Oracle 11G Direct SQL Load with Data Guard
Does SQL Loader in direct mode always bypass the writing of redo logs ?
If the database has force logging on, will SQL Loader in direct mode bypass the writing of redo logs ?
Is there a way to run SQL Loader in direct mode that will create redo logs that can be applied by Data Guard to the backup database ?
846797 wrote:
Does SQL Loader in direct mode always bypass the writing of redo logs ?
If the database has force logging on, will SQL Loader in direct mode bypass the writing of redo logs ?
Is there a way to run SQL Loader in direct mode that will create redo logs that can be applied by Data Guard to the backup database ?In case of data guard setup , redo logs will always be generated.
Similar Messages
-
Oracle 11g R2, Problem Loading Spatial Data
We have a geodatabase which has been implemented by oracle spatial. it has been working quite fine since 2 years ago. Recently the data center serving our geodatabase has been upgraded on both software and hardware specifications. The handler application now has difficulty retrieving spatial data. The problem is somehow strange; only some spatial objects are loaded and then application encounters exceptions.
Previous working database engine was an Oracle 11g R1 and the new one is Oracle 11g R2. The application is a java application mostly written by swing. Here is the stack trace:
java.sql.SQLRecoverableException: No more data to read from socket
at oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1200)
at oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:1155)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:279)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
at oracle.jdbc.driver.T4CCallableStatement.fetch(T4CCallableStatement.java:1079)
at oracle.jdbc.driver.OracleResultSetImpl.close_or_fetch_from_next(OracleResultSetImpl.java:369)
at oracle.jdbc.driver.OracleResultSetImpl.next(OracleResultSetImpl.java:273)
at ir.mas.aamar.service.map.MapService.getModifiedMap(MapService.java:405)
at ir.mas.aamar.map.MapPanel.redrawLayers(MapPanel.java:504)
at ir.mas.aamar.map.LayersTree.onSnapshotDisplayCheckBoxItemChanged(LayersTree.java:420)
at ir.mas.aamar.map.LayersTree.onMouseReleased(LayersTree.java:204)
at ir.mas.aamar.map.LayersTree.access$0(LayersTree.java:188)
at ir.mas.aamar.map.LayersTree$1.mouseReleased(LayersTree.java:170)
at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
java.sql.SQLRecoverableException: No more data to read from socket
at oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1200)
at oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:1155)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:279)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:194)
at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:853)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1145)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1267)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1469)
at oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:389)
at ir.mas.aamar.service.map.MapService.executeJDBCQuery(MapService.java:78)
at ir.mas.aamar.service.map.MapService.getSnapshotsForThisTermPlusHoze(MapService.java:1013)
at ir.mas.aamar.dialog.edit.EditTools.refreshLayersCombo(EditTools.java:327)
at ir.mas.aamar.dialog.edit.EditTools.refresh(EditTools.java:301)
at ir.mas.aamar.dialog.edit.EditTools.<init>(EditTools.java:103)
at ir.mas.aamar.dialog.edit.EditTools.editTools(EditTools.java:62)
at ir.mas.aamar.map.MapPanel.paintComponent(MapPanel.java:7591)
at javax.swing.JComponent.paint(Unknown Source)
at javax.swing.JComponent.paintToOffscreen(Unknown Source)
at javax.swing.BufferStrategyPaintManager.paint(Unknown Source)
