OperationNotSupportedException in Naming Listener
I tried to connect to active directory and set up a listener.
EventContext src = (EventContext)(new InitialContext(env).lookup("cn=Users,dc=mydomain,dc=com"));
NamingListener listener = new SampleNCListener("nc1");
src.addNamingListener("", EventContext.ONELEVEL_SCOPE,listener);
I obtained the code of SampleNCListener from Event Listeners .
It throws an error saying :
nc1>>> SampleNCListener got an exception
javax.naming.OperationNotSupportedException: [LDAP: error code 12 - 00000057: Ld
apErr: DSID-0C090747, comment: Error processing control, data 0, v1771 ]; remain
ing name ''
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3147)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:3033)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2840)
at com.sun.jndi.ldap.LdapNamingEnumeration.getNextBatch(LdapNamingEnumer
ation.java:147)
at com.sun.jndi.ldap.LdapNamingEnumeration.hasMoreImpl(LdapNamingEnumera
tion.java:216)
at com.sun.jndi.ldap.LdapNamingEnumeration.hasMore(LdapNamingEnumeration
.java:189)
at com.sun.jndi.ldap.NamingEventNotifier.run(NamingEventNotifier.java:13
4)
at java.lang.Thread.run(Thread.java:722)
Please help me on how to solve this issue.
D. Anand Kumar
That code didn't throw that exception. Post the code that did throw it.
Similar Messages
-
Unregister service name from listener
Hi,
I have a default listener (named LISTENER, port 1521) and a database with SID=ORCL. The database automatically registers with the listener, the output of "lsnrctl status" is:
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orcl_XPT" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
And the value of the service_names parameter is:
SQL> show parameter service_names
NAME TYPE VALUE
service_names string orclNow I'd like to prevent clients to connect to the database using the service name 'ORCL', so I changed the service_names init parameter:
SQL> alter system set service_names=testdb;
System altered.
Then I restarted the listener. The "problem" is that the database registers with the listener also the 'ORCL' service name:
Service "TESTDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orcl_XPT" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
Is it possible to somehow prevent the database from registering the service name ORCL with the listener?
If you're wondering why I'm asking that, it's because this database is a duplicated production database (on a different host), and I'd like to prevent the possibility of mistakenly connecting to the production DB. I'm aware it would be better if I change the database's SID altogether, but currently that's not possible.
Thank you in advance for any answer.
Regards,
JureHi coskan,
Thanks for the answer.
Jut a question at the beginning. Doesn't the SID_LIST_listener_name parameter define which databases the listener listens to (and not the single services the database offers)? As I understand, I can prevent automatic registration of a database into the listener, but not selectively allow only some services the database offers? Maybe I'm completely wrong, so please correct me if it's so :-)
As you suggetsed I tried the following:
listener.ora:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = ORCL)
(ORACLE_HOME = E:\oracle\product\10.2.0\db_4)
tnsnames.ora:
LISTENER=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522))
SQL> show parameter local_listener
NAME TYPE VALUE
local_listener string LISTENERlsnrctl status:
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1522)))
Services Summary...
Service "ORCL" has 1 instance(s).
Instance "ORCL", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
So, now only the service ORCL is registred, although the init parameter service_names=TESTDB. I can connect using ORCL as the service_name in the connection string, but not using TESTDB.
Regards,
Jure -
Hi ,
I have three Oracle DB instance running on AIX machine with default listener named "Listener".
I want enable listener tracing for one of DB instance for tracing connection time-out error in Prod env.
Any suggestions how to enable for single instance only.
Thanks .977220 wrote:
Hi Sb92075 ,
It throws "ORA-03135: connection lost contact” in alert.log file and it is not case with any specific user or specific time ...Normally it works OK but in-between any time it throws connection timeout error So wanted to investigate further .
IMO, ORA-03135 is different from "timeout"
03135, 00000, "connection lost contact"
// *Cause: 1) Server unexpectedly terminated or was forced to terminate.
// 2) Server timed out the connection.
// *Action: 1) Check if the server session was terminated.
// 2) Check if the timeout parameters are set properly in sqlnet.ora.
Listener.log file doesn't have any info about particular time-stamp when connection was not successful.Listener is only involved briefly, when client makes initial request to connect to the DB.
After the DB & client establish direct packet exchange then the listener is no longer involved at all.
>
>
So if not possible for instance than need to enable for all instance .Was concern about amount of log it will generated .
Thanks for your response.can you isolate ORA-03135 to specific client system? -
Oracle 11g Express: listener/DB stopped regularly ...
Dear all,
we currently use oracle DB 11g express edition on Win XP in order to do nigthly test of our product accessing the DB via a JDBC driver. After two successful nightly test communicating via JDBC doesn't work anymore due to stopped DB listener. The first error message I got was "ORA-12518, TNS:listener could not hand off client connection", I fixed it via settings up maximum processes to 450, then I got the next error message where I don't know what to do "ORA-12560: TNS:protocol adapter error". Please can you help me since I need a stable DB for nightly continuous integration tests.
Thank you in advance, Andreas.Bumping processes would seem to be a symptom fix, not a problem fix- if a session can't get a connection because available processes are at the max, must be some client programs with a bug/glitch where they aren't letting go of their session(s).
