Optimization: Convert Auto-sizing, Custom-sized and text-only Popups to hyperlinks

Can I get a better explanation than what's available in help. I  am deploying these multiscreen  profiles /outouts for apple, android, and desktop on the web. I need them to be fully functional and I am confused on why and when I would check or uncheck these two settings.
By the way - I do have popups - both image and text ...

I believe some older devices do not support popups so if you have users with such devices, a hyperlink opening another page will be better.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

  • How do you change the background color & font in a text-only popup?

    It has been ages since I did this and I can't seem to remember how. I tried to edit the style sheet but it only has options to change the text-only popup hotspot/link and I need to change the background color and font style within the popup itself. Tried Adobe's help but it had no answer for me. Any one out there know how to do this? I am running RoboHelp 7.

    By Popup do you mean a link that when clicked causes a separate topic to be displayed in a seperate window (popup) or Drop Down text?
    For Popups that are displayed in a new window then the font and colour is changed in the topic that is displayed. Simply open the topic and change colours / features as required
    If you are using drop down text and confusing this with a popup then the font and colour is changed when creating the drop down text. Right click the text and select Font to change colour etc.

  • Issues regarding Transporting the Custom codes and Text Elements

    I created a custom t-code and had some text elements for my ABAP program in DEV, I transported quality an it worked , but when i transport it production it did not transport the custom code and the text elements.  Can u guys give me steps to take for the custom code and the text to be transported sucessfully??

    Hi,
    Please check whether the Tcode and Text elements are assigned to the particular Transport Request number. If it is an enhancement that Tcode and Text elements might be there in QA before itself and so this is working. You need to add the TCode manually while transporting the request and transport it to QA and PRD.
    Thanks and Regards
    Sowmmya VB

  • Is it possible to have icons for the main forward/back toolbar line and text only for the bookmark line in the toolbars?

    In the customizing toolbars section it looks like you can either have icons and text, icons only or text only.
    I'd like to have the toolbar with the back/forward buttons, home button, etc. be icon only and the toolbar below, which is the bookmark bar to be text only. I don't see how to do this.
    Thanks.

    See:
    *Bookmarks Deiconizer: https://addons.mozilla.org/firefox/addon/bookmarks-deiconizer/

  • HT1358 I quite want my custom ringtones and text-tones to be a higher bitrate than 128kbps.

    Is this possible?

    Hi MadMac!
    I have exactly the same problem as you and I have also tried all solutions given on the InDesignSecrets page without result. The created pdf's look perfect but not when printed.
    I have started to think in another way. I have to buy a new printer soon and I'm looking for one of the cheaper color lasers for small offices. For testing I created an ugly designed A4-sized layout in InDesign with transparency in some text frames and exported it to a pdf which I brought to the reseller. The interesting thing is that it seems to depend on the printer if the YDB-syndome appers or not. All the three HP Color LaserJets I have looked at gives the syndome, but Xerox 6280n does not give the syndrome. I am not an expert at all regarding this, but my conclusion is that it has to do with the printers drivers. Xerox has true Adobe PostScript 3, ICC-profiles and Pantone-simulations and the HP's have emulations.The negative thing with Xerox 6280 is that the black/greyscale are printed approx 1/4mm wrong, compared with the other colors, which makes a mispas (or what it's called in english...).In offsetprint or digital press I have never got the syndrome, but there is not enough space on my desk to place an offsetpress even if I had the money.
    Have other here on the forum made the same or similar observations? And do someone know if the Canon LBP-5360 gives the YDB or not?Canon makes good inkjetprinters, so maybe they make good lasers as well.
    Johan

  • How do I convert my book cover pdf and text pdf to grayscale?

    1 ) How do I convert my photoshop book cover pdf to CMYK and remove all color and 2) How do I convert my Indesign text pdf file 'to grayscale for all black and whit images'?  

