ORACLE OLEDB issue

Hi Experts,
We have installed the SAP PI 7.0 in our Server.
One of our application needs oleDB Provider which is not part of custom ORACLE installation of SAP PI 7.0.
Shall we install oraOLEDB provider separately and whether this installation will affect the existing oracle installtion of SAP PI 7.0 in anyway?
Kindly advise us on this issue.
Edited by: sasitharan on Jul 14, 2008 7:59 AM

Hi sasitharan,
the OleDB Provider is part of the Oracle client software.
It is not used by SAP Software but it won't affect your SAP system if you install the provider on the server where your application runs.
Note: it's not necessary to install it on the Oracle Server itself - it's just a client interface for your application.
Regards,
Lars

Similar Messages

Oracle.Oledb provider returning improper out-put

Dear All,
Need your help in below issue.
I have SSIS package which pull data from Oracle to SQL Server.
Currently I have used Oracle.Oledb provider for the same, but it is giving me improper result.
I check on oracle end count for that table was 26000 and when I run the same query through SSIS it shows 0 rows.
The preview of the query is showing 0 as output.
but when I tried the same using Microsoft OLEDB provider for Oracle it giving me proper out-put

Hi Sushant,
UseSessionFormat - specifies whether to use the default NLS session formats or let OraOLEDB override some of these formats for the duration of the session. Valid values are 0 (FALSE) and 1 (TRUE). The default is FALSE which lets OraOLEDB override some of
the default NLS session formats. If the value is TRUE, OraOLEDB uses the default NLS session formats.
Setting UseSessionFormat=true in the connection string will result in the provider using the session format specified by the client install, which should resolve this issue. The following connection string for the connection like below:
Data Source=DataSourceNameHere;User ID=UserIDHere;Password=PasswordHere;Provider=OraOLEDB.Oracle.1;Persist Security Info=True;UseSessionFormat=True;
Reference:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2012/01/20/every-bug-is-a-microsoft-bug-until-proven-otherwise.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Oracle OleDB Provider VS MS OleDB Provider

I am using Stored Procedures in Oracle Packages and Microsoft ADO for data access.
My Stored Procedure use a Ref Cursor output parameter to make data available to ADO's recordsets.
A big difference in network traffic is found between "Microsoft OLEDB Provider for Oracle" and "Oracle OLEDB Provider" (the native driver provided by Oracle).
The main issue :
<<Oracle OLEDB Provider>>
1) A stored procedure is put into an empty package for testing and returning no row, the result is 4KB downstream traffic.
2) When the SAME stored procedure is put into a large package (a package that already contained 30 other stored procedures, > 1000 lines codes), the result is 70KB downstream traffic for same call that return no row.
<<Microsoft OLEDB Provider>>
1) and 2) both use approximately 4KB downstream traffic.
However, for a query that return large number of rows (~2000 rows), Oracle OLEDB Provider used 143KB but MS OLEDB Provider used 400KB downstream.
The behaviours for upstream are similar.
My application is required utilize limited bandwidth, the the strange behaviour of the Oracle OLEDB Provider make my development of "Packaged" Stored Procedures a big problem.
Does anyone know if there are any tricky on the Oracle OLEDB Provider? Please advice, thanks in advance.
Regards,
Jeff

Sounds like the bug 2597418 that was fixed and released in 9.2.0.2 of Oracle OLEDB Provider

Sub queries with the Oracle OLEDB driver

We have been testing the Oracle OLEDB driver through VB/ADO on Win2k and have found some VERY disturbing issues. First, some background - version 8.1.7.2, using client side-disconnected recordsets.
A simple query with one or more subqueries is returning no rows when running the same query in SQLPlus returns the desired results. EX: Select a.*, (select Typename from user_types where user_types.type_id =a.type_id) user_type_name from users_group a where user_id = 5
remove the sub-select and the ORACLE OLEDB driver returns a single row. Leave it in and you get recordcount = 0 and rs.eof is true.
Can anyone explain this?
Thanks

Duplicate post:
In Trouble with the Oracle JDBC Driver version - 10.1.0.5.0
Claus,
Pardon me if I am stating the obvious, but why don't you use the 10.2 JDBC driver with your 10.2 database? The driver is part of the database distribution. Otherwise, you can download the driver from the OTN Web site.
Good Luck,
Avi.

