Oracle EBS 11i - Cloning failing while running 'perl adcfgclone.pl dbTier
Hi DBAs/Experts
I am trying to clone the Oracle 11i (11.5.10.2 with RUP6) all single node on RHEL 4.6. I was following the metalink note 230672.1.
I ran adpreclone scripts successfully on the dbTier and appsTier. Shutdown the Apps & DB. Moved over the file system (whole /u01) which include all the homes ,tops and datafiles from source to target.
While running 'perl adcfgclone.pl dbTier' , I am getting following errors. I didn't check any pre-requisite patches for Rapid Clone as the EBS was already up-todate with RUP6. (How can I verify if the system is on RUP6 in case I have to double check it).
------------------ Error Message -------
adlnkoh.sh started at Thu Feb 26 21:55:55 EST 2009
logfile located in /u01/app/oracle/visdb/9.2.0/install/make.log
Error while running adlnkoh.sh. Please check logfile
.end std out.
/u01/app/oracle/visdb/9.2.0/appsutil/install/adlnkoh.sh: line 198: /u01/app/oracle/visdb/9.2.0/bin/sqlplus: No such file or directory
.end err out.
StackTrace:
/u01/app/oracle/visdb/9.2.0/install/make.log
mv -f /u01/app/oracle/visdb/9.2.0/bin/oracleO /u01/app/oracle/visdb/9.2.0/bin/oracle
make: [u01/app/oracle/visdb/9.2.0/rdbms/lib/oracle] Error 1 (ignored)
mv -f /u01/app/oracle/visdb/9.2.0/bin/oracle /u01/app/oracle/visdb/9.2.0/bin/oracleO
mv: cannot stat `/u01/app/oracle/visdb/9.2.0/bin/oracle': No such file or directory
make: [ioracle] Error 1 (ignored)
mv /u01/app/oracle/visdb/9.2.0/rdbms/lib/oracle /u01/app/oracle/visdb/9.2.0/bin/oracle
mv: cannot stat `/u01/app/oracle/visdb/9.2.0/rdbms/lib/oracle': No such file or directory
make: [ioracle] Error 1 (ignored)
chmod 6751 /u01/app/oracle/visdb/9.2.0/bin/oracle
chmod: cannot access `/u01/app/oracle/visdb/9.2.0/bin/oracle': No such file or directory
make: [ioracle] Error 1 (ignored)
Completed...
/u01/app/oracle/visdb/9.2.0/bin/oracle did not relink properly.
Please review relink errors in this log file
Please help me with your expert advises to resolve the issue.
Thanks
-Samar
Edited by: user4314207 on Mar 4, 2009 8:09 PM
Edited by: user4314207 on Mar 5, 2009 9:18 AM
running genclntsh...
basename: too few arguments
Try `basename --help' for more information.
cp: missing file argument
Try `cp --help' for more information.
cp: cannot stat `/DISCARD/': No such file or directory
ar: creating /u01/app/oracle/visdb/9.2.0/lib/libclntst9.a
Created /u01/app/oracle/visdb/9.2.0/lib/libclntst9.a
rm -f oracle mig dbv tstshm maxmem orapwd dbfsize cursize genoci extproc extproc32 hsalloci hsots hsdepxa dgmgrl dumpsga mapsga osh sbttest imp exp sqlldr rman avmurout avmping avligmsg avmumon nid /u01/app/oracle/visdb/9.2.0/rdbms/lib/ksms.s /u01/app/oracle/visdb/9.2.0/rdbms/lib/ksms.o
Starting: "make -if /u01/app/oracle/visdb/9.2.0/rdbms/lib/ins_rdbms.mk install"
chmod 755 /u01/app/oracle/visdb/9.2.0/bin
rm -f oracle mig dbv tstshm maxmem orapwd dbfsize cursize genoci extproc extproc32 hsalloci hsots hsdepxa dgmgrl dumpsga mapsga osh sbttest imp exp sqlldr rman avmurout avmping avligmsg avmumon nid /u01/app/oracle/visdb/9.2.0/rdbms/lib/ksms.s /u01/app/oracle/visdb/9.2.0/rdbms/lib/ksms.o
- Linking Oracle
rm -f /u01/app/oracle/visdb/9.2.0/rdbms/lib/oracle
gcc -o /u01/app/oracle/visdb/9.2.0/rdbms/lib/oracle -L/u01/app/oracle/visdb/9.2.0/rdbms/lib/ -L/u01/app/oracle/visdb/9.2.0/lib/ -L/u01/app/oracle/visdb/9.2.0/lib/stubs/ -Wl,-E `test -f /u01/app/oracle/visdb/9.2.0/rdbms/lib/skgaioi.o && echo /u01/app/oracle/visdb/9.2.0/rdbms/lib/skgaioi.o` /u01/app/oracle/visdb/9.2.0/rdbms/lib/opimai.o /u01/app/oracle/visdb/9.2.0/rdbms/lib/ssoraed.o /u01/app/oracle/visdb/9.2.0/rdbms/lib/ttcsoi.o /u01/app/oracle/visdb/9.2.0/lib/nautab.o /u01/app/oracle/visdb/9.2.0/lib/naeet.o /u01/app/oracle/visdb/9.2.0/lib/naect.o /u01/app/oracle/visdb/9.2.0/lib/naedhs.o /u01/app/oracle/visdb/9.2.0/rdbms/lib/config.o -lserver9 -lodm9 -lskgxp9 -lskgxn9 -lclient9 -lvsn9 -lwtcserver9 -lcommon9 -lgeneric9 /u01/app/oracle/visdb/9.2.0/rdbms/lib/defopt.o -lknlopt `if /usr/bin/ar tv /u01/app/oracle/visdb/9.2.0/rdbms/lib/libknlopt.a | grep xsyeolap.o > /dev/null 2>&1 ; then echo "-loraolap9" ; fi` -lslax9 -lpls9 -lplp9 -lserver9 -lclient9 -lvsn9 -lwtcserver9 -!
lcommon9 -lgeneric9 -lknlopt -lslax9 -lpls9 -lplp9 -ljox9 -lserver9 -locijdbcst9 -lwwg9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `if /usr/bin/ar tv /u01/app/oracle/visdb/9.2.0/rdbms/lib/libknlopt.a | grep "kxmnsd.o" > /dev/null 2>&1 ; then echo " " ; else echo "-lordsdo9"; fi` -lctxc9 -lctx9 -lzx9 -lgx9 -lctx9 -lzx9 -lgx9 -lordimt9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lsnls9 -lunls9 -lxsd9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lun!
ls9 -lnls9 `cat /u01/app/oracle/visdb/9.2.0/lib/sysliblist` !
