Oracle Client Merge Module

Somebody knows if exists a merge module for Oracle 8i?.
We are deploying an application which uses Oracle 8.1.6 Client with OCI calls between Oracle and Delphi.
We built an installation kit, and we want to install Oracle Client in same setup via merge modules.
Is it posible?
I appreciate some help
Best Regards

Sorry I wasn't sure.... But let me try to give you another idea.
So if you want to protect your schema I suggest to use roles.
I mean collect all schema privileges into two roles.
Set default role for your schema user an almost empty role. (create session)
Plus create a full featured role which is password protected.
So you can implement in your application that when it connects it "SET ROLE" to the full featured one with password of course...
This way only your application can use/see objects in schema...
HTH, Zoltan

Similar Messages

  • Is there any re-distributable Oracle client

    Hi,
    I am development of project that need ODP.NET and Oracle client 9i to be installed with product installation on client machine.I am using Developer install shield 8.0 on windows installer for product installation.
    Is there any oracle client redistributable available using windows installer 2.0 merge modules or msi product?
    One way is to call setup.exe of oracle client from product intallation.I am looking for alternate solution.
    Thanks,
    Jevelson

    I have been looking for something like this for a while, the alternate approach has been to create a response file and call the setup.exe using -silent and -response options

  • Couldn't initialize Oracle client library

    Hi,gurus:
    My IDES4.7 installed windows200 with DB oracle9I,it's ok before. but after i repaired the OS after a vital error, once i started the SAPMMC, first it's yellow, after a wile it's green but later the disp+work.exe turned grey.
    the flowing is the log from dev_w2
    Please do me a favor,thanks a lot.
    trc file: "dev_w2", trc level: 1, release: "640"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M

    B Wed Jul 02 20:28:15 2008
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\HFS\SYS\exe\run\dboraslib.dll' ...
    B  Library 'D:\usr\sap\HFS\SYS\exe\run\dboraslib.dll' loaded
    B  Version of 'D:\usr\sap\HFS\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.220)
    B  New connection 0 created
    M sysno      00
    M sid        HFS
    M systemid   560 (PC with Windows NT)
    M relno      6400
    M patchlevel 0
    M patchno    221
    M intno      20020600
    M make:      multithreaded, ASCII
    M pid        2404
    M
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 2 2404) [dpxxdisp.c   1164]
    I  MtxInit: -2 0 0
    M  DpSysAdmExtCreate: ABAP is active

    M Wed Jul 02 20:28:16 2008
    M  DpShMCreate: sizeof(wp_adm)          13312     (832)
    M  DpShMCreate: sizeof(tm_adm)          2379840     (11840)
    M  DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpShMCreate: sizeof(comm_adm)          192000     (384)
    M  DpShMCreate: sizeof(vmc_adm)          0     (364)
    M  DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 06DE0040, size: 2672144)
    M  DpShMCreate: allocated sys_adm at 06DE0040
    M  DpShMCreate: allocated wp_adm at 06DE17D8
    M  DpShMCreate: allocated tm_adm_list at 06DE4BD8
    M  DpShMCreate: allocated tm_adm at 06DE4C00
    M  DpShMCreate: allocated wp_ca_adm at 07029C40
    M  DpShMCreate: allocated appc_ca_adm at 0702E290
    M  DpShMCreate: allocated comm_adm_list at 0702FA00
    M  DpShMCreate: allocated comm_adm at 0702FA18
    M  DpShMCreate: allocated vmc_adm_list at 0705E818
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 0705E840
    M  DpShMCreate: allocated wall_adm at 0705E848
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 2 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.

    M Wed Jul 02 20:28:17 2008
    M  calling db_connect ...
    C  Prepending D:\oracle\ora92 to Path.
    C  got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
    C  *** ERROR => Couldn't initialize Oracle client library,
    please check your installation!
    [dbsloci.c    2015]
    M  ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1282]
    M  in_ThErrHandle: 1
    M  *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9696]

    M  Info for wp 2

    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <

    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server shining_HFS_00 on host shining (wp 2)
    M  *  ERROR       tskh_init: db_connect
    M  *
    M  *  TIME        Wed Jul 02 20:28:17 2008
    M  *  RELEASE     640
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        9881
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************

