Oracle 10g exp error with query parameter

Hi all,
I am trying to perform an export but getting this error when using the query parameter. I think it's a syntax problem but not sure where.
I'm in a dos prompt
E:\>exp file=xxxxx.dmp log=xxxx.log tables=xxxxx query='where responseid not in (select responseid from aaaa_bbbbb)';
LRM-00112: multiple values not allowed for parameter 'query'
EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help
EXP-00000: Export terminated unsuccessfully
Thx

This is why I love this forum so much.
I've probably done thousands of exports and never used the query parameter.
Here's something that will help you. Please read and note the requirement to escape, or protect, special characters and such.
http://download.oracle.com/docs/cd/B10501_01/server.920/a96652/ch01.htm
exp scott/tiger TABLES=emp QUERY=\"WHERE job=\'SALESMAN\' and sal \<1600\"ji li

Similar Messages

Expdp error with query parameter

i am trying to use datapump and using query parameter in there as below...
but when i use the below, its exporting some system "repcat$" tables and
nothing realted to scott.audit table or anything realted to my query where
clause...what am i doing wrong ??
expdp system
DUMPFILE=test.dmp
LOGFILE=test.log
DIRECTORY=DATA_PUMP_DIR
TABLES=SCOTT.AUDIT
QUERY=SCOTT.AUDIT:'"WHERE TRUNC (audit.audit_timestamp)
BETWEEN TO_DATE ('01012008','DDMMYYYY') AND TO_DATE ('13012008','DDMMYYYY')"'
also when i use scott instead of system user i get below error
Export: Release 10.2.0.3.0 - 64bit Production on Wednesday, 22 July, 2009 12:53:45
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-39145: directory object parameter must be specified and non-null

i treid again, but creating a new datapump dir as follows...create or replace dir dpdump as '/backup/dpdump/orcl';
then gave grant read,write on directory dpdump to system
and now why is oracle looking at a differnt location ?? even when i changed the
direcotry ???
$ expdp SYSTEM
DUMPFILE=test.dmp
LOGFILE=test.log
DIRECTORY=DPDUMP
QUERY=SCOTT.AUDIT:'"WHERE TRUNC (audit.audit_timestamp)
BETWEEN TO_DATE ('01012008','DDMMYYYY') AND TO_DATE ('13012008','DDMMYYYY')"'
Export: Release 10.2.0.3.0 - 64bit Production on Wednesday, 22 July, 2009 13:27:18
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORA-39001: invalid argument value
ORA-39000: bad dump file specification
ORA-31641: unable to create dump file "/oracle/app/oracle/product/10.2.0/admin/orcl/dpdump/expdat.dmp"
ORA-27038: created file already exists
Additional information: 1
$>
Seems little weird but can you:--
1. Drop the dpdump directory.
SQL> drop directory dpdump;
2. recreate it and then grant the permissions.
SQL> create directory dpdump as '/backup/dpdump/orcl';
The folders must exists in the location.
SQL> grant read,write on directory dpdump to system;
3. SELECT directory_name, grantee, privilege
FROM user_tab_privs t, all_directories d
WHERE t.table_name(+)=d.directory_name
ORDER BY 1,2,3;
Anand

Installing Oracle 10g and error with DISPLAY value

Hello, I am instaling Oracle 10g and when I run:
. /runInstaller
this error apear:
Can't connect to X11 window server using :0.0 as the value of DISPLAY variable.
how must I set de DISPLAY variable if I have instaling in a local system?
Thanks

Can't connect to X11 window server using :0.0 as the value of DISPLAY variable.you apparently set the display correctly (:0:0) if you are installing locally.
You could do a xhost + as user531326 if you did not start your X session as oracle
Message was edited by:
Laurent Schneider
note that xhost + is not a good security practice, have a look at
http://amath.colorado.edu/computing/unix/x/

Oracle 10g R2 installation with ASM+RAC

Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.

Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm

I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query parameter to report parameter i need to pass distinct values. How can i resolve this

I have SSRS parametarized report in that one data set have repeated values with query parameter . but while am mapping that query
parameter to report parameter i need to pass distinct values. How can i resolve this

Hi nancharaiah,
If I understand correctly, you want to pass distinct values to report parameter. In Reporting Service, there are only three methods for parameter's Available Values:
None
Specify values
Get values from a query
If we utilize the third option that get values from a dataset query, then the all available values are from the returns of the dataset. So if we want to pass distinct values from a dataset, we need to make the dataset returns distinct values. The following
sample is for your reference:
Select distinct field_name from table_name
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Oracle 9.2.0.7 vs Oracle 10.2.3 with COMPATIBLE parameter set to 9.2.0.7

Hi,
First off, I am NOT an oracle DBA (or even a DBA!), so please excuse my ignorance or errors contained within this post.
My client is currently planning to upgrade their 9.2.0.7 database server to 10.2.3. Reading through the oracle upgrade documentation, I came accross the compatible parameter, and further more you can set it to 9.2.0.7. I realise that by setting this, many new features introduced in Oracle 10g will not be available - however getting of the unsupported 9.2.0.7 platform is priority.
Can someone please advise what are the differences between a real 9.2.0.7 database server versus a 10.2.3 (with 9.2.0.7 compatible) server. By setting this will it guarantee sql scripts and external applications continue to work after the upgrade? I.e the list of compatibility issues detailed in the oracle database upgrade guide, will these issues be made irrelevant by this setting?
Your expert knowledge is appreciated.
Regards,
Shan

When upgrading from 9i to 10g the compatible parameter should be set to 9.2.0. All of the new feature will only be available when the parameter is set to 10.0.0 or higher and the instance restarted.
Once an instance has been restarted with a compaticble value of 10.0.0 it can never be set back to 9.x.
Why do you think the upgrade is required if you still want to use the features of 9.2.0.7?

Create a new user for oracle 10G ASM instance with sysdba system privilege

Hi,
In our Golden Gate Project, we require the SYS user credential to connect to the Oracle 10g ASM instance to read the database transaction logs.But our client is not providing the SYS user credential to connnect to ASM instance.
I'm getting the error message "ORA-01109: database not open",When I tried to create a new user using the below the steps in oracle 10g ASM instance
1. Login using "sqlplus / as sysdba"
2. Create user <username> identified by <password>;
But in oracle 11g ASM instance, I'm able to create new user by connecting the ASM instance with SYSASM role without issues.
Is there is any workaround to create a new user with sysdba system privilege in oracle 10g ASM instance?.
Thanks in advance .

Hi,
Recreate the password file for the ASM instance as follows:
Unix:
orapwd file=<ORACLE_HOME>/dbs/PWD<SID> password=<sys_password>
Windows:
orapwd file=<ORACLE_HOME>/database/PWD<SID>.ora password=<sys_password>
Now sys password is reset, we are ready to use sys for ASM management. I decided to create another user ASMDBA as I tried above.
SQL> create user ASMDBA identified by test01;
User created.
SQL> grant SYSASM, SYSOPER to ASMDBA;
Grant succeeded.
SQL> select * from v$pwfile_users;
USERNAME SYSDBA SYSOPE SYSASM
SYS TRUE TRUE TRUE
ASMDBA FALSE TRUE TRUE
Please see this link : http://orachat.com/how-to-change-asm-sys-password-creating-sysasm-user-11g/
Thank you

Oracle 10g Installation Error on Windows 2008 server

Hi Experts,
I have tried to install Oracle 10g via "51036975 ORACLE 10.2.0.4 Failsafe Server 3.4.1.5 Windows 2008" as per note no. Note 1303262 - Oracle on Windows Server 2008. Server is 64 bit server.
Oracle service is not getting started and showing as "starting" in services.msc. I cant stop the service. I have taken the restart of the server as well but no luck.
Just before the end of installation of Oracle, one pop up box named isqlplussvc opened up stating as "Failed to start the service, Error:0, the operation completed successfully".
Can you please suggest how to handle this error and start the service?
Regards,
Naresh.