-Wl,-rpa
th,/u01/app/oracle/visdb/9.2.0/lib:/lib/i686:/lib:/usr/lib -lm `cat /u01/app/oracle/visdb/9.2.0/lib/sysliblist` -ldl -lm `test -f /u01/app/oracle/visdb/9.2.0/rdbms/lib/skgaioi.o && echo -laio`
/usr/lib/gcc/i386-redhat-linux/3.4.6/libgcc_s.so: undefined reference to `dl_iterate_phdr@GLIBC_2.2.4'
collect2: ld returned 1 exit status
make: [u01/app/oracle/visdb/9.2.0/rdbms/lib/oracle] Error 1 (ignored)
mv -f /u01/app/oracle/visdb/9.2.0/bin/oracle /u01/app/oracle/visdb/9.2.0/bin/oracleO
mv: cannot stat `/u01/app/oracle/visdb/9.2.0/bin/oracle': No such file or directory
make: [ioracle] Error 1 (ignored)
mv /u01/app/oracle/visdb/9.2.0/rdbms/lib/oracle /u01/app/oracle/visdb/9.2.0/bin/oracle
mv: cannot stat `/u01/app/oracle/visdb/9.2.0/rdbms/lib/oracle': No such file or directory
make: [ioracle] Error 1 (ignored)
chmod 6751 /u01/app/oracle/visdb/9.2.0/bin/oracle
chmod: cannot access `/u01/app/oracle/visdb/9.2.0/bin/oracle': No such file or directory
make: [ioracle] Error 1 (ignored)
Linking Migration utility (mig)
rm -f /u01/app/oracle/visdb/9.2.0/rdbms/lib/mig
gcc -o /u01/app/oracle/visdb/9.2.0/rdbms/lib/mig -L/u01/app/oracle/visdb/9.2.0/rdbms/lib/ -L/u01/app/oracle/visdb/9.2.0/lib/ -L/u01/app/oracle/visdb/9.2.0/lib/stubs/ /u01/app/oracle/visdb/9.2.0/rdbms/lib/s0kumain.o /u01/app/oracle/visdb/9.2.0/rdbms/lib/skumcf.o /u01/app/oracle/visdb/9.2.0/rdbms/lib/defopt.o /u01/app/oracle/visdb/9.2.0/lib/nautab.o /u01/app/oracle/visdb/9.2.0/lib/naeet.o /u01/app/oracle/visdb/9.2.0/lib/naect.o /u01/app/oracle/visdb/9.2.0/lib/naedhs.o -ldbtools9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -l!
nzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxm!
l9 -lcore9 -lunls9 -lnls9 `cat /u01/app/oracle/visdb/9.2.0/lib!
/ldflags
` -lpls9 -lplp9 -lxsd9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /u01/app/oracle/visdb/9.2.0/lib/sysliblist` -Wl,-rpath,/u01/app/oracle/visdb/9.2.0/lib:/lib:/usr/lib -lm `cat /u01/app/oracle/visdb/9.2.0/lib/sysliblist` -ldl -lm
/usr/lib/gcc/i386-redhat-linux/3.4.6/libgcc_s.so: undefined reference to `dl_iterate_phdr@GLIBC_2.2.4'
collect2: ld returned 1 exit status
make: [u01/app/oracle/visdb/9.2.0/rdbms/lib/mig] Error 1 (ignored)
mv -f /u01/app/oracle/visdb/9.2.0/bin/mig /u01/app/oracle/visdb/9.2.0/bin/migO
mv: cannot stat `/u01/app/oracle/visdb/9.2.0/bin/mig': No such file or directory
make: [imig] Error 1 (ignored)
mv /u01/app/oracle/visdb/9.2.0/rdbms/lib/mig /u01/app/oracle/visdb/9.2.0/bin/mig
mv: cannot stat `/u01/app/oracle/visdb/9.2.0/rdbms/lib/mig': No such file or directory
make: [imig] Error 1 (ignored)
chmod 751 /u01/app/oracle/visdb/9.2.0/bin/mig
chmod: cannot access `/u01/app/oracle/visdb/9.2.0/bin/mig': No such file or directory
make: [imig] Error 1 (ignored)
- Linking DB*Verify utility (dbv)
rm -f /u01/app/oracle/visdb/9.2.0/rdbms/lib/dbv
gcc -o /u01/app/oracle/visdb/9.2.0/rdbms/lib/dbv -L/u01/app/oracle/visdb/9.2.0/rdbms/lib/ -L/u01/app/oracle/visdb/9.2.0/lib/ -L/u01/app/oracle/visdb/9.2.0/lib/stubs/ /u01/app/oracle/visdb/9.2.0/rdbms/lib/s0kudbv.o /u01/app/oracle/visdb/9.2.0/rdbms/lib/defopt.o -ldbtools9 -lsnls9 -lunls9 -lnls9 -lclntsh `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -l!
generic9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /u01/app/oracle/visdb/9.2.0/lib/sysliblist` -Wl,-rpath,/u01/app/oracle/visdb/9.2.0/lib:/lib:/usr/lib -lm `cat /u01/app/oracle/visdb/9.2.0/lib/sysliblist` -ldl -lm
/usr/lib/gcc/i386-redhat-linux/3.4.6/libgcc_s.so: undefined reference to `dl_iterate_phdr@GLIBC_2.2.4'
collect2: ld returned 1 exit status
make: [u01/app/oracle/visdb/9.2.0/rdbms/lib/dbv] Error 1 (ignored)
mv -f /u01/app/oracle/visdb/9.2.0/bin/dbv /u01/app/oracle/visdb/9.2.0/bin/dbvO
mv: cannot stat `/u01/app/oracle/visdb/9.2.0/bin/dbv': No such file or directory
make: [idbv] Error 1 (ignored)
mv /u01/app/oracle/visdb/9.2.0/rdbms/lib/dbv /u01/app/oracle/visdb/9.2.0/bin/dbv
mv: cannot stat `/u01/app/oracle/visdb/9.2.0/rdbms/lib/dbv': No such file or directory
make: [idbv] Error 1 (ignored)
chmod 751 /u01/app/oracle/visdb/9.2.0/bin/dbv
chmod: cannot access `/u01/app/oracle/visdb/9.2.0/bin/dbv': No such file or directory
make: [idbv] Error 1 (ignored)
Starting: "make -if /u01/app/oracle/visdb/9.2.0/precomp/lib/ins_precomp.mk links"
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; rm -f SQLCA.H)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; rm -f ORACA.H)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; rm -f SQLDA.H)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; rm -f SQLCA.COB)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; rm -f ORACA.COB)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; rm -f SQLCA.FOR)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; rm -f ORACA.FOR)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; rm -f BNDDSC.FOR)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; rm -f SELDSC.FOR)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; ln -s sqlca.h SQLCA.H)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; ln -s oraca.h ORACA.H)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; ln -s sqlda.h SQLDA.H)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; ln -s sqlca.cob SQLCA.COB)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; ln -s oraca.cob ORACA.COB)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; ln -s sqlca.for SQLCA.FOR)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; ln -s oraca.for ORACA.FOR)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; ln -s bnddsc.for BNDDSC.FOR)
(cd /u01/app/oracle/visdb/9.2.0/precomp/public ; ln -s seldsc.for SELDSC.FOR)
Completed...
