ORA-01114: IO error writing block
What is the best way to recover from error :
Wed Nov 22 21:44:01 2006
Errors in file c:\oracle\admin\orcl\bdump\orcl_dbw0_3932.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01114: IO error writing block to file 65 (block # 260237)
ORA-01110: data file 65: 'C:\ORADATA\ORCL\RG_IDX_16.ORA'
ORA-27072: skgfdisp: I/O error
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 1) Incorrect function.
DBW0: terminating instance due to error 1242
Instance terminated by DBW0, pid = 3932
The basic meaning of this error stack is DB writer is unable to write to the mentioned datafile. There could be logical or physical corruption (hardware failure) or another process blocks this datafile. In the latter case the problem should be temporarily,
1) shutdown the database
2) run chkdsk (to check for disk failures)
3) startup the database
If the error persists you have to restore/recover from a backup. Since the database is running in noarchivelog mode this can only be done from a cold backup, which means probably loss of data.
Werner
Similar Messages
-
hi
When I run report in rsrt it is throwing me following error..
Messages:
ORA-01114: IO error writing block to file (block # )
SQL Error: 1114
Error while reading data; navigation is possible
>> Row: 71 Inc: NEXT_PACKAGE Prog: CL_SQL_RESULT_SET
we have tried all the options
increased the table space of temp files but still the issue is not resolved
one thing we have observed is
1 case which we are seeing (not sure if this is only because of the below case)
we see this error specifically when we run query on our infocube ZWBS_C11 (CUSTOMIZED CUBE) which has MANDATORY VARIABLE ON 0PROJECT
do this variable has anything to do with the error..
because in other cases where we have like 5 reports on same infocube..
we dont see this error in other 2 cases where we dont have this mandatory variable on project
also we see this error in several other cases like when we are doing compression of info cube zic_c03
absolutely no clue of why this is happening..and when this is happening
RegardsHi,
This issue is related Oracle database issue, check with Basis/Dba team. Oce they resolved you can run the report with selections.
If you know the table name you can check in SE14 (Data base Utility) and adjust the table. Some times it will work out.
Hope it helps you.
Riyez -
ORA-01114: IO error writing block to file
I am trying to create an index on a RAC database. I have tried this in two different schemas with two different tablespaces. I am not getting the standard "unable to extend segment" when you are out of space. I get:
Tried creating an index:
ERROR at line 1:
ORA-00603: ORACLE server session terminated by fatal error
I actually lose connection to the database.
I checked udump and I get:
ksedmp: internal or fatal error
ORA-01114: IO error writing block to file 500 (block # 625225)
ORA-27072: File I/O error
Linux-x86_64 Error: 28: No space left on device
Additional information: 4
Additional information: 625225)
Additional information: -1
1. I have 525 GBs of free space in one of my tablespace which is plenty
2. I was able to create a new table and copy the data from the existing table. Just getting the problem with creating indexes.
I do not have a file_id 500, so I guess that is an OS file number.Hi,
Your temporary tablespaces datafiles are ok? sometimes this kind of errors arise from those files:
1) Index creation , implies sorting ...therefore temporary usage
2) Cannot find the file number within dba_data_files
The (possible) reason for this, resides at the way temporary datafiles are structured: they don't allocate all disk space at creation time, like other datafiles.
For instance, you have a filesystem with 300Mb free, and you declared a 200Mb temporary datafile, check if it will have 100Mb or 300Mb freespace (Unix bdf/Linux df -k)? ... it's puzzling... if you later redefine size for temporary , adding 150Mb , the database will allow you to do that... cause it's not allocating the space, it will use the space when temporary space is required, and you'll be in troubles passing the 300Mb barrier... just at 300 Mb + 512bytes you're out of space.
Regards
Ignacio
http://oracledisect.blogspot.com -
ORA-01114: IO error writing block to file %s (block # %s)
One of my large query (has a large amount of sort) fails with the following error.
ORA-01114: IO error writing block to file %s (block # %s).
Uses Oracle 9.2 on windows 2000 server. The size of the TEMPORARY file increases and stops at 4.2 GB. This was the default TEMP file created by oracle at the time of installation. I have another 10GB of free space available on this drive (where the TEMP file exists). Information in DBA_TEMP_FILES table is given below.
Thanks in advance for helps.
Paul.
