ORA-01003: there is not instruction analyzed

Sorry my bad english
I installed the Apex 3.2 it is run correctly, but on area SQL Workshop I can't create tables and not show data of tables that already exist when I insert the command select for exemple.
In SQL Plus I created one table TEST1 and I can insert, updated and selected data normally.
When I go in SQL Workshop in the APEX, I can see the table TEST1 and when I inserted the command select in the local Comandos SQL display the following message
"report error: ORA-01003: there is not instruction analyzed"
My user on SQL Plus is "SYSTEM" and on APEX my workspace "SYSTEM" with user "SYSTEM"
thanks

Hi,
SYSTEM schema is something that gets created when you install Oracle DB, and it is something special.
I would recommend you create a new schema and workspace and work there, leave SYSTEM and Oracle created schemas alone.
System , being the owner of DB internal stuff, is a protected schema and hence you will have all kinds of issues. If you make it available to any of the Apex workspaces you will only make your DB vulnerable.
Regards,

Similar Messages

HT4436 I updated the software on my iphone to 7.0.4 and since then all my contacts are gone. I tried to sign into icloud and it said my account is not verified. It said I should go to my mail to see how to verify my account but there is no instruction in

I updated the software on my iphone to 7.0.4 and since then all my contacts are gone. I tried to sign into icloud and it said my account is not verified. It said I should go to my mail to see how to verify my account but there is no instruction in my mail

Hi stanlaw,
Welcome to the Support Communities!
The information below should help you with this.
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
How to verify the primary email address for your Apple ID
When you first create an Apple ID (using your email address) a verification email will be sent to that address. If you sign in to your Apple ID from the link in that email, the email address will be verified as the primary email address for your Apple ID. You can also resend the email verification if the email address is not verified:
1. Sign in to My Apple ID to manage your account information.
2. Click Resend under Primary Email Address.
3. Verify your changes by following the link in the email you will receive from Apple and signing back in to your account.
I hope this information helps ....
Happy Holidays!
- Judy