    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  255]
    M  Entering ThSetStatError
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 2 2404) [dpnttool.c   357]

    Hello Wang,
    > C *** ERROR => Couldn't initialize Oracle client library,
    Have you also restored / re-installed the oracle client libs on your windows system? It seems like the oracle client libs are missing.
    Regards
    Stefan

  • Client Merge! precautions to be taken from BW point of view

    Hi,
    We are in a process of merging two clients in R/3 which are typical source systems for BW!
    What are the steps that we should take care of while the client merge is on from R/3 side.
    these two clients are ofcourse very important for BW system as almost all for everydata load the extraction logic in FM to the ABAP routine in selection of infopacakge is different!
    in a scenario such as this, what are the things that should i make a note from BW point of view?
    Raj

    Hi,
    1.Internal table with header line will not support in ECC 6.0 for that u need to create internal table and work area using TYPES.
    2.Mostly u need to do some PATCH WORK for the STANDARD programmes.
    Patch work in the sense for SPAU objects in Mysap is there any code written by client(INSERT {....END INSERT....}) this type of code u need to add in ECC 6.0 code....
    3.Mostly u have to resolve EPC(Extended program check) errors.
    In that u will find so many type of errors...Field attribute errors,Perform interface errors,Obsolete stetement errors,....etc.
    4.First thing u need to what r the SCOPE and OUT OF SCOPE in your upgradation.
    5.If u find any Fmodules obsolete...U just press F1 on that Fmodule it will show which function module can useful instead of that obsolete one...
    6.If they want UNI CODE compatiable .....
    EX Report...
    Go to the attributes of the report...
    There u can c a check box to check UNI CODE Errors...
    U have to resolve these errors also...
    After doing all these things u have to show 0 errors on CODE INSPECTOR fro each n every object...
    Thats t as per my knowledge...
    Regards,
    Kishore Reddy.

  • What are the softwares that I need to learn Oracle Apps- Financial module?

    Hi All,
    I'm a PL/SQL developer and supposed to learn Oracle Apps - Financial Module from Technical perspective as a part of my new job requirement. So, could you please help me figure out the softwares required to start learning Oracle Apps. ?
    I think, I need servers and clients of E-Business Suite & RDBMS (10 g or 11g). I'm afraid whether 200GB of free disk- space & 3 GB RAM on my Desktop may not be sufficient if I install both servers & Clients.
    So, please suggest the essential components of E-business Suite and RDBMS I should get to start learning Financial Module considering the above limitation.
    All suggestions are welcomed!
    Regards,
    MK

    Hi Mk;
    I'm a PL/SQL developer and supposed to learn Oracle Apps - Financial Module from Technical perspective as a part of my new job requirement. So, could you please help me figure out the softwares required to start learning Oracle Apps. ?You need to E-Business Suite r11 or r12 version
    I think, I need servers and clients of E-Business Suite & RDBMS (10 g or 11g). I'm afraid whether 200GB of free disk- space & 3 GB RAM on my Desktop may not be sufficient if I install both servers & Clients.
    So, please suggest the essential components of E-business Suite and RDBMS I should get to start learning Financial Module considering the above limitation.When u make EBS installation(DEMO which comes wiht data), db will be create automaticly. For You can make installation on external disk wiht VMware option. For installation steps-installlation files-stage,require disk size etc.. check my blog
    http://heliosguneserol.wordpress.com/category/step-by-step-oracle-e-business-suite-installation/
    There is also DEMO instance avaliable on below link
    www.solutionbeacon.com
    Regard
    Helios

  • Oledb and path length - Oracle client and networking components ...

    Hello,
    I've been suddenly getting the
    "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation."
    error when trying to connect to an oracle 9.2 database using the msdaora oledb provider.
    "..ora92/bin" is in my PATH environoment variable and the hints about setting read and execute permissions on the ..ora92/bin direction didn't work for me. However, what did do the trick, was reducing the length the PATH environement variable to under 182 characters.
    Anybody else seen this that can explain what's gonig on here?
    Erik