FILE_ID TABLESPACE_NAME BYTES BLOCKS STATUS RELATIVE_FNO AUT MAXBYTES MAXBLOCKS INCREMENT_BY USER_BYTES USER_BLOCKS
1 TEMP 4294967296 524288 AVAILABLE 1 YES 34359721984 4194302 1 4293918720 524160Filesystem 1k-blocks Used Available Use% Mounted on
/dev/sda2 4127108 200124 3717336 6% /
/dev/sda1 46636 14166 30062 33% /boot
none 513884 0 513884 0% /dev/shm
/dev/sda3 11052880 5697800 4793612 55% /usr
/dev/sda6 256667 37742 205673 16% /var
/dev/sdb1 35001508 33223516 0 100% /u01
/dev/sdc1 35001508 137340 33086176 1% /u02
/dev/sdd1 35001508 19748484 13475032 60% /u03
/dev/sde1 35001508 32844 33190672 1% /u04
In the /u01 are temp01.dbf (11.039.416.320) and undotbs01.dbf (2.422.218.752) located. Can I delete or truncate the temp01 file to make space on the device or not? -
ORA-01114: IO error writing block to file 101 (block # 376038) in create in
Hi
I have srange problem with create index
I have database 10.2.0.4 on HPUX
I tried to create index :
CREATE INDEX "MIGRACE"."R111800_IX1" ON "MIGRACE"."R111800" ("SPARTE", "KONR")
5 TABLESPACE "MIGR" ;
ORA-01114: IO error writing block to file 101 (block # 376038)
ORA-27072: File I/O error
HPUX-ia64 Error: 5: I/O error
Additional information: 4
Additional information: 376038
Additional information: -1
ORA-01114: IO error writing block to file 101 (block # 376038)
table "MIGRACE"."R111800" is ok , is readable and doesn't have any LOB
SPARTE VARCHAR2(4)
KTONR VARCHAR2(11)
SUBNR VARCHAR2(1)
TXTGRP VARCHAR2(8)
PRODMON VARCHAR2(6)
WERT NUMBER(13,2)
I don't have in database file number 101 , all datafile are noextensible , can You help me where could be peoblwm ?
Thank You
Branobranislav.dobrotka wrote:
Hi
I have srange problem with create index
I have database 10.2.0.4 on HPUX
I tried to create index :
CREATE INDEX "MIGRACE"."R111800_IX1" ON "MIGRACE"."R111800" ("SPARTE", "KONR")
5 TABLESPACE "MIGR" ;
ORA-01114: IO error writing block to file 101 (block # 376038)
ORA-27072: File I/O error
HPUX-ia64 Error: 5: I/O error
Additional information: 4
Additional information: 376038
Additional information: -1
ORA-01114: IO error writing block to file 101 (block # 376038)
table "MIGRACE"."R111800" is ok , is readable and doesn't have any LOB
SPARTE VARCHAR2(4)
KTONR VARCHAR2(11)
SUBNR VARCHAR2(1)
TXTGRP VARCHAR2(8)
PRODMON VARCHAR2(6)
WERT NUMBER(13,2)
I don't have in database file number 101 , all datafile are noextensible , can You help me where could be peoblwm ?
Thank You
BranoOracle is victim; not culprit.
OS error.
is disk volume full?
any clues in OS messages file? -
IO error writing block to file (Apex 4.01, 11gR2, RH 64 bit & Using Gatew
I have Apex 4.01 running on a Linux Red Hat 64 bit server and the database is 11gR2. I'm using the gateway and receiving numerous io errors on files that do not exist in the database. Has any one else experienced this? Should I scrape the gateway and load https ?
File 201 does not exists in the database (error below). I have verified this the files do not exists using ( dba_data_files or dba_temp_files) . Is this a Gateway issue?
I have run dbverify and there are not corruptions within in the database. We have run a disk check on the SAN and there are not issues either.
Example of Error:
===========
</msg>
<msg time='2010-11-09T16:18:25.446-06:00' org_id='oracle' comp_id='rdbms'
client_id='ADMIN:1753485708135952' type='UNKNOWN' level='16'
host_id='houlnxora01d.nblenergy.com' host_addr='10.10.200.26' module='APEX:APPLICATION 4500'
pid='26431'>
<txt>Errors in file /u01/app/oracle/diag/rdbms/bdapx01d/bdapx01d/trace/bdapx01d_s000_26431.trc:
ORA-01114: IO error writing block to file 201 (block # 36609)
ORA-27072: File I/O error
Linux-x86_64 Error: 9: Bad file descriptor
Additional information: 4
Additional information: 36609
Additional information: -1
</txt>
</msg>Hello,
I think this is a database-related problem which also occurs when using APEX, but I don't think it's caused by APEX.
