Oracle 9.2.0.1 DB solaris 8 To Oracle 10.2.0.5 AIX 6.1
Dear All,
My Oracle 9201 database on sun 5.8 migration to 10.2.0.5 on AIX 6.1
Step 1
Source on Oracle 9201 database on sun 5.8 I exported the database
exp system/**** FULL=y FILE=exp_full.dmp STATISTICS=NONE LOG=exp_full.log
Q1 Is this command is correct or do i need to add any other parameters ?
Step 2
Target on AIX 6.1
1) Installer 10g patch set etc and created the database using dbca
2) Created all the tables spaces same as Source database
Q1
To Import the database using this command or do i need to some
imp system/***** FULL=y FILE=exp_full.dmp LOG=imp_full.log IGNORE=y
Do I need to create all the users and or What else i need do before i need to run imp
Pls List of the things which i need to create before i run imp
Best Regards
Before importing data to new server you need to take care of following point.
1. Create all the tablespace present as on production database on the new database server and size should be 10-15% more as on production
2.create all the user present on production on the new database with their default tablespace.
3. grant all the privilages to the user as on production on the new database.
4. Then import the data using following command
imp user/password file=file.dmp log=logfile.log full=y feedback=1000
Similar Messages
-
Oracle's recommended Swap Size for Solaris 10 Oracle 11gR2 (11.2.0.2)
I have a solaris server with 16gb of RAM that will subsequently be zoned into three zones to support three separate database instances, one for each zone. Given that physically there is only 16Gb of ram, It is my understanding and experience that I should have 1.5-2 * 4Gb should be at least 6Gb of SWAP per Local Zone.
Please advise. Thanksyakub21 wrote:
I have a solaris server with 16gb of RAM that will subsequently be zoned into three zones to support three separate database instances, one for each zone. Given that physically there is only 16Gb of ram, It is my understanding and experience that I should have 1.5-2 * 4Gb should be at least 6Gb of SWAP per Local Zone.
Please advise. ThanksI'd look at it like this .....
Your Phyiscal Memory will be used somewhat as follows:-
- Lets say 1GB for the OS ...
- 1.5GB for zfs arc cahce if your useing ZFS.
- The sum of your PGAs and SGA's should fit within the remainder of ram.
- And your may want a little more to be sure and for other things; monitroting software agents, em etc.
In order that you can use more virtual memoy than you have physical memory for your will porably want to add a swap file, and for a 16GB machine this would probably be 4 / 8 or perhaps up to 16GB depending if would will occasionally have higher virutal memory demands or if poeple but big files in /tmp. In general swap -s can be used to monitor a shortage, though it can foolled if zfs_arc_cache is not limited.
The situation for zones not different unless you are using zone.max-swap and the physical capped memory.
If you have zone with a physical capped memory of 5GB, and a zone.max-swap of 8GB with is af the zone has a swapfile of 3GB; and you have to make sure:
- The global zone is able to give that amount of memory to the non-global zone.
- The global zone can provider the zone.max.swap from its virutal memory.
- That the sga+pga and /tmp usage and other will fit in zone.max-swap ... use swap -s in the zone to monitor. -
SAP 4.7 Installation problem on Solaris 10 - Oracle 9.2.0.7
Hi,
I am trying to install SAP 4.7 on Solaris 10 - Oracle 9.2.0.7. I am using standar installation DVD for SAP 4.7 SR1. After installation I want to login SAP system I have an error about database inconsistency. System said that enter SICK transaction. I entered SICK and my error is "OS release SunOS 5.10 Generic_141444-09 sun4u is not support with this kernel". After I received this error I installed new kernel (221) and I upgaded kernel to 221. But after that I could not open SAP system. I checked dev_w1 and it is like below:
"dev_w1" 456 lines, 18662 characters
trc file: "dev_w1", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid KZP
M systemid 370 (Solaris on SPARCV9 CPU)
M relno 6400
M patchlevel 0
M patchno 221
M intno 20020600
M make: single threaded, Unicode, 64 bit
M pid 22022
M
M
M Fri Jan 29 15:11:00 2010
M ***LOG Q01=> tskh_init, WPStart (Workproc 1 1 22022) [thxxhead.c 1144]
M calling db_connect ...
C Got ORACLE_HOME=/oracle/KZP/920_64 from environment
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPKZP's password
C Connecting as /@KZP on connection 0 (nls_hdl 0) ... (dbsl 640 070208)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x10667d250 0x10668fcd0 0x10668f668
C Attaching to DB Server KZP (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8)
C Starting user session (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8,usrhp=0x10669a800)
C Now '/@KZP' is connected: con_hdl=0, nls_hdl=0, session_id=13.
