ORA-01552 error in Oracle 10g DB!!!

Hi,
I have an application running with an Oracle 10g db in Solaris 10 platform.
recently when i tried logging in to my Applicn. i get the following error in its log:-
*"sqociExec error: sqlcode=1552 message=ORA-01552: cannot use system rollback segment for non-system tablespace 'USERS'"*
and my login fails.
Am this apllicn. guy and don't know much about Oracle DB. Also i don't seem to have the comfort of DBA here so am hoping to receive help from
you guys in here.
i tried few tips which i picked from this forum but don't know what to do with its results...here they are..
*1) "SELECT segment_name, tablespace_name, initial_extent, status from dba_rollback_segs;"*
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
SYSTEM SYSTEM 114688
ONLINE
_SYSSMU1$                      UNDOTBS1                               131072
ONLINE
_SYSSMU2$                      UNDOTBS1                               131072
ONLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU3$                      UNDOTBS1                               131072
ONLINE
_SYSSMU4$                      UNDOTBS1                               131072
ONLINE
_SYSSMU5$                      UNDOTBS1                               131072
ONLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU6$                      UNDOTBS1                               131072
ONLINE
_SYSSMU7$                      UNDOTBS1                               131072
ONLINE
_SYSSMU8$                      UNDOTBS1                               131072
ONLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU9$                      UNDOTBS1                               131072
ONLINE
_SYSSMU10$                     UNDOTBS1                               131072
ONLINE
_SYSSMU11$                     UNDOTBS1                               131072
OFFLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU12$                     UNDOTBS1                               131072
OFFLINE
_SYSSMU13$                     UNDOTBS1                               131072
OFFLINE
_SYSSMU14$                     UNDOTBS1                               131072
OFFLINE
SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT
STATUS
_SYSSMU15$                     UNDOTBS1                               131072
OFFLINE
_SYSSMU16$                     UNDOTBS1                               131072
OFFLINE
_SYSSMU17$                     UNDOTBS1                               131072
OFFLINE
18 rows selected.
2)*"select name, value from v$parameter where name like '%undo%';"*
NAME
VALUE
undo_management
AUTO
undo_tablespace
UNDOTBS1
undo_retention
900
What next????
Guys Please help me out!!! i have to get the application running soon!!!
please do give steps clearly bcoz am real newbie and the DB we are working on is a *"PRODUCTION"* one
Thanks
kris

890466 wrote:
@orawiss
Sorry what precisely should i give in place of 'name' in
*"ALTER ROLLBACK SEGMENT 'name' online."*
In my case?
thanks
kris
Edited by: 890466 on Oct 10, 2011 3:41 AMUndo tablespace names which status are offline shown in your query.

Similar Messages

Ora 600 and ora 7445 error in oracle 10g r2

hi all,
we are using Oracle 10g r2.
os is windows 2003 server,
ram is 4 gb.
front end is java .
we got a below mentioned errors.
i got the RA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], [],
and ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
and Error 0 in kwqmnpartition(), aborting txn errors.
for aug 3 11.42.47 we got a ora 600 error after that through front end (java) users can't able to connect the database.the not able to executed the query session disconnected error.
what is reason for theis error . how it will rectifiy.?
pls advice.Below i attached the alret log message .
Sun Aug 02 04:04:24 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:48:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:49:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:38:49 2009
Thread 1 advanced to log sequence 1732
Current log# 3 seq# 1732 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Sun Aug 02 07:44:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:45:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 22:00:26 2009
Thread 1 advanced to log sequence 1733
Current log# 1 seq# 1733 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG
Mon Aug 03 07:08:15 2009
Thread 1 advanced to log sequence 1734
Current log# 2 seq# 1734 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG
Mon Aug 03 09:28:23 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 09:30:27 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 11:42:47 2009
Errors in file e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc:
ORA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], []
Mon Aug 03 13:20:00 2009
Thread 1 advanced to log sequence 1735
Current log# 3 seq# 1735 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Mon Aug 03 16:07:07 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
Mon Aug 03 16:07:11 2009
Process m000 died, see its trace file
Mon Aug 03 16:07:11 2009
ksvcreate: Process(m000) creation failed
Mon Aug 03 16:08:37 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 16:10:40 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:25:05 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:27:11 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:32:19 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:33:24 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:52:08 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:54:09 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:05:33 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:09:02 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_5132.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x7C34126B] [ADDR:0x0] [UNABLE_TO_WRITE] []
Mon Aug 03 19:10:27 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn

Hi reshumakur
As this is your PRODUCTION system THEN_ The best help to offer in case of ORA-600, and ORA-7445 is to open SR with metalink. Submit with the SR the following
1- Alert log
2- Trace files (in ur case e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc: and e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:)
3- Describe what was happening when you had these errors.
Try to avoid free help when you have ORA-600 and ORA-07445. This errors could be becuase of BUGS. Oracle Support will know this from the call stack in the trace file.
Then Do your best to patch 10.2.0.4 and the latest CPU patch.
Good Luck