    Hello Kamal,
    Thanks for your reply
    My system looks like this:
    OS: MS Windows XP Professional Service Pack 2
    msdaora version: 2.81.1117.0
    This problem has only recently surfaced, but has now appeared on at least two other systems as well as my own. Any system changes must have happened on all three systems. I have "automatic updates" setup on my computer and they maybe setup on the other computers - could the be responsible for breaking oledb?
    Other things I have tried:
    The Oracle Oledb provider is also not working. It gives me the error:
    "OraOLEDBpus.dll: the specified module could not be found"
    When I reduce the size of the PATH variable it works too.
    I am always able to run executables from the ../ora92/bin directory. So the path is only being wrongly interpreted by the Oledb providers.
    Erik

  • Error when upgrade Oracle client 9.2.0.5.0 to 9.2.0.5.3

    Hi all,
    I'm new with Oracle community so I hope you guys can help me and give me some suggestion with my case.
    I got an error when upgrade Oracle client 9.2.0.5.0 to 9.2.0.5.3
    I tried many times but can’t do upgrade successfully
    This the error message I got when doing the job:
    [ http://picasaweb.google.com/hoagao84/Oracle#5443442931867670386]
    Appreciate your help.
    Log files:
    Command arguments are: apply
    OPatch version is: 1.0.0.0.48
    Using ORACLE_HOME/oui to look up oui libs...
    Oracle Home = d:\oracle\ora92
    Location of Oracle Inventory = D:\oracle\ora92\inventory
    Oracle Universal Installer shared library = D:\oracle\ora92\oui\lib\win32\oraInstaller.dll
    Path to Java = "D:\oracle\ora92\jdk\jre\bin\java.exe"
    Location of Oracle Inventory Pointer = N/A
    Location of Oracle Universal Installer components = D:\oracle\ora92\oui
    Required Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
    Checking if this is a RAC system...
    Accessing inventory... This may take up to 300 seconds.
    (retry 10 times, delay 30 seconds each time)
    System Command: ""D:\oracle\ora92\jdk\jre\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -classpath "D:\oracle\ora92\oui\jlib\OraInstaller.jar;D:\oracle\ora92\oui\jlib\srvm.jar;D:\oracle\ora92\opatch\jlib\opatch.jar;D:\oracle\ora92\oui\jlib\xmlparserv2.jar;D:\oracle\ora92\oui\jlib\share.jar;.:D:\oracle\ora92\jlib\srvm.jar" opatch/O2O "d:\oracle\ora92" "D:\oracle\ora92\oui" opatch.pl 1.0.0.0.48"
    Result:
    output to OPatch:
    IS_CLUSTER=0
    CHECK_CLUSTER=1
    NODE_LIST=NULL
    NODE_COUNT=0
    LOCAL_NODE=NULL
    IS_CFS=0
    RAC_CODE=0
    HOME_INDEX=1
    This is not a RAC system
    Interim Patch ID: 3738339
    Checking the patch inventory.
    Component Name: oracle.rdbms
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.rdbms_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.oracore_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.xdk_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.dbjava_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.java.javavm.javatools
