Oracle 11g on RHEL4 ...

Hi,
I have the errors
it asked for parameter file initORCL.ora
since not available copied init.ora to initORCL.ora
sqlplus '/as sysdba';
idle instance started
ORA-00205: error in identifying control file, check alert log for more info my alertlog detaills
tried to create pfile from spfile it says
ORA-01565: error in identifying file '?dbs/[email protected]'
ora-27037 unable to obtain file status
Linux error2: no such file or directory
Is it that my environmental settings are wrong???
ORACLE_BASE=/home/oracle/apps/oracle
ORACLE_HOME=/home/oracle/apps/oracle/product/11.1.0/*db_2*
LD_LIBRARY_PATH=$ORACLE_HOME/lib
PATH=$PATH:$ORACLE_HOME/bin
11.1.0.6
rhel4
Thanks,
Sai

If you just installed the database then
1. Drop the database using DBCA
2. Create a new database using DBCA
3. Set profile properly for oracle.
Regards
Asif Kabir
-- If helps mark your helpful post as correct / helpful and close the thread

Similar Messages

Oracle 11g install problem on rhel 4.4

i was trying to install oracle 11g to rhel 4.4
during the install process , there are two warning when runing environment check
one is kernal parameter
i set four kernal parameter like this:
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
but oracle warning me they should be set as 419430
the other is swap space :
i set 2G,but oracle needs 4G.
i neglect them and continue
but when the install proceed 11percent , it stoped there and the i pose the install log is :
INFO: Method 'dispose()' Not implemented in class 'CustomConfigurationOptions'
INFO: config-context initialized
INFO: *** Install Page***
INFO: FastCopy : File Version is Compatible
INFO: Install mode is fastcopy mode for component 'oracle.server' with Install type 'Custom'.
INFO: Link phase has been specified as needed
INFO: Setup phase has been specified as needed
INFO: HomeSetup JRE files in Scratch :0
INFO: Setting variable 'ROOTSH_LOCATION' to '/home/oracle/ora11/DB10g/root.sh'. Received the value from a code block.
INFO: Setting variable 'ROOTSH_LOCATION' to '/home/oracle/ora11/DB10g/root.sh'. Received the value from a code block.
INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_exp_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_dirs.lst'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_filemap.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
INFO: Number of threads for fast copy :1
INFO: FastCopy : The component info is ignored :oracle.network.cman:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.precomp.lang:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.odbc:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.rdbms.dv:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.rdbms.lbac:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.rdbms.dv.oc4j:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.odbc.ic:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.sysman.ccr:10.2.6.0.0
i do not know how to make it work ,please help me
thank you!

This is the output from my current 11g installation on an OEL4:
Checking operating system package requirements ...
Checking for make-3.80; found make-1:3.80-6.EL4-i386. Passed
Checking for binutils-2.15.92.0.2; found binutils-2.15.92.0.2-21-i386. Passed
Checking for gcc-3.4.5; found gcc-3.4.6-3.1-i386. Passed
Checking for libaio-0.3.105; found libaio-0.3.105-2-i386. Passed
Checking for libaio-devel-0.3.105; found libaio-devel-0.3.105-2-i386. Passed
Checking for libstdc++-3.4.5; found libstdc++-3.4.6-3.1-i386. Passed
Checking for elfutils-libelf-devel-0.97; found elfutils-libelf-devel-0.97.1-3-i386. Passed
Checking for sysstat-5.0.5; found sysstat-5.0.5-11.rhel4-i386. Passed
Checking for libgcc-3.4.5; found libgcc-3.4.6-3.1-i386. Passed
Checking for libstdc++-devel-3.4.5; found libstdc++-devel-3.4.6-3.1-i386. Passed
Checking for unixODBC-2.2.11; found unixODBC-2.2.11-1.RHEL4.1-i386. Passed
Checking for unixODBC-devel-2.2.11; found unixODBC-devel-2.2.11-1.RHEL4.1-i386.
~ Madrid