C Got SAPKZP's password from OPS$-user
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=0x10668f598,usrhp=0x10669a800)
C Now I'm disconnected from ORACLE
C Connecting as SAPKZP/<pwd>@KZP on connection 0 (nls_hdl 0) ... (dbsl 640 070208)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x10667d250 0x10668fcd0 0x10668f668
C Starting user session (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8,usrhp=0x10669a800)
C Now 'SAPKZP/<pwd>@KZP' is connected: con_hdl=0, nls_hdl=0, session_id=13.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance KZP is running on sapkzpn2 with ORACLE version 9.2.0.7.0 since JAN 29, 2010, 15:10:46
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100129 151100 sapkzpn2
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip
,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Fri Jan 29 15:11:07 2010
I MtxInit: 1 0 0
M SHM_PRES_BUF (addr: 0xffffffff7597a000, size: 4400000)
M SHM_ROLL_AREA (addr: 0xfffffffe56000000, size: 134217728)
M SHM_PAGING_AREA (addr: 0xffffffff62000000, size: 67108864)
M SHM_ROLL_ADM (addr: 0xffffffff75db0000, size: 2672386)
M SHM_PAGING_ADM (addr: 0xffffffff71f00000, size: 656416)
M ThCreateNoBuffer allocated 572152 bytes for 1000 entries at 0xfffffffe4e004000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0xffffffff7bc00000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 1, WP_CNT = 8, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0xffffffff60000100, size: 30000000, end: 0xffffffff61c9c480)
B dbtbxbuf: Buffer TABLP (addr: 0xffffffff6d400100, size: 10240000, end: 0xffffffff6ddc4100)
B dbexpbuf: Buffer EIBUF (addr: 0xfffffffe5f800108, size: 4194304, end: 0xfffffffe5fc00108)
B dbexpbuf: Buffer ESM (addr: 0xfffffffe5f000108, size: 4194304, end: 0xfffffffe5f400108)
B dbexpbuf: Buffer CUA (addr: 0xfffffffe5101e108, size: 3072000, end: 0xfffffffe5130c108)
B dbexpbuf: Buffer OTR (addr: 0xfffffffe5e800108, size: 4194304, end: 0xfffffffe5ec00108)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Fri Jan 29 15:11:08 2010
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x106aa11e0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0xfffffffe51310070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0xfffffffe513103c8
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Fri Jan 29 15:11:09 2010
A
A -PXA--
A PXA INITIALIZATION
A System page size: 8kb, total admin_size: 5512kb, dir_size: 5480kb.
I *** ERROR => shmget(10006,153600000,2016) (22: Invalid argument) [shmux.c 1525]
A RABAX in run level 1
A RABAX in unkown environment: task_type=0, run level=1, rabax state=80000000 ztta_task_type=0
[0] DoStack2 ( 0x105af7010, 0xffffffff7fffd740, 0x1004a4ae4, 0x0, 0x105dbb180, 0x102e2f6e0 ), at 0x1004a4ae4
[1] CTrcStack2 ( 0x1036f6d60, 0x0, 0x17400, 0x102e947dc, 0x0, 0x102e2f6e0 ), at 0x1004a4680
[2] __1cXrabax_CStackToTraceFile6F_v_ ( 0x0, 0x1, 0x0, 0x3097000, 0x100000000, 0x103097058 ), at 0x100ae0e80
[3] __1cKrabax_init6FpkH_v_ ( 0x102002ad8, 0x0, 0x1, 0x0, 0x0, 0x0 ), at 0x100ad97d8
[4] ab_rabax ( 0x0, 0x80000000, 0x6da, 0x103879400, 0x1880, 0x1065e4110 ), at 0x100acfe3c
[5] __1cJab_pbinit6F_v_ ( 0x100000000, 0x102e947dc, 0x1, 0x102002ab4, 0x102f4e1c0, 0x103815550 ), at 0x100750de0
[6] ab_init ( 0x0, 0x5bd5000, 0xac8800, 0x5bd5000, 0x1, 0x0 ), at 0x100ac8d34
[7] ThrInitRunTime ( 0x100489c00, 0x489c00, 0x332c400, 0x102e94820, 0x1, 0x102e947d4 ), at 0x100476e84
[8] ThStartUp2 ( 0x101fec800, 0x194c800, 0x100000000, 0x102e947d4, 0x0, 0x10194cc00 ), at 0x100415860
[9] tskh_init ( 0x2e7a000, 0x1, 0x1, 0x540, 0x102e94400, 0x15 ), at 0x100260f14
[10] tskhstart ( 0x0, 0x2e94400, 0x0, 0x1003d6400, 0x3d6400, 0x100000000 ), at 0x10025cf9c
[11] DpMain ( 0x3641400, 0x2e7a000, 0x100000000, 0x1, 0x0, 0x0 ), at 0x1001856c0
A
A Fri Jan 29 15:11:10 2010
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX failed.
A *** suicide ON
A ** RABAX: level LEV_RX_VMIT_CLEANUP entered.
