Oracle Apps adopter - Record type

Hi
Trying to figure out how to pass XML data to Oracle Apps adopter that have record type.
If you have came across with similar situation, appreciate your response.
Thanks

You can't just us and transformation/assign for this ?
With xml-data i assume you just want to extract the data from let's say the input-variable of your process ?

Similar Messages

Can you confirm for me please? - jdbc to pl/sql record types

Hi, I was hoping somebody could confirm the following please? I've been researching this in the Oracle JDBC docs and the Internet, but would feel more comfortable if somebody would confirm my findings.
I have a 10g database pl/sql procedure that takes a pl/sql record type as both IN and OUT parameter. I'm not allowed to modify this legacy procedure, though I may create new supporting code.
My research shows there is no inherit support in JDBC for Oracle pl/sql record types as per the Oracle JDBC docs.
As a solution, if the procedure only returned a record type, my understanding is I could create a ref cursor in pl/sql, as well as a wrapper procedure that calls my original procedure, and returns the record type through the ref cursor. This could then be used by my JDBC code as JDBC supports ref cursors as a return type.
However in my case, as the record type is both an IN and OUT parameter of my procedure, my research so far says JDBC support for ref cursors does not allow the writing of value to the ref cursor to be submitted back to the database. Is this correct?
If this limitation exists, as such the better (and only?) solution is to create a shadow pl/sql procedure that takes all the record elements as separate IN OUT parameters and then create a private record based on the record type and pass it to the original procedure.
Is my research here correct? Any help appreciated.
Thanks & regards,
CM.

Chris,
As far as I know, PL/SQL record types are not supported in JDBC.
I believe you may be able to use TopLink.
I think Kuassi Mensah may have some examples in his book Oracle Database Programming.
Alternatively, you could use an Oracle object instead of a PL/SQL record.
This would be similar to what you are suggesting except that instead of a ref cursor, you would transfer the PL/SQL record to an Oracle object.
Good Luck,
Avi.

Oracle XML Gateway- Mapping XML to Oracle Apps API - Wrong Number or types

XML GATEWAY INBOUND – CALLING AN API (PL/SQL record type IN variable) TO INSERT THE DATA INTO SAMPLE TABLE
Hi,
I am using XML Gateway to push data into Oracle Apps using a procedure call with “Record Type” as the parameter. I am getting a “wrong number” or types of arguments mismatch error inspite of following the process described in the Oracle XML Gateway User’s Guide
Steps followed:
DB
1. I Created a sample table XX_CUST_HIST(ID NUMBER, ACCOUNT_NAME VARCHAR2(50), FIRST_NAME VARCHAR2(50), LAST_NAME VARCHAR2(50), TITLE VARCHAR2(50))
2. I then Created a package ‘XX_XML_DEMO_API’ in which we have defined a record type and a procedure.
3. The Record type ‘customerRecordType’ holds account_name , first_name, last_name and the title.
4. The Procedure ‘insert_customer_r’ takes 2 IN arguments :
1. p_ id number
2. p_customer customerRecordType
5. The procedure will insert the values into xx_cust_hist table
p_id -> id
p_customer.account_name -> account_name
p_customer.first_name -> first_name
p_customer.last_name -> last_name
p_customer.title -> title
Now I need to call the procedure ‘XX_XML_DEMO_API . insert_customer_r’ from XML gateway.
Following are the steps to call the procedure:
[1] Create DTD
ELEMENT NEW_CUSTOMER_APIR (DATAAREA)
ELEMENT DATAAREA (CUSTOMER_DATA)
ELEMENT CUSTOMER_DATA (ID, CUSTOMER_RECORD)
ELEMENT ID (#PCDATA) ELEMENT CUSTOMER_RECORD (ACCOUNT_NAME, FIRST_NAME, LAST_NAME, TITLE)
ELEMENT ACCOUNT_NAME (#PCDATA)
ELEMENT FIRST_NAME (#PCDATA)
ELEMENT LAST_NAME (#PCDATA)
ELEMENT TITLE (#PCDATA)
[2] Creation of XML map Data Definition type for Source and Destination are set to XML.
While executing the procedure ‘XX_XML_DEMO_API . insert_customer_r’ in post_process from the message designer, instead of 2 (p_id IN number , p_customer IN customerRecordType) parameters it is showing 6 parameters (p_id IN number, p_customer IN customerRecordType, account_name IN varchar2, first_name IN varchar2, last_name IN varchar2, title IN varchar2). Six parameters are getting mapped, instead of the 2 that the procedure really needs.
[3] Testing of XML map. Error message in transaction monitor:
ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'INSERT_CUSTOMER_R' ORA-06550: line 1, column 7: PL/SQL: Statement ignored -
ECX_ACTIONS.BIND_PROC_VARIABLES
The process executed and produced the error message given in the step 3. The standard documentation is unclear on how this should be done. Being a newbie to the XML Gateway technology I am unable to get a clue about what the error message could be and which step of the process produced the message. Could anyone help me to proceed further?
Thanks in advance.

