ORA-15077: could not locate ASM instance serving a required diskgroup
My cluster is gone...
due to restart of the network, the cluster fenced node2 from my configuration. Since the evicting, the cluster is not starting any more.
ocrcheck
PROT-602: Failed to retrieve data from the cluster registry
PROC-26: Error while accessing the physical storage
ORA-15077: could not locate ASM instance serving a required diskgroup
The OCR Disks are within ASM.
Oracleasm does see the disks
crsctl query css votedisk is also giving the correct information about the votingsdisks which are also in the same OCR diskgroup
crsctl query css votedisk
## STATE File Universal Id File Name Disk group
1. ONLINE 0eb6aaa85e5c4fd6bf9d0481cfd7d517 (ORCL:VOTE1) [OCR]
2. ONLINE 5a66449fbada4f34bf0c3be4574f03bc (ORCL:VOTE2) [OCR]
3. ONLINE 76ad295ebc054f07bfea124fb08da432 (ORCL:VOTE3) [OCR]
Located 3 voting disk(s).
Any ideas why the cluster is not starting anymore ? I am afraid of restarting node 1...
chris
Really would help to know what operating system you are using...
When you set up the disks for use with ASM, did you stamp them with ASMLIB? If not, did you configure device persistance with udev? Without using one of these methods, the disk identification can change when a node is restarted, and ASM is then unable to locate the disks.
Similar Messages
-
Getting error 'could not locate ASM instance' when make copy of ASM VM
Hi everyone,
I make virtual machine of OEL 5.7 with oracle 10.2.0.1 and successfully configured ASM instance. I am using vmware workstation.
Now when I make copy of this virtual machine and startup database, then I get the below error:
[oracle@oelinux ~]$ export ORACLE_SID=asmdb
[oracle@oelinux ~]$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Sep 29 01:10:26 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+ASMGROUP/asmdb/spfileasmdb.ora'
*ORA-17503: ksfdopn:2 Failed to open file +ASMGROUP/asmdb/spfileasmdb.ora*
ORA-15077: could not locate ASM instance serving a required diskgroup
So how can i solve this problem??
Note: I copy this VM using both copy/paste and clone option, but get this error both times.
Regards,
Khurram BhattiEdStevens wrote:
Khurram Shehzad wrote:
I add 3 SCSI vmware disks. and then use them as a raw device. no ASMLib is used.
I refer below tutorial
[http://www.oracle-base.com/articles/10g/asm-using-asmlib-and-raw-devices.php]
That tutorial picks up after you created the disks.
How did you create the virtual disks attatched to your vm? What are its properties - from VMWorksation's perspective.
How did you create the "copy" of the vm?
It depends on how you actually created the disks, at the vm level, not the partitioning and formatting at the vm's OS level. I've used Tim's tutorials myself on some other ASM related projects, and he typically has you create the ASM disks as 'sharable', which would mean they would not copy necessarily copy with the vm. I've not played around the with variants much, but I'm pretty sure what you are seeing is a result of either the way the disk was created in the original vm, or the way you made the copy of the vm, or both.
Take a look at the machine properties of the two vms in the VMWorkstation control panel, looking at the HDD definitions. Compare and contrast.Hi EdStevens,
My problem resolved with below steps. Thanks fro your replies.
export ORACLE_SID=+ASM
sqlplus sys as sysdba
Connected to an idle instance.
SQL> startup mount
SQL> alter system register;
SQL> exit
[oracle@oelinux ~]$ export ORACLE_SID=asmdb
[oracle@oelinux ~]$ sqlplus sys as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Regards,
Khurram -
"Could not locate remote server" Error Message
I had to reinstall Adobe Photoshop Elements 5.0 after a virus destroyed my system. Now, when I open Editor (from "Full Edit" in Organizer), I get the following error message:
"Could not locate remote server
http:///???%12?%C3%AF???????????????%12?%12?g"
This problem did not exist before the reinstall. What can I do to stop this error message from being triggered?
Thanks!I would suggest a complete reinstallation of the software. First uninstall the software using windows uninstaller and then comfirm if the folder c:\Program Files (x86)\Adobe\Photoshop Elements 5\ or c:\Program Files\Adobe\Photoshop Elements 5 whichever applicable has been deleted. After this, install the PSE again
-
Could not connect to SQL Server 2012 Remotely
Hello,
I have a situation as follows:
The Server
SQL Server 2012 Standard Edition installed on Windows Server 2012 Standard Edition
Active Directory is installed on the same server as well
Remote Access Role added and configured to connect VPN
DNS Role added
Windows Firewall is disabled
The Server is connected to the internet
SQL Server Service & SQL Browser both are running under domain accounts
SQL Server allows remote connections
The Router
The router that connects the server to the Internet is configured to:
Enable VPN Tunnels Protocols (PPTP, L2TP and IPSec)
Forwarding > Virtual Servers (all requests on TCP and UDP on all ports to the server local IP)
The Client
PC running Windows 7 SP1 with SQL Server 2012 Express
Joined AD on the server
Connected to the internet
VPN Connected to the Server
Can Remote Desktop the Server
Can ping the server host name
Can nslookup the server host name
The Problem
If Both the Server and the Client are connected in the same Local Area Network, Client can connect to the SQL Serve
Once the Client is placed in different location connected to the Interent, VPN connected as described above, I could not connect to the Server using:
Windows Authentication Domain Users or
SQL Server users
and the error message is:
Cannot connect to SERVER\SQLINSTANCE.
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
Any thoughts
Thanks in advance
Hello Hilary,
I have been working on a small replication test.