    Component Version: 9.2.0.5.0
    Component Name: oracle.cartridges.context
    Component Version: 9.2.0.5.0
    Component Name: oracle.cartridges.locator
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.net_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.ldap_rsf
    Component Version: 9.2.0.5.0
    Component Name: oracle.emprod.oemagent.base_oemagent
    Component Version: 9.2.0.5.0
    Component Name: oracle.isearch.is_common
    Component Version: 9.2.0.5.0
    Component Name: oracle.options.olap.cwmlite
    Component Version: 9.2.0.5.0
    Component Name: oracle.rsf.nlsrtl_rsf
    Component Version: 9.2.0.5.0
    Bugs fixed by this patch 3738339:
    3741539 : LOGICAL STANDBY FAILS ORA-1422 MERGING PARTITIONS WITH LOB COLUMN
    2800494 : KCBZIB XHINT FORCES SINGLE BLOCK READS INADVERTENTLY FOR SINGLE INSTANCE
    3239873 : EXTREMELY HIGH PARSING TIMES WITH AND BETWEEN IN ORACLE 9.2.0
    2918138 : ORA-600 (KOHDTF048) WHEN USING PIPELINED PL/SQL TABLE FUNCTIONS
    3575743 : 2004-S144E
    3554319 : APPSST; ORA-00600 [KQLUDP2] RUN DURING APPS UPGRADE
    3666502 : ORA-00600 [1236] RANDOMLY OCCURING
    3752406 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5 FOR BUGS LISTED BELOW
    3528282 : 2004S075E
    3412818 : REPEATED MESSAGES IN LGWR TRACE
    2690205 : 2003-S190E
    3543125 : 2004-S089E
    3571233 : 2004-S141E
    3458446 : 2004S059E
    2810394 : LNXN2PD RETURNS SCALE OF 42 WHEN COVERTING ORACLE NUMBER 0. TO PACKED
    3323435 : 2003-S126E
    3356103 : ORA-600 [OPIBND0; OACCSID] IN PARALLEL QUERY SERVER P001 EXECUTING OLAP QUERY
    3668224 : CBO CALCULATE LOWER CMPTD CDN AND LEADS TO BAD EXECUTION PLAN.
    3492040 : ORA-600 [KGHFRF1] SELECTING FROM V$LOGMNR_CONTENTS
    3150750 : SM; (DBMS_STATS/AUTO_SAMPLE_SIZE) ESTIMATED NDV IS WRONG WITH HIGH SKEWS
    3566469 : 2004-S138E
    3320622 : 2003-S191E
    3749394 : SCORE() FOR FUZZY TEXT OPERATOR DIFFERENT FOR FUNCTIONAL VERSUS INDEX ACCESS
    3609791 : PSR 9.2.0.5.0 BREAKS CALL DB2 STORED PROCEDURE WITH DECIMAL PARM. SQLCODE -310
    3698501 : CGS/IMR GENERATES SAME SEQ/INCARNATION NUMBER AFTER RECONFIG
    3668572 : ORA-979 WHEN CURSOR_SHARING=FORCE OR SIMILAR
    3179637 : UNABLE TO CREATE AN ORACLECONTEXT ON AD UNDER A CHILD DOMAIN
    3571226 : 2004-S140E
    3240280 : JOBS SUDDENLY STOP ALTHOUGH NEXT_DATE <= SYSDATE
    2964252 : LPX-00252 WHEN PARSING VALID XML / DTD FILE
    3617519 : TRANSFORMATION FAILING WITH ORA-932 INCONSISTENT DATATYPE
    3172282 : ORACLE CORE DUMPS WHEN TRY TO LIST ALL ACES FOR A SPECIFIC ACL
    3637624 : WRONG RESULTS WITH DISTINCT COUNT AND UNNESTED EXISTS SUBQUERY
    3542588 : SAME EVENT 38041 USED FOR BUG FIXES 3444115 AND 3131551
    3358490 : ORA-00600 [KQSCCCK;1],[],[],[],[],[],[],[]
    3177513 : WRONG PLAN - JOIN NOT AVOIDED USING BITMAP JOIN INDEX IF UNIQUE INDEX TOO
