Oracle error message 1445 when executing a SAP query

Hello experts,
We are running a ECC6.0 DEV and ACC system on an Oracle database (release 10.2.0.2.0).
When I execute a query in SQ01 on our acceptance system, a database error occurs (ORA-1445). However, when I execute the same query on our DEV system, this error does not occur.
I managed to find that this error might be due to a bug in Oracle and that this bug occurs when executing a query with many joins (more than 6), which indeed I am doing. What I do not understand is that this query does run on DEV without errors but not on ACC.
Does anyone have a suggestion?
Thanks and regards,
Alfio Esposito

Check if note "1126517 - ORA-1445 or incorrect values with 10.2" applies and also check if you have the same patches on DEV + PRD installed (using opatch lsinventory)
Markus

Similar Messages

  • LE-TRM: Error message LTRM023 when executing LROUT

    Dear all,
    When executing the transaction LROUT, I get the error message LTRM023 "Site is not defined". I checked table LROUT and it is actually empty.
    However, I created appropriate settings in maintenance views V_T340DT, V_T347A, V_LLOCT and all other SPRO entries related to my TRM site. Futhermore, I implemented all OSS notes related to LROUT or TRM route.
    Then, I activated debug mode.
    > Issue 1:
    Main program SAPLLTRM
    Source code LLTRMU09
    Function LTRM_LLOCT_READ
    IF    ss_lloct IS INITIAL                        
       OR ss_lloct-locat <> i_locat.                 
      SELECT SINGLE * FROM lloct INTO ss_lloct       
        WHERE locat = i_locat.                       
    The issue is that settings of table LLOCT are not red. I had to manually set i_locat = "site" to process further.
    > Issue 2:
    Main program SAPLLTRS_SERVICES
    Source code LLTRS_SERVICESU08
    Function LTRS_LRSTY_READ
    SELECT * FROM lrsty INTO TABLE it_lrsty
           WHERE locat = i_locat.          
    IF sy-subrc <> 0.                      
      RAISE table_lrsty_not_maintained.    
    ENDIF.                                 
    But sy-subrc = 4..., so system raise error message table_lrsty_not_maintained. However, table LRSTY is maintened.
    Did you already have this issue? How did you solve it?
    In advance, thx a lot for your help.
    PS: I play with ECC 5.0, Release 500, SP SAPKGPAC05. With nearly equivalent settings in ECC 6.0, Release 604, SP SAPK-60402INEADFPS, I don't have any trouble running LROUT...

    Hi,
    Have you found the answer at your problem.
    I know you posted it one year ago but I am in the same case.
    So, if you have found the solution, I would be very pleased if you could help me.
    Edited by: FlorianFFF on Aug 26, 2011 3:03 PM

  • Oracle error -6508 returned when executing JSP

    The JSP program executes a stored procedure from a package. I've recompiled the package after some changes. The JSP returns -6508 error when it is executing the procedure. The error is returned only after recompiling the stored package. What could be the problem?

    Hi,
    ORA-6508 error is returned when the stored procedure cannot be found.
    ORA-06508 PL/SQL: could not find program unit being called
    Cause: An attempt was made to call a stored program that could not be found. The program may have been dropped or incompatibly modified, or have compiled with errors.
    Action: Check that all referenced programs, including their package bodies, exist and are compatible.
    Please check the package signature and the specifications.
    Thanks,
    Rashmi.

  • SQL error 3113 occurred when executing EXEC SQL.