On the Publisher, things went smooth and the Snapshot Agent was able to work and produce a snapshot written in a shared folder located on the Publisher
On the Subscriber, as I am testing from SQL Server Express, I had run the following command:
replmerg.exe -Publisher [SERVER\SQLInstance] -PublisherDB [dbRepl] -PublisherSecurityMode 0 -PublisherLogin rplMergeAgent -PublisherPassword p@ssw0rd -Publication [TEST Publication] -Distributor [SERVER\SQLInstance] -DistributorSecurityMode 0 -DistributorLogin
rplMergeAgent -DistributorPassword p@ssw0rd -Subscriber [SUBSCRIBER\SQLInstance] -SubscriberSecurityMode 0 -SubscriberLogin rplMergeAgent -SubscriberPassword p@ssw0rd -SubscriberDB [dbRepl] -SubscriptionType 1 -OutputVerboseLevel 2 -Output C:\TEMP\mergeagent.log
Where
SERVER
Publisher and Distributor
dbRepl
Database to replicate
Merge Agent
rplMergeAgent
Subscriber
SUBSCRIBER
dbRepl
Subscriber Database
Merge Agent
rplMergeAgent
Password
p@ssw0rd
rplMergeAgent
SQL Login defined in both Publisher and Subscriber with same password
Granted the following at Publisher:
Login to Publication Database (dbRepl)
Login to Distribution Database (distribution)
Member of PAL
Granted the following at Subscriber:
db_owner fixed database role in Subscription database (dbRepl)
I couldn't grant rplMergeAgent Read Permission on SnapshotFolder as it is only a SQL Login.
When I ran the above command line, I received the following error:
Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
I am pasting below the whole log file written by the above command:
2014-04-11 15:38:07.205 Microsoft SQL Server Merge Agent 11.0.2218.0
2014-04-11 15:38:07.342 Copyright (c) 2008 Microsoft Corporation
2014-04-11 15:38:07.389
2014-04-11 15:38:07.406 The timestamps prepended to the output lines are expressed in terms of UTC time.
2014-04-11 15:38:07.433 User-specified agent parameter values:
-Publisher SERVER\SQLInstance
-PublisherDB dbRepl
-PublisherSecurityMode 0
-PublisherLogin rplMergeAgent
-PublisherPassword **********
-Publication TEST Publication
-Distributor SERVER\SQLInstance
-DistributorSecurityMode 0
-DistributorLogin rplMergeAgent
-DistributorPassword **********
-Subscriber SUBSCRIBER\SQLInstance
-SubscriberSecurityMode 0
-SubscriberLogin rplMergeAgent
-SubscriberPassword **********
-SubscriberDB dbRepl
-SubscriptionType 1
-OutputVerboseLevel 2
-Output C:\TEMP\mergeagent.log
2014-04-11 15:38:07.497 Percent Complete: 0
2014-04-11 15:38:07.517 Connecting to Subscriber 'SUBSCRIBER\SQLInstance'
2014-04-11 15:38:07.518 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
2014-04-11 15:38:07.608 OLE DB Subscriber: SUBSCRIBER\SQLInstance
DBMS: Microsoft SQL Server
Version: 10.50.4000
catalog name: dbRepl
user name: rplMergeAgent
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2014-04-11 15:38:07.613 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': select SERVERPROPERTY ('ProductVersion')
2014-04-11 15:38:07.617 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select
collationproperty(@collation, N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) &
0x1 = 0x1 then 0 else 1 end as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
2014-04-11 15:38:07.637 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {?=call sp_helpsubscription_properties (N'SERVER\SQLInstance', N'dbRepl', N'TEST Publication')}
2014-04-11 15:38:07.681 Distributor security mode: 0, login name: rplMergeAgent, password: ********.
2014-04-11 15:38:07.682 Percent Complete: 0
2014-04-11 15:38:07.683 Connecting to Distributor 'SERVER\SQLInstance'
2014-04-11 15:38:07.684 Connecting to OLE DB Distributor at datasource: 'SERVER\SQLInstance', location: '', catalog: '', providerstring: '' using provider 'SQLNCLI11'
2014-04-11 15:38:25.062 OLE DB Distributor: SERVER\SQLInstance
DBMS: Microsoft SQL Server
Version: 11.00.2100
catalog name:
user name: guest
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2014-04-11 15:38:28.887 OLE DB Distributor 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion')
2014-04-11 15:38:29.842 OLE DB Distributor 'SERVER\SQLInstance': {call sp_helpdistpublisher (N'SERVER\SQLInstance') }
2014-04-11 15:38:32.198 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
2014-04-11 15:38:33.199 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_merge_agentid (0,N'dbRepl',N'TEST Publication',null,N'dbRepl',100,N'SUBSCRIBER\SQLInstance')}
2014-04-11 15:38:34.451 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:38:34.560 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_profile (23, 4, N'')}
2014-04-11 15:38:36.189 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:38:36.499 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_get_redirected_publisher(N'SERVER\SQLInstance',N'dbRepl',0)}
2014-04-11 15:38:37.396 Percent Complete: 0
2014-04-11 15:38:37.396 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:38:37.399 Initializing
2014-04-11 15:38:37.401 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:38:37.403 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
2014-04-11 15:38:38.427 Percent Complete: 0
2014-04-11 15:38:38.428 Validating publisher
2014-04-11 15:38:38.429 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:38:39.455 Percent Complete: 0
2014-04-11 15:38:39.456 Connecting to Publisher 'SERVER\SQLInstance'
2014-04-11 15:38:39.457 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:38:46.548 OLE DB Publisher: SERVER\SQLInstance
DBMS: Microsoft SQL Server
Version: 11.00.2100
catalog name: dbRepl
user name: rplMergeAgent
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2014-04-11 15:38:50.282 OLE DB Publisher 'SERVER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select collationproperty(@collation,
N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end
as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
2014-04-11 15:38:57.393 OLE DB Publisher 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion')
2014-04-11 15:38:59.236 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
2014-04-11 15:39:07.271 OLE DB Publisher: SERVER\SQLInstance
DBMS: Microsoft SQL Server
Version: 11.00.2100
catalog name: dbRepl
user name: rplMergeAgent
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2014-04-11 15:39:45.229 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:39:45.234 Percent Complete: 0
2014-04-11 15:39:45.235 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:39:45.236 Retrieving publication information
2014-04-11 15:39:45.238 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:39:46.287 Percent Complete: 0
2014-04-11 15:39:46.288 Retrieving subscription information.