A ** RABAX: level LEV_RX_VMIT_CLEANUP completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD failed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
X *** ERROR => invalid MM administration (adm) (nil) (admCheck)(nil) [mmxx.c 2127]
A ** RABAX: level LEV_RX_WRITE_SNAP failed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Fri Jan 29 15:11:10 2010
A
A Error Code PXA_NO_SHARED_MEMORY.
A Module $Id: //bas/640_REL/src/krn/runt/abload3.c#44 $ SAP.
A Function ab_pbinit Line 1754.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS failed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_SUICIDE
A Shared Memory von 150000 Kilo-Bytes f\303\274r PXA nicht verf\303\274gbar..
A
A *
A * Non recoverable error. Aborting process...
A *
M ***LOG R63=> ThWpHalt, halt wp () [thxxhead.c 15213]
M in_ThErrHandle: 1
M *** ERROR => ThWpHalt: halt wp (step 1, th_errno 5, action 2, level 1) [thxxhead.c 9696]
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = 1
M mode = 0
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M
M PfStatDisconnect: disconnect statistics
M ThIErrHandle: action changed to 2
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M ThErrPrivHandle: set th_errno (5)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (5), detach T1/M0 [thxxhead.c 10129]
M
M Modeinfo for User T1/M0
M
M
M call ThrShutDown (1)...
A Saving PXA statistics.
M -
C-STACK -
[0] __1cNab_pxasavedir6F_i_ ( 0x102e94400, 0x2f63c00, 0x102e94800, 0x10200b800, 0x1, 0x0 ), at 0x10076c108
[1] ab_shutdown ( 0x0, 0x1, 0x102f3b400, 0x1, 0x102e94400, 0x2e94400 ), at 0x100aca150
[2] ThIErrHandle ( 0x10251b400, 0x2e94800, 0x102e7a324, 0x2, 0x2e94400, 0x102e94800 ), at 0x100293870
M -
M ***LOG Q0E=> SigIGenAction, signal ( 11) [sigux.c 902]
M in_ThErrHandle: 2
M ***LOG R0H=> ThIErrHandle, Loop in ThErrHandle, restart wp () [thxxhead.c 9717]
M -
C-STACK -
[0] DoStack2 ( 0x105af7010, 0xffffffff7fffc340, 0x1004a4ae4, 0x0, 0x105dbac40, 0x102e2f6e0 ), at 0x1004a4ae4
[1] CTrcStack2 ( 0x1036f6d00, 0x0, 0x17400, 0x102e947dc, 0x10049d16c, 0x102e2f6e0 ), at 0x1004a4680
[2] ThIErrHandle ( 0x0, 0x100000000, 0x3, 0x10331ff08, 0xb, 0x4 ), at 0x100291b08
[3] SigIGenAction ( 0x102c9f800, 0x1032acd04, 0x102c9f800, 0xb, 0x102e94820, 0x102e947d4 ), at 0x101e49c4c
[4] __sighndlr ( 0xb, 0xffffffff7fffcf80, 0xffffffff7fffcca0, 0x101e493bc, 0x0, 0x0 ), at 0xffffffff7c7d62e0
[5] call_user_handler ( 0xffffffff7d300200, 0xffffffff7d300200, 0xffffffff7fffcca0, 0x19, 0x0, 0x0 ), at 0xffffffff7c7c9e44
[6] sigacthandler ( 0x0, 0xffffffff7fffcf80, 0xffffffff7fffcca0, 0xffffffff7d300200, 0x0, 0xffffffff7c93c000 ), at 0xffffffff7c7ca03
c
[7] __1cNab_pxasavedir6F_i_ ( 0x102e94400, 0x2f63c00, 0x102e94800, 0x10200b800, 0x1, 0x0 ), at 0x10076c0f4
[8] ab_shutdown ( 0x0, 0x1, 0x102f3b400, 0x1, 0x102e94400, 0x2e94400 ), at 0x100aca150
[9] ThIErrHandle ( 0x10251b400, 0x2e94800, 0x102e7a324, 0x2, 0x2e94400, 0x102e94800 ), at 0x100293870
[10] __1cIrabax_do6FpkHpHi_v_ ( 0x102002ad8, 0x0, 0x41, 0x102e94800, 0x1, 0x1 ), at 0x100adc154
[11] ab_rabax ( 0x2, 0x2e94800, 0x1, 0x100000000, 0x2e94400, 0x2e94400 ), at 0x100ad3bc4
M -
M Fri Jan 29 15:11:11 2010
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = 1
M mode = 0
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 22022) [dpuxtool.c 318]
Also I tried to change SAPEXE.SAR and SAPEXEDB.SAR files from SAP Kernel CD. After that I started installation again. But I have same error. SAP system didn't work.