Hi Siva,
It seems like the walletkey property of event type is defined incorrectly. Please try by defining the event as follows:
<wlevs:property name="walletkey" type="char" length="20"/>
Use "char" instead of "char[]".
Best Regards,
Sandeep

Unable to create Oracle Apps Adapter whose API parameters are Records

Hi All,
I face an issue in creating an Apps adapter whose API parameter's are of type Records. From previous posts I came to know that its one of the bug in JPublisher.
I'm new to this term. Can you please provide how to create this adapter?
Exception raised: The Wrapper procedure could not be found in the package for the schema.
Thanks
Karthick

where are you getting this error ? Sometimes some API's cannot be called from Oracle Apps Adapter, will be getting some JPublisher Error, try configuring the same API from Database Adapter, this workaround works sometimes....
If you get the error in a different instance while it was working in earlier instance, read further...
Generally when you are working with the oracle apps adapter, and for any API, the input paramaters are record types, there will be a wrapper package created for the API you have configured. So, this error comes when you migrate the composite to a different instance, make sure you have moved that wrapper package also to the new database instance, if you do that, this error will go.
Hope this helps,
N

Error : oracle.jbo.NoDefException: JBO-25002: Definition oracle.apps.icx.por.schema.server.XXTBPoRequisitionLineEO of type Entity Definition not found

Hi, while extending EO, we are getting error "oracle.jbo.NoDefException: JBO-25002: Definition oracle.apps.icx.por.schema.server.XXTBPoRequisitionLineEO of type Entity Definition not found". We have placed class and xml files in respective folder, imported customization and bounced the system but still error did not go. Kindly help to trace the issue.

Can you elaborate how you deployed your custom code, were steps documented here followed ? Did you create a ADF library jar and copy it over to the application lib directory ? Please provide the exact steps done for deployment.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Calling Oracle Stored proc with record type and table Type

I have a oracle SP which takes record type and table Type which are used for order management.
Is there anay way to populate parameters with these datatypes and call the stored procedure using ODP.NET?
Please help.
Thanks in advance

Hi,
ODP supports associative arrays and REF Cursors. There is no support for PLSQL table of records.
Jenny

Calling oracle API having parameter as record type throughPL/SQL WebService

Hi All,
I dont know whether this is the right forum to put this query, but as i am using a pl/sql web service , putting the query on this forum.
My requirement is to call oracle API which in turh creates a single Invoice(using Ar_Invoice_Api_Pub.create_single_invoice )
But the issue is this API in turn has some of the input parameters as Record type and table type, my concern is how to pass this data(record type or table type) as parameter thorugh java code .. If i use Collection or Hashmap will it work , I dont think so , some intermediate conversion will require.
Subsequently the other requirement is fetch this record/table type data and return it to the java code
Please correct me if i am wrong and suggest a proper solution if anybody is aware off or tried such things before.
Thanks in advance.
Regards,
Anant.

Hi,I'm new comer of this world,
I've a pl/sql like this:
package MY_WS_API is
type record_set is ref cursor;
PROCEDURE Get_User_Info(p_user_id VARCHAR2,
p_rep_id VARCHAR2,
p_flag out number,
p_msg out varchar2,
p_recordset out record_set);
end MY_WS_API;
when I using jdeveloper trying to publish it as a webservice, in the step 4 of the wizzard poping me choose the program unit to expose, the PROCEDURE Get_User_Info is not available and told me "Ref cursor Type is not supported due to a jdbc limitation and Ref Cursor Types are only supported for use of return type".
THE QUESTION is:
1.the cursor I used is of return type,I'm not very understanding the "why not" message upon.
2.in such case , need I trans the return cursor into Object[] if have to?
3.any other limitation for generating WS from PL/SQL using jdeveloper?
Thanks!

Why record had been unlock in Oracle Apps form?

I have a problem with lock in oracle apps forms.
The problem occurs with all forms in the Oracle Financials (forms with standard oracle apps user-exit), the problem does not occur with standard Oracle default form (outside of the oracle apps, form without user-exit included in Oracle Financials).
For exemple, I will take the Define Lookups forms.
If USER1 modify a record (ex. modify the date from), the record is locked, if USER2 try to update the same record in an other session, he will received an error message indicating that the record is locked and he will not be able to update it. This is normal.
But ..., if USER1 WAIT 1 minute, and just press TAB to go to an other field (WITHOUT SAVING, WITHOUT DOING ANYTHING ELSE), the record is unlock.
USER2 can modify the same record without having the locked message. This is the problem, USER2 should receive an error message because USER1 did not save the record yet but the message do not appear. At this moment USER2 lock the record. If USER1 press SAVE key, his session will be freeze until USER2 save the record.
Why the record had been unlock for USER1 session?
My Oracle Apps version is 11.5.5.
Does somebody ever seen this problem ?
Thanks.

There are forums specifically for posing questions relating to EBS. I would recommend you ask your question there.