at javax.swing.RepaintManager.paint(Unknown Source)
at javax.swing.JComponent._paintImmediately(Unknown Source)
at javax.swing.JComponent.paintImmediately(Unknown Source)
at javax.swing.RepaintManager.paintDirtyRegions(Unknown Source)
at javax.swing.RepaintManager.paintDirtyRegions(Unknown Source)
at javax.swing.RepaintManager.seqPaintDirtyRegions(Unknown Source)
at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
java.sql.SQLRecoverableException: Closed Resultset: next
at oracle.jdbc.driver.OracleResultSetImpl.next(OracleResultSetImpl.java:224)
at ir.mas.aamar.service.map.MapService.getSnapshotsForThisTermPlusHoze(MapService.java:1014)
at ir.mas.aamar.dialog.edit.EditTools.refreshLayersCombo(EditTools.java:327)
at ir.mas.aamar.dialog.edit.EditTools.refresh(EditTools.java:301)
at ir.mas.aamar.dialog.edit.EditTools.<init>(EditTools.java:103)
at ir.mas.aamar.dialog.edit.EditTools.editTools(EditTools.java:62)
at ir.mas.aamar.map.MapPanel.paintComponent(MapPanel.java:7591)
at javax.swing.JComponent.paint(Unknown Source)
at javax.swing.JComponent.paintToOffscreen(Unknown Source)
at javax.swing.BufferStrategyPaintManager.paint(Unknown Source)
at javax.swing.RepaintManager.paint(Unknown Source)
at javax.swing.JComponent._paintImmediately(Unknown Source)
at javax.swing.JComponent.paintImmediately(Unknown Source)
at javax.swing.RepaintManager.paintDirtyRegions(Unknown Source)
at javax.swing.RepaintManager.paintDirtyRegions(Unknown Source)
at javax.swing.RepaintManager.seqPaintDirtyRegions(Unknown Source)
at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at ir.mas.aamar.dialog.edit.EditTools.setTypeOfEditModel(EditTools.java:452)
at ir.mas.aamar.dialog.edit.EditTools.<init>(EditTools.java:104)
at ir.mas.aamar.dialog.edit.EditTools.editTools(EditTools.java:62)
at ir.mas.aamar.map.MapPanel.paintComponent(MapPanel.java:7591)
at javax.swing.JComponent.paint(Unknown Source)
at javax.swing.JComponent.paintToOffscreen(Unknown Source)
at javax.swing.BufferStrategyPaintManager.paint(Unknown Source)
at javax.swing.RepaintManager.paint(Unknown Source)
at javax.swing.JComponent._paintImmediately(Unknown Source)
at javax.swing.JComponent.paintImmediately(Unknown Source)
at javax.swing.RepaintManager.paintDirtyRegions(Unknown Source)
at javax.swing.RepaintManager.paintDirtyRegions(Unknown Source)
at javax.swing.RepaintManager.seqPaintDirtyRegions(Unknown Source)
at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
I read in some forums that the problem could be caused by jdbc version incompatibility, so I just copied jdbc archives from the installed oracle 11g R2 jdbc folder but the problem persists. Last thing I should mention is that only spatial data is problemistic and non-spatial data is easily loaded.
Please Help, Thanks.Hi storm,
During the installation of oracle as you said if you have given the global password, basically this specific password will reflect to users such as
-sys
-system
-dbsnmp
-sysman
As you are new to oracle the basics that you should know is that "SYS" user is the highly privileged user in Oracle and should be logged in as "sys as sysdba" with his respective password (i.e. the global password that you have entered during database installation) to obtain his privilege. Remember to manipulate your database with caution when you are logged in as the sys user. You can log into the database using the sys user in the following way:
c\> sqlplus sys as sysdba
password: ****** --It will ask you for the password and you will have to give the global password that was given during installation
Hope this helps!!!
Regards, -
SQL Loader with date formatting
Hi,
I'm trying to get sql loader to insert a date into a column. After much browsing, reading trial and error I still get an array of errors.