Udl test not possible to test Oracle OLEDB provider

Hi,
I have some issue to connect to my Oracle database.
My environment is Windows Server 2008 R2, with Oracle server 11G.
To test my Oracle OLEDB provider, I setup a udl test as described follow:
1- Creation a file text document on server desktop : test.txt
2- File extension change to .udl : test.udl
3- launch of test.udl
When I launched the test.udl, The Data Link Properties dialog box is not opened. A windows explorer is opened.
Anybody knows why I am not able to launch the data link properties dialog box in my environment ?
Thank you for your help
Regards,
Sandrine

Error found... issue resolved.
Basically got the sld connections tested. This error resulted because the default abap client in CTC was wrongly set.
Regards.
Mohamamd

Append hint + ADO + Oracle OleDB Provider

Hi everybody!
This is my first post here in this great forum! ;-)
I have a problem using Append hint with Oracle OleDB Provider and I've been searching internet for an answer without any luck.
I'm trying to use Append hint with ADO + Oracle OleDB Provider (OraOLEDB.Oracle.1), like in the SQL below:
INSERT /*+APPEND*/
INTO my_table(field1, field2, field3)
SELECT 0 field1, v.field2, v.field3)
FROM my_second_table v
The problem: Oracle is still creting log for this INSERT (It is working like there was no Append hint).
If I use the same SQL statement with Microsoft Ole DB Provider for Oracle, the Append hint works as expected (log is not created), but doesn't work at all with Oracle DB Provider.
Trace shows me that the SQL sentence is ok (the append hint is there!).
I've tried Oracle servers 9.2 and/or 10g, and the problem is the same.
Question: Does Append hint work with Oracle OleDB Provider? If yes, why it is not working? Something related with connection properties?
Any help will be much appreciated!
Thanks in advance.
Alexandre Machado

user8010279 wrote:
Hi Solomon, thanks for you answer.
Is the same SQL against the same database, with the same program, using ADO + OleDB Provider.
The table is in NOLOGGING mode.
When I use Microsoft OleDB Provider for Oracle there is no log creation. Then I disconnect and reconnect to the same server/database, using Oracle OleDB Provider. Then I execute the same SQL and.... there IS log creation, meaning that in that scenario, append hint is being ignored. I can't figure out WHY!!! :-(
Alexandre,
I'm not sure what you mean by "there is log creation". In general you need to distinguish between UNDO and REDO generation. A direct-path insert (APPEND hint) doesn't generate undo but still can generate redo, depending on the ARCHIVELOG / FORCE LOGGING mode of the tablespace resp. database and the LOGGING/NOLOGGING attribute of the table.
Note that in case indexes exist on the table there will always be undo and therefore redo generation for the index maintenance as part of the direct-path insert.
You should check V$SESSION (SQL_ID in 10g, SQL_ADDRESS + SQL_HASH_VALUE in pre-10g) and V$SQL in the database to double check if the SQL passed by the Oracle OLEDB Provider actually contains the APPEND hint in case the INSERT actually generates UNDO (which is the indicator that shows you if the direct-path insert is used or not). Whether it generates REDO is - as already mentioned - depending on other factors.
So the question is how have you determined if the direct-path insert mode has been used or not?
The simplest approach to test if direct-path insert mode is used or not is to issue a query on the object inserted into after the insert before committing the transaction. If it fails with "ORA-12838: cannot read/modify an object after modifying it in parallel" then you successfully inserted using direct-path insert.
Note that there a number of restrictions that prevent the direct-path insert from happening, in those cases the APPEND hint will be silently ignored, e.g. enabled triggers, foreign keys on the table. A quite comprehensive list of restrictions is listed in the manuals here:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28313/usingpe.htm#CACEJACE
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Oracle Performance Issue