ORA-01003 Error from jbpm/hibernate

We are using the JBoss jbpm workflow solution which uses hibernate as the persistence API. Intermittently we are getting failures when it is trying to insert into the jbpm_log table. Looking at low level jdbc logging it appears to be constructing prepared statements correctly and binding variables. Is it possible for this error to be caused by memory issues on the database server side eg lack of free space in shared pool ?
Extract of server log below:-
DEBUG - 2007-04-02 13:46:05,003 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.AbstractBatcher (closePreparedStatement:470) - closing statement
DEBUG - 2007-04-02 13:46:05,004 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.ConnectionManager (aggressiveRelease:305) - aggressively releasing JDBC connection
DEBUG - 2007-04-02 13:46:05,005 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.ConnectionManager (closeConnection:342) - releasing JDBC connection [ (open PreparedStatements: 0, globally: 0) (open ResultSets: 0, globally: 0)]
DEBUG - 2007-04-02 13:46:05,006 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.AbstractBatcher (logOpenPreparedStatement:311) - about to open PreparedStatement (open PreparedStatements: 0, globally: 0)
DEBUG - 2007-04-02 13:46:05,007 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.ConnectionManager (openConnection:322) - opening JDBC connection
DEBUG - 2007-04-02 13:46:05,008 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] hibernate.SQL (log:346) - insert into JBPM_LOG (INDEX_, DATE_, TOKEN_, PARENT_, TRANSITION_, SOURCENODE_, DESTINATIONNODE_, CLASS_, ID_) values (?, ?, ?, ?, ?, ?, ?, 'T', ?)
DEBUG - 2007-04-02 13:46:05,010 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.AbstractBatcher (getPreparedStatement:424) - preparing statement
DEBUG - 2007-04-02 13:46:05,011 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] entity.AbstractEntityPersister (dehydrate:1821) - Dehydrating entity: [org.jbpm.graph.log.TransitionLog#1419786]
DEBUG - 2007-04-02 13:46:05,012 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.AbstractBatcher (addToBatch:28) - Adding to batch
DEBUG - 2007-04-02 13:46:05,013 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] entity.AbstractEntityPersister (insert:2034) - Inserting entity: [org.jbpm.graph.log.ActionLog#1419787]
DEBUG - 2007-04-02 13:46:05,014 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.AbstractBatcher (doExecuteBatch:55) - Executing batch size: 1
DEBUG - 2007-04-02 13:46:05,017 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.AbstractBatcher (checkRowCount:85) - success of batch update unknown: 0
DEBUG - 2007-04-02 13:46:05,018 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.AbstractBatcher (logClosePreparedStatement:319) - about to close PreparedStatement (open PreparedStatements: 1, globally: 1)
DEBUG - 2007-04-02 13:46:05,020 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.AbstractBatcher (closePreparedStatement:470) - closing statement
DEBUG - 2007-04-02 13:46:05,021 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.ConnectionManager (aggressiveRelease:305) - aggressively releasing JDBC connection
DEBUG - 2007-04-02 13:46:05,022 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.ConnectionManager (closeConnection:342) - releasing JDBC connection [ (open PreparedStatements: 0, globally: 0) (open ResultSets: 0, globally: 0)]
DEBUG - 2007-04-02 13:46:05,023 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.AbstractBatcher (logOpenPreparedStatement:311) - about to open PreparedStatement (open PreparedStatements: 0, globally: 0)
DEBUG - 2007-04-02 13:46:05,024 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.ConnectionManager (openConnection:322) - opening JDBC connection
DEBUG - 2007-04-02 13:46:05,025 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] hibernate.SQL (log:346) - insert into JBPM_LOG (INDEX_, DATE_, TOKEN_, PARENT_, EXCEPTION_, ACTION_, CLASS_, ID_) values (?, ?, ?, ?, ?, ?, 'A', ?)
DEBUG - 2007-04-02 13:46:05,026 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.AbstractBatcher (getPreparedStatement:424) - preparing statement
DEBUG - 2007-04-02 13:46:05,027 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] entity.AbstractEntityPersister (dehydrate:1821) - Dehydrating entity: [org.jbpm.graph.log.ActionLog#1419787]
DEBUG - 2007-04-02 13:46:05,028 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.AbstractBatcher (addToBatch:28) - Adding to batch
DEBUG - 2007-04-02 13:46:05,030 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] entity.AbstractEntityPersister (insert:2034) - Inserting entity: [org.jbpm.taskmgmt.log.TaskCreateLog#1419788]
DEBUG - 2007-04-02 13:46:05,031 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.AbstractBatcher (doExecuteBatch:55) - Executing batch size: 1
DEBUG - 2007-04-02 13:46:05,126 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.AbstractBatcher (logClosePreparedStatement:319) - about to close PreparedStatement (open PreparedStatements: 1, globally: 1)
DEBUG - 2007-04-02 13:46:05,127 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.AbstractBatcher (closePreparedStatement:470) - closing statement
DEBUG - 2007-04-02 13:46:05,129 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.ConnectionManager (aggressiveRelease:305) - aggressively releasing JDBC connection
DEBUG - 2007-04-02 13:46:05,130 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] jdbc.ConnectionManager (closeConnection:342) - releasing JDBC connection [ (open PreparedStatements: 0, globally: 0) (open ResultSets: 0, globally: 0)]
DEBUG - 2007-04-02 13:46:05,132 [[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] util.JDBCExceptionReporter (logExceptions:63) - Could not execute JDBC batch update [insert into JBPM_LOG (INDEX_, DATE_, TOKEN_, PARENT_, EXCEPTION_, ACTION_, CLASS_, ID_) values (?, ?, ?, ?, ?, ?, 'A', ?)]
java.sql.BatchUpdateException: ORA-01003: no statement parsed
     at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:367)
     at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:9040)
     at weblogic.jdbc.wrapper.PreparedStatement.executeBatch(PreparedStatement.java:157)
     at org.hibernate.jdbc.BatchingBatcher.doExecuteBatch(BatchingBatcher.java:58)
     at org.hibernate.jdbc.AbstractBatcher.executeBatch(AbstractBatcher.java:195)
     at org.hibernate.jdbc.AbstractBatcher.prepareStatement(AbstractBatcher.java:91)
     at org.hibernate.jdbc.AbstractBatcher.prepareStatement(AbstractBatcher.java:86)
     at org.hibernate.jdbc.AbstractBatcher.prepareBatchStatement(AbstractBatcher.java:171)
     at org.hibernate.persister.entity.AbstractEntityPersister.insert(AbstractEntityPersister.java:2048)
     at org.hibernate.persister.entity.AbstractEntityPersister.insert(AbstractEntityPersister.java:2427)
     at org.hibernate.action.EntityInsertAction.execute(EntityInsertAction.java:51)
     at org.hibernate.engine.ActionQueue.execute(ActionQueue.java:243)
     at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:227)
     at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:140)
     at org.hibernate.event.def.AbstractFlushingEventListener.performExecutions(AbstractFlushingEventListener.java:296)
     at org.hibernate.event.def.DefaultFlushEventListener.onFlush(DefaultFlushEventListener.java:27)
     at org.hibernate.impl.SessionImpl.flush(SessionImpl.java:1007)
     at org.hibernate.impl.SessionImpl.managedFlush(SessionImpl.java:354)
     at org.hibernate.transaction.JTATransaction.commit(JTATransaction.java:135)
     at org.jbpm.persistence.db.DbPersistenceService.close(DbPersistenceService.java:161)
     at org.jbpm.svc.Services.close(Services.java:211)
     at org.jbpm.JbpmContext.close(JbpmContext.java:138)

