Oracle in OraHome92 or Oracle in Ora9025

Hi,
I have users at another company site using Oracle in Ora9025 version SQL*Plus: Release 9.2.0.5.0. We are at Oracle in OraHome92 version 9.02.00.06.
Here is my problem. I have to set strDriver = fReadRegKey(HKEY_LOCAL_MACHINE, "Software\ODBC\ODBCINST.INI\Oracle in OraHome92", "Driver") but that doesnt work in the far away group. I tried strDriver = fReadRegKey(HKEY_LOCAL_MACHINE, "Software\ODBC\ODBCINST.INI\Oracle in Ora9025", "Driver") on a remote machine out there and that doesn't work. Access could not reconize the driver name.
I was able use strDriver = fReadRegKey(HKEY_LOCAL_MACHINE, "Software\ODBC\ODBCINST.INI\Microsoft ODBC for Oracle", "Driver") but I dont know if this driver is 9i.
We are using window xp and need to read/write against oracle 10g. Does anybody know if Microsoft ODBC for Oracle is 9i? Or what I can use to get the Oracle in Ora9025 driver wroking?

The name of the Oracle driver depends on the name of the Oracle Home that was selected during installation. There could well be multiple ODBC drivers in multiple Oracle Homes on the same machine.
If there is no consistency in the naming of the Oracle Homes, you'd have to look up the name of the Oracle Home. There are a variety of places to get this
HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI
has entries for all the ODBC drivers in the system. You could look for an "Oracle in" entry (or entries). Or you could look for an "Oracle in" entry
HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\ODBC Drivers
Or, under
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
there will be a key
KEY_<<Oracle Home name>>
that will in turn have
ORACLE_HOME_KEY and ORACLE_HOME_NAME values
Justin

Similar Messages

Oracle in OraHome92 driver

Hi
I had a Windows XP machine that was just upgraded to a new XP machine. On my old PC, I had an Oracle driver "Oracle in OraHome92" that is not available on my new PC. Is there a download specifically for this driver? I do not see any Oracle drivers from Oracle on my PC.
Paul

The ODBC driver won't do you any good without an Oracle client install. Download the Oracle client software and either select Administrator install, or do a custom install and select the ODBC driver (which will automatically pull in the rest of the client software as well).
Oracle's ODBC driver gets setup in the registry during install such that it is named after the home it gets installed into. Ie, you'll have an "Oracle in OraHome92" odbc driver only if your Oracle home name is "OraHome92". If you name your Oracle home FRED, you'll get an "Oracle in FRED" odbc driver.
Hope it helps,
Greg

Oracle reports 6i to Oracle forms 10g migration

Hi,
I have .rdf files which were created on Oracle Reports 6i. I would like to migrate the .rdf files into Oracle Reports module which is present as a part of Oracle Forms 10g to generate PDF output.
Please let me know the detailed steps to be followed as I am a total newbie. Also I need to generate these reports on demand from a java 5 application (JSF 2.0).
Currently for ORacle reports 6i, I have the following code in my java application
rwrun60.exe g:\tomcat33\webapps\reports\web-inf\src\null userid=***/*** destype=FILE desformat="pdf" paramform=NO printjob=NO batch=YES desname=temp.pdf
1. What would be the equivalent for reports in ORacle Forms 10g ? I know there is an Oracle Apps server where ther report services reside. How to I invoke my report from my java application (residing on a weblogic server 10.3.6)?
2. What ould I do with the 6i .rdf files to upgrade them to 10g ?

I am trying to call an Oracle report i.e .rdf (which is located on the Oracle App Server) from my java EE 5 (JSF) application. The Oracle App server is Oracle Application Server 10g Release 2. I assume Oracle report generation capability is available in this release. I need to invoke the report from my Java JSF application on demand (whenever the user clicks a button on the web browser page, the report should appear on the browser as PDF) . My java application resides on Linux weblogic server.
Please let me know how it can be done ? I see rwclient.sh and another method to directly invoke using a URL. How do I do it on java, would a request.redirect() to the URL work ?
Also for hiding the params in the URL. keys need to be configured on the Oracle server right ?
Also if we use rwclient.sh or the URL based invocation, would there be any issue in concurrency when multiple users request the same report at the same time ?

Installation problem oracle 11g R2 on oracle enterprise linux 5 update 5

hello support,
i've installation problems with oracle 11g R2 on oracle enterprise linux 5 update 5. In the section "ORACLE Net-Konfigurationsassisten" the failure "[INS-20802] Oracle NET-Konfigurationsassistent not success". What's wrong? I've followed the instructions on http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html
I've heard the problem can occur with problems in /etc/hosts? My /etc/hosts is configured:
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1          oracle localhost.localdomain localhost
::1          localhost6.localdomain6 localhost6
is this ok? what can I do to bring the database-installation to success?
Thank's for help ;-)
Edited by: user5782904 on 09.05.2010 14:06

Here I paste you the configuration of my latest linux box which has a similar environment like yours.
# hostname
vmrhel6032.quist.ch
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032 vmrhel6032.quist.ch
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032.quist.ch
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Thanks to your post I noted that the hostname consist already of my domain entry. Try your configuration first without domain entry. It should look like:
# hostname
vmrhel6032
# domainname
(none)
# cat /etc/hosts
192.168.1.205 vmrhel6032
127.0.0.1     localhost localhost.localdomain localhost4 localhost4.localdomain4
::1           localhost localhost.localdomain localhost6 localhost6.localdomain6
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=vmrhel6032
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
HWADDR=00:0C:29:6A:98:70
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.205
#Otherwise use the first example and don't forget to restart your server resp. the network service. ;)