The error basically says that something is wrong with your filesystem.
I suggest you post this error description to the forum where the experienced dbas could help you more: {forum:id=61}
From what I know, these errors may occur when your filesystem is full or the file was deleted/moved or set offline for some other reason.
You could get a hint for troubleshooting by locating the file on your filesystem:
select file_name
from dba_data_files
where file_id=201;If it actually doesn't exist, something has messed up your data dictionary. You could then try to find out which tablespace and object/s have a hold on that file:
select
owner,
tablespace_name,
segment_type,
segment_name
from
dba_extents
where
file_id = 201
and
block_id = 36609;I hope it's just the "disk full"-case.
-Udo -
Export with Table Splitting : ORA-01115: IO error reading block from file
Hello,
We are in perfroming the last dryrun of our CU&UC conversion.
The are now in the process of exporting the ECC6 system (Oracle 10.2.0.4.0, HPUX ia64) using sapinst features, "table splitting preparation"
When doing so, we are facing critical errors :
Creating file /export_uni/sapinst_splitting/ora_query3_tmp3_1.sql.
ERROR 2010-08-11 10:27:28.881
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-12801: error signaled in parallel query server P002
ORA-01115: IO error reading block from file 90 (block # 16640)
ORA-27072: File I/O error
HPUX-ia64 Error: 22: Invalid argument
Additional information: 4
Additional information: 16640
Additional information: -1
ORA-01115: IO error reading block from file 90 (block # 16640)
ORA-27072: File I/O error
HPUX-ia64 Error: 22: Invalid argument
ORA-06512: at "SAPR3.TABLE_SPLITTER", line 775
ORA-06512: at line 1
I have therefore perfmed a dbverify ; no corruption has been recorded.
When trying to perfrom the EXPORT, without table splitting ; it works fine ...but the processing time is extremely long, as you can imagine. Any help would be highly appreciated.Regards.
RaoulThank you Stefan,
Our HPUX Release seems to be indeed 11v3,
[root@:/root]# uname -a
HP-UX B.11.31 U ia64 2566039091 unlimited-user license
I'll check the installation of the patch and keep you informed
Thank you
Raoul
Edited by: Raoul Shiro on Aug 11, 2010 11:57 AM -
Expdp fails with error ORA-39006: internal error writing on a windows share
Hi!
I need to get the following configuration working:
Linux Server (CentOS 5 32 bits) with Oracle 11.2.0.1.0
Windows Server 2003 SP2 32 bits.
On the windows server I have created a user called oracle, who is member of oinstall and dba groups. (On Linux username, and group membership is the same).
After that, I share a directory on D:\data_pump (I gave the full control of directory to oracle user). I mount the windows share on my linux as follows:
mount -t cifs //winserver/data_pump /u04/oradata/data_pump -o user=oracle,password="pass",uid=oracle,gid=oinstall
As the linux oracle user I'm capable of create and edit files, but:
I connect to my database, create the directory called DATA_PUMP pointing to my cifs mount point, and, after that, I issue the following expdp sentence:
expdp system DIRECTORY=DATA_PUMP DUMPFILE=test4.dmp LOGFILE=test4.log FULL=yes
And I get the following error:
ORA-39006: internal error
Looking at expdp log I found the following information:
ORA-39097: Data Pump job encountered unexpected error -31643
ORA-39065: unexpected master process exception in FILE
ORA-31643: unable to close dump file "/u04/oradata/data_pump/gaston4.dmp"
ORA-19510: failed to set size of 1 blocks for file "/u04/oradata/data_pump/gaston4.dmp" (block size=4096)
ORA-27045: unable to close the file
Linux Error: 5: Input/output error
Additional information: 4
Do you have any suggestions?
Thanks in advance.Hi, see metalink:
Bug 8313127: EXPDP EXPORT TO CIFS MOUNT ON WINDOWS FROM LINUX FAILS
http://kr.forums.oracle.com/forums/thread.jspa?threadID=923398 -
ORA-01110,ORA-01114,ORA-27063 error
I am running oracle 10.2.0.1.0 on Solaris 10 OS on Sparc machine.