Hi All,
Yes, I started with Failsafe server CD only. After trying installing Oracle couple of times, once the service didnt went into starting mode & it couldnt start as well. Then I started going ahead with SAP installation and later I found that the service got automatically started.
I was under the impression that the service has to be started before going for SAP installation.
Thanks all for your replies.
Regards,
Naresh.

Oracle 10g ODBC driver with Windows 7 32 bit connecting to Excel

Hi Everyone,
I'm having an issue connecting to our oracle 10g database (64 bit system) from a 32 bit windows 7 installation running excel 2010/2007 using odbc drivers. Our excel spreadsheets worked without issue in windows xp.
In windows 7 I have been able to install the odbc driver via the following method:
1. Download the oracle 'basic' client and oracle 'odbc' client from www.oracle.com and extract the contents:
instantclient-basic-win32-10.2.0.3-20061115
instantclient-odbc-win32-10.2.0.3-20061115
2. Create a folder 'oracle' and place the instantclient_10_2 folder inside.
3. Ensure all the basic and odbc files reside in this folder.
4. Create a 'network' folder within instantclient_10_2
5. Create an 'admin' folder within 'network'
6. Create sqlnet.ora and tnsnames.ora files within the 'admin' folder:
7. Run 'obdc_install' within the instantclient_10_2 folder
8. Download and run the oracle odbc driver exe file from www.oracle.com (ORA10203.exe)
9. Go to Control Panel -> Administrative Tools -> Data Sources and create a new System DN
This allows excel spreadsheets connecting ONLY to oracle to function.
Unfortunately some of our spreadsheets connect to both a MySQL database as well as oracle. Spreadsheets connecting only to MySQL also function correctly, however, as soon as the vb associated with a spreadsheet includes a mysql call followed by an oracle call the spreadsheets fail. In Excel 2007 excel crashes completely everytime. In Excel 2010 the mysql data is generated, then when the script hits to oracle odbc connection there is a long pause, the oracle ODBC driver connect pops up requesting a username/password (this didn't happen in xp), then the data source selection pops up, then the username/password connect screen pops up again, and finally it fails with a runtime error '1004' General ODBC error.
If you look at the VB script it's failing at the Refresh BackgroundQuery statement in the ODBC connection block:
With Worksheets("Oracle1").QueryTables.Add(Connection:= _
"ODBC;DSN=Oracle_ODBC;UID=user;PWD=password;SERVER=ORACLE_LINUX;", _
Destination:=Worksheets("Oracle1").Range("A1"))
.CommandText = strSql
.Name = "Oracle1_data"
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False
.BackgroundQuery = True
.RefreshStyle = xlOverwriteCells
.SavePassword = True
.SaveData = True
.AdjustColumnWidth = True
.RefreshPeriod = 0
.PreserveColumnInfo = True
.Refresh BackgroundQuery:=False
End With
Does anyone know how to get around this? It's very important!!
Also if you try to edit the oracle ODBC connections in Control Panels -> Administrative Tools -> Data Sources, ODBC crashes 95% of the time.
Advice greatly appreciated!!

