ORA-01034 when trying to create a database

I successfully installed Oracle 8.1.7 on Solaris 8, but when I tried creating a database (by executing sql<SID>.sh after I ran "dbassist"), this error appeared:
ORA-01034: Oracle not available.
I could not use svrmgrl to do a startup because there is NO database.
What services have to run before I can create a database?
Thank you.
null

I chose "custom installation" and not to create a database during installation. There was no error when I installed the Oracle software and I modified the /etc/system (shmmax, shmmin, etc.) according to the Oracle documentation. After that, I used "dbassist" to create a database. Then the "ORA-01034: Oracle not available" appeared.
I also tried to install Oracle with "Typical" option that is suppose to create the initial database for me. It also failed. The same error appeared when the 'Database Configuration Tools' were trying to create the database files.

Similar Messages

ORA-03113 when trying to connect to database

RDBMS Version:: 9.2.0.6
Operating System and Version:: Win2003 Small Business Server
Error Number (if applicable):: ORA-03113
Server Net Version:: 9.2.0.6
Client Operating System and Version:: Solaris10
Client Net Version:: 2.1.3
ORA-03113 when trying to connect to database
I've currently a 7.1.3 client on SUN Solaris (5.10 Generic_118844-26 i86pc i386 i86pc) where I want to connect to the 9.2.0.6 database on a Win2003 Server hardware.
When i try to connect via SQL*Plus (Release 3.1.3.4.1), I get ORA-03113. Looking into the listener resp. alertfile on the server, I can see that the connectiorequest is recognized, but immediately answered by an ORA-0600, producing also trc-files.
listener: 25-MAI-2007 09:37:23 * (CONNECT_DATA=(SID=HTASQL)(CID=(PROGRAM=)(HOST=eklvpa)(USER=sat250))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.17.233.3)(PORT=32790)) * establish * HTASQL * 0
alert: ORA-00600: internal error code, arguments: [12333], [26], [0], [115], [], [], [], []
Activating traces on the client-side showed the following errors:
-<ERROR>- ntus2err: sd=8, op=1, resnt[0]=511, resnt[1]=2, resnt[2]=0
-<ERROR>- nserror: nsres: id=0, op=65, ns=12541, ns2=12560; nt[0]=511, nt[1]=2, nt[2]=0
-<ERROR>- nsopen: unable to open transport
-<ERROR>- nsprecv: transport read error
-<ERROR>- nserror: nsres: id=0, op=68, ns=12537, ns2=12560; nt[0]=507, nt[1]=0, nt[2]=0
-<ERROR>- osnqrc: wanted 1 got 0, type 0
-<ERROR>- osnqper: error from osnqrc
-<ERROR>- osnqper: nr err code: 0
-<ERROR>- osnqper: ns main err code: 12537
-<ERROR>- osnqper: ns (2) err code: 12560
-<ERROR>- osnqper: nt main err code: 507
-<ERROR>- osnqper: nt (2) err code: 0
-<ERROR>- osnqper: nt OS err code: 0
-<ERROR>- osnqsm: send-break: failed to send OOB break...
-<ERROR>- osnqper: error from send-marker
-<ERROR>- osnqper: nr err code: 0
-<ERROR>- osnqper: ns main err code: 12583
-<ERROR>- osnqper: ns (2) err code: 0
-<ERROR>- osnqper: nt main err code: 0
-<ERROR>- osnqper: nt (2) err code: 0
-<ERROR>- osnqper: nt OS err code: 0
-<ERROR>- osnqbr: returning 3113
Can anybody help me in determining the problem ? Is there a systemtic incompatibility in connecting a 7.1.3 client to a 9.2 (or even higher) database ?

Thanks for your reply.
But the funny thing on this compatibility issues is, that this configuration worked before. The only thing we did, was to setup the client-PC on a new hardware with also a new operating system (upgrading from Solaris 5.8 to 5.10). And from that time we encountered this problem.
Are there any OS-related problems known or better to say: is (was) ORACLE 7.1.3 supported on Solaris 5.10 ? Should we look for any patches which might help us ?

