ORABPEL-04079 when opening diagram

I am testing E-Business with OTM and BPEL 10.1.2.0.2.
In E-business I launch a process that launch a BPEL process instance. This process finished with error:
<faultstring>javax.ejb.EJBException: Transaction was rolled back: timed out
I go to bpel console and I was able to find one or more launched bpel process instances, but when I try to open it I get a window
Error:Internal/Bug (#351)
Cannot read blob stream from datastore with key "1009"; exception is
I click on Ok and it goes back to the Dashboard. I checked the bpel logfile and I found this error:
<2006-12-27 10:01:49,466> <ERROR> <default.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "instance manager": Cannot read blob stream.
Cannot read blob stream from datastore with key "1009"; exception is .
ORABPEL-04079
Cannot read blob stream.
Cannot read blob stream from datastore with key "1009"; exception is .
at com.collaxa.cube.engine.util.DBUtils.getBLOB(DBUtils.java:277)
at com.collaxa.cube.engine.util.DBUtils.getBLOB(DBUtils.java:224)
at com.collaxa.cube.engine.util.DBUtils.getUncompressedBLOB(DBUtils.java:343)
I think this is similar to bug 5246625 with base bug 5232808. It says it is due to a timeout not handled correctly but it also says this is for 10.1.3 not not below...
So my question is ... Is this a BPEL bug? is it an e-business bug?

Hi,
I am not sure how you got into that state; but you should be able to work around it my creating the missing packages in the navigator. Simply go to New -> Gallery -> General -> UML -> Package. Once in place the diagram should now open.
Thanks,
Gerard

Similar Messages

BME-00600: The UML Package ... could not be resolved - When opening diagram

Hi everybody,
when opening an existing activity diagram we are receiving the error below. The files are present on the filesystem. Other diagrams like database diagram could be opened with no problems.
We are using JDeveloper version 10.1.3.0.3 (Early Access / Win XP).
Any ideas?
Thanks,
Marcus Kresin
Message
BME-00600: The UML Package cargo could not be resolved
Cause
The element may have been moved or deleted from the file system, or the Model path, source path or classpath may be incomplete. This error can also occur when the element was found, but errors in its definition prevented it from being loaded. Examine the error stack for further information on the exact cause.

Hi,
I am not sure how you got into that state; but you should be able to work around it my creating the missing packages in the navigator. Simply go to New -> Gallery -> General -> UML -> Package. Once in place the diagram should now open.
Thanks,
Gerard

ORABPEL-30516 when open tasks content in BPM workspace

I try to open content of tasks in BPM Workspace (http://localhost:7001/bpm/workspace/) and get error:
ORABPEL-30516
Token decryption failed.
Could not extract information from Workflow context token.
Ensure that the Workflow context is not corrupted and it was generated from one of the nodes in the same cluster.
     at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:205)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
     at oracle.bpel.services.workflow.query.ejb.TaskQueryService_oz1ipg_EOImpl_1035_WLStub.getWorkflowContext(Unknown Source)
     at oracle.bpel.services.workflow.query.client.TaskQueryServiceRemoteClient.getWorkflowContext(TaskQueryServiceRemoteClient.java:223)
     at sun.reflect.GeneratedMethodAccessor3350.invoke(Unknown Source)
Caused by: ORABPEL-35011
Unable to Decrypt data.
Unable to Decrypt data.
Check for corrupted encrypted data. Check installation/post-installation steps for errors. Check for errors during SOA server startup.
     at oracle.bpel.services.common.util.EncryptionService.decryptBytes(EncryptionService.java:139)
     at oracle.bpel.services.common.util.EncryptionService.decrypt(EncryptionService.java:111)
     at oracle.bpel.services.workflow.verification.impl.VerificationService.decryptString(VerificationService.java:2588)
     at oracle.bpel.services.workflow.verification.impl.VerificationService.getValuesFromToken(VerificationService.java:2620)
     at oracle.bpel.serv
On another computer this tasks open well! I tried with diffrent browsers (Explorer, Firefox) and also get error? Have you any ideas about this problem?

I know this is an old post, but it sounds like you're trying to use multiple factories to connect to BPM. I experienced a similiar issue when I initialized a handle on a factory in a class constructor. Later, in method within that class, I was using a context obtained via a different factory. This same error was thrown. I hope this makes sense.