How can I solve this error?Cannot I install SAP 4.7 SR1 on Solaris 10 - ORacle 9.2.0.7?Is the problem about SAP profile parameters or Solaris Kernel parameters
Best regards,Also dev_disp is like below:
sid KZP
systemid 370 (Solaris on SPARCV9 CPU)
relno 6400
patchlevel 0
patchno 221
intno 20020600
make: single threaded, Unicode, 64 bit
pid 22016
***LOG Q00=> DpSapEnvInit, DPStart (00 22016) [dpxxdisp.c 1104]
shared lib "dw_xml.so" version 221 successfully loaded
shared lib "dw_xtc.so" version 221 successfully loaded
shared lib "dw_stl.so" version 221 successfully loaded
shared lib "dw_gui.so" version 221 successfully loaded
shared lib "dw_mdm.so" version 221 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >sapkzpn2_KZP_00 <
DpShMCreate: sizeof(wp_adm) 10752 (1344)
DpShMCreate: sizeof(tm_adm) 3728952 (18552)
DpShMCreate: sizeof(wp_ca_adm) 31200 (104)
DpShMCreate: sizeof(appc_ca_adm) 10400 (104)
DpShMCreate: sizeof(comm_adm) 316000 (632)
DpShMCreate: sizeof(vmc_adm) 0 (560)
DpShMCreate: sizeof(wall_adm) (40056/36728/88/192)
DpShMCreate: SHM_DP_ADM_KEY (addr: 0xffffffff70c00000, size: 4181592)
DpShMCreate: allocated sys_adm at 0xffffffff70c00000
DpShMCreate: allocated wp_adm at 0xffffffff70c01c88
DpShMCreate: allocated tm_adm_list at 0xffffffff70c04688
DpShMCreate: allocated tm_adm at 0xffffffff70c046b0
DpShMCreate: allocated wp_ca_adm at 0xffffffff70f92ce8
DpShMCreate: allocated appc_ca_adm at 0xffffffff70f9a6c8
DpShMCreate: allocated comm_adm_list at 0xffffffff70f9cf68
DpShMCreate: allocated comm_adm at 0xffffffff70f9cf80
DpShMCreate: allocated vmc_adm_list at 0xffffffff70fea1e0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0xffffffff70fea208
DpShMCreate: allocated wall_adm at 0xffffffff70fea210
MBUF state OFF
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0x0xfffffffe60000000
EsStdInit: Extended Memory 4092 MB allocated
<ES> 1022 blocks reserved for free list.
ES initialized.
Fri Jan 29 15:11:07 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1490]
***LOG Q0K=> DpMsAttach, mscon ( sapkzpn2) [dpxxdisp.c 10127]
DpStartStopMsg: send start message (myname is >sapkzpn2_KZP_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Jan 29 15:11:08 2010
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 221
Release check o.K.
Fri Jan 29 15:11:29 2010
ERROR => W0 (pid 22021) died [dpxxdisp.c 12698]
ERROR => W2 (pid 22023) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W3 (pid 22024) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbd --> 0xb9
ERROR => W4 (pid 22025) died [dpxxdisp.c 12698]
ERROR => W5 (pid 22028) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xb9 --> 0xb1
ERROR => W6 (pid 22030) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xb1 --> 0xa1
ERROR => W7 (pid 22038) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xa1 --> 0x81
Fri Jan 29 15:12:08 2010
ERROR => W1 (pid 22022) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0x81 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-22021 (SIGUSR2)
ERROR => DpWpKill(22021, SIGUSR2) failed [dpxxtool.c 2508]
killing W1-22022 (SIGUSR2)
ERROR => DpWpKill(22022, SIGUSR2) failed [dpxxtool.c 2508]
killing W2-22023 (SIGUSR2)
ERROR => DpWpKill(22023, SIGUSR2) failed [dpxxtool.c 2508]
killing W3-22024 (SIGUSR2)
killing W7-22038 (SIGUSR2)
ERROR => DpWpKill(22038, SIGUSR2) failed [dpxxtool.c 2508]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:18 2010
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Fri Jan 29 09:12:18 2010
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 22021 Ended no 1 0 78 SAPSYS
1 DIA 22022 Ended no 1 0 78 SAPSYS
2 UPD 22023 Ended no 1 0 78 SAPSYS
3 ENQ 22024 Ended no 1 0 78 SAPSYS
4 BTC 22025 Ended no 1 0 78 SAPSYS
5 BTC 22028 Ended no 1 0 78 SAPSYS
6 SPO 22030 Ended no 1 0 71 SAPSYS
7 UP2 22038 Ended no 1 0 71 SAPSYS
Dispatcher Queue Statistics Fri Jan 29 09:12:18 2010
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 6 ( 66%), shm 3 ( 33%)
since last update total 9, udp 6 ( 66%), shm 3 ( 33%)
Dump of tm_adm structure: Fri Jan 29 09:12:18 2010
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Jan 29 09:12:18 2010
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:23 2010
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >sapkzpn2_KZP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmKeySharedMMU( 57 ) = 0 (octal)
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmKeySharedMMU( 57 ) = 0 (octal)
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing proc (22019) (SOFT_KILL)
Stop icman
killing proc (22020) (SOFT_KILL)
Terminate gui connections