ORA-01450 when trying to create index on xmltype column

Hi,
I have a table that contains an xmltype column. It is a schema-based column and uses object-relational structured storage. When I tried to create an index like:
create index ssual_sipuser_idx on ssua_line (extractValue(ssual_configuration, '/ssuaLineApplication/sipUser'));
I got the following:
ORA-01450: maximum key length (3118) exceeded
The sipUser tag is of string type. I have also tried creating the index on the extract function.
create index ssual_sipuser_idx on ssua_line (ssual_configuration.extract('/ssuaLineApplication/sipUser/text()').getStringVal())
Gave me the same error message. My database block size is 4k. This is Oracle 9.2.0.4 running on Solaris.
Any help will be appreciated.
Thanks,
Gloria

Thanks for the reply, Coby.
My field is really small, probably around 10 bytes. Actually I've been testing on two servers, a 9201 and a 9204. I know that Oracle doesn't support XML DB on 9201 anymore but our company hasn't switched over yet. Anyways, here's really what I saw:
9201
- creating an index with extractValue() or extract() doesn't work
9204
- extractValue() works
- extract() still doesn't work
Now I'm using the substr() workaround. I should also mention that extractValue() with a numeric field works (using getNumberVal()).
I wonder if specifying the field length in the XML Schema would make a difference. I may try that next.

Ora-12154 when trying to connect to database from fortran application

I am trying to connect to database and run an simple select query to a table(without any where clause) using pro*fortran code.
the connect strng is like
exec sql connect :uidpwd
where uidpwd = username/password@SID
SID and tnsnames connect string are the same.
The fortran (profortran) code is placed in the database server and there are no errors when make is run.
Tnsping is working fine, also i am able to conect using sql*plus and run the same query.
Please help
Thanks and Regards
Nitin

Hi Nitin
Thanks for the helpful! With your point I'm now Pro! Great thanks.
By the way have your seen that?
Files such as LISTENER.ORA, TNSNAMES.ORA, SQLNET.ORA, if configured manually, or copied and edited from earlier releases of Oracle Database may have record attributes that are incompatible with Oracle Database 10g release 2. The software cannot read such files. The required record format is stream_lf and the record attributes are carriage_control and carriage_return.
This may result in:
Inability to start the listener
Services not registered with the listener
Inability to connect to other databases
ORA-12154: TNS:could not resolve service name
Run the following command on each file affected:
$ DIR/FULL filename
An output similar to the following may be displayed:
Record format: Variable length, maximum 255 bytes
Record attributes: Carriage return carriage control
If the output includes the preceding entries, then run the following command:
$ CONVERT/FDL=SYS$INPUT filename filename
RECORD
CARRIAGE_CONTROL CARRIAGE_RETURN
FORMAT STREAM_LF
^Z
Otherwise herewith an interesting metalink note. Doc ID: Note:437597.1
Subject: Ora-12154 When Executing Pro*Fortran Code Compiled With Oracle 10g.
Hope this will also help you...
Cheers
Hubert

Ora-01194 when trying to open a database

Hi folks,
I am trying to move a database from one production server(oracle 9.2 using RAC) to a test server(Oracle 9.2 stand alone server), but some error is occurring..
What I done was
1 - shutted down production server
2 - copied dbf files to test server
3 - started production server
4 - created a test db on other server with same physical structure that prodution server has. It means that I maintained tablespaces and datafiles names.
5 - shutted down test db
6 - copied production dbf files to oradata directories
7 - recreated controlfile. until now, everything worked fine, but on next step I got error message ORA-01194
8 -
SQL> ALTER DATABASE OPEN RESETLOGS;
ALTER DATABASE OPEN RESETLOGS
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'O:\CDCHOM\ORADATA\SYSTEM01.DBF'
could anyone help me with that?
Thank you
Alex