HELP! Oracle 11g installation error

OS: RHEL4
Oracle 11g
During the install step an error dialog showed up when "Linking Oracle Net Required Support files 11.1.0.6.0......" The information it prompted is:
Error in invoking target 'ntcontab.o' of makefile '/home/oracle/11g/network/lib/ins_net_client.mk'. See '/home/oraInventory/logs/installActions2007-08-21_03-17-58AM.log' for details.
The log file mentioned above tell me that:
INFO: (if [ "compile" = "compile" ] ; then \
/home/oracle/11g/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /home/oracle/11g/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/11g/lib/ ;\
INFO: /usr/bin/ar rv /home/oracle/11g/lib/libn11.a /home/oracle/11g/lib/ntcontab.o ; fi)
INFO: cc1: unrecognized option `-auxbase'
cc1: output filename specified twice
INFO: mv:
INFO: cannot stat `ntcontab.o'
INFO: : No such file or directory
INFO:
INFO: /usr/bin/ar: /home/oracle/11g/lib/ntcontab.o: No such file or directory
INFO: make:
INFO: *** [ntcontab.o] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/home/oracle/11g/network/lib/ins_net_client.mk'. See '/home/oraInventory/logs/installActions2007-08-21_03-17-58AM.log' for details.
Exception Severity: 1
If i ignore this, the same error will appear about other *.o target.
What could i do now? I am eager for the help.

That's right this is not related to the above problem, so the gcc issue could be considered as solved. Oracle 11g requires you to have about 1.5 the amount of RAM, if your swap is not configured to meet this requirement, then you should manually configure additional swap space. This should not prevent the process from continuing as long as you check the User Verified box. You can continue and if you notice an increase in the swap space consumption at execution time, then increase the swap area by using swap file space as this example illustrates:
How to create a swapFile
Short on memory? Under 128MB is. Then build a swap file.
Go to Start > Run > Rxvt
Type, then press Enter:
dd if=/dev/zero of=/mnt/home/puppy.swp bs=1024 count=800k
Be patient. This will take several minutes.
That 800k translates to 800MB (819,200KB).
So decrease according to available disk space.
Type, then press Enter:
mkswap /mnt/home/puppy.swp
Type, then press Enter:
swapon /mnt/home/puppy.swp
Go to Start > File Managers > uXplor
Drill down to /root/.etc/rc.d/rc.local and right-click and select edit.
Add this line to the bottom:
swapon /mnt/home/puppy.swp
Save the file. This will turn on the swap file upon next boot.
~ Madrid