Eg. maybe hitting an exception block, and the code never sees a "close connection" call? Until that bug (the problem) gets fixed, increasing process limits is not going to be much of a fix. Just a guess, can't know for sure without seeing the code.
Anyways, for the ora-12560 something may have gone astray (or changed?) with host network adapter settings- hostname change? IP address change? IPv6? Is the host a DHCP client? Is there more than one NIC on the host? Do both the hostname and its IP address(es) resolve correctly? (... ipconfig /all ... `hostname` ... nslookup <hostname> ... nslookup <n.n.n.n> ...)
One item to try, stop the listener and move the listener.ora file "out of the way" (eg move listener.ora listener.ora.bk) as others have suggested here before. Any RDBMS install has its default listener, named LISTENER, and if all the default settings are OK for your setup then using that should work fine. Double checking that the listener service still shows in the services applet would also be advisable, only takes a moment ... Start/Run/services.msc ...
Another possible fix for ora-12560 is setting ...HOST=0.0.0.0... in listener.ora, that is the "any IPv4" address setting, but that is advisable only if the host has one NIC, otherwise the instance would be accepting connections at an address you might not want made available to remote clients. -
Services don't register with static listener
HI, no matter what configurations I do the static listener shows no services. Can you help me? Here is my listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME=ELLISON9)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME=ELLISON9)
LISTENER11G =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ora1)(PORT = 1522))
ADR_BASE_LISTENER = /u01/app/oracle
My tnsnames.ora:
ELLISON9 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ora1)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = ELLISON9)
And my parameters in the database are:
service_names=ELLISON9
local_listener=' ';
STATUS of the LISTENER
Alias LISTENER11G
Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date 11-JUN-2013 10:07:09
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/11.2.0/dbhome_1/log/diag/tnslsnr/ora1/listener11g/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora1)(PORT=1522)))
The listener supports no services
The command completed successfully
[oracle@ora1 admin]$ sqlplus sys/oracle@ora1:1522/ELLISON9 as sysdba
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptorXerXi wrote:
Isn't the local_listener parameter creating dynamic listener?
I already had a listener named LISTENER from another home and not to confuse both I decided to name it something else. But come to think of it, it wouldn't have been a problem to have 2 listeners with same names but different homes, correct?
No, no, and no.
No. The local_listener parameter doesn't create anything. It tells the database where to find the listener so that it can register itself with the listener. And it is only needed if the listener is not using the default port of 1521.
see: [url http://edstevensdba.wordpress.com/2011/07/30/exploring-the-local_listener-parameter/] exploring-the-local_listener-parameter [/url]
No, there is no such this as a 'dynamic listener'. There is dynamic registration with a listener. But there is no 'dynamic listener'. A listener is a listener is a listener.
I don't know if you can have two listeners with the same name running from two different homes or not. I've never been so insane as to try it. If it *is* possible, it would certainly be the most difficult to maintain multi-listener setup I can imagine.
One more time. Repeat after me. "One single listener with the default name of LISTENER and using the default port of 1521 was designed to support multiple databases of multiple versions running from multiple homes. Anything else is needless complexity."
Please tell us again what problem you thought you were solving by having multiple listeners ...
Message was edited by: EdStevens -
Listener Credentials in OMS 12 show password in cleartext
Hello,
when you create a named listener credential in OMS12, the password is showed in cleartext on the Named Credentials overview page under "target username" (this is with BP1 applied).
Might want to fix that ...Hi,
I have raised a bug to track this issue (bug:14359588).
Regards, Mark. -
TNS:protocol adapter error while starting Listener created by Oracle SES11.1.2.2 Setup
I am trying to install Oracle Secure Enterprise Search 11.1.2.2 on Windows 7 64-Bit Enterprise Edition.
The machine has Oracle Client installed on it. Loopback adapter was configured.
The setup created a Listener named LISTENER and SID is ASUSES.
I am getting the following error when trying to start the Listener.
LSNRCTL> start LISTENER
TNS-01106: Listener using listener name LISTENER has already been started
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=01HW536484.India.TCS.com
)(PORT=1521)))
TNS-12537: TNS:connection closed
TNS-12560: TNS:protocol adapter error
TNS-00507: Connection closed
Content of listener.ora
# listener.ora Network Configuration File: D:\ses\seshome\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 01HW536484.India.TCS.com)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
Content of tnsnames.ora
# tnsnames.ora Network Configuration File: D:\ses\seshome\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ASUSES =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 01HW536484.India.TCS.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ASUSES.01HW536484.India.TCS.com)
Content of sqlnet.ora
# sqlnet.ora Network Configuration File: D:\ses\seshome\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
tcp.invited_nodes=(01HW536484,127.0.0.1)
tcp.validnode_checking=yes
sqlnet.expire_time=10
tcp.invited_nodes=(01HW536484,127.0.0.1)
tcp.validnode_checking=yes
sqlnet.expire_time=10
Kindly let me know what should be done.i have done that. i copied the tnsnames.ora, sqlnet.ora, listener.ora files from the c:>oracle-home\network\admin folder into oracle_devhome\network\admin folder. i have also set the environment variable oracle_sid=skoolman. skoolman is my sid as you can see on the tnsnames.ora. but the error massage still comes up as soon as i run forms from the forms builder environment.
but as i said i am able to connect to the database with my user name and pass word from within the forms builder environment to access my tables and create data blocks etc but as soon as i run the form through internet explorer the forms servlet boots up and the error massage ora-12560 tns protocol adapter error pops up.
thanks guys for your heip. please i need more solutions -
Hi all,
Our unit have two(2) dev group but shared 1 database server.