I guess that I have to copy just datafiles, not including undo and tempfiles.
Redo files and control files are recreated with CREATE CONTROLFILE statement.
temp and undo tablespaces are recreated after control file is recreated.
For this process works file, does oracle releases must be the same for both servers?
My configurations are:
PRODUTION SERVER (using Oracle RAC)
OS : windows 2003, sp1
ORACLE :
SQL> SELECT * FROM V$VERSION;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
PL/SQL Release 9.2.0.5.0 - Production
CORE 9.2.0.6.0 Production
TNS for 32-bit Windows: Version 9.2.0.5.0 - Production
NLSRTL Version 9.2.0.5.0 - Production
TEST SERVER
OS : windows 2003, sp1
ORACLE :
SQL> SELECT * FROM V$VERSION;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
PL/SQL Release 9.2.0.1.0 - Production
CORE 9.2.0.1.0 Production
TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
NLSRTL Version 9.2.0.1.0 - Production

ORA-25175 when trying to create materialized view, organization index SOLV

Hi,
I'm trying to create a materialized view to compensate for non-normalized table.
I have table anormal, and mv is to be on distinct agency, company in that table.
Here goes:
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.3.0 - Productio
NLSRTL Version 10.2.0.3.0 - Production
SQL> create table anormal (company varchar2(8) not null
2                       ,dept varchar2(8) not null
3                       ,agency varchar2(8) not null
4                       ,constraint anormal_pk primary key (company,dept));
Table created.
SQL> insert into anormal values('c1', 1, 'Ajax');
1 row created.
SQL> insert into anormal values('c1', 2, 'Ajax');
1 row created.
SQL> insert into anormal values('c1', 3, 'Acme');
1 row created.
SQL> insert into anormal values('c2', 1, 'Acme');
1 row created.
SQL> insert into anormal values('c2', 2, 'Acme');
1 row created.
SQL> commit;
Commit complete.
SQL> select * from anormal;
COMPANY DEPT     AGENCY
c1       1        Ajax
c1       2        Ajax
c1       3        Acme
c2       1        Acme
c2       2        Acme
SQL> create materialized view agency_comp_mv
2 organization index --primary key (agency, company)
3 build deferred
4 refresh on demand
5 as
6 select distinct agency, company from anormal
7 /
select distinct agency, company from anormal
ERROR at line 6:
ORA-25175: no PRIMARY KEY constraint found
SQL>The error tells me that there is no primary key, but is there any way to add such?
- or is my problem rather that I cannot use DISTINCT with organization index?
Regards
Peter
bump
Message was edited by:
Peter Gjelstrup
<SOLVED>
Message was edited by:
Peter Gjelstrup

Thanks William,
I tried with ON PREBUILT TABLE, just to see what happens.
Building on my OP:
SQL> create table iot(agency varchar2(8) not null, company varchar2(8) not null
2                  ,constraint iot_pk primary key (agency,company))
3 organization index;
Table created.
SQL> insert into iot select distinct agency, company from anormal;
4 rows created.
SQL> commit;
Commit complete.
SQL> create materialized view iot on prebuilt table
2 as
3 select distinct agency, company from anormal;
Materialized view created.
SQL> select * from iot;
AGENCY   COMPANY
Acme     c1
Acme     c2
Ajax     c1
SQL> insert into anormal values('c3', 2, 'Foo');
insert into anormal values('c3', 2, 'Foo')
1 row created
SQL> select * from anormal;
COMPANY DEPT     AGENCY
c1       1        Ajax
c1       2        Ajax
c1       3        Acme
c2       1        Acme
c2       2        Acme
c3       2        Foo
6 rows selected.
SQL> select * from iot;
AGENCY   COMPANY
Acme     c1
Acme     c2
Ajax     c1
3 rows selectedNow, try to refresh and MV
SQL> alter materialized view iot refresh complete;
Materialized view altered.
SQL> select object_type, to_char(last_ddl_time, 'hh:mi:ss'), status
2    from user_objects where object_name = 'IOT';
OBJECT_TYPE         DDL_TIME STATUS
TABLE               10:40:42 VALID
MATERIALIZED VIEW   10:41:13 VALID
SQL> select * from iot;
AGENCY   COMPANY
Acme     c1
Acme     c2
Ajax     c1Agency "Foo" is not in MV,
Looks like that IOT select'ed from is indeed the MV:
SQL> drop table iot;
drop table iot
ERROR at line 1:
ORA-12083: must use DROP MATERIALIZED VIEW to drop "STIK"."IOT"
SQL>So, seems that Maxim is right, it just can't be done. And it seems my options are:
Create HEAP organized MV or
Create and maintain IOT
Regards
Peter