Archivelogs filling up the disk space - Oracle 11g

Oracle Database 11g on RHEL4
This morning the Archivelogs were filling up the disk space at a very high rate (1.3G in 5 Mins). For now it has stopped. Please assist!
dallinux161 oraedw ccedw > ls -ltr
total 1373164
-rw-r----- 1 oraedw oinstall 48893440 Mar 27 08:37 o1_mf_1_4300_4wss5yhx_.arc
-rw-r----- 1 oraedw oinstall 48605184 Mar 27 08:38 o1_mf_1_4301_4wss6my1_.arc
-rw-r----- 1 oraedw oinstall 49446400 Mar 27 08:38 o1_mf_1_4302_4wss75hn_.arc
-rw-r----- 1 oraedw oinstall 48287232 Mar 27 08:38 o1_mf_1_4303_4wss7m8k_.arc
-rw-r----- 1 oraedw oinstall 49149952 Mar 27 08:39 o1_mf_1_4304_4wss8b53_.arc
-rw-r----- 1 oraedw oinstall 49004032 Mar 27 08:39 o1_mf_1_4305_4wss8ylc_.arc
-rw-r----- 1 oraedw oinstall 49296896 Mar 27 08:39 o1_mf_1_4306_4wss9p47_.arc
-rw-r----- 1 oraedw oinstall 48710144 Mar 27 08:40 o1_mf_1_4307_4wssbb54_.arc
-rw-r----- 1 oraedw oinstall 47826944 Mar 27 08:40 o1_mf_1_4308_4wssbwq7_.arc
-rw-r----- 1 oraedw oinstall 47920128 Mar 27 08:40 o1_mf_1_4309_4wssc4l5_.arc
-rw-r----- 1 oraedw oinstall 47898112 Mar 27 08:40 o1_mf_1_4310_4wssccrl_.arc
-rw-r----- 1 oraedw oinstall 47805440 Mar 27 08:40 o1_mf_1_4311_4wssck9v_.arc
-rw-r----- 1 oraedw oinstall 47805440 Mar 27 08:40 o1_mf_1_4312_4wsscqbs_.arc
-rw-r----- 1 oraedw oinstall 48220672 Mar 27 08:41 o1_mf_1_4313_4wssd0xl_.arc
-rw-r----- 1 oraedw oinstall 48555008 Mar 27 08:41 o1_mf_1_4314_4wssd7f9_.arc
-rw-r----- 1 oraedw oinstall 48971776 Mar 27 08:41 o1_mf_1_4315_4wssdghz_.arc
-rw-r----- 1 oraedw oinstall 48506880 Mar 27 08:41 o1_mf_1_4316_4wssdo87_.arc
-rw-r----- 1 oraedw oinstall 47821824 Mar 27 08:41 o1_mf_1_4317_4wssdvg3_.arc
-rw-r----- 1 oraedw oinstall 47821824 Mar 27 08:41 o1_mf_1_4318_4wssf1wx_.arc
-rw-r----- 1 oraedw oinstall 47805440 Mar 27 08:41 o1_mf_1_4319_4wssf8g3_.arc
-rw-r----- 1 oraedw oinstall 47804416 Mar 27 08:41 o1_mf_1_4320_4wssfgf8_.arc
-rw-r----- 1 oraedw oinstall 49128960 Mar 27 08:41 o1_mf_1_4321_4wssfn29_.arc
-rw-r----- 1 oraedw oinstall 49092096 Mar 27 08:42 o1_mf_1_4322_4wssft4f_.arc
-rw-r----- 1 oraedw oinstall 49487360 Mar 27 08:42 o1_mf_1_4323_4wssg0nb_.arc
-rw-r----- 1 oraedw oinstall 48568320 Mar 27 08:42 o1_mf_1_4324_4wssg7h7_.arc
-rw-r----- 1 oraedw oinstall 47837696 Mar 27 08:42 o1_mf_1_4325_4wssgg1x_.arc
-rw-r----- 1 oraedw oinstall 48565248 Mar 27 08:42 o1_mf_1_4326_4wssgnhw_.arc
-rw-r----- 1 oraedw oinstall 47838720 Mar 27 08:42 o1_mf_1_4327_4wssgttg_.arc
-rw-r----- 1 oraedw oinstall 47844864 Mar 27 08:42 o1_mf_1_4328_4wssh107_.arc
dallinux161 oraedw ccedw > du -sh
1.3G .

Anand... wrote:
Hi..
1. Check what is going on in the database.Seems like some huge dml process are going on.
2. You can increase the redo logfile size.Currently its around 48MB, incresae it to 100MB.While he probably should increase his redo log size, that will have zero impact on the amount of disk space consumed by the archivelog files. If the OP is generating 1gb/min of redo, he will consume 1gb/min of disk space for archivelogs. It may be with 1 ea. 4gb file every 4 minutes or 1 ea. 256mb files every 15 seconds, but it still comes out the same in the end. Redo file size influences how often a log switch occurs and the size of the individual archivelog files, but it has no bearing on the amount of redo that has to be archived over a given period.
>
Anand

Permission denied :Oracle 10g on RHEL4

I am using ubuntu 10.10 and Virtualbox installed on it.I have installed red hat (RHEL4) on virtualbox.When i try to run the oracle installer from the cdrom i get the following error "permission denied".I am have tried to edit fstab entry in /etc but it didnt worked.I am only getting a read permission and unable to chmod it.

Automount does not mount cd/dvd rom media with execute privileges.
If you prefer a permanent solution, you can try the following:
Find the following line in /etc/auto.misc:
cd -fstype=iso9660,ro,nosuid,nodev :/dev/cdrom
and add exec so it look like:
cd -fstype=iso9660,ro,nosuid,nodev,exec :/dev/cdromI usually add the Oracle to root sudoers (visudo command), at least for the duration of the install. Then simply do:
- Insert DVD or mount iso in Virtualbox
- Oracle User: sudo umount /dev/cdrom
- Oracle User: sudo mount /dev/cdrom /media
If you see "runinstaller" instead of "runInstaller" you may have some hybrid dvd and you can try the following:
sudo mount -o loop,norock /dev/cdrom /media
Btw: Installing Oracle 11g R2 on Ubuntu 10 Howto:
Installing Oracle 11g R2 on Ubuntu 10 Howto