Hi Joe, Thanks for your quick response. I have sent you an email regarding a BEA support case we have raised for this.
Just to add some more info here :-
The failure on the insert into jbpm_log only happens intermittently, 99% are successfully inserted including the exact same insert statement (with different bind variable values).
My thoughts on investigating this are that it could be to do with statement caching as it does appear that the cursor that weblogic has cached a handle to may be invalid in terms of the shared sql is no longer in the oracle shared pool. I would have expected that Oracle would have reparsed the statement and it shouldnt fail but I am not familiar with the detail of weblogic statement caching implementation, only of the oracle jdbc driver level.
Occassionally I have also seem the following Oracle error and dont know whether there is some connection with this.
ORA-01461: can bind a LONG value only for insert into a LONG column

ORA-01003 when using SQL*Loader

Hi people,
Can anyone shed some light on this.
We have a multitasked dataload operation that is using SQL*Loader and on occasion we're seeing some rows failing due to ORA-01003 no statement parsed. Could this be due to some shortage of a database resource (cursors, connections ??) or are there other well known reasons for this.
Any help appreciated.
Regards
Andy

Check those registers ( rows ) in the bad file or in the discard file. If the register(s) are in the discard file is because the register ( row ) does not complete the requirements of denoted in the controlfile file and if those registers are in the error file is because the database is rejecting them according to constraints and so on.
Conclusion: realize in what file those rows are being stored after to be rejected.
Joel Pérez

I have a WD My Passport for Mac (2 TB). It quit backing up my mac mini (8/2013) stating that it needed to be repaired. Our IT person reformatted it. Now time machine states that it can't back up 234 GB, because there's not enough space.

I have erased the passport for Mac and started all over. When there is ~15 minutes left in the initial backup of the mac mini hard drive (234 GB total), it gets weird and time machine states that it it calculating the time remaining. 24 hours later, it is still backing up but shows that <200 GB of 2 TB are available and it quits backing up stating that there is not enough room. HELP! The WD My Passport for Mac and the Mac mini are less than a year old.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

ORA-01821: date format not recognized Error in PL/SQL report-4.0

Hi,
I am using Apex 4.0 and i have a Classic report(function returning query) which selects a date column.
The query runs at the backend and gives the output.
But when i run the report on the page, i get the error
report error:
ORA-20001: Error fetching column value: ORA-01821: date format not recognizedThe values for the date column are like this 14-MAR-13,01-FEB-13 etc... Everything seems to be right.
But I have no idea why this error occurs.
Thanks
Divya

Aren't these errors annoying! But there's a data / format mismatch for sure. What I need to see -- and what will tell you what is wrong -- is
1) exactly what the data is and
2) exactly what the format string is that is being used to convert it.
The values for the date column are like this 14-MAR-13,01-FEB-13 etc... Question: Is this the source data or the target data ( what it's supposed to look like after being converted)?
Let's start there:
What is the source? Is it a DB column? Is it type date or VARCHAR2 or what?
If VARCHAR2, then give us an example of the data that is failing.
What is the format -- I assume there is one -- being used to convert the data?
Are you doing a TO_CHAR or a TO_DATE?
Give us lots of detail, please. Then it should be easy to solve.
Regards,
Howard

