Oracle 10g on fedor 5

hi i m installing oracle 10.2 on fedora 5 but while starting run installer i m getting this message
=================================================
[oracle@Linux01 database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLin
ux-1.0, asianux-1 or asianux-2
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/Or
aInstall2007-08-27_11-29-14AM/installActions2007-08-27_11-29-14AM.log
======================================================
output of uname -a
Linux Linux01 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:14 EST 2007 x86_64 x86_64
x86_64 GNU/Linux

See Re: At this condition Can I install Oracle 10g

Similar Messages

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

ORA-12157 when installing Oracle 10g on Fedora 5?

Hi, Im installing Oracle 10g on Fedora 5, I did it once, but when I tried to set it up again I
got this error on the last part of the install...
ORA-12157: TNS: internal network communication error
Anybody know what might cause this?
I think I have installed all required RPMs and set environment variables, kernel parameters,
created oracle users and groups as needed, but still get the above error. I searched the error and some claim it is a problem using newer glibc 2.4.4, so I tried installing on Fedora 4 and had the same error even with glibc 2.3???
Thanks so much,
Jon

Oracle Database 10g Release 2 (10.2.0.1) Installation On Fedora Core 5 (FC5 X86) Step by Step
This is a Server Installation with a minimum of 2G swap, secure Linux disabled and the following package groups installed:
Editors
Graphical Internet
Administration Tools
Base
X Window System
System Tools
Server Configuration Tools
GNOME Desktop Environment
Development Libraries
Development Tools
Legacy Development Support
Legacy Server Support
Alternative installations may require more packages to be loaded, in addition to the ones listed below.
Download Software
Unpack Files
Hosts File
Set Kernel Parameters
Setup
Installation
Post Installation
Download Software
Download the following software:
Oracle Database 10g Release 2 (10.2.0.1) Software
openmotif21-2.1.30-14.i386.rpm
Unpack Files
Unzip the files:
unzip 10201_database_linux32.zipYou should now have a single directory containing installation files. Depending on the age of the download this may either be named "db/Disk1" or "database".
Hosts File
The /etc/hosts file must contain a fully qualified name for the server:
<IP-address> <fully-qualified-machine-name> <machine-name>Set Kernel Parameters
Add the following lines to the /etc/sysctl.conf file:
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
# semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default=262144
net.core.rmem_max=262144
net.core.wmem_default=262144
net.core.wmem_max=262144Run the following command to change the current kernel parameters:
/sbin/sysctl -pAdd the following lines to the /etc/security/limits.conf file:
* soft nproc 2047
* hard nproc 16384
* soft nofile 1024
* hard nofile 65536Add the following line to the /etc/pam.d/login file, if it does not already exist:
session required /lib/security/pam_limits.soDisable secure linux by editing the /etc/selinux/config file, making sure the SELINUX flag is set as follows:
SELINUX=disabledAlternatively, this alteration can be done using the GUI tool (Desktop > System Settings > Security Level). Click on the SELinux tab and disable the feature.
Setup
Install the following packages:
# From Fedora Core 5 DVD
cd /media/dvd/Fedora/RPMS
rpm -Uvh setarch-*
rpm -Uvh --force tcl-*
rpm -Uvh libXp-*
rpm -Uvh openmotif-2*
rpm -Uvh compat-db-*
rpm -Uvh compat-libstdc++-33*
rpm -Uvh compat-libf2c-32-*
rpm -Uvh compat-gcc-32-*
rpm -Uvh libaio-*
rpm -Uvh compat-gcc-32-c++-*
rpm -Uvh compat-libstdc++-296*
rpm -Uvh compat-libgcc-296*
# From download
rpm -Uvh openmotif21-2.1.30-14.i386.rpmCreate the new groups and users:
groupadd oinstall
groupadd dba
groupadd oper
useradd -g oinstall -G dba oracle
passwd oracleCreate the directories in which the Oracle software will be installed:
mkdir -p /u01/app/oracle/product/10.2.0/db_1
chown -R oracle.oinstall /u01Login as root and issue the following command:
xhost +<machine-name>Edit the /etc/redhat-release file replacing the current release information (Fedora Core release 5 (Bordeaux)) with the following:
redhat-4Login as the oracle user and add the following lines at the end of the .bash_profile file:
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1; export ORACLE_HOME
ORACLE_SID=TSH1; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/jre:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fiInstallation
Log into the oracle user. If you are using X emulation then set the DISPLAY environmental variable:
DISPLAY=<machine-name>:0.0; export DISPLAYStart the Oracle Universal Installer (OUI) by issuing the following command in the database directory:
./runInstallerEnter the appropriate ORACLE_HOME and name then continue with the installation.
During the installation, before the linking phase, edit the contents of the "$ORACLE_HOME/bin/gennttab" file, amending the following entries:
# Change this...
LIB=`$ECHO ${TtoLIB} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
INI=`$ECHO ${TtoINI} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
BAS=`$ECHO ${TtoBAS} | $SED 's/ /\\
/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
# To this...
LIB=`$ECHO ${TtoLIB} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
INI=`$ECHO ${TtoINI} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`
BAS=`$ECHO ${TtoBAS} | $SED 's/ /\n/g' | $GREP "^${T}:" | $AWK -F: '{print $2}'`If you don't do this the ntcontab will hang indefinitely during the linking phase.
Post Installation
Edit the /etc/redhat-release file restoring the original release information:
Fedora Core release 5 (Bordeaux)Finally edit the /etc/oratab file setting the restart flag for each instance to 'Y':
TSH1:/u01/app/oracle/product/10.2.0/db_1:Y
Ref.: http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnFedora5.php