We installed 2 development database on the common DEV machine namely DEV1 and DEV2.
This is so bacause each unit wanted to be indepent on each his database. Each one do his thing w/o interfering the others.
The problem is I am not so good in configuring the listener. The DEV1 which is first installed uses the generic named LISTENER.
And when the second database DEV2 is installed it rides on the same LISTENER.
How do I create a separate listener for DEV2?
Thanks a lot843228 wrote:
Hi all,
Our unit have two(2) dev group but shared 1 database server.
We installed 2 development database on the common DEV machine namely DEV1 and DEV2.
This is so bacause each unit wanted to be indepent on each his database. Each one do his thing w/o interfering the others.
The problem is I am not so good in configuring the listener. The DEV1 which is first installed uses the generic named LISTENER.
And when the second database DEV2 is installed it rides on the same LISTENER.
How do I create a separate listener for DEV2?
Thanks a lotOne listener, with the default name of LISTENER, running from one oracle home, listening on a single port, will serve multiple database instances of multiple versions running from multiple homes. It is an unnecessary complexity to try to have multiple listeners or to name the listener as if it belongs to a particular database. That would be like the telephone company building a separate switchboard for each customer. -
Error while creating DBConsole -- Error configuring central management
Dear All,
MY DB Oracle 11gR1 on Linux is running fine, however there is a problem in Oracle Enterprise Manager Console.
I dropped and re-create dbconsole using:
emca -config all db -repos create
These are the messages I got after creating it.
Feb 10, 2010 10:31:26 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Feb 10, 2010 10:41:28 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Feb 10, 2010 10:41:41 AM oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Uploading configuration data to EM repository (this may take a while) ...
Feb 10, 2010 10:43:48 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Uploaded configuration data successfully
Feb 10, 2010 10:43:53 AM oracle.sysman.emcp.util.CentralAgentUtil registerWithCentralAgents
INFO: Registering target(s) with central agent(s) (this may take a while)...
Feb 10, 2010 10:43:57 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /Oracle/app/oracle/product/11.1.0/db_1/bin/emctl config agent addcentralagent /Oracle/app/oracle/product/11.1.0/db_1 /Oracle/app/oracle/product/11.1.0/db_1
Feb 10, 2010 10:43:57 AM oracle.sysman.emcp.EMAgentConfig performConfiguration
WARNING: Error registering database targets with the central agent(s).
Feb 10, 2010 10:43:57 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error configuring central management. This target will not be centrally managed
Refer to the log file at /Oracle/app/oracle/cfgtoollogs/emca/bssdevpl/emca_2010_02_10_10_25_26.log for more details.
Could not complete the configuration. Refer to the log file at /Oracle/app/oracle/cfgtoollogs/emca/bssdevpl/emca_2010_02_10_10_25_26.log for more details.
If anyone can help me getting through this error and creating dbconsole.
Thanks,
ImranCONFIG: isLocalNodeDone: T localNode: null
10:31:26 oracle.sysman.emcp.EMDBPreConfig copyAgentTimeStampFile
CONFIG: File: /path/bss.com_bssdevpl/sysman/emd/agntstmp.txt:bss.com does not exists.
10:31:26 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: bssdevpl, oracleHome: /path, and user: SYS
10:31:26 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
10:31:26 oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: Spooling to /Oracle/app/oracle/cfgtoollogs/emca/bssdevpl/emca_repos_create_2010_02_10_10_31_26.log
10:31:26 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
10:41:28 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
10:41:28 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter EMAIL_ADDRESS.
10:41:28 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_NAME.
10:41:28 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_SENDER_NAME.
10:41:28 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_SENDER_ADDR.
10:41:28 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: bssdevpl, oracleHome: /path, and user: SYS
10:41:29 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
10:41:29 oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
10:41:29 oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully unlocked relevant accounts
10:41:29 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: bssdevpl, oracleHome: /path, and user: SYSMAN
10:41:29 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
10:41:36 oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Finished executing emreposoutofbox.sql
10:41:36 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: bssdevpl, oracleHome: /path, and user: SYSMAN
10:41:38 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
10:41:38 oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Submitting dbms job: /path/sysman/admin/emdrep/sql/core/latest/admin/admin_submit_dbms_jobs.sql
10:41:38 oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Successfully submitted dbms job
10:41:38 oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
CONFIG: Unlocking mgmt view user account
10:41:38 oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
CONFIG: view user sql: declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end;
10:41:38 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /path/sysman/admin/scripts/emca/emcaDbUtil /path/perl/lib:/path/perl/lib/site_perl:/path/sysman/admin/scripts:/path/bin: /path/perl/bin/perl /path/sysman/admin/scripts/emca/emcaDbUtil.pl /path bssdevpl SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD
10:41:41 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
10:41:41 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of /path/sysman/admin/scripts/emca/emcaDbUtil /path/perl/lib:/path/perl/lib/site_perl:/path/sysman/admin/scripts:/path/bin: /path/perl/bin/perl /path/sysman/admin/scripts/emca/emcaDbUtil.pl /path bssdevpl SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD completed successfully
10:41:41 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Arguments passed /path bssdevpl SYS SYSDBA declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD
Connecting to database bssdevpl in home /path with user "SYS" role "SYSDBA".
connected to database.
sql to execute declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end;
noOfParams to bind: 1.
sql execute successfully.