kill(22019,0) successful -> process alive
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:24 2010
NiISelect: TIMEOUT occured (1000 ms)
kill(22019,0) -> ESRCH: process died
kill(22020,0) -> ESRCH: process died
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >sapkzpn2_KZP_00 <)
NiIMyHostName: hostname = 'sapkzpn2'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 1, 3 )
ShmKeySharedMMU( 1 ) = 0 (octal)
ShmCreate( 1, 0, 2, -> 0x0xffffffff7b100000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 2, 3 )
ShmKeySharedMMU( 2 ) = 0 (octal)
ShmCreate( 2, 0, 2, -> 0x0xffffffff70c00000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 3, 3 )
ShmKeySharedMMU( 3 ) = 0 (octal)
ShmCreate( 3, 0, 2, -> 0x0xffffffff6fc00000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmKeySharedMMU( 4 ) = 0 (octal)
ShmProtect( 4, 3 )
ShmKeySharedMMU( 4 ) = 0 (octal)
ShmCreate( 4, 0, 2, -> 0x0xffffffff71f00000 )
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 10, 14, 0, 2, 0x0xffffffff7fffe970 )
ShmGet( 10, 14, 0, 2, -> 0x0xffffffff7597a000 )
ShmProtect( 14, 3 )
ShmProtect: Key=14 not attached
ShmProtect( 14, 3 )
ShmCreate( 14, 0, 2, -> 0x0xffffffff7597a000 )
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 10, 11, 0, 2, 0x0xffffffff7fffe970 )
ShmGet( 10, 11, 0, 2, -> 0x0xffffffff76040000 )
ShmProtect( 11, 3 )
ShmProtect: Key=11 not attached
ShmProtect( 11, 3 )
ShmCreate( 11, 0, 2, -> 0x0xffffffff76040000 )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmKeySharedMMU( 19 ) = 0 (octal)
ShmProtect( 19, 3 )
ShmKeySharedMMU( 19 ) = 0 (octal)
ShmCreate( 19, 0, 2, -> 0x0xffffffff66000000 )
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 33 ) = 0740 (octal)
ShmKeySharedMMU( 33 ) = 0 (octal)
ShmProtect( 33, 3 )
ShmKeySharedMMU( 33 ) = 0 (octal)
ShmCreate( 33, 0, 2, -> 0x0xffffffff70400000 )
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmKeySharedMMU( 41 ) = 0 (octal)
ShmProtect( 41, 3 )
ShmKeySharedMMU( 41 ) = 0 (octal)
ShmCreate( 41, 0, 2, -> 0x0xffffffff66800000 )
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 42, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmKeySharedMMU( 40 ) = 0 (octal)
ShmProtect( 40, 3 )
ShmCreate( 40, 0, 2, -> 0x0xffffffff60000000 )
ShmGet( 40, 42, 0, 2, -> 0x0xffffffff62972000 )
ShmProtect( 42, 3 )
ShmProtect: Key=42 not attached
ShmProtect( 42, 3 )
ShmCreate( 42, 0, 2, -> 0x0xffffffff62972000 )
ShmDelete( 40 )
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 43, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 45, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 44, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmKeySharedMMU( 31 ) = 0 (octal)
ShmCreate( 31, 0, 2, -> 0x0xffffffff6f400000 )
closing connect handles (dgm + tcp)
DpDelSocketInfo: del info for socket 1 (type=2)
NiICloseHandle: shutdown and close hdl 1 / socket 8
DpDelSocketInfo: del info for socket 2 (type=1)
NiBufClose: clear extensions for hdl 2
NiBufSetStat: bufstat of hdl 2 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 2 / socket 9
***LOG Q05=> DpHalt, DPStop ( 22016) [dpxxdisp.c 9033]
shutdown completed - server stopped ***
Good Bye .....
Could you please help me about this issue?
Best regards -
Searching Oracle 8.1.7 Client for Solaris on x86/Intel
Hi all,
I need an Oracle client 8.1.7 running on a Sun Solaris on a Intel/x86 chipset (in VMware)
Exists there any location to download this client?
thanx for help!
Andreas
Salzburg, AustriaAre there plans to have a Solaris x86 version downloadable on OTN? I am making the OS decision for a new development server. I would like it to be Solaris x86 but if Oracle is a no-go on Solaris x86, I will have to use Linux or... hate to say it... M$
-
Oracle 10g R2 installation on sun solaris 10 Sparc machine
Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran KanniahIt is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz -
Installing oracle 10g release 2 on spark solaris!! urgent help!
hi guys!
Am installing oracle 10g r2 on spark sun solaris. I did install the software without any pb, but when installing the database using dbca, I have this errors.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 28
ORA-27301: OS failure message: No space left on device
ORA-27302: failure occurred at: sskgpcreates
Edited my kernel parameters and in the /etc/system file, ai've added
set noexec_user_stack=1
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmsl=256
set semsys:seminfo_semvmx=32767
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
Space aint an issue and dont know how to over come this error!