Installation of Oracle 10g over Fedora 8??,

Hi,
I am installing Oracle 10g over Fedora 8 running on VMWare .
Now the problem that I am facing is listed below:-
--> When i try to run ./runInstaller, it gives me some following error
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-01-17_08-46-12AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
--> When i tried to troubleshoot the same, i found out that i should execute the same using command "./runInstaller -jreLoc /usr/lib/jvm/jre". I don't know why, but the same was given on One Website. Please let me know for the same, as this worked once, and now when I am again trying to do the same, the oracle installer windows open, but with abnormal termination and threw this error
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-01-17_09-15-17AM/oui/lib/linux/liboraInstaller.so: /tmp/OraInstall2010-01-17_09-15-17AM/oui/lib/linux/liboraInstaller.so: cannot restore segment prot after reloc: Permission denied
Please try and provide me solution for the same.
Also, I wanted to ask that the prerequisite packages, which are needed to install. I install them using yum installer, which always downloads and updates the packages,, Isn't there anything which i can download the same well before and install everytime I needed it. Please clear my way for this, as I always wanted to find the solution for the same.
Thanks..
Edited by: user12289471 on Jan 16, 2010 11:14 PM

Hi,
Post your question in the appropriate Database Installation.
Thanks,
Hussein

Install oracle 10g on fedora 9

Hi,
I want to install oracle 10g on fedora 9. is it possible.
If yes
I download oracle 10g for linux from
[form oracle.com|http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201linuxsoft.html]
and when i run it on fedora 9 it give me error like
Using paramFile: /10201_database_linux32/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2009-02-17_03-34-41PM/installActions2009-02-17_03-34-41PM.logIf i need to download diff s/w please send me any link or it is not supported.
Thanks

Umesh,
I don't think so it supported but you can download oracle for enterprise linux and try it out.
http://edelivery.oracle.com/linux
For platform certification see following link,
http://www.oracle.com/technology/support/metalink/index.html
Regards

Install Oracle 10g on Fedora *

Hi,
I have fedora 8 on my laptop.
I am trying to install Oracle 10g on Fedora 8.
while installing Oracle, I am getting the following error.
"java: xcb_xlib.c:50: xcb_xlib_unlock: Assertion 'c->xlib.lock' failed "
How do I resolved this error???
Can you suggest me what are pre requirement packages for Install Oracle 10g on Fedora 8??
Otherwise,
Can you help me What are steps to follow to install on Fedora 8 ??
Thanks for your time and attention,
Satish

Hi, I'm also trying to install Oracle 10g on Fedora 8 but I have the following problem: whenever I run the runInstaller file, I get this message:
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-09-06_03-23-01PM. Please wait ...[oracle@dhcppc0 ~]$ Exception in thread "main" java.lang.UnsatisfiedLinkError
: /tmp/OraInstall2008-09-06_03-23-01PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
Can anyone please help? Thanks a lot!