I'm using oracle XE
my control file looks like this
LOAD DATA
INFILE 'posmeters/meters.csv'
INTO TABLE position_meters
FIELDS terminated by ","
ID CONSTANT '0',
POSITION_ID,
DATETIME DATE "DD/MM/YYYY HH24:MI:SS",
CASH_IN,
CASH_OUT,
NOTES_IN,
CHANGE_OUT,
WINNINGS,
VTP,
REFILL,
TOKEN_IN,
TOKEN_OUT,
ELEC_PAY,
ELEC_CREDIT,
REMOTE_PAY,
REMOTE_CREDIT,
INSERT_TS EXPRESSION "TO_CHAR(SYSDATE, 'DD/MM/YYYY HH24:MI:SS')",
FIFTY_PND,
TWENTY_PND,
TEN_PND,
FIVE_PND,
TWO_PND,
ONE_PND,
FIFTY_P,
TWENTY_P,
TEN_P,
FIVE_P
It is the DATETIME field which gives me grief. I have a test data file that looks like this
0,1010,29/09/2011 10:23:24,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24
and my table is defined as follows
ID NUMBER NOT NULL,
POSITION_ID NUMBER,
DATETIME TIMESTAMP(6) DEFAULT localTIMESTAMP NOT NULL,
CASH_IN NUMBER,
CASH_OUT NUMBER,
NOTES_IN NUMBER,
CHANGE_OUT NUMBER,
WINNINGS NUMBER,
VTP NUMBER,
REFILL NUMBER,
TOKEN_IN NUMBER DEFAULT (0) NOT NULL,
TOKEN_OUT NUMBER DEFAULT (0) NOT NULL,
ELEC_PAY NUMBER DEFAULT (0) NOT NULL,
ELEC_CREDIT NUMBER DEFAULT (0) NOT NULL,
REMOTE_PAY NUMBER DEFAULT (0) NOT NULL,
REMOTE_CREDIT NUMBER DEFAULT (0) NOT NULL,
INSERT_TS TIMESTAMP(6) DEFAULT (localtimestamp) NOT NULL,
FIFTY_PND NUMBER DEFAULT 0,
TWENTY_PND NUMBER DEFAULT 0,
TEN_PND NUMBER DEFAULT 0,
FIVE_PND NUMBER DEFAULT 0,
TWO_PND NUMBER DEFAULT 0,
ONE_PND NUMBER DEFAULT 0,
FIFTY_P NUMBER DEFAULT 0,
TWENTY_P NUMBER DEFAULT 0,
TEN_P NUMBER DEFAULT 0,
FIVE_P NUMBER DEFAULT 0
I have tried defining the control file with
DATETIME DATE "DD/MM/YYYY HH24:MI:SS",
DATETIME EXPRESSION "TO_DATE(:DATETIME, 'DD/MM/YYYY HH24:MI:SS')",
DATETIME EXPRESSION "TO_TIMESTAMP(:DATETIME, 'DD/MM/YYYY HH24:MI:SS')",
I get errors such as
Record 1: Rejected - Error on table "SITE_MAIN"."POSITION_METERS", column DATETIME.
ORA-01861: literal does not match format string
SQL*Loader-291: Invalid bind variable DATETIME in SQL string for column DATETIME.
any help would greatfully appreciated.It seems that the problem was caused by the constant at the beginning of the record and had nothing to do with date formats.
My control file now looks like this
LOAD DATA
INFILE 'posmeters/meters.csv'
APPEND INTO TABLE position_meters
FIELDS terminated by ","
POSITION_ID ,
DATETIME date "DD/MM/YYYY HH24:MI:SS",
CASH_IN ,
CASH_OUT ,
NOTES_IN ,
CHANGE_OUT ,
WINNINGS ,
VTP ,
REFILL ,
TOKEN_IN ,
TOKEN_OUT ,
ELEC_PAY ,
ELEC_CREDIT ,
REMOTE_PAY ,
REMOTE_CREDIT ,
INSERT_TS "TO_TIMESTAMP(SYSDATE, 'DD/MM/YYYY HH24:MI:SS')",
FIFTY_PND ,
TWENTY_PND ,
TEN_PND ,
FIVE_PND ,
TWO_PND ,
ONE_PND ,
FIFTY_P ,
TWENTY_P ,
TEN_P ,
FIVE_P
all is good :o) -
Oracle 11g Goldengate working in a Data Guard environment
Hey Guys, I have the following setup:
Oracle 11.2.0.4.4 running on RHEL 6.6 64-bit
3 node RAC Primary
Single-node Standby with GI (Oracle Restart)
4 DBs on Primary - AA, BB, CC and DD
4 DBs running in Active Standby - AADR, BBDR, CCDR and DDDR
Databases AA and BB replicate schemas into CC, which is a Reporting/Operational Data Store. GoldenGate 11.2.x is used for the replication
XAG used for Goldengate HA
All good here with the Primary DBs and replication humming along quite nicely.