Data Transfer from Oracle database 10g to Oracle database 9i

Hi Experts,
We need to insert records at the speed of min 10,000 records per sec in the following condition.
Source : Oracle 10 g and Oracle 9i
We need to select the data from Oracle 10g and insert into Oracle 9i database.
Here we not allowing to create database link and also not allowing to create view or materialized view
because this two database is not on same network.
So we developing the small java application on intermediate server where we write process to get the connection of this two database servers.
From java application we call the procedure for selecting data from Oracle 10g and insert into oracle 9i database.
What is the best way to achieve?
Or You also suggest any other way to achieve
( As per this scenario materialized view is working ? )

Thanks freiser,
But it create another problem as per my business logic, There will be two database server , one is online server where online user fill the form which is generated by java, spring , hibernate and using database 10 g.
at day end i need to execute a process that transferring data from online server to offline server that is in oracle database 9i. This process is scheduled. Some security reason client do not kept this two database on same network.
My challenge is that transfer data from online server to offline server with applying client security norms.
I have option like
1) Using Oracle replication method, creating materialized view on remote server , refreshing it at regular interval. but database connectivity is not contineous, should i go for that ?
2) Write java application on intermediate server where we write process to get the connection of this two database servers. From java application we call the procedure for selecting data from Oracle 10g and insert into oracle 9i database and using flag on both data to identified how many rows are transfered and how many remaining for trasfer.
Please tell me what is best way to acheive this ?

How to install Oracle Label Security in Oracle Database 10g EE

Hello All
I just want to know how to install Oracle Label Security in Oracle 10g Database EE.
I read in Oracle Enterprise Manager Grid Control Installation and Basic Configuration that Label Security must be installed before installing Enterprise Manager Grid Control.
I have Oracle Database 10g Release 1 (10.1.0.1) on my Windows XP System, and I patch it to 10.1.0.3.
M.
Sorry about my English.

Options is to connect to Oracle Policy Manager or use Oracle Internet Directory (OID)to administer Oracle Label Security.
Find more ways in the Documentation here:
http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14267/toc.htm

Oracle 8i connector in Oracle Identity Manager 9.1.0.4????

I use the Oracle Identity Manager 9.1.0.4
The Trusted Reconciliation Souce System has Oracle 8i and Trusted Souce System have 8 Sytems.
When i would connect the Oracle 8i Database, i could not connect the Oracle 8i.
but i could connect the Oracle 10g.
I want to connect the Oracle 8i database, What should i do??????
When i create Generic Technology Connector, The Error Log is following this....
ERROR,23 12월 2009 19:37:14,026,[XELLERATE.WEBAPP],Class/Method: CreateGenConnectorAction/imageScreen encounter some problems: Provider
Exception
java.lang.Exception: Provider Exception
at com.thortech.xl.webclient.actions.CreateConnectorAction.getGenericAdapter(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.ArrayIndexOutOfBoundsException: 7
at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:989)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:292)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:508)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:203)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:33)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:510)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:154)
at org.apache.commons.dbcp.DriverManagerConnectionFactory.createConnection(DriverManagerConnectionFactory.java:51)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(GenericObjectPool.java:840)
at org.apache.commons.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:95)
at com.thortech.xl.gc.impl.common.DBFacade.getConnection(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getMetadata(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getDBType(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getSchema(Unknown Source)
at com.thortech.xl.gc.impl.recon.DBReconTransportProvider.detectMetadata(Unknown Source)
at com.thortech.xl.gc.impl.recon.DBReconTransportProvider.getMetadata(Unknown Source)
... 33 more
help me!!!!!
Edited by: mrmusso on Dec 23, 2009 2:38 AM

Well what is the error which you get while doing Trusted Recon. If its some connection error then confirm that you have required connection jar files placed in the ThirdParty folder of OIM.
I am not very sure but I thing these would be the jar files required:
Oracle 8i - classes12.jar
Oracle 10g - ojdbc.jar
so make sure you have right jar files.
Thanks
Sunny