    Hello Mylenium, thank you for responding. My query has to do with the fact that it is already in pdf mode and it needs to be sent to the book printer. They will only accept the file in grayscale for the text matter file and the colored cover file needs to be in CMYK. I can't seem to correct the issue with everything internally that I've done. I currently have Acrobat XI and the tutorial creation files are in an earlier screen. So, the flow is not the same. I do not see the flow of conversion in the Ac. XI as they show in their creation file demands. Does this make sense?

  • How to keep custom ringtones and text tones in iOS 7

    ....

    Yup - looks like you can only copy the entire text from the Message app and the email app lets you 'select' or 'Select All'.

  • Auto Populate Drop Down and Text Fields from Other Drop Down and Text Fields

    Hi everyone
    I'm trying to pre populate a "Proposed Employment Status" drop down field with the selection from the "Current Employment Status" drop down field and allowing users to select another option if the proposed employment has changed. If it hasn't it would just remain as populated by the Current Employment Status" entry.
    I'm also trying to do this with text fields eg "Proposed Position Title" is populated with "Current Position Title". If the title changes in the bew employment arrangements users can enter it over the Proposed Position Title that is presented when the Current Position Title is entered.
    I can get it to work if the drop down or text field names are the same, but this doesnt solve the problem.
    Any ideas
    Regards,
    Michael

    Java is a full featured-language and you shouldn't have any problem doing the mathematics, etc.
    As far as the rest, Studio Creator is a relatively easy way to create the user interface that you describe. If supports drop-down selectable lists and standard form capabilities. A Web Application architecture would appear to be ideally suited to what you describe, and this is supported by SC. Be aware that this would require a server to serve the application to the client computer.
    If the server is a problem you could consider an applet that would be downloaded from a website, and then run entirely on the client computer. But the first approach is better.

  • Must turn off 3G to get phone and text

    I have been having problems with receiving calls and text's on my one week old 3GS. 4 out of 5 calls go right to voicemail. Some texts never come in. Also some outgoing texts lockup and don't go through. I went to AT&T and they gave me a new SIM card. That didn't help. Then they told me to reset my network settings...that didn't help. I find the only way to get consistent phone and text service is if I turn off 3G. Anybody else having this problem?

    Same thing was happening to me when I lived in Arizona. Calls and text only worked on edge. I went through 3 phones and 2 sim cards. signal would totally drop off from 5 bars to none, "3G or E" would go away for 20-30 seconds and come back. Every time it happened I would take a screen shot of the home screen. Shows date on the calendar icon, time at the top and signal. It got to the point where I was taking screen shots 4-5 times an hour. I had over 100 screen shots of signal dropoff and failed text sent.
    When I took the phone back to the Apple store they would replace it because under diagnosis it was internal resetting, 5-6 times a day. Every phone was doing it. Finally after calling applecare and AT&T 9 times. I got a call from AT&T regional telling me there was trouble with the tower in my area. He told me the Apple store had replaced 136 phones. No one knew even people working at the Apple store were replacing their phones. It took about a month until we were operational again, Apple Store stopped replacing phones and just told people to keep it on EDGE until it was fixed.
    This was on my 3G my 3G(S) has been flawless...

  • How to get the UIDRef of Text frame associated with hyperlink?

    Hi,
    I have a document which contains Text hyperlinks . I am able to get the number of hyperlinks present in document using "IHyperlinkTable" and text range to which hyperlink is associated using interface "IHyperlink".
    InterfacePtr<IHyperlink> hyperlink(tableDb, table->GetNthHyperlink(i), IID_IHYPERLINK);
    if(hyperlink)
           hyperlink->GetName(&sHyperlinkName); //sHyperlinkName is text to which hyperlink is associated
    now I need to find the UIDRef of Text frame with which hyperlink is associated.
    I can get the UIDRef of "Image frame" using interface "IHyperlinkPageItemSourceData".
    InterfacePtr<IHyperlinkPageItemSourceData> sourceHyperLink (tableDb, hyperlink->GetSourceUID(), UseDefaultIID());
    if (sourceHyperLink)
            UID sourceHyperLinkUID  = sourceHyperLink->GetSourceUID();
    but this interface may be not helpful in case of text in the frame (word/words) associated with hyperlink.
    If anyone has done this please do let me know.
    Thank you all in advance.
    Priyanka

    Hi All,
    I am still unable to get the solution of this issue. If anyone has done this please help me to find the solution.
    Thanks in advance.
    Priyanka

  • What do I have to do in creating a Keynote presentation on my MAC so that when I send it to my iPad, I don't have to re-do the presentation all over again as the fonts have changed, sizing has changed and everything is basically a mess?