Crash when opening Block Diagram

I am converting a Windows .dll based program to an event driven state machine using my Mac (LV2010) as a development computer. The final program will run in the development environment on a Windows computer. When I reach a certain point in the conversion process, the VI will crash LV while trying to open the block diagram. The VI is broken and always has been because of the .dll and possibly because of some bad wires. I tried rebuilding the VI from scratch and the same thing happened again. I can open the diagrams of the subVIs with the CLFN calls. The .dll file is present on the same directory as the VIs.
Clues: 1. I have had this happen when first opening the BD after restarting LV. Maybe this means I need to work all night and finish everything before shutting down LV??
2. I started with an example VI and was modifying it to include the state machine. Maybe I should build a state machine VI and then add in the camera-specific parts later.
I am attaching a zip file with the VI "testNewCamera.3.vi" and various subVIs, typedefed controls and the .dll. I am also attaching the crash log file.
This has now cost me too many man-hours so I am looking for suggestions.
I am going to save several interim versions the next time I restart this process.
Thanks,
Lynn
Attachments:
OpenBDcrash.zip ‏384 KB
lvmaccrashlog2010-11-10-10-44-33.txt ‏34 KB

Hi,
The first thing I try to do when I get a VI (FP or BD) corruption/ issue when opening / crash / whatever...is to mass compile all the VIs I have. Sometimes it works, sometimes not.
I was able to open the BD of TestNewCamera3.vi but I am missing a lot of IMAQ VIs and LabVIEW is telling me that a DLL is missing (maybe it is what is causing the crash in your case).
I join the files saved on my computer, maybe you could use it.
Regards,
Da Helmut
Attachments:
Dossier testNewCamera.3.zip ‏48 KB

Labview crashes when opening a file

I have a simple vi whos purpose is to build a set of custom labview applications. At some points the .vi gets corrupted (with no ryme or reason). After the vi get corrupted it will no longer open in labview and the following error shows up in the windows event viewer. Note that any other vi will open ok after this happens. Any ideas on what is happening with the .vi in question?
LabVIEW information: Error: 404 "Not Found" for "national instruments/labview/ni example finder/1.0/niexamplefinderserver", file "c:/program files (x86)/national instruments/shared/ni webserver/www/national instruments/labview/ni example finder/1.0/niexamplefinderserver": Can't access URL .
Solved!
Go to Solution.
Attachments:
BuildCreator.vi ‏16 KB
CreateLogFile.vi ‏11 KB

Very simple. It is doing what you told it to do.
The BuildCreator.vi is set to Run when Opened. When it runs, the last thing it does is to Quit LabVIEW.
So what can you do about this? Open a new VI. Place Build Creator.vi on the block diagram like a subVI. Then open that subVI. It will open in edit mode.
Lynn

Java Error When opening ER Model in Jdev 11g release 2

Dear All,
I m getting below error when opening my ER model in jDev
java.lang.IllegalArgumentException: Ref is null
     at oracle.modeler.dif.ModelerGraphicBridge.findBridgeFromRef(ModelerGraphicBridge.java:343)
     at oracle.modeler.dif.ModelerGraphicBridge.createEdgeGraphic(ModelerGraphicBridge.java:267)
     at oracle.modeler.dif.ModelerGraphicBridge.createEdgeGraphic(ModelerGraphicBridge.java:86)
     at oracle.diagram.dif.GraphEdge.createGraphic(GraphEdge.java:152)
     at oracle.diagram.dif.GraphElement.createContainedGraphics(GraphElement.java:213)
     at oracle.modeler.shape.config.DefaultDiagramGraphicBridge.createDiagramGraphic(DefaultDiagramGraphicBridge.java:122)
     at oracle.modeler.dif.ModelerGraphicBridge.createDiagramGraphic(ModelerGraphicBridge.java:250)
     at oracle.modeler.dif.ModelerGraphicBridge.createDiagramGraphic(ModelerGraphicBridge.java:86)
     at oracle.diagram.dif.Diagram.createGraphic(Diagram.java:152)
     at oracle.diagram.dif.Diagram.createGraphic(Diagram.java:141)
     at oracle.modeler.dif.ModelerGraphicBridge.getGrapher(ModelerGraphicBridge.java:426)
     at oracle.modeler.dif.ModelerGraphicBridge.getGrapher(ModelerGraphicBridge.java:367)
     at oracle.modeler.addin.ModelerNode.findOrCreateManager(ModelerNode.java:252)
     at oracle.modeler.addin.ModelerDiagram.findOrCreateGraphSystemFromContext(ModelerDiagram.java:358)
     at oracle.diagram.framework.editor.CommonDiagram.open(CommonDiagram.java:231)
     at oracle.modeler.addin.ModelerDiagram.open(ModelerDiagram.java:111)
     at oracle.diagram.framework.editor.IdeDiagramEditor.openDiagram(IdeDiagramEditor.java:323)
     at oracle.diagram.framework.editor.IdeDiagramEditor.openImpl(IdeDiagramEditor.java:273)
     at oracle.modeler.addin.ModelerEditor.openImpl(ModelerEditor.java:79)
     at oracle.ide.editor.AsynchronousEditor.contextAvailable(AsynchronousEditor.java:427)
     at oracle.ide.editor.AsynchronousEditor.updateContextImpl(AsynchronousEditor.java:411)
     at oracle.ide.editor.AsynchronousEditor.setDelayedContext(AsynchronousEditor.java:395)
     at oracle.ide.editor.AsynchronousEditor$3$1.run(AsynchronousEditor.java:362)
     at oracle.bali.ewt.util.PaintUtils.invokeAfterRepaint(PaintUtils.java:53)
     at oracle.javatools.util.SwingUtils.invokeAfterRepaint(SwingUtils.java:607)
     at oracle.ide.editor.AsynchronousEditor$7.run(AsynchronousEditor.java:563)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
     at java.awt.EventQueue.access$000(EventQueue.java:85)
     at java.awt.EventQueue$1.run(EventQueue.java:603)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
     at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
     at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Thanks