Starting: "make -if /u01/app/oracle/visdb/9.2.0/sqlplus/lib/ins_sqlplus.mk install"
rm -f sqlplus
/bin/chmod 755 /u01/app/oracle/visdb/9.2.0/bin/demobld
/bin/chmod 755 /u01/app/oracle/visdb/9.2.0/bin/demodrop
/bin/chmod 755 /u01/app/oracle/visdb/9.2.0/bin/helpins
/bin/chmod 755 /u01/app/oracle/visdb/9.2.0/bin/pupbld
Linking sqlplus
rm -f sqlplus
gcc -o sqlplus -L/u01/app/oracle/visdb/9.2.0/sqlplus/lib/ -L/u01/app/oracle/visdb/9.2.0/lib/ -L/u01/app/oracle/visdb/9.2.0/lib/stubs/ /u01/app/oracle/visdb/9.2.0/sqlplus/lib/s0afimai.o -lsqlplus -lclntsh `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /u01/app/oracle/visdb/9.2.0/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /u01/app/oracle/vi!
sdb/9.2.0/lib/sysliblist` -Wl,-rpath,/u01/app/oracle/visdb/9.2.0/lib:/lib:/usr/lib -lm -lpthread `cat /u01/app/oracle/visdb/9.2.0/lib/sysliblist` -ldl -lm -lpthread
/usr/lib/gcc/i386-redhat-linux/3.4.6/libgcc_s.so: undefined reference to `dl_iterate_phdr@GLIBC_2.2.4'
collect2: ld returned 1 exit status
make: [sqlplus] Error 1 (ignored)
/bin/chmod 755 sqlplus
/bin/chmod: cannot access `sqlplus': No such file or directory
make: [sqlplus] Error 1 (ignored)
mv -f /u01/app/oracle/visdb/9.2.0/bin/sqlplus /u01/app/oracle/visdb/9.2.0/bin/sqlplusO
mv: cannot stat `/u01/app/oracle/visdb/9.2.0/bin/sqlplus': No such file or directory
make: [newsqlplus] Error 1 (ignored)
mv -f /u01/app/oracle/visdb/9.2.0/sqlplus/lib/sqlplus /u01/app/oracle/visdb/9.2.0/bin/sqlplus
mv: cannot stat `/u01/app/oracle/visdb/9.2.0/sqlplus/lib/sqlplus': No such file or directory
make: [newsqlplus] Error 1 (ignored)
/bin/chmod 751 /u01/app/oracle/visdb/9.2.0/bin/sqlplus
/bin/chmod: cannot access `/u01/app/oracle/visdb/9.2.0/bin/sqlplus': No such file or directory
make: [newsqlplus] Error 1 (ignored)
Completed...
Similar Messages
-
Error while running perl adpreclone.pl dbTier
Hi all,
Error while running perl adpreclone.pl dbTier
Running Rapid Clone with command...
perl /u02/app/orap/product/9.2.0/appsutil/bin/adclone.pl java=/u02/app/orap/product/9.2.0/jre/1.4.2 mode=stage stage=/u02/app/orap/product/9.2.0/appsutil/clone component=dbTier method=CUSTOM dbctx=/u02/app/orap/product/9.2.0/appsutil/DEV_XXX.xml showProgress
Beginning database tier Stage - Fri Jun 26 12:16:45 2009
APPS Password : appsdev
Log file located at /u02/app/orap/product/9.2.0/appsutil/log/DEV_jos11/StageDBTier_06261216.log
/ 75% completed
RC-50409: Topology information required for cloning not found in the database. Make sure that AutoConfig was run successfully prior to starting Rapid Clone, and try again
Raised by oracle.apps.ad.tools.AdCreateCtlFile
RC-40001: Fatal: Failed to create sql script adcrdbclone.sql for recreating control files at target
- 75% completed
ERROR while running Stage...
Checked metalink found the below solution but please the me interconnect_name is what ?
Check if the column interconnect_name from the fnd_database_instances has a value. If not, please update it with the correct value:
update FND_DATABASE_INSTANCES
set INTERCONNECT_NAME = 'xxx';
commit;
Rerun the process.
Thanks,
Bhanu Chander.Hi,
Alert log is normal.
but adcfgclone.pl log is
/u02/app/orap/product/9.2.0/appsutil/out/DEV_XXXX/dbfinfo.lst created Successfully.
Generating /u02/app/orap/product/9.2.0/appsutil/out/DEV_XXXX/addbhomsrc.xml which will contain the unique mount points
NODE_ID Column Availability: true
Node Id Column is available. dbfinfo.lst will contain the node list
Host Column Availability: true
Exception occurred while querying the datamodel: java.lang.NullPointerException
StackTrace:
java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:393)
at oracle.apps.ad.tools.AdCreateCtlFile.get_rac_data(AdCreateCtlFile.java:1325)
at oracle.apps.ad.tools.AdCreateCtlFile.gen_dbhomes_xml(AdCreateCtlFile.java:530)
at oracle.apps.ad.tools.AdCreateCtlFile.gen_crctrfclone_sql(AdCreateCtlFile.java:626)
at oracle.apps.ad.tools.AdCreateCtlFile.<init>(AdCreateCtlFile.java:428)
at oracle.apps.ad.clone.StageDatabase.doStage(StageDatabase.java:457)
at oracle.apps.ad.clone.StageDatabase.<init>(StageDatabase.java:266)
at oracle.apps.ad.clone.StageDBTier.<init>(StageDBTier.java:216)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:534)
RC-50409: Topology information required for cloning not found in the database. Make sure that AutoConfig was run successfully prior to starting Rapid Clone, and try again
Raised by oracle.apps.ad.tools.AdCreateCtlFile
RC-50208: Exception in method gen_crctrfclone_sql
RC-50208: Exception in Constructor AdCreateCtlFile
Raised by oracle.apps.ad.tools.AdCreateCtlFile
StackTrace:
java.lang.Exception
at oracle.apps.ad.tools.AdCreateCtlFile.get_rac_data(AdCreateCtlFile.java:1348)
at oracle.apps.ad.tools.AdCreateCtlFile.gen_dbhomes_xml(AdCreateCtlFile.java:530)
at oracle.apps.ad.tools.AdCreateCtlFile.gen_crctrfclone_sql(AdCreateCtlFile.java:626)
at oracle.apps.ad.tools.AdCreateCtlFile.<init>(AdCreateCtlFile.java:428)
at oracle.apps.ad.clone.StageDatabase.doStage(StageDatabase.java:457)
at oracle.apps.ad.clone.StageDatabase.<init>(StageDatabase.java:266)