Oracle 10g for Fedora Linux 3 with Kernel 2.6.9

Can any body suggest a link, from where I can download the Oracle database 10g for Fedora Core 3 Linux with Kernel version 2.6.9-1*.
I went through the oracle site site but i was not able to find a one for Fedora 3 instead i found for Fedora 4.
Thanks.......
Suneel

You will not find one exactly as you require.
As I suggested in the duplicate link
Oracle 10g for Fedora Linux 3 with Kernel 2.6.9 you need to take a version of Oracle that seems to close to your Linux and then carefully tinker to make it work.,

Reinstallation of oracle 10g on Fedora Core 2

Dear Oracle community,
I tried to install Oracle database 10g software (Enterprise-edition) on
my PC (Fedora Core 2) in two steps. At first the software only
(as described in
http://www.oracle-base.com/articles/10g/OracleDB10gInstallationOnFedora2.php)
and then (using dcba) the example data base "sales".
The first step was succesfully. The second step has led to a "freeze" of
my computer. Input became impossible - so after running about 30 minutes
(100% CPU usage) I stopped my computer switching the power off.
Now I deleted the whole installation of Oracle manually as far as
possible (as far as I know/found the changes). Afterwards I tried to
reinstall the software. This was now impossible - the same "freezing"
effect happened now already in the first step. What are the reasons
for that? Can you help me to solve the problem?
I fear that some configuration files might be now corrupted and I have to
reinstall Fedora2 to be sure that nothing else is damaged.
Up to now I was only a user of a Oracle data base - it is the first time
that I try to install Oracle.
I have read the forum stuff about installation of 10g on Fedora Core 2
but do not find remarks for my problem.
Here are further details which could be important:
My PC has 2 processors and 2GB RAM and 2GB swap space.
The PC is located in a small Intranet and gets its IP-address by DHCP.
LINUX is installed (Fedora 2, kernel 2.6.5-1.358smp), as well as
a Web-server (httpd-2.0.51-2.7.rpm),
Java (j2sdk-1.4.2_05-fcs.rpm) and
tomcat (jakarta-tomcat-4.1.30-LE-jdk14.tar.gz)
(perhaps there is some disturbing interaction between installed
Java-version and the Java-Version supplied by the Oracle software?)
I followed the instructions in the installation description given in the
above mentioned web site but with some minor changes:
- /etc/hosts:
127.0.0.1 obox local_host.local_domain
192.168.2.3 oracle.home obox
- instead to create a directory in which the Oracle software will be
installed:
mkdir -p /u01/app/oracle/product/10.1.0/db_1
chown -R oracle.oinstall /u01
I created the following:
mkdir -p /opt/oracle/10.10
chown -R oracle.oinstall /opt/oracle
- The .bash_profile of the oracle user I modified a little bit:
# Oracle Settings
TMP=/oracle/tmp
ORACLE_BASE=/oracle/oradata #
ORACLE_HOME=/opt/oracle/10.1.0
ORACLE_SID=Test1
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
# after installation I've seen that I forgot a colon between /lib and
# /usr/lib in LD_LIBRARY_PATH - perhaps this is a reason for hanging
# of the computer installing the example database "sales"?
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
# after software installation I did not found $ORACLE_HOME/JRE but
# $ORACLE_HOME/jre - and I changed the CLASSPATH
- the following part I transfered to /etc/profile
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
- In a first step I installed only the Oracle Software without any
problems (but with the error in the definition of LD_LIBRARY_PATH and
CLASSPATH respectively)
- I performed the post installation steps except that I did not change
the content of /etc/oratab because I did not want to start Oracle
automatically starting the computer
- Then I started the dbca to create the data base "sales". I could enter
all wanted parameters (I named the data base "test1" to be conform
with ORACLE_SID . Then dcba started the creation of the data base
but did not end (hanging)
- I looked for possible errors, corrected the definition of CLASSPATH
and LD_LIBRARY_PATH respectively and wanted to reinstall Oracle
- I applied the following commands to delete all (???) data files
created in the installation process
rm /etc/oratab
rm /etc/oraInst.loc
rm -R /etc/oracle
rm /usr/local/bin/oraenv
rm /usr/local/bin/coraenv
rm /usr/local/bin/dbhome
rm -R /opt/oracle/10.1.0/*
rm -R /opt/oracle/oraInventory
rm -R /oracle/tmp/*
rm -R /oracle/oradata/*
- now (after restart of the PC) I wanted to install the Oracle software
anew. After specifying ORACLE_HOME and running a script as root the
OUI started to load and unzip files from the installation directory
Disk1 and runs in an endless loop (about 66% of the work was done).
- After restart of my PC I made a second trial and already after the
input of the first parameter the OUI runs in an endless loop
- the endless loop: 2 java instances were running using 100% CPU
and input by keyboard was not accepted.
Many thanks in advance
Klaus!