Should ai just install the db using scripts and run the neccessary .sql scripts instead of going through dbca?
junior DBA in distress.This appears to be because of low semaphores setting. Did you reboot your server after making the /etc/system parameter changes ?
-Ramesh -
Oracle 11g R2 on HP and Solaris
Hello All,
In the Last Week i was installing Oracle 11R2 on two HP servers and one Solaris server. i faced common issues on the three servers and i posted threads about some of these issues.
But i want to summarize it so i know the solution of each one in order not to face it again.
Below is the info
I have 3 servers, two of them are HP where Oracle 10g is installed and one Solaris server where i am doing the Oracle installation for the first time.
On the 3 servers and when i was installing Oracle 11g R2 the installation failed at the end when it was trying to create the db with this error: the file Seed_Database.dfb containing the datafiles information is missing.
knowing that i download it Oracle 11g R2 from the Oracle website for the three server. Why this file is always missed ? and even now and after i created a custom database manually (Not during the installation) i can't create a "general purpose db" through dbca because it needs this template file.
while creating the database on the 3 servers and on step 4 of 12 of the tab related to OEM is disabled. and the emctl is not automatically configured after the creation of the db. why this tab is always disabled on step 4 of 12?
Regards.schavali wrote:
On the download pages (such as http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-sparc64soft-088481.html) you will see cksums listed - you need to verify cksums to ensure that your download is not corrupted.
http://en.wikipedia.org/wiki/Cksum
HTH
SriniI would think if the download were corrupted, as evidenced by a mis-match in the checksum, he probably never could have unzipped it, much less actually ran an install that simply didn't create some of the stuff he wanted.
;-) -
Oracle 9iAS on Solaris w/Oracle 8.1.6 on NT 4
We are currently running Oracle 7.3.4 on NT 4 w/Oracle Application Server 4.0.8.1 on NT 4. We are planning to set up a new Oracle 8.1.6 database server to replace the 7.3.4 database, and after that set up a Solaris box with Oracle 9iAS to replace the OAS 4.0.8.1. Can someone (ideally from Oracle) comment whether there are any issues which would cause problems between such a final set up? I heard that database-wise 8.1.5 was the minimum necessary to work with iAS even back when it was 8iAS. In any case, I would like to get some confirmation that the NT database and the Solaris Application Server will not have problems. I didn't see any comments about problems in a quick look at the 9iAS release notes or installation guide.
Thanks.
-Ken Ho<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Todd Eisemann ([email protected]):
HI
Can anyone tell me the mystical secrets buried in Note 131299.1? I have this same problem on a Pentium 4. Yet, I do not have an Oracle support contract. I bought the OTN bundle, but did not buy any support.
Do I have to buy support just to load any of the OTN bundle on my new P4 system?
thanks
<HR></BLOCKQUOTE>
problem @see: http://developer.intel.com/design/processor/future/manuals/knownissue.htm
solution @see: JRE Version 1.2.2_007 for Microsoft Windows
(http://java.sun.com/products/jdk/1.2/jre/download-windows.html)to get new symcjit.dll, replace old version.
null -
Is it Possible to install oracle 9i 32 bit on Sun Solaris Intel Edition
Dear OTN Members ,
It is possible to install ORACLE 9I Sun SPARC Solaris (32 Bit) on
Sun Solaris Intel Editon 2.8 . Please inform me on
email :-
[email protected]
[email protected]
Thanking You
Piyush Patel
- Server name :- pi.com
- Filename
- Date/Time
- Browser + Version : Netscape 4.7
- O/S + Version : Sun Solaris Intel Edition 2.8857211 wrote:
I just need some advice on installing oracle 11gWhat part/product of "oracle 11g" exactly?
Installation Guides should be clear enough, if read. Also read Release Notes for additional support/unsupport info.
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
http://docs.oracle.com/cd/E11882_01/install.112/e24187/pre_install.htm
However the Installation Guide for Database Client adds:
"Note: Oracle provides 32-bit (Windows x86) and 64-bit (Windows x64) versions of Oracle Database Client. _Oracle certifies 32-bit Oracle Database Client on Windows x64_." (underline added) -
Oracle 10(10.1.0) on Solaris 5.10 Intell
Hi!
I have installed oracle 10g(10.1.0) under solaris intel 5.10,at final stage of installation, while linking the files i receive this error
error:-unable to find make utility in location /usr/ccs/bin/make
i press ignore button 4 to 5 times. then it display installation successfull.
then i started $dbca & every thing goes fine but at 12/12 step it shows a HTML page to save ,i save it but database creation does not apper. i tryed all my possible ways.
could u suggest me what i have missed.i have started installation with this command
$./runInstaller -ignoreSysPrereqs &
thanks n best regards.
viq
Message was edited by:
user557218
Message was edited by:
user557218At first I need to say you did at least two mistakes.