Like % in a query running on an Oracle Apps table with 8 million records

I am running the below query. As per the explain plan it is using the index on organization_id and inventory_item_id.
select segment1 from mtl_system_items where organization_id = 100 and inventory_item_id like '123456%'
It takes about 15 min to run this query which is a long time as this query returns values to the frontend created in asp. The webpage would time out by the time this query completes running. do you have any suggestions on how to run this query faster?

It is an oracle apps table. below is the structure -
Name Null? Type
INVENTORY_ITEM_ID NOT NULL NUMBER
ORGANIZATION_ID NOT NULL NUMBER
LAST_UPDATE_DATE NOT NULL DATE
LAST_UPDATED_BY NOT NULL NUMBER
CREATION_DATE NOT NULL DATE
CREATED_BY NOT NULL NUMBER
LAST_UPDATE_LOGIN NUMBER
SUMMARY_FLAG NOT NULL VARCHAR2(1)
ENABLED_FLAG NOT NULL VARCHAR2(1)
START_DATE_ACTIVE DATE
END_DATE_ACTIVE DATE
DESCRIPTION VARCHAR2(240)
BUYER_ID NUMBER(9)
ACCOUNTING_RULE_ID NUMBER
INVOICING_RULE_ID NUMBER
SEGMENT1 VARCHAR2(40)
SEGMENT2 VARCHAR2(40)
SEGMENT3 VARCHAR2(40)
SEGMENT4 VARCHAR2(40)
SEGMENT5 VARCHAR2(40)
SEGMENT6 VARCHAR2(40)
SEGMENT7 VARCHAR2(40)
SEGMENT8 VARCHAR2(40)
SEGMENT9 VARCHAR2(40)
SEGMENT10 VARCHAR2(40)
SEGMENT11 VARCHAR2(40)
SEGMENT12 VARCHAR2(40)
SEGMENT13 VARCHAR2(40)
SEGMENT14 VARCHAR2(40)
SEGMENT15 VARCHAR2(40)
SEGMENT16 VARCHAR2(40)
SEGMENT17 VARCHAR2(40)
SEGMENT18 VARCHAR2(40)
SEGMENT19 VARCHAR2(40)
SEGMENT20 VARCHAR2(40)
ATTRIBUTE_CATEGORY VARCHAR2(30)
ATTRIBUTE1 VARCHAR2(150)
ATTRIBUTE2 VARCHAR2(150)
ATTRIBUTE3 VARCHAR2(150)
ATTRIBUTE4 VARCHAR2(150)
ATTRIBUTE5 VARCHAR2(150)
ATTRIBUTE6 VARCHAR2(150)
ATTRIBUTE7 VARCHAR2(150)
ATTRIBUTE8 VARCHAR2(150)
ATTRIBUTE9 VARCHAR2(150)
ATTRIBUTE10 VARCHAR2(150)
ATTRIBUTE11 VARCHAR2(150)
ATTRIBUTE12 VARCHAR2(150)
ATTRIBUTE13 VARCHAR2(150)
ATTRIBUTE14 VARCHAR2(150)
ATTRIBUTE15 VARCHAR2(150)
PURCHASING_ITEM_FLAG NOT NULL VARCHAR2(1)
SHIPPABLE_ITEM_FLAG NOT NULL VARCHAR2(1)
CUSTOMER_ORDER_FLAG NOT NULL VARCHAR2(1)
INTERNAL_ORDER_FLAG NOT NULL VARCHAR2(1)
SERVICE_ITEM_FLAG NOT NULL VARCHAR2(1)
INVENTORY_ITEM_FLAG NOT NULL VARCHAR2(1)
ENG_ITEM_FLAG NOT NULL VARCHAR2(1)
INVENTORY_ASSET_FLAG NOT NULL VARCHAR2(1)
PURCHASING_ENABLED_FLAG NOT NULL VARCHAR2(1)
CUSTOMER_ORDER_ENABLED_FLAG NOT NULL VARCHAR2(1)
INTERNAL_ORDER_ENABLED_FLAG NOT NULL VARCHAR2(1)
SO_TRANSACTIONS_FLAG NOT NULL VARCHAR2(1)
MTL_TRANSACTIONS_ENABLED_FLAG NOT NULL VARCHAR2(1)
STOCK_ENABLED_FLAG NOT NULL VARCHAR2(1)
BOM_ENABLED_FLAG NOT NULL VARCHAR2(1)
BUILD_IN_WIP_FLAG NOT NULL VARCHAR2(1)
REVISION_QTY_CONTROL_CODE NUMBER
ITEM_CATALOG_GROUP_ID NUMBER
CATALOG_STATUS_FLAG VARCHAR2(1)
RETURNABLE_FLAG VARCHAR2(1)
DEFAULT_SHIPPING_ORG NUMBER
COLLATERAL_FLAG VARCHAR2(1)
TAXABLE_FLAG VARCHAR2(1)
QTY_RCV_EXCEPTION_CODE VARCHAR2(25)