Slow connection to oracle 11g R2 database if no Internet connection

Hi all,
I've read some similar topics, but could not find a solution for my problem. I'm running Windows 7 Enterprise with a VMWare (Player) with a virtual Linux image on my machine (centos 5.4) in NAT connection mode. On the virtual machine I have installed an Oracle 11g R2 database. As long as I'm connected to Wi-FI or I'm plugged into my LAN network, I can access the database and run applications without a problem. But if I don't have an Internet connection, it's almost impossible to connect to the database or use certain applications.
Thanks in advance for your help !
Gianni
Below the settings on my virtual machine:
TNSNAMES.ora
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dmserver)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
LISTENER.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = dmserver)(PORT = 1521))
ADR_BASE_LISTENER = /usr/local/software/oracle
I also have a local loopback adaptor installed (below some info from my ifconfig):
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:9396 errors:0 dropped:0 overruns:0 frame:0
TX packets:9396 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3047584 (2.9 MiB) TX bytes:3047584 (2.9 MiB)
Edited by: 939190 on Jun 7, 2012 2:04 AM

Solved it by commenting out my nameserver in resolv.conf and adding my hostname explicitely to the etc/hosts file in Linux. A good thread on this is: Oracle connection extremely slow(Oracle 11G on Linux RHEL4)

Error while creating a JDBC connection to Oracle 11g using WLS 6.1

Hi
I am trying to connect to Oracle 11g database on Weblogic 6.1 server.
First of all i would like to know if this is compatible?
The environement that i have is this
1. JDK 1.3
2. Database 11g is on remote system
3. Oracle client on my local system ( Connecting to the 11g DB through the client works fine)
4. Weblogic server 6.1
5. Currently the application is connected to Oracle 10g DB and working fine(We are attempting to move it to 11g)
Below are the steps that i followed to create the connection:
1. Made an entry for the datasource in config.xml under <WLS_DOMAIN>/config folder as below
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
MaxCapacity="4" Name="CADConnectionPool"
Properties="user=abc_proxy;password=proxy_abc;dll=ocijdbc8;protocol=thin"
RefreshMinutes="5" ShrinkPeriodMinutes="10" Targets="CAsvr"
TestConnectionsOnRelease="true" TestConnectionsOnReserve="true"
TestTableName="dual" URL="jdbc:oracle:thin:@gen11t-ora.db.lab.xyz.com:1530:GEN11T"/>
2. Restarted the server.
3. Ran the application and get the following error on the server console:
<Aug 22, 2011 12:39:42 AM CDT> <Error> <JDBC> <Cannot startup connection pool "C
ADConnectionPool" weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.lang.ArrayIndexOutOfBoundsException
at oracle.security.o3logon.C0.r(C0)
at oracle.security.o3logon.C0.l(C0)
at oracle.security.o3logon.C1.c(C1)
at oracle.security.o3logon.O3LoginClientHelper.getEPasswd(O3LoginClientH
elper)
at oracle.jdbc.ttc7.O3log.<init>(O3log.java:289)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java:251)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:246)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:365)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:193)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:705)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:650)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:360)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:285)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:239)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:199)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy31.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2977)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:372)
at weblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy42.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub
.start(ApplicationManagerMBean_CachingStub.java:480)
at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
at weblogic.management.Admin.finish(Admin.java:644)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:209)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:705)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:650)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:360)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:285)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:239)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:199)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy31.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2977)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:372)
at weblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy42.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub
.start(ApplicationManagerMBean_CachingStub.java:480)
at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
at weblogic.management.Admin.finish(Admin.java:644)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
Can't load scjd12.dll, file not found java.library.path=C:\jdk1.3.1_11\bin;.;C:\WINDOWS\system32;C:\WINDOWS;.\bin;C:\P
rogram Files\Lotus\Notes\Data;C:\Program Files\Lotus\Notes;C:\Program Files\Java
\jre1.5.0_17\bin;C:\Program Files\Java\j2re1.4.2_06\bin;C:\Oracle\bin;C:\Program
Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\sys
tem32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\nls;C:\WINDOWS\sys
tem32\nls\ENGLISH;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Rational
\common;C:\Program Files\Rational\ClearCase\bin;C:\apache-ant-1.6.5\bin;C:\jdk1.
3.1_11\bin;C:\Program Files\Citrix\ICAService\;C:\Program Files\Citrix\System32\
;Z:.
<Aug 22, 2011 12:38:06 AM CDT> <Info> <JDBC> <Sleeping in createResource()>
<Aug 22, 2011 12:38:07 AM CDT> <Error> <JDBC> <Cannot startup connection pool "c
ispool" weblogic.common.ResourceException:
Could not load 'com.neon.jdbc.Driver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:212)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:134)
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllo
cator.java:705)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.j
ava:282)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:650)
at weblogic.jdbc.common.JDBCService.addDeployment(JDBCService.java:107)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:360)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:285)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:239)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:199)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy31.updateDeployments(Unknown Source)
at weblogic.management.configuration.ServerMBean_CachingStub.updateDeplo
yments(ServerMBean_CachingStub.java:2977)
at weblogic.management.mbeans.custom.ApplicationManager.startConfigManag
er(ApplicationManager.java:372)
at weblogic.management.mbeans.custom.ApplicationManager.start(Applicatio
nManager.java:160)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:360)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
57)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
25)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy42.start(Unknown Source)
at weblogic.management.configuration.ApplicationManagerMBean_CachingStub
.start(ApplicationManagerMBean_CachingStub.java:480)
at weblogic.management.Admin.startApplicationManager(Admin.java:1234)
at weblogic.management.Admin.finish(Admin.java:644)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:524)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:207)
at weblogic.Server.main(Server.java:35)
Would like some help on this asap as the project is in critical stage.
Thanks