ORA-04030 error on Oracle 10g R2 and Windows Server 2003

We are getting this messege atleast once a day, using Oracle database 10g R2 with Oracle Developer 6i forms, we have to restart the service and then it works fine.... DB Server has 4GB RAM
SGA 1.6 GB
PGA 800 M

Hi
It is due to lack of memory or due to more put more work on server processes so try to increase memory or decrease the number of users
Shafiulla

ORA-29701과 ORA-29702 ERROR의 원인과 조치방법(OGMS관련 ORACLE ERROR)

제품 : ORACLE SERVER
작성날짜 : 2004-08-13
SCOPE
Standard Edition 에서는 Real Application Clusters 기능이 10g(10.1.0) 이상 부터 지원이 됩니다.
ORA-29701과 ORA-29702 ERROR의 원인과 조치 방법(OGMS 관련 Oracle ERROR)
======================================================================
Explanation
ORA-29701과 ORA-29702는 OGMS(Oracle Group Membership Services)에 문제가
발생했을 때 Oracle에서 로그를 남기는 에러이다.
1. OGMS란?
OPS 운영 환경에서 노드 간의 통신을 위해 IDLM(Integrated Distributed Lock Manager)과
다른 오라클 컴포넌트들은 OS의 Cluster Manager와 통신을 해야 한다.
이 때에 인터페이스를 제공하여 주는 것이 바로 OGMS이다.
GMS는 일련의 Application Programming Interface (API)들로 구성되어 있으며,
OPS 컴포넌트들은 이 API들을 통해 Cluster Manager와 통신을 하게 된다.
GMS는 클러스터의 운영 상태를 모니터하고, 클러스터와의 instance connection을
관장하며, 메시지를 전달하는 역할을 담당한다.
platform에 따라 GMS는 ogmsctl 프로그램을 사용해서 따로 기동을 시켜 주어야만
하거나, opsctl 프로그램을 사용할 때 자동적으로 기동된다.
2. Error 분석
1) ORA-29701
a. 오라클에서 GMS에 접속할 수 없을 경우 발생한다.
이것은 Oracle이 startup 될 때, GMS가 실행되지 않고 있을 때 발생한다. 이와
같은 경우에는 'ogmsctl status' 명령을 상용하여 GMS가 startup되었는지 확인
하여야 한다.
b. lmon( GMS client )이 communication file의 위치를 찾지 못할 경우 발생한다.
기본적으로 사용하는 디렉토리인 /tmp/.ogms를 사용하지 않을 경우 GMS home이
지정되어야 한다. OGMS home directory를 별도로 지정하여 사용할 경우에는
init.ora 파라미터 파일에서 ogms_home 파라미터 값을 지정해 주어야 한다.
c. 기타 발생 원인은 GMS에 틀린 internal function(skgxn)이 사용되거나
GMS가 local request에 대한 서비스를 할 수 없거나 CM subsystem에 문제가 있을
경우 등등이 있다.
2) ORA-29702
GMS 서비스에 예상치 못한 에러가 발생했을 경우 로그에 남게 된다. GMS가 실행
중인지를 확인해 보고, 내부 에러로 인해 GMS가 스스로 shutdown 되었다면
daemon file에 기록된 트레이스 정보를 살펴보아야 한다.
Reference Documents
none

Error in Oracle 10g (10.0.3) in Servlet Filtering

Hi
I found this error on oracle 10g (10.0.3) Version. my same code is working on 9.0.4 can you please tell what is the problem? I am using servlet filtering.
Mine is swing base application which will call applet and this will call Servlet.
500 Internal Server Error
java.lang.IllegalStateException: dispatcher chain is empty
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.EvermindHttpServletRequest.getCurrentDispatcher(EvermindHttpServletRequest.java:3975)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.EvermindHttpServletRequest.getParameters(EvermindHttpServletRequest.java:1393)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.EvermindHttpServletRequest.getParameter(EvermindHttpServletRequest.java:2126)
     at com.fmr.cfit.security.IdentityAgent.getUserIdFromParameter(Unknown Source)
     at com.fmr.cfit.security.IdentityAgent.getUserId(Unknown Source)
     at com.fmr.cfit.security.IdentityAgent.doFilter(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.FileRequestDispatcher.handleWithFilter(FileRequestDispatcher.java:130)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.FileRequestDispatcher.forwardInternal(FileRequestDispatcher.java:210)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:824)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.0.3.0.0) - Developer Preview].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:291)
     at java.lang.Thread.run(Unknown Source)

I am able to resolve the issue:
The mistake I was doing was creating ORACLE_HOME in the enviornment variable, as I have Oracle 10 G database and SOA suite on the same machine, so it was creating a clash, the right approach is setting the ORACLE_HOME through command prompt, I was setting ORACLE_HOME because while executing the configure_oid.bat file it requires ORACLE_HOME to be set.
-Yatan

WEBUTIL_FILE.Get File Separator must be declared error in oracle 10g

hi,
when i compile the forms with attached webutil.pll , i got the error "WEBUTIL_FILE.Get File Separator must be declared error in oracle 10g".but i have compiled the webutil.pll its fine.Please tell me th solution.
Thanks,
Maran

hi
hmmmm the latest version of webutil.pll you downloaded from where? forms version 10.1.2... comes with the latest version of .pll.
what is the webutil version?
sarah