Hardware Configuration:
Regarding Oracle Performance Issue.
Configuration 1
================
SunV880 - Sunfire
32 GB RAM
14 numbers of 36GB hard disk
8 CPUs
CPU Speed 750MZ.
Software Configuration:
Oracle 8i
OS version - Solaris 8
Customized our own application - Namex
Configuration 2
================
Intel PIII - 750 MZ
2 GB RAM
2 CPUS
Software configuration
Oracle 8i
OS version linux 6.2
Customized our own application - Namex (multi threaded application)
We installed the oracle application in all hard disks. All tables
are splited in to separate hard disks.
OS installed in 1 hard disk.
namex application installed in 1 hard disk
Oracle installed in 1 hard disk.
All tables are splited in to other hard disks.
We are trying to insert some user databases in oracle table. We
achieved up to 150 records/second in Sun server. But in lower
configuration our application inserts up to 100 records/second.
(configuration 2)
We want improve our inserting database records/per rate
in Sun Server.
How to tune our oracle application parameter values in init.ora
file. Our application tries to insert up to 500 records per second.
But I can't able to achieve this value.
init.ora file
=============
db_name = "namex"
instance_name = namex64
service_names = namex64
control_files = ("/disk1/oracle64/OraHome1/oradata/Namex64/control01.ctl", "/disk1/oracle64/OraHome1/oradata/namex64/control02.ctl", "/disk1/oracle64/OraHome1/oradata/namex64/control03.ctl")
open_cursors = 300
max_enabled_roles = 145
#db_block_buffers = 20480
db_block_buffers = 604800
#shared_pool_size = 419430400
shared_pool_size = 8000000000
#log_buffer = 163840000
log_buffer = 2147467264
#large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 1014
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
timed_statistics = true # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/disk1/oracle64/OraHome1/admin/namex64/arch"
# log_archive_format = arch_%t_%s.arc
#DBCA uses the default database value (30) for max_rollback_segments
#100 rollback segments (or more) may be required in the future
#Uncomment the following entry when additional rollback segments are created and made online
#max_rollback_segments = 500
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6, RBS7, RBS8, RBS9, RBS10, RBS11, RBS12, RBS13, RBS14, RBS15, RBS16, RBS17, RBS18, RBS19, RBS20, RBS21, RBS22, RBS23, RBS24, RBS25, RBS26, RBS27, RBS28 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /disk1/oracle64/OraHome1/admin/Namex64/bdump
core_dump_dest = /disk1/oracle64/OraHome1/admin/Namex64/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /disk1/oracle64/OraHome1/admin/Namex64/udump
db_block_size = 16384
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
#sort_area_size = 65536
sort_area_size = 1024000000
sort_area_retained_size = 65536
DB_WRITER_PROCESSES=4
How to improve my performance activities on Oracle server.
Please guide me regarding this issue.
If anyone wants more info, please let me know.
Best regards,
Senthilkumar

Are you sure that it is not an application constraint ? i.e. the application can't handle so much data per second ? (application locks, threads )
Have you tried to write a simple test program, which inserts predefined data (which your application inserts) the same data, only changing keys ?
Then comparing the values from the 1st and the 2nd configuration ?
Did you check the way your application is communicating with oracle ? If it is TCP/ip (even on the local machine) then this is your main problem.
And one more thing, do you know if your application is able to run the load (inserts) of data on different threads (i.e. in parallel), because if is not, you won't be able to push the speed higher because your constraint is the speed of a single CPU. Consider running several process, which loads the data.
We had the same problem ot AIX machines with 4 cpus. Monitoring the machine, we found that only 25% (1 cpu) where in use. We had to run 4 processes to push the speed up. Check your system's overal load while running the 'load' (inserts).
log_checkpoint_interval = 10000
Check if this value is appropriate. Maybe you should set it to 0 (infinite). This will disable checkpoints on a 'number of undo record' basis. Checpoints will occure only on log switch.
How much redo files per redo groups do you have ? What is their size ? Are they on different disks ? How much redo data is generated by a single 'record' inserted ?
Hope i helped at least a little.