2014-04-11 15:39:46.290 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:40:00.472 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:40:00.478 Percent Complete: 0
2014-04-11 15:40:00.479 Applying the snapshot to the Subscriber
2014-04-11 15:40:00.480 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:40:02.535 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
2014-04-11 15:40:03.559 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_mergesubentry_indistdb (0,N'SERVER\SQLInstance',N'dbRepl',N'TEST Publication',N'SUBSCRIBER\SQLInstance',N'dbRepl',1,1,0,N'',?,90)}
2014-04-11 15:40:04.600 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
2014-04-11 15:40:04.609 OLE DB Subscriber: SUBSCRIBER\SQLInstance
DBMS: Microsoft SQL Server
Version: 10.50.4000
catalog name: dbRepl
user name: rplMergeAgent
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2014-04-11 15:40:04.611 OLE DB Subscriber: SUBSCRIBER\SQLInstance
DBMS: Microsoft SQL Server
Version: 10.50.4000
catalog name: dbRepl
user name: rplMergeAgent
API conformance: 0
SQL conformance: 0
transaction capable: 1
read only: F
identifier quote char: "
non_nullable_columns: 0
owner usage: 15
max table name len: 128
max column name len: 128
need long data len:
max columns in table: 1000
max columns in index: 16
max char literal len: 131072
max statement len: 131072
max row size: 131072
2014-04-11 15:40:07.454 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSacquiresnapshotdeliverysessionlock
2014-04-11 15:40:07.526 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MStrypurgingoldsnapshotdeliveryprogress
2014-04-11 15:40:07.530 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSissnapshotitemapplied @snapshot_session_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\', @snapshot_progress_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST
PUBLICATION\20140411082109\Person_2.sch'
2014-04-11 15:40:24.659 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSreleasesnapshotdeliverysessionlock
2014-04-11 15:40:24.663 The schema script 'Person_2.sch' could not be propagated to the subscriber.
2014-04-11 15:40:24.665 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:40:24.690 Percent Complete: 18
2014-04-11 15:40:24.692 The schema script 'Person_2.sch' could not be propagated to the subscriber.
2014-04-11 15:40:24.693 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2014-04-11 15:40:27.541 Percent Complete: 0
2014-04-11 15:40:27.542 Category:NULL
Source: Merge Replication Provider
Number: -2147201001
Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
2014-04-11 15:40:28.563 Percent Complete: 0
2014-04-11 15:40:28.565 Category:AGENT
Source: SUBSCRIBER\SQLInstance
Number: 0
Message: The process could not read file '\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\Person_2.sch' due to OS error 1326.
2014-04-11 15:40:28.566 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
2014-04-11 15:40:28.568 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
2014-04-11 15:40:28.569 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
2014-04-11 15:40:28.570 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
2014-04-11 15:40:28.571 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
2014-04-11 15:40:28.573 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
2014-04-11 15:40:28.575 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
2014-04-11 15:40:28.577 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
2014-04-11 15:40:28.578 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
2014-04-11 15:40:28.579 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
I can say it is about how can the rplMergeAgent read the Shared folder.
What do you think? -
Wndows could not start the SQL Server (MSSQLSERVER) service on Local computer
I have 2 instance of SQL Server in same server. A is installed first and B next.
Somehow A cannot start at all when I try to start from Windows Services.
B can be started normally.
A worked normally week ago. There has been only one thing what I may have to server since that.
I have installed MondoDB. Currently MondoDB it is stopped.
windows could not start the SQL Server (MSSQLSERVER) service on Local computer
Error 31: A device attached to the system is not functioning.
Kenny_II don't see anything special in event logs.
Data file of both SQL Server instance are located on same C drive of same server.
Kenny_I
Hello Kenny,
The main issue is not related to SQL server .SQL is at receiving end its hardware or the cables ( not sure which one) are the one causing issue.
I serached
http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/111da2ae-0a86-41a5-ba03-7d1c0cc91ea9/windows-error-code-31a-device-attached-to-the-system-is-not-functioning-properly?forum=wdk
http://www.chicagotech.net/netforums/viewtopic.php?f=1&t=6467
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
10g Admin/Desktop error :could not locate or parse the .dbc file error
Hi there,
can any one help me how to fix this error i get this while connecting to Discoverer Admin/Desktop edition 10g ver 10.1.2
Unable to connect to: username@crp2
Failed to connect to database - could not locate or parse the .dbc file
c:\oracle\BIToolsHome_1\discoverer\secure\us-oracle3.dbc corresponding to the given Oracle Applications instance
i had created the system environment variable FND_SECURE and i've placed the .dbc files in the folder (C:\oracle\BIToolsHome_1\discoverer\secure)
but, i still get error
Thanks,
MaxHi Russ
Here's some additional info from my own library:
1. Set or check the following registry settings on your Admin PC:
HKEY_CURRENT_USER\Software\Oracle\Discoverer 10\Database\EnableTriggers should be DWORD with a value of 1
HKEY_CURRENT_USER\Software\Oracle\Discoverer 10\Database\DefaultPreserveDisplayPropertyForRefresh should be a DWORD with a value of 1
2. You need to create for yourself a folder called SECURE under your ORACLE folder:
e.g. mkdir c:\oracle\secure
3. Copy the DBC File from the E-Business Suite database and place it in the secure directory. It will be located in the TOP directory in the database.