10:41:41 oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
CONFIG: Unlocked mgmt_view account
10:41:41 oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully unlocked mgmt_view account
10:41:41 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:41:41 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: bssdevpl, oracleHome: /path, and user: SYS
10:41:41 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
10:41:41 oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: Passed listener validation check.Listener is up and running.
10:41:41 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:41:41 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Uploading configuration data to EM repository (this may take a while) ...
10:43:48 oracle.sysman.emcp.EMReposConfig invoke
INFO: Uploaded configuration data successfully
10:43:48 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:48 oracle.sysman.emcp.EMDBCConfig updateEmomsProps
CONFIG: Updating file /path/sysman/config/emoms.properties ...
10:43:48 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:48 oracle.sysman.emcp.util.FileUtil _copyFile
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_SENDER_NAME.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter EMAIL_ADDRESS.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MAIL_SERVER_NAME.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:49 oracle.sysman.emcp.EMAgentConfig updateEmdProps
CONFIG: Updating file /path/sysman/config/emd.properties ...
10:43:49 oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /path/sysman/config/emd.properties.emca to /path/sysman/config/emd.properties
10:43:49 oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /path/sysman/config/emd.properties.emca.util.tmp to /path/sysman/config/emd.properties
10:43:49 oracle.sysman.emcp.EMAgentConfig updateAgentConfigFiles
CONFIG: Updating file /path/sysman/config/emd.properties ...
10:43:49 oracle.sysman.emcp.EMAgentConfig updateTargets
CONFIG: value for use102tgt: F
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER_OH.
10:43:49 oracle.sysman.emcp.ParamsManager getListenerHome
CONFIG: LISTENER_OH not set. Using ORACLE_HOME as listener's home.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER_OH.
10:43:49 oracle.sysman.emcp.ParamsManager getListenerHome
CONFIG: LISTENER_OH not set. Using ORACLE_HOME as listener's home.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER_OH.
10:43:49 oracle.sysman.emcp.ParamsManager getListenerHome
CONFIG: LISTENER_OH not set. Using ORACLE_HOME as listener's home.
10:43:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:50 oracle.sysman.emcp.ParamsManager getLocalListener
CONFIG: Found listener named: LISTENER
10:43:50 oracle.sysman.emcp.EMAgentConfig updateAgentConfigFiles
CONFIG: Updating file /path/sysman/emd/targets.xml ...
10:43:50 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:50 oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
CONFIG: Local host name: bss.com
10:43:50 oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: T localNode: null
10:43:50 oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'DISPLAY' is '', discarding the same
10:43:50 oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'TZ' is '', discarding the same
10:43:50 oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'ORACLE_HOSTNAME' is '', discarding the same
10:43:50 oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [CLASSPATH=/path/jlib/emca.jar:/path/jlib/srvm.jar:/path/jlib/srvmasm.jar:/path/jlib/emConfigInstall.jar:/path/jlib/ldapjclnt11.jar:/path/jlib/ldap.jar:/path/jlib/share.jar:/path/jlib/srvmhas.jar:/path/jlib/netcfg.jar:/path/jlib/http_client.jar:/path/lib/http_client.jar:/path/lib/xmlparserv2.jar:/path/assistants/jlib/assistantsCommon.jar:/path/sysman/jlib/emCORE.jar:/path/sysman/jlib/emagentSDK.jar:/path/oui/jlib/OraInstaller.jar:/path/oui/jlib/OraPrereq.jar:/path/inventory/prereqs/oui/OraPrereqChecks.jar:/path/oui/jlib/OraPrereqChecks.jar:, DYLD_LIBRARY_PATH=/path/lib32:/path/lib:/path/perl/lib, G_BROKEN_FILENAMES=1, HISTSIZE=1000, HOME=/home/oracle, HOSTNAME=bss-ora-dev, INPUTRC=/etc/inputrc, KDEDIR=/usr, LANG=en_US.UTF-8, LD_LIBRARY_PATH=/path/jdk/jre/lib/i386/client:/path/jdk/jre/lib/i386:/path/jdk/jre/../lib/i386:/path/lib32:/path/lib:/path/perl/lib, LESSOPEN=|/usr/bin/lesspipe.sh %s, LIBPATH=/path/lib32:/path/lib:/path/perl/lib, LOGNAME=oracle, LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:, MAIL=/var/spool/mail/oracle, NEED_EXIT_CODE=1, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, ORACLE_HOME=/path, ORACLE_SID=bssdevpl, PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/path/bin, PWD=/home/oracle, SHELL=/bin/bash, SHLIB_PATH=/path/lib32:/path/lib:/path/perl/lib, SHLVL=2, SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass, TERM=xterm, USER=oracle, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, _=/path/jdk/jre/bin/java]
10:43:50 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /path/bin/emctl deploy dbconsole /path/bss.com_bssdevpl bss.com:3938 bss.com bssdevpl
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of /path/bin/emctl deploy dbconsole /path/bss.com_bssdevpl bss.com:3938 bss.com bssdevpl completed successfully
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Creating shared install...
