Oracle 10g EM is not working properly

Hi all!
I just installed a new database of Oracle 10g (10.1.0.2) and applied patchset (10.1.0.4). After all I started the OEM using emctl start dbconsole, it starts alright and I'm able to login on the database using the SYS as SYSDBA user. When it goes to the main page that should show the status, alerts, etc about the database I receive an error that the database is not started. If I click start, gives me an error:
oracle@xseries:~> emctl start dbconsole
TZ set to Brazil/West
Oracle Enterprise Manager 10g Database Control Release 10.1.0.4
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://xseries.avconline.com.br:5505/em/console/aboutApplication
Agent Version : 10.1.0.4.0
OMS Version : 10.1.0.4.0
Protocol Version : 10.1.0.2.0
Agent Home : /opt/oracle/product/10.1.0/xseries.avconline.com.br_nlprod
Agent binaries : /opt/oracle/product/10.1.0
Agent Process ID : 15398
Parent Process ID : 15393
Agent URL : http://xseries.avconline.com.br:5505/emd/main
Started at : 2005-04-16 10:52:49
Started by user : oracle
Last Reload : 2005-04-16 10:52:49
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 15
Size of XML files pending upload(MB) : 4.48
Available disk space on upload filesystem : 51.94%
Agent is already started. Will restart the agent
Stopping agent ... stopped.
Starting Oracle Enterprise Manager 10g Database Control ....... started.
Logs are generated in directory /opt/oracle/product/10.1.0/xseries.avconline.com.br_nlprod/sysman/log
But the entreprise manager shows the screen to give the credentials to connect on the database. But when I put the user/pass for the OS System and Database I receive the following message:
Premature EOF encountered, no trailer found
And also I have found that in a few minutes the service of dbconsole shuts down by itself, and I have to do emctl start dbconsole again.
Does anyone knows what is going on ?
Thanks!
Eduardo

try the below
emca -config dbcontrol db -repos recreate

Similar Messages

Oracle 10g database homepage not working?

Oracle 10g database homepage not working?
Hi just i installed oracle database 10g express edition but after the restart the oracle database homepage wont open http://127.0.0.1:8080/apex that link always telling cannot display...
here i have posted lsnrctl status
pls help
thanks in advance
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY…
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-SEP-2010 17:52:11
Uptime 0 days 1 hr. 28 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\se…
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\se…
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIP…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOS…
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully

I had a problem of accessing Oracle 10g database homepage. After a couple of days of research and discussions with coworker we found a solution.
Here is the solution:
1. Find out your default browser.
2. Configure your default web browser to connect to the Oracle Database XE Database Home Page as stated
here:
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHHJEHF
If this does not help de-install Oracle XE and reinstall following the instruction. During re-installation find out your default browser and configure it as instructed.
I suspect when the default web browser changes the Oracle 10g XE Database Home Page stops working.
Good luck

Oracle virtula box machine not working properly

Hi All,
I have installed oracle virtual machine with Redhat 6 OS. My host machine is also on Redhat 6 OS.
The issue I am facing is when I am connecting to virtual machine through Team viewer connection , any special characters are not working i.e /,*," etc. All the alphabets keys are working properly.
I am only facing the issue when I am connecting through Team viewer , everything works fine when I connects directly to server.
Sometime I have to connect to it through Team Viewer session to work remotely. Can you please help or suggest something.
Thanks,
Virender.

VIRENDER SINGH wrote:
Hi Steven,
Unfortunately I don't have any error message with me even not in team viewer logs. It just simply not type special characters through team viewer.
Thanks,
Virender.Ok, so you are sayng that the team viewer interface doesn't seem to be accepting keyboard input for some/all 'special' characters?
And just to make sure you understand the architecture, that VBox machine is, for all intents and purposes, a remote machine. It has it's own ip address and operates inside its own little world contained within the virtual machine. Do you have any other connectivity type issues with it? Can you start an ssh session on it from your host desktop machine?
BTW, this is a database forum, and I haven't yet seen anything in this thread relating to a database - or even an Oracle product of any kind. Are we really dealing with an issue that would be better addressed on a generic Linux forum?

Oracle 10g RMAN is not working in RHEL 4 after fresh installation

I downloaded Oracle 10g R2 from OTN at home for self study.
I have problem with the RMAN after fresh installation Oracle 10g in RedHat Enterprise Linux AS 4. (x86)
Everything seems works fine, database mounted including EM, SQLPlus, iSQLPlus etc.
But when I attempt to execute RMAN command on the terminal, nothing is happening. No RMAN prompt, No error message!
I ran the "relink all" command but no helps.
Please advice.
Edited by: Surf888 on Nov 16, 2008 9:51 AM

I guess you are a common Linux 'victim', you don't invoke Oracle's rman, but a Linux executable:
http://linux.about.com/cs/linux101/g/rman.htm
Check your PATH variable, you may move $ORACLE_HOME/bin to the top.
Werner