    What do I have to do in creating a Keynote presentation on my MAC so that when I send it to my iPad, I don't have to re-do the presentation all over again as the fonts have changed, sizing has changed and everything is basically a mess?
    I have downloaded many of my previous Keynote presentation into my new ipad mini and not ONE has opened properly
    Rather defeats the purpose of icloud, synching, Keynote on IOS etc doesn't it?
    Any tips anyone?
    Cheers
    Philip

    Thanks for this Gary. Much appreciated. Will help with future ones.
    Still a bit like using keynote in 'safe mode' and very limiting.
    If anyone produces an 'auto convert' app that will save me the work of fixing existing presentations slide by slide, I'm buying it :-)
    Thanks again

  • Problems printing on custom sized paper.

    Hello all,
    I am trying to iron out my problems with printing on custom sized tractor paper (using an impact printer). Every time I print a test page, the printer behaves as if it was loaded with tractor paper that is 11 inches long, rather then the 7 inches that the forms are on.
    Before I list my code, let me explain everything that I have done. I am running Windows XP, so I went to the Printers and Faxes folder, clicked File > Server Properties, and created a custom form size (8.5" wide by 7" long with zero margins). Going back to the Printers and Faxes folder, I right clicked on the impact printer and clicked properties. From there I clicked the Device tab and selected my custom form that I had created for the tractor feed section. I then clicked the general tab and clicked the printing preferences. From there I clicked the Paper/Quality tab and selected Tractor Feed for the source. Then I clicked the advance button and selected my custom form for paper size. I also changed the resolution to 360X180.
    The printer itself has hardware settings for paper size. I've went through the menu and selected 7 inches for the form length.
    Now going to the code, I created the paper object and set it size to 612 for width and 504 for height. I also changed the ImageableArea to the size of the paper (which I think eliminates the margins), and set its orientation to 0, 0. I then set the paper object to the PageFormat, and used drawString to test my settings.
    Program compiles fine. When I run it and click the button, I select the correct printer. I also went through the preferences to make sure that all the setting are correct (especially to make sure my custom form is selected.). The closest I can get the string to the corner of the page is 75, 80. On the paper it measures 7/8" from the left, and 1" from the top.
    I have tested my custom form settings with word 2007. I was able to get the text on the very corner of the paper, and the printer was able to determine where the next form started. I believe that my problem lies within my code. Any help would be greatly appreciated!
    Thanks!
    import java.awt.*; 
    import java.awt.event.*; 
    import javax.swing.*; 
    import java.awt.print.*; 
    public class Print01 implements Printable, ActionListener { 
        public int print(Graphics g, PageFormat pf, int page) throws 
                                                            PrinterException { 
            if (page > 0) {  
                return NO_SUCH_PAGE; 
            double width = 612; 
            double height = 504; 
            Paper custom = new Paper(); 
            custom.setSize(width,height); 
            custom.setImageableArea(0,0,width,height); 
            pf.setPaper(custom); 
            Graphics2D g2d = (Graphics2D)g; 
            g2d.translate(pf.getImageableX(), pf.getImageableY()); 
            //The following returns the correct dimensions (612 width, 504 height). 
            System.out.println("Width: "+pf.getImageableWidth()+" Height: "+pf.getImageableHeight()); 
            g.drawString("Testing", 75, 80); //Smaller values result in clipping. 
            return PAGE_EXISTS; 
        public void actionPerformed(ActionEvent e) { 
            PrinterJob job = PrinterJob.getPrinterJob(); 
            job.setPrintable(this); 
            boolean ok = job.printDialog(); 
            if (ok) { 
                try { 
                     job.print(); 
                } catch (PrinterException ex) { 
        public static void main(String args[]) { 
            UIManager.put("swing.boldMetal", Boolean.FALSE); 
            JFrame f = new JFrame("Test page printer."); 
            f.addWindowListener(new WindowAdapter() { 
                  public void windowClosing(WindowEvent e) {System.exit(0);}}); 
            JButton printButton = new JButton("Print test page."); 
            printButton.addActionListener(new Print01()); 
            f.add("Center", printButton); 
            f.pack(); 
            f.setVisible(true); 
    } 