The driver being used by your weblogic is too old and incompatible with the DBMS. Upgrade the driver.

Oracle 11g Quartz Scheduler 1.8.5 running under JBOSS 5.1

Basically I'm getting this error when running Quartz configured for the jobStore
org.quartz.jobStore.class = org.quartz.impl.jdbcjobstore.JobStoreCMT
I've got two data sources setup.
One data source is setup to be looked up via JNDI (presumably for the one that may participate in distributed JTA XA transactions) and one that
supposedly is not to participate in JTA transactions in which quartz can call commit/rollback on it's own.
The problem I'm seeing with the interaction of the two is the following exception:
05:21:27,292 ERROR [TxPolicy] javax.ejb.EJBTransactionRolledbackException: SqlMapClient operation; uncategorized SQLException for SQL []; SQL state [9
9999]; error code [29875];
--- The error occurred in XXXXX_COORDINATE_SqlMap.xml.
--- The error occurred while applying a parameter map.
--- Check the XXXX_COORDINATE.insert-InlineParameterMap.
--- Check the statement (update failed).
--- Cause: java.sql.SQLException: ORA-29875: failed in the execution of the ODCIINDEXINSERT routine
ORA-29400: data cartridge error
ORA-14450: attempt to access a transactional temp table already in use
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 720
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 225
; nested exception is com.XXXXXibatis.common.jdbc.exception.NestedSQLException:
--- The error occurred in XXXXX_COORDINATE_SqlMap.xml.
--- The error occurred while applying a parameter map.
--- Check the XXXXX_COORDINATE.insert-InlineParameterMap.
--- Check the statement (update failed).
--- Cause: java.sql.SQLException: ORA-29875: failed in the execution of the ODCIINDEXINSERT routine
ORA-29400: data cartridge error
ORA-14450: attempt to access a transactional temp table already in use
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 720
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 225
Has anyone seen this error before with the following configuration of Quartz 1.8.5, Oracle 11g, Oracle Spatial?
I've googled and seen reference to Oracle spatial using temp tables and not compatible with transactions... but not sure
exactly how to solve this problem.
Thanks in advacce.

Hi;
Can any one advise me where and how can I download proper RPM packages and how do I resolve swap space requirement failure as mentioned above. Please let me know if further information required.You can find all related rpm from your DVD. For rpm please see below thread:
RPM confirmation
Re: Package install for oracle11gr2
For swap:
swap size increase-linux
How to increase swap size?
Regard
Helios