Source location: /path
Destination (shared install) : /path/bss.com_bssdevpl
DeployMode : dbconsole
Creating directories...
Setting console properties ...
Setting log and trace files locations for Console ...
Setting log and trace files locations for Agent ...
10:43:53 oracle.sysman.emcp.EMAgentConfig updateDBControlPort
CONFIG: Setting https port as: -1
10:43:53 oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /path/bss.com_bssdevpl/sysman/config/emoms.properties.emca.util.tmp to /path/bss.com_bssdevpl/sysman/config/emoms.properties
10:43:53 oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /path/bss.com_bssdevpl/sysman/config/emd.properties.emca.util.tmp to /path/bss.com_bssdevpl/sysman/config/emd.properties
10:43:53 oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /path/bss.com_bssdevpl/sysman/config/emd.properties.emca.util.tmp to /path/bss.com_bssdevpl/sysman/config/emd.properties
10:43:53 oracle.sysman.emcp.EMAgentConfig getCustomTargetName
CONFIG: targetsXML exists: /path/sysman/emd/targets.xml
10:43:53 oracle.sysman.emcp.EMAgentConfig getCustomTargetName
CONFIG: customTarget for oracle_database on node bss.com sid bssdevpl : bssdevpl
10:43:53 oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CUSTOM_ORACLE_DB_TARGET value: bssdevpl
10:43:53 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER.
10:43:53 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER_OH.
10:43:53 oracle.sysman.emcp.ParamsManager getListenerHome
CONFIG: LISTENER_OH not set. Using ORACLE_HOME as listener's home.
10:43:53 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER_OH.
10:43:53 oracle.sysman.emcp.ParamsManager getListenerHome
CONFIG: LISTENER_OH not set. Using ORACLE_HOME as listener's home.
10:43:53 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
10:43:53 oracle.sysman.emcp.ParamsManager getLocalListener
CONFIG: Found listener named: LISTENER
10:43:53 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter LISTENER_OH.
10:43:53 oracle.sysman.emcp.ParamsManager getListenerHome
CONFIG: LISTENER_OH not set. Using ORACLE_HOME as listener's home.
10:43:53 oracle.sysman.emcp.EMAgentConfig getCustomTargetName
CONFIG: targetsXML exists: /path/sysman/emd/targets.xml
10:43:53 oracle.sysman.emcp.EMAgentConfig getCustomTargetName
CONFIG: customTarget for oracle_listener on node bss.com sid null : LISTENER_bss.com
10:43:53 oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: CUSTOM_LSNR_TARGET value: LISTENER_bss.com
10:43:53 oracle.sysman.emcp.util.PlatformInterface getEnvProps
CONFIG: Returning env array from cache
10:43:53 oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [CLASSPATH=/path/jlib/emca.jar:/path/jlib/srvm.jar:/path/jlib/srvmasm.jar:/path/jlib/emConfigInstall.jar:/path/jlib/ldapjclnt11.jar:/path/jlib/ldap.jar:/path/jlib/share.jar:/path/jlib/srvmhas.jar:/path/jlib/netcfg.jar:/path/jlib/http_client.jar:/path/lib/http_client.jar:/path/lib/xmlparserv2.jar:/path/assistants/jlib/assistantsCommon.jar:/path/sysman/jlib/emCORE.jar:/path/sysman/jlib/emagentSDK.jar:/path/oui/jlib/OraInstaller.jar:/path/oui/jlib/OraPrereq.jar:/path/inventory/prereqs/oui/OraPrereqChecks.jar:/path/oui/jlib/OraPrereqChecks.jar:, DYLD_LIBRARY_PATH=/path/lib32:/path/lib:/path/perl/lib, G_BROKEN_FILENAMES=1, HISTSIZE=1000, HOME=/home/oracle, HOSTNAME=bss-ora-dev, INPUTRC=/etc/inputrc, KDEDIR=/usr, LANG=en_US.UTF-8, LD_LIBRARY_PATH=/path/lib32:/path/lib:/path/perl/lib:null, LESSOPEN=|/usr/bin/lesspipe.sh %s, LIBPATH=/path/lib32:/path/lib:/path/perl/lib, LOGNAME=oracle, LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:, MAIL=/var/spool/mail/oracle, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, ORACLE_HOME=/path, ORACLE_SID=bssdevpl, PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/path/bin, PERL5LIB=/path/perl/lib:/path/perl/lib/site_perl:/path/sysman/admin/scripts:/path/bin:, PWD=/home/oracle, SHELL=/bin/bash, SHLIB_PATH=/path/lib32:/path/lib:/path/perl/lib, SHLVL=2, SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass, TERM=xterm, USER=oracle, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, _=/path/jdk/jre/bin/java]
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /path/perl/bin/perl /path/bin/targetdeploy.pl -d bssdevpl -n LISTENER_bss.com /path/bss.com_bssdevpl bss.com bssdevpl
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 0
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Execution of /path/perl/bin/perl /path/bin/targetdeploy.pl -d bssdevpl -n LISTENER_bss.com /path/bss.com_bssdevpl bss.com bssdevpl completed successfully
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Creating targets.xml in state directories...