    3509265 : SHUTDOWN DID NOT COMPLETE WITH WAITING FOR INSTANCES TO LEAVE; 2
    3516951 : BAD EXECUTION PLAN WITH MERGE JOIN CARTESIAN IN TEMP TABLE
    2954891 : ORA-600 KJMXMPM;DIFFUS], [990307644], [990307644], [3304659678]
    3388633 : LOGICAL STANDBY APPLY STOPPED WITH ORA-00600; [17090]
    3371796 : EXPLAIN PLAN HANGS ON KKORMINL
    3622875 : ORA-1499 AND ANALYZE TABLE VALIDATE STRUCTURE CASCADE ONLINE
    3412136 : BAD EXECUTION WITH MERGE JOIN CARTESIAN IN ORACLE 9.2.0.4 AND MERGEFIX 3363655
    3540576 : 2004-S083E
    3575747 : 2004-S145E
    3566813 : CTAS WITH UNION ALL AND ORDER BY RESULTS IN ORA-3113
    3811906 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5
    2824035 : FXD; ORA-22921 CAUSING 4 DIFS IN LRGXG2.
    3354470 : 2003-S195E
    3518909 : UGA MEMORY NOT RELEASED AFTER USING XMLPARSER
    3617042 : BAD PLAN FOR SCH-XMLTYPE BASED WITH COLLECTIONS MAPPED TO OCT
    3583686 : MEMORY ALLOCATION ERROR DURING SPATIAL QUERY
    3597640 : MERGE LABEL REQUEST ON TOP OF 9.2.0.5.0
    3559212 : WRONG RESULTS RETURNED WITH 9.2.0.4 AND CBO
    3625370 : CGS/IMR RECONFIGURATION GOT HUNG DURING A NEW MEMBER JOINING
    3475932 : CROSS INSTANCE ARCHIVE LOG NOT GENERATED REMOTELY
    3635177 : PSRC; ORA-7445 [KXCCUIN] POSSIBLE FROM DML
    3430832 : ORA-600 [25012] AFTER CREATE OF INDEX ONLINE PARALLEL ON PART TABLE
    2338704 : FXD; 1; QUERIES ON COLLECTIONS STORED IN OUT-OF-LINE TABLES ARE NOT VIEW MERGED
    3253770 : 9I-GSI-CRITICAL PROGRAMS TIME OUT WAITING FOR LIBRARY CACHE PIN
    Reading patch XML files and doing sanity checks.
    Read the command to action file map.
    Performing initial safety check.
    Checking active processes:
    Accessing inventory... This may take up to 300 seconds.
    (retry 10 times, delay 30 seconds each time)
    System Command: ""D:\oracle\ora92\jdk\jre\bin\java.exe" -Dopatch.retry=10 -Dopatch.delay=30 -classpath "D:\oracle\ora92\oui\jlib\OraInstaller.jar;D:\oracle\ora92\oui\jlib\srvm.jar;D:\oracle\ora92\opatch\jlib\opatch.jar;D:\oracle\ora92\oui\jlib\xmlparserv2.jar;D:\oracle\ora92\oui\jlib\share.jar;." opatch/CheckConflict "D:\oracle\ora92\oui" "d:\oracle\ora92" opatch.pl 1.0.0.0.48 3738339 "3253770 2338704 3430832 3635177 3475932 3625370 3559212 3597640 3583686 3617042 3518909 3354470 2824035 3811906 3566813 3575747 3540576 3412136 3622875 3371796 3388633 2954891 3516951 3509265 3177513 3358490 3542588 3637624 3172282 3617519 2964252 3240280 3571226 3179637 3668572 3698501 3609791 3749394 3320622 3566469 3150750 3492040 3668224 3356103 3323435 2810394 3458446 3571233 3543125 2690205 3412818 3528282 3752406 3666502 3554319 3575743 2918138 3239873 2800494 3741539 " C:\TEMP\patch92053\3738339\etc\config\actions"
    Result:
    d:\oracle\ora92\opatch\opatch.pl version: 1.0.0.0.48
    Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved.
    Error in executing Java program to check conflict
    ERROR: OPatch failed during pre-reqs check.