I have questions as part of building the DR environment. How should this work? As part of the real-time apply and active standby, CCDR should keep pace with the replicated primary DB CC. Now from a role transition perspective, I need to be have the GoldenGate software installed and configured on the Standby Server for starting the processes.
Question 1: When the role transition happens, based on the data guard role, I could well have a system trigger to spawn off a shell script that starts off the goldengate processes. Would this be the correct approach?
Question 2: Do I need to worry about setting/starting the extract/replicat from a specific CSN? The checkpoint table will be kept in sync as part of the SQL apply, so would just starting the extract and replicat process on the new Primary (old DR) work?
I am unable to get any pointers on this in Metalink. Would appreciate anyone could point me to a MOS document that talks about using GG and Data Guard together.
ThanksOn the first day, there is no backup to recover. It is only on the third day's run that this command will really be successful.
The white paper does explain this.
Hemant K Chitale -
Converting Oracle query to Sql Server with date manipulation
The following SSIS statement works great in Oracle, and it parses successfully in the "Sql Task" window. In Oracle it returns
this result:
FROM_DT THRU_DT
16-Jan-2014 23-Jan-2014
select
case
when to_char(to_date(sysdate,'dd-mon-yyyy'),'dd') <=7 then to_date('24'||to_char(add_months(sysdate,-1),'mmyyyy'),'ddmmyyyy')
when to_char(to_date(sysdate,'dd-mon-yyyy'),'dd') <=15 then to_date('01'||to_char(sysdate,'mmyyyy'),'ddmmyyyy')
when to_char(to_date(sysdate,'dd-mon-yyyy'),'dd') <=23 then to_date('08'||to_char(sysdate,'mmyyyy'),'ddmmyyyy')
else to_date('16'||to_char(sysdate,'mmyyyy'),'ddmmyyyy')
end as from_dt,
case
when to_char(to_date(sysdate,'dd-mon-yyyy'),'dd') <=7 then trunc(last_day(add_months(sysdate,-1)))
when to_char(to_date(sysdate,'dd-mon-yyyy'),'dd') <=15 then to_date('07'||to_char(sysdate,'mmyyyy'),'ddmmyyyy')
when to_char(to_date(sysdate,'dd-mon-yyyy'),'dd') <=23 then to_date('15'||to_char(sysdate,'mmyyyy'),'ddmmyyyy')
else to_date('23'||to_char(sysdate,'mmyyyy'),'ddmmyyyy')
end as thru_dt
from sys.dual
How can I convert this to Sql Server ?>>You mean you get the data from Oracle and tries to insert it into SQL Server?
- no, sorry, I want to convert the syntax to Sql Server
>>Are
you running the query in OLEDB provider connected to the Oracle's database?
- yes, this works fine now (after fixing this redundancy:
to_char(to_date(sysdate,'dd-mon-yyyy'),'dd')change toto_char(sysdate,'dd') -
Populate SQL table with data from Oracle DB in ODI
Hi,
I am trying to populate a source SQL table with fields from an Oracle db in ODI. I am trying to perform this using a procedure and I am am getting the following error:
ODI-1226: Step PROC_1_Contract_Sls_Person_Lookup fails after 1 attempt(s).
ODI-1232: Procedure PROC_1_Contract_Sls_Person_Lookup execution fails.
ODI-1228: Task PROC_1_Contract_Sls_Person_Lookup (Procedure) fails on the target MICROSOFT_SQL_SERVER connection Phys_HypCMSDatamart.