Source location: /path
Destination : /path/bss.com_bssdevpl
Creating directories...
Creating targets.xml...
Done.
10:43:53 oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /path/oraInst.loc to /path/bss.com_bssdevpl/oraInst.loc
10:43:53 oracle.sysman.emcp.EMAgentConfig createAgentTimeStampFile
CONFIG: Creating agntstmp.txt file. oh: /path stateDir: /path/bss.com_bssdevpl host: bss.com
10:43:53 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
10:43:53 oracle.sysman.emcp.EMAgentConfig createAgentTimeStampFile
CONFIG: File: /path/sysman/emd/agntstmp.txt.bssdevpl does not exists
10:43:53 oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
CONFIG: Successfully deployed state dirs for bss.com
10:43:53 oracle.sysman.emcp.EMAgentConfig performConfiguration
CONFIG: Successfully updated agent config files
10:43:53 oracle.sysman.emcp.util.CentralAgentUtil registerWithCentralAgents
INFO: Registering target(s) with central agent(s) (this may take a while)...
10:43:53 oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'DISPLAY' is '', discarding the same
10:43:53 oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'TZ' is '', discarding the same
10:43:53 oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'ORACLE_HOSTNAME' is '', discarding the same
10:43:53 oracle.sysman.emcp.util.PlatformInterface getEnvProps
CONFIG: Returning env array from cache
10:43:53 oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [CLASSPATH=/path/jlib/emca.jar:/path/jlib/srvm.jar:/path/jlib/srvmasm.jar:/path/jlib/emConfigInstall.jar:/path/jlib/ldapjclnt11.jar:/path/jlib/ldap.jar:/path/jlib/share.jar:/path/jlib/srvmhas.jar:/path/jlib/netcfg.jar:/path/jlib/http_client.jar:/path/lib/http_client.jar:/path/lib/xmlparserv2.jar:/path/assistants/jlib/assistantsCommon.jar:/path/sysman/jlib/emCORE.jar:/path/sysman/jlib/emagentSDK.jar:/path/oui/jlib/OraInstaller.jar:/path/oui/jlib/OraPrereq.jar:/path/inventory/prereqs/oui/OraPrereqChecks.jar:/path/oui/jlib/OraPrereqChecks.jar:, DYLD_LIBRARY_PATH=/path/lib32:/path/lib:/path/perl/lib, G_BROKEN_FILENAMES=1, HISTSIZE=1000, HOME=/home/oracle, HOSTNAME=bss-ora-dev, INPUTRC=/etc/inputrc, KDEDIR=/usr, LANG=en_US.UTF-8, LD_LIBRARY_PATH=/path/jdk/jre/lib/i386/client:/path/jdk/jre/lib/i386:/path/jdk/jre/../lib/i386:/path/lib32:/path/lib:/path/perl/lib, LESSOPEN=|/usr/bin/lesspipe.sh %s, LIBPATH=/path/lib32:/path/lib:/path/perl/lib, LOGNAME=oracle, LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:, MAIL=/var/spool/mail/oracle, NEED_EXIT_CODE=1, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, ORACLE_HOME=/path, ORACLE_SID=bssdevpl, PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/path/bin, PWD=/home/oracle, SHELL=/bin/bash, SHLIB_PATH=/path/lib32:/path/lib:/path/perl/lib, SHLVL=2, SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass, TERM=xterm, USER=oracle, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, _=/path/jdk/jre/bin/java]
10:43:53 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /path/bin/emctl config agent addcentralagent /path /path
10:43:57 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 1
10:43:57 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
0 [main] ERROR emSDK.config - Warning: one of following could not be found:/path/bin/emtgtctl or /path/bss.com_bssdevpl/bin/emtgtctl
7 [main] ERROR emSDK.config - oracle.sysman.emSDK.conf.CentralHomeAdditionException: emtgtctl could not be found in the bin directory of either the local home at /path or the central home at /path/bss.com_bssdevpl
oracle.sysman.emSDK.conf.CentralHomeAdditionException: emtgtctl could not be found in the bin directory of either the local home at /path or the central home at /path/bss.com_bssdevpl
at oracle.sysman.emSDK.conf.TargetInstaller.addCentralAgentHome(TargetInstaller.java:1931)
at oracle.sysman.emSDK.conf.TargetInstaller.main(TargetInstaller.java:3167)
10:43:57 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: emtgtctl could not be found in the bin directory of either the local home at /path or the central home at /path/bss.com_bssdevpl
10:43:57 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /path/bin/emctl config agent addcentralagent /path /path
10:43:57 oracle.sysman.emcp.util.CentralAgentUtil registerWithCentralAgents
CONFIG: Error registering with /path
10:43:57 oracle.sysman.emcp.EMAgentConfig performConfiguration
WARNING: Error registering database targets with the central agent(s).
10:43:57 oracle.sysman.emcp.EMConfig perform
SEVERE: Error configuring central management. This target will not be centrally managed
Refer to the log file at /Oracle/app/oracle/cfgtoollogs/emca/bssdevpl/emca_2010_02_10_10_25_26.log for more details.