at oracle.apps.ad.clone.StageDBTier.<init>(StageDBTier.java:216)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Thread.java:534)
RC-40001: Failed to create sql script adcrdbclone.sql for recreating control files at target
Raised by oracle.apps.ad.clone.StageDatabase
Thanks,
Bhanu Chander -
Getting error while running Perl adcfgclone.pl appsTier
hi ,
i m getting error while running Perl adcfgclone.pl appsTier
error:ksh: Perl: not found
i check for per and ksh
which perl
/usr/bin/perl
which ksh
/usr/bin/ksh
(my os out put for perl ,my os is SunOS testserver 5.10 Generic_137137-09 sun4u sparc SUNW,Ultra-250)
perl -V
/appl2/applmgr2/prodora/iAS/Apache/perl/lib/5.00503
/appl2/applmgr2/prodora/iAS/Apache/perl/lib/site_perl/5.005
/appl2/applmgr2/prodappl/au/11.5.0/perl
/usr/perl5/5.8.4/lib/sun4-solaris-64int
/usr/perl5/5.8.4/lib
/usr/perl5/site_perl/5.8.4/sun4-solaris-64int
/usr/perl5/site_perl/5.8.4
/usr/perl5/site_perl
/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
/usr/perl5/vendor_perl/5.8.4
/usr/perl5/vendor_perl
which i need to set in path
PATH=$PATH:/usr/local/bin:/usr/ccs/bin:/usr/sfw/bin (like this )
export PATH
please help me outhi ,
here is the out put
# pwd
/appl2/applmgr2/prodora/iAS/Apache/perl
# perl -V
Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
Platform:
osname=solaris, osvers=2.10, archname=sun4-solaris-64int
uname='sunos localhost 5.10 sun4u sparc SUNW,Ultra-2'
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xarch=v8 -D_TS_ERRNO',
optimize='-xO3 -xspace -xildoff',
cppflags=''
ccversion='Sun WorkShop', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='cc', ldflags =''
libpth=/lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -ldl -lm -lc
perllibs=-lsocket -lnsl -ldl -lm -lc
libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-R /usr/perl5/5.8.4/lib/sun4-solaris-64int/CORE'
cccdlflags='-KPIC', lddlflags='-G'
Characteristics of this binary (from libperl):
Compile-time options: USE_64_BIT_INT USE_LARGE_FILES
Locally applied patches:
22667 The optree builder was looping when constructing the ops ...
22715 Upgrade to FileCache 1.04
22733 Missing copyright in the README.
22746 fix a coredump caused by rv2gv not fully converting a PV ...
22755 Fix 29149 - another UTF8 cache bug hit by substr.
22774 [perl #28938] split could leave an array without ...
22775 [perl #29127] scalar delete of empty slice returned garbage
22776 [perl #28986] perl -e "open m" crashes Perl
22777 add test for change #22776 ("open m" crashes Perl)
22778 add test for change #22746 ([perl #29102] Crash on assign ...
22781 [perl #29340] Bizarre copy of ARRAY make sure a pad op's ...
22796 [perl #29346] Double warning for int(undef) and abs(undef) ...
22818 BOM-marked and (BOMless) UTF-16 scripts not working
22823 [perl #29581] glob() misses a lot of matches
22827 Smoke [5.9.2] 22818 FAIL(F) MSWin32 WinXP/.Net SP1 (x86/1 cpu)
22830 [perl #29637] Thread creation time is hypersensitive
22831 improve hashing algorithm for ptr tables in perl_clone: ...
22839 [perl #29790] Optimization busted: '@a = "b", sort @a' ...
22850 [PATCH] 'perl -v' fails if local_patches contains code snippets
22852 TEST needs to ignore SCM files
22886 Pod::Find should ignore SCM files and dirs
22888 Remove redundant %SIG assignments from FileCache
23006 [perl #30509] use encoding and "eq" cause memory leak
23074 Segfault using HTML::Entities
23106 Numeric comparison operators mustn't compare addresses of ...
23320 [perl #30066] Memory leak in nested shared data structures ...
23321 [perl #31459] Bug in read()
27722 perlio.c breaks on Solaris/gcc when > 256 FDs are available
SPRINTF0 - fixes for sprintf formatting issues - CVE-2005-3962
6663288 Upgrade to CGI.pm 3.33
REGEXP0 - fix for UTF-8 recoding in regexps - CVE-2007-5116
Built under solaris
Compiled at Jul 31 2008 12:07:52
@INC:
/usr/perl5/5.8.4/lib/sun4-solaris-64int
/usr/perl5/5.8.4/lib
/usr/perl5/site_perl/5.8.4/sun4-solaris-64int
/usr/perl5/site_perl/5.8.4
/usr/perl5/site_perl
/usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int
/usr/perl5/vendor_perl/5.8.4
/usr/perl5/vendor_perl
Thanks &Regard -
I am cloning r12 10.2.0.4 database and running perl adcfgclone.pl dbTier
bash-3.00$ perl adcfgclone.pl dbTier
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
Oracle Applications Rapid Clone
Version 12.0.0
adcfgclone Version 120.20.12000000.12
Enter the APPS password :
Running:
/u01/oracle/db/tech_st/10.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -cp /u01/oracle/db/tech_st/10.2.0/appsutil/clone/jlib/java:/u01/oracle/db/tech_st/10.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/oracle/db/tech_st/10.2.0/appsutil/clone/jlib/ojdbc14.jar oracle.apps.ad.context.CloneContext -e /u01/oracle/db/tech_st/10.2.0/appsutil/clone/bin/../context/db/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_631.lst -stage /u01/oracle/db/tech_st/10.2.0/appsutil/clone 2> /tmp/adcfgclone_631.err; echo $? > /tmp/adcfgclone_631.res
Log file located at /u01/oracle/db/tech_st/10.2.0/appsutil/clone/bin/CloneContext_0407143111.log
Provide the values required for creation of the new Database Context file.