Hi Klaus,
Have you had any luck in resolving this problem. It sounds like the exact same problem I am having

Oracle 10g on Fedora Core 5

Is there a pre-packaged version of Fedora Core 5 which includes Oracle 10g for Linux?
This way, all you have to do is select Install Oracle 10g and it includes any special packages for installing Oracle 10g. Plus, after installation, it automatically starts up the Oracle 10g installer. It could even do the pre-installation stuff such as creating the oracle user. I do not know how, but this oracle user would be the only user using an old gcc compatible with Oracle software. Via its environment maybe?
Right now, it is a Pain-in-the-neck to install Oracle on Linux. The installation guide Oracle provides is not enough. You have to do a search on the web for pages detailing more info. Or you have to install a special file or set variables to make the Oracle installer think it is installing on Red Hat Enterprise Linux. I have to hide the gcc that comes with Linux and install an old verison of it. At one time, I even had to compile a library so the java installer could run. This is ridiculous, I should not have to jump through hurdles to install Oracle.
Does anyone out there have such a set of Fedora Core 5 ISO images? Shoot, FC4 would do too.

No. I'm not particular to Fedora. Fedora has been a distribution which works on my (please don't laugh) emachines computer at home. I've had Oracle 9i enterprise installed on fedora core 3.
Ubuntu and Debian are good distros as well. I have not been successfull with Suse though.
Suse in the past -- the installer could not get the graphics correct -- garbage just displays -- so i could never install it. Maybe SuSe 10 has improved since then.
I found this about Suse and Oracle. So, this may work for me. Otherwise, i will try Centos.
http://www.novell.com/coolsolutions/tip/16193.html
Thanks for the info.

Installation of Oracle 10g on Fedora 9

OK,
I need to install Oracle 10g R2 on fedora 9 OS.
I have already tried 10201_database_linux32.zip, but it seems its not compatible with Fedora 9 as it says
os version must be redhat -3, suse-9, redhat-4, unitedlinux-1,asianux-1 or asian ux-2
Can anyone guide me with the proper installable of Oracle compatible with Fedora 9 and install instructions?
Thanks in Advance

Try using the doris script available here: http://dizwell.com/2008/05/01/doris-redux/
Does the job in one command, and hides your operating system specifics from the Oracle installer while it does it.
There's even a video of it being used here: http://dizwell.com/2008/09/29/proving-a-point/ Even though that's of 11g on Fedora 9, the script says it works for 10g on Fedora 9 in the same way. I haven't done that myself, but the site owner says he has, so you should be OK.