Oracle 10g Agent is not working in Windows VISTA

Hi
I have installed Oracle 10g Grid Control in VISTA. But the Agent is not getting started.
the trc in the Agent10 G log directory is
2008-04-19 17:29:45 Thread-532 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 17:29:45 Thread-532 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:18:22 Thread-5288 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:18:22 Thread-5288 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:18:23 Thread-7652 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:18:24 Thread-7652 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:18:26 Thread-7272 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:18:26 Thread-7272 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:20:52 Thread-4872 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:20:52 Thread-4872 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:20:53 Thread-4344 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:20:54 Thread-4344 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:20:55 Thread-5604 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:20:55 Thread-5604 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1

This pretty much says it all:
No connection could be made because the target machine actively refused it.What version of Vista?
What version of the agent? ... 10g is not a version number it is a marketing label
Did you check to see if the agent is compatible with your operating system?
My recommendation would be to get a real operating system: Either Oracle Linux or XP.

Oracle 11g merge statement not working properly

HI I have recently my oracle version to 11.2.0.3 -64 bit . My merge statement is geeting failied saying that invlid identfier at line number 18
MERGE INTO peer_index indx        USING staging.stg_peer_filing stg          ON (indx.peer_element_code = stg.fund_code                and indx.index_effective_date = trunc(stg.pricing_date))        WHEN MATCHED THEN UPDATE          SET indx.filing_date = trunc(stg.filing_date),            indx.reported_net_assets = stg.net_assets,            indx.active_flag = 'N',            indx.parent_index_code = NULL,            indx.update_datetime = systimestamp,            indx.last_update_user_id = user        WHEN NOT MATCHED THEN INSERT         (index_code, peer_element_code, filing_date, index_effective_date,          reported_net_assets, active_flag          )        VALUES         ((SELECT pe.index_code_prefix || to_char(stg.pricing_date,'MMRR')           FROM fi_benchmark.peer_element pe           WHERE pe.peer_element_code = stg.fund_code),          stg.fund_code, trunc(stg.filing_date), trunc(stg.pricing_date),          stg.net_assets, 'N'         );
please help why this is happening .Same query works fine in 10g .

which line is the line that has the error?
merge INTO peer_index indx
USING staging.stg_peer_filing stg
ON (indx.peer_element_code = stg.fund_code AND indx.index_effective_date = Trunc
(stg.pricing_date))
WHEN matched THEN
UPDATE SET indx.filing_date = Trunc(stg.filing_date),
             indx.reported_net_assets = stg.net_assets,
             indx.active_flag = 'N',
             indx.parent_index_code = NULL,
             indx.update_datetime = systimestamp,
             indx.last_update_user_id = USER
WHEN NOT matched THEN
INSERT (index_code,
          peer_element_code,
          filing_date,
          index_effective_date,
          reported_net_assets,
          active_flag )
VALUES ((SELECT pe.index_code_prefix
                  || To_char(stg.pricing_date, 'MMRR')
           FROM   fi_benchmark.peer_element pe
           WHERE pe.peer_element_code = stg.fund_code),
          stg.fund_code,
          Trunc(stg.filing_date),
          Trunc(stg.pricing_date),
          stg.net_assets,
          'N' );

Oracle 10g install is not working on Global zone

We installed Solaris 10 (below) in a T2000 using the same standards we have for many other hosts.After the installation was finished, three zones were exported from a M5000 class machine and imported into this T2000. From inside the zones we can call the Oracle10g installer and the graphical screen is presented. When executing the installed from the Global zone, we can see a java process running, using 100% of a thread, but no graphical interface is presented at all. Checking truss, we see a lot of pollsys being called. Any ideas?
# uname -a
SunOS wgsst2k01 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T2000
# memconf -v
memconf: V2.6 06-May-2008 http://www.4schmidts.com/unix.html
hostname: wgsst2k01
banner: SPARC Enterprise T2000 (8-core quad-thread UltraSPARC-T1 1000MHz)
manufacturer: Sun Microsystems, Inc.
model: SPARC-Enterprise-T2000
Sun development codename: Ontario
Sun Family Part Number: SEB
Solaris 10 5/08 s10s_u5wos_10 SPARC, 64-bit kernel, SunOS 5.10
1 8-core quad-thread UltraSPARC-T1 1000MHz cpu, system freq: 200MHz
socket MB/CMP0/CH0/R0/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH0/R0/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH1/R0/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH1/R0/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH2/R0/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH2/R0/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH3/R0/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH3/R0/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH0/R1/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH0/R1/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH1/R1/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH1/R1/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH2/R1/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH2/R1/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH3/R1/D0 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
socket MB/CMP0/CH3/R1/D1 has a 1024MB (1GB) DIMM (address 0x000800000-0x4007fffff)
empty sockets: None
total memory = 16384MB (16GB)Cheers
Andreas

This pretty much says it all:
No connection could be made because the target machine actively refused it.What version of Vista?
What version of the agent? ... 10g is not a version number it is a marketing label
Did you check to see if the agent is compatible with your operating system?
My recommendation would be to get a real operating system: Either Oracle Linux or XP.