ALLOW_ITEM_DESC_UPDATE_FLAG VARCHAR2(1)
INSPECTION_REQUIRED_FLAG VARCHAR2(1)
RECEIPT_REQUIRED_FLAG VARCHAR2(1)
MARKET_PRICE NUMBER
HAZARD_CLASS_ID NUMBER
RFQ_REQUIRED_FLAG VARCHAR2(1)
QTY_RCV_TOLERANCE NUMBER
LIST_PRICE_PER_UNIT NUMBER
UN_NUMBER_ID NUMBER
PRICE_TOLERANCE_PERCENT NUMBER
ASSET_CATEGORY_ID NUMBER
ROUNDING_FACTOR NUMBER
UNIT_OF_ISSUE VARCHAR2(25)
ENFORCE_SHIP_TO_LOCATION_CODE VARCHAR2(25)
ALLOW_SUBSTITUTE_RECEIPTS_FLAG VARCHAR2(1)
ALLOW_UNORDERED_RECEIPTS_FLAG VARCHAR2(1)
ALLOW_EXPRESS_DELIVERY_FLAG VARCHAR2(1)
DAYS_EARLY_RECEIPT_ALLOWED NUMBER
DAYS_LATE_RECEIPT_ALLOWED NUMBER
RECEIPT_DAYS_EXCEPTION_CODE VARCHAR2(25)
RECEIVING_ROUTING_ID NUMBER
INVOICE_CLOSE_TOLERANCE NUMBER
RECEIVE_CLOSE_TOLERANCE NUMBER
AUTO_LOT_ALPHA_PREFIX VARCHAR2(30)
START_AUTO_LOT_NUMBER VARCHAR2(30)
LOT_CONTROL_CODE NUMBER
SHELF_LIFE_CODE NUMBER
SHELF_LIFE_DAYS NUMBER
SERIAL_NUMBER_CONTROL_CODE NUMBER
START_AUTO_SERIAL_NUMBER VARCHAR2(30)
AUTO_SERIAL_ALPHA_PREFIX VARCHAR2(30)
SOURCE_TYPE NUMBER
SOURCE_ORGANIZATION_ID NUMBER
SOURCE_SUBINVENTORY VARCHAR2(10)
EXPENSE_ACCOUNT NUMBER
ENCUMBRANCE_ACCOUNT NUMBER
RESTRICT_SUBINVENTORIES_CODE NUMBER
UNIT_WEIGHT NUMBER
WEIGHT_UOM_CODE VARCHAR2(3)
VOLUME_UOM_CODE VARCHAR2(3)
UNIT_VOLUME NUMBER
RESTRICT_LOCATORS_CODE NUMBER
LOCATION_CONTROL_CODE NUMBER
SHRINKAGE_RATE NUMBER
ACCEPTABLE_EARLY_DAYS NUMBER
PLANNING_TIME_FENCE_CODE NUMBER
DEMAND_TIME_FENCE_CODE NUMBER
LEAD_TIME_LOT_SIZE NUMBER
STD_LOT_SIZE NUMBER
CUM_MANUFACTURING_LEAD_TIME NUMBER
OVERRUN_PERCENTAGE NUMBER
MRP_CALCULATE_ATP_FLAG VARCHAR2(1)
ACCEPTABLE_RATE_INCREASE NUMBER
ACCEPTABLE_RATE_DECREASE NUMBER
CUMULATIVE_TOTAL_LEAD_TIME NUMBER
PLANNING_TIME_FENCE_DAYS NUMBER
DEMAND_TIME_FENCE_DAYS NUMBER
END_ASSEMBLY_PEGGING_FLAG VARCHAR2(1)
REPETITIVE_PLANNING_FLAG VARCHAR2(1)
PLANNING_EXCEPTION_SET VARCHAR2(10)
BOM_ITEM_TYPE NOT NULL NUMBER
PICK_COMPONENTS_FLAG NOT NULL VARCHAR2(1)
REPLENISH_TO_ORDER_FLAG NOT NULL VARCHAR2(1)
BASE_ITEM_ID NUMBER
ATP_COMPONENTS_FLAG NOT NULL VARCHAR2(1)
ATP_FLAG NOT NULL VARCHAR2(1)
FIXED_LEAD_TIME NUMBER
VARIABLE_LEAD_TIME NUMBER
WIP_SUPPLY_LOCATOR_ID NUMBER
WIP_SUPPLY_TYPE NUMBER
WIP_SUPPLY_SUBINVENTORY VARCHAR2(10)
PRIMARY_UOM_CODE VARCHAR2(3)
PRIMARY_UNIT_OF_MEASURE VARCHAR2(25)
ALLOWED_UNITS_LOOKUP_CODE NUMBER
COST_OF_SALES_ACCOUNT NUMBER
SALES_ACCOUNT NUMBER
DEFAULT_INCLUDE_IN_ROLLUP_FLAG VARCHAR2(1)
INVENTORY_ITEM_STATUS_CODE VARCHAR2(10)
INVENTORY_PLANNING_CODE NUMBER
PLANNER_CODE VARCHAR2(10)
PLANNING_MAKE_BUY_CODE NUMBER
FIXED_LOT_MULTIPLIER NUMBER
ROUNDING_CONTROL_TYPE NUMBER
CARRYING_COST NUMBER
POSTPROCESSING_LEAD_TIME NUMBER
PREPROCESSING_LEAD_TIME NUMBER
FULL_LEAD_TIME NUMBER
ORDER_COST NUMBER
MRP_SAFETY_STOCK_PERCENT NUMBER
MRP_SAFETY_STOCK_CODE NUMBER
MIN_MINMAX_QUANTITY NUMBER
MAX_MINMAX_QUANTITY NUMBER
MINIMUM_ORDER_QUANTITY NUMBER