ORA-12054 when trying to create an MV

10gR2
I'm trying to create an MV, but is failing with the mentioned error. I've tried to search for the reason(s), but cannot seem to find it. Can somebody help? Thanks.
create materialized view MV_POC
build immediate
refresh on commit
enable query rewrite
as
SELECT
SRBU.SRV_REQ_ID as SRID,
ORGNZ.NAME as DIVISION ,
SRVRQ.CREATED as OPENED,
SRVRQ.SR_SUBTYPE_CD as SOURCE,
USR.LOGIN as OWNER
FROM SIEBEL.S_PARTY PRTY,
SIEBEL.S_ORG_EXT ORGNZ,
SIEBEL.S_SRV_REQ_BU SRBU,
SIEBEL.S_BU BU,
SIEBEL.S_SRV_REQ SRVRQ,
SIEBEL.S_USER USR
WHERE SRVRQ.ROW_ID = SRBU.SRV_REQ_ID (+)
AND
SRVRQ.OWNER_EMP_ID = USR.PAR_ROW_ID (+)
AND
( PRTY.ROW_ID = ORGNZ.PAR_ROW_ID AND PRTY.ROW_ID = BU.PAR_ROW_ID AND SRBU.BU_ID = PRTY.ROW_ID)
AND (ORGNZ.INT_ORG_FLG = 'Y' AND BU.BU_FLG = 'Y')
AND (ORGNZ.PAR_BU_ID = (SELECT ROW_ID FROM SIEBEL.S_ORG_EXT WHERE NAME = 'State of Washington')))

From the documentation you failed to search
ORA-12054 cannot set the ON COMMIT refresh attribute for the materialized view
Cause: The materialized view did not satisfy conditions for refresh at commit time.
Action: Specify only valid options.
Those valid conditions are likely documented, and likely they have to do with the numerous outer joins, maybe on primary key columns, may be not.
Most views must be 'key-preserved' to be updatable.
Sybrand Bakker
Senior Oracle DBA

ORA-06502 when trying to create a web service reference

Hi,
I want to create a reference to mail a report from BI Publisher.
Apparently the e-mail option is no longer available in the v2 webservices so I tried to create a web service reference to:
.../xmlpserver/services/PublicReportService?wsdl
I had no problems creating references to the v2 web services however I don't manage to create a reference for this WSDL.
The last step gives me:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Thanks for tips or advice.
Other workarounds to email a report are welcome as well. I tried to use the v2 webservices runReport & scheduleReport before but they don't seem to support this.
Thanks!

Okay, so email is available in the v2 webservices I found out. (despite stated in many blogpost it is not)
--- ScheduleService
If you're going to use it to send emails you need to create your webservice manually. Otherwise it will not work as the scheduleReport also can print, fax or save your report to webdav and you will need to remove these elements from you soapenveloppe to get it to work.
This is not possible with the services created using the WSDL wizard.