Well, here's what I'd check anyway..
1) get Process Explorer from http://sysinternals.com
2) make a mysql connection, get a list of dll's loaded (include the location and version columns in the lower pane output)
3) close that, then make an ora odbc connection, get a list of dlls.
4) close that, then make a mysql connection followed by an ora odbc connection, get a list of dlls
5) compare the lists of loaded dlls. In particular, the difference between #3 and #4, is there a dll dependency that gets loaded by oracle's odbc that comes from a different location when you've opened a mysql connection first?
May or may not help, but might turn up a difference to help point you in a direction.
Greg

ORA-12952 and Oracle 10g XE problem with migration to 11g XE

Hi, all
My DB (Oracle 10g XE) reach storage limit. I have tried to migrate to 11g XE version but unsuccessful.
For migration I used next manual: http://download.oracle.com/docs/cd/E17781_01/install.112/e18803/toc.htm#XEINW136
expdp returned next error:
Processing object type DATABASE_EXPORT/SCHEMA/CLUSTER/INDEX
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.CREATE_OBJECT_ROWS while calling FORALL [TABLE]
ORA-12952: The request exceeds the maximum allowed database size of 4 GB
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 116
ORA-06512: at "SYS.KUPW$WORKER", line 6248
----- PL/SQL Call Stack -----
object line object
handle number name
2D6F0304 14916 package body SYS.KUPW$WORKER
2D6F0304 6300 package body SYS.KUPW$WORKER
2D6F0304 5638 package body SYS.KUPW$WORKER
2D6F0304 2145 package body SYS.KUPW$WORKER
2D6F0304 6861 package body SYS.KUPW$WORKER
2D6F0304 1262 package body SYS.KUPW$WORKER
285BD50C 2 anonymous block
Next I have tried to garbage some information from DB but I got some as "UNDO cannot get next block" error.
What else can I do to migrate the data from 10g with limitation problem to 11g?
Thank You in advance.

There is output from SQL:
"OWNER"; "TABLESPACE_NAME"; "COUNT(*)"; "SIZE_MB"
"A1"; "USERS"; "899"; "3995,9375"
"SYS"; "SYSTEM"; "980"; "323,1875"
"FLOWS_020100";"SYSAUX"; "658"; "297,625"
"SYS"; "SYSAUX"; "626"; "151,125"
"XDB"; "SYSAUX"; "753"; "84,5"
"SYSTEM";"SYSTEM"; "259"; "31,75"
"SYS"; "UNDO"; "10"; "20,25"
"MDSYS"; "SYSTEM"; "96"; "12,25"
"SYSTEM";"SYSAUX"; "109"; "6,8125"
"CTXSYS";"SYSAUX"; "74"; "4,625"
"D1"; "USERS"; "14"; "3,5625"
"DBSNMP";"SYSAUX"; "25"; "1,5625"
"HR"; "USERS"; "25"; "1,5625"
"FLOWS_FILES";"SYSAUX"; "7"; ",5"
"OUTLN"; "SYSTEM"; "8"; ",5"
"TSMSYS";"SYSAUX"; "4"; ",25"
1. When I tried to delete some old data from USERS dataspase by some PROCEDURE I got the next error:
ERROR at line 1:
ORA-30036: unable to extend segment by 8 in undo tablespace 'UNDO'
This problem I solved. PROCEDURE generate huge buffer for transaction. Therefore I deleted the old data by small pieces.
After I have deleted the old data the Application start to comunicate with database without ORA-12952 error.
2. I've reduced the size of SYSAUX (http://remidian.com/oracle/purging-sysaux-tablespace-purging-awr-reports.html) down to 94%
3. I has SYSTEM tablespace 100% full. When I've tried to resize the SYSTEM table up I got the ORA-12952. Then I've increased the SYSTEM table size by 1M. In such way I got additional 9Mb for the SYSTEM tablespace (from 360Mb to 369Mb 98%). Is any other way to reduce of the SYSTEM tablespace filling?
4. Next (http://wiki.oracle.com/page/Data+Pump+Export+%28expdp%29+and+Data+Pump+Import%28impdp%29)
on the step: $ expdp system/<password> DIRECTORY=expdp_dir DUMPFILE=expfull.dmp FULL=y LOGFILE=expfull.og
i got the error:
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.CREATE_OBJECT_ROWS while calling FORALL [TABLE]
ORA-12952: The request exceeds the maximum allowed database size of 4 GB
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 116
ORA-06512: at "SYS.KUPW$WORKER", line 6248
There is my last state of the tablespace filling:
"Tablespace"; "Size (MB)"; "Free (MB)"; "% Free"; "% Used"
"UNDO"; "500"; "411,6875"; "82"; "18"
"SYSAUX"; "570"; "31,5"; "6"; "94"
"USERS"; "4180"; "178,875"; "4"; "96"
"SYSTEM"; "369"; "1,25"; "0"; "100"
"TEMP"; "291"; "0"; "0"; "100"