Oracle error ORA-00600 when using Oracle 10g and Sun One Web Server 6.1

I have a java application that was running under Solaris 8 and Oracle 9i. I am trying to get it up and running on a new server that is configured with Solaris 9 and Oracle 10g. Whenever the application tries to connect to the database it receives the following error: ORA-00600 [ttcgcshnd-1][0]. My research indicates that this is an internal Oracle error that represents a low level unexpected condition. I have looked through my configuration for the Web Server and I have not been able to determine the cause of this problem. My DBA tells me that we have the latest patch installed for Oracle! Has anyone encountered this problem before? Any help would be greatly appreciated!

If the problem is also present in a SWING app, i.e. outside the web server, then it is porbably something external to the webserver.
I think you should ensure that the driver and database are compatible with each other. It is very likely that you need a new jdbc driver for the new database.
download from here http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc101020.html
try the ojdbc14.jar

USER: terminating instance due to error 472 (Oracle 10g)

Hi folks,
We come across a problem that our instance was down suddenly. When checking with the alert log file, it shows that the instance was terminated due to error 472. Did you come across such situation before? Any suggestions would be welcomed.
Following are some information about our Oracle and the log file, trace file.
Oracle Database 10g Release 10.2.0.2.0 - Production
ORACLE_HOME = /app/oracle/lmes
System name: Linux
Node name: lmes-oracle2.ust.hk
Release: 2.4.21-32.ELsmp
Version: #1 SMP Fri Apr 15 21:17:59 EDT 2005
Machine: i686
Alert Log File
Fri Feb 23 09:11:07 2007
Shutting down archive processes
Fri Feb 23 09:11:12 2007
ARCH shutting down
ARC2: Archival stopped
Fri Feb 23 15:16:09 2007
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=32, OS id=1072
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_SCHEMA_01', 'SYSTEM', 'KUPC$C_1_20070223151610', 'KUPC$S_1_20070223151610', 0);
kupprdp: worker process DW01 started with worker id=1, pid=33, OS id=1077
to execute - SYS.KUPW$WORKER.MAIN('SYS_EXPORT_SCHEMA_01', 'SYSTEM');
Fri Feb 23 15:16:28 2007
Thread 1 advanced to log sequence 1309
Current log# 3 seq# 1309 mem# 0: /app/oracle/oradata/elop/redo03.log
Fri Feb 23 15:20:29 2007
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=32, OS id=1526
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_SCHEMA_01', 'SYSTEM', 'KUPC$C_1_20070223152029', 'KUPC$S_1_20070223152029', 0);
kupprdp: worker process DW01 started with worker id=1, pid=33, OS id=1528
to execute - SYS.KUPW$WORKER.MAIN('SYS_EXPORT_SCHEMA_01', 'SYSTEM');
Fri Feb 23 22:15:35 2007
Thread 1 advanced to log sequence 1310
Current log# 1 seq# 1310 mem# 0: /app/oracle/oradata/elop/redo01.log
Fri Feb 23 23:04:10 2007
USER: terminating instance due to error 472
Instance terminated by USER, pid = 7779
Trace File - elop_lgwr_2312.trc
/app/oracle/admin/elop/bdump/elop_lgwr_2312.trc
Oracle Database 10g Release 10.2.0.2.0 - Production
ORACLE_HOME = /app/oracle/lmes
System name: Linux
Node name: lmes-oracle2.ust.hk
Release: 2.4.21-32.ELsmp
Version: #1 SMP Fri Apr 15 21:17:59 EDT 2005
Machine: i686
Instance name: elop
Redo thread mounted by this instance: 1
Oracle process number: 6
Unix process pid: 2312, image: [email protected] (LGWR)
*** SERVICE NAME:() 2007-02-23 09:10:07.372
*** SESSION ID:(331.1) 2007-02-23 09:10:07.372
LGWR: Archivelog for thread 1 sequence 1308 will NOT be compressed
tkcrrsarc: (WARN) Failed to find ARCH for message (message:0x1)
tkcrrpa: (WARN) Failed initial attempt to send ARCH message (message:0x1)
Maximum redo generation record size = 156160 bytes
Maximum redo generation change vector size = 150672 bytes
tkcrrsarc: (WARN) Failed to find ARCH for message (message:0x10)
tkcrrpa: (WARN) Failed initial attempt to send ARCH message (message:0x10)
*** 2007-02-23 15:16:27.116
LGWR: Archivelog for thread 1 sequence 1309 will NOT be compressed
*** 2007-02-23 22:15:35.383
LGWR: Archivelog for thread 1 sequence 1310 will NOT be compressed
Trace File - elop_ora_2336.trc
/app/oracle/admin/elop/udump/elop_ora_2336.trc
Oracle Database 10g Release 10.2.0.2.0 - Production
ORACLE_HOME = /app/oracle/lmes
System name: Linux
Node name: lmes-oracle2.ust.hk
Release: 2.4.21-32.ELsmp
Version: #1 SMP Fri Apr 15 21:17:59 EDT 2005
Machine: i686
Instance name: elop
Redo thread mounted by this instance: 1
Oracle process number: 15
Unix process pid: 2336, image: [email protected]
*** SERVICE NAME:() 2007-02-23 09:10:05.988
*** SESSION ID:(324.3) 2007-02-23 09:10:05.988
Thread 1 checkpoint: logseq 1307, block 2, scn 27684035
cache-low rba: logseq 1307, block 30724
on-disk rba: logseq 1307, block 33205, scn 27699991
start recovery at logseq 1307, block 30724, scn 0
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 1240Kb in 0.03s => 40.38 Mb/sec
Total physical reads: 4096Kb
Longest record: 21Kb, moves: 0/1975 (0%)
Change moves: 1/24 (4%), moved: 0Mb
Longest LWN: 285Kb, moves: 0/245 (0%), moved: 0Mb
Last redo scn: 0x0000.01a6ab16 (27699990)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 2
Average hash chain = 346/345 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 4783/5281 = 0.9
*** 2007-02-23 09:10:06.132
KCRA: start recovery claims for 346 data blocks
*** 2007-02-23 09:10:07.153
KCRA: blocks processed = 346/346, claimed = 346, eliminated = 0
*** 2007-02-23 09:10:07.154
Recovery of Online Redo Log: Thread 1 Group 1 Seq 1307 Reading mem 0
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 2
Average hash chain = 346/345 = 1.0
Max compares per lookup = 2
Avg compares per lookup = 3424/5126 = 0.7
tkcrrsarc: (WARN) Failed to find ARCH for message (message:0x1)
tkcrrpa: (WARN) Failed initial attempt to send ARCH message (message:0x1)
Error in executing triggers on database startup
*** 2007-02-23 09:10:11.557
ksedmp: internal or fatal error
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
Thanks & Regards,
Liona