4. Create a Windows System Variable FND_SECURE with the value as in step 2 above: e.g. c:\oracle\secure
5. Update your %ORACLE_HOME%/network/admin/tnsnames.ora to include an entry for the E-Business Suite database. The database name must match the two_task entry in the dbc file.
6. You may have to rename the dbc file so that it matches the name by which you are referring to that database in your TNS Names file
Does this help?
Best wishes
Michael -
Error : disp+work.exe in stopped : Could not locate entry in sysdatabases
SM 3.2 was installed on SQL Server 2000.After trying to start SAP System via SAPMMC I saw that disp+work.exe can't start properly : after 3 seconds green light there appeared grey light. Message server and IGS WatchDog work OK -green light
Error in SAPMMC Syslog : "DB-Connect Failed, Return Code 000256".
SQL Server is running.
The log trans.log after running command "r3trans -d"
is following:
Could not locate entry in sysdatabases for database 'SMN'. No entry found with that name. Make sure that the name is entered correctly.
4 ETW000 147 0.031163
4 ETW000 [dev trc ,00000] sloledb.cpp [ExecuteAndFlush,line 5597]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'SMN'. No entry found with that name. Make sure that the name is entered correctly.
4 ETW000 69 0.031232
4 ETW000 [dev trc ,00000] OpenOledbConnection : Failed to switch to specified database SMN
How could I solve this problem ?
Thank You!Thank You for helping me
dev_disp:
trc file: "dev_disp", trc level: 1, release: "640"
Fri Apr 28 14:22:48 2006
kernel runs with dp version 127000(ext=102000) (@(#) DPLIB-INT-VERSION-127000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 10
intno 20020600
make: multithreaded, Unicode
pid 2996
***LOG Q00=> DpSapEnvInit, DPStart (00 2996) [dpxxdisp.c 1093]
shared lib "dw_xml.dll" version 10 successfully loaded
shared lib "dw_xtc.dll" version 10 successfully loaded
shared lib "dw_stl.dll" version 10 successfully loaded
shared lib "dw_gui.dll" version 10 successfully loaded
Fri Apr 28 14:22:52 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3880]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2506872 (12472)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04320040, size: 2919328)
DpShMCreate: allocated sys_adm at 04320040
DpShMCreate: allocated wp_adm at 04321B58
DpShMCreate: allocated tm_adm_list at 04324478
DpShMCreate: allocated tm_adm at 043244A0
DpShMCreate: allocated wp_ca_adm at 04588518
DpShMCreate: allocated appc_ca_adm at 0458E2D8
DpShMCreate: allocated comm_adm_list at 04590218
DpShMCreate: allocated comm_adm at 04590230
DpShMCreate: allocated vmc_adm_list at 045D6F00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 045D6F28
DpShMCreate: allocated wall_adm at 045D6F30
MBUF state OFF
Fri Apr 28 14:22:53 2006
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1132 MB
<ES> 1131 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1455]
***LOG Q0K=> DpMsAttach, mscon ( r3demo24) [dpxxdisp.c 9701]
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 10
Release check o.K.
Fri Apr 28 14:23:33 2006
ERROR => W0 (pid 3932) died [dpxxdisp.c 12152]
ERROR => W1 (pid 2680) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3336) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 2072) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 940) died [dpxxdisp.c 12152]
ERROR => W5 (pid 900) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2592) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3420) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3932 (SIGUSR2)
ERROR => DpWpKill(3932, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-2680 (SIGUSR2)
ERROR => DpWpKill(2680, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3336 (SIGUSR2)
ERROR => DpWpKill(3336, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-2072 (SIGUSR2)
ERROR => DpWpKill(2072, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-940 (SIGUSR2)
ERROR => DpWpKill(940, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-900 (SIGUSR2)
ERROR => DpWpKill(900, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2592 (SIGUSR2)
ERROR => DpWpKill(2592, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-3420 (SIGUSR2)
ERROR => DpWpKill(3420, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1649
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 28 14:23:43 2006
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Fri Apr 28 11:23:43 2006
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3932 Ended no 1 0 0
1 DIA 2680 Ended no 1 0 0
2 UPD 3336 Ended no 1 0 0
3 ENQ 2072 Ended no 1 0 0
4 BTC 940 Ended no 1 0 0
5 BTC 900 Ended no 1 0 0
6 SPO 2592 Ended no 1 0 0
7 UP2 3420 Ended no 1 0 0
Dispatcher Queue Statistics Fri Apr 28 11:23:43 2006
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Fri Apr 28 11:23:43 2006
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Apr 28 11:23:43 2006
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1649
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 28 14:23:48 2006
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (1412) (SOFT_KILL)
Stop icman
killing process (532) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:1412 HANDLE:1620)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1649
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Apr 28 14:23:49 2006
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:1412 HANDLE:1620)
[DpProcDied] Process died (PID:532 HANDLE:1612)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'r3demo24'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1628
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2996) [dpxxdisp.c 8460]
Good Bye
<i><u><b>
dev_ms</b></u></i>
trc file: "dev_ms", trc level: 1, release: "640"
[Thr 3872] Fri Apr 28 14:22:47 2006
[Thr 3872] systemid 560 (PC with Windows NT)
[Thr 3872] relno 6400
[Thr 3872] patchlevel 0
[Thr 3872] patchno 7
[Thr 3872] intno 20020600
[Thr 3872] pid 3248
[Thr 3872] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3248) [msxxserv.c 1638]
[Thr 3872] MsHttpInit: full qualified hostname = r3demo24
[Thr 3872] HTTP logging is switch off
[Thr 3872] set HTTP state to LISTEN
[Thr 3872] *** I listen to port sapmsSMN (3601) ***
[Thr 3872] *** HTTP port 8100 state LISTEN ***
[Thr 3872] CUSTOMER KEY: >J0370937238<
[Thr 3872] Fri Apr 28 14:23:49 2006
[Thr 3872] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from r3demo24_SMN_00 [msxxserv.c 4144]