My oracle server often goes shutdown when i am performing the update operation on different tables. I could not understand the reason for its shutdown. According to log file, error occurred due to media failure but disk was fine and on starting up the oracle instance, every thing became fine. Can anybody kindly, tell me the reason for its shutdown ?
Following is the info of log file.
Thread 1 advanced to log sequence 1414
Current log# 3 seq# 1414 mem# 0: /datafiles/mqa/redo03.log
Thu Apr 3 15:49:42 2008
Errors in file /u01/app/oracle/product/10.2.0/admin/mqa/bdump/mqa_ckpt_27978.trc:
ORA-01110: data file 160: '/OracleStorage/MQA_Data/mqa_SM_Anl3_HS_data.dbf'
ORA-01114: IO error writing block to file 160 (block # 1)
ORA-27063: number of bytes read/written is incorrect
SVR4 Error: 5: I/O error
Additional information: -1
Additional information: 8192
Thu Apr 3 15:50:21 2008
Thread 1 advanced to log sequence 1415
Current log# 1 seq# 1415 mem# 0: /datafiles/mqa/redo01.log
Thu Apr 3 15:51:13 2008
Thread 1 cannot allocate new log, sequence 1416
Checkpoint not complete
Current log# 1 seq# 1415 mem# 0: /datafiles/mqa/redo01.log
Thread 1 advanced to log sequence 1416
Current log# 2 seq# 1416 mem# 0: /datafiles/mqa/redo02.log
Thu Apr 3 15:51:45 2008
KCF: write/open error block=0xd21d1 online=1
file=114 /OracleStorage/MQA_Data/mqa_MSCI2D_data.dbf
error=27063 txt: 'SVR4 Error: 5: I/O error
Additional information: -1
Additional information: 8192'
Thu Apr 3 15:51:45 2008
Errors in file /u01/app/oracle/product/10.2.0/admin/mqa/bdump/mqa_dbw0_27974.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01114: IO error writing block to file 114 (block # 860625)
ORA-01110: data file 114: '/OracleStorage/MQA_Data/mqa_MSCI2D_data.dbf'
ORA-27063: number of bytes read/written is incorrect
SVR4 Error: 5: I/O error
Additional information: -1
Additional information: 8192
DBW0: terminating instance due to error 1242
Termination issued to instance processes. Waiting for the processes to exit
Instance terminated by DBW0, pid = 27974Hi Mozzam
the memory manager on 10.2 sends these messages but they are said not to be fatal (i.e. shutting down your database) unless you get a 4031. Read the metalink doc 330239.1 about that. Have you tried to size your sga properly? Is your db still crashing after you switched async io off?
Best regards
Matti
Message was edited by:
matti -
Temp Tables space problem with ORA-01114 and ORA-27072:
RDBMS :Oracle:9.2.0
OS: Linux AS3
Storage: SAND arrray (RAID 5)
Problem on exeuting dml statement
SQL> select * from myview ;
select * from myview
ERROR at line 1:
ORA-01114: IO error writing block to file 201 (block # 3977)
ORA-27072: skgfdisp: I/O error
Linux Error: 28: No space left on device
Additional information: 3976
ORA-01114: IO error writing block to file 201 (block # 3977)
ORA-27072: skgfdisp: I/O error
Linux Error: 28: No space left on device
Additional information: 3976
With Regards
JoyHello joy,
So, still looking for solution. I suggest you a sloution and it works well only if as you mentioned (in your previous post) that file causing error is temp file. So, get rid of this better you create new temporary table space and drop old one and then delete the old files manually.
But this will work only for Temp Tablespace not for normal tablespaces and datafiles. Prepare new temporary tablespace at different location from the previous one, try to make it on different disk beacuse it may be due to corruption of physical medium too.
Try this. If it works... you are through... otherwise i have no other options...
Please update..... -
ORA-01114 file$ now showing corresponding file
We are getting following errors in alert log
ORA-01114: IO error writing block to file 557 (block # 230471)
ORA-27072: skgfdisp: I/O error
ORA-01114: IO error writing block to file 557 (block # 230471)
ORA-27072: skgfdisp: I/O error
I ran following sql
SELECT tablespace_name, segment_type, owner, segment_name
FROM dba_extents
WHERE
file_id = 557 AND
230471 between block_id AND block_id + blocks - 1;
This shows 0 rows selected.