Oracle 10G on fedora 15

Hi all,
I want to install oracle 10G(10.2) Database express on fedora 15.
I followed all the prescribed steps but still unable to get it done.That's why I had to post the question.
I am writing all the commands that i used and also the errors so that you all may correct me.
After increasing the swap size of my linux system to prescribed 1GB,I installed oracle 10G in my system.
The swap files status is correctly shown using the swapon command,so this does not seems to be an issue.
But the real problem starts when I try to start the listener.....
The classpath settings in my /etc/profile is as follows:
export ORACLE_HOME="/usr/lib/oracle/xe/app/oracle/product/10.2.0/server"
export PATH=$ORACLE_HOME/bin:$PATH:/usr/local/jdk/bin:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/lsnrctl:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus:/usr/lib/oracle
export ORACLE_SID="XE"
export NLS_LANG="AMERICAN_AMERICA.US7ASCII"
export LD_LIBRARY_PATH="ORACLE_HOME/lib:$LD_LIBRARY_PATH"
export SQLPATH="$ORACLE_HOME/sqlplus/admin"
Now where am i wrong in these settings,if i am?
The listener.ora file is
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE)) //I have commented this line//
(ADDRESS = (PROTOCOL = TCP)(HOST = shekhar)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
Now ,the series of error appears when i try to login from sqlplus
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
also,I am unable to open the home page for my login on my browser.
Starting the listener,by command lsnrctl start,i get following error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=shekhar)(PORT=1521)))
TNS-12535: TNS:operation timed out
TNS-12560: TNS:protocol adapter error
TNS-00505: Operation timed out
Linux Error: 110: Connection timed out
I also get 'resource already in use' error sometimes.That is to say,I never have my listener started.Do I have to make any changes in my listener.ora file?
That's all I have to mention.
I request you all to please help me out of this problem.Any help will be really appreciated.
Waiting for your reply.
Thanks.....................................................

Verify the hostname and IP address, that they resolve both ways (hostname and IP), also check netstat to ensure nothing else has the 1521 port in use. The HOST= listener entry ought to be the FQDN, it could be the IP, or when in doubt (i.e. if the host uses DHCP) the "any IP" address of 0.0.0.0 can also work. For the "easy" way out.
$ hostname
$ nslookup -sil <hostname>
... -> n.n.n.n
$ nslookup -sil <n.n.n.n>
... -> <hostname>
$ cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
n.n.n.n <hostname>.<domainname> <hostname>
$ netstat -an |egrep 1521
# if there is a:
... tcp <n.n.n.n>:1521 0.0.0.0:* ... LISTEN...
# pick a different port. Add the port# exception to the firewall. If you want remote connections.Is the network interface enabled?
$ ifconfig -a
ethN ... <n.n.n.n> ...Make sure it has an IPv4 address and its correct.
export NLS_LANG="AMERICAN_AMERICA.US7ASCII"That isn't needed, and isn't correct, the character set should be AL32UTF8. And won't have any effect except for stuff you're running at the command line, i.e. expdp, the older exp, or some other client utility.
... IPC ... //I have commented this line//That's fine. It isn't needed.
Check the alertlog for the startup attempt. The engine may gripe on a memory parameter setting, can't recall the exact error but it has to do with changes in shared memory stuff. I've installed to Fed15 with no trouble, other than having a few MB short of a full 1GiB allocated to swap.
For trying startup/shutdown use a switch user oracle and the instance will be much happier. And add your userID to the ora group to allow a sysdba connection without using the su ... oracle bits, but only when you're not doing a startup.
Sometimes the ...env.sh barfs on the NLS environment .sh call, but it's not critical. To make it really easy pull those bits from the ...env.sh into your own ora_env file to source.
$ ... set environment <period><space>...OH/bin/oracle_env.sh
   # OR set up your own ~/ora_env
   $ cd
   $ egrep -v NLS ...OH/bin/oracle_env.sh > ora_env
   $ . ./ora_env
$ sudo su - oracle -c "sqlplus /nolog"
... connect /as sysdba
... ? connected ... Idle Instance ? ... startup;
$Edited by: clcarter on Jan 20, 2012 12:44 PM
fix env .sh