    Hi,
    We are facing one typical problem, One background is failing regularly with
    below dump. as we now got all notes giving information, if database  restarted
    taking backup, these type of failures occur, but our database is only down for backup once in a week, but it is failing with frequenly.
    in this two servers are located in different place, in this job tries to connect
    another server to get material statistics.
    It is giving some error message in sm21 with
    SQL error 3113 occurred when executing EXEC SQL.
    work procees in reconnect mode.
    all notes saying these types of dump occur when database restared, but this dump
    even though database is up.
    below is short dump, please can anyone help me from this problem.
    ABAP runtime errors    DBIF_DSQL2_SQL_ERROR
          Occurred on    08.01.2007 at 00:30:28
    >> Short dump has not been completely stored. It is too big.
    SQL error 3113 occurred when executing EXEC SQL.
    What happened?
    The error occurred in the current database connection "AZ1".
    What can you do?
    Note the actions and input that caused the error.
    Inform your SAP system administrator.
    You can print out this message by choosing "Print". Transaction ST22
    allows you to display and manage termination messages, including keeping
    them beyond their normal deletion date.
    Error analysis
    How to correct the error
    Database error text........: "ORA-03113: end-of-file on communication channel#"
    Triggering SQL statement...: "select mara.groes, mara.brgew, mara.ntgew,
    mara.gewei, mara.volum, mara.voleh, mara.mstae, mara.mstde, mara.prdha,
    marc.matnr, marc.werks, marc.mmsta, marc.mmstd from sapr3.mara, sapr3.m
    where sapr3.mara.mandt = sapr3.marc.mandt and sapr3.mara.matnr =
    Internal call code.........: "[DBDS/NEW DSQL]"
    Please check the entries in the system log (Transaction SM21).
    If the error occurred in a non-modified SAP program, you may be
    able to find a solution in the SAP note system.
    If you have access to the note system yourself, use the following
    search criteria:
    "DBIF_DSQL2_SQL_ERROR"
    "ZM2431216 " or "ZM2431216 "
    "EXTRACT_GENERAL_DATA"
    If you cannot solve the problem yourself, please send the
    following documents to SAP:
    1. A hard copy print describing the problem.
      To obtain this, select the "Print" function on the current screen.
    2. A suitable hardcopy prinout of the system log.
      To obtain this, call the system log with Transaction SM21
      and select the "Print" function to print out the relevant
      part.
    3. If the programs are your own programs or modified SAP programs,
      supply the source code.
      To do this, you can either use the "PRINT" command in th
      print the programs using the report RSINCL00.
    4. Details regarding the conditions under which the error o
      or which actions and input led to the error.
    System environment
    SAP Release.............. "46C"
    Application server....... "essceu3"
    Network address.......... "172.19.119.198"
    Operating system......... "AIX"
    Release.................. "5.3"
    Hardware type............ "00C7ADBD4C00"
    Database server.......... "ukblx176"
    Database type............ "ORACLE"
    Database name............ "EU3"
    Database owner........... "SAPR3"
    Character set............ "es_ES.ISO8859-1"
    SAP kernel............... "46D"
    Created on............... "Jul 9 2006 20:26:33"
    Created in............... "AIX 1 5 00447C4A4C00"
    Database version......... "OCI_920__OCI_7_API "
    Patch level.............. "2257"
    Patch text............... " "
    Supported environment....
    Database................. "ORACLE 8.0.5.., ORACLE 8.0.6.., ORACLE
    8.1.6.., ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE 10.2.0.."
    SAP database version..... "46D"
    Operating system......... "AIX 1 4, AIX 2 4, AIX 3 4, AIX 1 5, AIX 2 5, AIX 3
    5, , System build information:,                                      , LCHN :
    841480"
    User, transaction...
    Client.............. 600
    User................ "MPZMMES"
    Language key........ "S"
    Transaction......... " "
    Program............. "ZM2431216 "
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
    Information on where termination occurred
    The termination occurred in the ABAP/4 program "ZM2431216 " in
    "EXTRACT_GENERAL_DATA".
    The main program was "ZM2431216 ".
    The termination occurred in line 980
    of the source code of program "ZM2431216 " (when callin
    The program "ZM2431216 " was started as a background jo
    Source code extract
    009500              mara.ntgew,
    009510              mara.gewei,
    009520              mara.volum,
    009530              mara.voleh,
    009540              mara.mstae,
    009550              mara.mstde,
    009560              mara.prdha,
    009570              marc.matnr,
    009580              marc.werks,
    009590              marc.mmsta,
    009600              marc.mmstd
    009610        into :w_ops-groes,
    009620              :w_ops-brgew,
    009630              :w_ops-ntgew,
    009640              :w_ops-gewei,
    009650              :w_ops-volum,
    009660              :w_ops-voleh,
    009670              :w_ops-mstae,
    009680              :w_ops-mstde,
    009690              :w_ops-prdha,
    009700              :w_ops-matnr,
    009710              :w_ops-werks,
    009720              :w_ops-mmsta,
    009730              :w_ops-mmstd
    009740        from sapr3.mara, sapr3.marc
    009750        where sapr3.mara.mandt = sapr3.marc.mandt
    009760          and sapr3.mara.matnr = sapr3.marc.matnr
    009770          and sapr3.mara.mandt = :p_mandt
    009780          and sapr3.mara.matnr = :w_ebs-matnr
    009790          and sapr3.marc.werks = :p_owerks
        >    ENDEXEC.
    009810  endform.                    " extract_general_data
    009820  *&
    009830  *&      Form  append_i_ops
    009840  *&
    009850  *      Appends W_OPS to I_OPS
    009860  *
    009870  form append_i_ops.
    009880    append w_ops to i_ops.
    009890  endform.                    " append_i_ops
    009900  *&
    009910  *&      Form  extract_material_description
    009920  *&
    009930  *      Extracts a Material Description from the remote database an
    009940  *      modifies the current record in I_OPS.
    009950  *
    009960  *        >P_SPRAS  Language Key
    009970  *
    009980  form extract_material_description using    p_spras.
    009990    EXEC sql performing set_langauge.
    Contents of system fields
    SY field contents..................... SY field contents............
    SY-SUBRC 0                            SY-INDEX 0
    SY-TABIX 1                            SY-DBCNT 1
    SY-FDPOS 18                            SY-LSIND 0
    SY-PAGNO 0                            SY-LINNO 1
    SY-COLNO 1
    Chosen variables
    Name.......................... Contents.1........2........3....+..
    W_EBS-PRAT4
                                  2
                                  0
    W_OPS-GROES
                                  22222222222222222222222222222222
                                  00000000000000000000000000000000
    W_OPS-BRGEW                    #######
                                  0000000
                                  000000C
    W_OPS-NTGEW                    #######
                                  0000000
                                  000000C
    regards,
    krishnaiah.