[Thr 3872] Fri Apr 28 14:34:09 2006
[Thr 3872] *** ERROR => MsSCheckConnections: no response from client C1 (163.242.255.14) after 300 secs received [msxxserv.c 2879]
[Thr 3872] *** ERROR => MsSCheckConnections: disconnect now [163.242.255.14] [msxxserv.c 2883]
[Thr 3872] Fri Apr 28 15:41:11 2006
[Thr 3872] MsSExit: received SIGINT (2)
[Thr 3872] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3248) [msxxserv.c 5189]
<u><i>dev_w0</i></u>
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Apr 28 14:22:54 2006
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SMN\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\SMN\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\SMN\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.7)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 10
M intno 20020600
M make: multithreaded, Unicode
M pid 3932
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3932) [dpxxdisp.c 1153]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 10528 (1316)
M DpShMCreate: sizeof(tm_adm) 2506872 (12472)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (372)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 04320040, size: 2919328)
M DpShMCreate: allocated sys_adm at 04320040
M DpShMCreate: allocated wp_adm at 04321B58
M DpShMCreate: allocated tm_adm_list at 04324478
M DpShMCreate: allocated tm_adm at 043244A0
M DpShMCreate: allocated wp_ca_adm at 04588518
M DpShMCreate: allocated appc_ca_adm at 0458E2D8
M DpShMCreate: allocated comm_adm_list at 04590218
M DpShMCreate: allocated comm_adm at 04590230
M DpShMCreate: allocated vmc_adm_list at 045D6F00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 045D6F28
M DpShMCreate: allocated wall_adm at 045D6F30
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Fri Apr 28 14:22:55 2006
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [r3demo24\SMN] <> Prof(dbs/mss/server) [r3demo24\smn]. Profile value will be used.
C Warning: Env(MSSQL_DBNAME) [SMN] <> Prof(dbs/mss/dbname) [smn]. Profile value will be used.
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\SMN\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 7
C patchcomment MSSQL: Row handles must all be released (719273)
C Local connection used on R3DEMO24 to named instance: np:r3demo24\smn
C Using Provider SQLOLEDB
C ExecuteAndFlush return code: 0x80004005 Stmt: [use smn ]
C ExecuteAndFlush: line 5597. hr: 0x80004005 Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C sloledb.cpp [ExecuteAndFlush,line 5597]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C OpenOledbConnection : Failed to switch to specified database smn
C Using Provider SQLOLEDB
C ExecuteAndFlush return code: 0x80004005 Stmt: [use smn ]
C ExecuteAndFlush: line 5597. hr: 0x80004005 Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C sloledb.cpp [ExecuteAndFlush,line 5597]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C OpenOledbConnection : Failed to switch to specified database smn
C Using Provider SQLOLEDB
C ExecuteAndFlush return code: 0x80004005 Stmt: [use smn ]
C ExecuteAndFlush: line 5597. hr: 0x80004005 Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C sloledb.cpp [ExecuteAndFlush,line 5597]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C OpenOledbConnection : Failed to switch to specified database smn
C failed to establish conn to np:r3demo24\smn.
C Retrying without protocol specifier: r3demo24\smn
C Using Provider SQLOLEDB
C ExecuteAndFlush return code: 0x80004005 Stmt: [use smn ]
C ExecuteAndFlush: line 5597. hr: 0x80004005 Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C sloledb.cpp [ExecuteAndFlush,line 5597]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C OpenOledbConnection : Failed to switch to specified database smn
C Using Provider SQLOLEDB
C ExecuteAndFlush return code: 0x80004005 Stmt: [use smn ]
C ExecuteAndFlush: line 5597. hr: 0x80004005 Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C sloledb.cpp [ExecuteAndFlush,line 5597]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C OpenOledbConnection : Failed to switch to specified database smn
C Using Provider SQLOLEDB
C ExecuteAndFlush return code: 0x80004005 Stmt: [use smn ]
C ExecuteAndFlush: line 5597. hr: 0x80004005 Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C sloledb.cpp [ExecuteAndFlush,line 5597]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'smn'. No entry found with that name. Make sure that the name is entered correctly.
C OpenOledbConnection : Failed to switch to specified database smn
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#1 @ 1200] [dbsh 1200 ]
B ***LOG BY0=> <message text not available> [dbsh#1 @ 1200] [dbsh 1200 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> <message text not available> [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1270]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9377]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server r3demo24_SMN_00 on host r3demo24 (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Fri Apr 28 14:22:55 2006
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9553
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 728]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 245]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3932) [dpnttool.c 357]
May be this information coul help
Thank You a lot! -
Toad Error Could not locate oci dll
Hi,
I have edit my tnsnames file as follows:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
Now when i try to connet to the database using SCOTT/TIGER it gives me error initialization error could not locate OCI dll .
Please can anyone help....Hi Vishal
I am using Toad 7.6 i am able to connect with scott/tiger with my database orcl.
These are my Environment tabs. Do i have to change anything here or add anything.
TNS_ADMIN C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN
PERL5LIB C:\oracle\product\10.2.0\db_1\perl\5.8.3\lib\MSWin32-x86;C:\oracle\product\10.2.0\db_1\perl\5.8.3\lib;C:\oracle\product\10.2.0\db_1\perl\5.8.3\lib\MSWin32-x86;C:\oracle\product\10.2.0\db_1\perl\site\5.8.3;C:\oracle\product\10.2.0\db_1\perl\site\5.8.3\lib;C:\oracle\product\10.2.0\db_1\sysman\admin\scripts; -
The crawler could not communicate with the server.
valmiki
Hi,
According to your post, my understanding is that you get an error when communicating to the server.