1. You executed runInstaller with -ignoreSysPrereqs
2. You ignored the (very important) error messages
According to error message that you got I belive that your OS is missing required packages important for succesful install (probably third mistake).
To check whether all required packages are installed execute following command from shell:
pkginfo -i SUNWlibms SUNWtoo SUNWi1cs SUNWi15cs SUNWxwfnt SUNWxwplt SUNWmfrun SUNWxwplr SUNWxwdv SUNWgcc SUNWbtool SUNWi1of SUNWhea SUNWlibm SUNWsprot SUNWuiu8Install the missing packages.
Then execute (as oracle) $ORACLE_HOME/bin/relink all command.
Hope that helps. -
Installation guide Solaris 10 / Oracle
Hi,
I have been looking for updated installation guides for Solaris 10 / Oracle 10 on service.sap.com/erp-inst and other locations, but I can only find relevant documentation from February 2005. Does any one know where I can get more updated information?
Thanks!
Regards,
Thomas KjelsrudThomas,
I was able to access the same. May be you missed to scroll down the page..
No issues access the below link
<a href="https://websmp102.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002599162004E">Inst guide for All scenarios including Solaris 10/ Oracle</a>
Note that there are two parts
Part I: Planning and Preparation
Part II: Installation and Post-Installation
You must see the planning guide for your scenario Solaris /Oracle installation
Are you planning for distributed or central installation..?
Hope this helps
Good luck
Cheers
Senthil -
Migrate solaris 8 oracle applications to solaris 10 using oracle vm
Hi,
I have Oracle Applications 11.5.8 running on Solaris 8 on SPARC machine (the forms and concurrent servers) and Linux SLES9 for the Oracle 9i database server.
I am exploring if it's possible to migrate the forms and concurrent tier from Solaris 8 on SPARC to a Solaris 10 Oracle VM running on x86 platform. That is, 1) install Oracle VM on x86 platform 2) install solaris 10 on the solaris container of this VM (solaris 8 not supported) 3) try to move forms and concurrent application tier to this solaris 10.
Has anyone tried this before or know whether it can be done?Moderator Action:
This thread has been moved from the Solaris On x86 forum space,
to the Oracle Applications Server forum space,
for closer topic alignment. -
Solaris 10 + Oracle 10gR2 RAC question
Hello everyone
Has anyone come across the case where the CRS services of Oracle cause
the public interface to get turned off and then restored at random
time intervals? To elaborate, we have a 2 node cluster database.
Solaris 10, Oracle 10gR2 RAC with patch 10.2.0.3 applied. No SUN
clustering is involved. When the cluster software is down (nodeapps,
asm, database instances all down) /var/adm/messages show nothing. When
we start nodeapps on the 2 nodes(thus initiating some form of
communication between the nodes), at random time intervals we get
"interface ce0 turned off and interface ce0 restored" in /var/adm/
messages. When we check the status of the RAC, we see that one node's
vip has been assigned to the other. This on/off behaviour of the NIC
can be eliminated only if we continuously PING it from a another
client in the network.
As a matter of fact, the RAC and the RDBMS work perfectly when we keep
pinging the 2 nodes from an other client on the network. We even
managed to run a long batch job, distributed on cluster managed
services on the 2 instances, and it completed after 9 hours without
any problems.
Does anyone have a hint on this behaviour? Is there some sort of
timeout for the network cards? Some power saving features? Googling
around I came across the new Containers feature available on Solaris
10. Is there a way that I can verify that either RAC or the RDBMS is
running in "container" mode ( since the solaris and Oracle
installation was not performed by me)? Any other ideas?
Thank you for readingIm an Oracle guy - not the SA type -
But on ours - the SA configured this cluster incorrectly. We use veritas. instead of making ipmp groups for the interfaces - he built the cluster according to veritas docs. That is - he has two publics - on difference interfaces and different privates on different interfaces. oracle can only two interfaces - no matter if its a ipmp group or a device name. one is used for private- the other is used for public - So sure the veritas cluster filesystems will survive - but the Oracle Cluster will not - nodes will reboot -
Is your system set up incorrectly as i described above? if it is - a quick test would be - turn down the other interfaces - and only leave the two interfaces you mention above up that you configured for Oracle CRS
This other sharp sa was able to go through the arp table and see duplicate IPs - and the routing was attempted via an interface that oracle doesnt see. You can not define two different interfaces public - and two different interfaces for private - -
Solaris 10 , oracle 102_64 bit and WAS Kernel 7.00
i run the top command
load averages: 1.12, 1.14, 1.15; up 0+02:39:01 18:50:27
117 processes: 115 sleeping, 2 on cpu
CPU states: 93.0% idle, 6.3% user, 0.6% kernel, 0.0% iowait, 0.0% swap
Memory: 10G phys mem, 5719M free mem, 36G swap, 36G free swap
PID USERNAME LWP PRI NICE SIZE RES STATE TIME CPU COMMAND
6010 sd2adm 1 0 0 5199M 884M cpu 138:24 94.97% disp+work
5746 sd2adm 1 57 0 13M 3848K sleep 1:41 2.17% saposcol
5348 orasd2 1 59 0 1289M 1199M sleep 1:08 1.96% oracle
i am having trouble one of the disp+work process is runing like 94% ..this problem has started in the Sun10 version or oracle 10G , earlier in Solaris 9 , oracle 9206 no problem all below 1%.