    Hi,
    This is usually a SERVER SIDE DATABASE PROBLEM or SQLNET LISTENER (server side) PROBLEM.  The client side should initially be ignored and instead the server should be investigated. In rare cases, this can be caused by client
    side memory or other resource problem, or a DLL version mismatch, but this is
    unlikely.
    Enlist the assistance of your DBA.  Then reproduce the ORA-3113 error on your
    client application.  Ask your DBA to look at the database side Alert.log and
    trace files and look for ANY activity.  Any activity that coincides with your
    ORA-3113 will be a clue.
    REgards
    Vinod

  • Error in OBIEE:Oracle Error code: 1445

    When making some formula or adding new columns,I am getting the following Err..
    State: HY000. Code: 10058. NQODBC SQL_STATE: HY000 nQSError: 10058 A general error has occurred. nQSError: 17001 Oracle Error code: 1445, message: ORA-01445: cannot select ROWID from, or sample, a join view without a key-preserved table at OCI call OCIStmtExecute. nQSError: 17010 SQL statement preparation failed. (HY000)
    Its something related to joins.Can anyone Help.
    Edited by: Darwin S on Aug 22, 2009 8:48 PM

    ORA-01445: cannot select ROWID from a join view without a key-preserved table
    Cause: A SELECT statement attempted to select ROWIDs from a view derived from a join operation. Because the rows selected in the view do not correspond to underlying physical records, no ROWIDs can be returned.
    Action: Remove ROWID from the view selection clause, then re-execute the statement.
    ROWID isn't really an intressting column when doing BI...
    regards
    John
    http://obiee101.blogspot.com/

  • Error in sxmb_moni when executing

    hi all,
    i get error in sxmb_moni  when executing (monitor for processed xml messages)
    the messages states that "system error occured during persist".how to clear this error message.