V$datafile and v$tempfile does not have have any entry for 557.
File$ has 258 records.
V$datafile has -194 records.
V$tempfile has - 007 records.
V$log has -004 records.
V$control has -003 records.
50 records. â Why file$ is showing 50 more records ?
Executed following sql
select a.file#,a.rfile#,b.file#,b.relfile# from
v$datafile a, file$ b
where a.file#(+)=b.file#
and a.rfile#(+)=b.relfile#
and a.ts#(+)=b.ts#;
â¦â¦
â¦..
FILE# RFILE# FILE# RELFILE#
232
233
234
235
236 236 236 236
237 237 237 237
238 238 238 238
239 239 239 239
240 240 240 240
241 241 241 241
242 242 242 242
FILE# RFILE# FILE# RELFILE#
243 243 243 243
244
245
246 246 246 246
247 247 247 247
248
249
250
251 251 251 251
252 252 252 252
253
â¦â¦..
â¦â¦.Some questions:
1. OS type?
2. File System type? Check the size of datafile #557 and check the FS limits.
4. Are there entries when you issue following command "select * from v$recover_file"?
5. Did you check the file permissions? (Oracle owner must have write permission) -
ORA-01114, ORA-29701, ORA-06512
I have got this errors. Can any experts help me to resolve this issue?
Due to this application users getting errors. Thanks.
Ora errors:
ORA-01114: IO error writing block to file 65 (block # 1956)
ORA-29701: unable to connect to Cluster Manager
ORA-06512: at "ERROR_PKG", line 151
ORA-06512: at "SET_SP", line 108
ORA-06512: at line 1Thanks for the suggestion. I did not think this errors related to db versions/os versions.
It is Oracle 10.2.0.4 running in Sun OS 5.10 and its running in ASM/RAC environment.
Since I have limited access(APP DBA) I have raised the ticket to SYSDBA to look in to this issue with my inputs.
My Inputs:
It seems like ORA-29701 error is related to ASM(css daemon)/RAC and all the remaining error is due to that.
Case 1:
Run the following batch files in the $ORACLE_HOME/bin directory as root
localconfig delete
localconfig add
Case 2:
The CSSD daemon uses /tmp/.oracle directory to establish a local socket for communication with local clients such as RDBMS instances. So you might want to ensure this was not removed by accident.
Solution:
Reboot the node.
Unfortually, the location of /tmp/.oracle cannot be changed (at least for 10g RAC) -
Failed to connect to database instance: ORA-02002: error writing to audit_t
I have a 4 node cluster and getting this alert very ferquently...
checking audit_trail gives this error
SQL> select count(*) from dba_audit_trail
2 ;
select count(*) from dba_audit_trail
ERROR at line 1:
ORA-01115: IO error reading block from file 1 (block # 108673)
ORA-01110: data file 1: '+DG_PROD/ngprod/datafile/system.258.665846277'
ORA-15081: failed to submit an I/O operation to a disk
Documentation on error says.........
ORA-02002: error while writing to audit trail
Cause: The auditing facility is unable to write to the AUDIT_TRAIL table. If this error occurs, SQL statements that are currently being audited may also fail. This error will occur if the SYSTEM tablespace runs out of disk space.
Action: Add space to the SYSTEM tablespace or delete rows from the AUDIT_TRAIL table. If these operations fail or do not eliminate the problem, shut down and restart Oracle with auditing disabled. This is done by setting the initialization parameter AUDIT_TRAIL to FALSE.
How should I check the system tablespaces ...I'm getting the error....and moreover they are autoextendible....Any idea about the issueYou can check the space available in any tablespace with a query from dba_free_space;
Give serious consideration to moving AUD$ out of the system tablespace. Theoretically you can not do this prior to database 11.1.0.7 (where you can use the built-in package DBMS_AUDIT_MGMT.MOVE_DBAUDIT_TABLES). But if you open an SR at metalink they will instruct you to do it manually which keeps everything legal and supported.
http://www.morganslibrary.org/reference/dbms_audit_mgmt.html
Also look into using resumable transactions (DBMS_RESUMABLE) to keep these things from happening in the future.
http://www.morganslibrary.org/reference/dbms_resumable.html -
Why i am getting this error durint RAC DB Creation using dbca -datafileDestination /var/opt/oracle/oradata/orcl
I cheek the directory and i am seeing 3 control files created in it. Out put of my alert.log file
Any idea?