Instalation Problem Oracle 10g In Fedora Core 4

Hello
I have this installer oracle-xe-univ-10.2.0.1-1.0.i386.rpm already installed in Fedora Core 5 without any problem
when i didt it for Fedora Core 4 (other machine i have this error) (same instalation configuration!!!)
[root@localhost Section1]# rpm -Uvh oracle-xe-univ-10.2.0.1-1.0.i386.rpm
Preparing... ########################################### [100%]
1:oracle-xe-univ ########################################### [100%]
Executing Post-install steps...
You must run '/etc/init.d/oracle-xe configure' as the root user to
configure the database.
[root@localhost Section1]# /etc/init.d/oracle-xe configure
Oracle Database 10g Express Edition Configuration
This will configure on-boot properties of Oracle Database 10g Express
Edition. The following questions will determine whether the database should
be starting upon system boot, the ports it will use, and the passwords that
will be used for database accounts. Press <Enter> to accept the defaults.
Ctrl-C will abort.
Specify the HTTP port that will be used for Oracle Application Express [8080]:8081
Specify a port that will be used for the database listener [1521]:1521
Specify a password to be used for database accounts. Note that the same
password will be used for SYS and SYSTEM. Oracle recommends the use of
different passwords for each database account. This can be done after
initial configuration:
Confirm the password:
Do you want Oracle Database 10g Express Edition to be started on boot (y/n) [y]:n
Starting Oracle Net Listener...Done
Configuring Database...grep: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/log/*.log: No such file or directory
Done
/bin/chmod: cannot access `/usr/lib/oracle/xe/oradata/XE': No such file or directory
/bin/chmod: cannot access `/usr/lib/oracle/xe/oradata/XE': No such file or directory
Starting Oracle Database 10g Express Edition Instance...Done
Installation Completed Successfully.
To access the Database Home Page go to "http://127.0.0.1:8081/apex"
[root@localhost Section1]#when i start up
[root@localhost Section1]# /etc/init.d/oracle-xe enable
[root@localhost Section1]# /etc/init.d/oracle-xe start
Starting Oracle Net Listener.
Starting Oracle Database 10g Express Edition Instance.
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
[root@localhost Section1]#i cant open the browser with the url http://127.0.0.1:8081/apex
of course that i can do this in my other FC5
how i can resolve this???
thanks so much for advanced
Regards

2) XE Forum. If you have XE working and can get to the web page, you should see the link to register for the XE forum. You must register and then 'sign in' to see the XE forum. The link on your XE home page should point to http://www.oracle.com/technology/xe/registration'
1) What's the difference ... ?
OK ... here we go ....
Oracle has hundreds of products. I like to group them into 'technology' and 'application' products.
The 'technoloy' products I group into
- data management == database
- data access == applicaiton server (fusion)
- data manipulation == developer tools and languages
- data sharing == collaboration suite
Without data access, the data management and data manipulation is plain 'client-server' stuff.
With data access, you stick an application server (web server, J2EE server, other server) between the client and the database.
The Oracle Application Server is a collection of Oracle technology designed to support n-tier computing. The technology includes:
- http server (Apache stuff)
- reporting server
- portal server
- forms/data entry server
- generic J2EE server
- BPEL and SOA orchestration
- Web Services server
- workflow and intergration server
- centralized security and single sign-on server
and a lot more.
The Oracle database, of course, stores and manages data. Oracle now has many 'database managers', including
- Oracle Database == the traditional one
- Times Ten == in memory only, but very high speed
- Berkeley == embedded (to be included as part of your application)
- Lite == for laptops and remote devices
and more
The traditional Oracle database has many features. These features may not be needed by all organizations. So Oracle has created several editions. These are Express, Standard Edition One, Standard Edition, Enterprise Edition and Personal Edition. In the order presented, each adds more feature than the one before but includes all the features from the one before.
The Express Edition has the fewest features and the simplest install. It has no official Oracle support and has size limitations (4GB data max, only runs one 1 CPU). It includes Application Express which allows you to access the data from a web browser. I think of this as 'Microsoft Access, with Oracle multi-user reliability, on the Web'.
The Standard Edition One has everything from Express and adds: Java in the database, ability to use up to 2 CPU, many more features such as multi-media storage, no data size limit. It also changes the install to use the Oracle Univeral Installer.
Standard Edition adds Real Application Cluster to allow up to 4 CPU to be used, whether the 4 CPU are on one, two or four machines.
Enterprise Edition adds many high availability and scalability features to ensure the database will try to stay up all the time and will be able to handle many hundreds or thousands of users. Many DBA features are added to allow detailed tuning and management. And many options such as Partitioning, Label Security and Spatial can be purchased and added to this edition.
Personal Edition includes all of Enterprise Edition AND all of the Enterprise Edition options except Real Application Cluster. It is designed to be used by the Oracle developer so it is very inexpensive (in comparison to the Enterprise Edition) but it is limited (by the honor system) to one user access.
So when you use Express Edition, everytthing you do can be done in Enterprise Edition as well. Express Edition is a great learning tool for getting comfortable with the commercial Oracle database. It is also a great tool for developing applications for small organizations or even for home use. A great tutorial for XE is at http://st-curriculum.oracle.com/tutorial/DBXETutorial/index.htm
All of this is described in a few pages of documentation (about 70 thousand) at http://docs.oracle.com. If you want to understand Oracle well, you may have to spend a bit less time with the nuns for a while.