Oracle 10gr2 locally is not working after installing Oracle 11g

hi ,
Does anyone has any idea after installing oracle 11g in system, Oracle 10g locally is not working. I am getting below error.
Forms session <2> failed during startup: no response from runtime process

Generally this is because the software you install last updates the system environment variables with its information, thereby break products that use files with similar names. Specifically, look at PATH and ORACLE_HOME. Likely you will see that entries for your 11g installation will be displayed first. In order to use v10, you would need to change this or use script files to start executibles. For Forms runtime, be sure to properly set default.env to point to the desired PATH

Enterprise manager not working properly.

Hi All,
I am using Oracle 10g R2 on fedora machine my first database name is orcl then i created second database by dbca by the name orcl2 after that my Enterprise manager is not working properly that is i am not able to login to my database through EM.
Then i deleted my listener LISTENER and created two new listeners by name LISTENER and LISTENER on port no 1521,1522 respectively .
when i issue command lsnrctl start listener
and
lsnrctl start listener1
both of my listeners gets started sucessfully.
but when i start EM i get the same problem.
---- please help me to resolve this issue .

hi,
Duplicate forum
listener configuration giving error.
Regards
Jafar

Jms is not working properly in clustered environment

Hi all,
i am using the application server oc4j 10.1.3.1.0 enterprise edition . my application is standalone application(thick client)
we are using the jndi.properties as follows ...
java.naming.factory.initial=com.evermind.server.rmi.RMIInitialContextFactory
java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security,opmn:ormi://172.16.1.38:6006:deceval_group/Security
java.naming.security.principal=oc4juser
java.naming.security.credentials=oc4juser
oracle.j2ee.rmi.loadBalance=lookup
we have two application servers in cluster topology as u can see above we have used one instance from one application server and one from another.
i have seen that for every instance there one jms server. at runtime it is taking one application servers services
say opmn port 6005 but when the application is connecting to the another application server say opmn 6006
here jms is not working properly when i send message
As we have clustered environment message must be propagated all the applications who use above jndi.properties.
if i keep use only one application server opmn say
java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security
then its is working excellently
please can u provide any solution ASAP
thanks in advance
Manu

Dear Aravindth
(.*?) means -> Select all contents from where you start and end,
For Ex. <month>(.*?)</month> then Select for start <month> and end last </month> tag.
(?) Match zero or one occurrences. Equivalent to {0,1}.
(*) Match zero or more occurrences. Equivalent to {0,}.
(+) Match one or more occurrences. Equivalent to {1,}.
(.) (Dot). Match any character except newline or another Unicode line terminator.
(.*?) means -> Zero or more times Match any character except newline or another Unicode line terminator + Match zero or more occurrences. Equivalent to {0,}.+Match zero or one occurrences. Equivalent to {0,1}.
Could you please refere the below cite :
http://www.javascriptkit.com/jsref/regexp.shtml
Thanks & Regards
T.R.Harihara SudhaN

CTSS is not working properly in RAC 11.2.0.1 on vmware 1 (redhat 5.3)

Dears
I have installed CRS 11.2.0.1 on vmware 1 at redhat 5.3 .
CRS has installed sucessfully without any error. but when execute
[oracle@RAC1 grid]$ ./runcluvfy.sh stage -post crsinst -n RAC1,RAC2 -verbose
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name                             Status
RAC2                                  passed
RAC1                                  passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name                             State
RAC2                                  Active
RAC1                                  Active
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Reference Time Offset Limit: 1000.0 msecs
Check: Reference Time Offset
Node Name     Time Offset               Status
RAC2          -4700.0                   failed
RAC1          0.0                       passed
Result: PRVF-9661 : Time offset is NOT within the specified limits on the following nodes:
"[RAC2]"
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@RAC1 grid]$ After That I checked on RAC1
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
and on RAC2
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -4700
[oracle@RAC2 ~]$ But when some time ago i checked it was
oracle@RAC1 ~]$
[oracle@RAC1 ~]$ cluvfy comp clocksync -n all
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
CTSS resource check passed
Querying CTSS for time offset on all nodes...
Query of CTSS for time offset passed
Check CTSS state started...
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Check of clock time offsets passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
and on RAC2 is was
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -1000
[oracle@RAC2 ~]$ So, I am seeing that in RAC2, CTSS is not working properly . I don't know why it's time Offset is increasing ?
Thanks&Regards
Muhammad Abdul Halim
http://halimdba.blogspot.com