I have a ipod touch and i got it for christmas with an iTunes card .the problem is that i downloaded videos and now it said that there is not enough space and i only downloaded 8 and now 5 don't download how do i erase them.can get my money back

i have a ipod touch and i got it for christmas with an iTunes card .the problem is that i downloaded videos and now it said that there is not enough space and i only downloaded 8 and now 5 don't download how do i erase them.can get my money back

Whatever you read about iTunes is wrong unless you're actually referring to feature movies, not videos. Videos, apps, music and iBooks you can re-download:
http://support.apple.com/kb/ht2519
Download to your computer and then sync to your iPod touch whatever will fit.
And no, I can't say with certainty that they won't give you a refund, but it's unlikely. The most probable outcome, if you do indeed mean movies, not TV shows or other videos, is that they would set up an additional download. For other content they'll probably just direct you to the same instructions on re-downloading I just posted.

"There was not enough memory" error message when saving DNG and Jpeg

PC/Windows XP Pro. Pentium 4/2Gb RAM.
I am constantly getting memory errors when trying to save batches of images from ACR4 either as Jpegs or DNGs.
A couple of images in to the batch a small window appears with a list of the files and next to each of them is the line: "There was not enough memory."
These are 220Mb TIFF files that are processed in Hasselblad's Flexcolor on the same computer. I can process an entire folder full (sometimes 50 images) without a hitch in Flexcolor, but Bridge/ACR4 and CS3 can't handle any reasonable number of images.
Could it be something in my settings? For the record, they are:
In Bridge, under Edit/Preferences/Camera RAW preferences, Camera Raw Cache is set to 10Gb. Jpeg and Tiff handling boxes are both ticked.
Under Edit/Preferences/Cache, Cache Size slider is slightly over half way to the right.
In addition, I have CS3 pointed to a formatted 500GB scratch disk all to itself.
And CS3's RAM is set to 80%.
Finally, this computer is used for nothing else except image editing.
Any ideas?
Thanks.
D.

Thomas,
Thanks for the reply.
If you mean by "Public Beta", did I download the 10.4Mb plug-in (as per John Cornicello's link above) and install it at Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats in place of the old plug-in, then yes.
I always run ACR4 via Bridge, never via CS3. CS3 always comes after conversion in my workflow. Also, I like to give Bridge/ACR a free run of available resources. Nothing else is ever open when I'm running them.
In CS3 under Edit/Preferences/File Handling, under Image Previews I selected 'Never Save'. Not sure if this affects ACR though.
Also, as per the suggestion in the article referred to in my last post, I removed the tilde ~ to activate the Bigger Tiles plug-in. CS3's memory % is now set @ 90%.
The only thing I haven't done is to activate the Microsoft 3Gb switch. I can't find instructions that are clear enough. Also, it may be that it makes no difference when running Vista 64bit, as I am.
For what it's worth, with these fine tunings, CS3 now executes the Retouch Artist's Speedtest in 20 seconds, a shade faster than before. This is extremely fast, so my setup should not be the problem here. I hope! ;-)
Finally, is there any point in trying LR? Or is its file saving/cache setup the same as ACR's?
Thanks for taking an interest in my case. I'm very happy to be a guinea pig since I will constantly have to process large numbers of files and I'd like to overcome this problem
Many thanks.
D.

The iPhone could not be restored. There is not enough memory available.