10:43:57 oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error configuring central management. This target will not be centrally managed
at oracle.sysman.emcp.EMAgentConfig.performConfiguration(EMAgentConfig.java:1303)
at oracle.sysman.emcp.EMAgentConfig.invoke(EMAgentConfig.java:239)
at oracle.sysman.emcp.EMAgentConfig.invoke(EMAgentConfig.java:217)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:225)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:534)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1214)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:518)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:467) -
Re:ORA-12545 error (host target)
Can anyone shed some light on this... I have just installed red hat linux 9 and have been trying install Oracle 9.2 (i have followed many instructions from sites and have done all the export cmds etc...). But i keep getting a ORA-12545 error when trying to connect (no target host found)i have looked at the listener.ora file and cant seem to see anything wrong. What else can i do to solve my problem??? Ian.
There are several issues that you have to check out.
ORA-12545: TNS:name lookup failure
Cause: The listener on the remote node cannot be contacted.
Action: Perform these steps:
Verify that the ADDRESS in the tnsnames.ora file and the listener.ora file is correct.
Verify that the listener on the remote node has been started. Enter:
lsnrctl
LSNRCTL> STATUS [listener_name]
listener_name is the name of the listener defined in the listener.ora file. It is not necessary to identify the listener if you are using the default listener, named LISTENER.
If the output indicates the listener is not running, try starting it with the command:
LSNRCTL> START [listener_name]
First than nothing :
1.- Can you get connection locally in the Server ?
Joel P�rez -
How to create a database link to SQL Server from a RAC environment
We have a 4 node RAC running 11.2.0.3 binaries on 64-bit linux.
Grid owns the listener named listener.
Oracle owns the database.Thanks all! But I tried to configure and I am getting
TNS-01201: Listener cannot find executable /u01/app/oracle/product/11.2.0.3/dbhome_1/bin/InfoEdb10 for SID InfoEdb10
Listener failed to start. See the error message(s) above...
So! What I did was
1. Configure the odbc from the OS (only one node) and create the DSN and its odbc files. connectivity works from Operating Systems.
2. Create the listener entry (under GRID) user.
3. Create the remotedb.ora file under $ORACLE_HOME/hs/admin
--- Here is listener.ora file
LISTENER_NODE1_TG =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = devrac-a-01-vip.cssd.pitt.edu)(PORT = 1549)(IP = FIRST))
(ADDRESS = (PROTOCOL = TCP)(HOST = devrac-a-01.cssd.pitt.edu)(PORT = 1549)(IP = FIRST))
SID_LIST_LISTENER_NODE1_TG =
(SID_LIST =
(SID_DESC =
(SID_NAME = InfoEdb10)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0.3/dbhome_1)
(ENVS = "LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0.3/dbhome_1/lib")
(PROGRAM = InfoEdb10)
any help is appreciated -
Logs not applying on Standby Database
I am afraid I am back.
I now have a primary database and a standby database and logs are being shipped but not applied. Done some research and I have got to the point where in my alert log I find the following when I try to start MRP:
Fri Jun 29 15:03:40 2012
alter database recover managed standby database disconnect from session
Attempt to start background Managed Standby Recovery process (SAPDS)
Fri Jun 29 15:03:40 2012
MRP0 started with pid=29, OS id=23272
MRP0: Background Managed Standby Recovery process started (SAPDS)
started logmerger process
Fri Jun 29 15:03:45 2012
Managed Standby Recovery not using Real Time Apply
Read of datafile '/var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf' (fno 2) header failed with ORA-01206
Rereading datafile 2 header failed with ORA-01206
MRP0: Background Media Recovery terminated with error 1110
Errors in file /var/hpsrp/drforp03/oradata/u04/SAPDS/admin/diag/rdbms/drfsapds/SAPDS/trace/SAPDS_pr00_23308.trc:
ORA-01110: data file 2: '/var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf'
ORA-01122: database file 2 failed verification check
ORA-01110: data file 2: '/var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf'
ORA-01206: file is not part of this database - wrong database id
Recovery Slave PR00 previously exited with exception 1110
Errors in file /var/hpsrp/drforp03/oradata/u04/SAPDS/admin/diag/rdbms/drfsapds/SAPDS/trace/SAPDS_mrp0_23272.trc:
ORA-01110: data file 2: '/var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf'
ORA-01122: database file 2 failed verification check
ORA-01110: data file 2: '/var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf'
ORA-01206: file is not part of this database - wrong database id
MRP0: Background Media Recovery process shutdown (SAPDS)
Completed: alter database recover managed standby database disconnect from session
My question therefore is how can I get out of this and get my logs to apply on standby?Hello again;
Do you think if I tried to repeat the duplicate?
Yes I think you should do this.
Give me a few minutes and I will review my Word document and provide a step by step overview here as insurance.