User,
As you did not give any other information other then the stack trace it's heard to help. Does this error show a dialog box which asks you if want to save your work and exit or save and continue?
Where was the ER diagram created?
Timo
Edited by: Timo Hahn on 20.05.2012 17:10

How to stop the executable from starting when opened

Hi Guys,
I am building an exe with the application builder. I am not able to find a way to stop the exe from running when opened. I dont need the exe to run. I know I m missing a very basic step here but I m not able to do that.
Could anyone explain me how to do this.
Regards,
Nitin

Hello,
This is Dominic L. from Applications Engineering at National Instruments. This was reported to R&D (CAR#41DAPUQU) and was fixed in LabVIEW 8.2.1. Here is a link to the current evaluation software download for LabVIEW:
http://digital.ni.com/demo.nsf/websearch/14f9ce475127ade786256ac60070926c?opendocument
This particular bug actually renders all the build options for source file settings unusable. While the other options can be set manually in the source VI properties, the start-up VI will always run when an executable is opened.
Here are three different workarounds to this:
Option 1 - Upgrade to 8.2.1.
Option 2 - Check "Enable debugging" and "Wait for debugger on launch" in the Advanced page of the build specification. One side effect is this will include the block diagrams of the VIs and extra code for debug tool support. Note that if you don't protect the source code (block diagram), it kind of defeats the purpose of creating an executable.
Option 3 - Use a dummy startup VI to launch the desired startup VI.
For the third workaround, the attached "Dummy Startup VI.vi" uses VI server to open the desired startup VI's front panel and then closes. To use the Dummy Startup VI follow these steps:
Add the Dummy Startup VI to the project.
Open the Dummy Startup VI and change "Main VI.vi" to the VI you would like to open but not run in the project and save.
In the source files page of the build, select the Dummy Startup VI as a startup VI and the VI you would like to open but not run as a support VI.
Build and run.
I hope this helps.
Have a great evening!
Best Regards,
Dominic L.
Attachments:
Dummy Startup VI.vi ‏12 KB

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Pages 5.5.1: When opening a document created with Pages '09 (Version 4.0) with Pages 5.5.1 the page header and the page footer are deleted. How can this be prevented? Or is this a bug in Pages 5.5.1?

Same problem here (no graphics in header or footer) and the problem has been reported months ago. It is another bug/feature lost when Apple moves from 09 to the iCloud-compatible versions. Complain to Apple, you may have better chance than me and they may finally listen to their users....

Save As Dialog Not Showing when opening pdf from Outlook 2010

Hi
I have recently had to change the default documents folder on a windows 7 machine (Right Click Documents, properties, include folder, set save location). Since this change, when opening an attached pdf document in outlook 2010 and viewing with adobe reader, if i click Save as from the file menu, no os dialog appears and therefore user cannot choose a place to save the document.
As a work around the user can right click the attachment save the docment to a location, once opened, ther save as dialog is usable.
I have uninstalled and re-installed reader to the laterst version, but with no luck.
Any ideas?
Jason Congerton

This looks like a new behavior of Outlook 2010 and isn't specific to PDFs. You will need to "save as" the document. There is a thread at Microsoft forums about this with some possible workarounds:
http://social.technet.microsoft.com/Forums/en-US/outlook/thread/927d678d-b55b-4732-93cb-f1 3ed1dacf96/

Error When Opening Any Form

Hi All.,
Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
Application:11.5.10.2
OS-----------HP-UX
DB-----------10.2.0.4.0
File Name:
oracle/forms/ui/FLWTextArea
Work Around
Relink the all the files
Regenerated the jar files
Regenerated the forms
f60gen help=y
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Metalink Doc id
java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

Thanks,
From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
Here is an example:
If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
Enter value for bug_number: 9935935
old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
new 1: select bug_number from ad_bugs where bug_number='9935935'
no rows selected
SQL>

Content of illustrator file is different when opening in and old cs version.