Hi guys,
you all seem the be fairly acquainted with all possible iPhone problems. I was searching this forum for an answer to my problem. iTunes won't restore my iPhone because of an error mentioned in the title of this topic - The iPhone could not be restored. There is not enough memory available. I haven't found anything on the net that I haven't tried yet.
Am using Windows XP, iTunes 7.4.3 and the iPhone used to be on the firmware 1.0.2. I was trying to do the restore but it gave me that error message. I tryed uninstalling everything with WinASO registry cleaner, iTunes, apple device thing(or whatever), installed it 3 times, tried to force the previous firmware with Shift+restore, but nothing. I also tried to switch USB ports. I followed the instruction on how to remove iTunes exactly like it was described in another thread - no success.
Is there any help you can maybe provide, but don't tell me to go/send it to an Apple Store, since I live in Europe, where there is no official iPhone yet.
PLease help

iohen wrote:
Hi,
is there a newer version of iTunes than 7.4.3, which I am already using ?
I don't think so.
And no, the iPhone has not been hacked before, I was using it like iPod, internet browser and stuff. But no calls.
My version of iTunes say 7.4.3.1.
I assume that by saying that your iPhone has not been hacked before means "it has never been hacked."
Are you paying AT&T for monthly service?
I would still try to download a fresh copy of iTunes if possible.
If it does not work, I think that you need to take the iPhone back to the Apple Store or call AppleCare for assistance. The store, and AppleCare, has a number of software tools to potentially diagnose the problems you are encountering.

Java.sql.SQLDataException: ORA-01878: specified field not found in datetime

I am getting the exception mentioned in the subject field. Here is the query
select * from tabel_abc where from_tz(cast(LAST_RECEIVED_TIME + timeout_duration/86400 as timestamp),'UTC') <systimestamp at time zone 'UTC';
This is happening only for the during the daylight saving, because the date operation is returning the incorrect time value.
timeout_duration holds the value in terms of number of seconds.
Please suggest how to resolve the issue.
Caused by: java.sql.SQLDataException: ORA-01878: specified field not found in
datetime or interval
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
at
oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at
oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.ja
va:1079)
at
oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1
293)
at
oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1
419)
at
oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedState
ment.java:3752)
at
oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatemen
t.java:3806)
at
oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedS
tatementWrapper.java:1667)
at
weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:13
5)
at

>
When I run the following expression on this value I get the ORA-01878 error:
(EXTRACT(DAY FROM ((ETD_ZULU - 4/24) - SYSTIMESTAMP)))
>
That isn't the same as the snippet you first posted
This works
select EXTRACT(DAY FROM ((ETD_ZULU - 4/24) - SYSTIMESTAMP)) from
(select cast (systimestamp as timestamp(6)) etd_zulu from dual)The first snippet you posted was
>
select * from tabel_abc where from_tz(cast(LAST_RECEIVED_TIME + timeout_duration/86400 as timestamp),'UTC') <systimestamp at time zone 'UTC';
>
And it includes time zone. All of the web references I have found indicate the problem is either a missing timezone or a timezone mismatch.
I can't reproduce the problem with the last snippet you used. Are you certain that ETD_ZULE is timestamp and does not include timezone?
Do you have a complete query that fails? If so, try to narrow the query down to one record that is causing the problem. If you have to you can use brute force approach. Assume that 60 records should be produced. Add
WHERE ROWNUM < 30to the query. If it runs clean the problem is in the second half so use '< 40', and keep testing until you know which record. Then examine the contents of the field for that record.
Without some code to try to reproduce the problem there isn't much other help to offer.

ORA-01435: user does not exist when using imp utility

I installed Oracle 8.1.7.0.0 successfully on WINDOWS 2000 and created a database TEST using DBCA. Then I used a script to creat a tablespace and a user in TEST databse. I could use the imp utility to import the data (a dmp file) to the TEST database without any problem. But after I applied a patch to bring up the version to Oracle 8.1.7.4.1, I got the following error when I tried to use the imp utility again to import the data (a dmp file) to the TEST database.
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
IMP-00000: Import terminated unsuccessfully
I checked that I created the same user test (as it is in dmp file I wanted to import) on TEST, and I could login to TEST using:
sqlplus test/test@TEST
The command I used is:
imp system/password@TEST file=test.dmp full=y log=importTEST.TEST.tmp
I also tried to use the following command:
imp system/password@TEST file=test.dmp fromuser=test touser=test log=importTEST.TEST.tmp
and got the same error as before.
Anyone has any clues what could go wrong? The only difference for me to import the data on TEST is that the
previous successful import was done in Oracle 8.1.7.0.0.
Is it possible that I missed something during the applying of the patch 8.1.7.4.1?
Thanks, and your help is greatly appreciated.
Jane