I always cleanup the standby before trying another dup
OVERVIEW
Step 1 - Password file fro standby - Copy from primary and rename
Step 2 - Directory Structure on the remote server - Make sure noting is missing
Step 3 - Oracle Net Setup - entry for the CLONE in your TNSNAMES.ORA on both servers
Step 4 - SID_LIST_LISTENER addition ( assumes listener named LISTENER )
Step 5 - Timeouts set in listener.ora and sqlnet.ora Both Servers
Step 6 - Initialization Parameter File for the Auxiliary Instance
Step 7 - Set SID for Auxiliary Instance
Step 8 - Create an SPFILE for the new database by using a pfile with the INIT settings
Step 9 - Shutdown and startup nomount on new Spfile ( Auxiliary Instance )
Step 10 - Start RMAN and run the DUPLICATE Command
SID_LIST_LISTENER Example from mine
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
(PROGRAM = extproc)
(SID_DESC =
(global_dbname = CLONE.hostname)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
(sid_name = CLONE)
Prevent Timeouts
Add these to both servers
To listener.ora
INBOUND_CONNECT_TIMEOUT_ = 120
To sqlnet.ora
SQLNET.INBOUND_CONNECT_TIMEOUT = 120
Then stop and start the listener.
RMAN
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
Connect should return something like this
connected to target database: RECOVER9 (DBID=3806912436)
connected to auxiliary database: CLONE (not mounted)RMAN>duplicate target database for standby from active database NOFILENAMECHECK;
INIT Extras
To avoid ORA-09925 make sure the PFILE has audit_file_dest and core_dump_dest set
Best Regards
mseberg
Edited by: mseberg on Jun 29, 2012 11:12 AM -
For the love of..... ok i've been trying load Oracle onto Linux9 (which is new to me) but will it work, not. I get a message of ora-12545 i've tried pretty much everything as far as i can tell. i@m no stranger to oracle but i am to linux....Please help me.
ORA-12545: TNS:name lookup failure
Cause: The listener on the remote node cannot be contacted.
Action: Perform these steps:
Verify that the ADDRESS in the tnsnames.ora file and the listener.ora file is correct.
Verify that the listener on the remote node has been started. Enter:
lsnrctl
LSNRCTL> STATUS [listener_name]
listener_name is the name of the listener defined in the listener.ora file. It is not necessary to identify the listener if you are using the default listener, named LISTENER.
If the output indicates the listener is not running, try starting it with the command:
LSNRCTL> START [listener_name]
Joel P�rez -
I am performing patching. The patching is going fine and there is nothing wrong in that. Actually we are patching the rac environment so all the environment has got min four nodes. Actually in the instructions we are asked to patch in each and every node. Consider the same db is running in all four nodes. My doubt here is as we patch only the oracle home gets patched right? so even if there are four nodes there will be only one shared oracle home so in this case why we need to patch each and every node? Please forgive if my question is stupid or if my understanding on the RAC is poor.
CKPT wrote:
Hi,
Even in RAC, database only will be in shared storage..
But ORACLE_HOME wil be installed in each server and its stand alone. It is not shared to all the nodes. So we need to apply on each node.
Hope you understood.Ya i can imagine that. But even in 10g we dont have the option of sharing the oracle software. I read something like this in a document.
Oracle 10g supports the sharing of the Oracle software by design – and in fact the named listener approach is the one taken for the situation in the example above.For 9i, the solution was to duplicate the Oracle software locally on each node – with the administrative overhead for tasks like patching increasing along with the number of nodes in the cluster. In order to lessen the burden with managing node-local Oracle software installations, the Oracle Installer transparently applies patches to all nodes in the cluster when the patching is applied to single node.
Although 10g is designed to support cluster-wide sharing of Oracle software, should you do it? Keep in mind that if you do so, the availability of the Oracle software becomes a potential single point of failure for the whole cluster compared to the local per-server installation approach.
We also have a grid environment where it is 16 node so according to you all these should be patched individually right? -
on a controller system with multiple network interface, is there a way to force OATS to use a specific one????
our scenario: The Controller system has NIC A and NIC B. All OATS agents are connected only to NIC B. Yet all OATS services (at ports 8088,9001, etc.) are for some reasons bound to just NIC A. We can ping and connect to those agents on NIC B but can't talk to the services on NIC A.
Ideas? Thanks for any inputs
-BaoThe WebLogic management console is the most likely place to look. I recall that you can change the ports here, so the NIC management may be possible as well. The JMSServer may be something to investigate after you are logged into the Console. Also the Console-> Servers->AdminServer(admin) has a general configuration setting named "Listen Address".
http://localhost:8088/console
username=oats and the password is the password you previously chose during the install.
Here is another suggestion from the WebLogic guide.
http://docs.oracle.com/cd/E21764_01/doc.1111/e14770/weblogic_server_issues.htm#CIHFHEGF
Edited by: glenn.s on May 10, 2012 2:55 PM
Maybe you are looking for
-
How to edit the top sites on safari 7.0.1
The edit button that usually sits at the bottom of the top sites page in safari no longer exists and i can't figure out how to change my top sites or the amount of top sites displayed.
-
How do I get photos from laptop to iPad, can't find photo tab
How do I get photos from lap top to iPad?
-
Kdm call to inusertemp failed - related to vfat partition type
i received the message kdm call to inusertemp failed (temp directories full?) check your installation upon a fresh arch/kdm installation after trying to change permissions to the /tmp directory # chmod -R 1777 /tmp i noticed that one file was still 7
-
Automatically populating Assignment Field from Customer Invoice Reference
Dear All I have a situation. I want when a customer invoice is posted the invoice reference mentioned in the Reference field of the document Header should automatically be populated into assignment field Can any one tell me how to get this situation
-
hi IN ARE 1 -duty values tab we have EXC. BASE field form where it picks the value PL suggest