    This is all the message when I run command in CMD prompt.
    C:\temp\patch92053\3738339\perl d:\oracle\ora92\opatch\opatch.pl apply
    Opatch Version 1.0.0.0.48
    Perl Version 5.008007
    Oracle Home = d:\oracle\ora92
    Location of Oracle Inventory = D:\oracle\ora92\inventory
    Oracle Universal Installer shared library = D:\Oracle\ora92\oui\lib\win32\oraInstaller.dll
    Path to Java = "D:\oracle\ora92\jdk\jre\bin\java.exe"
    Location of oracle Inventory Pointer = N/A
    Location of Oracle Universal Installer components = D:\Oracle\ora92\oui
    Require Jar File under Oracle Universal Installer = jlib\OraInstaller.jar
    The filename, directory name, or volume label syntax is incorrect.
    D:\oracle\ora92\opatch\opatch.pl version 1.0.0.48
    Copyright (c) 2001,2002,2003 Oracle Corporation. All Rights Reserved
    Error in executing Java program to check conflict
    Error: Opatch failed during pre-reqs check.

  • Oracle 9i and Oracle Client 7x

    We upgraded our database software from 7.3.4 to 9i. The application we are using is the Viking Development System and is still a 16-bit application.
    I was able to get certain parts of the program to work on a variety of workstations (95, 98 and 2000), but on each workstation there are pieces that do not work.
    Here is some of the errors...
    When I try to post the donation transactions, I get the following error messages. A general Protection fault occurred in module sql16w95.dll at 0001:139F
    I have renamed the file to sql16w95.dll to sql16w95.old as suggected in bug 2171024.
    Now the following message appears...
    Unable to load VIP DIctionary Status=3113
    There is also a problem with the lookup screen. The actual database information is OK. But it shows some pledge balances are incorrect. They show the balance as being 14.717 instead of 177.17 for example.
    I need a solution to these problems.
    Any ideas would be appreciated.
    Thanks
    Mark
    We are running a 16bit application (Viking Development System) using an Oracle 7 client on a 9i database.

    If you want to make sure the application connecting through oracle client
    set the pah variable
    Enter
    C:>path
    Oracle bin directories will be displayed along with other variables.see which oracle version comes first.
    If it is 10g then the Oracle will use 10g client to establish conneciton but if 9i installation is displayed first then it is going to use 9i client
    To change 10g as default client
    you can set it 2 ways
    Right click my computer>properties?advance tab--click environement variables
    select PATh variable..
    OR
    launch Oralce universl installer
    click installed products
    click environment tab
    Select the 10g home and click the UPWARD arrow at the right hand side to make Oracle 10g as default client
    You can see oracle bin directories.Just cut the Oracle 10g installation with bin and paste in front of all the variable in the PATH value

  • Oracle client 32 bit version

    Hello! I installed PHP+Apache on HP-UX IA. The one PHP extension module oci8.sl requires 32 bit version library of libclntsh.so.9.0. But on this site only 64 bit version of Oracle client 9.2.0 for HP IA64. Where I can find 32 bit version for IA?

    MetaLink ..... ?

  • Crystal report merge module

    Hi Members,
    We have an application developed in Visual Basic6, MSAccess(Datastorage) and Crystal Reports11 (for reporting), and working fine since years.
    Now, we have developed the same application using Labview 7.1.
    We are using Crystal Reports Ver.11 for report generation, and working fine. (Had to do this because we have invested a lot of $ for Crystal Reports.)
    Now we want to distribute the software to our customers by giving them the setup. We are sucessfully able to generate the setup of Labview application and working fine on the customer PC, but it gives problems when generting reports on the customer's PC. We studied the documentation of Crystal reports, and found that they have Merge modules that needs to be included in the Setup. We have done it sucessfully in VB6, using MS-Installer, because they support including .MSM files directly.
    We would like to know, how we can include those .MSM files of crystal reports in Labview Application builder, 
    or 
    how to include these .MSM files into our setup cd that is to be given to our customer.
    Thanking you,
    with best regards from,
    Kiran V Sutar
    Mumbai, INDIA.
    P.S. : I have also posted this question on other forum at : http://forums.lavag.org/Crystal-Report-t13349.html
    I hope this does not offend anybody, Since I am desparate to get a solution to this.

    Sorry for the late reply. Just got back from work. I asked the previous developer. They told me they're using .NET to call the Crystal Report 2013 in VF. Yes we use the SAP Crystal Reports Developer Version for Visual Studio.NET. When i check they reference this C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.CrystalReports.Engine.dll. Back from my previous concern.
    My concern is when i'm going to deploy my application to my client.Will it work if i'm going to add the merge module file to my package from this link SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads? Because it say its for Visual Studio and Framework 4.0.
    Do i really need to change my target framework to 4.0 in VS2010 and add the framework 4.0 dependency in my package?
    Thank you for your reply......

  • Crystal Reports XI - Where to find the Merge Module and the Install Shield?

    Hi,
    I'm using CR XI with Delphi 2006 and I'm having problems with the client side instalation of the program.They say I have to install the Merge Modules through an Install Shield programs.
    Where to find this and how to use?
    Thanks!