FIXED_ORDER_QUANTITY NUMBER
FIXED_DAYS_SUPPLY NUMBER
MAXIMUM_ORDER_QUANTITY NUMBER
ATP_RULE_ID NUMBER
PICKING_RULE_ID NUMBER
RESERVABLE_TYPE NUMBER
POSITIVE_MEASUREMENT_ERROR NUMBER
NEGATIVE_MEASUREMENT_ERROR NUMBER
ENGINEERING_ECN_CODE VARCHAR2(50)
ENGINEERING_ITEM_ID NUMBER
ENGINEERING_DATE DATE
SERVICE_STARTING_DELAY NUMBER
VENDOR_WARRANTY_FLAG NOT NULL VARCHAR2(1)
SERVICEABLE_COMPONENT_FLAG VARCHAR2(1)
SERVICEABLE_PRODUCT_FLAG NOT NULL VARCHAR2(1)
BASE_WARRANTY_SERVICE_ID NUMBER
PAYMENT_TERMS_ID NUMBER
PREVENTIVE_MAINTENANCE_FLAG VARCHAR2(1)
PRIMARY_SPECIALIST_ID NUMBER
SECONDARY_SPECIALIST_ID NUMBER
SERVICEABLE_ITEM_CLASS_ID NUMBER
TIME_BILLABLE_FLAG VARCHAR2(1)
MATERIAL_BILLABLE_FLAG VARCHAR2(30)
EXPENSE_BILLABLE_FLAG VARCHAR2(1)
PRORATE_SERVICE_FLAG VARCHAR2(1)
COVERAGE_SCHEDULE_ID NUMBER
SERVICE_DURATION_PERIOD_CODE VARCHAR2(10)
SERVICE_DURATION NUMBER
WARRANTY_VENDOR_ID NUMBER
MAX_WARRANTY_AMOUNT NUMBER
RESPONSE_TIME_PERIOD_CODE VARCHAR2(30)
RESPONSE_TIME_VALUE NUMBER
NEW_REVISION_CODE VARCHAR2(30)
INVOICEABLE_ITEM_FLAG NOT NULL VARCHAR2(1)
TAX_CODE VARCHAR2(50)
INVOICE_ENABLED_FLAG NOT NULL VARCHAR2(1)
MUST_USE_APPROVED_VENDOR_FLAG NOT NULL VARCHAR2(1)
REQUEST_ID NUMBER
PROGRAM_APPLICATION_ID NUMBER
PROGRAM_ID NUMBER
PROGRAM_UPDATE_DATE DATE
OUTSIDE_OPERATION_FLAG NOT NULL VARCHAR2(1)
OUTSIDE_OPERATION_UOM_TYPE VARCHAR2(25)
SAFETY_STOCK_BUCKET_DAYS NUMBER
AUTO_REDUCE_MPS NUMBER(22)
COSTING_ENABLED_FLAG NOT NULL VARCHAR2(1)
AUTO_CREATED_CONFIG_FLAG NOT NULL VARCHAR2(1)
CYCLE_COUNT_ENABLED_FLAG NOT NULL VARCHAR2(1)
ITEM_TYPE VARCHAR2(30)
MODEL_CONFIG_CLAUSE_NAME VARCHAR2(10)
SHIP_MODEL_COMPLETE_FLAG VARCHAR2(1)
MRP_PLANNING_CODE NUMBER
RETURN_INSPECTION_REQUIREMENT NUMBER
ATO_FORECAST_CONTROL NUMBER
RELEASE_TIME_FENCE_CODE NUMBER
RELEASE_TIME_FENCE_DAYS NUMBER
CONTAINER_ITEM_FLAG VARCHAR2(1)
VEHICLE_ITEM_FLAG VARCHAR2(1)
MAXIMUM_LOAD_WEIGHT NUMBER
MINIMUM_FILL_PERCENT NUMBER
CONTAINER_TYPE_CODE VARCHAR2(30)
INTERNAL_VOLUME NUMBER
WH_UPDATE_DATE DATE
PRODUCT_FAMILY_ITEM_ID NUMBER
GLOBAL_ATTRIBUTE_CATEGORY VARCHAR2(150)
GLOBAL_ATTRIBUTE1 VARCHAR2(150)
GLOBAL_ATTRIBUTE2 VARCHAR2(150)
GLOBAL_ATTRIBUTE3 VARCHAR2(150)
GLOBAL_ATTRIBUTE4 VARCHAR2(150)
GLOBAL_ATTRIBUTE5 VARCHAR2(150)
GLOBAL_ATTRIBUTE6 VARCHAR2(150)
GLOBAL_ATTRIBUTE7 VARCHAR2(150)
GLOBAL_ATTRIBUTE8 VARCHAR2(150)
GLOBAL_ATTRIBUTE9 VARCHAR2(150)
GLOBAL_ATTRIBUTE10 VARCHAR2(150)
PURCHASING_TAX_CODE VARCHAR2(50)
The query is as below
select segment1 from mtl_system_items where organization_id = 100 and inventory_item_id like '123456%'
The explain plan is as below -
Plan
SELECT STATEMENT RULE
     2 TABLE ACCESS BY INDEX ROWID INV.MTL_SYSTEM_ITEMS
          1 INDEX RANGE SCAN NON-UNIQUE INV.MTL_SYSTEM_ITEMS_N1
The INV.MTL_SYSTEM_ITEMS_N1 index is created on
ORGANIZATION_ID and SEGMENT1