1. This happens when crawler is not able to connect to the server. Make sure server name is correct and your crawl account should have the Full Read permission on the User Policy at the Web Application level. It should not have any specific
permission on any site collection.
Couple of steps to troubleshoot it:
a. You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
Ping <servername>
b. You should be able to connect to the server using telnet command
Telnet< servername> <port number>
https://social.technet.microsoft.com/Forums/en-US/01b6cdda-ca38-46c1-be07-2e89eb91271f/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the?forum=sharepointsearchprevious
2. Can you browse to the WebApp from the server that is performing the Crawl? The issue is usually the most typical is the LoopBackCheck.
Click Start, click Run, type regedit, and then click OK.
In Registry Editor, locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0
Right-click MSV1_0, point to New, and then click Multi-String Value.
Type BackConnectionHostNames, and then press ENTER.
Right-click BackConnectionHostNames, and then click Modify.
In the Value data box, type the host name or the host names for the sites that are on the local computer, and then click OK.
Quit Registry Editor, and then restart the IISAdmin service.
https://social.technet.microsoft.com/Forums/en-US/f378c45f-fa8b-48f3-88bb-739f3cd27830/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the?forum=sharepointadminprevious
3. Checked WinProxy to see configured proxy:
C:\Windows\system32>NetSH WinHTTP Show Proxy
Run NetSH WinHTTP Reset Proxy
Restart server and test again.
https://social.technet.microsoft.com/Forums/en-US/1baa6fd5-acc7-4cda-b7cb-7fa86aa8101f/the-crawler-could-not-communicate-with-the-server?forum=sharepointsearchprevious
4. The web.config file of the crawled web application contains an error.
The target site collection contains a web part error for instance on the default.aspx.
Also check the solution are not deployed correctly.Central Administration -> Solution Management (Manage Farm Solutions).
https://sharepointsriram.wordpress.com/2011/12/10/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the-firewall-access-is-configured-correctly/
If the issue still exists, you can try to delete the old search application and recreate from the beginning.
You can also reset the index and do a full crawl after.
For more information about this similar issue, you can refer to:
http://sharepointroot.com/2012/03/16/sharepoint-search-the-crawler-could-not-communicate-with-the-server/
http://www.sharepointed.com/2013/08/13/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the-firewall-access-is-configured-correctly/
http://www.information-worker.nl/2011/01/11/the-crawler-could-not-communicate-with-the-server/
https://social.technet.microsoft.com/Forums/en-US/0e7ffd07-c584-4767-a2bc-ce3a014255c6/the-crawler-could-not-communicate-with-the-server-check-that-the-server-is-available-and-that-the?forum=sharepointadminprevious
Best Regards,
Yumi Fu -
How can I correct the issue of Safari not connecting on my iPad Air? It was working great 2 days ago.....now on September 20 it is not working! I have an internet connection but Safari will not open. "Safari cannot open the page because it could not connect to the server."
Hello Beckieor,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
iOS: Troubleshooting Wi-Fi networks and connections
Follow these steps to troubleshoot the above issues:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
EAS server error: Could not connect to administration Server
Hi,
I have installed Hyperion suite in Windows server 2008 R2. It was working fine but now when i tried to login in to the EAS console, I am getting the following error:
"Server Error: Could not connect to administration server".
I tried accessing the same through the web URL and I found "404 error - file or directory not found".
I verified all my services are up and running fine. I am able to connect to the essbase sever through Excel as well as planning.
The log retireved from the HyS9eas-sysout.log file is below:
<Sep 11, 2013 7:06:56 AM JST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Sep 11, 2013 7:06:57 AM JST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Sep 11, 2013 7:06:58 AM JST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Sep 11, 2013 7:07:04 AM JST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 >
<Sep 11, 2013 7:07:15 AM JST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<Sep 11, 2013 7:07:15 AM JST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Sep 11, 2013 7:07:15 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Sep 11, 2013 7:07:15 AM JST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log00410. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log.>
<Sep 11, 2013 7:07:16 AM JST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log is opened. All server side log events will be written to this file.>
<Sep 11, 2013 7:07:48 AM JST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Sep 11, 2013 7:07:56 AM JST> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EssbaseAdminServices0 has been migrated to backup server and the backup server is accessing the TLOG of EssbaseAdminServices0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getDomainConfiguration()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getRuntimeService()
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
return com.bea:Name=EPMSystem,Type=Domain
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
Calling getRuntimeService()
return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Calling getConnection()
return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\registry_update.xml file
EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
Template for EAS#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar
Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM Calcmgr, Oracle EPM Planning libraries, Oracle EPM EAS libraries, Oracle EPM Misc libraries, Oracle EPM Xerces libraries]
BPMUI shared webapp not referenced from EAS#11.1.2.0
Application name: EAS#11.1.2.0
Application source: eas.ear
Server name: EssbaseAdminServices0
Server port: 10080
Server SSL port: 10083
Application context: eas
Registry product type: ESSBASE_PRODUCT
Registry physical web application type: ADMIN_SERVICES_WEB_APP
weblogic.Name property is 'EssbaseAdminServices0', seems to be WebLogic mode
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Executing pre custom update for EAS#11.1.2.0
EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
<Sep 11, 2013 7:09:06 AM JST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'EAS [Version=11.1.2.0]' due to error java.lang.NullPointerException.