Dears
I have installed CRS 11.2.0.1 on vmware 1 at redhat 5.3 .
CRS has installed sucessfully without any error. but when execute
[oracle@RAC1 grid]$ ./runcluvfy.sh stage -post crsinst -n RAC1,RAC2 -verbose
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name                             Status
RAC2                                  passed
RAC1                                  passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name                             State
RAC2                                  Active
RAC1                                  Active
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Reference Time Offset Limit: 1000.0 msecs
Check: Reference Time Offset
Node Name     Time Offset               Status
RAC2          -4700.0                   failed
RAC1          0.0                       passed
Result: PRVF-9661 : Time offset is NOT within the specified limits on the following nodes:
"[RAC2]"
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@RAC1 grid]$ After That I checked on RAC1
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
and on RAC2
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -4700
[oracle@RAC2 ~]$ But when some time ago i checked it was
oracle@RAC1 ~]$
[oracle@RAC1 ~]$ cluvfy comp clocksync -n all
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
CTSS resource check passed
Querying CTSS for time offset on all nodes...
Query of CTSS for time offset passed
Check CTSS state started...
CTSS is in Active state. Proceeding with check of clock time offsets on all nodes...
Check of clock time offsets passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): 0
[oracle@RAC1 ~]$
[oracle@RAC1 ~]$
and on RAC2 is was
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -800
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -900
[oracle@RAC2 ~]$
[oracle@RAC2 ~]$ crsctl check ctss
CRS-4701: The Cluster Time Synchronization Service is in Active mode.
CRS-4702: Offset (in msec): -1000
[oracle@RAC2 ~]$ So, I am seeing that in RAC2, CTSS is not working properly . I don't know why it's time Offset is increasing ?
Thanks&Regards
Muhammad Abdul Halim
http://halimdba.blogspot.com

Pick List Value Not Working Properly

Hi Oracle Framework Gurus,
I have a strange Issue in which one of my cusom page is working properly in Jdev and not working Properly when deployed in the apps instance.
There are two custom pages with the same VO.
What I do is have a picklist from one of the custom page and depending on the value of the picklist and I navigate to the other custom page.
This is working properly in the JDev,But for some reasons it works properly in apps instance, when I try to run the first time(ie) when I run page A and pick 'X' from the picklist the Page 'B' is coming properly as per the controller code and when i pick 'Y' from the picklist in Page B, it is navigating to Page A as per the controller code.
This works fine for the first time,But when i again select 'X' from the picklist the proper value from the Picklist is not getting selected and passed to the custom package and so I get wrong values in Page 'B'
What could be the reason for it as it working fine in Jdev,I can navigate from Page A to Page B and Page B to Page A as many times possible.