Caused By: weblogic.jdbc.sqlserverbase.ddc: [FMWGEN][SQLServer JDBC Driver][SQLServer]Invalid object name 'C2C_APP.CON_V'.
My question is what is the best method to populate SQL db with data from an Oracle db? Using a procedure? A specific LKM?
I found threads referring to using an LKM to populate Oracle tables with data from a SQL table....but nothing for the opposite.
Any information would help.
thanks,
EricHi Eric,
If using an Interface, I would recommend the LKM SQL to MSSQL (BULK) knowledge module. This will unload the data from Oracle into a file, then bulk load the staging db on the target using a BULK INSERT.
Regards,
Michael Rainey -
Importing to a Oracle Table from SQL Loader Fails
Hi ,
When I try to upload one xml file from my server to my table in oracle server using sql loader it fails at times.Some times it works perfectly.
This is a daily process which automatically dumps data to my oracle.
Please find the error log :
SQL*Loader: Release 10.2.0.4.0 - Production on Thu Dec 5 04:07:32 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Control File: xmlFeedDelta.ctl
Data File: xmlFileNames_Delta.txt
Bad File: xmlFileNames_Delta.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 1000
Bind array: 50000 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table XMLFEEDDELTA, loaded from every logical record.
Insert option in effect for this table: APPEND
Column Name Position Len Term Encl Datatype
FILENAME FIRST 4000 , CHARACTER
FILECONTENT DERIVED * EOF CHARACTER
Dynamic LOBFILE. Filename in field FILENAME
value used for ROWS parameter changed from 50000 to 63
SQL*Loader-643: error executing INSERT statement for table XMLFEEDDELTA
ORA-03113: end-of-file on communication channel
SQL*Loader-2026: the load was aborted because SQL Loader cannot continue.
Table XMLFEEDDELTA:
0 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 252378 bytes(63 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 1
Total logical records rejected: 0
Total logical records discarded: 0
Run began on Thu Dec 05 04:07:32 2013
Run ended on Thu Dec 05 04:08:42 2013
Elapsed time was: 00:01:10.05
CPU time was: 00:00:00.28
My Control File Looks like this :
LOAD DATA
INFILE xmlFileNames_Delta.txt
INTO TABLE xmlFeedDelta APPEND
fields terminated by ','
filename CHAR(4000),
filecontent LOBFILE(filename) terminated by eof
My Database version :
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
"CORE 11.2.0.2.0 Production"
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
I am not sure why this is happening at times . Any help would be appreciated.Hi,
have you tried with the FILLER command like
LOAD DATA
INFILE xmlFileNames_Delta.txt
INTO TABLE xmlFeedDelta APPEND
fields terminated by ','
filename FILLER CHAR(4000),
filecontent LOBFILE(filename) terminated by eof -
SQL*Loader Sequential Data File Record Processing?
If I use the conventional path will SQL*Loader process a data file sequentially from top to bottom? I have a file comprised of header and detail records with no value found in the detail records that can be used to relate to the header records. The only option is to derive a header value via a sequence (nextval) and then populate the detail records with the same value pulled from the same sequence (currval). But for this to work SQL*Loader must process the file in the exact same sequence that the data has been written to the data file. I've read through the 11g Oracle® Database Utilities SQL*Loader sections looking for proof that this is what will happen but haven't found this information and I don't want to assume that SQL*Loader will always process the data file records sequentially.
Thank youOracle Support responded with the following statement.
"Yes, SQL*LOADER process data file from top to bottom.
This was touched in the note below:
SQL*Loader - How to Load a Single Logical Record from Physical Records which Include Linefeeds (Doc ID 160093.1)"
Jason -
How do I migrate views from MS SQL 2008 to Oracle 11g through SQL Developer
Is there any way to migrate the views from MS SQL 2008 to Oracle 11g through SQL Developer? Please give me some detail steps. Thanks for your help.