Hi,
I have the same error:
I have gridcontrol 10gR3 installed on VM / Linux 4 AS box. This is second time down time:
finally I found the DB tiers is down.
I have the following message:
Private_strands 18 at log switch
Thread 1 advanced to log sequence 215
Current log# 2 seq# 215 mem# 0: /u02/ora/gridcontrol10g/oradata/emrep/redo02.log
Thu Apr 19 14:30:33 2007
Private_strands 18 at log switch
Thread 1 advanced to log sequence 216
Current log# 3 seq# 216 mem# 0: /u02/ora/gridcontrol10g/oradata/emrep/redo03.log
Thu Apr 19 15:42:34 2007
Private_strands 18 at log switch
Thread 1 advanced to log sequence 217
Current log# 4 seq# 217 mem# 0: /u02/ora/gridcontrol10g/oradata/emrep/redo04.log
Thu Apr 19 16:52:05 2007
LGWR: terminating instance due to error 472
Instance terminated by LGWR, pid = 26049
Thu Apr 19 17:27:08 2007
I have no idea why this happen. is it because DB is ona VM machine?
I remember one time whe I took a snapshot on VM server, grid control services are down for a moment, 4 minutes, WebCache seemed cleaned, this page is gone, after 3 minutes, it comes back.
Anyone has the same issue, please share your experience.
Thanks a lot,
Hank
Message was edited by:
Hank@AHM

ORA-12154 while installing Oracle 10g on windows 7

Hi,
I am trying to install Oracle 10g express edition on my machine (core 2 duo 2.93) running on Windows 7.
The installation moves on perfectly for the 1st step and while running the 2nd step (Net configuration Assistant), it gives the ORA-12154 error.
The contents of my configuration files at this point are as follows:
Listener.ora
=============
SID_LIST_ORCL =
(SID_LIST =
(SID_DESC =
(SID_NAME = ORCL)
(ORACLE_HOME = F:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
ORCL =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
=============
And that of tnsnames.ora is:
=============
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
=============
After some googling around, I have found and installed the Microsoft Loopback adapter too (since my LAN is DHCP enabled) and also tried to turn on the firewall on my machine to check if it is not a problem with the port 1521 being blocked by the firewall.
However, even after all that I still get the error "ORA-12154: TNS:could not resolve the connect identifier specified." while running the Net configuration Assistant and/or running SQL Plus to connect to the SID - ORCL.
I can only see one service running in my services by the name : OracleOraDb10g_home1TNSListenerORCL
Any suggestions or advice on the error would be much welcome.
Is it anything related to Windows 7 ? Because I have managed to install using the same installer on another machine which runs Windows XP and everything seems fine there.
Thanking you all in anticipation.
Shreyas

user12753151 wrote:
Hmmm.. but then I'd have expected some installation error. I have read around that people have managed to install oracle on windows 7.
The error displayed seems to be indicating that there is some configuration or permissions issue.Check that the user has permission to write in the ORACLE_HOME\network\admin - UAC might be blocking that.
Install with software only, and run netca & dbca separately to create the database after the s/w install. (That's the way it is done in production anyway, so get used to it.)
But yes - you still may have problems. Those who did fake it out on Windows 7 usually understand what to do. If you are smart enough to actually do it, my hat is off to you.