Hi Anand,
Controller1 :
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
//int intPersonId = pageContext.getEmployeeId();
int intPersonId; // = pageContext.getEmployeeId();
String strPersonId = Integer.toString(277671);
//String strPersonId = Integer.toString(intPersonId);
java.util.Date sysdate = pageContext.getCurrentUserDate();
String convSysDate = pageContext.getOANLSServices().dateToString(sysdate);
// Date testdate = (Date)sysdate.dateValue();
// get the Application Module
OAApplicationModule oaAM = pageContext.getApplicationModule(webBean);
Serializable parameters[] = { strPersonId,convSysDate };
Serializable param[] = { strPersonId };
System.out.println("The Sysdate PF "+convSysDate);
//pass parameters to Application Module
oaAM.invokeMethod("insertLovRow", param);
if ((String)pageContext.getSessionValue("PFlag1") != null)
String PFlag1 =(String)pageContext.getSessionValue("PFlag1");
String SDate1 =(String)pageContext.getSessionValue("SDateSession1");
Serializable param1[] = { SDate1 };
oaAM.invokeMethod("insertLovRow", param);
oaAM.invokeMethod("initEmpLovQuery1",param1);
oaAM.invokeMethod("initEmpTransLovQuery1");
OAMessageChoiceBean orgMesgChoiceBean = (OAMessageChoiceBean)webBean.findChildRecursive("Year");
orgMesgChoiceBean.setPickListViewObjectDefinitionName("EmployeeTest.oracle.apps.per.server.EmpTransDateLov");
orgMesgChoiceBean.setListValueAttribute("StartDate");
orgMesgChoiceBean.setListDisplayAttribute("DateRange" );
orgMesgChoiceBean.setPickListCacheEnabled(false);
else
oaAM.invokeMethod("insertRow", parameters);
oaAM.invokeMethod("initQuery", param);
oaAM.invokeMethod("execQuery");
oaAM.invokeMethod("totexecQuery");
OAMessageChoiceBean orgMesgChoiceBean = (OAMessageChoiceBean)webBean.findChildRecursive("Year");
orgMesgChoiceBean.setPickListViewObjectDefinitionName("EmployeeTest.oracle.apps.per.server.EmployeeDateLovVO");
orgMesgChoiceBean.setListValueAttribute("StartDate");
orgMesgChoiceBean.setListDisplayAttribute("DateRange" );
orgMesgChoiceBean.setPickListCacheEnabled(false);
oaAM.invokeMethod("initEmpLovQuery");
OAViewObject oaviewobject1 =(OAViewObject)oaAM.findViewObject("EmployeeUtilVO1");
oaviewobject1.reset();
if (oaviewobject1 != null)
do
if(!oaviewobject1.hasNext())
break;
oaviewobject1.next();
OARow row = (OARow)oaviewobject1.getCurrentRow();
String fullName = (String)row.getAttribute("EmpDep");
System.out.println("The Name is "+fullName);
} while(true);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
//int intPersonId = pageContext.getEmployeeId();
//String strPersonId = Integer.toString(intPersonId);
int intPersonId; // = pageContext.getEmployeeId();
String strPersonId = Integer.toString(277671);
OAApplicationModule oaAM = pageContext.getApplicationModule(webBean);
if (pageContext.getParameter("ViewDetails") != null)
pageContext.putSessionValue("strPersonId", strPersonId);
pageContext.setForwardURL("OA.jsp?page=/EmployeeTest/oracle/apps/per/webui/EmployeePanelIB",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES, // Show breadcrumbs
OAWebBeanConstants.IGNORE_MESSAGES);
System.out.println("strPersonId "+strPersonId);
String strEvent= pageContext.getParameter(EVENT_PARAM) ;
if ( strEvent.equals("update"))
OAMessageChoiceBean DepStatus1 = (OAMessageChoiceBean) webBean.findIndexedChildRecursive("Year");
String sDate = DepStatus1.getSelectionValue(pageContext);
//String sDate = DepStatus1.getValue(pageContext).toString();
//Serializable parameters[] = { strPersonId,sDate };
Serializable parameters[] = { strPersonId,sDate };
Serializable param[] = { strPersonId };
System.out.println("The PersonId "+strPersonId);
System.out.println("The Controller Date passed is IBUtil "+sDate);
oaAM.invokeMethod("insertRow", parameters);
oaAM.invokeMethod("initQuery", param);
oaAM.invokeMethod("execQuery");
String flag = "1";
//pageContext.putSessionValue("strPersonId", strPersonId);
pageContext.putSessionValue("PFlag", flag);
pageContext.putSessionValue("SDateSession", sDate);
pageContext.setForwardURL("OA.jsp?page=/EmployeeTest/oracle/apps/per/webui/EmpTestPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES, // Show breadcrumbs
OAWebBeanConstants.IGNORE_MESSAGES);
Controller 2:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
//int intPersonId = pageContext.getEmployeeId();
int intPersonId; // = pageContext.getEmployeeId();