Prob Installing oracle 10g on fedora core-1

i'm getting this error message while installing :
[root@localhost cdrom]# ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, UnitedLinux-1.0 or redhat -3
Failed <<<<
I have installed the following pakcages:
make-3.79
binutils-2.11
openmotif-2.2.2-16
setarch-1.3-1
compat-db-4.0.14.5
compat-gcc-7.3-2.96.122
compat-gcc-c++-7.3-2.96.122
compat-libstdc++-7.3-2.96.122
compat-libstdc++-devel-7.3-2.96.122
WHAY I'M GETING THIS ERROR MSG AND HOW CAN I OVER COME IT

hi tomva,
at /etc/redhat-release this thing is written , think it's ok,
Fedora Core release 1 (Yarrow)
i've tried ./runInstaller -ignoreSysPrereq but showing the msg
Checking operating system version: must be redhat-2.1, UnitedLinux-1.0 or redhat-3
Failed <<<<
Ignoring required pre-requisite failures. Continuing...Error: OUI cannot be launched because the current working directory is set on the CD-ROM mount point. Launching OUI from this directory will m ake it difficult to unmount the disk later in the installation. Please change the working directory and relaunch OUI.
SHOULD I RUN THE INSTALLATION BY COPYING THE CDROM CONTENTS TO A DIRECTORY AND RUN FROM THAT DIRECTORY?

Oracle 10g install error, FC5

Im trying to install Oracle 10g on Fedora Core 5 (as per here: http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnFedora5.php).
But having problems.
The install process starts fine, then stops.
Here's the last few lines of "installActions2006-03-20"
INFO:
*** Language Selection Page***
INFO: Setting the 'SelectedLanguages ( SELECTED_LANGUAGES )' property to 'en,'. Received the value from response file.
INFO:
*** Specify Local Host Name Page***
SEVERE: Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support :"/u01/app/oracle/oraInventory/logs/installActions2006-03-20_04-11-37PM.log"
"/u01/app/oracle/oraInventory/logs/oraInstall2006-03-20_04-11-37PM.err"
"/u01/app/oracle/oraInventory/logs/oraInstall2006-03-20_04-11-37PM.out"
And here's the contents of "oraInstall.....err":
Exception java.lang.NoClassDefFoundError occurred..
java.lang.NoClassDefFoundError
at oracle.sysman.oii.oiin.OiinNetOps.computeHostInfo(OiinNetOps.java:230)
at oracle.sysman.oii.oiin.OiinNetOps.<init>(OiinNetOps.java:78)
at oracle.sysman.oii.oiin.OiinNetOps.getNetOps(OiinNetOps.java:89)
at oracle.sysman.oii.oiif.oiifw.OiifwHostNameWCDE.initialize(OiifwHostNameWCDE.java:111)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:152)
at oracle.sysman.oii.oiic.OiicDepWizEngine.doOperation(OiicDepWizEngine.java:424)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1273)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:546)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:929)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.runInstaller(OiocOneClickInstaller.java:1921)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2149)
Can anyone help me?
Thanks.
Mike