Ther is a set of instruction to be followed after installing the patch set 8.1.7.4.1 after running it thru OUI.They are as follows. Please complete these steps and u should not have problems any more.
When applying this patchset on Windows NT and Windows 2000, you must log onto the system as a user with Administrative privileges (e.g., as a user which is a member of the local Administrators group).
1.Disabling system triggers.
Before performing the next step, you must first set SYSTEMTRIG_ENABLED = FALSE in the initialization parameter file. To do this add the following line to your init<sid>.ora file and restart the database (see Note 149948.1 in Metalink for more information on this issue).
systemtrig_enabled=false
2.Invoke SQL*Plus (sqlplus), connect as internal and run the following:
select * from duc$ where PACK='JIS$INTERCEPTOR$' ;
If no rows were returned go to the next step. If a row was returned delete it using the following:
delete from duc$ where PACK='JIS$INTERCEPTOR$' ;
commit;
3.Invoke SQL*Plus (sqlplus), connect as internal and run the following SQL scripts with event 10520 set. NOTE: This event is not intended for regular database operation and when turned on below by the 'ALTER SESSION' command will automatically be turned off by the subsequent 'CONNECT' command.
ALTER SESSION SET EVENTS '10520 TRACE NAME CONTEXT FOREVER, LEVEL 10';
?/rdbms/admin/catalog.sql
?/rdbms/admin/catproc.sql
?/rdbms/admin/catrep.sql (This only needs to be run if you are using symmetric/advanced replication. This is not necessary for sites using dblinks and read-only snapshots if symmetric/advanced replication is not installed)
CONNECT / AS SYSDBA;
update obj$ set status=5 where type#=29 and owner#!=0;
commit;
4.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install.
If Java has previously been loaded into the database, invoke SQL*Plus (sqlplus), connect as internal and run the following SQL DDL command(* Note:If Java has not previously been loaded into the database, skip this step).:
SQL> create or replace java system
2 /
(Note that the / (slash) is important to ensure the execution of the command).
To ensure the correct installation of the XDK in the database run the following 2 scripts (Bug 2115227):
$ORACLE_HOME/oracore/admin/initxml.sql
$ORACLE_HOME/rdbms/admin/catxsu.sql
* To determine whether Java has previously been loaded into the database:
invoke SQL*Plus (sqlplus), connect as internal and run the following:
SQL> select count(*) from all_objects where object_type like 'JAVA%';
Java is installed if you get a non zero result returned from the query.
5.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install:
If Java has previously been loaded into the database, invoke SQL*Plus (sqlplus), connect as internal and run the following scripts which are located in $ORACLE_HOME/javavm/install ( Note: If Java has not previously been loaded into the database, you can skip this step):
load_jis.sql
jisja.sql
initjsp.sql
jspja.sql
Notes:
When running the $ORACLE_HOME/javavm/install/jisja.sql script the following error may be reported and can be ignored:
call jis_exit_java_session(0)
ERROR at line 1:
ORA-29515: exit called from Java code with status 0
Bug 1459233 was filed against this problem which is fixed in 9i.
6.If you deleted a row from duc$ in step 8 then reinsert it again. Invoke SQL*Plus (sqlplus), connect as internal and run the following SQL:
insert into duc$ (OWNER, PACK, PROC, FIELD1, OPERATION#, SEQ) values ('SYS', 'JIS$INTERCEPTOR$', 'USER_DROPPED', 0, 1, 1);
commit;
7.Enabling system triggers.
You must either remove SYSTEMTRIG_ENABLED from the initialization parameter file or explicitly set it to TRUE before attempting any other patch set post-install steps. Restart the database.
8.This step is optional - it will recompile all invalid PL/SQL packages now rather than when accessed for the first time - you can also use utlrcmp.sql to parallelize this. Invoke SQL*Plus (sqlplus), connect as internal and run the following SQL script:
?/rdbms/admin/utlrp.sql
9.Execute the following steps only if you have installed Oracle interMedia Text in the database you are attempting to modify:
If you have not previously unlocked the ctxsys account and supplied a password for that account, you need to do so. (If you have needed to use Oracle Text in any way prior to applying the patchset, you will have already performed this step, and you can skip this.) Do so by issuing the following statement:
ALTER USER ctxsys IDENTIFIED BY <passwd> ACCOUNT UNLOCK;
If you have already installed 8.1.7.2 or 8.1.7.3, go directly to step 7 below.
If you have already installed 8.1.7.1, go directly to step 5 below.
CONNECT ctxsys/<passwd>;
@?/ctx/admin/upgrade/u0801071.sql
CONNECT ctxsys/<passwd>;
@?/ctx/admin/upgrade/u0801072.sql
CONNECT / AS SYSDBA;
@?/ctx/admin/upgrade/s0801074.sql
CONNECT ctxsys/<passwd>
@?/ctx/admin/dr0pkh.sql
@?/ctx/admin/dr0plb.sql
@?/ctx/admin/dr0type.plb
@?/ctx/admin/dr0typec.plb
9.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install:
The installation of this patch set fixes a potential security hole in the XSQL Servlet - see here for more detail. The patchset installation does not, however, modify any of the Oracle HTTP Server configuration files to reflect changes to the XSQL Servlet installation. If you have previously installed the Oracle HTTP Server, you will need to update one of the configuration files manually after the patchset installation is complete. If you do not do so, the XSQL Servlet may not work in the context of the Oracle HTTP Server after the patchset is installed. To update your Oracle HTTP Server configuration, perform the following steps:
1) Edit the file: $ORACLE_HOME/Apache/Jserv/conf/jserv.properties
2) Search for the string: "XSQLConfig.xml File location"
3) Modify the parameter wrapper.classpath on the line immediately following the above string to read: $ORACLE_HOME/oracore/admin
4) Save the file.
10.You can ignore this step if you have already executed it as part of a previous 8.1.7 patch set install:
The installation of this patch set fixes a potential security hole in the PL/SQL XML parser - see here for more detail. To load the new XML parser in to the database, run the following script as user SYS:
? /xdk/plsql/parser/bin/load.sql
11.If you are using the RMAN catalog then upgrade it as follows:
rman catalog <user/passwd@alias>
upgrade catalog;
upgrade catalog;
The post install actions are now complete and the database is now ready for use.