Ora-00604 while installing Oracle 10g on Windows XP SP2

I was installing Oracle 10g on Windows XP but the dbca was failling. So I tried to create a database manually.
But every time I launch this:
"SQL> startup nomount pfile="C:\oracle\product\10.2.0\admin\XP10G\scripts\initXP10G.ora";"
I always had:
ORA-00604: error occurred at recursive SQL level 1
ORA-02248: invalid option for ALTER SESSION
I tried to change some memory value in the init*.ora without more success.
So if anyone has been had such issue; he would be an help for me.
Thansks
MUGANGA

initXP10G.ora is a 3 Kbytes file created by OEM and updated by Dos edit program. Here bellow is the contain:
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# File Configuration
control_files=("C:\oracle\product\10.2.0\oradata\XP10G\control01.ctl", "C:\oracle\product\10.2.0\oradata\XP10G\control02.ctl", "C:\oracle\product\10.2.0\oradata\XP10G\control03.ctl")
db_recovery_file_dest=C:\oracle\product\10.2.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Cursors and Library Cache
open_cursors=150
processes=100
# Diagnostics and Statistics
background_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\bdump
core_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\cdump
user_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\udump
# Miscellaneous
compatible=10.2.0.1.0
# Job Queues
job_queue_processes=10
# Database Identification
db_domain=""
db_name=XP10G
# SGA Memory
sga_target=177209344
# Processes and Sessions
processes=150
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=XP10GXDB)"
# Security and Auditing
audit_file_dest=C:\oracle\product\10.2.0\admin\XP10G\adump
remote_login_passwordfile=EXCLUSIVE
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=58720256
shared_pool_size=83886080
nls_territory='SWITZERLAND'
nls_language='FRENCH'

Error in Oracle 10g Installation windows 2000 advance server

Hi,
I am facing error message below when try 2 install oracle 10 in my work station . Already 8i and 9i with forms and reports was there in my machine. The follwing error display in log file.
Actual Result: 4
Check complete. The overall result of this check is: Passed
=======================================================================
Checking physical memory requirements ...
Expected result: 256MB
Actual Result: 503MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
After given an ip address and proceeded. This error message is displayed in trace file:
Shutting down instance: further logons disabled
Mon May 07 11:32:09 2007
Stopping background process CJQ0
Mon May 07 11:32:09 2007
Stopping background process MMNL
Mon May 07 11:32:10 2007
Stopping background process MMON
Mon May 07 11:32:11 2007
Shutting down instance (immediate)
License high water mark = 1
Mon May 07 11:32:11 2007
Stopping Job queue slave processes
Mon May 07 11:32:11 2007
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Mon May 07 11:32:16 2007
alter database close normal
ORA-1507 signalled during: alter database close normal...
The error message in udump trace file is as follows:
Dump file e:\or10g\product\10.2.0\admin\or10g\udump\or10g_ora_2340.trc
Mon May 07 11:26:03 2007
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows 2000 Version V5.0 Service Pack 4
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:4M/503M, Ph+PgF:9M/1327M, VA:1740M/2047M
Instance name: or10g
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 2340, image: ORACLE.EXE (SHAD)
opiino: Attach failed! error=-1 ifvp=00000000
There is no pfile or anything in admin directory. Kindly help me in installing 10G for testing please
efshafi

Solution : Install and Configure Microsoft LoopBack Adapter:
Installation of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Add Hardware and then Click Next.
3. Click Install the hardware that I manually select from a list, and then click Next.
4. Click Network adapters, and then click Next.
5. In the Manufacturer box, click Microsoft.
6. In the Network Adapter box, click Microsoft Loopback Adapter, and then click Next.
7. Click Finish.
Configuration of Microsoft LoopBack Adapter:
1. Click Start, and then click Control Panel.
2. Click on Network and Sharing Center.
3. On the left side of the Window, Cick Manage Network Connections.
4. You will find a name like "Local Area Connection 4 Unidentified Network Microsoft Loopback Adapter".
5. Right Click on it and select Properties.
6. Then Click on Internet Protocol Version 4 (TCP/IPv4) and then again click Properties.
7. Click on Use the following IP address and enter 192.168.1.10 for the IP Address and 255.255.255.0 for the subnet mask.
8. Click OK.
After this you can continue with the installation of the Oracle 10g again.