java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
Truncated. see log file for complete stacktrace
>
<Sep 11, 2013 7:09:06 AM JST> <Emergency> <Deployer> <BEA-149259> <Server 'EssbaseAdminServices0' in cluster 'EssbaseAdminServices' is being brought up in administration state due to failed deployments.>
<Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>
<Sep 11, 2013 7:09:22 AM JST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
<Sep 11, 2013 7:09:48 AM JST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Fri Mar 22 05:12:27 JST 2002,
To: Wed Mar 23 05:12:27 JST 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[7]" is now listening on 0:0:0:0:0:0:0:1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 10.14.126.11:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.14.126.11:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 10.14.34.75:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.14.218.238:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.14.218.238:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 10.14.34.75:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Sep 11, 2013 7:09:48 AM JST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices0" for domain "EPMSystem" running in Production Mode>
<Sep 11, 2013 7:09:48 AM JST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Sep 11, 2013 7:09:48 AM JST> <Warning> <Server> <BEA-002611> <Hostname "SJ015040", maps to multiple IP addresses: 10.14.126.11, 10.14.34.75, 10.14.218.238, 0:0:0:0:0:0:0:1>
<Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
HyS9eas-syserr.log is empty and I dont find anyother details from the other log files.
Kindly help me out in solving this issue.
Thanks in advance.
Regards,
Balaji PHi John,
Sorry for replying late.
I ran the EPM diagnostic and found EAS & APS application are failed. So as you mentioned, i tried re-deployment through EPM configurator.
But Re-configuration fails with error "An unexpected error occurred and the application will have to shut down" .
When i looked in to the Config tool.log,I got the following messages.
[2013-09-17T18:17:04.635+09:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Parsing server FinancialReporting0 on port 8200 from registry
[2013-09-17T18:17:04.827+09:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle.EPMINS] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: Unexpected error:[[
java.lang.NullPointerException
at com.hyperion.hit.tool.deploy.utils.UIPortUtil.<init>(UIPortUtil.java:83)
at com.hyperion.hit.tool.deploy.utils.UIPortUtil.getInstance(UIPortUtil.java:53)
at com.hyperion.config.wizard.DeploymentField.getAppServerDeploymentData(DeploymentField.java:235)
at com.hyperion.config.wizard.DeploymentField.<init>(DeploymentField.java:56)
at com.hyperion.config.wizard.impl.DeploymentForm.<init>(DeploymentForm.java:57)
at com.hyperion.config.wizard.impl.DeploymentState.initializeBeforeShowOnNext(DeploymentState.java:56)
at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:522)
at java.lang.Thread.run(Thread.java:619)
Since it is similare to the Oracle konwledge base article - (Doc ID 1570293.1), I tried adding the shared service domain to the Windows host file. But i am still recieveing the same error message as above.
Appreciates your help.
Thanks & Regards,
Balaji P -
ORA-27142: could not create new process/ when i am duplicating DB
I am trying to duplicated DB on new server and getting this error
Need suggestions to solve this ?
RMAN-03002: failure of Duplicate Db command at 10/03/2006 16:58:58
RMAN-03015: error occurred in stored script Memory Script
ORA-27142: could not create new processcheck the availability of disk space where netbackup writes log files.
if its is all set,
open the netbackup log file and look for any recent relevant messages.
look closely in rmanlogs and netbackup logs for any messages ralating to DBMS_BACKUP_RESTORE.RESTOREBACKUPPIECE -
BEA-141230 Could Not locate descriptor file for System Resource: DS name
Guys,
When I start the Admin and Managed server ..I get below warning message.
*<Warning> <Management> <BEA-141230> <Could Not locate descriptor file for System Resource : datasource1.>*
I know that weblogic server is unable to locatie datasource1.xml file at <SOA_HOME>/user_projects/domains/base_domain/config/jdbc
Is there any way to to get rid off from this error? I tried to delete datasource from weblogic Admin console, but get below error:
java.lang.NullPointerException
All changes have been activated. No restarts are necessary.
Errors were encountered while performing this delete operation.
Thanks,
AbAre you starting servers with the root user? make sure that using whichever user you are starting server, it has full access on MW_Home and it's sub-directories. You may consider raising a support SR.
Regards,
Anuj -
Ora-12154 Could not resolve the connect Identifier specified
I am facing problem for communicating to Microsoft SQL Server through Oracle GateWay.
*1*. In installed Oracle Gateway 11.2 @D:\product\11.2.0\tg
*2. D:\product\11.2.0\tg\dg4msql\admin\initdg4msql.ora* is as:
HS_FDS_CONNECT_INFO=dba.Insignia
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
*3. listener.ora is as (D:\product\11.2.0\tg\NETWORK\ADMIN\tnsnames.ora)*
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dba)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = D:\product\11.2.0\tg
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = dg4dmssqldb)
(PROGRAM = D:\product\11.2.0\tg\bin\dg4msql)
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER=OFF
*4. tnsnames.ora is as (D:\product\11.2.0\tg\NETWORK\ADMIN\listener.ora)*
PROD=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.230)(PORT=1521))
(CONNECT_DATA=(SID=PROD))
msql1=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=TCP)(HOST=dba)(PORT=1521))
(CONNECT_DATA=
(SID=dg4dmssqldb) )
(HS=OK)
*5. Oracle Database Link (its working well)*
create database link apps connect to dba identified by dba using 'prod';
*6. Microsoft Sql server Database Link*
create database link msql1 connect to "sa" identified by "angal" using 'msql1' ;
When i try to select data through microsoft sql server database link its show following error;
Ora-12154 Could not resolve the connect Identifier specified
Wher i wrong......Hello,
I have not used Oracle Gateway for a long time, but did you try to rename the file D:\product\11.2.0\tg\dg4msql\admin\initdg4msql.ora into D:\product\11.2.0\tg\dg4msql\admin\initdg4dmssqldb.ora ?
initdg4msql.ora is the default name, and should be changed if you do not use dg4msql as gateway SID:
http://download.oracle.com/docs/cd/E11882_01/gateways.112/e12013/configsql.htm#autoId2
Hope it will help.