KevinHi Kevin,
user13531850 wrote:
Hi Turloch,
When I use migrate to oracle, I got a problem, the migrate tool create a new schema for me in my case (AZTECA_KSMMS), it migrates all the stuffs under that schema (AZTECA_KSMMS). However my application need the all the Oracle data under schema AZTECA instead of AZTECA_KSMMS. Is there any way to specify specific schema (AZTECA) for target oracle database? Schema remapping is available:
First Capture (separately) then during right click convert on the captured model there is a Specify the conversion options with a Object Naming tab where the schema (and other) name changes are editable.
I have not used this recently.
Also during the migration process, when I choose repository, there is a check box for truncate to reset repository to empty state, Do I need to check that truncate Check Box so the repository will be cleared from last migration?The repository can hold multple migration attempts. Check truncate to get rid of previous attempts information. This cleans up the repository - not the destination database.
There are also online database and offline database options during the migration process, what are the difference between these two choices? After I migrated to Oracle, all my views has a red cross icon next to it. Does that mean the view migration is failed or not? Please give me your comments. Thanks for your help.offline: for big (amount of data) databases with simple data types,
uses bcp + files + scripts + sqlldr.
online: for small (amount of data) databases (easier),
uses (Java) jdbc.
The view is likely to be broken - recompiling it may help.
The Oracle schema is created using a .sql file - see under generated in the directory you gave originally in the wizard. There is a .out file that contains the result of running this script including any errors. During conversion there are also likely to be warnings displayed on the UI.
There may be a single issue that is causing multiple issues - if viewa depends on functionb, and functionb is broken, viewa will also fail.
>
Kevin-Turloch
SQLDeveloper Team -
Problem using SQL Loader with ODI
Hi,
I am having problems using SQL Loader with ODI. I am trying to fill an oracle table with data from a txt file. At first I had used "File to SQL" LKM, but due to the size of the source txt file (700MB), I decided to use "File to Oracle (SQLLDR)" LKM.
The error that appears in myFile.txt.log is: "SQL*Loader-101: Invalid argument for username/password"
I think that the problem could be in the definition of the data server (Physical architecutre in topology), because I have left blank Host, user and password.
Is this the problem? What host and user should I use? With "File to SQL" works fine living this blank, but takes to much time.
Thanks in advanceI tried to use your code, but I couldn´t make it work (I don´t know Jython). I think the problem could be with the use of quotes
Here is what I wrote:
import os
retVal = os.system(r'sqlldr control=E:\Public\TXTODI\PROFITA2/Profita2Final.txt.ctl log=E:\Public\TXTODI\PROFITA2/Profita2Final.txt.log userid=MYUSER/myPassword @ mySID')
if retVal == 1 or retVal > 2:
raise 'SQLLDR failed. Please check the for details '
And the error message is:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 5, in ?
SQLLDR failed. Please check the for details
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.h.y(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source) -
I have one problem with Data Guard. My archive log files are not applied.
I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap -
How to connect from Oracle 11g to SQL Server 2008 R2
Hi,
Is it possible to connect from Oracle 11g on AIX to SQL Server 2008 R2? If so, what is the preferred method?
SQL Server has the original table. From Oracle 11g, we want to access data which is in SQL Server real time.
Thank You
SarayuHi,
Have a look at these Oracle notes for the full information on the gateways -
Master Note for Oracle Gateway Products (Doc ID 1083703.1)
Functional Differences Between DG4ODBC and Specific Database Gateways (Doc ID 252364.1)
Gateway and Generic Connectivity Licensing Considerations (Doc ID 232482.1)
How to Setup DG4MSQL (Oracle Database Gateway for MS SQL Server) 64bit Unix OS (Linux, Solaris, AIX,HP-UX) (Doc ID 562509.1)
How to Configure DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX Itanium) to Connect to Non-Oracle Databases Post Install (Doc ID 561033.1)
The Database Gateway for SQL*Server (DG4MSQL) needs a separate license but the Database Gateway for ODBC (DG4ODBC) is included in your RDBMS license. You only need to provide the third party ODBC driver needed by DG4ODBC.