Query working fine in 9i but throwing an error in Oracle 10g

Hi All,
I am having a query which contains large number of When clauses inside a case statement.
The Same SQL is working fine in 9i, but not working in 10G.
If we try to remove one of the When clause in the query, its working fine else it is giving the error ORA-00939 Too many arguments for functions.
Can any one tell me the solution for this and what is the maximum number of when clauses allowed inside case statemen in oracle 10g.
Thanks in advance
Regards
Karthik

it should not have worked in 9iR2... it is correct according to the doc to return an error message when using more than 255 expressions...
SQL> select version from v$instance;
VERSION
9.2.0.7.0
SQL> select case 1
2 when 2 then 3
3 when 4 then 5
4 when 6 then 7
5 when 8 then 9
6 when 10 then 11
7 when 12 then 13
8 when 14 then 15
9 when 16 then 17
10 when 18 then 19
11 when 20 then 21
12 when 22 then 23
13 when 24 then 25
14 when 26 then 27
15 when 28 then 29
16 when 30 then 31
17 when 32 then 33
18 when 34 then 35
19 when 36 then 37
20 when 38 then 39
21 when 40 then 41
22 when 42 then 43
23 when 44 then 45
24 when 46 then 47
25 when 48 then 49
26 when 50 then 51
27 when 52 then 53
28 when 54 then 55
29 when 56 then 57
30 when 58 then 59
31 when 60 then 61
32 when 62 then 63
33 when 64 then 65
34 when 66 then 67
35 when 68 then 69
36 when 70 then 71
37 when 72 then 73
38 when 74 then 75
39 when 76 then 77
40 when 78 then 79
41 when 80 then 81
42 when 82 then 83
43 when 84 then 85
44 when 86 then 87
45 when 88 then 89
46 when 90 then 91
47 when 92 then 93
48 when 94 then 95
49 when 96 then 97
50 when 98 then 99
51 when 100 then 101
52 when 102 then 103
53 when 104 then 105
54 when 106 then 107
55 when 108 then 109
56 when 110 then 111
57 when 112 then 113
58 when 114 then 115
59 when 116 then 117
60 when 118 then 119
61 when 120 then 121
62 when 122 then 123
63 when 124 then 125
64 when 126 then 127
65 when 128 then 129
66 when 130 then 131
67 when 132 then 133
68 when 134 then 135
69 when 136 then 137
70 when 138 then 139
71 when 140 then 141
72 when 142 then 143
73 when 144 then 145
74 when 146 then 147
75 when 148 then 149
76 when 150 then 151
77 when 152 then 153
78 when 154 then 155
79 when 156 then 157
80 when 158 then 159
81 when 160 then 161
82 when 162 then 163
83 when 164 then 165
84 when 166 then 167
85 when 168 then 169
86 when 170 then 171
87 when 172 then 173
88 when 174 then 175
89 when 176 then 177
90 when 178 then 179
91 when 180 then 181
92 when 182 then 183
93 when 184 then 185
94 when 186 then 187
95 when 188 then 189
96 when 190 then 191
97 when 192 then 193
98 when 194 then 195
99 when 196 then 197
100 when 198 then 199
101 when 200 then 201
102 when 202 then 203
103 when 204 then 205
104 when 206 then 207
105 when 208 then 209
106 when 210 then 211
107 when 212 then 213
108 when 214 then 215
109 when 216 then 217
110 when 218 then 219
111 when 220 then 221
112 when 222 then 223
113 when 224 then 225
114 when 226 then 227
115 when 228 then 229
116 when 230 then 231
117 when 232 then 233
118 when 234 then 235
119 when 236 then 237
120 when 238 then 239
121 when 240 then 241
122 when 242 then 243
123 when 244 then 245
124 when 246 then 247
125 when 248 then 249
126 when 250 then 251
127 when 252 then 253
128 when 254 then 255
129 when 256 then 257
130 end x from dual;
X
SQL> select version from v$instance;
VERSION
10.2.0.2.0
SQL> select case 1
2 when 2 then 3
3 when 4 then 5
4 when 6 then 7
5 when 8 then 9
6 when 10 then 11
7 when 12 then 13
8 when 14 then 15
9 when 16 then 17
10 when 18 then 19
11 when 20 then 21
12 when 22 then 23
13 when 24 then 25
14 when 26 then 27
15 when 28 then 29
16 when 30 then 31
17 when 32 then 33
18 when 34 then 35
19 when 36 then 37
20 when 38 then 39
21 when 40 then 41
22 when 42 then 43
23 when 44 then 45
24 when 46 then 47
25 when 48 then 49
26 when 50 then 51
27 when 52 then 53
28 when 54 then 55
29 when 56 then 57
30 when 58 then 59
31 when 60 then 61
32 when 62 then 63
33 when 64 then 65
34 when 66 then 67
35 when 68 then 69
36 when 70 then 71
37 when 72 then 73
38 when 74 then 75
39 when 76 then 77
40 when 78 then 79
41 when 80 then 81
42 when 82 then 83
43 when 84 then 85
44 when 86 then 87
45 when 88 then 89
46 when 90 then 91
47 when 92 then 93
48 when 94 then 95
49 when 96 then 97
50 when 98 then 99
51 when 100 then 101
52 when 102 then 103
53 when 104 then 105
54 when 106 then 107
55 when 108 then 109
56 when 110 then 111
57 when 112 then 113
58 when 114 then 115
59 when 116 then 117
60 when 118 then 119
61 when 120 then 121
62 when 122 then 123
63 when 124 then 125
64 when 126 then 127
65 when 128 then 129
66 when 130 then 131
67 when 132 then 133
68 when 134 then 135
69 when 136 then 137
70 when 138 then 139
71 when 140 then 141
72 when 142 then 143
73 when 144 then 145
74 when 146 then 147
75 when 148 then 149
76 when 150 then 151
77 when 152 then 153
78 when 154 then 155
79 when 156 then 157
80 when 158 then 159
81 when 160 then 161
82 when 162 then 163
83 when 164 then 165
84 when 166 then 167
85 when 168 then 169
86 when 170 then 171
87 when 172 then 173
88 when 174 then 175
89 when 176 then 177
90 when 178 then 179
91 when 180 then 181
92 when 182 then 183
93 when 184 then 185
94 when 186 then 187
95 when 188 then 189
96 when 190 then 191
97 when 192 then 193
98 when 194 then 195
99 when 196 then 197
100 when 198 then 199
101 when 200 then 201
102 when 202 then 203
103 when 204 then 205
104 when 206 then 207
105 when 208 then 209
106 when 210 then 211
107 when 212 then 213
108 when 214 then 215
109 when 216 then 217
110 when 218 then 219
111 when 220 then 221
112 when 222 then 223
113 when 224 then 225
114 when 226 then 227
115 when 228 then 229
116 when 230 then 231
117 when 232 then 233
118 when 234 then 235
119 when 236 then 237
120 when 238 then 239
121 when 240 then 241
122 when 242 then 243
123 when 244 then 245
124 when 246 then 247
125 when 248 then 249
126 when 250 then 251
127 when 252 then 253
128 when 254 then 255
129 when 256 then 257
130 end x from dual;
when 16 then 17
ERROR at line 9:
ORA-00939: too many arguments for function
SQL> del 129
SQL> /
X
----------