Patch for Template type 'excel' in Oracle Apps R 12

Hello,
I don't see the option to upload the excel template in my XML Publisher responsibility. Can any one suggest which patch should be applied to see the excel in the drop down of template type in XML Publisher responsibility
Thanks,
Sridhar

Since this depends on your current patch level I would highly recommend you to
open a ticket with Oracle Support to tell you exactly which patch your environment needs.
A good starting point though is the Note ID 1138602.1. Which gives you all patches for
BIP 10f, 11g, etc standalone or with EBS or other oracle apps.
regards
Jorge
p.s. If this answers your question then please grant the points

Oracle Apps: FND API to navigate all records of a block

Hi,
I have this requirement in Oracle Apps(11.5.10) forms wherein I need to navigate thru all records of a block and perfrom some validation (say some fields are not null for that records). I think there is FND api which does this (navigation + validation) which I dont remember.
Does anyone remember the api name or is it possible at all.
Thanks much.

Hi.
Maybe APP_RECORD.FOR_ALL_RECORDS will be helpful. See Oracle Applications Developer's Guide (release 11 i ), page 29-34
Regards
Tomáš

Oracle Account Receivables Lockbox Error, No ITEM NUM on PAYMENT record type.

Hi,
For "Process Lockbox" program. The program completes normally, but receipts are not created and I am getting below error in log file:-
"AR-ARLFMT: No ITEM NUM on PAYMENT record type."
This error message is similar to error message mentioned in note id (Troubleshooting Known Issues In Lockbox (Doc ID 1366298.1)) :-
2.10. Lockbox ends with error: "AR-ARLFMT: No PAYMENT NUM on PAYMENT record type"
Symptoms
You are trying to run lockbox and receive this error message in the log file:
AR-ARLFMT: No PAYMENT NUM on PAYMENT record type.
Your lockbox interface program has completed successfully, however,there is No Data Found in the AR_PAYMENTS_INTERFACE table.
Solution
Responsibility: Receivables Manager
Navigation: Setup > Receipts > Lockboxes > Transmission Formats
For the Transmission Format name that you are using, make sure that there is a 'Transmission Record' defined and that there is a Transmission Field with a Field Type of 'Record Identifier' defined.
Make sure to include the check number in Transmission Format and Control file
and item number is:-
Item Number: A sequence number that your bank assigns to a specific payment. This number associates an invoice with a receipt.
I am passing item number, but still I am getting this error.
Can anybody please help.
Thanks in advance.
Regards
Gagan Garg

Hi,
For "Process Lockbox" program. The program completes normally, but receipts are not created and I am getting below error in log file:-
"AR-ARLFMT: No ITEM NUM on PAYMENT record type."
This error message is similar to error message mentioned in note id (Troubleshooting Known Issues In Lockbox (Doc ID 1366298.1)) :-
2.10. Lockbox ends with error: "AR-ARLFMT: No PAYMENT NUM on PAYMENT record type"
Symptoms
You are trying to run lockbox and receive this error message in the log file:
AR-ARLFMT: No PAYMENT NUM on PAYMENT record type.
Your lockbox interface program has completed successfully, however,there is No Data Found in the AR_PAYMENTS_INTERFACE table.
Solution
Responsibility: Receivables Manager
Navigation: Setup > Receipts > Lockboxes > Transmission Formats
For the Transmission Format name that you are using, make sure that there is a 'Transmission Record' defined and that there is a Transmission Field with a Field Type of 'Record Identifier' defined.
Make sure to include the check number in Transmission Format and Control file
and item number is:-
Item Number: A sequence number that your bank assigns to a specific payment. This number associates an invoice with a receipt.
I am passing item number, but still I am getting this error.
Can anybody please help.
Thanks in advance.
Regards
Gagan Garg

Record fetch is not correct in oracle apps report

Hi ALL,
i developed report in oracle apps in that i used one customized table which is poulated in after parameter form trigger and used the table in main data model.
when two user fire this report ,data in the report mismatch.
please help me regarding this how to rectified this.
Thanks,
Mack

Hi Mack,
you can add one more column "request_id" in the custom table and populate it along with the report query ouput data. while displaying the data for any particular user/request, use request_id to fetch correct data for the reports.
Regards
Imran