Cannot install DBD::Oracle perl module with Oracle 11.2.0.3 client

Hi
I have been trying to install DBD::Oracle perl module on a Centos 5.7 server which is running Oracle client version 11.2.0.3. I have installed all dependencies prior to attempting installing the same and I am running into the following error -
/usr/bin/ld: skipping incompatible /app/utiba/oracle/client/lib//libclntsh.so when searching for -lclntsh
/usr/bin/ld: cannot find -lclntsh
collect2: ld returned 1 exit status
make: *** [blib/arch/auto/DBD/Oracle/Oracle.so] Error 1Here are the complete details of my attempt of installation of the perl module -
[root@tch1testuview1 DBD-Oracle-1.50]# perl Makefile.PL
Using DBI 1.52 (for perl 5.008008 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI/
Configuring DBD::Oracle for perl 5.008008 on linux (x86_64-linux-thread-multi)
Remember to actually *READ* the README file! Especially if you have any problems.
Installing on a linux, Ver#2.6
Using Oracle in /app/utiba/oracle/client
DEFINE _SQLPLUS_RELEASE = "1102000300" (CHAR)
Oracle version 11.2.0.3 (11.2)
Found /app/utiba/oracle/client/rdbms/lib/ins_rdbms.mk
Using /app/utiba/oracle/client/rdbms/lib/ins_rdbms.mk
Your LD_LIBRARY_PATH env var is set to '/app/utiba/oracle/client/lib:/lib:/usr/lib'
Reading /app/utiba/oracle/client/rdbms/lib/ins_rdbms.mk
Reading /app/utiba/oracle/client/rdbms/lib/env_rdbms.mk
WARNING: Oracle /app/utiba/oracle/client/rdbms/lib/ins_rdbms.mk doesn't define a 'build' rule.
WARNING: I will now try to guess how to build and link DBD::Oracle for you.
         This kind of guess work is very error prone and Oracle-version sensitive.
         It is possible that it won't be supported in future versions of DBD::Oracle.
         *PLEASE* notify dbi-users about exactly _why_ you had to build it this way.
Found header files in /app/utiba/oracle/client/rdbms/public.
client_version=11.2
DEFINE= -Wall -Wno-comment -DUTF8_SUPPORT -DORA_OCI_VERSION=\"11.2.0.3\" -DORA_OCI_102 -DORA_OCI_112
Checking for functioning wait.ph
System: perl5.008008 linux builder10.centos.org 2.6.18-53.el5 #1 smp mon nov 12 02:14:55 est 2007 x86_64 x86_64 x86_64 gnulinux
Compiler:   gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm
Linker:     /usr/bin/ld
Sysliblist: -ldl -lm -lpthread -lnsl -lirc -lipgo
Oracle makefiles would have used these definitions but we override them:
CC:       $(GCC)
CFLAGS:   $(GFLAG) $(OPTIMIZE) $(CDEBUG) $(CCFLAGS) $(PFLAGS)\
        $(SHARED_CFLAG) $(USRFLAGS)
           [$(GFLAG) -O2 $(CDEBUG) $(CCFLAGS) -I/app/utiba/oracle/client/rdbms/demo -I/app/utiba/oracle/client/rdbms/public -I/app/utiba/oracle/client/plsql/public -I/app/utiba/oracle/client/network/public -DLINUX -D_GNU_SOURCE -D_LARGEFILE64_SOURCE=1 -D_LARGEFILE_SOURCE=1 -DSLTS_ENABLE -DSLMXMX_ENABLE -D_REENTRANT -DNS_THREADS -DLDAP_CM $(LPFLAGS) $(PLSQLNCGFLAGS) $(USRFLAGS)]
LDFLAGS: -o $@ $(LDOBJSZ) $(LDPATHFLAG)$(PRODLIBHOME) $(LDPATHFLAG)$(LIBHOME) $(LDPATHFLAG)$(LIBHOME)stubs/ $(LDPATHFLAG)$(LIBHOME) $(LLIBIRC)
           [-o $@ -m32 -L/app/utiba/oracle/client/rdbms/lib/ -L$(LIBHOME) -L$(LIBHOME)stubs/ -L$(LIBHOME) -lirc -lipgo ]
Linking with -lclntsh -ldl -lm -lpthread -lnsl -lirc -lipgo -ldl -lm [from $(OCISHAREDLIBS)]
LD_RUN_PATH=/app/utiba/oracle/client/lib
Using DBD::Oracle 1.50.
Using DBD::Oracle 1.50.
Using DBI 1.52 (for perl 5.008008 on x86_64-linux-thread-multi) installed in /usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI/
Writing Makefile for DBD::Oracle
*** If you have problems...
     read all the log printed above, and the README and README.help.txt files.
     (Of course, you have read README by now anyway, haven't you?)
[root@tch1testuview1 DBD-Oracle-1.50]# make
Skip blib/lib/DBD/Oracle/Troubleshooting/Cygwin.pod (unchanged)
Skip blib/lib/DBD/Oracle.pm (unchanged)
Skip blib/lib/oraperl.ph (unchanged)
Skip blib/arch/auto/DBD/Oracle/Oracle.h (unchanged)
Skip blib/lib/DBD/Oracle/Troubleshooting/Vms.pod (unchanged)
Skip blib/lib/DBD/Oracle/Troubleshooting/Linux.pod (unchanged)
Skip blib/lib/DBD/Oracle/GetInfo.pm (unchanged)
Skip blib/lib/DBD/Oracle/Troubleshooting.pod (unchanged)
Skip blib/arch/auto/DBD/Oracle/dbdimp.h (unchanged)
Skip blib/lib/DBD/Oracle/Troubleshooting/Hpux.pm (unchanged)
Skip blib/arch/auto/DBD/Oracle/ocitrace.h (unchanged)
Skip blib/lib/Oraperl.pm (unchanged)
Skip blib/lib/DBD/Oracle/Troubleshooting/Sun.pod (unchanged)
Skip blib/lib/DBD/Oracle/Troubleshooting/Macos.pod (unchanged)
Skip blib/lib/DBD/Oracle/Troubleshooting/Aix.pod (unchanged)
Skip blib/lib/DBD/Oracle/Object.pm (unchanged)
Skip blib/lib/DBD/Oracle/Troubleshooting/Win64.pod (unchanged)
Skip blib/arch/auto/DBD/Oracle/mk.pm (unchanged)
Skip blib/lib/DBD/Oracle/Troubleshooting/Win32.pod (unchanged)
gcc -c -I/app/utiba/oracle/client/rdbms/public -I/app/utiba/oracle/client/rdbms/demo -I/app/utiba/oracle/client/rdbms/public -I/app/utiba/oracle/client/plsql/public -I/app/utiba/oracle/client/network/public -I/usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic   -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/CORE" -Wall -Wno-comment -DUTF8_SUPPORT -DORA_OCI_VERSION=\"11.2.0.3\" -DORA_OCI_102 -DORA_OCI_112 Oracle.c
gcc -c -I/app/utiba/oracle/client/rdbms/public -I/app/utiba/oracle/client/rdbms/demo -I/app/utiba/oracle/client/rdbms/public -I/app/utiba/oracle/client/plsql/public -I/app/utiba/oracle/client/network/public -I/usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic   -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/CORE" -Wall -Wno-comment -DUTF8_SUPPORT -DORA_OCI_VERSION=\"11.2.0.3\" -DORA_OCI_102 -DORA_OCI_112 dbdimp.c
dbdimp.c: In function â€˜fb_ary_cb_allocâ€™:
dbdimp.c:324: warning: comparison is always false due to limited range of data type
dbdimp.c:325: warning: comparison is always false due to limited range of data type
dbdimp.c:326: warning: comparison is always false due to limited range of data type
dbdimp.c:327: warning: comparison is always false due to limited range of data type
dbdimp.c:328: warning: comparison is always false due to limited range of data type
dbdimp.c: In function â€˜fb_ary_allocâ€™:
dbdimp.c:344: warning: comparison is always false due to limited range of data type
dbdimp.c:345: warning: comparison is always false due to limited range of data type
dbdimp.c:346: warning: comparison is always false due to limited range of data type
dbdimp.c:347: warning: comparison is always false due to limited range of data type
gcc -c -I/app/utiba/oracle/client/rdbms/public -I/app/utiba/oracle/client/rdbms/demo -I/app/utiba/oracle/client/rdbms/public -I/app/utiba/oracle/client/plsql/public -I/app/utiba/oracle/client/network/public -I/usr/lib64/perl5/site_perl/5.8.8/x86_64-linux-thread-multi/auto/DBI -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic   -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib64/perl5/5.8.8/x86_64-linux-thread-multi/CORE" -Wall -Wno-comment -DUTF8_SUPPORT -DORA_OCI_VERSION=\"11.2.0.3\" -DORA_OCI_102 -DORA_OCI_112 oci8.c
oci8.c: In function â€˜ora_blob_read_mb_pieceâ€™:
oci8.c:1804: warning: comparison is always false due to limited range of data type
oci8.c: In function â€˜describe_obj_by_tdoâ€™:
oci8.c:3256: warning: comparison is always false due to limited range of data type
oci8.c: In function â€˜ora_describeâ€™:
oci8.c:3480: warning: comparison is always false due to limited range of data type
oci8.c: In function â€˜ora_st_fetchâ€™:
oci8.c:3953: warning: unused variable â€˜imp_xxhâ€™
Running Mkbootstrap for DBD::Oracle ()
chmod 644 Oracle.bs
rm -f blib/arch/auto/DBD/Oracle/Oracle.so
LD_RUN_PATH="/app/utiba/oracle/client/lib" gcc -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic Oracle.o dbdimp.o oci8.o -o blib/arch/auto/DBD/Oracle/Oracle.so \
           -L/app/utiba/oracle/client/lib/ -lclntsh -ldl -lm -lpthread -lnsl -lirc -lipgo -ldl -lm      \
/usr/bin/ld: skipping incompatible /app/utiba/oracle/client/lib//libclntsh.so when searching for -lclntsh
/usr/bin/ld: cannot find -lclntsh
collect2: ld returned 1 exit status
make: *** [blib/arch/auto/DBD/Oracle/Oracle.so] Error 1I am sure that installing a previous(older) version of oracle client will fix this issue i.e. either 11.2.0.1 or older (that is tested) but I want to know if it is possible to resolve the above issue with a work around and not having to install a previous version.
Fyi.. I've tried to install DBD::Oracle version 1.24 and 1.50 but that doesn't seem to make any difference. I couldn't find any related thread either for this error so I desperately need a solution to the same(if any).
If anyone can help here, would really appreciate it or else, I will have no choice but to install previous version of oracle client.
Thanks
Edited by: 956308 on Aug 31, 2012 6:55 AM
Edited by: 956308 on Aug 31, 2012 6:57 AM