ORA-12705 when trying to connect to database

I am trying to install SQL Developer on a user PC in my company, but when the user tries to connect to a database he gets the following error message:
An error was encountered performing the requested operation:
ORA-00604: error occurred at recursive SQL level 1
ORA-12705: Cannot access NLS data files or invalid environment specified
0604. 00000 - "error occurred at recursive SQL level %s"
*Cause: An error occurred while processing a recursive SQL statement
(a statement applying to internal dictionary tables).
*Action: If situation described in the next error on the stack
can be corrected, do so; otherwise contact Oracle Support.
Vendor code 604
I have tried searching this forum and the rest of the web for this error, and I have tried all the tips that I have found, but nothing seems to work for me, I get the same error message every time. Most of the tips have been centered around the NLS_LANG parameter. Does anybody have a suggestion?

I have already seen this document and tried it out, but it didn't work. And I have tried out numerous other tips that I have found in different places on the web.
Is the client installation of any relevance? I notice that this user has a different installation from the one that I have, and that he amongst other things doesn't have sql plus installed.

RAC: ocfs-option disabled when trying to create database with dbca.

Hi everybody,
I have a really weird problem running dbca in my 2-node RAC installation on Red Hat ES.
The software version of both oracle clusterware and rdbms is 10.2.0.2.0, meaning the latest patchset has been applied.
I have installed and configured ocfs, and 4 different ocfs-partition are neatly presented to the operating system. I can save files and browse the ocfs file system, everything seems to be working fine.
Also, srvctl status nodeapps -n <nodename> shows that oracle clusterware is running nicely, all the components are up including the listener, which I used netca to configure.
However, when trying to create a cluster database using dbca, the option to use ocfs is not enabled, e.g it is "grayed out" in the Oracle Universal installer. So is raw devices option. The only option left is the ASM, which is selectable in the OUI.
In addition, I can indeed run scripts manually and create a single-instance database and use the ocfs-partitions for the datafiles, redo logs and archivelogs. No problems at all!
Do any of you guys have the slightest clue what can be causing this behaviour? Of course I have raised an issue with Oracle Support, but while waiting for an update, it doesn't hurt trying the forum.
I appreciate all suggestions, thanks for taking the time to read my posting.
Best Regards,
Vegard

You were right.
http://download-uk.oracle.com/docs/html/B14203_05/intro.htm#sthref44
under the section
"1.3 Configuration Tasks for Oracle Clusterware and Oracle Real Application Clusters"
"... If you use RAC on Oracle Database 10g Standard Edition, then you must use ASM."
Thanks, problem solved.
- Vegard

Ora 12154 error when trying to add a database to VS Server Explorer

Hi Everyone,
I get the Ora 12154 error when trying to add a database to VS Server Explorer.
How do I get around this problem.
The database service is running and I can connect to the database with pl/sql.
I can also tnsping the database and that is also ok.
Looks like a problem with the odp.net software.
I am running the 32 bit Oracle 11g on a Windows7 Home Premium 64 bit PC.
I am new to this stuff so please help me step by step.
Thanks.
Emad

Hi J. B.
I have a question related to this. After you told me about the //host:1521/database alias I tried it in a VB 2008 program and it worked and returned data. At least I know that it can be used in a VB program without issues. I just now need to be able to add a connection with the Server Explorer.
Anyway here is the VB coding I used. I'm new to this and still learning:
Imports Oracle.DataAccess.Client ' Visual Basic ODP.NET Oracle managed provider
Public Class Form1
' String to connect to the database.
Dim strConnectionString As String = _
"Data Source=//emad-pc:1521/emadeva;User ID=scott;Password=tiger;" '
' Associate the connection string with a connection object.
Dim objOracleConnection As New OracleConnection(strConnectionString)
' SQL query for returning data rows.
Dim strSqlQuery As String = _
"Select dname, deptno " & _
"From dept " & _
"Where deptno = 10" '
' Command object to make this query work.
Dim objOracleCommand As New OracleCommand(strSqlQuery, objOracleConnection)
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
' Identify what type of command is being used.
objOracleCommand.CommandType = CommandType.Text
Try
objOracleConnection.Open()
' Set up a Data Reader and load it with data.
Dim objOracleDataReader As OracleDataReader = _
objOracleCommand.ExecuteReader()
objOracleDataReader.Read()
' Convert the department number to a string.
lblDepartmentNumberFromOracle.Text = _
CStr(objOracleDataReader.Item("deptno"))
Catch ex As Exception
MessageBox.Show(ex.Message, "Error")
End Try
End Sub
End Class
I still want to thank you for the help you are providing.
Truly,
Emad