Oracle 10g Database conflicts with HTMLDB

Hai all,
I have encountered a strange conflict when I am trying to work out with Oracle 10g database and the famous HTML DB.
It is like this:
I have a 10g DB installed and an ASP application that works on this 10g instance via "Microsoft ODBC driver for oracle" perfectly.
Now I have downloaded and installed the 10g Companion CD and installed the HTML DB 1.5 along with the mandatory Apache web server. Good!! I could scrawl through the database using the HTML DB, creating applications, forms, items and etc fancy things without any issues.
The problem that I found was:
The ASP based application that used to work initially now is erroring out saying that "TNS could not resolve service name".
I thought that the Listener might be damaged or the ASP site was damaged or the Microsoft ODBC driver files were damaged and several other vauge guessings.
I have tested the issue in several ways (reinstalled oracle, the DB, the ASP Applicaton, re-configurin listener in a variety of ways) but every time installing BLINDLY the companion CD too. Nothing seem to work.
Then I recollected that the same issue I have encountered in the past with the installation of Oracle 8i and Developer 2000, where the TNS listener configured by the former damages the one configured by the later and vice-versa.
Basing on this past reminiscence, I finally stopped installing Companion CD over the Oracle installation and carried out the DB installation and the ASP based app. And everything worked fine.
CAN anybody tell me what is going wrong with these two oracle products(Oralce 10g DB and the HTML DB+Apache)?
WHY always the installation of a CLIENT SW (Developer, HTML DB etc) damages the connection with the database via ODBC drivers?
Many Thanks in advance.
Ravi

Dera Mr. Tyler,
Thanks for your reply...I have implemented the solution that you have given for the TNS Listener conflict and everything works fine...
Here I have one more thing thats not working as I thought. do kindly help me out.
My requirement is to show the list of available storage drives (say C:, d:, e: etc on windows) available on the database server. Let me eloborate my problem well....
i have a Java App that executes a specific SQL script to create a tablespace, a user and the required db objects that my applicaiton needs.
if the Java App runs on the same machine where the oracle instance is running, the Java app pops up a list of available drives on the machine, creates a directory for the tablespace datafiles on the drive selected from the above list box, then runs the script which creates the tablespace and the rest of the things.
But if i run the Java app from another machine on the network, then my BLIND java app is popping up the drives of the local machine but NOT those from the oracle server machine and creates the folder on the local machine but not on the Oracle server and obviously the rest of the phases (tablespace creation itself) are failing as the required folder is not found on the oracle server machine.
the work arounds that i am thinking are:
a) use java ->
get the IP of the oracle server machine ->
use some java api such as java.net, java.io etc ->
create the required folder on the server machine instead of the local machihe
ISSUE: Java network programming is too tough for me(excuse me for this..i am not too good!!)
b) use some oracle sql or pl/sql api s to do the same
ISSUE: not found one!!!!
c) create a java stored procedure/function to get the list of drives of the oracle server and return as a string variable. then call this proc from the Java app once connected to the database....
ISSUE: i have created the SO-CALLEd java func. no compilation or loading errors. but there is no o/p either. but the same code when i run as a java class is showing the desired o/p. here is the code piece...can you please help me out!!!
-------Java Stored Function------
import java.io.*;
public class HDDLister
     public static String listDrives()
          String rootsList = "Available Roots: ";
          try
               File[]roots = File.listRoots();
               for (int i=0;i<roots.length;i++)
                    rootsList += roots.toString();
                    rootsList += "#";
          catch(Exception ex)
               rootsList = ex.toString();
          return rootsList;
-------Command to publish the Funciton-------
CREATE OR REPLACE FUNCTION HDDLISTER
RETURN VARCHAR2
IS
LANGUAGE JAVA
NAME 'HDDLister.listDrives() return java.lang.String';
and finally the point of the problem is, once we show the drives available on the server machine to the user and the user selects a drive, how to create a folder on the server machine???
Thousands of thanks in advance
Ravi