Regards,
Mike -
Oracle 11i(11.5.0.2) Data guard setup
Hi,
Hi, I am currently doing a test for 11i(with10.2.0.3 db) with Data guard. Since I have only one test server. I have created the Primary,Standby and the application Tier on one server. After switching over to the standby and trying to run autconfig on the application tier, it fails with TNS-entry not found. I would like to know that if its mandatory that the Primary and Standby db should have the same listener port or not.
ThanksHi,
Hi, I am currently doing a test for 11i(with10.2.0.3 db) with Data guard. Since I have only one test server. I have created the Primary,Standby and the application Tier on one server. After switching over to the standby and trying to run autconfig on the application tier, it fails with TNS-entry not found. I would like to know that if its mandatory that the Primary and Standby db should have the same listener port or not. Yes u need to have same sid and port number as of prod.
Refer MOS tech note:
*Business Continuity for Oracle Applications Release 11i, Database Releases 9i and 10g [ID 216212.1]*
thanks,
X A H E E R -
How to use SQL loader with DBF fixed format record
Hi everybody!
My situation is that: I want to use SQL loader with Foxpro DBF format, it similar to case 2 study (Fixed format record) but DBF file has header, how can I tell SQL loader skip header.
Thank you in advanceAnother option is to apply SQL operators to fields
LOAD DATA
INFILE *
APPEND
INTO TABLE emp
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' (
empno,
ename,
job,
mgr,
hiredate DATE(20) "DD-Month-YYYY",
sal,
comm,
deptno CHAR TERMINATED BY ':',
projno,
loadseq "my_seq.nextval")This is a modified control file of Case Study 3 which originally demonstrated the use of the Sequence parameter -
Implemeting 11gR2 RAC with Data Guard
Hi ,
Could any one provide the steps on how to setup 11gR2 two node RAC With Dataguard . Could the 11R2 Active database duplication can be used in setting up the standby ?
I just need the order of steps to be followed to set up the environment.
Thanks,
shashi.Hi Fiedi ,
Thanks for the reply .
I know how to build the oracle dataguard . But , I'm looking for the order of steps that I need to follow to build 11gR2 RAC with data guard.
1] Set up the Grid Infrsatructure for the 2 node RAC .
2] Create the database .
3] Modify the init.ora prameter to chage the above created database as primary .
4] Set up the grid infrastructure for the 2 node RAC on the DR site.
5] Create the standby database using 11gR2 active database dupication.
Is the above order correct ? If not , let me know the correct order of steps that needs to be followed to setup 11gR2 RAC with dataguard.
Maybe you are looking for
-
Not able to generate report in AVDF 12.1
Dear DBA's, I installed 12.1 database vault server on Linux and created agent on 11.2.0.1 on solaris. The host status is showing running. In Security Target > Monitoring > Audit Trail in this menu the collection status is showing stopped and i clicke
-
Using MB mostly w/ power adapter, how do I maintain battery?
I use my MB at work plugged in with battery,and of course, once in a while take my MB for a trot, and like to make sure it is ready for normal use with a charged battery, however , I am concerned that running my MB w/battery with power adapter plugge
-
Sound books only in danish but i´m from sweden...
Hello I´m from Sweden and want to buy the book "Brobyggarna" by Jan Guillou but the only results for my search is in danish (Jan Guillou is a Swedish author) why? seems kind of strange dosen´t it? Please help me if you can
-
VDI3.0/SRS4.1 Soalris can detect printer forworded form Sun Ray DTU
Dear all , i need some help on the blow please: environment brief: i have VM cluster of 8 Servers sun blade 6240 , over this pool of servers there is Virtually 4 VDI 3.0/SRS4.1 servers and pool of windows XP virtual machines , and around 70 Sun Ray 2
-
Unable to print album artwork, though it is in iTunes
Hello, I have iTunes 8.0.2. I purchased an album from the iTunes store, removing it immediately from the 'Purchased' list for reasons I won't bore you with. I burned a CD and then went to print the artwork, to find that it came up blank in the previe