Contents of the response file:
oracle.install.responseFileVersion=http://www.oracle.com/2007/install/rspfmt_clientinstall_response_schema_v11_2_0
ORACLE_HOSTNAME=slc00caz
UNIX_GROUP_NAME=oracle
INVENTORY_LOCATION=/home/psadm1/oraInventory
SELECTED_LANGUAGES=en
ORACLE_HOME=/opt/oracle/psft/pt/oracle-client/11.2.0.x
ORACLE_BASE=/opt/oracle/psft/pt/oracle-client
oracle.install.client.installType=Custom
oracle.install.client.upgrading=false
oracle.install.client.customComponents=oracle.rdbms.util:11.2.0.3.0,oracle.javavm.client:11.2.0.3.0,oracle.sqlplus:11.2.0.3.0,oracle.dbjava.jdbc:11.2.0.3.0,oracle.rdbms.oci:11.2.0.3.0,oracle.xdk:11.2.0.3.0,oracle.network.aso:11.2.0.3.0,oracle.assistants.oemlt:11.2.0.3.0,oracle.network.client:11.2.0.3.0,oracle.odbc:11.2.0.3.0,oracle.dbdev:11.2.0.3.0
oracle.install.client.schedulerAgentHostName=
oracle.install.client.schedulerAgentPortNumber=
oracle.installer.autoupdates.option=SKIP_UPDATES
oracle.installer.autoupdates.downloadUpdatesLoc=
AUTOUPDATES_MYORACLESUPPORT_USERNAME=
AUTOUPDATES_MYORACLESUPPORT_PASSWORD=
PROXY_HOST=
PROXY_PORT=0
PROXY_USER=
PROXY_PWD=
PROXY_REALM=

Need help regarding upgrading Oracle 10g Forms to Oracle 11g Fusion Middlew

Hi All,
I am trying to create a workshop on a VM for showing the migration / upgrading of Oracle Forms 10g to Oracle 11g FMW using the Upgrade Assistant tool available in <ORACLE_HOME>/bin/ua.bat.
As per my understanding of pre-requisites:
1)     I need to install Oracle SOA Suite 10g on my VM.
2)     I also need to install Oracle SOA Suite 11g on my VM.
3)     I need to install Oracle Forms/Reports Services 10g on my Oracle SOA Suite 10g installation.
4)     I need to run Oracle Forms/reports installer on my Oracle SOA Suite 11g installation.
5)     I need to run upgrade assistant tool on my VM to upgrade my form from source(Oracle SOA Suite 10g) to destination(Oracle SOA Suite 11g). Is it mandatory for this migration that I should have Oracle SOA Suite 10g and Oracle SOA Suite 11g on the same system ?
Having all these software installed on one VM would be difficult. So just wanted to check can I avoid any software to install on VM ?
If there is any alternative suggestion then please let me know.
Regards,

What do you want to do with the SOA-suite? At least for Froms10G is is not necessary.