String strPersonId = Integer.toString(277671);
//String strPersonId = Integer.toString(intPersonId);
java.util.Date sysdate = pageContext.getCurrentUserDate();
String convSysDate = pageContext.getOANLSServices().dateToString(sysdate);
// get the Application Module
OAApplicationModule oaAM = pageContext.getApplicationModule(webBean);
Serializable parameters[] = { strPersonId,convSysDate };
Serializable param[] = { strPersonId };
System.out.println("The Sysdate PF "+convSysDate);
//pass parameters to Application Module
oaAM.invokeMethod("insertLovRow", param);
if ((String)pageContext.getSessionValue("PFlag") != null)
String PFlag1 =(String)pageContext.getSessionValue("PFlag");
String SDate1 =(String)pageContext.getSessionValue("SDateSession");
Serializable param2[] = { strPersonId, SDate1 };
Serializable param1[] = { SDate1 };
oaAM.invokeMethod("insertLovRow", param);
oaAM.invokeMethod("initEmpLovQuery1",param1);
oaAM.invokeMethod("initEmpTransLovQuery1");
OAMessageChoiceBean orgMesgChoiceBean = (OAMessageChoiceBean)webBean.findChildRecursive("Year");
orgMesgChoiceBean.setPickListViewObjectDefinitionName("EmployeeTest.oracle.apps.per.server.EmpTransDateLov");
orgMesgChoiceBean.setListValueAttribute("StartDate");
orgMesgChoiceBean.setListDisplayAttribute("DateRange" );
orgMesgChoiceBean.setPickListCacheEnabled(false);
else
oaAM.invokeMethod("insertRow", parameters);
oaAM.invokeMethod("initQuery", param);
oaAM.invokeMethod("execQuery");
oaAM.invokeMethod("totexecQuery");
OAMessageChoiceBean orgMesgChoiceBean = (OAMessageChoiceBean)webBean.findChildRecursive("Year");
orgMesgChoiceBean.setPickListViewObjectDefinitionName("EmployeeTest.oracle.apps.per.server.EmployeeDateLovVO");
orgMesgChoiceBean.setListValueAttribute("StartDate");
orgMesgChoiceBean.setListDisplayAttribute("DateRange" );
orgMesgChoiceBean.setPickListCacheEnabled(false);
oaAM.invokeMethod("initEmpLovQuery");
OAViewObject oaviewobject1 =(OAViewObject)oaAM.findViewObject("EmployeeUtilVO1");
oaviewobject1.reset();
if (oaviewobject1 != null)
do
if(!oaviewobject1.hasNext())
break;
oaviewobject1.next();
OARow row = (OARow)oaviewobject1.getCurrentRow();
String fullName = (String)row.getAttribute("EmpDep");
System.out.println("The Name is "+fullName);
} while(true);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule oaAM = pageContext.getApplicationModule(webBean);
//int intPersonId = pageContext.getEmployeeId();
//String strPersonId = Integer.toString(intPersonId);
int intPersonId; // = pageContext.getEmployeeId();
String strPersonId = Integer.toString(277671);
if (pageContext.getParameter("ViewDetails") != null)
pageContext.setForwardURL("OA.jsp?page=/EmployeeTest/oracle/apps/per/webui/EmpPanelPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES, // Show breadcrumbs
OAWebBeanConstants.IGNORE_MESSAGES);
pageContext.putSessionValue("strPersonId", strPersonId);
String strEvent= pageContext.getParameter(EVENT_PARAM) ;
if ( strEvent.equals("update"))
OAMessageChoiceBean DepStatus1 = (OAMessageChoiceBean) webBean.findIndexedChildRecursive("Year");
String sDate = DepStatus1.getSelectionValue(pageContext);
//String sDate = DepStatus1.getValue(pageContext).toString();
Serializable parameters[] = { strPersonId,sDate };
Serializable param[] = { strPersonId };
System.out.println("The Controller Date passed is CBUtil "+sDate);
System.out.println("The PersonId "+strPersonId);
oaAM.invokeMethod("insertRow", parameters);
oaAM.invokeMethod("initQuery", param);
oaAM.invokeMethod("execQuery");
String flag = "2";
//pageContext.putSessionValue("strPersonId", strPersonId);
pageContext.putSessionValue("PFlag1", flag);
pageContext.putSessionValue("SDateSession1", sDate);
pageContext.setForwardURL("OA.jsp?page=/EmployeeTest/oracle/apps/per/webui/EmpIBUtilPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES, // Show breadcrumbs
OAWebBeanConstants.IGNORE_MESSAGES);
Hi Above two are the controller codes forget the rest of the codes,Concentrate on the PFR code, Just want to know what I am doing is correct or not.
First time when I select the Picklist value,the value gets passed as a parameter to the custom package and the page gets displayed properly and vice versa,But I am not able to do the same cycle again for some reasons.
Please get back to me ASAP.
Regards,
Magesh.M.K.
Edited by: user1393742 on Oct 19, 2010 11:58 PM