=================================================
Starting ORACLE instance (normal)
Sun Apr 11 12:07:59 2004
Global Enqueue Service Resources = 64, pool = 1
Sun Apr 11 12:07:59 2004
Global Enqueue Service Enqueues = 128
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
GES IPC: Receivers 1 Senders 1
GES IPC: Buffers Receive 1000 Send 530 Reserve 300
GES IPC: Msg Size Regular 396 Batch 2048
SCN scheme 2
Using log_archive_dest parameter default value
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.4.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
shared_pool_size = 150994944
large_pool_size = 33554432
java_pool_size = 16777216
control_files = /var/opt/oracle/oradata/orcl/control01.ctl, /var/opt/oracle/oradata/orcl/control02.ctl, /var/opt/oracle/oradata/orcl/control03.ctl
db_block_size = 8192
db_cache_size = 50331648
compatible = 9.2.0.0.0
db_file_multiblock_read_count= 16
cluster_database_instances= 1
thread = 1
fast_start_mttr_target = 300
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 10800
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = orcl
local_listener = LISTENER_ORCL1
remote_listener = LISTENERS_ORCL
hash_join_enabled = TRUE
background_dump_dest = /ora01/oracle/admin/orcl/bdump
user_dump_dest = /ora01/oracle/admin/orcl/udump
core_dump_dest = /ora01/oracle/admin/orcl/cdump
sort_area_size = 524288
db_name = orcl
open_cursors = 300
star_transformation_enabled= FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 60817408
Sun Apr 11 12:07:59 2004
cluster interconnect IPC version:Oracle UDP/IP
IPC Vendor 1 proto 2 Version 1.0
PMON started with pid=2
DIAG started with pid=3
LMON started with pid=4
LMD0 started with pid=5
DBW0 started with pid=6
LGWR started with pid=7
CKPT started with pid=8
SMON started with pid=9
RECO started with pid=10
Sun Apr 11 12:08:02 2004
CREATE DATABASE orcl
MAXINSTANCES 32
MAXLOGHISTORY 0
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
DATAFILE '/var/opt/oracle/oradata/orcl/orcl/system01.dbf' SIZE 250M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE '/var/opt/oracle/oradata/orcl/orcl/temp01.dbf' SIZE 40M REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
UNDO TABLESPACE "UNDOTBS1" DATAFILE '/var/opt/oracle/oradata/orcl/orcl/undotbs01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
CHARACTER SET WE8ISO8859P1
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 ('/var/opt/oracle/oradata/orcl/orcl/redo01.log') SIZE 5M REUSE,
GROUP 2 ('/var/opt/oracle/oradata/orcl/orcl/redo02.log') SIZE 5M REUSE
Sun Apr 11 12:08:02 2004
lmon registered with NM - instance id 1 (internal mem no 0)
Sun Apr 11 12:08:03 2004
Reconfiguration started
List of nodes: 0,
Global Resource Directory frozen
one node partition
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Resources and enqueues cleaned out
Resources remastered 0
set master node info
Submitted all remote-enqueue requests
Update rdomain variables
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
0 GCS shadows traversed, 0 replayed, 0 unopened
Submitted all GCS remote-cache requests
Sun Apr 11 12:08:03 2004
Reconfiguration complete
Post SMON to start 1st pass IR
Sun Apr 11 12:08:24 2004
Database mounted in Exclusive Mode.
Sun Apr 11 12:08:35 2004
Successful mount of redo thread 1, with mount id 1051001763.
Assigning activation ID 1051001763 (0x3ea503a3)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: /var/opt/oracle/oradata/orcl/orcl/redo01.log
Successful open of redo thread 1.
Sun Apr 11 12:08:38 2004
SMON: enabling cache recovery
Sun Apr 11 12:08:38 2004
WARNING: Default passwords for SYS and SYSTEM will be used.
Please change the passwords.