Logical standby stopped when trying to create partitions on primary(Urgent

RDBMS Version: 10.2.0.3
Operating System and Version: Solaris 5.9
Error Number (if applicable): ORA-1119
Product (i.e. SQL*Loader, Import, etc.): Data Guard on RAC
Product Version: 10.2.0.3
logical standby stopped when trying to create partitions on primary(Urgent)
Primary is a 2node RAC ON ASM, we implemented partitions on primar.
Logical standby stopped appling logs.
Below is the alert.log for logical stdby:
Current log# 4 seq# 860 mem# 0: +RT06_DATA/rt06/onlinelog/group_4.477.635601281
Current log# 4 seq# 860 mem# 1: +RECO/rt06/onlinelog/group_4.280.635601287
Fri Oct 19 10:41:34 2007
create tablespace INVACC200740 logging datafile '+OT06_DATA' size 10M AUTOEXTEND ON NEXT 5M MAXSIZE 1000M EXTENT MANAGEMENT LOCAL
Fri Oct 19 10:41:34 2007
ORA-1119 signalled during: create tablespace INVACC200740 logging datafile '+OT06_DATA' size 10M AUTOEXTEND ON NEXT 5M MAXSIZE 1000M EXTENT MANAGEMENT LOCAL...
LOGSTDBY status: ORA-01119: error in creating database file '+OT06_DATA'
ORA-17502: ksfdcre:4 Failed to create file +OT06_DATA
ORA-15001: diskgroup "OT06_DATA" does not exist or is not mounted
ORA-15001: diskgroup "OT06_DATA" does not exist or is not mounted
LOGSTDBY Apply process P004 pid=49 OS id=16403 stopped
Fri Oct 19 10:41:34 2007
Errors in file /u01/app/oracle/admin/RT06/bdump/rt06_lsp0_16387.trc:
ORA-12801: error signaled in parallel query server P004
ORA-01119: error in creating database file '+OT06_DATA'
ORA-17502: ksfdcre:4 Failed to create file +OT06_DATA
ORA-15001: diskgroup "OT06_DATA" does not exist or is not mounted
ORA-15001: diskgroup "OT06_DATA" does not exist or
Here is the trace file info:
/u01/app/oracle/admin/RT06/bdump/rt06_lsp0_16387.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /u01/app/oracle/product/10.2.0
System name: SunOS
Node name: iscsv341.newbreed.com
Release: 5.9
Version: Generic_118558-28
Machine: sun4u
Instance name: RT06
Redo thread mounted by this instance: 1
Oracle process number: 16
Unix process pid: 16387, image: [email protected] (LSP0)
*** 2007-10-19 10:41:34.804
*** SERVICE NAME:(SYS$BACKGROUND) 2007-10-19 10:41:34.802
*** SESSION ID:(1614.205) 2007-10-19 10:41:34.802
knahcapplymain: encountered error=12801
*** 2007-10-19 10:41:34.804
ksedmp: internal or fatal error
ORA-12801: error signaled in parallel query server P004
ORA-01119: error in creating database file '+OT06_DATA'
ORA-17502: ksfdcre:4 Failed to create file +OT06_DATA
ORA-15001: diskgroup "OT06_DATA" does not exist or is not mounted
ORA-15001: diskgroup "OT06_DATA" does not exist or
KNACDMP: *******************************************************
KNACDMP: Dumping apply coordinator's context at 7fffd9e8
KNACDMP: Apply Engine # 0
KNACDMP: Apply Engine name
KNACDMP: Coordinator's Watermarks ------------------------------
KNACDMP: Apply High Watermark = 0x0000.0132b0bc
Sorry our primary database file structure is different from stdby, we used db_file_name_convert in the init.ora, it look like this:
*.db_file_multiblock_read_count=16
*.db_file_name_convert='+OT06_DATA/OT06TSG001/','+RT06_DATA/RT06/','+RECO/OT06TSG001','+RECO/RT06'
*.db_files=2000
*.db_name='OT06'
*.db_recovery_file_dest='+RECO'
Is there any thing wrong in this parameter.
I tried this parameter before for cloning using rman backup. This din't work.
What exactly must be done? for db_file_name_convert to work.
Even in this case i think this is the problem its not converting the location and the logical halts.
help me out.....
let me know if you have any questions.
Thanks Regards
Raghavendra rao Yella.