ORA-00600 error in Oracle 10.1.0.5 database

Hi All,
Please help me to get rid of the below mentioned issue.
I am supporting a Oracle 10.1.0.5 prod database. we are getting a below ora-600 error message
ORA-00600: internal error code, arguments: [qerpxSlaveFetch1], [0], [], [], [], [], [], []
I have searched in metalink and there it is stated as bug with the product.
They adviced us to apply the Patch 3897688 or disable parallelism or Upgrade to the fixed release, 10gR2.
The patch 3897688 is not for window platform. Upgrade to 10gR2 is not possible in near future.
So please help me how to disable parallelism in 10g database.

ok fine satish will ask our development team to try your suggestion.
Can you please tell me whether the following init parameters we can use to disable parallelism?
PARALLEL_AUTOMATIC_TUNING = FALSE
PARALLEL_SERVER=FALSE (this alone will disable Parallel Execution)
PARALLEL_MIN_SERVERS=0 (this is additional restriction)
PARALLEL_MAX_SERVERS=0 (this is additional restriction)
Regards,
Aruna

ORA-12157 when installing Oracle 10g on Fedora 5?

Hi, Im installing Oracle 10g on Fedora 5, I did it once, but when I tried to set it up again I
got this error on the last part of the install...
ORA-12157: TNS: internal network communication error
Anybody know what might cause this?
I think I have installed all required RPMs and set environment variables, kernel parameters,
created oracle users and groups as needed, but still get the above error. I searched the error and some claim it is a problem using newer glibc 2.4.4, so I tried installing on Fedora 4 and had the same error even with glibc 2.3???
Thanks so much,
Jon