Target System Hostname (virtual or normal) [ksctest] : ksctest
Target Instance is RAC (y/n) [n] : n
Target System Database SID : atest
Target System Base Directory : /u01/oracle
Oracle OS User [oracle] : oracle
Target System utl_file_dir Directory List : /usr/tmp
Number of DATA_TOP's on the Target System [2] : 1
Target System DATA_TOP Directory 1 : /u01/oracle/db/apps_st/data
Target System RDBMS ORACLE_HOME Directory [u01/oracle/db/tech_st/10.2.0] : /u01/oracle/db/tech_st/10.2.0
Do you want to preserve the Display [null] (y/n) ? : n
Target System Display [ksctest:0.0] : ksctest:1.0
Do you want the the target system to have the same port values as the source system (y/n) [y] ? : n
Target System Port Pool [0-99] : 50
Checking the port pool 50
done: Port Pool 50 is free
Report file located at /u01/oracle/db/tech_st/10.2.0/appsutil/temp/portpool.lst
Complete port information available at /u01/oracle/db/tech_st/10.2.0/appsutil/temp/portpool.lst
Backing up /u01/oracle/db/tech_st/10.2.0/appsutil/atest_ksctest.xml to /u01/oracle/db/tech_st/10.2.0/appsutil/atest_ksctest.xml1.bak
Creating the new Database Context file from :
/u01/oracle/db/tech_st/10.2.0/appsutil/template/adxdbctx.tmp
The new database context file has been created :
/u01/oracle/db/tech_st/10.2.0/appsutil/atest_ksctest.xml
Log file located at /u01/oracle/db/tech_st/10.2.0/appsutil/clone/bin/CloneContext_0407143111.log
Check Clone Context logfile /u01/oracle/db/tech_st/10.2.0/appsutil/clone/bin/CloneContext_0407143111.log for details.
Running Rapid Clone with command:
perl /u01/oracle/db/tech_st/10.2.0/appsutil/clone/bin/adclone.pl java=/u01/oracle/db/tech_st/10.2.0/appsutil/clone/bin/../jre mode=apply stage=/u01/oracle/db/tech_st/10.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/u01/oracle/db/tech_st/10.2.0/appsutil/atest_ksctest.xml showProgress contextValidated=true
Running:
perl /u01/oracle/db/tech_st/10.2.0/appsutil/clone/bin/adclone.pl java=/u01/oracle/db/tech_st/10.2.0/appsutil/clone/bin/../jre mode=apply stage=/u01/oracle/db/tech_st/10.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/u01/oracle/db/tech_st/10.2.0/appsutil/atest_ksctest.xml showProgress contextValidated=true
APPS Password :
Beginning database tier Apply - Sun Apr 7 14:35:15 2013
/u01/oracle/db/tech_st/10.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/u01/oracle/db/tech_st/10.2.0/oui -classpath /u01/oracle/db/tech_st/10.2.0/appsutil/clone/jlib/xmlparserv2.jar:/u01/oracle/db/tech_st/10.2.0/appsutil/clone/jlib/ojdbc14.jar:/u01/oracle/db/tech_st/10.2.0/appsutil/clone/jlib/java:/u01/oracle/db/tech_st/10.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:/u01/oracle/db/tech_st/10.2.0/appsutil/clone/jlib/oui/ewt3.jar:/u01/oracle/db/tech_st/10.2.0/appsutil/clone/jlib/oui/share.jar:/u01/oracle/db/tech_st/10.2.0/appsutil/clone/jlib/oui/srvm.jar:/u01/oracle/db/tech_st/10.2.0/appsutil/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyDBTier -e /u01/oracle/db/tech_st/10.2.0/appsutil/atest_ksctest.xml -stage /u01/oracle/db/tech_st/10.2.0/appsutil/clone -rmanstage -rmantgtloc -srcdbname -showProgress
APPS Password : Log file located at /u01/oracle/db/tech_st/10.2.0/appsutil/log/atest_ksctest/ApplyDBTier_04071435.log
/ 4% completed RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
ERROR while running Apply...
Sun Apr 7 14:36:15 2013
ERROR: Failed to execute /u01/oracle/db/tech_st/10.2.0/appsutil/clone/bin/adclone.pl
Please check logfile.
=========================================================
Skipping Profile Phase
Skipping Apply Phase
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[INSTANTIATE PHASE]
AutoConfig could not successfully instantiate the following files:
Directory: /u01/oracle/db/tech_st/10.2.0/appsutil/install/atest_ksctest
adcrdb.sh INSTE8
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
i am getting this error in logfileuser3714906 wrote:
please updatePlease see my previous reply -- Please search the log file for adcrdb.sh and you should find more details about the error
Thanks,
Hussein -
Cloning failed in Oracle EBS 11i
Hi All,
I have faced one issue while doing cloning ..
while running adcfgclone.pl on appsTier the scripts struck or hangs at ADX Database Utility.
and i cancelled after sometime than ran once again but no use and getting failed when Generate Tns Names...
log shows like below.....
Generate Tns Names
Logfile: /oracle/apps/TEST/testappl/admin/TEST_oraapps02/log/06201413/NetServiceHandler.log
Classpath : /oracle/apps/TEST/testcomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/oracle/apps/TEST/testcomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/oracle/apps/TEST/testcomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/oracle/apps/TEST/testcomn/java/appsborg2.zip:/oracle/apps/TEST/testcomn/java
Updating s_tnsmode to 'generateTNS'
UpdateContext exited with status: 0
Result : FAILED
===========================================================================
Ending Context Value Management System.
===========================================================================
===========================================================================
Uploading file system Context file and its templates to the database
Context file :
/oracle/apps/TEST/testappl/admin/TEST_oraapps02.xml
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL=''
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : oraapps02
sDbDomain : emri.net
sDbPort : 1528
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@oraapps02.emri.net:1528:TEST
Connection obtained
-------------------ADX Database Utility Finished---------------
=============================================================
please resolve this issue...
Thanks in Advance.....Hi Hussein,
Thanks for reply and i followed solution as per the above but queries fails with below errors..
SQL> conn applsys/apps
Connected.
SQL> ALTER INDEX fnd_lobs_ctx REBUILD;
ALTER INDEX fnd_lobs_ctx REBUILD
ERROR at line 1:
ORA-29868: cannot issue DDL on a domain index marked as LOADING
[appltest@oraapps02 TEST_oraapps02]$ sqlplus 'apps/apps'
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Jun 25 10:04:24 2012
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
SQL>
SQL> @adupdlobs.sql apps apps TEST
Connected.
declare
ERROR at line 1:
ORA-29861: domain index is marked LOADING/FAILED/UNUSABLE
ORA-06512: at line 39
ORA-06512: at line 94
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
please tell me how to resolve this?
and i have tried with fresh rapid clone but same issue is running autoconfig fails or hangs at the script called adupdlobs.p...
after sometime i have tried to run autoconfig on both tiers after bounce the DATABASE first on dbTier unfortunately autocnfig successfully completed on the both nodes..
after i have started all services and but not getting login page and i tried to bounce the services after hitting adstpall.sh it was hangs and not go down.
even after sometime i kill all process manually bounce the database and start the services
but unable to get login page....
please give me reply with solution...
Thanks for your support .............
Edited by: 865955 on Jun 25, 2012 4:53 PM -
Ebs 11i Cloning in Win 2003 dbtier fails with ERROR: Could not open
Hi,
The rapidclone - DBTier cloning (11i) on Windows 2003 server fails with the following weird error message.