    Hi,
    Install shield is a part of MS Windows not with the BusinessObjects so I was not able to find any BO document on it.
    I have searched over the internet and found some useful links about Install Shield for Windows:
    http://gormanonline.com/blogs/msidle/archive/2008/05/02/basic-introduction-to-installshield-and-windows-installer.aspx
    http://en.wikipedia.org/wiki/InstallShield
    Microsoft Windows includes registry-activated logging services to help diagnose Windows Installer issues. This article describes how to enable this logging service.
    Open the registry with Regedt32.exe and create the following path and keys:
    HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer
    Reg_SZ: Logging
    Value: voicewarmup
    You can use this example:
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftwindowsInstaller]
    u201CLoggingu201D=u201Dvoicewarmupu201D
    The letters in the value field can be in any order. Each letter turns on a different logging mode. Each letteru2019s actual function is as follows for MSI version 1.1:
    v Verbose output
    o Out-of-disk-space messages
    i Status messages
    c Initial UI parameters
    e All error messages
    w Non-fatal warnings
    a Start up of actionsr Action-specific records
    m Out-of-memory or fatal exit information
    u User requests
    p Terminal properties
    + Append to existing file
    ! Flush each line to the log
    u201Cu201D - Wildcard, log all information except for the v option. To include the v option, specify u201C/lvu201C.
    Once activated, the log files that are generated may be found in your %TEMP% directory.
    Hope this will give you a clarification about Installation Shield for Windows.
    Regards,
    Deepti Bajpai

  • Problem with the clientinstallation runtime and merge module

    I'm using CR XI SP4 and as a data source I use a XML file that was defined
    with a XSD.
    From my application I generate a XML file and start CR through a Delphi
    component.
    As a parameter I supply a RPT file without data.
    That's all working.
    Now I want to start my application on a client. Therefore I have created a
    MSI file from the 4 Merge files of SP4 and run the installation on the
    client.
    Used merging modules of SP4 :
    1.      CrystalReports11_5_RDC_Designtime.msm
    2.      CrystalReports11_5_RDC_License.msm
    3.      CrystalReports11_5_RDC_Reportengine.msm
    4.      CrystalReports11_5_RDC_Runtime.msm
    Then the program crashes with a Windows error.
    If I save the Data in the report it works. The data ist not up to date then.
    If I install a complete CR XI it works, even when there is no data in the
    report.
    The data ist diplayed correctly.
    What am I doing wrong?
    What do I have to install on the client to make it work?
    Thanks in advance for your quick help.
    Greetings Martin Weißenborn

    Hello Martin,
    Please post this query to the [.NET Development - Crystal Reports|SAP Crystal Reports, version for Visual Studio;  forum:
    That forum is monitored by qualified technicians and you will get a faster response there.
    Also, all Crystal Reports .NET Development queries remain in one place and thus can be easily searched in one place.
    Thanks a lot,
    Falk

  • Merge Modules X Service Packs

    Post Author: marciocallejon
    CA Forum: Deployment
    Hi,
    I've been developing applications using Crystal Reports Developer 9.0 with .Net 2005 for a long time.
    At the development machine, I installed the service pack 7.0 and it works fine, but, when I try to deploy the application, using the lastest merge modules, the application crashes.
    Comparing the files between the development machine and the client machine, I checked that the files of the merge modules are out of date. If I copy the files manually the aplication starts to work fine too.
    Now I ask, how to find the lastest merge modules syncronized with the lastest service packs ?
    Thanks, Marcio

    Hello Saurabh!
    Thanks for the information!
    That helps a lot, but I still have a doubt:
    I'd like to know if I can deploy an application which was created on CR XI R2(no service packs or Service pack < than the client) on a client computer which has CR R2 SP6 runtime installed.

  • Merge modules for Business Objects XI service pack 4

    I am in the process of developing a deployment package in Installshield 2009 - Basic MSI Project.  I tried adding the merge modules I downloaded earlier from the web page, http://support.businessobjects.com/downloads/runtime.asp
    Currently I do not see this web page.  It would be nice if you could tell me whether do we have a merge module for Crystal Reports XI service pack 4.  If we have where from i can download them.  Thank you