Error: oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation

Hi all,
I am trying to extend the supplier address book site creation controller: ByrCrtStCO and loop inside the processFormRequest method through all the operating unit related sites on that page.
I have the following code:
package XXXX.oracle.apps.pos.supplier.webui;
import java.sql.SQLException;
import java.sql.Types;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.OARow;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.pos.supplier.components.server.ByrAddrAMImpl;
import oracle.apps.pos.supplier.webui.ByrCrtStCO;
import oracle.apps.pos.supplier.webui.SupplierUtil;
import oracle.jdbc.OracleCallableStatement;
import oracle.jbo.RowSetIterator;
import oracle.jbo.Row;
* @author AO *
public class xxxpoByrCrtStCO extends ByrCrtStCO
   //constructor
    public xxxpoByrCrtStCO()
    public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
        //call super to continue the rest of the processing
        super.processFormRequest(oapagecontext, oawebbean);
        //update the supplier site on all records with the vat code
        updateVendorSites(oapagecontext, oawebbean);
    private void updateVendorSites(OAPageContext oapagecontext, OAWebBean oawebbean) {
        OAApplicationModule applicationModule = oapagecontext.getApplicationModule(oawebbean);
        if(oapagecontext.getParameter("applyBtn") != null)
            OAViewObject oaviewobject = (OAViewObject) applicationModule.findViewObject("CrtSitesVO");
              if (oaviewobject != null) {
                                  int count = oaviewobject.getRowCount();
                                  if(oapagecontext.isLoggingEnabled(2))
                                                         oapagecontext.writeDiagnostics(this, (new StringBuilder()).append(" Count: ").append(count).toString(), 2);
                    else {
                        if(oapagecontext.isLoggingEnabled(2))
                                               oapagecontext.writeDiagnostics(this, (new StringBuilder()).append(" Count: ").append("null").toString(), 2);
I get the below error: What could be problem?
Logout
Error Page
Exception Details.
oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT * FROM (select 'N' as select1, substr(:1,1,15) as Site_Name, organization_id, name,:2 as Site_Name_Display from hr_operating_units WHERE mo_global.check_access(organization_id) = 'Y') QRSLT ORDER BY name at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:912) at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1169) at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435) at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:3001) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1885) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:550) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:438) at _OA._jspService(_OA.java:212) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:390) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:911) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:662) ## Detail 0 ## java.sql.SQLException: Missing IN or OUT parameter at index:: 1 at oracle.jdbc.driver.OraclePreparedStatement.processCompletedBindRow(OraclePreparedStatement.java:1752) at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3444) at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3493) at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1491) at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:860) at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:669) at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:3723) at oracle.jbo.server.OAJboViewObjectImpl.executeQueryForCollection(Unknown Source) at oracle.apps.fnd.framework.server.OAViewObjectImpl.executeQueryForCollection(OAViewObjectImpl.java:4560) at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:743) at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:688) at oracle.jbo.server.ViewRowSetImpl.getRowCount(ViewRowSetImpl.java:1932) at oracle.jbo.server.ViewObjectImpl.getRowCount(ViewObjectImpl.java:6011) at xxx.oracle.apps.pos.supplier.webui.xxxpoByrCrtStCO.updateVendorSites(xxxpoByrCrtStCO14.java:85) at xxx.oracle.apps.pos.supplier.webui.xxxpoByrCrtStCO.processFormRequest(xxxpoByrCrtStCO.java:46) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:827) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(OAPageLayoutHelper.java:1205) at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(OAPageLayoutBean.java:1579) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1039) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1005) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:860) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(OAFormBean.java:395) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1039) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1005) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:860) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(OABodyBean.java:363) at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2997) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1885) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:550) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:438) at _OA._jspService(_OA.java:212) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:390) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:911) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:662) java.sql.SQLException: Missing IN or OUT parameter at index:: 1 at oracle.jdbc.driver.OraclePreparedStatement.processCompletedBindRow(OraclePreparedStatement.java:1752) at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3444) at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3493) at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1491) at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:860) at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:669) at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:3723) at oracle.jbo.server.OAJboViewObjectImpl.executeQueryForCollection(Unknown Source) at oracle.apps.fnd.framework.server.OAViewObjectImpl.executeQueryForCollection(OAViewObjectImpl.java:4560) at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:743) at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:688) at oracle.jbo.server.ViewRowSetImpl.getRowCount(ViewRowSetImpl.java:1932) at oracle.jbo.server.ViewObjectImpl.getRowCount(ViewObjectImpl.java:6011) at xxx.oracle.apps.pos.supplier.webui.xxxpoByrCrtStCO.updateVendorSites(xxxpoByrCrtStCO14.java:85) at xxx.oracle.apps.pos.supplier.webui.xxxpoByrCrtStCO14.processFormRequest(xxxpoByrCrtStCO.java:46) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:827) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(OAPageLayoutHelper.java:1205) at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(OAPageLayoutBean.java:1579) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1039) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1005) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:860) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(OAFormBean.java:395) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1039) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1005) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:860) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(OABodyBean.java:363) at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2997) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1885) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:550) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:438) at _OA._jspService(_OA.java:212) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:390) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64) at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26) at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15) at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:911) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313) at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:662)
Logout
Copyright (c) 2006, Oracle. All rights reserved.