Error ORA-02289: sequence does not exist

While I was practicing chapter 6 a book on "hands-on oracle database 10 g express edition for windows" by Mr. Bobrowski forwarded by tom kyte, I like to be one those as well, lol, the living legend of oracle technology <page 225-226> , I got the following error while trying to insert the data manually
error ORA-02289: sequence does not exist
I also checked the sequence, it does exist ,
host-ids, db-ids, ap-ids all do exists
I am wondering my OS windows xp and however, I have entered AIX in host OS field and 5.2.0.0 in the hostos_version field and cpu=4
I kind do not understand this too since my pc running windows xp
any help would be appreciated since i couldn't go forward in my practice.
I e-mailed the author of the book (oracle Press) but no-reply so far, well I can understand that there is no money.

Basically, I copied everything from the cd-rom provided in the book of this author steve, oracle press. I logged on using my account <system> and password. The user is here only one which is <system>.
Everything was working well, until then as per the direction in the chapters upto 1- to mid 6, this is the first time I am stuck in following this book's simple excercises. It also asks me to look at the object if the sequence host_ids does exists in the drop down combo, as a matter of fact it does exist.
I am still wondering my question "my OS windows xp and however, I have entered AIX in host _OS field and 5.2.0.0 in the host_os_version field and cpu=4
I kind do not understand this too since my pc running windows xp "

ORA-12514 TNSlistener does not currently know of service requested in conne

When I connect in command prompt using username,password & Host String(tnsNames.ora). Its succeed as seen below.
C:\>sqlplus sonia/mypass@sonia - In this line First sonia is the userName & second Sonia is the host from the tnsnames.ora
SQL*Plus: Release 11.2.0.2.0 Production on Wed Jul 4 13:12:43 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - ProductionBut When I use the sqlPlus screen to connect to Oracle -
UserNAme - sonia
Password - mypass
HostString - sonia
I am getting ERROR - ORA-12514 TNSlistener does not currently know of service requested in connect descriptor.
I am not getting why I am not able to LOGIN FROM SQLPLUS SCREEN.
I searched on the net, But still No LUck.My database is also started which I find using the C:>sc query OracleServiceXE
tnsnames.ora (LOCATION - C:\oracle\product\10.2.0\client_1\network\admin\tnsnames.ora
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\client_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
SONIA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = sonia)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = SONIA)
tnsNAmes.ora -C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = sonia)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
Listener.ora -C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN
XE =
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = sonia)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)I am still confused in that I have two tnsNames.ora in different locations.Is that OK?