There is no detailed log file created.
echo %PATH%
f:\oracle\prodora\8.0.6\bin;f:\oracle\proddb\9.2.0\apache\perl\perl\5.0053\bin\mswin32-x86;D:\mksnt\mksnt;;
F:\oracle\proddb\9.2.0\appsutil\clone\bin\> perl adcfgclone.pl dbTier
Enter the APPS password [APPS] :
apps
First Creating a new context file for the cloned system.
This program is going to ask you information about the new system:
ERROR: Could not open
Any inputs on this really appreciated.
Thanks,
Prasannawhich perl picks up from the path f:\oracle\proddb\9.2.0\apache\perl\5.00503\bin\mswin32-x86/perl.exe.
Please check the below messages.
I had verified adchkutl.sh script too (not sure whether this will be invoked in windows env) ?
F:\oracle\prodappl\ad\11.5.0\bin>which perl
f:\oracle\proddb\9.2.0\apache\perl\5.00503\bin\mswin32-x86/perl.exe
F:\oracle\prodappl\ad\11.5.0\bin>adchkutl.sh
Checking for make... found - D:\mksnt\mksnt/make.exe
Checking for ld...
Unable to locate 'ld' utility in path
Checking for cc...
Unable to locate 'cc' utility in path
Checking for ar...
Unable to locate 'ar' utility in path
Unable to locate all utilities with system path.
PATH = f:\oracle\proddb\9.2.0pache\perl?.0050in\mswin32-x86;D:\mksnt\mksnt;;
F:\oracle\prodappl\ad\11.5.0\bin>which ld
D:\mksnt\mksnt/ld.exe
F:\oracle\prodappl\ad\11.5.0\bin>which cc
D:\mksnt\mksnt/cc.exe
F:\oracle\prodappl\ad\11.5.0\bin>which ar
D:\mksnt\mksnt/ar.exe
F:\oracle\prodappl\ad\11.5.0\bin>
Thanks -
Oracle EBS 11i Installation issues
Dear All,
I am trying to install Oracle EBS 11i on Redhat Enterprise Linux 4.5
[oracle@machine1 /]$ cd /Stage11i/startCD/Disk1/rapidwiz/
[oracle@machine1 rapidwiz]$ ./rapidwiz
Note: i have started the installation logged as user oracle which is member of groups oinstall and dba
the installatio starts without warning but suddenly installation aborted by giving the message check the log
/u01/oracle/proddb/9.2.0/appsutil/log/PROD-macnine1/021804050.log to see the errors
when i checked the specified log file ,some errors found here described below
runProcess_6
Statusstring Executing Command: adlnkoh.sh
adlnkoh.sh started at Mon Feb 18 18:32:18 UZT 2008
logfile located in /u01/oracle/proddb/9.2.0/install/make.log
Error while running adlnkoh.sh. Please check logfile
Errors while running adlnkoh.sh
There was an error while running the command -
/u01/oracle/proddb/9.2.0/temp/PROD_machine1/adrun9i.sh APPS APPS
/u01/oracle/proddb/9.2.0/appsutil/install/adlnkoh.sh: line 198:
/u01/oracle/proddb/9.2.0/bin/sqlplus: No such file or directory
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file
for details.
and when i check the log file /u01/oracle/proddb/9.2.0/install/make.log
many errors found like these
chmod 6751 /u01/oracle/proddb/9.2.0/bin/oracle
chmod: cannot access `/u01/oracle/proddb/9.2.0/bin/oracle': No such file or
directory
make: [ioracle] Error 1 (ignored)
mv /u01/oracle/proddb/9.2.0/rdbms/lib/oracle
/u01/oracle/proddb/9.2.0/bin/oraclemv: cannot stat
`/u01/oracle/proddb/9.2.0/rdbms/lib/oracle': No such file or directory
make: [ioracle] Error 1 (ignored)
chmod 6751 /u01/oracle/proddb/9.2.0/bin/oracle
chmod: cannot access `/u01/oracle/proddb/9.2.0/bin/oracle': No such file or
directory
make: [ioracle] Error 1 (ignored)
Completed...
/u01/oracle/proddb/9.2.0/bin/oracle did not relink properly.
Please review relink errors in this log file
The user Oracle (by which installation is in progress) has all privileges on base directory /u01 (used for 11i install)
Here is the permissions for both directoried Stage11i and /u01
Code: Select all
drwxr-xr-x 7 root root 4096 Feb 15 13:03 Stage11i
drwxr-xr-x 3 oracle oinstall 4096 Feb 18 17:05 u01Now i had started the installation again and once again unable to do this
i had seen the errors while checking the logfile created during installation
Statusstring Creating the database controlfile...
adcrdb.sh started at Fri Feb 22 21:37:23 UZT 2008
The environment settings are as follows ...
ORACLE_HOME : /u01/oracle/testdb/9.2.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /u01/oracle/testdb/9.2.0/Apache/perl/bin:/u01/oracle/testdb/9.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/testdb/9.2.0/jre/1.4.2/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/usr/bin:/Stage11i/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/local/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
LD_LIBRARY_PATH : /u01/oracle/testdb/9.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/testdb/9.2.0/ctx/lib
Executable : /u01/oracle/testdb/9.2.0/bin/sqlplus
The log information will be written to
/u01/oracle/testdb/9.2.0/appsutil/log/TEST_machine1/adcrdb_TEST.txt
Creating the control file for TEST_machine1 database ...
SQL*Plus: Release 9.2.0.6.0 - Production on Fri Feb 22 21:37:33 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size 452204 bytes
Variable Size 402653184 bytes
Database Buffers 167772160 bytes
Redo Buffers 10629120 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
blocks
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u01/oracle/testdata/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.localdomain"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size 452204 bytes
Variable Size 402653184 bytes
Database Buffers 167772160 bytes
Redo Buffers 10629120 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified controlfile
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 3284
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 581506668 bytes
Fixed Size 452204 bytes
Variable Size 402653184 bytes
Database Buffers 167772160 bytes
Redo Buffers 10629120 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000 blocks
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP add tempfile '/u01/oracle/testdata/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.localdomain"
ERROR at line 1:
ORA-01109: database not open
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
exit_code=1
Checking for errors ...
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
ORA-01507: database not mounted
ORA-01109: database not open
ORA-01109: database not open
ORA-01507: database not mounted
ORA-00205: error in identifying controlfile, check alert log for more info
ORA-00210: cannot open the specified controlfile
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 3284
ORA-06512: at line 1
ORA-01503: CREATE CONTROLFILE failed
ORA-01200: actual file size of 120647 is smaller than correct size of 192000
ORA-01110: data file 394: '/u01/oracle/testdata/a_ref01.dbf'
ORA-01507: database not mounted
ORA-01109: database not open
ORA-01109: database not open
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 9.2.0.6.0 - Production on Fri Feb 22 21:39:16 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
Cannot create control file for TEST
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for TEST instance -
Application express installation is failed while running apxdevrm.sql scrip
Hello Experts,
i am new to Oracle Application express. My installation is failed while running the script (apxdevrm.sql).
here is the command i ran as sysdba
@apexins xxxxx apex apex temp /i/
installation is exited with the following error :
REPORT:SYS> prompt Set Application ID...