Sun Apr 11 12:08:38 2004
create tablespace SYSTEM datafile '/var/opt/oracle/oradata/orcl/orcl/system01.dbf' SIZE 250M REUSE AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL online
Sun Apr 11 12:10:08 2004
Errors in file /ora01/oracle/admin/orcl/bdump/orcl1_ckpt_16649.trc:
ORA-00206: error in writing (block 3, # blocks 1) of controlfile
ORA-00202: controlfile: '/var/opt/oracle/oradata/orcl/control03.ctl'
ORA-27072: skgfdisp: I/O error
Linux Error: 5: Input/output error
Additional information: 2
ORA-00206: error in writing (block 3, # blocks 1) of controlfile
ORA-00202: controlfile: '/var/opt/oracle/oradata/orcl/control01.ctl'
ORA-27072: skgfdisp: I/O error
Linux Error: 5: Input/output error
Additional information: 2
Sun Apr 11 12:10:08 2004
Errors in file /ora01/oracle/admin/orcl/bdump/orcl1_ckpt_16649.trc:
ORA-00221: error on write to controlfile
ORA-00206: error in writing (block 3, # blocks 1) of controlfile
ORA-00202: controlfile: '/var/opt/oracle/oradata/orcl/control03.ctl'
ORA-27072: skgfdisp: I/O error
Linux Error: 5: Input/output error
Additional information: 2
ORA-00206: error in writing (block 3, # blocks 1) of controlfile
ORA-00202: controlfile: '/var/opt/oracle/oradata/orcl/control01.ctl'
ORA-27072: skgfdisp: I/O error
Linux Error: 5: Input/output error
Additional information: 2
Sun Apr 11 12:10:08 2004
CKPT: terminating instance due to error 221
Sun Apr 11 12:10:09 2004
System state dump is made for local instance
Sun Apr 11 12:10:09 2004
Trace dumping is performing id=[cdmp_20040411121009]
Sun Apr 11 12:10:13 2004
Instance terminated by CKPT, pid = 16649
=================================================dear karan & all
i have copied "control file" from another location but now it generate an error
SQL> startup
ORACLE instance started.
Total System Global Area 557842432 bytes
Fixed Size 1250140 bytes
Variable Size 289410212 bytes
Database Buffers 264241152 bytes
Redo Buffers 2940928 bytes
ORA-00211: control file does not match previous control files
ORA-00202: control file: 'F:\ORACLE\IDS\SAPDATA1\CNTRL\CNTRLIDS.DBF'
SQL>
now tell me what can i do
regard -
ORA-00607: Internal error occurred while making a change to a data block
hi
i hv use testing purpose oracle 10 Xe in unix
but when today i hv connect database following error occured
SQL> startup
ORACLE instance started.
Total System Global Area 83886080 bytes
Fixed Size 1257284 bytes
Variable Size 75497660 bytes
Database Buffers 4194304 bytes
Redo Buffers 2936832 bytes
Database mounted.
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4193], [625], [640], [], [], [],
I hv check alert log , but no proper solution is given , how can start databaseDuh, and of course I missed the significance of
oracle 10 Xe in unix
XE is only supported for Linux - according to the downloads page that means "Debian, Mandriva, Novell, Red Hat and Ubuntu".
Oracle have not publically stated the reasons why XE is only available on Linux and Windows, but my guess is that it is something to do the Intel chip architecture. If this is so it would be possible for Oracle to port XE to run on Solaris for x86. But they have not done so yet.
Which means, alas, that you are unlikely to get any help for this one, because XE is not supported on any unix platform.
Good luck, APC
Maybe you are looking for
-
Error when using DBMS_SQL.parse
Has anyone ever ran into this error "ORA-00932: inconsistent datatypes: expected NUMBER got DATE" when using DBMS_SQL.parse? I'm trying to pass in a sql statement that includes date columns but it keeps failing during the parse step. If I put a "to_c
-
I can use Alt+D to get to the Location Bar to type in a URL, but is there a way I can then go to the default text box, to enter data, once the search engine page has been opened, by using a short-cut key? I didn't recognize any of the commands in the
-
Process chain not continue after successful node
Hi gurus, In my process chain I load data from R/3 to PSA and then execute DTP to DSO, all actions are serially. Usually our PC is running well. But recently the PC will stop after the loading to PSA was successfully end , which means in the log v
-
How do i get ios 3.1.3 for my old ipod touch?
My Ipod tich is now 5 years old. When I try to download an app like Public Radio Tuner, I get an error message that I require Ios 3.1.3. But when I go to Itunes and ask for an update I get the message that the operating system is up to date. Any solu
-
USRID_LONG field from PA0105 table
Hi Experts, I have created view on PA006 and PA0105 tables. i want to add USRID_LONG field from PA0105 to my view. but the length of the field is 241 and it is not adding to view. how can i add this field to view. BW side Info objects accepts the len