Hi all!
I have a very awful and urgent problem in my job right now, i design some advertisings that goes regularly from month to month, so some advertisings are just like the last month used but with some data changed.
My problem:
I have an illustrator file (.ai) saved and created in CS3 with pdf compability, outlines, and files linked and included on the same cd,
but when opening the same .ai file in another machine but with CS2 (the client's PC).. it shows a very old version of the file with ALL linked files embebbed (and those are different that are on the cd!!)., in the CS3 file i saved and recorded on cd i replaced all things of course and re-save it. I don't know what is wrong, but when i open it in another machine (i.e. a Mac) it shows the correct version of advertising. But not with the client's machine...
In my illustrator file, there is only text outlines and 2 psd. Each PSD have only 1 layer, 'cause they were flattened (thet are actually letters scanned).
So basically: My .ai file, created in CS3 in a Mac, seems totally different and embebbed when opening in CS2 in a PC.
I hope someone can help me with this urgent matter Thanks a lot everyone!!

In regards to the illustrator file link not matching, there is nothing wrong with the .ai file., your problem is with the filenames on the linked images. Your linked images have the SAME EXACT FILENAME AS THE OLD ones connected to the clients machine. You need to break the link to the old bad files and re-establish them to your good files.
Use links palete Flyout menu >> link information to find the location of the images. Change the name of an enclosing folder, or some other method to break the link to old images. Relink to new images, by placing them next to the .ai file in the same folder, and open the .ai file.

I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image,

I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image, the guidelines are not locked, it is annoying to have to lock them down again. and it would actually be nice, to ba able to give specific directions when placing the guidelines. Thanks

Then why are the guides unlocked when I reopen a document that I saved with the guides locked ?
Thanks.

On my macbook pro when opening a page i can not save it as a pdf only give me the option of saving it as a web page can any body help me on this I have tryed so many times without success

on my macbook pro when opening a page on safaryi can not save it as a pdf only give me the option of saving it as a web page can any body help me on this I have tryed so many times without success?

Just select Print in Safari and then, in the bottom left-hand corner, select PDF and you can save it to whichever flavor pdf file you like.
Clinton

Getting Prompt for Credentials When Opening InfoPath 2010 Form in Sharepoint 2010

I have a domain user who runs Office 2010 x32 and uses a Sharepoint 2010 site daily. Lately a specific page on that site has been randomly giving prompts for credentials when opening existing documents and creating new ones. The process can be most easily
replicated by opening the new document template in Infopath by going to Documents -> New in the ribbon bar of the SP page. Most of the time the Windows credentials for the user are passed to Infopath/Sharepoint automatically (which is normal), but on the
fourth or fifth attempt to create a new form, the prompt appears. The user can still enter the credentials and open the blank template form, but a prompt should not appear. The user is also the administrator for that page, so I'm thinking it's not a permissions
issue.
The user is running IE 9 on Windows 7 Pro x64. I have performed the following:
Reset advanced IE settings and all user cache data
Cleared cached Sharepoint credentials in Windows credential manager
Re-applied group policy for the machine using gpupdate /force
Logged in with a clean temporary profile
Logged in to another domain account using the user's Sharepoint credentials
Cleared Infopath cache
Re-installed Office 2010 x32
The problem only occurs only on this particular machine. There are no Sharepoint or authentication-related errors or warnings in the application and system event logs. There are also no error messages on-screen when the prompt appears. I also considered
the possibility of this being a performance related issue in the case that maybe Infopath was taking too long to start, causing the credential pass-through process to time out and fall back to a prompt. I ran disk cleanup, deleted some temporary files, and
checked for excessive CPU/memory load. I didn't find any issues and doing these things did not help.
I'm convinced there is another setting somewhere in Windows that is causing this. Interestingly it always happens after four or five attempts, never the first time. Can someone point me in the right direction?

Hi Titan, this sounds like an IE security setting issue. Things to do:
1. In Internet options>Security>Local Intranet, make sure "Enable Protected Mode" is not selected.
2. Under Sites>Advanced, add https://*.sharepoint.com (and make sure "Require server verification..." is not checked).
3. Under Security>Custom Level, scroll all the way to the bottom and make sure "Automatic logon with current user..." is checked.
cameron rautmann

Firfox runs the update check when opening everytime and doesn't remember previous settings; any reason?

When opening Firefox 5 in W7 enterprise (x64) it checks compatibility for add-ons and extensions, shows the welcome to FF5 screen and the welcome to Foxtab screen. I then find that all of the permissions I set in No-Script are gone. This only happens if I close all the windows but it does happen every time. I've disabled foxtab but it still does the check and new welcome.

Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion. There should be a row of icons at the top of a grey field. if the quarter-moon icon is bright white, tap it. If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.

ORABPEL-04079 when opening diagram

Similar Messages

Maybe you are looking for