Set Application ID...
REPORT:SYS>
REPORT:SYS> begin
2
3 -- SET APPLICATION ID
4 wwv_flow.g_flow_id := nvl(wwv_flow_application_install.get_application_id,4411);
5 wwv_flow_api.g_id_offset := nvl(wwv_flow_application_install.get_offset,0);
6 null;
7
8 end;
9 /
REPORT:SYS>
REPORT:SYS> --application/delete_application
REPORT:SYS>
REPORT:SYS> begin
2
3 -- Remove Application
4 wwv_flow_api.remove_flow(nvl(wwv_flow_application_install.get_application_id,4411));
5
6 end;
7 /
begin
ERROR at line 1:
ORA-20001: API operation includes calls that are incompatible with the current runtime.
ORA-06512: at "APEX_030200.WWV_FLOW_API", line 32
ORA-06512: at "APEX_030200.WWV_FLOW_API", line 247
ORA-06512: at line 4
here is my database version :
REPORT:SYS> select * from v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
OS version :
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.6 (Tikanga)
any one had this issue in the past?
your help is greatly appreciated.
Edited by: 892564 on Oct 20, 2011 4:15 PMHello experts,
is there any best way to trouble shoot the error which i got?
Thanks
!# Pavan -
HTTP Server Patch - 4393827 for Oracle EBS 11i
Hi,
Our env is Oracle EBS 11i (11.5.10) + CU2 +ATG RUP6. We are currently on 9.2.0.8.0
I am currently applying Minimum Baseline Patches for extended support - +Patch Requirements for Extended Support of Oracle E-Business Suite Release 11.5.10 [ID 883202.1]+.
For the HTTP Server Patch - 4393827 do I need to apply patches for all the below components? It prompted me 4 times to apply the patch for each component.
OHS_1.0.2.2 component
MODPLSQL component
Webcache_1.0.2.2
DB_8.1.7.4
Rgds,
ThiruThanks.
I applied HTTP Server Patch - 4393827 in my upgraded instance 11.5.10 CU2ATG RUP6.
Now the Apache version is:
Server version: Oracle HTTP Server Powered by Apache/1.3.19 (Win32)
Server built: Jun 14 2005 15:26:57 (iAS 1.0.2.2.2 rollup 5)
While applying HTTP Server Patch - 4393827, I was prompted to enter Y or N to apply patch for the following components individually. I had the option to enter N also.
OHS_1.0.2.2 component
MODPLSQL component
Webcache_1.0.2.2 component
DB_8.1.7.4 component
I entered Y(Yes) for all the components and the patching was successful for all the components.
I am doubtful about the DB_8.1.7.4 component patch. Should I say Y to this also?. Since my Instance is on 9.2.0.8.0 is it required to apply this component (DB_8.1.7.4 component) also?
Rgds,
Thiru -
DDLIMP utility is failing while running the DDL_OLTP.ctl script for Siebel
DDLIMP utility is failing while running the DDL_OLTP.ctl script for Siebel source on DB2.
Below is the the log details:
2021 2012-11-08 03:23:46 2012-11-08 03:25:56 -0700 0000002a 001 003f 0001 09 ddlimp 604 736 C:\OBIA\Upgrade\CTLFiles\DDL_.log
ContextInit ContextInit 0 0 2012-11-08 03:23:46 Message Facility failed to init. Siebel Root: C:\DAC\client\utilities
Trace Trace 3 0 2012-11-08 03:23:46 Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Trace Trace 3 0 2012-11-08 03:23:46 Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
Trace Trace 3 0 2012-11-08 03:23:46
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:46 ddlimp /U SIEBEL /P ***** /C siebel /G SSE_ROLE /F C:\OBIA\Upgrade\CTLFiles\DDL_OLTP.CTL /L C:\OBIA\Upgrade\CTLFiles\DDL_
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:46
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:46 Connecting to the database...
DBCLog DBCLogError 1 0 2012-11-08 03:23:52 SQL Warning, SQL State 01004, 0, [DataDirect][ODBC DB2 Wire Protocol driver]String data, right truncated.
DBCLog DBCLogError 1 0 2012-11-08 03:23:52 SQL Warning, SQL State , 40042692, CLog DBCLogError 1 0 2012-11-08 03:23:52 SQL Warning, SQL State 01004, 0, [DataDirect][ODBC DB2 Wire Protocol driver]String data, right truncated.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52 Connected.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52 Reading tables and indexes from DDL file...
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52 Read 522 tables and 1084 indexes from DDL file...
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:23:52 Reading existing schema...
SARMLog SARMInformation 3 0 2012-11-08 03:23:52 SARM is OFF -change param SARMLevel to enable
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Read 0 tablespaces, 6137 tables and 24846 indexes from existing schema...
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Running SQL statements against the database...
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Merging table S_ETL_COSTLST ...
SQLError Statement 0 0 2012-11-08 03:25:56 SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID varchar(15)
DBCLog DBCLogError 1 0 2012-11-08 03:25:56 [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
SQLError Statement 0 0 2012-11-08 03:25:56 SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID varchar(15)
DBCLog DBCLogError 1 0 2012-11-08 03:25:56 [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
SQLError Statement 0 0 2012-11-08 03:25:56 SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID default '0'
DBCLog DBCLogError 1 0 2012-11-08 03:25:56 [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 37000: [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]ILLEGAL SYMBOL modify; VALID SYMBOLS ARE table S_ETL_COSTLST. ADD
SQLError Statement 0 0 2012-11-08 03:25:56 SQL Statement:
alter table S_ETL_COSTLST modify
CONFLICT_ID default '0'
DBCLog DBCLogError 1 0 2012-11-08 03:25:56 [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 56098: [DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]An error occurred during implicit system action type '2'. Information returned for the error includes SQLCODE '-104', SQLSTATE '42601' and message tokens 'modify|table S_ETL_COSTLST|ADD'.
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 alter table S_ETL_COSTLST modify
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 CONFLICT_ID default '0'
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 ;
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 writeExecDDL error (UTLOdbcExecDirectDDL pDDLSql).
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 writeExecDDL error (UTLDbDdlColModify).
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Error in MainFunction (UTLDbDdlDbMerge).
SQLDBUtilityLog SQLDBUtilityLog 3 0 2012-11-08 03:25:56 Error in Main function...
GenericLog GenericError 1 0 2012-11-08 03:25:56 (logapi.cpp (167) err=1 sys=126) SBL-GEN-00001: (logapi.cpp: 167) error code = 1, system error = 126, msg1 = (null), msg2 = (null), msg3 = (null), msg4 = (null)If you run DAC on a 64-bit windows Operating System, you must create the ODBC data source using the ODBC Administrator tool in %windir%\SysWOW64\odbcad32.exe. for creating the data warehouse tables.