    Hi Allen
    Did you configure the right interface mapping in the interface determination? Did you activate your interface mapping? Plz have a look to transaction SXI_CACHE.
    this error is beacuse your mapping progrm might be wrong, just check the interface mapping test with mapping program ( it will be error) and with out mapping program ( no error will be there)
    cross check your mapping program any madt fields are you missing?
    Thanks!

  • Oracle error message code 1401 op 4, ORA-01401: inserted value too large fo

    Hi All
    I got this error when I try to run convert tables on our application server. Anyone know why? I am using Oracle 9i
    Here is the error message:
    Checking Table WORK_INSTRUCTION
    Table not in database
    Conversion Method - Create Table
    Creating Table WORK_INSTRUCTION
    Unable to create database table 'WORK_INSTRUCTION'
    Oracle error message code 1401 op 4, ORA-01401: inserted value too large for column
    WORK_INSTRUCTION definition as followings:
    table work_instruction;
    field identity
         used_for unique_key
         datatype identity;
    { APR 31/3/03 - Bug Nr WI4}
    field wi_admin
    {         links_to personnel . identity;}
    {         links_to location . identity;}
         links_to lab_section . identity;
    { ARP 31/3/03 - Bug Nr WI5 }
    field wi_title
    {         datatype text(20);   }
         datatype text(100);
    field version
              datatype text ( 4 );
    field wi_status
         datatype identity
         prompt_type choose
         choose_type WI_STATUS
         default 'I ' ;
    field wi_type
         datatype identity
         prompt_type choose
         choose_type WI_TYPE
         default '0 ';
    field sterlab_status
         datatype identity
         prompt_type choose
         choose_type STER_STAT
         default '0 ';
    field used_in_lims
         datatype boolean
         true_word 'Yes'
         false_word 'No'
         default 'No' ;
    { ARP WI16 28/5/03 - Extend from 10 to 45 }
    field method
         datatype text(45);
    field ref_method
         datatype text(100);
    field delegate
         links_to personnel . identity;
    field date_expire
         datatype date;
    field date_draft
         datatype date;
    field double_method
         datatype boolean
         true_word 'Yes'
         false_word 'No'
         default 'No' ;
    field technique
         datatype identity
         prompt_type choose
         choose_type TECHNIQUE
         default '0 ';
    field date_distribute
         datatype date;
    field report_date
         datatype date;
    field group_autho
         datatype text ( 16 );
    field astm_volume
         datatype text ( 6 );
    field date_non_active
         datatype date;
    field translated_in
         datatype text(10);
    { ARP WI16 28/5/03 - Extend from 60 to 2000 }
    field comments
         datatype text(2000);
    field doc_path
         datatype text ( 300 )
         prompt_type user_defined
         library 'TEST_SOP_FILE'
         routine 'file_browse';
    field modified_on
         datatype date
         used_for modified_on ;
    field modified_by
         links_to personnel.identity
         used_for modified_by;
    field modifiable
         datatype boolean
         used_for modifiable;
    field removeflag datatype boolean
         used_for remove_flag;
    { MOD TDR - 10/04/03 - Link to livelink document }
    field livelink_url
    datatype text ( 300 ) ;
    Thanks
    Li

    Verbatim from the manual:
    ORA-01401:     inserted value too large for column
    Cause:     The value entered is larger than the maximum width defined for the column.
    Action:     Enter a value smaller than the column width or use the MODIFY option with ALTER TABLE to expand the column width.You should find which value is bein attempted to be inserted into a column with a capacity shorter than the value length.
    ~ Madrid.