Oracle 10g DBCA error - not enough space on root?

Im running Oracle 10g on HP-UX 11i.
Oracle software is installed ok. Already created a database succesfully. I have now deleted that database and am creating a new one using dbca.
When I get to the final step I get the following error:
You do not have enough free disk space to create the database. You need at least 785,408KB on /, you only have 753,664KB available please allocate more free disk space.
The above is true but I am not putting any datafiles/ redo logs etc on root they are on a separte logical volume. Why does it need all this space on root? I cant add any more space to root anyway as I cant unmount root and extend it.
Cant find anything about this in the oracle documentation, I can only think my oracle software install has got messed up causing this strange error?
Can anyone help? Thanks.

@ Oracle software is installed ok. Already created a database succesfully. I have now deleted that database and am creating a new one using dbca.
When I get to the final step I get the following error:
You do not have enough free disk space to create the database. You need at least 785,408KB on /, you only have 753,664KB available please allocate more free disk space.
When you create database with DBCA, it gives a few options like General purpose, OLTP, etc.
Did you pick same options both the time?

Oracle 10g XE Error when trying to open manager in browser

Hi, i'm a newbies in oracle, i'm tryin to life with legal side, so in case with oracle i already downloaded oracle 10g Express Edition, i'm tryin to install it.. it succeed, but i dont know why if i try to open oracle home with this address in my browset [http://127.0.0.1:8080] its show an ERROR messages which is
220- PC-NAME
Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
220 PC-NAME FTP Server (Oracle XML DB/Oracle Database) ready.
530 Please login with USER and PASS.
530 Please login with USER and PASS.
530 Please login with USER and PASS.
530 Please login with USER and PASS.
530 Please login with USER and PASS.
530 Please login with USER and PASS.
530 Please login with USER and PASS.
530 Please login with USER and PASS.
530 Please login with USER and PASS.
221 Command Too Long. 2048 bytes maximum. Goodbye.
i had try to adding exception in windows firewall with *1521 ,8080, 2030,* but the message still occurs... i had try many ways too,, its BIG ZERO.... i got nothing,
i'm using windows vista Business... please anyone try to respon my thread....
thanks
Best Regards
Wildan Abdat

I figured a way around this in case anyone has the same problem in the future. I just opened Acrobat Pro X, clicked combine files into PDF, selected the file I wanted, saved the "binder" as PDF then saved another version as Reader Extended PDF. I think this helped because it essentially creaded a whole new PDF with the old PDF in it and getting rid of whater hashes or document properties in the last one that wouldn't allow it to work in Reader. Opens perfectly on other computers.