hello All,
Thanks you all.
I am succeed in login through SQL PLus Screen. I make the two tnsNames.Ora exactly same. & it worked for me.
TnaNames.Ora
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = sonia)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
) Through Command prompt : -
FIRST LOGIN
C:\>sqlplus sonia/mypass@XE
SQL*Plus: Release 11.2.0.2.0 Production on Fri Jul 6 14:04:35 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
SQL>SECOND LOGIN : -
C:\>sqlplus sonia/mypass@sonia
SQL*Plus: Release 11.2.0.2.0 Production on Fri Jul 6 14:03:50 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
SQL>1) I want to ask that, Now in TnsNames.Ora there is no HostString Exist named Sonia, then how in the second method (SEE ABOVE), I am able to login using sonia.
2) Secondly, I want to know how to get TNS_ADMIN value. I have tried but no output for me (SEE BELOW)
C:\>set TNS_ADMIN=%ORACLE_HOME%\network\admin
C:\>echo %ORACLE_SID%
%ORACLE_SID%
C:\>I have read on the net : - If ORACLE_HOME is not set, the output will simply give back %ORACLE_HOME%. It means my TNS_ADMIN is not set.

Error:ORA-01003: no statement parsed

Hi,
While clicking on details button of customized form it's give below error:
1)Error:
ORA-01003: no statement parsed
Details..:
ORA-01003: no statement parsed
FRM-407535: ON-UPDATE trigger raised unhandled exception ORA-04098
FND_FORMS_ERROR_MSG(ERRNO=4098) (REASON=ORA-01003: no statement parsed)
2)Error:
APP-FND-01388: Cannot read value for profile option
FND_LOOK_AND_FEEL in routine & ROUTINE..
Details..
Message History
APP-FND-01388: Cannot read value for profile option FND_LOOK_AND_FEEL in routine &ROUTINE.
APP-FND-01388: Cannot read value for profile option FND_COLOR_SCHEME in routine &ROUTINE.
APP-FND-01388: Cannot read value for profile option FND_INDICATOR_COLORS in routine &ROUTINE.
ORA-01003: no statement parsed
Please help me how to sort out the problem.
Thanks
Regards
GSM

Was this working before? If yes, any changes have been done recently?
Did you compile the form successfully at the client side before uploading it to the server?
Did you use the TEMPLATE.fmb file to create this custom form?
Not sure what is the code you are using in that form, so posting it may help -- OERR: ORA 1003 no statement parsed [ID 18594.1]
Thanks,
Hussein

RE: Getting ORA-01003: no statement parsed error

Hi,
It looks familiar to some of the error which I encountered before. The
situation was a for ... select loop without explicit begin/end transaction.
The reason given by Forte consultant is that:
The dbsession used by the for ... select loop needed to be locked by a
begin/end transaction otherwise, there may be chances that the dbsession is
being acquired by some other sql that unknowingly corrupted the cursor
implicitly built for that for ... select loop.
Hopes this help.
Regards,
Peter Sham.
-----Original Message-----
From: Robinson, Richard [SMTP:[email protected]]
Sent: Friday, April 16, 1999 12:12 AM
To: '[email protected]'
Subject: Getting ORA-01003: no statement parsed error
Any clues? We're getting the following error on a server side
object that
interfaces to Oracle:
SYSTEM ERROR: Select failed for SQL statement in project xxxx, class
yyy,
method ...
error from database is: ORA-01003:no statement parsed
Class: qqdb_ResourceException
Detected at: qqdb_OracleVendorInfo::DoOexfet
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Somebody asked nearly the same question Re: EMERGENCY! pl/sql syntax error!!!

ORA-01003: there is not instruction analyzed

Similar Messages

Maybe you are looking for