PL/SQL migration from Oracle 7.3 to Oracle 8.1.6

Hi,
I am planning to upgrade from Oracle 7.3 to Oracle 8.1.6. As well from HP-UX 10.20 to HP-UX 11.0.
I do not want to run my PL/SQL code in compatibility mode.
Please suggest migration path.
Also, i want to migrate PL/SQL scripts from 8.0.5 to 8.1.6 on HP-UX 11.0. I know this should be
straight forward migration.
Does the recompilation on HP-UX 11.0 with 8.1.6 environment works fine..?!
I read about the 'utlrp.sql' script to be run to find out the report prior to recompilation on target
platform. If i do this, it should enough OR is there any other ways of doing things..?!
Please post your feedback.
Thanks,
vinod

Hi,
I have never done the migration from 7.3 to 9i. But I had done 8.0 to 8i and 8i to 9i.
Pl/SQL code should work fine as it is. I wonder what will happen if you have any variables declared VARCHAR (not VARCHAR2) ? There can be few places like that, if the application was originally written on Oracle 6.Otherwise, the code should work as it is.
Regarding Pro*C, you need to use the new make file which has come with 9i.
Also, I do not remember exactly, but probably, you need to initialize all VARCHAR veriables declared between BEGIN DECLARE SECTION and END DECLARE SECTION. Initialize all of them with \0 (NULL charactor).
I think that should be enough for 7.x application to run on 9i.
Regards

(V9I) ORACLE 9I NEW FEATURE : ORACLE FLASHBACK

제품 : ORACLE SERVER
작성날짜 : 2002-11-01
(V9I) ORACLE 9I New Feature : ORACLE FLASHBACK
==============================================
PURPOSE
Oracle9i 새로운 기능인 Flashback 의 등장으로 Commit 된 Transaction 에 대해
특정 시점의 과거 DATA를 Query가 가능함으로써 Self-service repair 기능이 향상되었다.
다음 Flashback query 기능과 Setup 방법 및 실제 Data Recovery 에 관한 내용에 대해 알아보도록 한다.
Explanation
Flashback : 새로운 기능인 Flahback 은 과거 시점의 consistent view 를 볼 수있는
기능으로 system time or systme change number(SCN) 기반 read-only view이다.
다음은 Flashback 기능을 사용하기 위해 미리 설정해야할 부분에 대해 알아보도록 한다.
1) 반드시 Automatic Undo Management 에서만 가능
(initSID.ora file이나 spfile에 다음 파라미터가 auto로 설정)
UNDO_MANAGEMENT = AUTO
2) Rentention interval 을 두어 해당 time 동안은 inactive rollback 이라 하더라도
overwrite 되지 않도록 유지(초단위)
SQL> ALTER SYSTEM SET undo_retention = 1200;
UNDO_RETENTION 을 지정한 다음 실제 적용을 위해 5분정도 기다려야 한다.
3) DBMS_FLASHBACK package를 이용하여 Flashback 기능을 enable 시킨다.
SQL> call dbms_flashback.enable_at_time('9-NOV-01:11:00:00');
Example1. Flashback setup 과 date/time 설정
1) Undo tablespace 생성
SQL> create undo tablespace UNDOTBS datafile
'/database/901/V901/undotbs01.dbf' size 100M;
2) intiSID or spfile 에 다음 파라미터 적용
undo_management=auto
undo_retention=1200
undo_tablespace=UNDOTBS
3) dbms_flashback exeucte 권한 grant
SQL> connect / as sysdba
Connected.
SQL> grant execute on dbms_flashback to testuser;
Grant succeeded.
4) test table 생성
SQL> connect testuser/testuser;
Connected.
SQL> create table emp_flash as select * from scott.emp;
Table created.
SQL> select count(*) from emp_flash;
COUNT(*)
15
5) table 생성후 5분 정도 waiting -> table delete
SQL> delete from emp_flash;
15 rows deleted.
SQL> commit;
Commit complete.
SQL> select count(*) from emp_flash;
COUNT(*)
0
6) flashback 활성화
SQL> execute DBMS_FLASHBACK.ENABLE_AT_TIME(sysdate - 5/1440);
PL/SQL procedure successfully completed.
SQL> select count(*) from emp_flash;
COUNT(*)
15
SQL> execute DBMS_FLASHBACK.DISABLE;
PL/SQL procedure successfully completed.
SQL> select count(*) from emp_flash;
COUNT(*)
0
Example2. Flashback 으로 잃어버린 data recovery
1) test user 생성
SQL> connect testuser/testuser;
Connected.
SQL> create table emp_recover as select * from scott.emp;
Table created.
SQL> select count(*) from emp_recover;
COUNT(*)
15
2) delete table
SQL> VARIABLE SCN_SAVE NUMBER;
SQL> EXECUTE :SCN_SAVE := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER;
PL/SQL procedure successfully completed.
SQL> PRINT SCN_SAVE
SCN_SAVE
6.4455E+12
SQL> select count(*) from emp_recover;
COUNT(*)
15
SQL> delete from emp_recover;
15 rows deleted.
SQL> commit;
Commit complete.
SQL> select count(*) from emp_recover;
COUNT(*)
0
3) flashback 이용한 data recover
SQL> DECLARE
2 CURSOR FLASH_RECOVER IS
3 select * from emp_recover;
4 emp_recover_rec emp_recover%ROWTYPE;
5 begin
6 DBMS_FLASHBACK.ENABLE_AT_SYSTEM_CHANGE_NUMBER(:SCN_SAVE);
7 open FLASH_RECOVER;
8 DBMS_FLASHBACK.DISABLE;
9 loop
10 FETCH FLASH_RECOVER INTO emp_recover_rec;
11 EXIT WHEN FLASH_RECOVER%NOTFOUND;
12 insert into emp_recover
13 values
14 (emp_recover_rec.empno,
15 emp_recover_rec.ename,
16 emp_recover_rec.job,
17 emp_recover_rec.mgr,
18 emp_recover_rec.hiredate,
19 emp_recover_rec.sal,
20 emp_recover_rec.comm,
21 emp_recover_rec.deptno);
22 end loop;
23 CLOSE FLASH_RECOVER;
24 commit;
25 end;
26 /
PL/SQL procedure successfully completed.
SQL> select count(*) from emp_recover;
COUNT(*)
15
Reference Document
Note. 174425.1
Note. 143217.1
Note. 179851.1