Hi reega,
Thanks for your reply, our logical stdby has '+RT06_DATA/RT06'
and primary has '+OT06_DATA/OT06TSG001'
so we are using db_file_name_convert init parameter but it doesn't work.
Is there any thing particular steps hiding to use this parameter? as i tried this parameter for rman cloning it din't work, as a workaround i used rman set new name command for clonning.
Let me know if you have any questions.
Thanks in advance.

IPhoto crashes when trying to create a calendar

Hello,
My iPhoto application crashes when trying to create a calendar. Actually, it just freezes.
Any suggestions? I'm running 10.7 on a MacBook Pro.

what version of iPHoto?
Try Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN

My CPU usage upto 99% when trying to create admin acount in Magento.

It has been almost 2 days by now i have been trying to install Magento in MAMP server.
Majento installs database tables sucessfully then when trying to create a admin account for Magento it stucks ... and hungs up the browser..
I am using MAMP , PHP 5.3.5 safari web browser and when see the activity monitor i found httpd --99% cpu usage.
Why is this happening?
Can't i install Magento in Macbook Pro? is this the limitation on MAC?
I have lost 2 days by now...Not found any solution...
Is Windows the solution Now?

Have you tried Magento support forums?
http://www.magentocommerce.com/boards/viewthread/2137/