Oracle 11g Installation problems

Hi there, Im a new Oracle's user, and I am trying to install Oracle 11g in my computer I have Windows Vista SP2 32bits, but I have a lot of problems.
The program send me various messages of Warnings and Errors so I couldnt finished the complete instalation and configuration.
Somebody can help me with some of this errors.
This are the errors: (In Spanish)
ORA-31011: Fallo en el analisis de XML
ORA-19202: Se ha producido un error en el procesamiento
ORA-06512: en "SYS.XMLTYPE", linea 272
ORA-06512: en "XDB.XDB_CONFIGURATION", linea 69
ORA-06512: en "XDB.DBMX_XDB", linea 209
ORA-06512: en "XDB.XDB_CONFIGURATION", linea 92
La configuración de Enterprise Manager ha fallado debido al
siguiente error:
Error al iniciar Database Control
Consulte el archivo log en C:\oraclecfgtoollogsdbca\orc\emConfig.log para obtener mas información
Posteriormente, puede reintentar la configuración de esta base de datos con
Enterprise Manager ejecutando manualmente el archivo de comandos C:\oracle\product\11.1.0\db_1\bin\emca
nstaller ha instalado productos en el grupo de componentes "Oracle Windows Interfaces".
Para soportar un desarrollo perfecto en Microsoft Visual Studio con la base de datos Oracle,
Oracle recomienda descargar e instalar la última versión de
"Oracle Developer Tools for Visual Studio .NET" de Oracle Technology Network.
I will aprecciatte your help.
Thank you!

user12191943 wrote:
I have Windows Vista SP2 32bitsPlease specifiy WHICH edition of Vista. Oracle does have many problems with Vista Home.

Oracle 11g ASM installation on HP UX 11.31 Risc

Hi All,
I am planning to install Oracle 11g ASM on HP UX 11.31 Risc machine. Is it possible to configure ASM without using RAW devices. If yes what is the procedure.
Thanks,

I am planning to install Oracle 11g ASM on HP UX 11.31 Risc machine. Is it possible to configure ASM without using RAW devices. If yes what is the procedure.AFAIK, it is not possible.

Installing Oracle 11g on Ubuntu 8.04

Hello,
I am having a sleepless night trying to install Oracle 11g express on Ubuntu 8.04.
There is no server. I am actually trying to install on the exact box i am using.
I got this error again and again. Any pro and experts please help:
Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
127.0.0.1:0.0
127.0.0.1:0.0
=======================
oracle@sithkong-desktop:~/database$ DISPLAY=127.0.0.1:0.0
oracle@sithkong-desktop:~/database$ export DISPLAY
oracle@sithkong-desktop:~/database$ xclock
No protocol specified
Error: Can't open display: 127.0.0.1:0.0
oracle@sithkong-desktop:~/database$ ./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 10751 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1915 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-08-29_10-22-59PM. Please wait ...oracle@sithkong-desktop:~/database$ Oracle Universal Installer, Version 11.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
No protocol specified
Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
127.0.0.1:0.0
127.0.0.1:0.0
OUI-10025:Unable to start an interactive install session because of the following error:Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable. The DISPLAY environment variable should be set to <hostname or IP address>:<screen>, where the <screen> is usually '0.0'.
OUI-10026:Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:      $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
     echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
     echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
OUI-10027:To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
     % <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'

http://www.pythian.com/news/968/installing-oracle-11g-on-ubuntu-804-lts-hardy-heron
HTH...

Installer problem - Oracle 11g on Redhat ES 5.1 (x86)

Hi,
I'm trying to run the "runInstaller" script to install Oracle 11g onto my Redhat ES 5.1 (x86) machine and the following error is being reported:
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 1409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1407 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-01-10_04-46-50AM. Please wait ...Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ewt/lwAWT/BufferedFrame
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
I copied all the installation tree to /tmp/oracle and ran chmod -R 777 * to make sure I could see all the files.
I've been logging onto the server as the oracle user.
I've also got Java v1.5.0.6 installed
I've run out of ideas - anyone able to assist ?

I've sorted it. Was originally copy unzipped install files from DVD into /tmp but think there must have been some corruption. I now copied and unzipped the install file onto the RH machine and it's now working.

Installing Oracle 11g R2 on RHEL 5.9 server

Hi,
    I've been trying to install Oracle 11g R2 on a Red Hat Enterprise Linux 5.9 server but have not succeeded thus far. The server meets all the software and hardware requirements for Oracle 11g Release 2 and when it also has all the prerequisite packages/ RPM's on it, when checked manually. I have set up the various kernel, semaphore and local port range parameters in accordance with the Oracle guides for installing Oracle on RHEL 5. I also followed the online guides to create the "oracle" user and set up the groups (oinstall, dba, oper and asm).
    However, when I run the installer, it shows "Failed" for all the prerequisite checks. I tried to ignore this and install Oracle but it failed at 37% and gave multiple errors, related to invoking target 'XYZ' of different files including makefile and gcc.
     I suspect that either the installer is unable to detect these packages as they already exist on our server or it is something to do around permissions to the groups. I read on these forums that it might be because of a "cvu" folder created inside /tmp that requires '777' permission but am not sure if that's what's causing our installation to fail.
     Please let me know how to proceed with the installation and guide me through this.
Thanks.