Oracle XE Western version not working on Windows XP pro

I have noticed that production version of the Oracle XE Western version does not work properly. The beta version created the database properly, the production version does not. I tried to install it on a Windows XP Pro version.
Below is the alert_xe.log
Dump file c:\oracle\xeprod\app\oracle\admin\xe\bdump\alert_xe.log
Thu Mar 30 11:38:32 2006
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:533M/1023M, Ph+PgF:2253M/2461M, VA:1945M/2047M
Thu Mar 30 11:38:32 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 285212672
control_files = C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oracle\xeprod\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 94371840
MMAN started with pid=4, OS id=4092
PSP0 started with pid=3, OS id=4088
PMON started with pid=2, OS id=4084
DBW0 started with pid=5, OS id=2044
LGWR started with pid=6, OS id=1248
CKPT started with pid=7, OS id=200
SMON started with pid=8, OS id=2036
RECO started with pid=9, OS id=2012
CJQ0 started with pid=10, OS id=212
MMON started with pid=11, OS id=1924
Thu Mar 30 11:38:38 2006
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=380
Thu Mar 30 11:38:38 2006
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Thu Mar 30 11:38:42 2006
The input backup piece C:\ORACLE\XEPROD\APP\ORACLE\PRODUCT\10.2.0\SERVER\CONFIG\SEEDDB\EXPRESS.DFB is in compressed format.
Thu Mar 30 11:39:10 2006
Full restore complete of datafile 4 to datafile copy C:\ORACLE\XEPROD\ORADATA\XE\USERS.DBF. Elapsed time: 0:00:26
checkpoint is 193065
Full restore complete of datafile 2 to datafile copy C:\ORACLE\XEPROD\ORADATA\XE\UNDO.DBF. Elapsed time: 0:00:27
checkpoint is 193065
Thu Mar 30 11:39:27 2006
Full restore complete of datafile 3 to datafile copy C:\ORACLE\XEPROD\ORADATA\XE\SYSAUX.DBF. Elapsed time: 0:00:45
checkpoint is 193065
Thu Mar 30 11:39:27 2006
Errors in file c:\oracle\xeprod\app\oracle\admin\xe\udump\xe_ora_488.trc:
ORA-00600: internal error code, arguments: [krbrckhr_fail], [C:\ORACLE\XEPROD\APP\ORACLE\PRODUCT\10.2.0\SERVER\CONFIG\SEEDDB\EXPRESS.DFB], [83], [128], [3], [9427], [], []
Thu Mar 30 11:39:29 2006
Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS
Thu Mar 30 11:39:29 2006
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Thu Mar 30 11:39:29 2006
Errors in file c:\oracle\xeprod\app\oracle\admin\xe\udump\xe_ora_744.trc:
ORA-01565: error in identifying file 'C:\oracle\xeprod\oradata\XE\system.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-1503 signalled during: Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS...
Shutting down instance: further logons disabled
Thu Mar 30 11:39:29 2006
Stopping background process CJQ0
Thu Mar 30 11:39:29 2006
Stopping background process MMNL
Thu Mar 30 11:39:29 2006
Stopping background process MMON
Thu Mar 30 11:39:30 2006
Shutting down instance (immediate)
License high water mark = 1
Thu Mar 30 11:39:30 2006
Stopping Job queue slave processes
Thu Mar 30 11:39:30 2006
Job queue slave processes stopped
Waiting for dispatcher 'D000' to shutdown
All dispatchers and shared servers shutdown
Thu Mar 30 11:39:32 2006
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thu Mar 30 11:39:34 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 285212672
control_files = C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oracle\xeprod\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
audit_file_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 94371840
PMON started with pid=2, OS id=756
PSP0 started with pid=3, OS id=796
MMAN started with pid=4, OS id=836
DBW0 started with pid=5, OS id=928
LGWR started with pid=6, OS id=152
CKPT started with pid=7, OS id=924
SMON started with pid=8, OS id=932
RECO started with pid=9, OS id=1212
MMON started with pid=10, OS id=1272
MMNL started with pid=11, OS id=1296
Thu Mar 30 11:39:35 2006
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Thu Mar 30 11:39:35 2006
Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS
Thu Mar 30 11:39:35 2006
WARNING: Default Temporary Tablespace not specified in CREATE DATABASE command
Default Temporary Tablespace will be necessary for a locally managed database in future release
Thu Mar 30 11:39:35 2006
Errors in file c:\oracle\xeprod\app\oracle\admin\xe\udump\xe_ora_1144.trc:
ORA-01565: error in identifying file 'C:\oracle\xeprod\oradata\XE\system.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-1503 signalled during: Create controlfile reuse set database "XE"
MAXINSTANCES 8
MAXLOGHISTORY 1
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
Datafile
'C:\oracle\xeprod\oradata\XE\system.dbf',
'C:\oracle\xeprod\oradata\XE\undo.dbf',
'C:\oracle\xeprod\oradata\XE\sysaux.dbf',
'C:\oracle\xeprod\oradata\XE\users.dbf'
LOGFILE
GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K,
RESETLOGS...
Thu Mar 30 11:39:35 2006
Stopping background process MMNL
Thu Mar 30 11:39:36 2006
Stopping background process MMON
Starting background process MMON
Starting background process MMNL
MMON started with pid=10, OS id=580
MMNL started with pid=11, OS id=1288
Thu Mar 30 11:39:36 2006
ALTER SYSTEM enable restricted session;
Thu Mar 30 11:39:36 2006
alter database "XE" open resetlogs
ORA-1507 signalled during: alter database "XE" open resetlogs...
Thu Mar 30 11:39:36 2006
alter database drop logfile group 3
ORA-1507 signalled during: alter database drop logfile group 3...
Thu Mar 30 11:39:36 2006
ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oracle\xeprod\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
ORA-1109 signalled during: ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oracle\xeprod\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED...
Thu Mar 30 11:39:36 2006
ALTER SYSTEM disable restricted session;
Shutting down instance: further logons disabled
Thu Mar 30 11:39:37 2006
Stopping background process MMNL
Thu Mar 30 11:39:38 2006
Stopping background process MMON
Thu Mar 30 11:39:38 2006
Shutting down instance (immediate)
License high water mark = 1
Waiting for dispatcher 'D000' to shutdown
Waiting for shared server 'S000' to die
Waiting for shared server 'S002' to die
Waiting for shared server 'S003' to die
All dispatchers and shared servers shutdown
Thu Mar 30 11:39:39 2006
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thu Mar 30 11:39:42 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
spfile = C:\ORACLE\XEPROD\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
sga_target = 285212672
control_files = C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF
compatible = 10.2.0.1.0
db_recovery_file_dest = C:\oracle\xeprod\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
audit_file_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\UDUMP
core_dump_dest = C:\ORACLE\XEPROD\APP\ORACLE\ADMIN\XE\CDUMP
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 94371840
PMON started with pid=2, OS id=1480
PSP0 started with pid=3, OS id=1484
MMAN started with pid=4, OS id=1488
DBW0 started with pid=5, OS id=576
LGWR started with pid=6, OS id=1492
CKPT started with pid=7, OS id=1496
SMON started with pid=8, OS id=1260
RECO started with pid=9, OS id=376
CJQ0 started with pid=10, OS id=824
MMON started with pid=11, OS id=244
MMNL started with pid=12, OS id=1636
Thu Mar 30 11:39:42 2006
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Thu Mar 30 11:39:42 2006
ALTER DATABASE MOUNT
Thu Mar 30 11:39:42 2006
ORA-00202: control file: 'C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Thu Mar 30 11:39:42 2006
ORA-205 signalled during: ALTER DATABASE MOUNT...
Thu Mar 30 11:41:54 2006
alter database mount
Thu Mar 30 11:41:54 2006
ORA-00202: control file: 'C:\ORACLE\XEPROD\ORADATA\XE\CONTROL.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-205 signalled during: alter database mount
Thanks,
Lucian