    Thanks a lot for the immediate response.  However, I am not using the crystal reports Version, R2 release.
    I had actually installed Business Object XI and applied service pack 4 on it.  I checked the version in Help->About. It is 11.0.0.  
    Also my environment is XP Sp2, Visual studio 2003 and Visual studio 6.0.  I understand that R2 release is needed if the environment is Visual Studio 2005.
    I would like to give a clear picture of the issue I work through.    
    After deploying the software in the client machine, I came to know that  when client tried to print the embedded crystal report (.dsr file) from CrViewer, 
    1. Page set-up dialog bog gets displayed.
    2. After clicking 'OK' button in the page set-up dialog box, nothing happens.  It is suppose to bring print dialog.
    I simulated this in my development machine (confirmed that Print dialog is is not getting displayed when 'OK' button is clicked from 'Page setup' dialog)
    I researched and found out from some web page that if Business Objects XI is updated to Service pack 4, this issue gets resolved
    So i applied service pack 4 in my dev. machine and tested the functionality by clicking 'OK' button.  This issue is no more.
    Next logical step is to propagate the sp4 changes to the installer.  I searched for the merge modules corresponding to Business Objects XI - service pack 4.  I could not locate it now.
    I searched my backup folder,  I located some previously downloaded merge modules downloaded from  the web page, http://support.businessobjects.com/downloads/runtime.asp
    I tried to include these merge modules and received an error message "Internal build error" .  My research revealed that inclusion of the merge module,  CrystalReports11_RDC_Reportengine.msm  (43,306 Kb, 7/4/2007) throws "Internal build error"  during compilation of MSI project in Installshield 2009.
    Any idea, tips and help to resolve the issue would be appreciated.  Thank you.

  • Merge module and additional directories

    I am trying to install crystal runtime on a client machine.
    I am using the CrystalReports11_5_NET_2005.msm merge module.
    I have opened the module using orca and set InstallViewerVirtualDir to 0 in the property table and the moduleconfiguration table. ( and of course set my key )
    I put the merge module into my installation package and ran the install.
    I am getting a bunch of subdirectories I do not need. ( I am not running the reports from the html viewer )
    The subdir's are css, html, images, js, and prompting.
    I downloaded the latest stuff as far as i can tell ( crxir2_fp44_net_mm.zip )
    How can I turn off the installation of these files.

    I don't know if you really understand yet.
    Nothing in my application nothing at all uses the html css, etc.. files.
    The report server does not.
    My application does not.
    If i was calling the report server to display my reports, i could understand. Or if I was viewing the reports in my application in the html viewer. But I am not.
    The report server ( it is a web service - my web service nothing to do with your report servers) only opens the rpt file and gets information from them to give to my windows form app ( it never displays a single report ).
    My windows app does view the report. But it does so in the activex control. Not in the web control. It does not need the cab files from the server, everything is installed during setup.
    I don't care if you install every dll you guys make on my clients computer.
    Dll's are understandable, and can't be messed with and clients understand. What I don't like is have 5 or so folders under my windows forms application that contains css, html and image files.
    These are just messy and un-needed. Plus more update headaches.
    I guess this is really not a big issue.
    I just don't understand why a windows forms app has to include all the html files that a web application would need.
    Oh well the install does work, and I am not going to go through all the mess that I have had in the past trying to figure out which dlls need to be copied and registered like I have had to do for years. So I guess it is better than it used to be, even if my computer is cluttered with useless files.
    I hope I don't sound mad, because I am not. I have used CR for 10+ years now, and I like the product. I just would like to see some improvements on the msm.
    Thanks for your response.
    I really do appreciate it.

Maybe you are looking for

  • How to execute logical expression in JEP?

    Hi guys, I have a logical expression like, (5>3) AND (6>8) OR (7==7) Now how execute the above expression using JEP(JAVA Expression Parser)? can anyone help me? --Subbu                                                                                  

  • Please see the log for more details.... where to find the log???

    Hi everyone, I have a WebI document in our DEV environment that I am trying to transport to PROD. When I try I get the message: Commit Status=Commit attempted and failed., Promotion Status=Failure : Object  has failed to promote. Please see the log f

  • Prompt user to save change before abnormally closing the application

    Hi, I've some trouble prompting user to save change before abnormally closing the application (logging off, shutdownding machine...). I tried to use Runtime.getRuntime().addShutdownHook() and it doesn't seem to work. Here's part of my code. Help plea

  • Mm-dd-yyyy in expression ssis

    hi i need to user date like 03-31-2015 in my ssis expression for file. how to do it in expression builder

  • Why does Adobe Photoshop CS6 continually ask me to register?

    Adobe Photoshop CS6 continually asks me to register.  I go to the weblink provided, find my information already there, and then try and exit.  This happens often, maybe once a week.  What can I do to make sure that Photoshop CS6 remembers that I have