Hi, its Oracle 11g R2 - 2.0.3.6 .
The O.S is Linux x86_64
server: RHEL 5.9 (Takinga) with kernel: 2.6.18
I've been working on this all day today and have managed to overcome the errors regarding the missing/ failed packages. I've also verified that my kernel parameters are correct; I had missed the kernel shmmni parameter yesterday.
The installer now detects all the packages & runs till 86% when it gives the error: "error invoking target client_sharedlib of makefile".
Kindly let me know how to proceed. Thanks in advance !

Problem when installing Oracle 11g R2 x64 on rhel 5.8 x86_64

Hi All,
I’m trying to install oracle 11g software only to upgrade my database from 10g to 11g and i install all required packages listed in installation prerequisites but the below error appeared
error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile
$tail -15 $ORACLE_HOME/install/make.log
/oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk:52: warning: ignoring old commands for target `nmosudo' make -f /oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk relink_exe EXENAME=nmo make[1]: Entering directory `/oradata/db/tech_st/11.2.0/sysman/lib' /oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk:113: warning: overriding commands for target `nmosudo' /oradata/db/tech_st/11.2.0/sysman/lib/ins_emagent.mk:52: warning: ignoring old commands for target `nmosudo' gcc -o /oradata/db/tech_st/11.2.0/sysman/lib/nmo -L/oradata/db/tech_st/11.2.0/lib/ -L/oradata/db/tech_st/11.2.0/sysman/lib/ `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -lm `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -ldl -lm -L/oradata/db/tech_st/11.2.0/lib /oradata/db/tech_st/11.2.0/sysman/lib/s0nmo.o /oradata/db/tech_st/11.2.0/sysman/lib/libnmo.a -lcrypt -ldl `cat /oradata/db/tech_st/11.2.0/lib/sysliblist` -ldl -lm /bin/sh: cat: command not found /bin/sh: cat: command not found /bin/sh: cat: command not found /oradata/db/tech_st/11.2.0/sysman/lib/s0nmo.o: In function `main': s0nmo.c:(.text+0x1b): undefined reference to `__intel_new_proc_init' make[1]: Leaving directory `/oradata/db/tech_st/11.2.0/sysman/lib' collect2: ld returned 1 exit status make[1]: *** [/oradata/db/tech_st/11.2.0/sysman/lib/nmo] Error 1 make: *** [nmo] Error 2 EBS :12.0.4
Please help me in this issue. Thanks in advance

Seems you are trying to Install 32-bit 11g R2 on Linux RHEL 5 (64-bit) server fails with relinking errors - 'Mkldflags ntcontab.o nnfgt.o'
Please check following MOS Notes.
Install/Clone 32-bit 11GR2 Client On Linux x86_64 Fails With Error In Invoking Target 'Mkldflags ntcontab.o nnfgt.o' Of Makefile ins_net_client.mk (Doc ID 1473421.1)

Installation of Oracle 11g on RHEL 5 (Listener cannot start )

Hello,
I have install Oracle 11g on my linux RHEL5. The installation was succesfull but cannot start the listener. The configuration of even the EM at the end of the installation for the same reason , Listener not started.
Trying to connect to my Listener i got the following error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=karen)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCPS)(HOST=karen)(PORT=2484)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
LSNRCTL> start
Starting /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNS-12537: TNS:connection closed
TNS-12560: TNS:protocol adapter error
TNS-00507: Connection closed
Linux Error: 29: Illegal seek
Can Some help troubleshoot this problem.
Thanks

Dear bezgodo!
Please execute the following commands and compare the results.
1.
hostname --fqdn2.
nslookup <your_ip_address>In both cases you should see the fully qualified hostname of your server.
Yours sincerely
Florian W.

Oracle 11g on RHEL4 ...

Similar Messages

Maybe you are looking for