Regards,
Sylvie -
Calc Manager displays "Could not connect to dimension server" 11.1.2.1
11.1.2.1 EPMA
Opening Calc Manager and expanding Planning displays this error message:
Could not connect to Dimension Server.
Please make sure that the required services are started.
I logged onto the foundation servers and restarted the following services (in this order):
EPMA_Server
Hys9EPMAWebTier
Calc Manager (on respective servers)
The problem still persists. Any ideas on how to resolve this?
Edited by: Metatron on Sep 17, 2012 7:32 AMAfter restarting the services I started digging in the logs and I found 2 errors in the application log. These errors only occurred on one of the two foundation(dimension) servers (the other server has no errors in the application logs regarding this):
1:
[EPMA Server Startup] FATAL An error occurred during initialization of the Dimension Server Engine: Violation of PRIMARY KEY constraint 'PK_PropMbrArr'. Cannot insert duplicate key in object 'dbo.DS_Property_Member_Array'.
The statement has been terminated..System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'PK_PropMbrArr'. Cannot insert duplicate key in object 'dbo.DS_Property_Member_Array'.
The statement has been terminated.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Hyperion.DataAccessLayerCore.DALCommand.Execute()
at Hyperion.DataAccessLayerCore.BaseWriteCommand`1.Execute(Boolean CanWrite)
at Hyperion.DataAccessLayerCore.InsertCommand`1.Execute(Boolean CanWrite)
at Hyperion.DataAccessLayerCore.BaseWriteCommand`1.Execute(Boolean CanWrite, T instance)
at Hyperion.DataAccessLayerCore.GenericDAO.Insert[T](T instance)
at Hyperion.DimensionServer.DAO.DimensionPropertyManagerDAO.InsertDimensionMemberArrayPropertyItem(PropertyMemberArrayRecord row)
at Hyperion.DimensionServer.PropertyManager.UpdateDimensionMemberArrayProperty(Int32 applicationID, DimensionMember member, MemberArrayProperty property)
at Hyperion.DimensionServer.PropertyManager.UpdateRelationshipArrayProperty(Int32 applicationID, RelationshipMember member, MemberArrayProperty property)
at Hyperion.DimensionServer.RelationshipMember.InternalUpdateArrayProperties(Int32 applicationID, IEnumerable`1 properties)
at Hyperion.DimensionServer.RelationshipMember.UpdateArrayProperties(Int32 applicationID, ICollection`1 memberProperties)
at Hyperion.DimensionServer.DimensionMember.UpdateArrayProperties(Int32 applicationID, ICollection`1 memberProperties)
at Hyperion.DimensionServer.ProductRegistration.UpdateMemberArrayProp(String propertyName, RelationshipMember member, Object target, Application app)
at Hyperion.DimensionServer.ProductRegistration.ParseValidationAssignments(XPathNavigator nav)
at Hyperion.DimensionServer.ProductRegistration.ProcessRegistration()
at Hyperion.DimensionServer.Library.Load()
at Hyperion.DimensionServer.Global.Initialize(ISessionManager sessionMgr, Guid systemSessionID, String sqlConnectionString)
2:
[EPMA Server Startup] ERROR Exception occurred in the DAL. Error Message: 'Violation of PRIMARY KEY constraint 'PK_PropMbrArr'. Cannot insert duplicate key in object 'dbo.DS_Property_Member_Array'.
The statement has been terminated.'. SQL command or stored proc:
INSERT INTO DS_Property_Member_Array (
i_application_id,
i_dimension_id,
i_library_id,
i_member_id,
i_prop_def_dimension_id,
i_prop_def_member_id,
i_ref_dimension_id,
i_ref_member_id,
c_value
VALUES (
@p_ApplicationID,
@p_DimensionID,
@p_LibraryID,
@p_MemberID,
@p_PropDefDimensionID,
@p_PropDefMemberID,
@p_RefDimensionID,
@p_RefMemberID,
@p_Value
Params:
p_ApplicationID = 1, p_DimensionID = 4, p_LibraryID = 1, p_MemberID = 177, p_PropDefDimensionID = 1, p_PropDefMemberID = 72, p_RefDimensionID = 6, p_RefMemberID = 281, p_Value = <null>
System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'PK_PropMbrArr'. Cannot insert duplicate key in object 'dbo.DS_Property_Member_Array'.
The statement has been terminated.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Hyperion.DataAccessLayerCore.DALCommand.Execute()
Maybe you are looking for
-
How do I Transfer Music from My Ipod to my Lap top
I had a Lap Top and My company give a brand new Laptop... i have all my songs in my iPod.... How can I Import all the songs from my iPod to my iTunes?? is not easy, and copy-paste or drag the song from iPod to my library in iTunes aren´t working eith
-
Constant kernel panic in regular boot sequence - HELP!
Hi, I purchased my mac pro in march of 08. By june, my monitor had begun emitting a pink hue over everything. I replaced the monitor only to find that the problem was related to the computer itself, the pink color persisted on the new monitor. So I s
-
Center text in text field - vertically and horizontally
Hi to all, I have a text field with a specific size (for example 10x10 cm) I need this size because all the fields in the report must have this minimum size and they just can grow vertically (expand). But i need to put the text centered in the field,
-
My Ipod classis won't take a charge. it blinks say's "connect to power" blinks again and say's charging. I wont synco to Itunes. Can anyone help me?
-
My list of playlists is getting long, and I foresee a problem when scrolling through them becomes a hassle. Is there any way to create subdirectories or nested playlists? E.g., several directories for types of music, and under each of those several d