I 'm sorry I can not offer the correct figure since I'm an easy-to-forget guy.
Below is extracted from other's post. wish it helps.
Oracle Security Server ---> 2 questions
High Availability Technology ---> 4 questions
LogMiner Enhancements -> 1 question
Backup & Recovery Enhancements ---> 3 questions
Data Guard ---> 3 questions
Resource Manager Enhancements ---> 2 questions
Online Operations Enhancements ---> 3 questions
Segment Management (Part I) ---> 4 questions
Segment Management (Part II) ---> 3 questions
Performance Improvements ---> 4 questions
Scalable Session Management ---> 2 questions
Real Application Clusters ---> 2 questions
File Management ---> 4 questions
Tablespace Management ---> 4 questions
Memory Management ---> 3 questions
Enterprise Manager Enhancements ---> 2 questions
by the way, I just found an enthusiast (roxylo
) posted a book about the 9i new features. It surely will help

ORA-28500: connection from ORACLE to a non-Oracle system returned this message: ORA-02063: preceding line from OWB_75

ORA-28500: connection from ORACLE to a non-Oracle system returned this message: ORA-02063: preceding line from OWB_75
Scenario:
I am having difficulty getting ODBC connection between Oracle OWB app with an 11gR2 DB (running on a VirtualBox Linux) and SQL Server 2008 running directly on the host. (Windows 8)
I am trying to take a SQL Server 2008 feed into Oracle Ware house Builder, and think(!) I have read everything and configured it in accordance (but I presume not given 3 days of failed attempts to fix it). I have also read several blogs, hence there might be a few more settings in the configuration files than the formal documentation says, but these have come from blogs that have “Solved” problems for other similar situations.
The environments:
HOST:
Name: RESOLVEIT-PC
IP: 192.168.1.80
Windows 8 (64bit) , with system DSN ODBC connection ACME_POS created with 32 bit ODBC set up (This setting still shows up fine in the 64 bit ODBC).
GUEST VM:
Name: OraDBSvr.com
GUES fixed IP Address: 192.1.200
Oracle VirtualBox (4.2.16)
Oracle Redhat Linux 6 (x86)
Oracle 11gR2 Enterprise Edition (11.2.0.1.0)
ODBC: Freetds driver
Configuration files:
initacmepos.ora
HS_FDS_CONNECT_INFO = 192.168.1.80/SQLEXPRESS/ACME_POS
HS_FDS_TRACE_LEVEL = 0
HS_FDS_SUPPORT_STATISTICS=FALSE
HS_RPC_FETCH_REBLOCKING= OFF
HS_FDS_FETCH_ROWS = 1
HS_FDS_SHAREABLE_NAME = /usr/local/lib/libtdsodbc.so
set ODBCINI=/opt/odbc/odbc.ini
# set <envvar>=<value>
odbc.ini
[ACME_POS]
Driver     = FreeTDS
Description = ODBC Connection via FreeTDS
Trace       = 1
Servername = 192.168.1.80
Database    = dbo
odbcinst.ini
[PostgreSQL]
Description                        = ODBC for PostgreSQL
Driver                   = /usr/lib/psqlodbc.so
Setup                    = /usr/lib/libodbcpsqlS.so
Driver64                              = /usr/lib64/psqlodbc.so
Setup64                              = /usr/lib64/libodbcpsqlS.so
FileUsage                           = 1
[MySQL]
Description                        = ODBC for MySQL
Driver                   = /usr/lib/libmyodbc5.so
Setup                    = /usr/lib/libodbcmyS.so
Driver64                              = /usr/lib64/libmyodbc5.so
Setup64                              = /usr/lib64/libodbcmyS.so
FileUsage                           = 1
[FreeTDS]
Discription             = TDS driver (Sybase / MS SQL)
Driver                           = /usr/local/lib/libtdsodbc.so
# Setup                         = /usr/local/lib/libtdsS.so
FileUsage                           = 1
CPTimeout               =
CPReuse                 =
[oracle@oraDBsvr etc]$
freetds.conf
#   $Id: freetds.conf,v 1.12 2007-12-25 06:02:36 jklowden Exp $
# This file is installed by FreeTDS if no file by the same
# name is found in the installation directory.
# For information about the layout of this file and its settings,
# see the freetds.conf manpage "man freetds.conf".
# Global settings are overridden by those in a database
# server specific section
[global]
        # TDS protocol version
;              tds version = 4.2
               # Whether to write a TDSDUMP file for diagnostic purposes
               # (setting this to /tmp is insecure on a multi-user system)
;              dump file = /tmp/freetds.log
;              debug flags = 0xffff
               # Command and connection timeouts
;              timeout = 10
;              connect timeout = 10
               # If you get out-of-memory errors, it may mean that your client
               # is trying to allocate a huge buffer for a TEXT field.
               # Try setting 'text size' to a more reasonable limit
               text size = 64512
# A typical Sybase server
[egServer50]
               host = symachine.domain.com
               port = 5000
               tds version = 5.0
# A typical Microsoft server
[ACME_POS]
host = 192.168.1.80
port = 60801                                # also tried 1433
instance = SQLEXPRESS
tds version = 8.0
client charset = UTF-8
tsql -LH 192.168.1.80
     ServerName RESOLVEIT-PC
   InstanceName SQLEXPRESS
    IsClustered No
        Version 10.50.4000.0
            tcp 60801
             np \\RESOLVEIT-PC\pipe\MSSQL$SQLEXPRESS\sql\query
            via RESOLVEIT-PC,0:1433
Oracle listener:
[oracle@oraDBsvr log]$ cat /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = acmepos)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = dg4odbc)
(HS = OK)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oraDBsvr)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
[oracle@oraDBsvr log]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 16-SEP-2013 13:57:41
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=oraDBsvr)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                16-SEP-2013 13:50:34
Uptime                    0 days 0 hr. 7 min. 7 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oraDBsvr/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oraDBsvr)(PORT=1521)))
Services Summary...
Service "acmepos" has 1 instance(s).
Instance "acmepos", status UNKNOWN, has 1 handler(s) for this service...
Service "dw" has 1 instance(s).
Instance "dw", status READY, has 1 handler(s) for this service...
Service "dwXDB" has 1 instance(s).
Instance "dw", status READY, has 1 handler(s) for this service...
The command completed successfully
Oracle tnsnames.ora
[oracle@oraDBsvr admin]$ cat tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
dw =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dw)
acmepos =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
(CONNECT_DATA=(SID=acmepos)
(HS=OK)
Oracle sqlnet.ora
[oracle@oraDBsvr admin]$ cat sqlnet.ora
# sqlnet.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
# Generated by Oracle configuration tools.
NAMES.DIRECTORY_PATH= (EZCONNECT, TNSNAMES)
ADR_BASE = /u01/app/oracle
I can connect from the linux server to SQL Server, and query the database:
[oracle@oraDBsvr etc]$ tsql -S acme_pos -U acme_dw_user -P acme1234
locale is "en_US.utf8"
locale charset is "UTF-8"
using default charset "UTF-8"
1> select last_name from dbo.employees;
2> go
last_name
Davolio
Fuller
Leverling
Peacock
Buchanan
Suyama
King
Callahan
Dodsworth
(9 rows affected)
1>
However, I can’t get a response through Oracle OWB , and I get:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message: ORA-02063: preceding line from OWB_75
In the hs log file I get:
[oracle@oraDBsvr log]$ cat acmepos_agt_3821.trc
Oracle Corporation --- MONDAY    SEP 16 2013 13:51:22.170
Heterogeneous Agent Release
11.2.0.1.0
HS Gateway: NULL connection context at exit
[oracle@oraDBsvr log]$
I am really stuck now and going round in circles and can’t see the wood for trees! Can anyone please help?!!
Many Thanks.
Rafe.