Overall very poor system performance.Hi
I checked I think It is normal behaviour some times.
When u change priority it will use large chunk of memory for high Priority or consult ur sys admin for CPU load balancing. CPU load balancing can be done through some utilities also.
Some times changing priority works for me.
Let me know if u need any further help.
Regards
Vinod -
Solaris 10 Oracle 10g and semaphores
Hi, Can you help me,
We have Oracle installed on a solari 10 box, and I think we have a problem with the semaphores, currently the project is set as below, out of the box
user.oracle:100::oracle::process.max-sem-nsems=(priv,256,deny);project.max-sem-ids=(priv,100,deny);project.max-shm-ids=(priv,100,deny);projec
t.max-shm-memory=(priv,4294967296,deny)
The machine has 16gb Ram
Our SGA is 3gb.
The .ora file the processes is set at 1400.
Is the project set wrong above and what do I need to set it at, any idea how to work it out.
The reason I am asking the question as the system get's busy we get errors on the os station cannot assign semaphores.
I lloked up metalink, just can't get my head round it, somewhere it said you have to set semmsid, but according to an oracle metalink that was obsolete in solaris 10?
ThanksJan 25 04:50:00 cimadbs01 cron[3906]: [ID 832980 auth.error] pam_unix_cred: project.max-shm-memory resource control
assignment failed for project "user.oracle"
Jan 25 04:50:00 cimadbs01 cron[3907]: [ID 832980 auth.error] pam_unix_cred: project.max-sem-ids resource control ass
ignment failed for project "user.oracle"
Jan 25 05:50:00 cimadbs01 cron[22554]: [ID 832980 auth.error] pam_unix_cred: project.max-shm-ids resource control assig
nment failed for project "user.oracle"
Jan 25 05:50:00 cimadbs01 cron[22553]: [ID 832980 auth.error] pam_unix_cred: project.max-sem-ids resource control assignm
ent failed for project "user.oracle"
Jan 25 07:17:00 cimadbs01 cron[19870]: [ID 832980 auth.error] pam_unix_cred: project.max-shm-ids resource control assignme
nt failed for project "user.oracle"
Jan 25 07:17:00 cimadbs01 cron[19869]: [ID 832980 auth.error] pam_unix_cred: project.max-sem-ids resource control assignmen
t failed for project "user.oracle"
Thanks for the messages, I'm looking for a guide on metalink that states how to come up with the measures for the kernal, if I know the sga size, the number of processes etc..Is there a formula.?
Edited by: user3356326 on 31-Jan-2009 13:48 -
Reg: Oracle 9i Enterprise Edition software for solaris x86 (32-bit)
Hi,
Where can i download the Oracle 9i Enterprise Edition software for solaris x86 (32-bit).
Thanks in advance.
Edited by: ora_man_8873786 on May 14, 2011 12:50 AMIf you have a CSI you can always order the CD at My Oracle Support by submitting a SR.
Sybrand Bakker
Senior Oracle DBA
Maybe you are looking for
-
Check box in a table not being read on auto read by JAWS(Screen Reader)
Hi Experts, I am working on Accessible pages in ADF. Check box in table is not being read on "Auto Read" function by jaws. Auto read is a function that allows the user to start the screen reader at the top of the page and read the entire thing that i
-
External WD drive not recognise by Time Machine
i have a WD drive that i use to back up my macbook pro, last update it was an error and update was not completed, then it didn't allow me to properly eject the drive, so I just disconnect it, now when i plug it in mac doesn't recognise the disk, i ha
-
Access to the time capsule harddrive through internet.
Hi everyone, I bought a few months ago a Time capsule and it is working perfeclty as a network and hard drive under. It is connected to the router unde a bridge mode. My prooblem is coming when I want to access through internet with my Macbook to m
-
Od dnia dzisiejszego jestem posiadaczem urządzenia Ipad 2 w wersji Wi - Fi bez opcji 3g. Zakupiłem to urządzenie w sieci sklepów Euro RTV AGD w Dąbrowie Górniczej. Niestety jest to urządzenie wystawowe. Po przyjeździe do domu, i podłączeniu do komput
-
How to provide signal lights in ALV output
Hi Experts, i have one requirement. i am developing one object oriented alv report based on standard report(RFREISCN).i have one requirement in the output provide signal lights(RED(for inactive) AND YELLOW(for account assignment locks)) and to provid