If helps pls mark -
How to analyze data integrity in Oracle EBS 11i
Hi guru,
I need to do some analysis for the data integrity for the oracle ebs 11i,
Do anyone have any scripting for that.
tqHi,
I think there are are no such scripts for the whole application. However, you can find data integrity scripts for some modules in these documents.
Note: 179661.1 - E-Business Suite Diagnostics 11i Test Catalog
Note: 364121.1 - 11i : Oracle Payables Data Integrity Analysis Activity Test
Note: 305913.1 - What information we need to work Receivables Data Integrity Service Requests for Release 11i
Regards,
Hussein -
How to check ,how many users are logged in and logged out in oracle ebs 11i/R12.
Hi Experts,
Kindly let me know
how to check ,how many users are logged in and logged out in oracle ebs 11i/R12.
Also, in the database level too ,Do we need to write any trigger for this?
Thanks in advance.Hi,
How to check ,how many users are logged in and logged out in oracle ebs 11i/R12.
Please check the following links:
Oracle EBS - Number of Users logged into EBS / Oracle Applications currently
List all users currently logged in on Oracle EBS
Also see forum Search:
Forum Search: Logged In EBS User
Also, in the database level too
Please see:
https://forums.oracle.com/message/9225094#9225094
Do we need to write any trigger for this?
Yes you may, But I personally suggest you not to do so as it may affect performance.
Thanks &
Best Regards, -
Daily, weekly and monthly acitivities in Oracle EBS 11i
Hi All,
I need to know the daily, weekly and monthly maintainance activities for Oracle EBS 11i .
tquser_exit wrote:
Hi All,
I need to know the daily, weekly and monthly maintainance activities for Oracle EBS 11i .
tqthis is not forum for EBS, so please post in
General EBS Discussion
Thanks -
Installing Oracle EBS 11i installation problem
Dear All,
I have a problem regarding the installation of Oracle EBS 11i of which I can't figure out a solution.
After unzipping all the 108 files during the rapidwiz installation the installer seems to halt (in step 1, 100% of file extraction). It involves instconf.drv but it doesn't show me an error in the installation logs. The line that appears is the following:
instantiatefile -d instconf.drv
I tried to change my Linux distribution from SLES10 to Ubuntu but that doesn't work either.
Could you please help me out with this.
Kind regards,
Charif EnnaciriDear hsawwan,
I checked the log file and it's full of lines similar like:
AC-50402: Exception: java.lang.NullPointerException
Raised by oracle.apps.ad.autoconfig.InstantiateFile
instantiate file:
source : /d01/oracle/visdb/9.2.0/appsutil/template/oui/bin/addNode.sh
dest : /d01/oracle/visdb/9.2.0/oui/bin/addNode.sh
backup : /d01/oracle/visdb/9.2.0/oui/bin/addNode.sh to /d01/oracle/visdb/9.2.0/appsutil/out/VIS_server/04261350/addNode.sh
StackTrace:
java.lang.NullPointerException
at oracle.apps.ad.autoconfig.InstantiateFile.instantiateTheFile(InstantiateFile.java:4019)
at oracle.apps.ad.autoconfig.InstantiateFile.processDriverFile(InstantiateFile.java:2655)
at oracle.apps.ad.autoconfig.InstantiateFile.<init>(InstantiateFile.java:1066)
at oracle.apps.ad.autoconfig.InstantiateFile.<init>(InstantiateFile.java:951)
at oracle.apps.ad.autoconfig.InstantiateFile.<init>(InstantiateFile.java:609)
at oracle.apps.ad.autoconfig.InstantiateFile.doMain(InstantiateFile.java:1948)
at oracle.apps.ad.autoconfig.InstantiateFile.main(InstantiateFile.java:2312)
AC-50402: Exception: java.lang.NullPointerException
Raised by oracle.apps.ad.autoconfig.InstantiateFile
instantiate file:
source : /d01/oracle/visdb/9.2.0/appsutil/template/oui/bin/ouica.sh
dest : /d01/oracle/visdb/9.2.0/oui/bin/ouica.sh
backup : /d01/oracle/visdb/9.2.0/oui/bin/ouica.sh to /d01/oracle/visdb/9.2.0/appsutil/out/VIS_server/04261350/ouica.sh
StackTrace:
java.lang.NullPointerException
at oracle.apps.ad.autoconfig.InstantiateFile.instantiateTheFile(InstantiateFile.java:4019)
at oracle.apps.ad.autoconfig.InstantiateFile.processDriverFile(InstantiateFile.java:2655)
at oracle.apps.ad.autoconfig.InstantiateFile.<init>(InstantiateFile.java:1066)
at oracle.apps.ad.autoconfig.InstantiateFile.<init>(InstantiateFile.java:951)
at oracle.apps.ad.autoconfig.InstantiateFile.<init>(InstantiateFile.java:609)
at oracle.apps.ad.autoconfig.InstantiateFile.doMain(InstantiateFile.java:1948)
at oracle.apps.ad.autoconfig.InstantiateFile.main(InstantiateFile.java:2312)
What can I do about this?
Kind regards,
Charif -
Oracle Discoverer in Oracle EBS 11i
Hi,
Just wanted to ask if Oracle Discoverer is a part of Oracle EBS 11i or do we need to purchase a separate license?
Thanks,
AllenHi Allen;
Just wanted to ask if Oracle Discoverer is a part of Oracle EBS 11i or do we need to purchase a separate license?No;
Please see:
Re: Discoverer on R12
If you have any dupt log a sr or connect with local oracle sales representive
Regard
Helios
Maybe you are looking for
-
TIme Machine backup grows too large during backup process
I have been using Time Machine without a problem for several months, backing up my imac - 500GB drive with 350g used. Recently TM failed because the backups had finally filled the external drive - 500GB USB. Since I did not need the older backups, I
-
My wife (who has a Droid) asked me to text a photo to her. I went to Message on my 4s, selected my wife as the target for the text, selected the photo, and sent the text. Rather than appearing on her mobile phone, the text went to her email. When
-
How to reinstall os x when experiencing kernel panics
Okay I am not a very good MAC user, i just use it to test browsers for development. I rarely ever use it and dont install any software in it but one day it decided to give the kernel panics where it talks about "You need to restart your computer" bla
-
I have a frustrating problem ! My external iSight camera has stopped working, ever since I moved from a PPC G5 to an Intel Mac Mini. I did actually have it working for a while, but I must have changed something and now nothing I do will get it to wor
-
Can I create a Table of Contents (CS6) in a separate document of book file?
I'm helping someone create an ebook. He has three separate sections of his book so there are three files that make up the Indesign book. I currently have a table of contents at the beginning of each of the three sections and when I pdf the book, it w