DataSource CORP_LDAP: Naming exception when trying to create principal

Using NetWeaver 6.40 SP 15.
I have configured the UME to use writable LDAP and database. Specifically, for LDAP I'm using the Sun One Directory Server. I'm able to authenticate using one of the LDAP users using a Web Dynpro app.
When I try to create a user through the NWA web app, I simply get a "Could not create user" error in the application. In the server instance "security.log" I found the following:
Date : 03/08/2006
Time : 16:22:59:248
Message : DataSource CORP_LDAP: Naming exception when trying to create principal ***************************************************************************
com.sap.security.core.persistence.imp.PrincipalDatabagMaint Wed Mar 08 16:22:59 CST 2006
UniqueID: USER.CORP_LDAP.testuser
Type: USER
Home data source: CORP_LDAP
Private id part: testuser
"com.sap.security.core.usermanagement"|->"uniquename" (no time limit)="testuser"
"com.sap.security.core.usermanagement"|->"department" (no time limit)="CI&T"
"com.sap.security.core.usermanagement"|->"PRINCIPAL_CREATION_DATE" (no time limit)="0001141856579248"
"com.sap.security.core.usermanagement"|->"firstname" (no time limit)="user"
"com.sap.security.core.usermanagement"|->"lastname" (no time limit)="test"
"com.sap.security.core.usermanagement"|->"PRINCIPAL_TYPE_ATTRIBUTE" (no time limit)="USER"
"com.sap.security.core.usermanagement"|->"email" (no time limit)="[email protected]"
"com.sap.security.core.usermanagement"|->"company" (no time limit)=""
"com.sap.security.core.usermanagement"|->"accessibilitylevel" (no time limit)="0"
Severity : Error
Category : /System/Security/Usermanagement
Location : com.sap.security.core.persistence
Application : sap.com/com.sap.security.core.admin
Thread : SAPEngine_Application_Thread[impl:3]_22
Datasource : 1141856104605:C:\usr\sap\J2E\JC00\j2ee\cluster\server0\log\system\security.log
Message ID : 000D60DD8A4D00540000001C0000136000040E8333C9FD7C
Source Name : /System/Security/Usermanagement
Argument Objs : CORP_LDAP,***************************************************************************
com.sap.security.core.persistence.imp.PrincipalDatabagMaint Wed Mar 08 16:22:59 CST 2006
UniqueID: USER.CORP_LDAP.testuser
Type: USER
Home data source: CORP_LDAP
Private id part: testuser
"com.sap.security.core.usermanagement"|->"uniquename" (no time limit)="testuser"
"com.sap.security.core.usermanagement"|->"department" (no time limit)="CI&T"
"com.sap.security.core.usermanagement"|->"PRINCIPAL_CREATION_DATE" (no time limit)="0001141856579248"
"com.sap.security.core.usermanagement"|->"firstname" (no time limit)="user"
"com.sap.security.core.usermanagement"|->"lastname" (no time limit)="test"
"com.sap.security.core.usermanagement"|->"PRINCIPAL_TYPE_ATTRIBUTE" (no time limit)="USER"
"com.sap.security.core.usermanagement"|->"email" (no time limit)="[email protected]"
"com.sap.security.core.usermanagement"|->"company" (no time limit)=""
"com.sap.security.core.usermanagement"|->"accessibilitylevel" (no time limit)="0"
Arguments : CORP_LDAP,***************************************************************************
com.sap.security.core.persistence.imp.PrincipalDatabagMaint Wed Mar 08 16:22:59 CST 2006
UniqueID: USER.CORP_LDAP.testuser
Type: USER
Home data source: CORP_LDAP
Private id part: testuser
"com.sap.security.core.usermanagement"|->"uniquename" (no time limit)="testuser"
"com.sap.security.core.usermanagement"|->"department" (no time limit)="CI&T"
"com.sap.security.core.usermanagement"|->"PRINCIPAL_CREATION_DATE" (no time limit)="0001141856579248"
"com.sap.security.core.usermanagement"|->"firstname" (no time limit)="user"
"com.sap.security.core.usermanagement"|->"lastname" (no time limit)="test"
"com.sap.security.core.usermanagement"|->"PRINCIPAL_TYPE_ATTRIBUTE" (no time limit)="USER"
"com.sap.security.core.usermanagement"|->"email" (no time limit)="[email protected]"
"com.sap.security.core.usermanagement"|->"company" (no time limit)=""
"com.sap.security.core.usermanagement"|->"accessibilitylevel" (no time limit)="0"
Dsr Component : <masked id>_J2E_7234450
Dsr Transaction : 79521ee0aef011da9168000d60dd8a4d
Dsr User : Administrator
Indent : 0
Level : 0
Message Code :
Message Type : 1
Relatives : com.sap.security.core.persistence
Resource Bundlename :
Session : 200
Source : /System/Security/Usermanagement
ThreadObject : SAPEngine_Application_Thread[impl:3]_22
Transaction :
User : Administrator
Where can I find the initial NamingException?

Hi All,
Thanks for your replies and SORRY for my late response.
Now, what I actually want is that though my UME is connected to LDAP i want to the portal admin to be able to create users in the portal DB. I checked my UME configuration and it says
Microsoft ADS (Deep Hheirarchy) + Database
and the name of the configuration file is
dataSourceConfiguration_ads_deep_writeable_db.xml
Now I could not understand why I am not able to create users in the DB?
Does the portal has any restriction like at any given point of time only one of the user stores can be active? Doesnt the portal allow both the user stores to be active at a time?
regards,
PK

ORA-01034 when trying to create a database

Similar Messages

Maybe you are looking for