I think the relevant error from the log file is as follows
ORA-01565: error in identifying file 'C:\oracle\xeprod\oradata\XE\system.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-1503 signalled during: Create controlfile reuse set database "XE
There are a couple of things to consider here
Why is this install going into c:\oracle\xeprod ? If should be going into C:\oraclexe. Did you do something to change the default install infrastructure ?
Secondly - sometimes we see this unable to open file error message if some other process is reading the file at the same time as the installer is trying to install it. Anti virus software and Google desktop have been culprits to date.

HT1338 i think my java is not working properly what do i do

i think my java is not working properly what do i do

Java 7 updated for 10.7-10.8
Released Feb 1, 2013, fixes 50+ security flaws
http://www.esecurityplanet.com/patches/oracle-responds-to-java-security-flaws-wi th-50-fixes.html
Download and install
https://www.java.com/en/download/faq/java_mac.xml
For Java versions 6 and below OS X 10.5-10.6 machines
Apple supplies their own version of Java. For Mac OS X 10.6 and below, use the Software Update feature available under the Apple menu to check that you have the most up-to-date version of Java 6 for your Mac.
https://www.java.com/en/download/faq/java_6.xml
Java SE 6 End of Public Updates
After February 2013, Oracle will no longer post updates of Java SE 6 to its public download sites. We highly recommend downloading and installing Java 7.
If your considering upgrading OS X from 10.6.8 to 10.8 via AppStore to run Java 7
Be forewarned no PowerPC based programs or driver software will run any longer.
Check here BEFORE you upgrade OS X!
http://roaringapps.com/apps:table
Alternatives if you must run Java 7
If Apple disabled Java 6 in 10.6, and you can't upgrade OS X to 10.8, then your pretty much done with Java in OS X because Oracle won't issue updates for Java 6 anymore.
However you can install Windows 7 and continue to use Java 7+ there until support for Windows 7 ends in 2020.
Windows in BootCamp or Virtual Machine?
If your on 10.6, I very highly recommend the free Virtualbox for the virtual machine software as it gets updates, VMFusion and Parallels have moved on with only 10.7+

Change Password on first use does not work properly.

I have created apex application user in Oracle Apex 3.2 as follows
BEGIN
APEX_UTIL.CREATE_USER(
p_user_name => 'NEWUSER1',
p_web_password => 'secret99');
END;
As in the documentation
p_change_password_on_first_use IN VARCHAR2 DEFAULT 'Y',
User should be prompted to change password at first use. But it does not work properly. There is no such message. Still accepts user to log in with old passord that was first given to the user. I have tried explicitly to ensure change password at first log in. by
BEGIN
APEX_UTIL.CREATE_USER(
p_user_name => 'NEWUSER1',
p_web_password => 'secret99',
p_change_password_on_first_use =>'Y');
END;
Still does not work. How can I ensure user to change password on first login.
Hasan Al Mamun
Programmer
Bangladesh Bank
Dhaka, Bangladesh

Might be a long way around the problem but I would utilize a boolean flag in a column (FIRST_LOGIN) your custom auth table set to 'Y' when you create their account. Then on the login page have a page process something like:
** NOT TESTED **
declare
v_first VARCHAR2(10;
v_session NUMBER;
begin
v_session := APEX_CUSTOM_AUTH.GET_NEXT_SESSION_ID;
select FIRST_LOGIN into v_first from AUTH_TABLE where user_name = :P101_USERNAME and :P101_PASSWORD;
if v_first = 'Y' then
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v_session,
P_FLOW_PAGE => :APP_ID||':2' *** THIS IS YOUR PAGE TO HAVE THEM RESET THEIR PASSWORD ***
else
wwv_flow_custom_auth_std.login(
P_UNAME => :P101_USERNAME,
P_PASSWORD => :P101_PASSWORD,
P_SESSION_ID => v_session,
P_FLOW_PAGE => :APP_ID||':1' *** MAIN LOGIN PAGE *****
EXCEPTION WHEN OTHERS THEN
*** handled **
end;
The page 2 in this example would have an few items for them to enter their new password twice, a page process to update their password in the auth table and then redirect them to the intended first page.
Not sure if it meets your setup.
Ricker

Oracle 10g EM is not working properly

Similar Messages

Maybe you are looking for