Oracle connector issues

Hi Experts,
We have 40 to 50 connectors including SQL server, Oracle,Pco,OLAP etc in SAP MII system.
SAP MII version 12.2 SP6.
We got the Java Heap space on the SAP MII server and due to lack of disk space the server process is shutdown.
#2.0#2015 04 14 09:30:16:473#0-400#Fatal#com.sap.engine.frame.ProcessEnvironment#
com.sap.ASJ.krn_frm.000041#BC-JAS-COR#kernel.sda#C0000A0E68F54AF20000000100000D58#307331950000768373##com.sap.engine.frame.ProcessEnvironment#Guest#0##7F961CADD61211E4A26400001251836F#7f961cadd61211e4a26400001251836f#7f961cadd61211e4a26400001251836f#0#Thread[Managed_Application_Thread_37,5,Managed_Application_Thread]#Plain##
Server process shutting down with exit code [666]; memory allocation error [OutOfMemoryError]#
#2.0#2015 04 14 09:30:16:473#0-400#Fatal#com.sap.engine.frame.ProcessEnvironment#
com.sap.ASJ.krn_frm.000041#BC-JAS-COR#kernel.sda#C0000A0E68F54AF20000000200000D58#307331950000768373##com.sap.engine.frame.ProcessEnvironment#Guest#0##7F961CADD61211E4A26400001251836F#7f961cadd61211e4a26400001251836f#7f961cadd61211e4a26400001251836f#0#Thread[Managed_Application_Thread_37,5,Managed_Application_Thread]#Plain##
Server process shutting down with exit code [666] memory allocation error [OutOfMemoryError]
[EXCEPTION]
java.lang.OutOfMemoryError: Java heap space (failed to allocate 56 bytes)
After clearing the dump and make available disk space all the connectors like SQL server, OLAP,PCo etc working fine. But Oracle connectors are unstable.I can say oracle connectors keep loosing connections. The following errors were seen in logs. After I restart the server , the oracle connector starts working fine.
Unable to create connection to database for GDW
[EXCEPTION]
java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
at com.sap.lhcommon.system.CustomClassLoader.findClass(CustomClassLoader.java:232)
at java.lang.ClassLoader.loadClass(ClassLoader.java:367)
at java.lang.ClassLoader.loadClass(ClassLoader.java:308)
at com.sap.xmii.Illuminator.tools.database.JDBCDriverManager.getClassInstance(JDBCDriverManager.java:104)
at com.sap.xmii.Illuminator.tools.database.ConnectionPool.<init>(ConnectionPool.java:62)
at com.sap.xmii.Illuminator.tools.database.ConnectionHolder.addDBConnectionPool(ConnectionHolder.java:121)
at com.sap.xmii.Illuminator.server.Server.createHolder(Server.java:277)
at com.sap.xmii.Illuminator.server.Server.start(Server.java:134)
at com.sap.xmii.Illuminator.server.ServerManager$ServerInitializer.run(ServerManager.java:451)
at com.sap.xmii.Illuminator.server.ServerManager.startServer(ServerManager.java:414)
at com.sap.xmii.Illuminator.server.ServerManager.reload(ServerManager.java:370)
at com.sap.xmii.ejb.ServiceHandlerBean.doServerFunction(ServiceHandlerBean.java:222)
at com.sap.xmii.ejb.ServiceHandlerBean.onMessage(ServiceHandlerBean.java:75)
at sun.reflect.GeneratedMethodAccessor276.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:47)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:50)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MessageListenerType.invoke(Interceptors_MessageListenerType.java:111)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:191)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:23)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:25)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:17)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Lock.invoke(Interceptors_Lock.java:21)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179)
at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:138)
at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at com.sap.engine.services.ejb3.runtime.impl.MDBProxyInvocationHandler.invoke(MDBProxyInvocationHandler.java:78)
at $Proxy435.onMessage(Unknown Source)
at com.sap.jms.client.session.JMSSession.deliverMessage(JMSSession.java:1046)
at com.sap.jms.client.session.JMSSession.run(JMSSession.java:894)
at com.sap.jms.resourceadapter.RaServerSession.run(RaServerSession.java:139)
at com.sap.engine.services.connector.jca15.work.TaskImpl.run(TaskImpl.java:410)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Error occurred while creating a database connection
[EXCEPTION]
com.sap.xmii.Illuminator.system.CommunicationException: Error occurred while creating a database connection
at com.sap.xmii.Illuminator.connectors.IDBC.IDBC.doProcessRequest(IDBC.java:81)
at com.sap.xmii.Illuminator.connectors.AbstractConnector.processRequest(AbstractConnector.java:83)
at com.sap.xmii.Illuminator.server.QueryEngine.run(QueryEngine.java:49)
at com.sap.xmii.Illuminator.services.handlers.IlluminatorService.processRequest(IlluminatorService.java:82)
at com.sap.xmii.Illuminator.services.ServiceManager.run(ServiceManager.java:69)
at com.sap.xmii.servlet.Illuminator.service(Illuminator.java:68)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:202)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:103)
at com.sap.xmii.system.SecurityFilter.doFilter(SecurityFilter.java:186)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at com.sap.xsrf.filter.XSRFProtectorFilter.doFilter(XSRFProtectorFilter.java:62)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:441)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:278)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
I am not sure of OJDBC jar file version .we have either OJDBC5 or OJDBC6 jar deployed in SAP MII.
The oracle database version that we are connecting in the data server is Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit
My questions are
After the server process shutdown and recovered , While all other connectors working fine why oracle connectors have problems?
Is it due to oracle driver issue? or any other issue related to Netweaver.
Please help.