    I have a similar code to print a jasperreport,
    when I ran on Windows, the report is printed normally, all the document appeared, but when I ran on Linux (Debian), the document is missing some parts of report, printed without lines, appear only the middle of report. I don't understand what happen, on windows is ok, but linux is wrong. I tried the margins, but didn't work.
    Some one have an idea that can help me?
    sorry my english, but I need print in linux.
    Thanks a lot
    JasperPrint jasperPrint = JasperFillManager.fillReport(diretorioProjetos, parametros, getConexao().getConnection());
                getConexao().close();
                PrinterJob job = PrinterJob.getPrinterJob();
                /* Create an array of PrintServices */
                PrintService[] services = PrintServiceLookup.lookupPrintServices(null, null);
                int selectedService = 0;
                /* Scan found services to see if anyone suits our needs */
                for (int i = 0; i < services.length; i++) {
                    if (services.getName().toUpperCase().contains("HPD1360")) {
    /*If the service is named as what we are querying we select it */
    selectedService = i;
    job.setPrintService(services[selectedService]);
    PrintRequestAttributeSet printRequestAttributeSet = new HashPrintRequestAttributeSet();
    MediaSizeName mediaSizeName = MediaSizeName.ISO_A4;
    printRequestAttributeSet.add(mediaSizeName);
    printRequestAttributeSet.add(new MediaPrintableArea(
    0f, 0f,
    85f,
    54f, Size2DSyntax.MM));
    //MediaSize.findMedia(85f, 54f, Size2DSyntax.MM);
    printRequestAttributeSet.add(new Copies(1));
    JRPrintServiceExporter exporter;
    exporter = new JRPrintServiceExporter();
    exporter.setParameter(JRExporterParameter.JASPER_PRINT, jasperPrint);
    /* We set the selected service and pass it as a paramenter */
    exporter.setParameter(JRPrintServiceExporterParameter.PRINT_SERVICE, services[selectedService]);
    exporter.setParameter(JRPrintServiceExporterParameter.PRINT_SERVICE_ATTRIBUTE_SET, services[selectedService].getAttributes());
    exporter.setParameter(JRPrintServiceExporterParameter.PRINT_REQUEST_ATTRIBUTE_SET, printRequestAttributeSet);
    exporter.setParameter(JRPrintServiceExporterParameter.DISPLAY_PAGE_DIALOG, Boolean.FALSE);
    exporter.setParameter(JRPrintServiceExporterParameter.DISPLAY_PRINT_DIALOG, Boolean.FALSE);
    exporter.exportReport();

  • What is your export process for printing custom-sized books?

    I will be printing my first custom-sized book created in Aperture.
    Anyone have much experience doing this?
    I am assuming that exporting to pdf and then sending that file to print is the process, but I'm wondering if the compression will affect the image quality enough to be concerned for a 9''x9'' book?