  • TS3258 I get error message -42408 when trying to download itunes update 11.0.2 and thus can not upgrade to latest version.  What should I do?

    I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version.  What can I do?

    Hey there davidgor2!
    I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    and the specific part of the article you will want to look at first is right here:
    "Error 42023" through "Error 42408"
    These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
    Install the latest iTunes from apple.com/itunes/download/
    Remove the SC Info folder.
    If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
    Thanks for using the Apple Support Communities!
    Regards,
    Braden

  • I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    Did you already try these suggestions?
    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    copied from Resolve specific iTunes update and restore errors

  • Firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page. What can I do?

    After opening certain websites, pogo, firefox 4.0.1 closes with no error message. When I restore the session I get: Well, this is embarrassing. Firefox is having trouble recovering your windows and tabs. This is usually caused by a recently opened web page.
    I have had this problem before and had to reinstall an earlier version of firefox.
    The error console has a long list of errors, many of them end with: does not implement nsIObserver. Is there a way to send the information on the error console to firefox support?
    Redownloading Firefox 4.0 will fix my problem until I either close firefox or turn off my computer. The problem recurs when I open firefox again.

    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * https://support.mozilla.com/kb/Firefox+crashes
    It is also possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/sessionstore.js
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
    Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
    See:
    * http://kb.mozillazine.org/Session_Restore

  • I am getting an error message -42110 when I try to download anything from Itunes on my new MacBook Pro

    I am getting an error message -42110 when I try to download anything from Itunes Store on my new MacBook Pro.

    Maybe a more appropriate place to post
    iTunes
    And if you want to discuss your MBP:
    MacBook Pro

  • I am getting an error message -41 when I try to send my project to IDVD

    I am getting and error message - 41 when i try to send my video project to IDVD. Does anyone know what i have to fix?

    Hi
    The Error -41   mFulErr  Memory full (open) or file won't fit (load) - means that memory is full
    Memory can be more than one thing
    • RAM - usually is enough and rarely give this error
    • Start-Up Hard disk - is TO FULL - very common origin to this signal
    • Other hard disks - Usually do not have any thing to do to this
    So first idea is - HOW Much free space is there on Your Start-Up (Mac OS) hard disk
    My minimum is 25Gb free space and especially if iDVD is to be used.
    This space is needed by iDVD and Mac OS temp. files and can not be addressed elswhere. Has to be here.
    Secondly - I never in any version of iMovie use - Share to iDVD - BUT I - Share to Media Browser and as Large (not HD) this I import in iDVD and result are so much better.
    Yours Bengt W

  • ITunes displays error message -69 when syncing iPhone

    hi,
    iTunes displays error message -69 when i sync my iPhone 3GS, this is just for syncing music to my iPhone. apps syncing is ok.
    can anyone help please?
    thanks

    Follow the directions in this support article:
    http://support.apple.com/kb/HT1210

  • After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes".  I cannot now access iTunes.  How can I resolve

    After having upgraded my MacBook to Snow Leopard, the following error message pops when I try to access iTunes: "The file iTunes Library.itl cannot be read because it was created by a new version of iTunes".  So, now after the upgrade, I cannot access iTunes.  How do I resolve this??
    Thanks

    zepel has it, but perhaps some more detail will help.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • Error message 9006 when trying to update os

    getting error message 9006 when attemption to update os on ipad 2

    To the original poster and Jennifer:
    Although this step is not in the Apple document, I am pretty sure I found an easier way to fix 1601, 1602 and 1604 errors at my iPhone blog -- and that is to simply switch USB ports and try again -- also make sure you are not plugging in the iPhone via a hub and that it has full USB power.
    I have no idea why the change of ports seems to work, but 49 out of 50 people who have tried it report success, so you've got nothing to lose.
    Scott

Maybe you are looking for