for item #1...If you add the line "gal_enableldapsearch = FALSE" to the "[ENG]" section of the calendar server configuration file, it will only put calendar users in the GAL and not all Internet Directory users.
--Bill

JDBC-ORACLE CONNECTIVITY ISSUE WITYH OCI8 DRIVER using oracle 11g client..

JDBC-ORACLE CONNECTIVITY ISSUE WITYH OCI8 DRIVER using oracle 11g client..
I am getting below error when i m trying to access oracle db using oracle 11g client. It works with earlier oracle client versions. how do i resolve this. is there any issue with version of ojdbc6.jar that i am using??? I cant use thin driver since its an old application for which i dont have source files.
Apr 6, 2013 1:00:59 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
java.lang.UnsatisfiedLinkError: no ocijdbc9 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1682)
at java.lang.Runtime.loadLibrary0(Runtime.java:822)
at java.lang.System.loadLibrary(System.java:992)
at oracle.jdbc.oci8.OCIDBAccess.logon(OCIDBAccess.java:262)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:346)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:468)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at PettyCash.SysDate.getSysSubSys(SysDate.java:232)
at org.apache.jsp.PettyCash.index_jsp._jspService(org.apache.jsp.PettyCash.index_jsp:186)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
Code is as follow for reference
import oracle.jdbc.driver.*;
DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
conn = DriverManager.getConnection ("jdbc:oracle:oci8:@" + database,db_user, db_pass);
eNVIRONMENT VARIABLES set are as follows:
classpath
C:\Program Files\apache-tomcat-5.5.12\common\lib\servlet-api.jar;C:\Program Files\apache-tomcat-5.5.12\webapps\ROOT\WEB-INF\lib\classes12.jar;C:\Program Files\apache-tomcat-5.5.12\webapps\ROOT\WEB-INF\lib\ojdbc6.jar;
JAVA_HOME
C:\Program Files\Java\jdk1.5.0_04
PATH
C:\Program Files\Java\jdk1.5.0_04\bin
ORACLE_HOME
D:\Oracle11\product\11.2.0\client_1\BIN