Oracle Database 10g Release 2 (10.2.0.1) Installation On Fedora Core 5 (FC5 X86) Step by Step
This is a Server Installation with a minimum of 2G swap, secure Linux disabled and the following package groups installed:
Editors
Graphical Internet
Administration Tools
Base
X Window System
System Tools
Server Configuration Tools
GNOME Desktop Environment
Development Libraries
Development Tools
Legacy Development Support
Legacy Server Support
Alternative installations may require more packages to be loaded, in addition to the ones listed below.
Download Software
Unpack Files
Hosts File
Set Kernel Parameters
Setup
Installation
Post Installation
Download Software
Download the following software:
Oracle Database 10g Release 2 (10.2.0.1) Software
openmotif21-2.1.30-14.i386.rpm
Unpack Files
Unzip the files:
unzip 10201_database_linux32.zipYou should now have a single directory containing installation files. Depending on the age of the download this may either be named "db/Disk1" or "database".
Hosts File
The /etc/hosts file must contain a fully qualified name for the server:
<IP-address> <fully-qualified-machine-name> <machine-name>Set Kernel Parameters
Add the following lines to the /etc/sysctl.conf file:
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
# semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default=262144
net.core.rmem_max=262144
net.core.wmem_default=262144
net.core.wmem_max=262144Run the following command to change the current kernel parameters:
/sbin/sysctl -pAdd the following lines to the /etc/security/limits.conf file:
* soft nproc 2047
* hard nproc 16384
* soft nofile 1024
* hard nofile 65536Add the following line to the /etc/pam.d/login file, if it does not already exist:
session required /lib/security/pam_limits.soDisable secure linux by editing the /etc/selinux/config file, making sure the SELINUX flag is set as follows:
SELINUX=disabledAlternatively, this alteration can be done using the GUI tool (Desktop > System Settings > Security Level). Click on the SELinux tab and disable the feature.
Setup
Install the following packages:
# From Fedora Core 5 DVD
cd /media/dvd/Fedora/RPMS
rpm -Uvh setarch-*
rpm -Uvh --force tcl-*
rpm -Uvh libXp-*
rpm -Uvh openmotif-2*
rpm -Uvh compat-db-*
rpm -Uvh compat-libstdc++-33*
rpm -Uvh compat-libf2c-32-*
rpm -Uvh compat-gcc-32-*
rpm -Uvh libaio-*
rpm -Uvh compat-gcc-32-c++-*
rpm -Uvh compat-libstdc++-296*
rpm -Uvh compat-libgcc-296*
# From download
rpm -Uvh openmotif21-2.1.30-14.i386.rpmCreate the new groups and users:
groupadd oinstall
groupadd dba
groupadd oper
useradd -g oinstall -G dba oracle
passwd oracleCreate the directories in which the Oracle software will be installed:
mkdir -p /u01/app/oracle/product/10.2.0/db_1
chown -R oracle.oinstall /u01Login as root and issue the following command:
xhost +<machine-name>Edit the /etc/redhat-release file replacing the current release information (Fedora Core release 5 (Bordeaux)) with the following:
redhat-4Login as the oracle user and add the following lines at the end of the .bash_profile file:
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1; export ORACLE_HOME
ORACLE_SID=TSH1; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/jre:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fiInstallation
Log into the oracle user. If you are using X emulation then set the DISPLAY environmental variable:
DISPLAY=<machine-name>:0.0; export DISPLAYStart the Oracle Universal Installer (OUI) by issuing the following command in the database directory:
./runInstallerEnter the appropriate ORACLE_HOME and name then continue with the installation.
During the installation, before the linking phase, edit the contents of the "$ORACLE_HOME/bin/gennttab" file, amending the following entries:
# Change this...
LIB=`$ECHO ${TtoLIB} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
INI=`$ECHO ${TtoINI} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
BAS=`$ECHO ${TtoBAS} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
# To this...
LIB=`$ECHO ${TtoLIB} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
INI=`$ECHO ${TtoINI} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
BAS=`$ECHO ${TtoBAS} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`If you don't do this the ntcontab will hang indefinitely during the linking phase.
Post Installation
Edit the /etc/redhat-release file restoring the original release information:
Fedora Core release 5 (Bordeaux)Finally edit the /etc/oratab file setting the restart flag for each instance to 'Y':
TSH1:/u01/app/oracle/product/10.2.0/db_1:Y
Ref.: http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnFedora5.php

Impdp error in Oracle 10g

While importing a 22 GB dump file ,exported from producation db without any errors, into a local server,I am getting the following errors as per the log:
opyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "ERRE"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "ERRE"."SYS_IMPORT_FULL_01": 'ERRE/********@ecprod' full=y remap_schema=ERRE:ERRE,essc:essc,EPPA:EPPA directory=dba_dir dumpfile=dump01.dmp LOGFILE=LOG01.LOG
Processing object type SCHEMA_EXPORT/USER
ORA-31684: Object type USER:"essc" already exists
ORA-31684: Object type USER:"ERRE" already exists
ORA-31684: Object type USER:"EPPA" already exists
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/SYNONYM/SYNONYM
Processing object type SCHEMA_EXPORT/TYPE/TYPE_SPEC
Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
Processing object type SCHEMA_EXPORT/SEQUENCE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
. . imported "ERRE"."ER_PATFORMS" 19.34 GB 48582 rows
. . imported "ERRE"."ER_FORMAUDITCOL" 341.6 MB 3406926 rows
. . imported "ERRE"."ER_USERSESSIONLOG" 191.1 MB 636744 rows
. . imported "ERRE"."ER_FORMLIBVER" 184.2 MB 292 rows
ORA-31693: Table data object "ERRE"."ER_FORMLIB" failed to load/unload and is being skipped due to error:
ORA-29913: error in executing ODCIEXTTABLEFETCH callout
ORA-00600: internal error code, arguments: [klxpr_03], [1], [], [], [], [], [], []
ORA-31693: Table data object "ERRE"."ER_FORMSLINEAR" failed to load/unload and is being skipped due to error:
ORA-02354: error in exporting/importing data
ORA-02368: file is not valid for this load operation
ORA-31693: Table data object "ERRE"."AUDIT_INSERT" failed to load/unload and is being skipped due to error:
ORA-02354: error in exporting/importing data
ORA-02368: file is not valid for this load operation
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31672: Worker process DW01 died unexpectedly.
Job "ERRE"."SYS_IMPORT_FULL_01" stopped due to fatal error at 11:40:07
ORA-39014: One or more workers have prematurely exited.
Any help is really appreciable as taking an export again is not an option for me.....

Only one ref. in the Support website : Datapump Import Errors With ORA-600 klxpr_03 ID 741861.1*
Bug unresolved yet. You should raise a SR to get advices.
Nicolas.

ORA-01552 error in Oracle 10g DB!!!

Similar Messages

Maybe you are looking for