I have tried installing 10g several times and it keeps failing. You said that the document is complete and the installation works fine. I would love to know how you got your installation to work because I am getting the same problem that this guy ran into.
Re: Oracle 10g R2 on FC5; ORA-12157 error on installation
Here is just a small part of the errors I am getting in my log file.
==========================================================
Heap at VM Abort:
Heap
def new generation total 576K, used 369K [0xaba00000, 0xabaa0000, 0xabee0000)
eden space 512K, 65% used [0xaba00000, 0xaba54388, 0xaba80000)
from space 64K, 51% used [0xaba90000, 0xaba98398, 0xabaa0000)
to space 64K, 0% used [0xaba80000, 0xaba80000, 0xaba90000)
tenured generation total 1408K, used 550K [0xabee0000, 0xac040000, 0xafa00000)
the space 1408K, 39% used [0x
abee0000, 0xabf69af0, 0xabf69c00, 0xac040000)
compacting perm gen total 4096K, used 3564K [0xafa00000, 0xafe00000, 0xb3a00000)
the space 4096K, 87% used [0xafa00000, 0xafd7b3d8, 0xafd7b400, 0xafe00000)
Local Time = Sun Apr 30 02:20:24 2006
Elapsed Time = 0
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
# An error report file has been saved as hs_err_pid13937.log.
# Please refer to the file for further information.
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java has failed
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /u01/app/oracle/product/10.2.0/db_1
Configuration directory is set to /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK

How to install and configure Oracle 10g Express Edition on Fedora 11?

Hi everyone!
I have recently installed Oracle 10g XE on my Laptop Gateway T-1625, which has Fedora 11.
I followed the install instructions on [http://st-curriculum.oracle.com/tutorial/DBXETutorial/index.htm] , and configured the server as explained, but something is wrong... When I try to go to the database home page http://127.0.0.1:8080/apex, I get "Failed to Connect" on Firefox 3.5b4... I don't think it's because of the Firefox version because it's proved to be very stable (for a beta).
I've search for similar issues on GNU/Linux and I found this thread in these forums: [ http://forums.oracle.com/forums/thread.jspa?threadID=915218&tstart=0] , but the solution is for Ubuntu 9.04, and if it's possible I would like to know a specific solution for Fedora 11.
I also tried to see the oracle server status with:
# /etc/init.d/oracle-xe status
And I got this....
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 25-JUN-2009 22:10:31
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=talos)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
I hope someone can help me out and guide me on the right direction. Thanks a lot!

Hi again!
After your last post I realized that the dba group and the oracle user already existed.
#groupadd dba
groupadd: group dba exists
#useradd oracle -d /home/oracle -s /bin/bash -g dba
useradd: user oracle existsHowever, I finally assigned a password for that account and changed the ownership of the /usr/lib/oracle/xe
with the commands you suggested:
passwd oracle
chown -R oracle:dba /usr/lib/oracle/xeAfter this, I can log in as the oracle user but the SELinux showed a warning and the /usr/lib/oracle/xe
is treated as the oracle home, and no .bashrc file is located on this home. This is the SELinux warning:
SELinux is preventing gdm-session-wor (xdm_t) "write" to /usr/lib/oracle/xe (lib_t).
Details:
SELinux denied access requested by gdm-session-wor. /usr/lib/oracle/xe may
be a mislabeled. /usr/lib/oracle/xe default SELinux type is user_home_dir_t, but its
current type is lib_t. Changing this file back to the default type, may fix your problem.
File contexts can be assigned to a file in the following ways.
* Files created in a directory receive the file context of the parent
directory by default.
* The SELinux policy might override the default label inherited from the parent directory
by specifying a process running in context A which creates a file in a directory
labeled B will instead create the file with label C.
An example of this would be the dhcp client running with the dhclient_t type and
creates a file in the directory /etc. This file would normally receive the etc_t type due
to parental inheritance but instead the file is labeled with the net_conf_t type
because the SELinux policy specifies this.
* Users can change the file context on a file using tools such as chcon, or restorecon.
This file could have been mislabeled either by user error, or if an normally confined
application was run under the wrong domain.
However, this might also indicate a bug in SELinux because the file should not have
been labeled with this type.
If you believe this is a bug, please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi)
against this package.
Allowing Acces:
You can restore the default system context to this file by executing the restorecon command.
restorecon '/usr/lib/oracle/xe', if this file is a directory, you can recursively restore using
restorecon -R '/usr/lib/oracle/xe'.
Fix command:
restorecon '/usr/lib/oracle/xe'I suppose the command #useradd oracle -d /home/oracle -s /bin/bash -g dba is where I can define the user's home, but if this user already exists how can I modify its settings?
is SELinux preventing the .bashrc file to be created? or what could be causing this?.
I hope you know how much I appreciate your help and want to thank you for your time.

Oracle 10g on fedor 5

Similar Messages

Maybe you are looking for