Apr 8, 2013 5:24:06 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
java.lang.NullPointerException
     at org.apache.jsp.abc.index_jsp._jspService(org.apache.jsp.abc.index_jsp:280)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:322)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:432)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:868)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:663)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595)

Oracle OLEDB drive 8i and 9i truncates LONG fields

Anyone,
I have a situation where my Oracle oledb driver truncates LONG fields.
My application that runs queries using the oracle oledb driver.
The query is a join between two tables and includes a LONG as one of the fields retrieved.
When the Cursor Location is set to server the data returned is truncated.
Setting the Cursor Location to Client I can retrieve the complete data under specific cursor and lock types. The Microsoft driver for oracle does not truncate.
Note that a simple query without the join does not cause the problem.
Has anyone else noticed this? I know its quite specific.
Otherwise where do you submit bugs to oracle?
Thanks
Stuart

Hi,
I've got the same problem, i.e. SELECT a LONG RAW column from
joined/unioned tables truncates the column (via OraOleDB).
Unfortunately, setting ChunkSize to 65535 does not help me,
because data in a column are longer, then 64K (and are truncated
to 64K). Please, have you found any solution?
Thanks for any reply ..
Milan

Differences between Oracle OLEDB Provider & Microsoft version

I am trying to connect to an Oracle database from a SQL Server SSIS package. When I use the Microsoft OLEDB Provider for Oracle (MSDAORA) the connection manager in the package sees a full list of the tables in the Oracle database but when I use Oracle's own OLEDB provider (Oracle.OLEDB.1) I see a much smaller list. I cannot see anything different about the tables that Oracle's Oracle provider fails to see. Has anyone come across this phenomenon before ? Are there some table name characters or data types that the Oracle provider objects to ?

Not very likely.
One possible explanation is they query different levels of the datadictionary.
Sometimes the ALL_ level is queried, sometimes the DBA_ level, sometimes the USER_ level.
At least you need to ascertain whether you are using the same Oracle account in both drivers. This can also make a difference.
Anyhow: usually the Oracle driver implements way more functionality compared to the Microsoft driver, so the Oracle driver is to be preferred anyway.
And probably the Oracle drivers results are correct (one really should use the ALL_ level instead of the DBA_ level).
Sybrand Bakker
Senior Oracle DBA

Oracle OLEDB PRovider with ASP

hi,
Can anyone provide me a piece of code which demonstrates how to call an Oracle sp from asp using the Oracle OLEDB provider.
I would also appreciate if the Oracle package code could be provided too, since with the Provider we have to have a different code for the stored procedure (Ref cursor..??)
I have been successfully connecting using the Microsoft ODBC Driver, but looks like it has some big time bugs in it which causes our server to hang and a dllhost.exe to consume large amounts of database memory.
Anybody can help me with that?
Many Thanks,
Harshad.

Harshad,
Oracle OLEDB samples are available at
http://otn.oracle.com/sample_code/tech/windows/ole_db/content.html
URL.
"Returning multiple recordsets from a stored procedure" sample demonstrates
how REF cursors are returned from a Stored Procedure (contained in a DB package).
This sample is a stand alone application and not an ASP program, but the same code
can be helpful for ASP too.
Regards
Jagriti

