.2.0/appsutil/log/DEV_ebs/ApplyDBTier_03291135.log
\ 50% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
Sun Mar 29 11:46:03 2015
ERROR: Failed to execute /u01/DEV/11.2.0/appsutil/clone/bin/adclone.pl
Please check logfile.
[oradev@ebs bin]$perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C")
Please check - $ env | grep LC
If its set to LC_CTYPE = UTF-8 then unset or set it to blank value i.e. export LC_CTYPE =
Please see - ODA: oakcli command failed with perl: warning: Setting locale failed. (Doc ID 1526079.1)
-Kj -
Sapinstallation error in second step Install common system File.
Hi,
I am installing the SOLMAN on Linux RHEL5 and i am facing the error in second step Install common system File .
sapinst.log ERROR Logs ;
Output of /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh is written to the logfile installsapinit.sh.log.
WARNING 2011-08-15 09:56:21.770
Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
ERROR 2011-08-15 09:56:21.774
MUT-03011 Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
ERROR 2011-08-15 09:56:21.913
FCO-00011 The step installSAPInit with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_System|ind|ind|ind|ind|system|0|installSAPInit was executed with status ERROR ( Last error reported by the step: Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found).
Can any one please help me on this...Hello,
the "uname" command is part of the coreutils package on RHEL. Please check if the coreutils package is installed:
rpm -qa | grep -i coreutils
If the coreutils package is not installed you can install it with
yum install coreutils
Regards,
Frank -
Hi all,
I install iplanet Directory Server5.1p1 on Solaris 8. These errors fill full in my error log files
"PR_Accept() failed, error -5971 (Process open FD table is full.)"
I use idsktune tool and detect i face the problem file descripton. I have increase to 4096 ( in /etc/system file and ulimit -n 4096), but these errors still exist in my error logs.
Who know this prolem, pls give us a solution to fix this errors
Thank alot
Best RegardsI suggest you try the Directory Server forum.
-
Hi all,
I install iplanet Directory Server5.1p1 on Solaris 8. These errors fill full in my error log files
"PR_Accept() failed, error -5971 (Process open FD table is full.)"
I use idsktune tool and detect i face the problem file descripton. I have increase to 4096 ( in /etc/system file and ulimit -n 4096), but these errors still exist in my error logs.
Who know this prolem, pls give us a solution to fix this errors
Thank alot
Best RegardsHi!
To increase the FDs available for DS, edit the Configuration --> Performance Settings and increase the no. of FDs available for DS. please check if you havent done this.
I faced the similar problem. Increased the system limit(/etc/system) and DS setting, but was still recieving the error message time to time, which disappears automatically, when FDs get freed. The server is quite a busy LDAP server.
Can someone comment how can i see the actual Fd utilisation on a Solaris 8 system.
I have been checking like:
ls -l /procs/fd | wc -l
and by:
ls -l /procs/pid-of-slapd/fd | wc -l
But always find the Fds in use to be quite lesser than the limit specified 4096.
Thanks for sharing.
Cheers!
VIvek -
My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?
That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.
-
Operating system file operation on file c9456ea79110a0.rpt failed.
I have a report that failed this morning with the following error message: Operating system file operation on file c9456ea79110a0.rpt failed.
I don't understand what to do about getting this resolved, I've never seen this error message before.
ThanksBy the way I tried to run a completely different report and I got the same error message.
I also rebooted the server and still get the same error. I'm still trying to troubleshoot this problem, so if anyone has any ideas about what to try next I'm open to anything. -
The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?
https://discussions.apple.com/thread/6219522
-
I did try in all of them and it doesnt work it apears like that........
The share operation Master File has failed
The operation could not be completed because an error occurred when creating frame 608 (error -1).
and i dont know what to do plese hlp me....
Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please helpDouble post…
-
Export Problems: "The share operation Master File has failed"
When I try to export anything out of fcprx whatever the setting I get this "The share operation Master File has failed- The operation could not be completed because an error occurred when creating frame 1406 (error -1)"
I have read that it a dodgy import but I did it correct this time?
Any Idea how I can stop this?
CheersHave tried to disable nap? http://reviews.cnet.com/8301-13727_7-57612009-263/how-to-disable-app-nap-in-os-x -mavericks/
-
Access to operating system files
I wonder if anyone could help me. I am looking for a way to access and manipulate operating system files. I would like to be able to rename, and delete o/s files. Also, is there any way to be able to execute operating system commands through java by passing the commands as a string parameter?
Any help would be appreciated.
ThanksI would like to be able to rename, and delete o/s files
Why do you want to do this??What is your program suppose to do, is this all your program suppose to do? if so it dont sound like a very nice program and also what type of code you have so far for it
Maybe you are looking for
-
Set ajax value to the textbox[in modal box jquery]
Hi, In my page i have one interactive report with 2 button add and edit, i have used modal box j-query for the button add and edit. Adding the data through modal box working fine. when tried to edit the existing data i am not able set the data to the
-
Must restart after installing firefox and kde...WHY????
Every time I set up an arch box, when I install firefox or kde (probably others) I must restart the computer before I can even execute them. This is mighty inconvenient and un-linux-like, I noticed that during the bootup, the Updating Shared Library
-
Record video no sound! <Edited by Host>
-
Hi Folks, I need help in deciphering this error message. I am trying to connect via the browser to a simple form in Developer SErver and I get this error in the Applet Window: FRM-99999: An unexpected error occurred. Details... Java Exception: sun.ap
-
hi experts, i m developing a bdc for valuation class and type using tc 'mm01' here i m facing one problem for some particulars materials the sequence of accounting views getting change automatically while executing the program , cud u