Hi all
This is the method I used to update the vendor sites. It takes a list of vendor site IDs retrieved in previous sections and updates one by one. Note the Super method is invoked before this method and another method not mentioned here is used to retrieve the vendor site IDs from the operating unit the user checked.
     private void updateVendorSites(OAPageContext oapagecontext, OAWebBean oawebbean, HashMap<oracle.jbo.domain.Number, String> updateList ) {
        if(oapagecontext.isLoggingEnabled(2))
            oapagecontext.writeDiagnostics(this, "xxXXXXpoByrCrtStCO - updateVendorSites(OAPageContext, OAWebBean).BEGIN", 2);
            System.out.println("xxXXXXpoByrCrtStCO - updateVendorSites(OAPageContext, OAWebBean).BEGIN" );
            try {
            // Initalize variables
            oracle.jbo.domain.Number vendorSiteId = null;
            oracle.jbo.domain.Number orgId = null;
            String vatCode = null;
            // THis is a nested AM, so the view for operating units/sites is not in the root AM. It is in the ByrAddrAM.
               // In order to update the tax code on the newly created supplier site, we need to get the AM and VO for the Tax and Reporting Update Tax code page
            ApplicationModule maintainpartytaxprofilesam = oapagecontext.getRootApplicationModule().findApplicationModule("MaintainPartyTaxProfilesAM");
            SearchSuppAcctSitesVOImpl searchsuppacctsitesvoimpl = (SearchSuppAcctSitesVOImpl) maintainpartytaxprofilesam.findViewObject("SearchSuppAcctSitesVO");
            Set set = updateList.entrySet();
            Iterator i = set.iterator();
            while (i.hasNext()) {
                  System.out.println("xxXXXXpoByrCrtStCO - updateVendorSites Inside while" );
                  Map.Entry<oracle.jbo.domain.Number, String> updateCode = (Map.Entry<oracle.jbo.domain.Number, String>) i.next();
                 // Initialize variables used in the loop to ensure no exchange of data between rows. This is just a precaution.
                 vendorSiteId = null;
                 orgId = null;
                 vatCode = null;
                  System.out.println("xxXXXXpoByrCrtStCO - updateVendorSites before cast org id" );
                 orgId = updateCode.getKey();
                  System.out.println("xxXXXXpoByrCrtStCO - updateVendorSites before cast vatCode" );
                 vatCode = updateCode.getValue();
                 if(oapagecontext.isLoggingEnabled(2))
                   oapagecontext.writeDiagnostics(this, (new StringBuilder()).append(" OrgId: ").append(orgId).toString(), 2);
                  System.out.println(" OrgId: " + orgId.toString());
                  System.out.println(" vatCode: " + vatCode);
                  // Get the vendor site ID from separate method
                  vendorSiteId = getVendorSiteId(oapagecontext, oawebbean, orgId);
                  // Find the row in the ap_supplier_sites_all table for that vendor Site ID.
                  searchsuppacctsitesvoimpl.executeVOQuery (vendorSiteId);
                  SearchSuppAcctSitesVORowImpl searchsuppacctsitesvorowimpl = (SearchSuppAcctSitesVORowImpl)searchsuppacctsitesvoimpl.first();
                  if(searchsuppacctsitesvorowimpl != null)
                      System.out.println("xxXXXXpoByrCrtStCO - updateVendorSites before set vat code" );
                        searchsuppacctsitesvorowimpl.setVatCode(vatCode);
                oapagecontext.getApplicationModule(oawebbean).getTransaction().commit();
          catch (OAException oaEx) {
            throw new OAException(oaEx.getMessage(), (byte)0);

Schema Error with Oracle Apps Adapter

Hi folks,
I'm trying to create a simple BPEL process to call the CREATE_LOCATION API in eBus 11.5.10.2 on a 10g Oracle Database. I'm using jdeveloper 10.1.3.4.
I create the partner link with success, creating the wrapper package due to the record types. I create an invoke and create the variables based on the partner link.
The problem appears when I try to assign data to the Invoke variables, I expand the Invoke Input variable but I only get as far as the payload. If I try a Transform activity I get the message 'Unable to get schema information for target'.
If I open the xsd file it appears to be fine (I'm no expert).
Am I missing a step?
Cheers,
Jason

Kaldiss,
Thanks for your reply.
The XSD file is in the schemas section of the project, it's the one that gets generated when I created the apps adapter.
I've tried remapping the variable to the message type but get the same problem, when I expand it out it I get:
(x) Invoke_OA_C_ERP_L_InputVariable
InputParameters
It won't go any further.
If I open the generated xsd in jdeveloper it looks correct, I see the input and output elements with their sub-compunents along with the record type definitions.
Any more thoughts?
Cheers,
Jason

Oracle Apps adopter - Record type

Similar Messages

Maybe you are looking for