Oracle OLEDB Provider

Good Afternoon:
I am having trouble running sql thru VB with the
Oracle OLEDB provider. The sql runs fine with the
MSDAORA provider. My error is 'missing right parenthesis'.
Here is the sql:
SELECT b.DIVISION_ID KEY, b.PLAN_TYPE PLAN, 900000 FS_CODE,
SUM (CASE WHEN NOT (d.PHARMACY_NETWORK_CODE IN ('9003','9004','9012') and b.CORPORATION_ID NOT IN ('U120','U180'))
then a.NET_CHECK_DUE_AMT/c.COMPLETION_FACTOR else 0 end) IN_PAY,
TRUNC (a.SERVICE_DATE,'YEAR') INCURRED_YEAR, SYSDATE
From PHARMACY_FACT a, PLAN b, COMPLETION_FACTOR c, PHARMACY_CLAIM_GROUPING d
Where a.PLAN_KEY = b.PLAN_KEY
AND a.PHARMACY_CLAIM_GROUPING_KEY = d.PHARMACY_CLAIM_GROUPING_KEY
AND c.FINANCIAL_SERVICE_SUBGROUP = 900000
AND c.MONTH_INTERVAL = MONTHS_BETWEEN(TRUNC(TO_DATE('09/30/2003','MM/DD/YYYY'),'month'), TRUNC(a.SERVICE_DATE,'MONTH'))
AND a.SERVICE_DATE BETWEEN TO_DATE('01/01/2000','MM/DD/YYYY') AND TO_DATE('07/31/2003','MM/DD/YYYY')
AND a.PAYMENT_DATE BETWEEN TO_DATE('01/01/2000','MM/DD/YYYY') AND TO_DATE('09/20/2003','MM/DD/YYYY')
AND b.PLAN_NBR NOT IN('R1','V1','V2') AND b.CORPORATION_ID IN('F275', 'P475')
GROUP BY b.DIVISION_ID, b.PLAN_TYPE, TRUNC(SERVICE_DATE,'YEAR')
When I comment out the case statement, sql runs.
I tried putting parens around other parts of the
statement but to no avail.
Any help would be greatly appreciated.
Thanks,
Mike

Sounds like the bug 2597418 that was fixed and released in 9.2.0.2 of Oracle OLEDB Provider

Oracle connect failed on x64 and IA64 platform via Oracle OLEDB provider

Hi everyone,
I installed SQL Sever on x64 and IA64 machine, and Create a database via Oracle datasource. I can connect the datasource via OLEDB and .Net provider successfully on x86 machine. But failed to connect the Oracle datasource on x64 and IA64.
Following is the error messgae:
1) Install 64 bit build on x64 machine:
Error message: Test connection failed because of an error in initializing provider. ORA-06413: Connection not open.
2) Install 32 bit build on x64 machine:
Error message: Test connection failed because of an error in initializing provider. Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
I know there is a know bug on c:\Program Files (x86)\... with Oracle provider. And some one has given a workarround method that I should move my my application out of the the folder path which includes parentheses. But it really is mess method for SQL Server (That is my application)......
Is there any other workarround method? Or when will Oracle fix this bug?
Thanks^_^
Lindsay

Is 10204 available for x64 and IA64. It is said that there is only 10204 for x86 machine, right?
I downloaded 10203 for IA64 machine and tested connection on SQL Server with Oracle datasource via Oracle OLEDB provider, and got the following error (The data source is Oracle92 installed on another machine):
Test connection failed because of an error in initializing provider. Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Could you please tell me what's wrong with it?
Thanks
Lindsay
Message was edited by:
lindsaywang

Oracle applications issue

HI
some bdy had deleted APPL_TOP/admin ( in Test instance)) .ie admin directory which contains all the files for executing adutilities, how do i recreate this directory please let me knw the ans for this immediately.
I am getting erros like this
Java_top enviornment variable is not set in the environment.
Run Appsora.env or Apps<s_contextname>.env in the environment
bye
James

Duplicate post (please post only once):
Oracle applications issue
Oracle applications issue

ORACLE OLEDB issue

Similar Messages

Maybe you are looking for