Let us rewrite your ODBC DSN a little bit... Your current odbc.ini looks like:
[ACME_POS]
Driver     = FreeTDS
Description = ODBC Connection via FreeTDS
Trace       = 1
Servername = 192.168.1.80
Database    = dbo
Let us change it a little bit so that we only need one config file - no odbcinst.ini nor freetds.conf file anymore:
[ACME_POS]
Driver =/usr/local/lib/libtdsodbc.so
Server = 192.168.1.80
Database
= dbo     #### I have some doubts that you have a SQL Server database called dbo - one database that always exists is master - so as a test use master here or get the real database name of the SQL Server database you want to connect
Port = 60801 ## make sure it really is the correct port - best would be to check on the SQL server and then try telnet <ip> <port> if you can connect to the SQL server
TDS_Version = 8.0
QuotedId=YES
Especially the last 2 parameters are mandatory. TDS_Version specifies the TDS Version you have to use to connect to the SQL Server and QuotedID is required for DG4ODBC as it surrounds objevt names by double quotes.
What happens now when you try to connect with for example isql - the ODBC test utility shipped with the ODBC Driver manager?
In addition, could you please do me another favour and check the word size of DG4ODBC and the ODBC Driver Manager as well as the ODBC Driver - just execute:
file /u01/app/oracle/product/11.2.0/dbhome_1/bin/dg4odbc
file /usr/local/lib/libtdsodbc.so
file < the patch to your libodbc.so library>/libodbc.so
and post the output.

ORA-28500: connection from ORACLE to a non-Oracle system

Hi, I need to connect to a OWB mysql database, but when making a query in sql plus sends me this error.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][H006] The init parameter
<HS_FDS_CONNECT_INFO> is not set. Please set it in init<orasid>.ora file.
ORA-02063: preceding 2 lines from MYSQLINK
listener.ora
# listener.ora Network Configuration File: C:\oraclebi\db\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
     (SID_NAME = PLSExtProc)
     (ORACLE_HOME = C:\oraclebi\db)
     (PROGRAM = extproc)
     (SID_DESC =
     (SID_NAME = MYSQL)
     (ORACLE_HOME = C:\oraclebi\db)
     (PROGRAM = hsodbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = bi.oratechla.com)(PORT = 1521))
tnsnames.ora
# tnsnames.ora Network Configuration File: C:\oraclebi\db\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
BISE1DB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = bi.oratechla.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bise1db)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
OTCL_MORDOR =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.31.210)(PORT = 1620))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = TEST)
MYSQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = bi.oratechla.com)(PORT = 1521))
(CONNECT_DATA =
(SID = MYSQL))
(HS = OK)
inithMYSQL.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = MYSQL
HS_FDS_TRACE_LEVEL = off
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
system dsn --> MYSQL
databaselink
CREATE PUBLIC DATABASE LINK mysqlink CONNECT TO "oracle" IDENTIFIED BY "oracle" using 'ejemplo';
Database link created.
select * from empleado@mysqlink;
ERROR at line 1:
ORA-12154: TNS:could not resolve the connect identifier specified
or
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][H006] The init parameter
<HS_FDS_CONNECT_INFO> is not set. Please set it in init<orasid>.ora file.
ORA-02063: preceding 2 lines from MYSQLINK
tnsping
C:\Documents and Settings\Administrator>tnsping MYSQL
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 06-AUG-2
010 06:31:57
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclebi\db\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = bi.orate
chla.com)(PORT = 1521)) (CONNECT_DATA = (SID = MYSQL)) (HS = OK))
OK (30 msec)