Oracle 10g install error, FC5

Im trying to install Oracle 10g on Fedora Core 5 (as per here: http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnFedora5.php).
But having problems.
The install process starts fine, then stops.
Here's the last few lines of "installActions2006-03-20"
INFO:
*** Language Selection Page***
INFO: Setting the 'SelectedLanguages ( SELECTED_LANGUAGES )' property to 'en,'. Received the value from response file.
INFO:
*** Specify Local Host Name Page***
SEVERE: Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support :"/u01/app/oracle/oraInventory/logs/installActions2006-03-20_04-11-37PM.log"
"/u01/app/oracle/oraInventory/logs/oraInstall2006-03-20_04-11-37PM.err"
"/u01/app/oracle/oraInventory/logs/oraInstall2006-03-20_04-11-37PM.out"
And here's the contents of "oraInstall.....err":
Exception java.lang.NoClassDefFoundError occurred..
java.lang.NoClassDefFoundError
at oracle.sysman.oii.oiin.OiinNetOps.computeHostInfo(OiinNetOps.java:230)
at oracle.sysman.oii.oiin.OiinNetOps.<init>(OiinNetOps.java:78)
at oracle.sysman.oii.oiin.OiinNetOps.getNetOps(OiinNetOps.java:89)
at oracle.sysman.oii.oiif.oiifw.OiifwHostNameWCDE.initialize(OiifwHostNameWCDE.java:111)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:152)
at oracle.sysman.oii.oiic.OiicDepWizEngine.doOperation(OiicDepWizEngine.java:424)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1273)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:546)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:929)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.runInstaller(OiocOneClickInstaller.java:1921)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2149)
Can anyone help me?
Thanks.
Mike

I have tried installing 10g several times and it keeps failing. You said that the document is complete and the installation works fine. I would love to know how you got your installation to work because I am getting the same problem that this guy ran into.
Re: Oracle 10g R2 on FC5; ORA-12157 error on installation
Here is just a small part of the errors I am getting in my log file.
==========================================================
Heap at VM Abort:
Heap
def new generation total 576K, used 369K [0xaba00000, 0xabaa0000, 0xabee0000)
eden space 512K, 65% used [0xaba00000, 0xaba54388, 0xaba80000)
from space 64K, 51% used [0xaba90000, 0xaba98398, 0xabaa0000)
to space 64K, 0% used [0xaba80000, 0xaba80000, 0xaba90000)
tenured generation total 1408K, used 550K [0xabee0000, 0xac040000, 0xafa00000)
the space 1408K, 39% used [0x
abee0000, 0xabf69af0, 0xabf69c00, 0xac040000)
compacting perm gen total 4096K, used 3564K [0xafa00000, 0xafe00000, 0xb3a00000)
the space 4096K, 87% used [0xafa00000, 0xafd7b3d8, 0xafd7b400, 0xafe00000)
Local Time = Sun Apr 30 02:20:24 2006
Elapsed Time = 0
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
# An error report file has been saved as hs_err_pid13937.log.
# Please refer to the file for further information.
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java has failed
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /u01/app/oracle/product/10.2.0/db_1
Configuration directory is set to /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK

Oracle 10g installation error in AIX 6.1 Platform

Friends ,
While installing Oracle 10g (10.2.0.1.0) on AIX 6.1 platform ,I get the following errors :
Checking operating system requirements ...
Expected result: One of 5200.004,5300.002
Actual Result: 6100.01
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Checking operating system package requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'AIX Version 6100.01' is not supported.
Recommendation: Install the required packages before continuing with the installation.
=======================================================================
Checking recommended operating system patches
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'AIX Version 6100.01' is not supported.
Recommendation: You may actually have installed patches which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the readme to find out how to get the missing patches.
=======================================================================
Is there any solution to resolve this problem like patch update or anything ? Barring this , does oracle 11g is recommended in AIX 6.1 unix platform ? Do you have any idea plz ?

shipon_97 wrote:
Friends ,
While installing Oracle 10g (10.2.0.1.0) on AIX 6.1 platform ,I get the following errors :
Checking operating system requirements ...
Expected result: One of 5200.004,5300.002
Actual Result: 6100.01
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Is there any solution to resolve this problem like patch update or anything ? Barring this , does oracle 11g is recommended in AIX 6.1 unix platform ? Do you have any idea plz ?Check certification matrix:
http://www.oracle.com/technology/support/metalink/index.html
10gR2 only 64bit is certified with AIX 6.1

Oracle 10g exp error with query parameter

Similar Messages

Maybe you are looking for