    Lots of experience here.
    I outsource albums either as single page or double spread. Unfortunately Aperture only allows single page export, not as a full spread (required by some printers).
    Unfortunately the Export options are a little limited, so read on
    If you click on the Print button for your custom sized book, you'll get a dialog. Choose the PDF button at the bottom and a bunch of options will appear.
    If you just want to export a proof for a client to review, you can select Save PDF to Aperture. The files will import as 200dpi JPEGs / TIFFs depending upon the option you choose. You can then export to a sharing service / web album etc.
    If you want to export at a different dpi then DON'T choose the Save PDF to folder as JPEG option... again you'll get just 200dpi images. So what you can do is choose the Save as PDF option. When you choose that it will export the whole book as single pages in a PDF, with the embedded JPEGs (fully quality jpeg 12) at 350dpi (I know as I've checked this)....
    You can then do 2 things:
    1. For services that require a single pages, run an automator action to run through the PDF and export the images at your desired DPI and change the colour profile (eg sRGB). Your images are then exported to the same folder. Here's the action: http://dl.dropbox.com/u/117989/Save%20PDF%20to%20Folder%20as%20JPEG.zip
    2. For services that require a double page spread instead, run an automator action to run through the PDF, change the colour profile and DPI and then import to Aperture.
    What I do is have an entirely separate project called Album Proofs and import all images into there. When the action runs, it will ask where to put the images - place them in Album Proofs. I then have a custom book size that is twice the width of the album you are creating (e.g. if making a 12x9, the size is 24x9) with no margins or spacing. Then create a template album (you can reuse by right clicking and selecting Duplicate Book) that has two images per page, each image taking up EXACTLY half of the page (again no margins or spacing). I then drag the images I imported into this template, then auto-fill unplaced images. Your images are then layed out as spreads... So now what you do is re-export using the Save as PDF print option. Then run the action described in 1 above.
    Here's the action: http://dl.dropbox.com/u/117989/Save%20PDF%20to%20Aperture%20as%20JPEG.zip . If it doesn't work use the other action above and just import manually.
    Hope this helps

  • How can I create a custom sized video in PP cs6?

    How can I create a custom sized video in PP cs6? I have read references to the "desktop" setting but cannot find it. I am trying to find the right settings for a 1080 px x 486 px video (which I need to qualify for hi res on Vimeo).  I need to output a 450 x 1000 px video for
    my website. Ideally, I'd like the sequence settings as well as the output settings. I am using still shots- no actual video.

    What are the exact properties of the still images, particularly the pixel dimensions and pixel aspect ratio (PAR).* The letterboxing (black bars top & bottom) is most likely a result of a mismatch in these settings. If this is the case, then the easiest fix is to make sure not only the dimensions but the PAR match.
    Say for instance your source images are 1000x1000 with a PAR of 1.0 (square pixels) and your sequence is set also set to 1000x1000 but with the PAR set to D1/DV NTSC (0.9091), the result would be letterboxing as seen here:
    *if you're not sure about the PAR of your source images, right click on one of them in the Project panel and select Properties.

  • Default printer does not appear in custom-sized templates

    I posted this question in the 'Pages' community, but received no replies, so I am possting it again here.
    I now have an Epson XP-750 printer-scanner. I have set it as my default printer in System Preferences. When I create a document in Pages whose paper size is one of the standard ones catered for by the XP-750 or open a previously saved one in one of those sizes, or I open a document from one of the templates provided by Pages, the printer shown in Page Setup is always the XP-750. But if I create a document in a custom size (such as a 9 cm x 14 cm correspondence card), Page Setup shows 'Any Printer' until I re-set it to 'XP-750', and even if I save the document or save it as a template and then re-open it, the printer is always shown as 'Any Printer'.
    Is there any way of making the XP-750 'stick' as the printer shown in Page Setup even in these custom documents?

    Thanks for this, Joe Bailey. I am ignorant of programming and cerainly wouldn't dream of trying to make such a modification. But the interesting thing is that if I create a document in MS Word and give it a custom size, the printer's name and paper size are retained after saving, closure and re-opening, though they are not retained in Pages.
    I want to use Pages for my custom-sized correspondence cards because the database that I use for mail merge is in Numbers. I suppose I could export it as Excel and use that with a Word correspondence card, but it all gets a bit messy, especially when it comes to updating the database, and will be a lot of work, as I have several such cards with different letter-heads, etc.
    I contacted Epson about this problem, and they said it was a matter for the application in which the custom-sized document was created — i.e. Pages in my case — so according to Epson it is not a matter of the printer driver.

Maybe you are looking for