Use the setup failing with
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][H006] The init parameter
<HS_FDS_CONNECT_INFO> is not set. Please set it in init<orasid>.ora file.
ORA-02063: preceding 2 lines from MYSQLINK
There is a typo in the name of you gateway init file. You posted the content of inithMYSQL.ora but the naming is init<SID>.ora which is in your case initMYSQL.ora.
In addition please keep in mind HSODBC has been desupported since 2008 and when starting a new configuration you should use the follow up product dg4odbc (Database Gateway for ODBC) V11.

Dblink oracle to postgres with dg4odbc | ORA-28500: connection from ORACLE to a non-Oracle system returned this message: ORA-02063: preceding line

Hi, i'm trying to create database link from a database Oracle 11g to PostgreSQL with DG4ODBC, and unixODBC
my configured to /etc/odbc.ini
[PostgreSQL]
Description = Test to Postgres
Driver = psqlodbc
Trace = Yes
TraceFile = /tmp/sql.log
Database = danieldb
Servername =
UserName = SA
Password = password
Port = 5432
Protocol = 6.4
ReadOnly = No
RowVersioning = No
ShowSystemTables = No
ShowOidColumn = No
FakeOidIndex = No
my configured to /etc/odbcinst.ini
[ODBC]
CommLog=1
Debug=1
FileUsage=1
Pooling=No
Trace=1
[psqlodbc]
Description=PostgreSQL ODBC driver
Driver=/usr/lib64/psqlodbcw.so
CommLog=1
Debug=0
FileUsage=1
my configured to /u01/app/oracle/product/11.2.0/xe/hs/admin/initPostgreSQL.ora
HS_FDS_CONNECT_INFO = PostgreSQL
HS_FDS_TRACE_LEVEL = 0
HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbcpsql.so
set ODBCINI=/etc/odbc.ini
my configured to /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora
Listener =
(ADDRESS = (PROTOCOL = TCP)(HOST = oracle-poc)(PORT = 1521))
SID_LIST_LISTENER =
        (SID_LIST =
                (SID_DESC=
                        (SID_NAME=PostgreSQL)
                        (ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe)
                        (PROGRAM=dg4odbc)
                        (ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/xe/lib")
my configured to /u01/app/oracle/product/11.2.0/xe/network/admin/tnsname.ora
PostgreSQL=
        (DESCRIPTION =
                (ADDRESS = (PROTOCOL = TCP)(HOST = oracle-poc)(PORT = 1521))
                (CONNECT_DATA =
                        (SID = PostgreSQL)
                (HS = OK)
i'm try to created public database link :
CREATE PUBLIC DATABASE LINK "orapos" CONNECT TO "SA" IDENTIFIED BY "password" USING 'PostgreSQL';
when i used tnsping
[root@oracle-poc admin]# tnsping PostgreSQL
TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 16-MAY-2013 20:34:19
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/xe/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = oracle-poc)(PORT = 1521)) (CONNECT_DATA = (SID = PostgreSQL)) (HS = OK))
OK (0 msec)
and last i try to use the database link :
SQL> select * from "tabel2"@orapos
2 ;
select * from "tabel2"@orapos
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
ORA-02063: preceding line from ORAPOS
Whats wrong with my configuration??
Thank you and best regards,
Daniel

Mike,
yes i've downloaded the ODBC driver manager..
for HS_FDS_SHAREABLE_NAME i use /usr/lib/psqlodbc.so
and i get this error when i call the db link(orpos)
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
ORA-02063: preceding line from ORAPOS
for HS_FDS_SHAREABLE_NAME = /usr/lib64/psqlodbcw.so
and i get this error when i call the db link(orpos)
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
c
and when i used isql isql to call DNS(PostgreSQL) is success
whats wrong with my config?
about PostGres ODBC did you mean postgresql-odbc-08.04.0200-1.el6.x86_64 ??
Thank you and best regards,
Daniel

How can we clone the Oracle database in new Oracle Home

Hi,
I would like to clone oracle database into new oracle home. How can we set it using OEM.
I am using 10g grid control. Target db is on solaris
Thanks
Naveen

after logging into target database, under maintenance tab, data movement header; ther is "clone database" option. When you click on it; you'll see :
Clone Database uses RMAN to duplicate a database from:
-- An open database in ARCHIVELOG mode, or
-- An open database in NOARCHIVELOG mode (restart required), or
-- A saved working directory from previous cloning
Clone Database performs the following operations:
-- Backup each database file and store it in a working directory
-- Transfer each backup file from source to destination host
-- Restore each backup file to existing destination Oracle Home
-- Recover the cloned database with saved archived log files
-- Open the cloned database with resetlogs
It seems to be for cloning to a different host, but i guess you can chose the same host for source and destination. (I've never used cloning on em by the way :))
But firstly, you should create a new oracle home, you can simply copy your oracle home with a new name (cp -R /oracle/app/oracle/product/10.2.0 /oracle/app/oracle/product/10.2.0.new) or make a new installation.
I suggest you to do this cloning with CLI. You should take a full backup with RMAN, copy the oracle home, create a new initNEWSID.ora file and nomount the database, restore (or simply copy) controlfiles, restore database (with set newname commands), recover database, open resetlogs.

Oracle in OraHome92 or Oracle in Ora9025

Similar Messages

Maybe you are looking for